PUMPING
RROTARYVANEPUMP
The sliding vane pump
consists of a rotor turning
inside a cam that is machined
eccentrically in relation to the
rotor. As the rotor turns, the
liquid that is trapped between
the rotor, cam and vanes is
displaced. The RVP-Series
pumps are made with vanes
produced from advanced
polymers which exhibit
extremely low coefficients of
friction. The self adjusting
vanes compensate for wear
and help extend the life of the
pump. Due to its efficiency
the pumps can handle viscous
and also volatile liquids and
require less horsepower than
other equivalent pumps.
The pumps are capable of
higher flow-rates at lower
number of revolutions than
other designs.
PICTURE AND TECHNICAL DATA OF THIS CATALOGUE ARE PURELY DEMONSTRATIVE AND MAY VARY WITHOUT PREVIOUS ADVISE.
PPUMPS
OVERVIEW:RVP Series pumps are rotary vane type,self-priming, provided with integral by-passvalve to protect the pump and systemagainst overpressure.Originally designed for fuel and light petroleum products applications, SampiRVP pumps are also available in specialexecutions for industrial and chemicalproducts like solvents, resins, inks.
MAIN APPLICATIONS:
Mobile Systems (road tankers)On Road Tankers, SAMPI offers differentsolutions:• Direct drive from truck PTO throughcardan joint. • Hydraulic Motor drive with adaptor,(oil to be supplied by truck systems).• Pumping set with Diesel Engine withbaseplate to fix on truck chassis.• Customized solutions including pump,meter, hose reel, accessories, to matchinstallation requirements for any kind oftruck.
Stationary Systems (terminals, bulkplants and dispensing points)SAMPI pumps are supplied on metallicbaseplate, coupled to:• Electric motors with belt & pulley or gearbox drive.• Diesel Engines, where electric supply isnot available.• High Flow dispensers, with electricmotors, with rubber hose and nozzle, also with hose reels for long distancedispensing, marine and aviation refuelling.
RVP series pumps can be supplied uponrequest in ATEX II 2 G version (applicableto ZONE 1), also with overheat temperatureswitch (optional).
MAIN ACCESSORIES:• Strainers• Hydraulic Motor Adaptor• Pneumatic By-pass actuator
RVP20 RVP25 with Strainer
RVP30
Model
RVP20RVP25RVP30
Flange Ø
2”21/2”3”
780 RPMl/min(USgpm)
333 (88)602 (159)
-
640 RPMl/min(USgpm)
272 (72)484 (128)1026 (271)
520 RPMl/min(USgpm)
216 (57)397 (105) 814 (215)
420 RPMl/min(USgpm)
178 (47)322 (85)677 (179)
350 RPMl/min(USgpm)
145 (38)268 (71)568 (150)
275 RPMl/min(USgpm)
117 (31)220 (58)454 (120)
MAIN DATA:
EELECTROPUMPS ENGINE DRIVEN PUMPS HYDRAULIC SYSTEMS
COMMON APPLICATIONS:• Where power supply is not available• Liquids Transfer in Terminals and BulkPlants.• Combined Pumping & Metering Systems• Mobile Pumping Units
MAIN DATA:• Drive by belt & pulleys or by gearbox• TWO-cylinder Diesel Engines from 5 to28 HP.• Flow rates from 300 to 1000 l/min.• With manual or electric start (key andbatteries)• Available also in flame-proof execution
COMMON APPLICATIONS:• Liquids Transfer in Terminals and BulkPlants• High Flow Dispensers• Combined Pumping & Metering Systems• Mobile Pumping Units
MAIN DATA:• Motor Power from 1 to 30 HP (0,75 to22 kW), TEFC (IP 55) or explosion proof(ATEX) (upon request, available with voltage/frequency)• Flow rates from 100 to 1000 l/min.
COMMON APPLICATIONS:• On Road Tankers, for liquid dispensing.
MAIN DATA:• Hydraulic Motors with max continuouspower from 9 to 16,5 HP• Max continuous motor speed from 750to 775 rpm
Electropump with belt & pulleys
Electropump with gearbox Dieselengine pump Pumpset with hydraulic motor
Hydraulic motor adaptor kit for RVP
PUM
PING
SYST
EMS
DRIVE STYLEBELT & PULLEYS
Cheap and compactversion, suitable forlight applications withlow power and lowtorque at pump shaft.
Normally used with lowviscous products
GEARBOX
Suitable for high torquevalues at pump shaft,very low speed.
Recommended forheavy duty applicationsand with medium-highviscous products.
SYSTEMDIRECT TO PTO
Direct coupling to PTOthrough cardan joint.
Possible for trucksprovided with PTO withsuitable speed limitationdevice.
HYDRAULIC MOTOR
Pump with adapter andcoupling for hydraulicmotor; Truck must beprovided with highpressure hydraulic oilsystem.
