Transcript
Page 1: Quality control techniques for food safety

Quality Control TechniquesFor Food Safety

Page 2: Quality control techniques for food safety

Quality

• Food quality is a sensory property that includes appearance, taste, nutritional value (nutrient content), health benefit (functional ingredient) or safety (chemical, physical, biological).

• It includes those attributes which affect consumer’s choice for a product.

Page 3: Quality control techniques for food safety

Need For Quality Food•Major challenge for food industry is to maintain the food quality ; the reason being well aware consumers.•For this reason food industry has to adopt certain techniques in order to meet the growing need of maintaining food quality; this is known as food quality control.•The main issue which is considered while quality control process is to deteriorate the level of microbes and other contaminants in food.

Page 4: Quality control techniques for food safety

Techniques

Ultrasound : Energy derived from sound wavesIrradiation: Energy derived from ionising radiations

Cold Plasma Technique: Energy derived from plasma

Page 5: Quality control techniques for food safety

Ultrasound

Page 6: Quality control techniques for food safety

What is Ultrasound?

• It is a form of energy generated by sound waves of frequencies that are too high to be detected by human ear, i.e. above 16 kHz.

•Ultrasound can propagate in gases, liquids and solids.

•Considered to be technologies that were developed to minimize processing and maximize quality and safety in food

•These applications include improvement in microbial inactivation, food preservation, manipulation of food texture and food analysis.

Page 7: Quality control techniques for food safety

Physics of Ultrasound• The sound waves travel effectively through liquids which are comprised of closely compacted

molecules • Sound is transmitted as sequential sine waves whose height represents amplitude or loudness.• A single full cycle is measured from peak to peak, and the number of these cycles per one

second represents the frequency. The frequency is described in Hertz [Hz] which by convention is in honor of the German physicist Heinrich Hertz for his work on electromagnetic transmission.

Page 8: Quality control techniques for food safety

How can Ultrasound be applied in Food ?• Ultrasound when propagated through a biological structure induces compressions

and depressions of the particles and a high amount of energy is imparted.

In food industry, the application of ultrasound can be divided based on range of frequency:

low power ultrasoundhigh power ultrasound

Page 9: Quality control techniques for food safety

Low Power Ultrasound:

• Low energy [low power, low intensity] ultrasound

Principles of LPU for Food Analysis: • It uses a small power level that the waves cause no physical and chemical alteration

in the properties of the material through which it passes.

• This property is been utilized for non-invasive analysis and monitoring of various food materials during processing and storage to ensure quality and safety.

• Ultrasonic velocity (v) is determined by density (ρ) and elasticity (E) of the medium, according to the Newton-Laplace equation (Blitz, 1963).

Page 10: Quality control techniques for food safety

Newton-Laplace Equation:

•The Newton-Laplace equation is the starting point for the determination of isentropic properties of solution, using the speed of sound u and density (ρ).

•This equation implies that the ultrasound velocity of the solid form of a material is larger than that of its liquid form.•In food industry, the sensitivity of ultrasound velocity to molecular organizations and intermolecular interactions makes UVM – Ultrasound Velocity Measurements suitable for determining composition, structure, and physical state of different food materials. •It also helps in detection of foreign bodies and defects in processed and packaged food.

Page 11: Quality control techniques for food safety

Why Low Power ? • Can provide information about the physiochemical

properties of food materials, their composition, structure and physical state.

• The major advantage of this technique over other traditional techniques is that the measurement is so rapid and non-destructive.

Page 12: Quality control techniques for food safety

Applications of Low Power Ultrasound

• In Meat Technology • In Fruits and Vegetables• In Cereal products• Ultrasonic monitoring for food freezing

Page 13: Quality control techniques for food safety

High Power Ultrasound:

• High energy [high power, high intensity] ultrasound• 20 and 500 kHz• Disruptive and enforce effect on the physical, mechanical, or

biochemical properties of foods. These effects are promising in food processing, preservation and safety.

Page 14: Quality control techniques for food safety

The chemical and biochemical effects are effective tools for sterilizing equipments, preventing contamination of food processing surfaces by pathogenic bacteria and removal of bacterial biofilms.

Principle of HPU  

Factors that affect power ultrasound are energy, intensity, pressure, velocity and temperature.

Where, Pa is the acoustic pressure (a sinusoidal wave), which is dependent on time (t), frequency (f) and the maximum pressure amplitude of the wave.

