© Eastman Kodak Company, 2005
ConfidentialRestricted Information
{ServiceManual}{Production}{KodakServiceSupport}{ExternalAndInternal}
Publication No. SM7648-111NOV05
SERVICE MANUALfor the
Kodak EasyShare P850 ZOOM DIGITAL CAMERAService Code: 7648
ImportantQualified service personnel must repair this equipment.
2 11NOV05 – SM7648-1
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and makes no warranty, express or implied, with respect to this information. Kodak shall not be liable for any loss or damage, including consequential or special damages, resulting from any use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostaticdischarge. Use caution to prevent damage during all service procedures.
Description Page
Table of Contents
Illustrated Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Necessary Materials. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Configurations for the CAMERA DOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Reference Table for New CAMERAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Reference Table for Adjustment Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Visual Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Equipment Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
BACK and SIDE COVER AYs, and CARD DOOR AY. . . . . . . . . . . . . . . . . . . . 10FRONT COVER, VIEWFINDER, and MONITOR LCD AYs. . . . . . . . . . . . . . . . 12CP1 BOARD - MCU, TOP COVER AY, and TB1 BOARD - SHUTTER AND
MODE DIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14STROBE, BATTERY COMPARTMENT, and LENS AYs. . . . . . . . . . . . . . . . . . 16
Alphabetical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Checkout Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Checking the General Functions of the CAMERA . . . . . . . . . . . . . . . . . . . . . . . 20Checking the ACTUATION, FLASH, and POWER-ON COUNTERS Without the
SERVICE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Checking the “Self-Timer” Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Checking the “Burst” Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Checking the Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Checking the Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Checking the Internal Components of the CAMERA . . . . . . . . . . . . . . . . . . . . . 29Checking the External Components of the CAMERA . . . . . . . . . . . . . . . . . . . . 29
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30LENS - “Electronic Image Stabilization (EIS) Shift Lens Adjustment” . . . . . . . . . . . . 30LENS - “EIS Confirmation and Adjustment” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33LENS - “Lens Adjustment (90 cm)” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36LENS - “Lens Adjustment (Infinity)” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38CCD - “Auto White Balance (AWB)”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40CCD - “White Point Defect Detect”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43CCD - “Black Point and White Point Defect Detect”. . . . . . . . . . . . . . . . . . . . . . . . . . 46PAF SENSOR - “Up and Down”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49PAF SENSOR - “Uniform” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52PAF SENSOR - “Parallax” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55PAF SENSOR - “Distance” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Setting the Defaults for the CAMERA - “Set Default” . . . . . . . . . . . . . . . . . . . . . . . . . 62Setting the ID for the CAMERA - “USB Storage” . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
SM7648-1 – 11NOV05 3
BACK COVER AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66MONITOR LCD AND VIEWFINDER AYs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67FRONT COVER AY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68CP1 BOARD - MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69BATTERY COMPARTMENT AY, TB1 BOARD - SHUTTER AND MODE DIAL, AND
ST1 BOARD - CAPACITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71LENS, STROBE AY, MICROPHONE AY, and ST2, TB2, TB3 BOARDS . . . . . . . . . 73
Additional Service Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Installing the SERVICE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Connecting to the SERVICE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Preparing the Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Using the PATTERN BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Using the CAMERA NEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Upgrading the Firmware Using the MEMORY CARD. . . . . . . . . . . . . . . . . . . . . . . . . 78Upgrading the Firmware Using the Internal Memory . . . . . . . . . . . . . . . . . . . . . . . . . 79
Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80CA1 CIRCUIT - CCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81CP1 BOARD - MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82LENS FPC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83STROBE CIRCUIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Functional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Power Distribution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Subsystem Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87CP1 BOARD - MCU, 1 of 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88CP1 BOARD - MCU, 2 of 6 and ST2 BOARD - STROBE POSITION . . . . . . . . 89CP1 BOARD - MCU, 3 of 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90CP1 BOARD - MCU, 4 of 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91CP1 BOARD - MCU, 5 of 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92CP1 BOARD - MCU, 6 of 6 and ST1 BOARD - CAPACITOR . . . . . . . . . . . . . . 93CA1 BOARD - CCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94ST3 BOARD - HOT SHOE STROBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95TB1 BOARD - SHUTTER AND MODE DIAL and TB4 BOARD - BATTERY SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96TB2 BOARD - FOCUS AND STROBE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . 97TB3 BOARD - AC ADAPTER/USB CONNECTOR. . . . . . . . . . . . . . . . . . . . . . . 98
Component Locator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99All BOARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99CA1 BOARD - CCD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100CP1 BOARD - MCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101ST1 BOARD - CAPACITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103ST2 BOARD - STROBE POSITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103ST3 BOARD - HOT SHOE STROBE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103TB1 BOARD - SHUTTER AND MODE DIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 104TB2 BOARD - FOCUS AND STROBE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . 104TB3 BOARD - AC ADAPTER/USB CONNECTOR. . . . . . . . . . . . . . . . . . . . . . . 105TB4 BOARD - BATTERY SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Publication History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
SERVICE MANUAL
4 11NOV05 – SM7648-1
Section 1: Illustrated Parts List
Necessary Materials
Primary Tools:
Description Part No.
ESD MAT Region Provided
TWEEZERS Region Provided
SOLDER REMOVAL TOOL Region Provided
FLASH CAPACITOR DISCHARGE TOOL - resistor minimum, 1.2 kW TL-5336
DIGITAL VOLTMETER TL-4114
LIGHT BOX - Arrowin LBF, 2001 -------
DC POWER SUPPLY - 0 - 12 V, 5.0 A with clip leads, ez or alligator Region Provided
TRIPOD - Bogen, Model 3021s TL-5176
TRIPOD HEAD - Bogen, Model 3047 TL-5206
OPTRONICS PHOTOMETER/DETECTOR - Graseby -------
COLOR TEMPERATURE METER - Gossen Color Pro 3F, or equivalent -------
AIR HOSE - optional Region Provided
Computer:• Microsoft Windows XP OPERATING SYSTEM
• IBM computer or IBM compatible with a Pentium PROCESSOR, 233 MHz or higher
• 256 MB RAM minimum recommended
• 200 MB hard disk space
• CD-ROM DRIVE
• USB PORT
• 21-in. color MONITOR
• 24-bit XGA VIDEO CARD
• Color VIDEO MONITOR
Region Provided
FEEDBACK SOFTWARE Region Provided
Kodak LENS CLEANING PAPER Region Provided
Kodak LENS CLEANER 1C8000
COVER CLEANER - Johnson SHINE-UP FURNITURE WAX TL-5182
LAMP - Arrowin LBF, 2001 light box, EVC/FGX, Phillips, 6958 Region Provided
FLASH METER TL-5205
STATION - Weller, soldering, 50 W TL-5412
TIP - soldering iron, standard ST1 TL-5413
TIP - soldering iron, single flat ST5 TL-5414
TIP - soldering iron, conical ST7 TL-5415
SCREWDRIVER - Milwaukee, cordless, with battery and charger, optional TL-5424
HEX ADAPTER - 0.40 mm (0.02 in.) bit, optional TL-5421
BATTERY for a POWER SCREWDRIVER - 2.4 V, optional TL-5422
BIT - power, 00 x 80 mm (3.14 in.), 4 mm (0.15 in.) drive, optional TL-5423
TWEEZERS - special TL-5338
Illustrated Parts List
SM7648-1 – 11NOV05 5
Special Tools
* This item is provided by the region. If using Microsoft Windows XP and Kodak EasyShare SOFTWARE, Version 5.0, load only the DRIVERS for the CAMERA.
** These files are on the Kodak Partner Web site at https://partner.kodak.com/.
*** See “Configurations for the CAMERA DOCK” on Page 6.
PAINT - 18% gray, interior, flat Region ProvidedVendor:RC Shaheen1400 St. Paul Blvd.Rochester, NY 14621Telephone: 585-266-1500MUR1597
TARGET - 18% gray TL-5845
SCREWDRIVER - Phillips, No. 00 x 40 mm (1.57 in.) TL-5429
SCREWDRIVER - Phillips, No. 000 x 40 mm (1.57 in.) TL-5430
SCREWDRIVER - Phillips, No. 2 x 40 mm (1.57 in.) TL-5431
SCREWDRIVER - Phillips, No. 0 x 50 mm (1.97 in.) TL-5432
GEN 2 CAMERA POST - optional TL-5416
GEN 2 CUSTOM TEXT FIXTURE - optional 5E8164
GEN 2 CAMERA POST FABRICATION DRAWING - optional 5E8161
GEN 2 CUSTOM TEST FIXTURE FABRICATION DRAWING - optional 5E8163
Description Part No.