Can be adapted to anyexisting system withsuitable oilcapacity/pressure.
SSAMPI SUPPLIES UPON REQUEST CUSTOMIZED MOTOR PUMP SETS, DIESEL ENGINE PUMPS AND HYDRAULIC MOTOR PUMPS AND PUMPING SYSTEMS
ELECTRIC PANELS
OVERVIEW:SAMPI offers electric panels to control anymotor pump set, either for direct or star-delta start, with local and/or remotestart/stop and emergency stop buttons,according to CENELEC, ATEX and anyother international standards.
ATEX Special electric panel
ATEX Special START-STOP electric panel
INLET FILTERS
OVERVIEW:SAMPI offers different type of filters,T-type, Basket, Separator, to match anyspecific application, flow rate, productand filtration degree.
T-type strainer for RVP pumps
Basket Strainer
ATEX Electric panel START-STOP for pumps
PUM
PING
ACCE
SSOR
IES
SAMPI CAN OFFER ALSO CONTROL PANELS CUSTOMIZED TO MATCH CUSTOMER SPECIFICATIONS
Model
RVP20
RVP25
RVP30
L1.50
(3.81)1.75
(4.45)2.50
(6.40)
M4.98
(12.66)1.75
(4.45)2.50
(6.40)
N4.13
(10.48)5.06
(12.86)5.31
(13.50)
O0.50
(1.27)0.25
(0.64)0.75
(1.90)
P0.44 Dia.
(1.12)0.44 Dia.
(1.12)0.63 Dia.
(1.58)
Q2.50
(6.35)2.75
(6.99)3.00
(7.60)
R2.50
(6.35)2.75
(6.99)3.00
(7.60)
T3.31
(8.40)3.50
(8.89)3.63
(9.20)
V3.90
(9.92)3.87
(9.87)4.95
(12.60)
W5.30
(13.46)6.05
(15.36)6.43
(16.33)
U3.90
(9.92)4.31
(10.95)5.00
(12.70)
S3.31
(8.40)3.50
(8.89)3.63
(9.20)
Model
RVP20
RVP25
RVP30
A1.125 Dia.
(2.86)1.125 Dia.
(2.86)1.125 Dia.
(2.86)
B5.18
(13.16)6.64
(146.87)6.93
(17.60)
C4.00
(10.16)4.00
(10.15)5.38
(13.70)
D3.63
(9.22)3.63
(9.22)4.25
(10.80)
E0.81
(2.06)1.50
(3.81)1.25
(3.20)
F0.81
(2.06)1.50
(3.81)1.25
(3.20)
G1.75
(4.45)2.45
(6.215)2.19
(5.60)
I8.00
(20.32)9.45
(23.99)9.63
(24.40)
K6.08
(15.44)6.80
(23.99)8.60
(21.80)
J8.00
(20.32)8.75
(22.23)9.63
(24.40)
H1.75
(4.45)2.45
(6.215)2.19
(5.60)
ALL DIMENSIONS IN INCHES AND (CENTIMETERS)
SYSTEMS
SSYSTEMS
SAMPI/LCE is able to provide a
wide set of systems for a lot of
applications. Standard systems
provided by SAMPI/LCE
consist of dispensers for the
refuelling of boats in marinas,
public transportation vehicles,
military vehicles and aircraft,
over and under-wing. Moreover
SAMPI/LCE produces complete
systems constituted of pump,
meter and hose for any use,
also in trolley-version, and
4-wheeled drums refuellers for
solvents and industrial fluids
with a fully automatic preset of
the quantity to be delivered
managed by the electronic
register. SAMPI/LCE has the
flexibility to suit any
specification a customer may
require.
PICTURE AND TECHNICAL DATA OF THIS CATALOGUE ARE PURELY DEMONSTRATIVE AND MAY VARY WITHOUT PREVIOUS ADVISE.
RREFUELLING DISPENSERS
OVERVIEW:SAMPI/LCE manufactures a wide range ofSAMPI branded refuelling dispensers from 200to 700 litres per minute.They are basically built with our flow-metersand pumps contained inside a strong stainlessor treated steel cabinet with a wide range ofaccessories such as hose reels, filter-water,separator, extra by-pass for double flow-rates,mechanical and electronic read out, pulser, etc.
MAIN APPLICATIONS:• Boat refuelling in marinas.• Public transportations vehicles.• Big truck fleets.• Trains.• Military vehicles.• Light aircraft for over-wing refuelling.• Light aircraft for under-wing refuelling.
MAIN DATA:
MODEL FOR OVERLAND REFUELLING:• MA (Model with pump and flow-meter)
MODEL FOR MARINA REFUELLING• MA (Series with pump and flow-meter)
• MA-R (Series with pump, flow-meter and hose reel)
• MA-SG (Series with flow-meter and hose reel withoutpump. Pump can be submersible or remote)
SAMPI HAS THE FLEXIBILITY TO SUIT ANY SPECIFICATION A CUSTOMER MAY REQUIRE.
