WWW.THALERMETAL.COM
Solution to ALL YOUR ROOFING NEEDS
ROOF SPECIALTY PRODUCTS &FALL PROTECTION SYSTEMS
ABOUT THALER METALThe Thaler Metal Industries Limited story starts around 1969 when Ken Thaler, formerly the Chief Estimator/Supervisor with a large roofing company in the 1950s and 1960s, recognized the need for a higher quality of roofing specialty products such as flashings, vents, roof drains, and other roof protrusion products. The high incidence of roof leaks, maintenance and labour intensive roofing specialty products inspired Ken to design and promote a superior line of roofing accessories that continue to be unequalled today.
FLOURISHING AMID THE CHALLENGES OF THE ROOFING INDUSTRYFrom the 1970s to the 2000s, Thaler developed, engineered and honed a multitude of roofing accessory products including mechanical and electrical protrusion flashings, roof supports (all disciplines), air vents, relief vents, suspended maintenance fall production safety anchors, davit arms and roof drains. All Thaler products have a number of Value Added features that should be considered when trying to equate the Or Equal Factor.
FOR EXAMPLE, THE SINGLE MOST IMPORTANT DEVELOPMENT AT THE CENTRE OF THE COMPANYS ACCOMPLISHMENTS AN INDUSTRY FIRST IS THE INVENTION, BY KEN THALER, OF UNIQUE PATENTED EPDM FLASHING SEALS FOR MECHANICAL AND ELECTRICAL ROOF PENETRATIONS. IN GENERAL, ALL ROOF PENETRATIONS ARE SUBJECT TO THE HARMFUL EFFECTS OF CONDENSATION THAT IS RESPONSIBLE FOR UP TO 80% OF ALL ROOF LEAKS.
Today however, the Thaler EPDM Base Seal eliminates condensation and condensation buildup from below, and the Thaler EPDM Triple pressure Grommet Seal eliminates flashing leaks from above. The implementation of these EPDM flashing seals in a wide array of Thaler roofing products represent a new generation of roofing products that meet the requirements of air leakage control better than any protrusion type flashings on the market today.
THALERS COMMITMENTIn keeping with a tradition for being innovative, Thaler is constantly thinking of new and better ways to enhance roofing system performance recognized dependability. Thaler always has a better idea (keep an eye on our advances in speciality products for metal roofs). Construction professionals will continue to benefit from Thalers commitment to providing state-of-the-art, consistently better roofing products while assuring architects, engineers, roofing consultants, specifiers, contractors, and building owners 100% roof penetration protection - an affirmation backed by the THALER 20 YEAR WARRANTY.
THALER METAL Synonymous with the VERY BEST in ROOFING PERFORMANCE and DEPENDABILITY.
Mission Statement - Business Philosophy
PG DIVISIONS
TABLE OF CONTENTS
Exhaust Vent Flashings
Stack Jack Flashings
Mechanical & Electrical Flashings
Architectural Roof Supports
Mechanical & Electrical Roof Supports
1
3
2
4
5
7
9 Relief Vents
10 Gravity Air Vents
11 Fall Arrest Roof Anchors (FARA) - TWA - Econo Anchor
13 Split Flashings
14 Horizontal Lifeline Systems
15 Roof Drains
17 Planning & Engineering Services
19 Roof Replacement Accessories
MISSION STATEMENT
To conscientiously listen to the needs of our partnering patrons and be obligated and accountable to provide technical knowledge, superior quality products and service they need to benefit their business.
KEN THALER
THALER BUSINESS PHILOSOPHY
Research, design and produce a range of roofing products that will outperform and provide longer life than any similar products being offered to the building industry.