PATTERN BOX - color viewer VJ8-0190
COLLIMATOR Region Provided
TARGET - Siemens, star TL-5884
TARGET - shift lens adjustment TL-5888
TARGET - up and down adjustment TL-5885
TARGET - parallax adjustment TL-5886
TARGET - distance adjustment TL-5887
CAMERA NEST TL-5866
Kodak Li-Ion RECHARGEABLE DIGITAL CAMERA BATTERY KLIC-5001- 1700 mA-hour
106 4062
Kodak EasyShare CAMERA DOCK SERIES 3 includes the 5 V AC ADAPTER 188 6597
Kodak DOCK ADAPTER KIT D-22*** 175 6824
USB CABLE, Model U-8, 8-pin, for Kodak EasyShare DIGITAL CAMERAS 195 5137
A/V CABLE, Model AV-8, 8-pin, for Kodak EasyShare DIGITAL CAMERAS 811 8390
SERVICE SOFTWARE - “DsCalDi.exe”, “camapi32.dll”, and “PTPApi32.dll” **
Firmware file - “KP850100.FW” **
Kodak EasyShare SOFTWARE - Version 4.0 or higher *
Description Part No.
SERVICE MANUAL
6 11NOV05 – SM7648-1
Configurations for the CAMERA DOCK
Note• You must use the Kodak DOCK ADAPTER KIT D-22 when connecting the Kodak EasyShare P850 ZOOM
DIGITAL CAMERA to the Kodak EasyShare CAMERA DOCK 6000.
• The Kodak EasyShare P850 ZOOM DIGITAL CAMERA is compatible with:
– Kodak EasyShare CAMERA DOCK SERIES 3
– other 26-PIN DOCKS
CUSTOMDOCKINSERT
CAMERADOCK6000
CUSTOMDOCKINSERT
DOCKSERIES 3DOCK ADAPTER
KIT D-22
P252_0075BAFigure 1 Figure 2
CAMERA
Illustrated Parts List
SM7648-1 – 11NOV05 7
Reference Table for New CAMERAS
ImportantYou must use the following catalog numbers to order a replacement CAMERA if the CAMERA is under warranty and cannot be repaired, or to order a MASTER CAMERA.
Region Language Catalog No.Americas and Canada - SENSORMATIC and CHECKPOINT TAGS
• English
• French
• Spanish
172 0614
Americas and Canada - Non-OFM, SENSORMATIC and CHECKPOINT TAGS
• English
• French
• Spanish
165 9432
Brazil • Italian
• Spanish
• Portuguese
894 3060
Europe, Africa, and the Middle East • English
• French
• German
889 3901
Europe, Africa, and the Middle East • Italian
• Spanish
• Portuguese
392 8835
Europe, Africa, and the Middle East Nordic 392 8843Europe, Africa, and the Middle East Emerging 392 8850Greater China and Taiwan • English
• Chinese
– simplified
– traditional
• Korean
867 3428
People’s Republic of China • English
• Chinese
– simplified
– traditional
• Korean
145 2200
Asia Pacific and Korea • English
• Korean
• Chinese
– simplified
– traditional
824 5219
Japan Japanese 870 6467Kodak Service & Support - bulk, class A English SP854 4561Kodak Service & Support - retail, class A English SP172 0614Kodak Service & Support - bulk, class B English SP168 9801Kodak Service & Support - retail, class B English SP881 8296
SERVICE MANUAL
8 11NOV05 – SM7648-1
Reference Table for Adjustment Procedures
After installing: Do:
• CP1 BOARD - MCU
• MONITOR LCD AY
• LENS AY
1. LENS - “Electronic Image Stabilization (EIS) Shift Lens Adjustment” on Page 30
2. LENS - “EIS Confirmation and Adjustment” on Page 33
3. LENS - “Lens Adjustment (90 cm)” on Page 36
4. LENS - “Lens Adjustment (Infinity)” on Page 38
5. CCD - “Auto White Balance (AWB)” on Page 40
6. CCD - “White Point Defect Detect” on Page 43
7. CCD - “Black Point and White Point Defect Detect” on Page 46
8. PAF SENSOR - “Up and Down” on Page 49
9. PAF SENSOR - “Uniform” on Page 52
10. PAF SENSOR - “Parallax” on Page 55
11. PAF SENSOR - “Distance” on Page 58
12. Setting the Defaults for the CAMERA - “Set Default” on Page 62
13. Setting the ID for the CAMERA - “USB Storage” on Page 64
Illustrated Parts List
SM7648-1 – 11NOV05 9
Visual Index
Item Description
1 “BACK and SIDE COVER AYs, and CARD DOOR AY” on Page 10
2 “FRONT COVER, VIEWFINDER, and MONITOR LCD AYs” on Page 12
3 “CP1 BOARD - MCU, TOP COVER AY, and TB1 BOARD - SHUTTER AND MODE DIAL” on Page 14
4 “STROBE, BATTERY COMPARTMENT, and LENS AYs” on Page 16
P264_1011DC_
1
2
3
4
4
A
B
C
A
B
C
D
D
SERVICE MANUAL
10 11NOV05 – SM7648-1
Equipment Parts
Caution• Dangerous Voltage
• You must do a discharge of the STROBE CAPACITOR 1 after removing the BACK COVER AY.
Figure 1 BACK and SIDE COVER AYs, and CARD DOOR AY
P264_1000DCP264_1000DCA
6
10
1
614 13 12
11
9
6
8
7
6
54
3
2
1
11
2
3
4 5
6
78
9
10
11
121314
6
6
1
1
Illustrated Parts List
SM7648-1 – 11NOV05 11
Figure 1 BACK and SIDE COVER AYs, and CARD DOOR AY
Item Part No. Description Quantity Notes1 3F9180 SCREW - STPG, 1.7 x 4.0 1 62 3F9127 SHAFT - card door 1 13 3F9126 SPRING - card door 1 14 3F9125 DOOR - card 1 15 3F9133 COVER - hot shoe 1 16 3F9172 SCREW - PCS, 1.7 x 3.0 1 57 3F9134 COVER - viewfinder ay 1 18 3F9176 SCREW - STPG, 1.7 x 3.0 1 19 3F9124 BACK COVER AY 1 110 3F9108 COVER - side 1 111 3F9174 SCREW - PCS, 1.7 x 3.5 1 212 3F9109 PLATE 1 113 3F9173 SCREW - PCS, 1.7 x 4.0 1 214 3F9111 HOLDER - side cover 1 1
- - - - 3F9187 CUSTOM INSERT - dock 1 1 Not visible in the graphic.- - - - 3F9188 CAP - lens 1 1 Not visible in the graphic.- - - - 3F9189 STRAP - lens cap 1 1 Not visible in the graphic.- - - - 3F6447 STRAP - shoulder, black 1 1 Not visible in the graphic.
SERVICE MANUAL
12 11NOV05 – SM7648-1
Caution• Dangerous Voltage
• You must do a discharge of the STROBE CAPACITOR 2 after removing the MONITOR LCD AY.
Figure 2 FRONT COVER, VIEWFINDER, and MONITOR LCD AYs
P264_1001DCP264_1001DCA
10
9
8
7
6
5
43
2
11
2
34
5
6
7
8
9
10
Illustrated Parts List
SM7648-1 – 11NOV05 13
Figure 2 FRONT COVER, VIEWFINDER, and MONITOR LCD AYs
Item Part No. Description Quantity Notes1 3F9177 SCREW - STPG, 1.7 x 3.0 2 22 3F9176 SCREW - STPG, 1.7 x 3.5 2 33 3F9123 VIEWFINDER AY 2 14 3F9175 SCREW - PCS, 1.7 x 2.5 2 25 3F6121 SCREW - PCS, 1.7 x 2.5 2 36 3F9120 MONITOR LCD AY 2 17 3F9107 TRIPOD MOUNT 2 18 3F9172 SCREW - PCS, 1.7 x 3.0 2 19 3F9173 SCREW - PCS, 1.7 x 4.0 2 310 3F9106 FRONT COVER AY 2 1
SERVICE MANUAL
14 11NOV05 – SM7648-1
Caution• Dangerous Voltage
• You must do a discharge of both of the STROBE CAPACITORS after removing the TOP COVER AY and TB1 BOARD.
Figure 3 CP1 BOARD - MCU, TOP COVER AY, and TB1 BOARD - SHUTTER AND MODE DIAL
P264_1002DCP264_1002DCA
8
9
8
7
6
5
4
32
1
1
1
2 3
4
5
6
7
8
91
8
Illustrated Parts List
SM7648-1 – 11NOV05 15
Figure 3 CP1 BOARD - MCU, TOP COVER AY, and TB1 BOARD - SHUTTER AND MODE DIAL
Item Part No. Description Quantity Notes1 3F9178 SCREW - STPG, 1.7 x 3.5 3 22 3F9117 BOARD - TB1, shutter and mode dial 3 13 3F9181 SCREW - STPG, 1.7 x 4.5 3 14 3F9119 COVER - top 3 15 3F9166 FLEXIBLE CIRCUIT - CP1 to TB1 3 16 3F9184 SCREW - STPG, 1.7 x 4.5 3 27 3F9170 BUTTON - 5-way, joystick 3 18 3F6121 SCREW - PCS, 1.7 x 2.5 3 39 3F9168 BOARD - CP1, MCU 3 1
- - - - 3F9185 FUSE 5.0 A, 32 V 3 2 See:• “CP1 BOARD - MCU, 1 of 2” on
Page 101
• “CP1 BOARD - MCU, 2 of 2” on Page 102
- - - - 3F6051 FUSE 2.0 A, 32 V 3 3 See “CP1 BOARD - MCU, 2 of 2” on Page 102.