Pa max is related to the power input or intensity (I) of the transducer:

I = Pa max/ 2ρv , where ρ is the density of the medium and v is the sound velocity in the medium.

Mechanical Chemical and Biological Effects:

Page 15: Quality control techniques for food safety

Why HPU ?Ultrasonic Inactivation of Microorganism

• The most common techniques currently used to inactivate microorganisms in food products are conventional thermal pasteurization and sterilization.

• Thermal processing does kill vegetative microorganisms and some spores; however, its effectiveness is dependent on the treatment temperature and time.

• The magnitude of treatment, time and process temperature is also proportional to the amount of nutrient loss, development of undesirable flavors and deterioration of functional properties of food products.

Page 16: Quality control techniques for food safety

• High power ultrasound is known to damage or disrupt biological cell walls which will result in the destruction of living cells.

• Unfortunately very high intensities are needed if ultrasound alone is to be used for permanent sterilization. However, the use of ultrasound coupled with other decontamination techniques, such as pressure, heat or extremes of pH is highly applicable.

Thermosonic (heat plus sonication), manosonic (pressure plus sonication), and manothermosonic (heat plus pressure plus sonication) treatments are likely the

best methods to inactivate microbes, as they are more energy – efficient and effective in killing microorganisms.

Page 17: Quality control techniques for food safety

The advantages of ultrasound over heat pasteurization include: Minimizing of flavor loss, greater homogeneity and significant energy savings.

The effectiveness of an ultrasound treatment is dependent on the type of bacteria being tested, amplitude of the ultrasonic waves, exposure time, volume of food being processed, the composition of food and the treatment temperature.

Page 18: Quality control techniques for food safety

Ultrasound in Food Industry

• Major Significance to Industry and Consumers

• Better quality and Healthy Food

• High Efficiency

• Saves Energy and Costs

Page 19: Quality control techniques for food safety

Food Irradiation

Page 20: Quality control techniques for food safety
Page 21: Quality control techniques for food safety

Process involved• packaged food is passed through a radiation chamber on a conveyor belt • It is passed through a radiation beam, like a large flashlight, instead of

coming in direct contact with the radioactive materials

Page 22: Quality control techniques for food safety

How does Food Irradiation Works?• Food is exposed to a carefully measured amount

of intense ionizing radiation. • When food is irradiated, the radiation energy

breaks the bonds in the DNA molecules of microorganism. Thus, the organism dies or becomes unable to reproduce.

• Frozen foods take larger radiation dose to kill microbes.

• The effectiveness of the process depends on the organism’s sensitivity to irradiation.

Page 23: Quality control techniques for food safety

• The food irradiation process uses three types of ionizing radiation sources:

cobalt-60 gamma sources : most commonly used as they can deeply penetrate into food

electron beam generators x-ray accelerators gamma rays

Page 24: Quality control techniques for food safety

Dose Effects• Absorbed dose is measured as the quantity of radiation imparted per unit of mass of a

specified material. • The unit of absorbed dose is the gray (Gy) where 1 gray is equivalent to 1 joule per

kilogram.• Low doses (up to 1 kGy) inhibit sprouting in tuber, bulb and root vegetables, inhibit

the growth of asparagus and mushrooms, and delay physiological processes (ripening, etc.) in fruits

• Medium doses (1 to 10 kGy) extend the shelf life, eliminate spoilage and pathogenic microorganisms

• High doses (10 to 50 kGy) can be used for industrial sterilization and decontamination of certain additives or ingredients

Page 25: Quality control techniques for food safety

• Parasites and insect pests, which have large amounts of DNA, are rapidly killed by an extremely low dose of irradiation.

• It takes more irradiation to kill bacteria, because they have less DNA.• Viruses are the smallest pathogens that have nucleic acid, and they are, in general,

resistant to irradiation at doses approved for foods.

• Another useful effect: it can be used to prolong the shelf life of fruits and vegetables because it inhibits sprouting and delays ripening. 

Page 26: Quality control techniques for food safety

IMPACT !!It has been studied that when irradiation is used as

approved on foods:• Disease-causing microorganisms are reduced or

eliminated• The nutritional value is essentially unchanged• The food does not become radioactive• Irradiation is a safe and effective technology that can

prevent many food borne diseases.