1 |
CONCRETE DECK STEEL DECK
4"(102 mm)
7"(1
78 m
m)
13" o
r 19"
(330
or 4
83 m
m)
PATENTED
PREMOULDED TO INNER
(ALUMINUM, COPPER AND
EMBED DECK FLANGEIN LAYER OF PLASTIC CEMENT
TRIPLE PRESSURE GROMMET SEAL
EPDM BASE SEAL BONDED TO METAL SLEEVE
STAINLESS STEEL)
STACK JACK FLASHINGTHALER NEW-STANDARD
URETHANE INSULATION
SIDE OF SLEEVE
TRADE SIZES2 (51 mm)3 (76 mm)4 (102 mm)5 (127 mm)6 (152 mm)
MODEL HEIGHT
SJ-37 7 (178 mm) highSJ-38 13 (330 mm) highSJ-39 19 (483 mm) high
NEW-STANDARD STACK JACK FLASHING (Insulated)
CONVENTIONAL ROOFINGILLUSTRATED
INVERTED ROOFING ILLUSTRATED
VENT PIPE
STACK JACK FLASHINGS | 2
STACK JACK FLASHINGSTM
SJ-26 / SJ-27Removable CapSTACK JACK FLASHINGTM
SJ-37 / SJ-38 / SJ-39STACK JACK FLASHINGTM
SJ-31 VandalproofSTACK JACK FLASHINGTM
SJ-44 / SJ-45Sloped RoofSTACK JACK FLASHINGTM
SJ-33Vandalproof Vent CapSTACK JACK FLASHINGTM
SJ-VPC VandalproofSTACK JACK FLASHINGTM
SJ-24 / SJ-25Removable CapSTACK JACK FLASHINGTM
SJ-34 / SJ-35 / SJ-36STACK JACK FLASHINGTM
SJ-26 / SJ-27Removable CapSTACK JACK FLASHINGTM
SJ-37 / SJ-38 / SJ-39STACK JACK FLASHINGTM
SJ-31 VandalproofSTACK JACK FLASHINGTM
SJ-44 / SJ-45Sloped RoofSTACK JACK FLASHINGTM
SJ-33Vandalproof Vent Cap
SJ-VPC VandalproofSTACK JACK FLASHINGTM
SJ-24 / SJ-25Removable CapSTACK JACK FLASHINGTM
SJ-34 / SJ-35 / SJ-36STACK JACK FLASHINGTM
EXHAUST VENT FLASHINGS
EVF-1 / EVF-2Exhaust Vent Flashing
EVF-1Exhaust Vent Flashing
EVF-1 / EVF-2Exhaust Vent Flashing
EVF-1Exhaust Vent Flashing
EVF-3 / EVF-4Exhaust Vent Flashing
3 | EXHAUST VENT FLASHINGS
MODEL HEIGHT
EVF-1 12 (305 mm) highEVF-2 12 (305 mm) high
EXHAUST VENT FLASHINGSPatented
EPDM BASE SEAL BONDEDTO METAL SLEEVE (SEETHALER EPDM FLASHINGSEALS LITERATURE)THALER EXHAUST VENT
FLASHING (ALUMINUM,COPPER OR STAINLESSSTEEL)
REMOVABLE HOOD (ALUMINUM,COPPER ORSTAINLESS STEEL)
4 (102 mm)
TRADE SIZES3 (76 mm)4 (102 mm)5 (127 mm)6 (152 mm)7 (178 mm)8 (203 mm)9 (229 mm)
10 (254 mm)
STEEL DECK CONCRETE DECK
CONVENTIONAL ROOFINGILLUSTRATED
EXHAUST VENT
EVF-2(PERFORATED COLLAR)
URETHANE INSULATIONPRE-MOLDED BETWEENINNER AND OUTERSLEEVE
EVF-1 (SLOTTED COLLAR)
CHERRY RIVETS HAVING8274 kPa (1200 psi)SHEARING STRENGTH
STAINLESS STEELSCREWS (TWO TOTAL)
12
(305
mm
)
Add suffix -A for Aluminum or -Cfor Copper to Model No. e.g. EVF-1-A, etc.