SERVICE MANUAL
16 11NOV05 – SM7648-1
Figure 4 STROBE, BATTERY COMPARTMENT, and LENS AYs
P264_1003DC
1
2
3
2
5 6
7
4
8
9
11
12
13
14
10
10
17 16
15
10
18
1920
21
22
23
24825
226
27
28
21
P264_1003DCA
1
2
3
4
5 6
7
8
9
10 11
12
13
14
15
1617
18
1920
21
22
23
2425
26
27
28
2
2
8
10
21
Illustrated Parts List
SM7648-1 – 11NOV05 17
Figure 4 STROBE, BATTERY COMPARTMENT, and LENS AYs
Item Part No. Description Quantity Notes1 3F9148 STROBE AY 4 1 Includes:
• 2 SCREWS
• STROBE COVER
• STROBE2 3F9177 SCREW - STPG, 1.7 x 3.0 4 43 3F9149 COVER - strobe 4 14 3F9115 BOARD - TB4, battery sensor 4 15 3F9165 BATTERY COMPARTMENT AY 4 16 3F9178 SCREW - TPG, 1.7 x 3.5 4 17 3F9163 BOARD - ST1, capacitor 4 18 3F6121 SCREW - PCS, 1.7 x 2.5 4 19 3F9146 BOARD - TB2, focus and strobe mode 4 110 3F9174 SCREW - PCS, 1.7 x 3.5 4 211 3F9158 BOARD - CA1, CCD 4 112 3F9183 SCREW - STPG, 1.7 x 4.0 4 213 3F9160 FLEXIBLE CIRCUIT - CP1 to CA1 4 114 3F9162 SPACER - CA1, flexible 4 115 3F9157 SPACER 4 116 3F9156 FILTER - optical 4 117 3F9155 SPACER - LPF 4 118 3F9154 LENS AY 4 119 3F9153 RING - adhesive 4 120 3F9152 LENS - DEC 4 121 3F9175 SCREW - PCS, 1.7 x 2.5 4 322 3F9176 SCREW - TPG, 1.7 x 3.5 4 123 3F9139 FLEXIBLE CIRCUIT - CP1 to TB3 4 124 3F9138 BOARD - TB3, AC adapter/USB connector 4 125 3F9142 SPEAKER AY 4 126 3F9182 SCREW - STPG, 1.4 x 3.0 4 127 3F9145 BOARD - ST2, strobe position 4 128 3F9151 PAF SENSOR - parallax auto focus 4 1
SERVICE MANUAL
18 11NOV05 – SM7648-1
Section 2: Alphabetical Index
Alphabetical Index
Part No. Description Figure No.3F9124 BACK COVER AY 13F9165 BATTERY COMPARTMENT AY 43F9158 BOARD - CA1, CCD 43F9168 BOARD - CP1, MCU 33F9163 BOARD - ST1, capacitor 43F9145 BOARD - ST2, strobe position 43F9117 BOARD - TB1, shutter and mode dial 33F9146 BOARD - TB2, focus and strobe mode 43F9138 BOARD - TB3, AC adapter/USB connector 43F9115 BOARD - TB4, battery sensor 43F9170 BUTTON - 5-way, joystick 33F9188 CAP - lens 13F9133 COVER - hot shoe 13F9108 COVER - side 13F9149 COVER - strobe 43F9119 COVER - top 33F9134 COVER - viewfinder ay 13F9187 CUSTOM INSERT - dock 13F9125 DOOR - card 13F9156 FILTER - optical 43F9160 FLEXIBLE CIRCUIT - CP1 to CA1 43F9166 FLEXIBLE CIRCUIT - CP1 to TB1 33F9139 FLEXIBLE CIRCUIT - CP1 to TB3 43F9106 FRONT COVER AY 23F6051 FUSE 2.0 A, 32 V 33F9185 FUSE 5.0 A, 32 V 33F9111 HOLDER - side cover 13F9152 LENS - DEC 43F9154 LENS AY 43F9120 MONITOR LCD AY 23F9151 PAF SENSOR - parallax auto focus 43F9109 PLATE 13F9153 RING - adhesive 43F6121 SCREW - PCS, 1.7 x 2.5 2, 3, 43F9175 SCREW - PCS, 1.7 x 2.5 2, 43F9172 SCREW - PCS, 1.7 x 3.0 1, 23F9174 SCREW - PCS, 1.7 x 3.5 1, 43F9173 SCREW - PCS, 1.7 x 4.0 1, 23F9182 SCREW - STPG, 1.4 x 3.0 43F9176 SCREW - STPG, 1.7 x 3.0 13F9177 SCREW - STPG, 1.7 x 3.0 2, 43F9176 SCREW - STPG, 1.7 x 3.5 23F9178 SCREW - STPG, 1.7 x 3.5 33F9180 SCREW - STPG, 1.7 x 4.0 13F9183 SCREW - STPG, 1.7 x 4.0 43F9181 SCREW - STPG, 1.7 x 4.5 3
Alphabetical Index
SM7648-1 – 11NOV05 19
3F9184 SCREW - STPG, 1.7 x 4.5 33F9176 SCREW - TPG, 1.7 x 3.5 43F9178 SCREW - TPG, 1.7 x 3.5 43F9127 SHAFT - card door 13F9157 SPACER 43F9162 SPACER - CA1, flexible 43F9155 SPACER - LPF 43F9142 SPEAKER AY 43F9126 SPRING - card door 13F9189 STRAP - lens cap 13F6447 STRAP - shoulder, black 13F9148 STROBE AY 43F9107 TRIPOD MOUNT 23F9123 VIEWFINDER AY 2
Alphabetical Index
Part No. Description Figure No.
SERVICE MANUAL
20 11NOV05 – SM7648-1
Section 3: Diagnostics
Checkout Procedures
Checking the General Functions of the CAMERA
ImportantYou must do these procedures before returning the CAMERA to the customer.
[1] Check:
• MODE/POWER SWITCH is in the “OFF” position
• MODE DIAL is in the “AUTO” position
[2] Install:
• RECHARGEABLE BATTERY in the CAMERA
• 5 V AC ADAPTER to:
– CAMERA DOCK
– source of power
• CAMERA in the CAMERA DOCK. See “Configurations for the CAMERA DOCK” on Page 6.
[3] Check that one or more of the 3 LEDs for the BATTERY on the CAMERA DOCK illuminate green.
[4] Energize the CAMERA.
[5] Check that the CAMERA energizes.
[6] De-energize the CAMERA.
[7] Remove:
• CAMERA from the CAMERA DOCK
• BATTERY from the CAMERA
[8] Connect the 5 V AC ADAPTER to the “DC IN 5V” port on the CAMERA.
[9] Energize the CAMERA.
[10] Check that the CAMERA energizes.
[11] De-energize the CAMERA.
[12] Remove the 5 V AC ADAPTER from the CAMERA.
[13] Install a RECHARGEABLE BATTERY in the CAMERA.
[14] Energize the CAMERA.
[15] Check that the CAMERA energizes.
[16] De-energize the CAMERA.
[17] Insert the MEMORY CARD into the CAMERA.
[18] Connect the 5 V AC ADAPTER to the CAMERA DOCK.
[19] Install the CAMERA on the CAMERA DOCK. See “Configurations for the CAMERA DOCK” on Page 6.
[20] Energize the CAMERA.
[21] Check the energize sequence:
• POWER LED illuminates green
• MONITOR LCD:
– displays “Kodak EasyShare System” for 2 seconds
– displays the “AUTO” mode for 4 seconds
– does not display error codes
• LENS moves to the default “Wide” position
Diagnostics
SM7648-1 – 11NOV05 21
[22] De-energize the CAMERA.
[23] Check the de-energize sequence:
• MONITOR LCD displays black
• LENS moves in
• POWER LED de-energizes
[24] Remove the CAMERA from the CAMERA DOCK.
[25] Install a new BATTERY that has a full charge.
[26] Energize the CAMERA.
[27] Check the energize sequence. See Step 21.
[28] Press:
• “EVF/LCD” BUTTON to check that the view moves from the MONITOR LCD and the VIEWFINDER AY
• “EVF/LCD” BUTTON again to illuminate the MONITOR LCD
ImportantThe default position is “Wide”.
[29] Move the ZOOM LEVER to check that the LENS moves from “Wide” to “Tele” position.
[30] Check:
• ZOOM indicates on the MONITOR LCD
• MONITOR LCD is in focus when the LENS stops moving from “Wide” to “Tele” position
[31] Press the SHUTTER BUTTON to capture an image.
[32] Check that the MONITOR LCD displays:
• image
• number of additional images that can be captured
• icons:
– “Flash” mode
– quality of the image
– type of memory
[33] Press the “EVF/LCD” BUTTON to move the view to the VIEWFINDER AY.
[34] Check that the view is in focus.
[35] Move the ZOOM LEVER to check that the LENS moves from “Tele” to “Wide” position.