Page 27: Quality control techniques for food safety

Considering its potential role in the reduction of post-harvest losses, providing safe supply of food and overcoming quarantine barriers, food irradiation has received wider government approvals during the last decade.

There is also a trend towards increased commercialization of irradiated food. Currently, there are 47 irradiation facilities in some 23 countries being used for

treating foods for commercial purposes.

Current Scenario

Page 28: Quality control techniques for food safety

Advantages• kill many insects and pests that infest foods like grains, herbs and spices without

appearing to affect them• kill or considerably reduce the level of dangerous micro organisms in foods such as

salmonella and campylobacter in raw meat and poultry.• Listeria in ready to eat foods like hot dogs• Delay or stop normal ripening and decay processes so that foods can be stored for

longer• Irradiation can successfully replace the fumigation treatment of cocoa beans and

coffee beans and disinfest dried fish, dates, dried fruits, etc.

Page 29: Quality control techniques for food safety

• One of the most important advantages of food irradiation processing is that it is a

cold process which does not significantly alter physico-chemical characters of the treated product.

• It can be applied to food after its final packaging

Page 30: Quality control techniques for food safety
Page 31: Quality control techniques for food safety

Are irradiated foods still nutritious?

• Their nutritional value doesn’t change • levels of the Vitamin - Thiamine are slightly reduced, but not enough to result in

vitamin deficiency. • no significant changes in the amino acid, fatty acid, or vitamin content of food.• the changes induced by irradiation are so minimal that it is not easy to determine

whether or not a food has been irradiated.• A big advantage of irradiated food, is that it is a cold process: the food is still

essentially “raw”, because it hasn’t undergone any thermal process. 

Page 32: Quality control techniques for food safety

Disadvantages• Is used on a very limited range of foods as it is an expensive technology • Affects some important constituents of foods, for example, vitamin E levels can

be reduced by 25% after irradiation and vitamin C by 5-10%• Radiation doses at the levels recommended will not kill all micro organisms, 90%

may be destroyed so need to handle with care otherwise remaining organisms can reproduce rapidly

• Ineffective against viruses - as they are the smallest pathogens that have DNA or RNA, and they are relatively resistant to irradiation at the levels approved for foods.

Page 33: Quality control techniques for food safety

• Prions, such as the one that causes “mad cow” disease (bovine spongiform encephalopathy, or BSE), have no DNA, so they also are not affected by irradiation at the levels approved for foods.

• Can create new substances called Radiolytic products. While this does not mean that the food is radioactive, there is considerable controversy over whether these products are unique and if so whether they are dangerous.  

Page 34: Quality control techniques for food safety
Page 35: Quality control techniques for food safety

Cold Plasma Technology

Page 36: Quality control techniques for food safety

Current Scenario

• Preferences of the consumers have shifted towards healthy, tasty foods, which are readily available, ready to eat and easily stored

• Challenge to Food Industries – providing such foods in a form suitable for distribution and mass production without affecting texture, flavour, and color, is technically complex and expensive.

Page 37: Quality control techniques for food safety

What is Cold Plasma Technology ?• Cold Plasma Technology is a novel, non thermal food processing technology that uses

energetic and reactive gases to inactivate contaminating microbes in food products ( E.g..

meat, poultry, etc.,)

• Plasma is a mixture of positive and negative charges as well as neutral particles and

photon. Plasma exist over a massive range in temperatures and densities.

• It is estimated that 99% of the known universe is in a plasma state. The sun and stars are

examples of natural plasmas

Page 38: Quality control techniques for food safety

Generation of Plasma

• Man-made plasma can be generated at low temperatures typically by applying a

voltage to a gas. The electric field generated from the applied voltage can accelerate

any free electrons in the gas.

• Accelerated electrons collide with gas atoms to excite or ionise them. Ionisation of

gas atoms releases more electrons; this cascaded reaction can generate a rich

abundance of highly reactive chemical species which are capable of inactivating a

wide range of microorganisms including food borne pathogens and spoilage

organisms.

Page 39: Quality control techniques for food safety
Page 40: Quality control techniques for food safety
Page 41: Quality control techniques for food safety

Cold Plasma Technology in Foods

• Cold Plasma Technology in food Industry relies on gas discharge technology - an effective, economical, environmentally safe method for critical cleaning.

• The vacuum ultraviolet (VUV) energy is very effective in the breaking most organic bonds (i.e., C-H, C-C, C=C, C-O, and C-N) of surface contaminants. This helps to break apart high molecular weight contaminants.