MECHANICAL & ELECTRICAL FLASHINGS | 4
MECHANICAL & ELECTRICALFLASHINGS
MEF-1Rigid Conduit Flashing
MEF-2AFlexible Conduit Flashing
MEF-3AHot Pipe Flashing
MEF-AE1 Type BRigid Conduit Flashing
MEF-4AB Vent Flashing
MEF-AE1 Type ASingle Rigid Conduit Flashing
MEF-2A1Liquid Tight FlexibleConduit Flashing
MEF-9Modcon Gas Pipe Flashing
MEF-1Rigid Conduit Flashing
MEF-2AFlexible Conduit Flashing
MEF-3AHot Pipe Flashing
MEF-AE1 Type BRigid Conduit Flashing
MEF-4AB Vent Flashing
MEF-AE1 Type ASingle Rigid Conduit Flashing
MEF-2A1Liquid Tight FlexibleConduit Flashing
MEF-9Modcon Gas Pipe Flashing
MEF-2A/MEF-2A1/MEF-2A2 LIQUID TIGHT FLEXIBLE CONDUIT FLASHINGPatented
EPDM BASE SEAL, BONDED TO METAL BASE (SEE THALER EPDM FLASHINGSEALS LITERATURE)
THALER MEF-2A LIQUIDTIGHT FLEXIBLE CONDUITFLASHING
CONCRETE DECKSTEEL DECK
EMBED DECK FLANGE IN LAYER OF PLASTIC CEMENT
LIQUID TIGHT FLEXIBLE CONDUIT (BY OTHERS)
#14 x 2, COUNTERSUNK STAINLESSSTEEL SCREWS (QUANTITY DIFFERSBETWEEN MODELS).
EPDM END CAP SEAL, FRICTION FIT TO METAL PIPE (SEE THALER EPDM FLASHINGSEALS LITERATURE)
WOOD BLOCKING TO MATCH DECK FLANGE WIDTH, LENGTH ANDINSULATION THICKNESS (BY OTHERS)
CONVENTIONAL ROOFINGILLUSTRATED
3D-VIEW SHOWING MEF-2A1 MODEL
RE
FER
TO
TE
CH
NIC
AL
BIN
DE
R
4(102 mm)
ARCHITECTURAL ROOF SUPPORTS
ARS-115Rail Post
ARS-400Flag Pole or Rail Roof Support
ARS-122Satellite Dish Roof Support
ARS-450 A/C UnitScreen Roof Support
ARS-133Antenna Roof Support
ARS-510Metal Stair Roof Support
ARS-102Fire Route Walkway
ARS-200 & ARS-210Trellis and BraceRoof Support
ARS-530Stair Platform Roof Support
ARS-540Upright Angle Roof Support
ARS-550Miscellaneous PlateRoof Support
ARS-115Rail Post
ARS-400Flag Pole or Rail Roof Support
ARS-122Satellite Dish Roof Support
ARS-450 A/C UnitScreen Roof Support
ARS-133Antenna Roof Support
ARS-510Metal Stair Roof Support
ARS-102Fire Route Walkway
ARS-200 & ARS-210Trellis and BraceRoof Support
ARS-530Stair Platform Roof Support
ARS-540Upright Angle Roof Support
ARS-550Miscellaneous PlateRoof Support
ARS-520Metal Stair Roof SupportOffset Stringer
5 | ARCHITECTURAL ROOF SUPPORTS
ARCHITECTURAL ROOF SUPPORTS | 6
ARS-590Satellite Dish Roof Support
ARS-680Cross-Over Stair
ARS-685 Tilt-Up AccessLadder & Roof Support
ARS-590Satellite Dish Roof Support
ARS-680Cross-Over Stair
ARS-685 Tilt-Up AccessLadder & Roof Support
ARS-575 TriangularAntenna Roof Support
CONCRETE DECK
STACK JACK FLASHING URETHANEINSULATED, 12" (305 mm) HIGHSLEEVE (ALUMINUM, COPPEROR STAINLESS STEEL)
INVERTED ROOFING ILLUSTRATED
STAINLESS STEEL STUD
CONSULT STRUCTURAL ENGINEER FOR I BEAMSTRENGTH REQUIREMENTS
STEEL PLATE(SEE CHART)
18 GA. (1.2 mm) GALVANIZED CLOSURE PLATE SCREWFASTENED TO STEEL DECK
STEEL DECK
ALL STEEL COMPONENTS EPOXYPRIMED AS STANDARD.FOR GALVANIZED FINISHADD SUFFIX -G TO MODEL NUMBER, I.E. ARS-550-1-G
CONVENTIONAL ROOFINGILLUSTRATED
H