[36] Check:
• ZOOM indicates on the VIEWFINDER AY
• VIEWFINDER AY is in focus when the LENS stops moving from “Tele” to “Wide” position
[37] Press the SHUTTER BUTTON to capture an image.
[38] Check that the VIEWFINDER AY displays:
• image
• number of additional images that can be captured
• icons:
– “Flash” mode
– quality of the image
– type of memory
[39] Press the “EVF/LCD” BUTTON to move the view to the MONITOR LCD.
SERVICE MANUAL
22 11NOV05 – SM7648-1
[40] Check the following BUTTONS and SWITCHES:
BUTTON/SWITCH Do:
• “MENU”
• JOYSTICK
• OK
1. Press the “MENU” BUTTON.
2. Check that the MONITOR LCD displays options.
3. Press:
• JOYSTICK up or down to move through the menu
• JOYSTICK right to display additional options
• JOYSTICK in for the OK BUTTON to select an option
• “MENU” BUTTON to quit
• “REVIEW”
• “SHARE”
1. Press the “REVIEW” BUTTON.
2. Check that the MONITOR LCD illuminates.
3. Press:
• JOYSTICK left and right to display images
• JOYSTICK down to display a menu of the images
• JOYSTICK left and right to select an image
• OK BUTTON in to display the image
• “SHARE” BUTTON
4. Check that options display.
5. Press:
• JOYSTICK left and right to display other images
• “REVIEW” BUTTON
• “REVIEW” BUTTON again to quit
INFO 1. In “Liveview” mode, press the INFO BUTTON.
2. Check that only the “Battery” icon and the FRAMING MARKS display on the MONITOR LCD.
3. Press the INFO BUTTON again.
4. Check that only the FRAMING MARKS display.
5. Press the INFO BUTTON again.
6. Check that the icons display.
7. Press:
• “REVIEW” BUTTON to display an image
• INFO BUTTON
8. Check that the MONITOR LCD displays data about the image.
9. Press the INFO BUTTON 3 times.
10. Check that the MONITOR LCD does not display the icons.
“DELETE” 1. Press the “DELETE” BUTTON.
2. Use the JOYSTICK to select “PICTURE”.
3. Press:
• OK BUTTON to delete the image
• “REVIEW” BUTTON
4. Check that the image is deleted.
5. Press the “REVIEW” BUTTON to quit.
Diagnostics
SM7648-1 – 11NOV05 23
ZOOM LEVER, “T” 1. Move the ZOOM LEVER to the “T” for “Tele”.
2. Check:
• MONITOR LCD is in focus from the “Wide” to “Tele” positions
• LENS moves from the “Wide” to “Tele” positions
ZOOM LEVER, “W” 1. Move the ZOOM LEVER to the “W” BUTTON.
2. Check:
• MONITOR LCD is in focus from the “Tele” to “Wide” positions
• LENS moves from the “Tele” to “Wide” positions
• FLASH
• “SET”
• COMMAND DIAL
1. Move the MODE DIAL to “P”.
2. Press the FLASH BUTTON to check that the menu displays:
• “Auto”
• “Fill”
• “Redeye”
• “Slow front sync”
• “Off”
3. Select the “Off” position.
4. Check that the “Exposure Compensation” icon displays on the MONITOR LCD.
5. Move the COMMAND DIAL left and right to select the “Exposure Compensation” icon.
6. Press the “SET” BUTTON.
7. Check that the icon changes color.
8. Move the COMMAND DIAL to change the setting of the icon.
9. Press the “SET” BUTTON.
10. In low light, press the SHUTTER BUTTON to the “S1” position.
11. Check that the “AE” and “AF” icons display on the MONITOR LCD.
12. Move the MODE DIAL to “AUTO”.
13. Press the FLASH BUTTON.
14. Select the “Auto” option.
SHUTTER 1. Press the SHUTTER BUTTON to capture an image.
2. Check:
• STROBE AY opens and the STROBE flashes
• an image displays on the MONITOR LCD
BUTTON/SWITCH Do:
SERVICE MANUAL
24 11NOV05 – SM7648-1
[41] Check each of the options on the MODE DIAL.
“FOCUS” 1. Press:
• “FOCUS” BUTTON
• JOYSTICK down to set the mode to “Macro AF”
• OK BUTTON
2. Check that the “Flower” icon displays on the MONITOR LCD.
3. Press:
• “FOCUS” BUTTON
• JOYSTICK down to set the mode to “Landscape”
• OK BUTTON
4. Check that the “Mountain” icon displays on the MONITOR LCD.
5. Press:
• “FOCUS” BUTTON
• JOYSTICK up to set the mode to “Manual”
• OK BUTTON
6. Check that the “0 - ∞” icon displays.
7. Move the JOYSTICK left and right to see the focus window.
8. Press:
• “FOCUS” BUTTON
• JOYSTICK down to set the mode to “Normal AF”
• OK BUTTON
9. The options should not be displayed and the focus is returned to automatic.
“EVF/LCD” 1. Press the “EVF/LCD” BUTTON.
2. Check that the view is through the VIEWFINDER AY.
3. Press the “EVF/LCD” BUTTON again.
4. Check that the view is displayed on the MONITOR LCD.
MODE DIAL The MODE DIAL has 10 options.
Selected MODE DIAL Option Do:
“AUTO” 1. Move the MODE DIAL to “AUTO”.
2. Check that “Auto:” displays on the MONITOR LCD.
3. Press the SHUTTER BUTTON to the “S1” position.
4. Check that the following information displays on the MONITOR LCD:
• aperture setting
• SHUTTER speed
“P”, “A”, “S”, “M”, “C1”, “C2”, “C3”
1. Move the MODE DIAL to each option.
2. Check that the corresponding option name displays on the MONITOR LCD.
3. Use the COMMAND DIAL to select the icons of the settings.
4. Select an icon and press the “SET” BUTTON.
5. Check:
• icon changes color
• COMMAND DIAL changes the setting
BUTTON/SWITCH Do:
Diagnostics
SM7648-1 – 11NOV05 25
“Video” 1. Move the MODE DIAL to the “Video” icon.
2. Check:
• “Video:” displays on the MONITOR LCD
• FRAMING MARKS are disabled
3. Press and release the SHUTTER BUTTON.
4. During the video file recording, check:
• “REC” on the MONITOR LCD flashes
• recording time displays on the MONITOR LCD
5. Speak some words.
6. Press and release the SHUTTER BUTTON.
7. Check that the MONITOR LCD displays an icon for playing back.
8. Press the OK BUTTON.
9. Check that the video file begins to play back.
10. Press the JOYSTICK to the right.
11. Check that the video file plays back at a faster speed.
12. Press the OK BUTTON.
13. Check that the video stops.
14. Press the “MENU” BUTTON.
15. Check that the MONITOR LCD displays a list of options.
16. Press:
• “MENU” BUTTON to quit
• OK BUTTON
17. Check:
• video file continues
• audio plays back
18. Press the “REVIEW” BUTTON to quit.
“SCN” 1. Press the “SCN” BUTTON to display the 16 “scene” icons at the bottom of the MONITOR LCD.
2. Check that the selected “scene” is identified with:
• name of the “scene”
• one of the 16 icons has blue edges indicating the selected icon
• additional icon in the lower right corner of the MONITOR LCD
3. Move the JOYSTICK:
• left
• right
4. Check that the selected icon changes.
5. Press the OK BUTTON.
Selected MODE DIAL Option Do:
SERVICE MANUAL
26 11NOV05 – SM7648-1
[42] Check one of the icons in the “SCN” position. For example,
[43] To check the operation of the FAVORITES SWITCH, move the MODE/POWER SWITCH to the “Favorites” position.
Selected “SCN” Icon: Do:
Backlight 1. Check:
• “Backlight:” displays on the MONITOR LCD
• FLASH is in “Fill” mode
2. Press the SHUTTER BUTTON.
3. Check that the CAMERA flashes once, then flashes again.
BUTTON/SWITCH Do:
“Entering Favorites...” 1. Check that “Entering Favorites...” displays on the MONITOR LCD.
2. Any images labeled with the “Favorites” icon display automatically.
3. Press:
• “REVIEW” BUTTON to view images
• “SHARE” BUTTON
4. Check that the MONITOR LCD displays a list of options.
5. Press the “REVIEW BUTTON” to quit.
“DRIVE” 1. Move the MODE DIAL to “AUTO”.
2. Press the “DRIVE” BUTTON.
3. Check that a list of options display for:
• “Single”
• “Self timer”
• “burst” modes
• “Exposure bracketing” modes
• “Time Lapse”
4. Press the “DRIVE” BUTTON again to quit.
“PROG.” 1. Move the MODE DIAL to “P”.
2. Press the “PROG.” BUTTON.
3. Check that a list of options display for the flash.
4. Press the “PROG.” BUTTON again to quit.
EXPOSURE METERING
1. Move the MODE DIAL to any of the “P”, “A”, “S”, “M”, “C1”, “C2”, “C3” positions.
2. Press the EXPOSURE METERING BUTTON.
3. Check that a list of options display for the exposure and light.
4. Press the EXPOSURE METERING BUTTON again to quit.
Diagnostics
SM7648-1 – 11NOV05 27
Checking the ACTUATION, FLASH, and POWER-ON COUNTERS Without the SERVICE SOFTWARE
[1] Energize the CAMERA.