MA200-RK Aviation
MA200-SGK
MA200C
MA300-RC
MA500-RK
MA500-SGC with electronic register
MModel
MA200MA300MA500MA700
Flow-rate
200 l/min300 l/min500 l/min
700 l/min
Pump
RVP20RVP25RVP25RVP30
MeterSize
2”2”2”3”
L.Hose(mt)5555
Hoseø.Hose(mt)
32x4545x5950x6460x75
Model
MA200C
Flow-rate
200 l/min
Pump
RVP20
MeterSize
2”
L.Hose(mt)5
Hoseø.Hose
(mt)32
Model
MA200-RMA300-RMA500-R
Flow-rate
200 l/min300 l/min500 l/min
Pump
RVP20RVP25RVP25
MeterSize
2”2”2”
L.Hose(mt)303025
Hoseø.Hose(mt)
32x4545x5950x64
Model
MA200-SGMA300-SGMA500-SG
Flow-rate
200 l/min300 l/min500 l/min
MeterSize
2”2”2”
L.Hose(mt)303025
Hoseø.Hose(mt)
32x4545x5950x64
CPM SKID PUMPING-METERING DRUMS REFUELLER
CPM 350-NX
Pumping-metering unit with el. register LCR-TE550and LCSound
OOVERVIEW:The SAMPI/LCE CPM are complete truckpumping and metering systems, whichcan operate with PTO or hydraulic motors.These systems comprise amulti-way valve for supply handling. CPM systems are ideal where terminalsare not provided with a pumping and/or metering system.
The main features are the following:• Pumping and metering with flow-rate
regulation.• External suction, pumping and return
into tank.• Suction from tank, pumping and
delivery without meter.
MAIN DATA:
The above-mentioned models are availablewith cabinet on request.
ModelCPM 350CPM 700
Flow-rate350 l/min700 l/min
PumpRVP25RVP30
MeterM7M15
OVERVIEW:SAMPI/LCE is able to produce metering andpumping skid on customer request. Thisconfiguration makes the installation easier andfaster, optimizing available spaces. It’s alsoavailable a special transformation kit that permitto create a 4-wheeled version.
MAIN DATA:• Two revolving and two fixed tyred wheels • Handle• Electropumps• Pump/meter hose• Meter• Meter support
Pumping-metering unit with el. register LCR-TE550
Pumping-metering unit with mechanical register
Pumping-metering unit with trolley kit
Drums refueller
Drums refueller for solvents
Drums refueller without hose
OOVERVIEW:SAMPI/LCE produces 4-wheeled drums refuellers forsolvents and industrial fluids, with fully automaticrepeatable and variable preset of the quantity to bedelivered thanks to the electronic register management of the outlet valve.
MAIN DATA:• MAX. FLOWRATE 200 L/MIN.• TE500 electronic register.• SAMPI pump RVP20.• M7C6 SAMPI/LCE meter.• Pneumatic 980 SAMPI nozzle.• Gearbox.• 4 poles motor EEx-d – ATEX 2HP.• 1 trolley with 4 wheels containing all the
equipment above.• Mt. 10 Celloflex hose 14.100 GGR D.40 complete
with couplings (outlet).• Mt. 5 Celloflex hose 14.100 GGR D.50 complete
with couplings (inlet).
CCABINET HOSE REELS
OVERVIEW:These reels consists essentially of:• Hose reel.• Cabinet• Swivel joint with coupling for product inlet.• Hose slider.• Hose rewind system (electric or manual).
MAIN ACCESSORIES:• FLEXIBLE DELIVERY HOSE• NOZZLE• END FITTINGS
HOSE REELS
OVERVIEW:SAMPI produces a wide set of reels forhoses and nozzle equipped hose rewinds,provided with swivel joint to the inlet connection with fixed and flexible piping.
MAIN APPLICATIONS:• TERMINALS• REFUELLING SUPPLIER (FIXED OR
MOVABLE)• TRUCKS (ALSO BEHIND THE CABIN)
These reels consists mainly of:• Hose reel.• Reel preservation carter (for electric
rewind system only).• Swivel joint with coupling for
product inlet• Frame (in painted iron).• Hose slider.• Hose rewind system (electric or manual).• Wheels (2 fixed and 2 revolving) in
4-wheeled versions.• Inlet back check valve (for 4-wheeled
version only).
MAIN ACCESSORIES:• FLEXIBLE DELIVERY HOSE• BASE• 4-WHEELED KIT• NOZZLE• END FITTINGS
Horizontal hose reel Vertical hose reel
Hose reels with nozzle
Hose reel with meter and mechanical register
Large hose reel with cabinet
Small hose reel with cabinet
Hose reel with stainless steel cabinet