Page 42: Quality control techniques for food safety

• A second cleaning action is carried out by the oxygen species created in the plasma (O2+, O2-, O3, O, O+, O-, ionised ozone, excited oxygen, and free electrons).

• These species react with organic contaminants to form H2O, CO, CO2, and lower molecular weight hydrocarbons.

• The resulting surface is ultra-clean/sterilised. The plasma activated atoms and ions cause molecular ‘sandblasting’ and can break down organic contaminants.

Page 43: Quality control techniques for food safety

Cold plasma can be used for decontamination of products where micro-organisms are externally located.

Unlike light ( UV decontamination), plasma flows around objects, which means ‘Shadows Effects’ do not occur ensuring all parts of a product are treated.

For products such as cut vegetables and fresh meat, there is no mild surface decontamination technology available currently, cold plasma could be used for this purpose.

Can also be used to disinfect surfaces before packaging or included as packaging process

Page 44: Quality control techniques for food safety

https://www.youtube.com/watch?v=AC2q4TsDHrY

Page 45: Quality control techniques for food safety
Page 46: Quality control techniques for food safety
Page 47: Quality control techniques for food safety

• Illustration – Sterilization capability of Cold plasma

• E.coli – inoculated in to 3 Petri dishes. • One dish was left as a control with no plasma

exposure, another was exposed for 30s of plasma treatment, and a third was exposed for 120 seconds.

• The bacterial kill zone was progressively higher with longer

plasma exposure

Page 48: Quality control techniques for food safety
Page 49: Quality control techniques for food safety

• Common pathogen – Unprocessed meat – 70% Salmonella

• Plasma Torch - Applied for 180s, • Plasma eliminated or subsequently reduced low levels

of bacteria from both skinless chicken and chicken skin itself.

Page 50: Quality control techniques for food safety

 • Plasma is used as a method for killing 

Salmonella on egg shells.• Askild Holck, senior research scientist at  Nofima:

“By using plasma treatment, we have succeeded in removing 99.5 per cent of all bacteria on the egg shell but because this is a 

gentle method, the egg yolk and white are unaffected."

Bacteria free eggs with plasma technology‐ .

Page 51: Quality control techniques for food safety
Page 52: Quality control techniques for food safety

Concerns !!

• Important aspects of this technology are still immature, particularly with respect to its use with food nutrition

• We do not know how cold plasma inactivates spores or how the cold plasma – specifically the electronically excited molecules – interact with the food or packaging materials, or the stability of the plasma for large-scale commercial operation.

• Need to determine optimum operating conditions for a given application - Safety of treated products.

Page 53: Quality control techniques for food safety

What's Next ??

Page 54: Quality control techniques for food safety

References T.J. Mason, L. Paniwnyk, J.P. Lorimer. Ultrasonics Sonochemistry 3 (1996), The uses of

ultrasound in food technology, Pages S253-S260 Retrieved from http://www.vscht.cz/ktk/www_324/studium/konzervace/pdf/ultrazvuk.pdf   Hao Feng, Gustavo V.Barbosa-Canovas, Jochen Weiss. Ultrasound technologies for Food and

Bioprocessing. Food engineering series, pages 1-10 Retrieved from http://books.google.ca/books?

id=jHRczaYL18C&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=false

  Erika Kress-Rogers and Christopher J.B. Brimelow, Woodhead publishing in food science and

technology, Instrumentation and sensors for the food industry-second edition. Pages 361-390  Zbigniew J. Dolatowski, Joanna Stadnik, Dariusz Stasiak ,Application of ultrasound in food

technology, Acta Sci. Pol., Technol. Aliment. 6(3) 2007, 89-99

Page 55: Quality control techniques for food safety

References http://rspublication.com/ijeted/may-12/89.pdf http://ccr.ucdavis.edu/irr/how_food_irr.shtml http://www.stockandland.com.au/news/agriculture/horticulture/generalnews/

irradiation-pros-and-cons/2665981.aspx

Page 56: Quality control techniques for food safety
Page 57: Quality control techniques for food safety

Presented by

• Naveen Cheema [300774182]• Navdeep Bains [300769430]• Basani Prashanth Reddy [300778111]• Romil Patel [300779128]• Bharath Battina [300776818]• Jithin M J [300778750]


Top Related