[2] Press:
• “MENU” BUTTON
• JOYSTICK to the right
• JOYSTICK up to be on the “ABOUT...” option
[3] At the same time, press:
• “DELETE” BUTTON
• OK BUTTON
[4] Read what displays on the MONITOR LCD:
[5] Press:
• OK BUTTON
• “MENU” BUTTON to quit
“AE/AF”
Important“Automatic Exposure” is the default mode.
1. Press:
• “MENU” BUTTON
• JOYSTICK once to the right to display a menu for settings
2. Move the JOYSTICK to “AE/AF button set”.
3. Press:
• OK BUTTON once to display the options
• OK BUTTON again to select the “AE lock” option
• “MENU” BUTTON
• “AE/AF” BUTTON to lock the exposure setting
4. Check that “AEL” displays on the MONITOR LCD.
5. Press the “AE/AF” BUTTON again to allow adjustment of the exposure setting.
Display Description
“Firmware version” 1.0000 or greater
“PC” Power-on Count
“TC” Total Captured
“SC” Strobe Count
“SN” Serial Number
BUTTON/SWITCH Do:
SERVICE MANUAL
28 11NOV05 – SM7648-1
Checking the “Self-Timer” Function[1] Press the “DRIVE” BUTTON.
[2] Check that the MONITOR LCD illuminates.
[3] Use the JOYSTICK and the OK BUTTON to select “Self timer 10 sec.”.
[4] Press the SHUTTER BUTTON to the “S2” position.
[5] Check that an image is captured in 10 seconds.
[6] Press the “DRIVE” BUTTON.
[7] Use the JOYSTICK and the OK BUTTON to select “Single”.
[8] Press the “DRIVE” BUTTON again to quit.
Checking the “Burst” Function[1] Press the “DRIVE” BUTTON.
[2] Check that the MONITOR LCD illuminates.
[3] Use the JOYSTICK and the OK BUTTON to select “First Burst”.
[4] Press and hold the SHUTTER BUTTON to the “S2” position for 3 seconds.
[5] Release the SHUTTER BUTTON.
[6] Press:
• “REVIEW” BUTTON to check that up to 5 images are captured
• “REVIEW” BUTTON again to quit
• “DRIVE” BUTTON
[7] Use the JOYSTICK and the OK BUTTON to select “Single”.
Checking the Communication[1] Connect the CAMERA DOCK to the computer with the USB CABLE.
[2] Download the images and the video file with the USER SOFTWARE.
[3] Check the quality of the images.
[4] Do “Connecting to the SERVICE SOFTWARE” on Page 75. If successful, the USB interface on the DOCK CONNECTOR is operating correctly.
[5] Remove the CAMERA from the CAMERA DOCK.
[6] Disconnect the USB CABLE from the CAMERA DOCK.
[7] Connect the USB CABLE to the CAMERA.
[8] Download the 2 images with the USER SOFTWARE. If successful, the USB CONNECTOR on the TB3 BOARD is operating correctly.
Checking the Accessories
VIDEO CABLE
[1] Disconnect the USB CABLE from the CAMERA.
[2] Connect the VIDEO MONITOR to the CAMERA with the VIDEO CABLE.
[3] If you are not using the internal memory, insert a MEMORY CARD with image files into the CAMERA.
[4] Energize the CAMERA.
[5] Press the “REVIEW” BUTTON.
[6] Check that the MONITOR LCD de-energizes and the image displays on the VIDEO MONITOR.
[7] De-energize the CAMERA.
[8] Remove the MEMORY CARD.
Diagnostics
SM7648-1 – 11NOV05 29
[9] Energize the CAMERA.
[10] Check that the green LED next to the VIEWFINDER blinks.
Kodak P20 ZOOM FLASH
ImportantIf the customer sends a P20 ZOOM FLASH with the CAMERA, you must do this procedure.
[1] Install the P20 ZOOM FLASH onto the HOT SHOE on the CAMERA.
[2] Energize:
• P20 ZOOM FLASH
• CAMERA
[3] Set the mode to “AUTO”.
[4] Wait until the READY LIGHT on the P20 ZOOM FLASH remains illuminated.
[5] Press the SHUTTER BUTTON to the “S2” position.
[6] Check that the FLASH operates.
[7] Use:
• MANUAL ZOOM RING
• ZOOM LENS
[8] Set the zoom to 140 mm.
[9] Do Step 4 - Step 6 again.
Checking the Internal Components of the CAMERA
ImportantFor operations of the “Warranty Channel Returns” department, do not do LENS - “Lens Adjustment (90 cm)” on Page 36.
[1] Connect the CAMERA DOCK to the computer with the USB CABLE.
[2] Install:
• MEMORY CARD in the CAMERA
• CAMERA on the CAMERA DOCK
[3] Do:
• Checking the ACTUATION, FLASH, and POWER-ON COUNTERS Without the SERVICE SOFTWARE on Page 27
• Setting the Defaults for the CAMERA - “Set Default” on Page 62
• Setting the ID for the CAMERA - “USB Storage” on Page 64
Checking the External Components of the CAMERA[1] Check the COVERS of the CAMERA for scratches.
[2] If necessary, install new COVERS.
[3] Clean:
• COVERS
• SCREEN on the MONITOR LCD
• VIEWFINDER WINDOW
• FLASH COVER
[4] Check and clean the LENS.
SERVICE MANUAL
30 11NOV05 – SM7648-1
Section 4: Adjustments
LENS - “Electronic Image Stabilization (EIS) Shift Lens Adjustment”
Adjustment Specification
Prerequisites:None
To Check:[1] Do Step 1 - Step 5 of the procedure “To Adjust:” on Page 30.
To Adjust:[1] Set the CAMERA 114 +/- 1 cm (44.9 +/- 0.4 in.) from the TARGET by using:
• SLOT 6
• red holes
• CAMERA NEST in the red hole for the TRIPOD
[2] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[3] Click “Test” to display the menu.
Purpose: To set the value for the position of the image on the LCD to the position of the LENS.
Do When: After installing a new:• CP1 BOARD - MCU
• MONITOR LCD AY
• LENS AY
Specification: None
Special Tools: • SERVICE SOFTWARE
• Computer
• 5 V AC ADAPTER
• USB CABLE
• TARGET - shift lens adjustment
Adjustments
SM7648-1 – 11NOV05 31
[4] Select “Monitor”.
Note• This is an example of the TARGET.
• The actual TARGET does not have the lines or DOTS.
[5] Check that the MONITOR LCD displays the TARGET.
[6] Adjust the position of the CAMERA to align the center of the MONITOR LCD a small distance up and to the left of the center of the symbol on the TARGET.
SHIFT LENS ADJUSTMENT TARGET
the center of the screen
the center of the cross symbol
P264_9002AA
SERVICE MANUAL
32 11NOV05 – SM7648-1
[7] Click “Test” to display the menu.
[8] Select “EIS Adj”.
[9] After the test, check:
• result and adjustment value display
• does not display “NG”
[10] Click [OK].
Postrequisites:None
Adjustments
SM7648-1 – 11NOV05 33
LENS - “EIS Confirmation and Adjustment”
Adjustment Specification
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Set the CAMERA 114 +/- 1 cm (44.9 +/- 0.4 in.) from the TARGET by using.
• SLOT 6
• red holes
• CAMERA NEST in the red hole for the TRIPOD
[2] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[3] In the “Cal Data” field, type: 2
Purpose: To provide calibration information for the CP1 BOARD - MCU to adjust the position of the LENS.
Do When: After installing a new:• CP1 BOARD - MCU
• MONITOR LCD AY
• LENS AY
Specification: “FOCUS OK” displays.
Special Tools: • SERVICE SOFTWARE
• Computer
• 5 V AC ADAPTER
• USB CABLE
• TARGET - shift lens adjustment
SERVICE MANUAL
34 11NOV05 – SM7648-1
[4] Click [OK].
[5] In the “Cal Mode” field, type: 156
[6] Click [OK].
[7] In the “Cal Mode” field, type: 155
[8] Click [OK].
[9] Check that the “Dsc Calibration” window:
• displays “Data1=155”
• does not display “NG”
[10] Click “Test” to display the menu.
[11] Select “EIS Check”.
[12] Check that the “Dsc Calibration” window:
• displays
– “Data1=155”
– “ManualAdj OK”
• does not display “NG”
Adjustments
SM7648-1 – 11NOV05 35
[13] Click [OK].
Postrequisites:None
SERVICE MANUAL
36 11NOV05 – SM7648-1
LENS - “Lens Adjustment (90 cm)”
Adjustment Specification
Prerequisites:None
To Check:You cannot check this adjustment.
Purpose: To measure and store the values for the focus.
Do When: After installing a new:• CP1 BOARD - MCU
• MONITOR LCD AY
• LENS AY
Specification: The test results must comply with the specification values.• “AF_WIDE: ZW” focus at zoom position “Wide”
– -50<=ZW<=50
• “AF_MID1: ZM1” focus at zoom position center 1
– -25<=(ZM1-ZW)<=25
• “AF_MID2: ZM2” focus at zoom position center 2
– -35<=(ZM2-ZW)<=35
• “AF_MID3: ZM3” focus at zoom position center 3
– -25<=(ZM3-ZW)<=25
• “AF_MID4: ZM4” focus at zoom position center 4
– -25<=(ZM4-ZW)<=25
• “AF_MID5: ZM5” focus at zoom position center 5
– -30<=(ZM5-ZW)<=30
• “AF_MID6: ZM6” focus at zoom position center 6
– -30<=(ZM6-ZW)<=30
• “AF_TELE: ZT” focus at zoom position “Tele”
– -35<=(ZT-ZW)<=35
Special Tools: • SERVICE SOFTWARE
• Computer
• 5 V AC ADAPTER
• USB CABLE
• TARGET - Siemens star
Adjustments
SM7648-1 – 11NOV05 37
To Adjust:
[1] Set the CAMERA 90 +/- 0.5 cm (35.4 +/- 0.2 in.) from the TARGET by using:
• SLOT 4
• yellow holes in the CAMERA NEST
• TRIPOD MOUNT
[2] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[3] Click [Focus].
[4] Click [Yes] to continue.
[5] Check that the “Dsc Calibration” window:
• displays the adjustments within the specifications
• does not display “NG: X”
[6] Click [OK].
Postrequisites:None
P264_9001AA
STAR TARGET
SERVICE MANUAL
38 11NOV05 – SM7648-1
LENS - “Lens Adjustment (Infinity)”
Adjustment Specification
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Energize the COLLIMATOR.
[2] Set:
• COLLIMATOR to “infinity”
• CAMERA in the center of the screen of the COLLIMATOR without the LENS touching the COLLIMATOR
[3] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
Purpose: To measure and store the values for the focus.
Do When: After installing a new:• CP1 BOARD - MCU
• MONITOR LCD AY
• LENS AY
Specification: The test results must comply with the specification values.• “AF_I_WIDE: ZIW” focus at zoom position “Wide”
– -50<=ZIW<=50
• “AF_I_MID1: ZIM1” focus at zoom position center 1
– -25<=(ZIM1-ZIW)<=25
• “AF_I_MID2: ZIM2” focus at zoom position center 2
– -35<=(ZIM2-ZIW)<=35
• “AF_I_MID3: ZIM3” focus at zoom position center 3
– -25<=(ZIM3-ZIW)<=25
• “AF_I_MID4: ZIM4” focus at zoom position center 4
– -25<=(ZIM4-ZIW)<=25
• “AF_MID5: ZIM5” focus at zoom position center 5
– -30<=(ZIM5-ZIW)<=30
• “AF_MID6: ZIM6” focus at zoom position center 6
– -30<=(ZIM6-ZIW)<=30
• “AF_I_TELE: ZIT” focus at zoom position “Tele”
– -35<=(ZIT-ZIW)<=35
Special Tools: • SERVICE SOFTWARE
• Computer
• 5 V AC ADAPTER
• USB CABLE
• COLLIMATOR
Adjustments
SM7648-1 – 11NOV05 39
[4] Click “Test” to display the menu.
[5] Select “Infinity Cal.”.
[6] Check that the “Dsc Calibration” window:
• displays the adjustments within the specifications
• does not display “NG: X”
[7] Click [OK].
Postrequisites:None
SERVICE MANUAL
40 11NOV05 – SM7648-1
CCD - “Auto White Balance (AWB)”
Adjustment Specification
ImportantDo not use the CAMERA DOCK in this procedure.
Prerequisites:None
To Check:You cannot check this adjustment.
Purpose: To measure and store the values for the color balance of red, green and blue for the CCD.
Do When: • The color of the images is not correct.
• After installing a new:
– CP1 BOARD - MCU
– MONITOR LCD AY
– LENS AY
Specification: The test results must comply with the specification values.• “AGC”
– a1<1023
– a2<1023
– a3<1023
– a4<1023
– a5<1023
• “CHECK”
– wc0=128+/-2
– wc1=128+/-2
– wc2=130+/-40
• “MS”
– 2400<ms1<3500
– 2600<ms2<3800
• “MS_M”
– 2400<ms3<3600
– 2600<ms4<3700
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
• 5 V AC ADAPTER
• PATTERN BOX
Adjustments
SM7648-1 – 11NOV05 41
To Adjust:[1] Energize the PATTERN BOX.
[2] Set the PATTERN BOX:
• color temperature: 3100 +/- 20 K
• luminance: 900+/- 20 cd/m2
Important• The CAMERA LENS moves during the test.
• Hold the CAMERA against the PATTERN BOX carefully to stop light from entering.
[3] Place the CAMERA 0 cm (0 in.) from the PATTERN BOX without entering any light.
[4] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
CAMERA
PATTERN BOX(COLOR VIEWER)
P264_9003AA
SERVICE MANUAL
42 11NOV05 – SM7648-1
[5] Click [AWB].
[6] Click [Yes].
[7] Check that the “Dsc Calibration” window:
• displays values that are within the specifications
• does not display “NG”
[8] Click [OK].
Postrequisites:None
Adjustments
SM7648-1 – 11NOV05 43
CCD - “White Point Defect Detect”
Adjustment Specification
ImportantDo not use the CAMERA DOCK in this procedure.
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Energize the PATTERN BOX.
[2] Set the PATTERN BOX:
• color temperature: 3100 +/- 20 K
• luminance: 900+/- 20 cd/m2
Purpose: To measure and store the values for the number of white pixels.
Do When: • The image has pixels that should not be white.
• After installing a new:
– CP1 BOARD - MCU
– MONITOR LCD AY
– LENS AY
Specification: The “Dsc Calibration” window displays the number of pixels that have a malfunction.
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
• 5 V AC ADAPTER
• PATTERN BOX
CAMERA
PATTERN BOX(COLOR VIEWER)
P264_9003AA
SERVICE MANUAL
44 11NOV05 – SM7648-1
[3] Place the CAMERA 0 cm (0 in.) from the PATTERN BOX without entering any light.
[4] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[5] Click “Test” to display the menu.
[6] Select “CCD Defect”.
[7] Click [Yes].
Adjustments
SM7648-1 – 11NOV05 45
[8] Check that the “Dsc Calibration” window:
• displays values that are within the specifications
• does not display “detect_ng”
[9] Click [OK].
Postrequisites:None
SERVICE MANUAL
46 11NOV05 – SM7648-1
CCD - “Black Point and White Point Defect Detect”
Adjustment Specification
ImportantDo not use the CAMERA DOCK in this procedure.
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Energize the PATTERN BOX.
[2] Set the PATTERN BOX:
• color temperature: 3100 +/- 20 K
• luminance: 900+/- 20 cd/m2
Purpose: To measure and store the values for the number of black pixels.
Do When: • The image has pixels that are not correct.
• After installing a new:
– CP1 BOARD - MCU
– MONITOR LCD AY
– LENS AY
Specification: The “Dsc Calibration” window displays the number of pixels that have a malfunction.
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
• 5 V AC ADAPTER
• PATTERN BOX
CAMERA
PATTERN BOX(COLOR VIEWER)
P264_9003AA
Adjustments
SM7648-1 – 11NOV05 47
Important• The CAMERA LENS moves during the test.
• Hold the CAMERA against the PATTERN BOX carefully to stop light from entering.
[3] Place the CAMERA 0 cm (0 in.) from the PATTERN BOX without entering any light.
[4] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[5] Click “Test” to display the menu.
[6] Select “CCD Black”.
NoteThe test runs automatically.
SERVICE MANUAL
48 11NOV05 – SM7648-1
[7] Check that the “Dsc Calibration” window:
• displays values
– “number=0”
– “BK=0”
– “WT=0”
• does not display “detect_ng BLACK x, y”
[8] Click [OK].
Postrequisites:None
Adjustments
SM7648-1 – 11NOV05 49
PAF SENSOR - “Up and Down”
Adjustment Specification
ImportantDo not use the CAMERA DOCK in this procedure.
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Place the CAMERA on the TRIPOD and tighten the connection.
[2] Set the conditions for the TARGET:
• rotation is within +/- 10 degrees
• luminance: BV2-6
• temperature: 25 +/- 5° C
[3] Place the PAF SENSOR on the CAMERA 300 +/- 1 cm (118.1 +/- 0.4 in.) from the TARGET.
[4] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
Purpose: To measure and store the values for the up and down positions.
Do When: • The image is not correctly aligned vertically.
• After installing a new:
– CP1 BOARD - MCU
– MONITOR LCD AY
– LENS AY
Specification: The PAF SENSOR adjusts to match the TARGET.
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
• 5 V AC ADAPTER
• TARGET - up and down adjustment
• TRIPOD
SERVICE MANUAL
50 11NOV05 – SM7648-1
[5] Click [PAF Cal.].
[6] Check that the “PAF Calibration Dialog” window displays.
[7] Select “ON”. The GRAPH displays.
[8] Align the AF FRAME next to the center of the MONITOR LCD with the gray line in the TARGET.
[9] Adjust the PAF SENSOR to the correct up and down positions at the same time checking the GRAPH and values.
UP AND DOWN ADJUSTMENT TARGET
P264_9004AA
Adjustments
SM7648-1 – 11NOV05 51
[10] After adjusting the up and down positions, click [Up/Down Cal.] to set the adjustment value.
[11] Check that the value displays “PAF_up_down: OK”.
[12] Click [OK].
Postrequisites:None
SERVICE MANUAL
52 11NOV05 – SM7648-1
PAF SENSOR - “Uniform”
Adjustment Specification
ImportantDo not use the CAMERA DOCK in this procedure.
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Energize the PATTERN BOX.
[2] Set the PATTERN BOX:
• color temperature: 3100 +/- 20 K
• luminance: 900+/- 20 cd/m2
[3] Place the CAMERA 0 cm (0 in.) from the PATTERN BOX (COLOR VIEWER).
Purpose: To measure and store the values to provide a uniform focus and light of the image.
Do When: • The image focus and light are not uniform.
• After installing a new:
– CP1 BOARD - MCU
– MONITOR LCD AY
– LENS AY
Specification: The PAF SENSOR adjusts to match the TARGET in the PATTERN BOX.
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
• 5 V AC ADAPTER
• PATTERN BOX
CAMERA
PATTERN BOX(COLOR VIEWER)
P264_9003AA
Adjustments
SM7648-1 – 11NOV05 53
[4] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[5] Click [PAF Cal.].
[6] Check that the “PAF Calibration Dialog” window displays.
[7] Click [Uniformity].
[8] Click [Yes].
SERVICE MANUAL
54 11NOV05 – SM7648-1
[9] Check that the value displays “State=Unif OK”.
[10] Click [OK] to set and display the adjustment values.
Postrequisites:None
Adjustments
SM7648-1 – 11NOV05 55
PAF SENSOR - “Parallax”
Adjustment Specification
ImportantDo not use the CAMERA DOCK in this procedure.
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Place the CAMERA on the TRIPOD and tighten the connection.
[2] Set the conditions for the TARGET:
• rotation is within +/- 10 degrees
• luminance: BV2-6
• temperature: 25 +/- 5° C
[3] Place the PAF SENSOR on the CAMERA 300 +/- 1 cm (118.1 +/- 0.4 in.) from the TARGET.
[4] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
Purpose: To adjust the automatic focus feature of the CAMERA to prevent distortion or skew.
Do When: • The image has skew.
• After installing a new:
– CP1 BOARD - MCU
– MONITOR LCD AY
– LENS AY
Specification: The PAF SENSOR adjusts to match the TARGET.
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
• 5 V AC ADAPTER
• TARGET - parallax adjustment
• TRIPOD
SERVICE MANUAL
56 11NOV05 – SM7648-1
[5] Click [PAF Cal.].
[6] Check that the “PAF Calibration Dialog” window displays.
[7] Select “ON”.
NoteThe GRAPH displays.
PARALLAX ADJUSTMENT TARGET
P264_9006AA
Adjustments
SM7648-1 – 11NOV05 57
[8] Align the AF FRAME next to the center of the MONITOR LCD with the TARGET.
[9] Click [Parallax].
[10] Click [Yes] to continue.
[11] Check that the values display.
[12] Click [OK] to set the adjustment value.
Postrequisites:None
SERVICE MANUAL
58 11NOV05 – SM7648-1
PAF SENSOR - “Distance”
Adjustment Specification
Important• Do not use the CAMERA DOCK in this procedure.
• If the adjustment does not complete, the test starts again using the first temperature value.
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Place the CAMERA on the TRIPOD and tighten the connection.
[2] Set the conditions for the TARGET:
• rotation is within +/- 10 degrees
• luminance: BV2-6
• temperature: 25 +/- 5° C
Purpose: To adjust the automatic focus feature of the CAMERA for distance.
Do When: • The distance in the image is not correct.
• After installing a new:
– CP1 BOARD - MCU
– MONITOR LCD AY
– LENS AY
Specification: The test results must comply with the specification values.• Temperature when “TEMP” = a 2 point adjustment. For example, 25.0 - 250.
• L=XX:F=XX, each of the 7 series of adjustment values are “OK”
• DIST L, each of the 7 series of adjustment values are “OK”
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
• 5 V AC ADAPTER
• TARGET - distance adjustment
• TRIPOD
Adjustments
SM7648-1 – 11NOV05 59
ImportantThe TARGET is in 3 sections with the labels “1”, “2”, “3”.
[3] Assemble and adhere the TARGET to the wall.
(a) Align the sections of the TARGET with the labels “1”, “2”, “3” from right to left.
(b) Check that there are no spaces between the sections of the TARGET.
(c) Adhere the TARGET using tape.
[4] Place the PAF SENSOR on the CAMERA 300 +/- 1 cm (118.1 +/- 0.4 in.) from the TARGET.
[5] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[6] Click [PAF Cal.].
DISTANCE ADJUSTMENT TARGET
P264_9005AA
SERVICE MANUAL
60 11NOV05 – SM7648-1
[7] Check that the “PAF Calibration Dialog” window displays.
[8] Click [Calibration].
[9] Click [Yes].
[10] Check that the distance value displays.
Adjustments
SM7648-1 – 11NOV05 61
[11] Determine if the adjustment value is within the specification.
NoteThe test is not within specification if:
• any of the 7 series display “NG”
• “TEMP=0” displays
[12] Click [OK].
Postrequisites:None
SERVICE MANUAL
62 11NOV05 – SM7648-1
Setting the Defaults for the CAMERA - “Set Default”
Adjustment Specification
Prerequisites:None
To Check:You cannot check this adjustment.
To Adjust:[1] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[2] Click “Test” to display the menu.
Purpose: This feature allows the CAMERA to:• reset to the defaults
• prepare for user mode
Do When: After doing maintenance on the CAMERA.
Specification: “Initialize Complete !!” displays.
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
Adjustments
SM7648-1 – 11NOV05 63
[3] Select “Set Default”.
NoteAll user values are reset to the defaults.
[4] Check that “Initialize Complete !!” displays in the field.
Postrequisites:None
SERVICE MANUAL
64 11NOV05 – SM7648-1
Setting the ID for the CAMERA - “USB Storage”
Adjustment Specification
Prerequisites:None
To Check:[1] Do Step 1 to Step 3 in the “To Adjust” procedure.
To Adjust:[1] Do “Connecting to the SERVICE SOFTWARE” on Page 75.
[2] Click [Get] in “USB Storage”.
NoteThe ID values in the CAMERA display.
[3] Compare the serial numbers in the “Serial” field and on the LABEL on the CAMERA.
[4] If the serial numbers are not the same, enter the serial number from the CAMERA in the “Serial” field.
[5] Click [Set].
[6] If the “VID” field does not have “Kodak”, type: Kodak
[7] Click [Set].
Purpose: This feature allows the values to be written to the CAMERA:• VID
• PID
• serial number
Do When: After doing maintenance on the CAMERA.
Specification: The values match the CAMERA.
Special Tools: • SERVICE SOFTWARE
• Computer
• USB CABLE
Adjustments
SM7648-1 – 11NOV05 65
[8] If the “PID” field does not have “Digital Camera”, type: Digital Camera
[9] Click [Set].
[10] If the “Rev.” field does not have “1.00”, type: 1.00
[11] Click [Set].
Postrequisites:None
SERVICE MANUAL
66 11NOV05 – SM7648-1
Section 5: Replacements
ImportantYou must see the “Equipment Parts” on Page 10 for all parts information.
BACK COVER AY
Prerequisites:None
To Remove:
[1] Remove:
• COVER from the side
• PLATE
• 2 SCREWS A
• 2 SCREWS B
• HOLDER
• HOT SHOE COVER
• 2 SCREWS C
• COVER
• SCREW D
• SCREW E
• 6 SCREWS F
• 2 SCREWS G
[2] Disconnect the CONNECTOR CN193.
[3] Remove the BACK COVER AY.
To Install:[1] Reverse the steps in the removal procedure.
Postrequisites:None
P264_1004GC
G
G
FHOT SHOE COVER
COVER
BACK
COVER
PLATE
HOLDER A
B
C
DECN193
FCOVER AY
P264_1004GCA
Replacements
SM7648-1 – 11NOV05 67
MONITOR LCD AND VIEWFINDER AYs
Prerequisites:[1] Remove the BACK COVER AY.
To Remove:
[1] Remove the 3 SCREWS A.
[2] Disconnect the CONNECTORS:
• CN501
• CN171
[3] Remove:
• MONITOR LCD AY
• 2 SCREWS B
[4] Disconnect the CONNECTORS:
• CN502
• CN801
[5] Remove the VIEWFINDER AY.
To Install:[1] Reverse the steps in the removal procedure.
[2] Install the BACK COVER AY.
Postrequisites:None
P264_1005GC
B
A
MONITORLCD AY
CN502
CN801
B
A
VIEWFINDER AY
CN501
CN171
A
P264_1005GCA
SERVICE MANUAL
68 11NOV05 – SM7648-1
FRONT COVER AY
Prerequisites:[1] Remove:
• BACK COVER AY
• MONITOR LCD AND VIEWFINDER AYs
To Remove:
[1] Remove:
• 4 SCREWS A
• 2 SCREWS B
• FRONT COVER AY
To Install:[1] Reverse the steps in the removal procedure.
[2] Install:
• MONITOR LCD AND VIEWFINDER AYs
• BACK COVER AY
Postrequisites:None
P264_1006GC
FRONT COVER AY
AB
A
P264_1006GCA
Replacements
SM7648-1 – 11NOV05 69
CP1 BOARD - MCU
Prerequisites:[1] Remove:
• BACK COVER AY
• MONITOR LCD AND VIEWFINDER AYs
• FRONT COVER AY
To Remove:
Caution• Dangerous Voltage
• You must discharge the CAPACITOR at wires “GY” and “RD from the ST1 BOARD - CAPACITOR”.
[1] Remove SOLDER from wires:
• STROBE AY
– “WT”
– “BK”
– “GY”
– “PK”
• ST1 BOARD - CAPACITOR
– “GY”
– “RD”
P264_1007HC
BA
A
A
B
CP1 BOARD - MCU
P264_1007HCA
WT
GY
PK
MICROPHONE
SPEAKER
CN702
CN192
ST2CN302
BAT
TB1CN301
CN701
CN951CN101
TB2CN303
STROBE AYCN191
ST1
CN103
TB3
BLRD
WT
RD
WTBK GY
PK
GY
PK
GYRD
SERVICE MANUAL
70 11NOV05 – SM7648-1
• MICROPHONE
– “RD”
– “BL”
• SPEAKER
– “WT”
– “RD”
• TB3 BOARD - AC ADAPTER/USB CONNECTOR
– “PK”
– “GY”
[2] Disconnect the CONNECTORS:
• CN191
• CN303 from TB2
• CN103
[3] Remove:
• 3 SCREWS A
• 2 SCREWS B
[4] Carefully pull the CP1 BOARD - MCU toward you a small distance.
[5] Remove SOLDER from wires from the BATTERY:
• “GY”
• “PK”
• “WT”
[6] Disconnect the CONNECTORS:
• CN302 from ST2
• CN702
• CN301 from TB1
• CN701
• CN101
• CN951
• CN192
[7] Remove the CP1 BOARD - MCU.
To Install:[1] Reverse the steps in the removal procedure.
[2] Install:
• FRONT COVER AY
• MONITOR LCD AND VIEWFINDER AYs
• BACK COVER AY
Postrequisites:None
Replacements
SM7648-1 – 11NOV05 71
BATTERY COMPARTMENT AY, TB1 BOARD - SHUTTER AND MODE DIAL, AND ST1 BOARD - CAPACITOR
Prerequisites:[1] Remove:
• BACK COVER AY
• MONITOR LCD AND VIEWFINDER AYs
• FRONT COVER AY
• CP1 BOARD - MCU
To Remove:
[1] Remove 2 SCREWS A.
[2] Disconnect CN301.
[3] Remove:
• SOLDER from BATTERY COMPARTMENT AY at:
– “GY”
– “PK”
– “WT”
• SOLDER from ST1 BOARD - CAPACITOR
– “GY”
– “RD”
• SCREWS
– B
– C
– D
• TOP COVER
Caution• Dangerous Voltage
• You must discharge the CAPACITOR at the 4 SOLDER JOINTS on the top of the ST1 BOARD - CAPACITOR.
[4] Remove:
• TB1 BOARD - SHUTTER AND MODE DIAL
• SCREW E
• ST1 BOARD - CAPACITOR
P264_1010CCP264_1010CCA
BATTERY
ST1 BOARD
E
A
D
C
TB1
TOP COVERB
CN301
GY
WT
PK
RDGY
CN601
CAPACITOR
COMPARTMENTAY
BOARD
SERVICE MANUAL
72 11NOV05 – SM7648-1
To Install:[1] Reverse the steps in the removal procedure.
[2] Install:
• CP1 BOARD - MCU
• FRONT COVER AY
• MONITOR LCD AND VIEWFINDER AYs
• BACK COVER AY
Postrequisites:None
Replacements
SM7648-1 – 11NOV05 73
LENS, STROBE AY, MICROPHONE AY, and ST2, TB2, TB3 BOARDS
Prerequisites:[1] Remove:
• BACK COVER AY
• MONITOR LCD AND VIEWFINDER AYs
• FRONT COVER AY
• CP1 BOARD - MCU
• BATTERY COMPARTMENT AY, TB1 BOARD - SHUTTER AND MODE DIAL, AND ST1 BOARD - CAPACITOR
To Remove:
ImportantThe CONNECTOR NUMBERS described in the graphic are for your reference and are used in the preceding procedures.
[1] Remove:
• 3 SCREWS A
• LENS AY
• SCREW B
• STROBE AY
• SCREW C
• TB2 BOARD - FOCUS AND STROBE MODE
P264_1009HC
BL
RD
WT
RD
WTBK GY
PK
GY
PK A
B
LENS AY
STROBE AY
TB2 BOARD
C
DTB3 BOARD
EMICROPHONE
SPEAKER
FST2 BOARD
G
PAF AY
CN302
CN701
CN101
CN951
CN191CN303
CN103
CN702
CN191
CN303
MICROPHONE
SPEAKER
CN103
CN702
CN101
CN302
CN701
STROBE AY
TB3 BOARD
CN951
P264_1009HCA
SERVICE MANUAL
74 11NOV05 – SM7648-1
• SCREW D
• TB3 BOARD - AC ADAPTER/USB CONNECTOR
• SCREW E
• MICROPHONE AND SPEAKER AY
• SCREW F
• ST2 BOARD - STROBE POSITION
• SCREW G
• PAF AY
To Install:[1] Reverse the steps in the removal procedure.
[2] Install:
• BATTERY COMPARTMENT AY, TB1 BOARD - SHUTTER AND MODE DIAL, AND ST1 BOARD - CAPACITOR
• CP1 BOARD - MCU
• “FRONT COVER AY” on Page 68
• “MONITOR LCD AND VIEWFINDER AYs” on Page 67
• “BACK COVER AY” on Page 66
Postrequisites:None
Additional Service Procedures
SM7648-1 – 11NOV05 75
Section 6: Additional Service Procedures
Installing the SERVICE SOFTWARE [1] Which version of the Microsoft Windows OPERATING SYSTEM are you using?
[2] Which version of the Kodak EasyShare SOFTWARE are you using?
[3] From the Kodak Partner Site, make a copy of the .zip file of the “Software and Firmware” for the CAMERA.
[4] Decompress 3 files from the .zip file.
• “DscCalDi.exe”
• “camapi32.dll”
• “PTPApi32.dll”
[5] Make a folder on your HARD DRIVE for the software.
[6] Place the 3 files into the folder.
Connecting to the SERVICE SOFTWARE[1] Connect to the SERVICE SOFTWARE.
[2] Check:
• “Transfer” window displays
• green LED at the “ON” SWITCH of the CAMERA illuminates
Windows 98, ME, 2000 Windows XP
a. Install the Kodak EasyShare SOFTWARE.
b. Advance to Step 3.
Continue with Step 2.
Version 4 Version 5
a. Install the Kodak EasyShare SOFTWARE.
b. Continue with Step 3.
a. Select the “Custom” installation.
b. Load only the connection DRIVERS for the CAMERA.
c. Continue with Step 3.
To connect without the CAMERA DOCK To connect with the CAMERA DOCK
1. Connect:
• USB CABLE between the CAMERA and the computer
• 5 V AC ADAPTER to the CAMERA
2. Energize the CAMERA.
1. Connect:
• USB CABLE between the CAMERA DOCK and the computer
• 5 V AC ADAPTER to the CAMERA DOCK
2. Place the CAMERA on the CAMERA DOCK.
3. Energize the CAMERA.
4. Press the TRANSFER BUTTON on the CAMERA DOCK.
SERVICE MANUAL
76 11NOV05 – SM7648-1
[3] Click [Cancel].
[4] Double-click the “DscCalDi.exe” icon.
[5] Check that the screen for the SERVICE SOFTWARE displays.
[6] If the “Can not get version.” window displays when you run the SERVICE SOFTWARE:
• Click [OK].
• Check:
– CAMERA is energized
– connections for the USB CABLE
– connections for the 5 V AC ADAPTER
– connections to the CAMERA DOCK
– all of the SERVICE SOFTWARE files are installed in the folder. See “Installing the SERVICE SOFTWARE” on Page 75
Additional Service Procedures
SM7648-1 – 11NOV05 77
Preparing the Test Equipment
Using the PATTERN BOX[1] Energize the PATTERN BOX.
[2] Wait 30 minutes for the equipment to warm before using.
[3] Adjust:
• color temperature to 3100 +/- 20 K
• luminance to 900 +/- 20 cd/m2
Using the CAMERA NEST
DistancePlacement of
CAMERA NESTColor of STICKERS for
Placement of PINS Placement of TARGET
300 cm (118.1 in.) TRIPOD Green On the wall.
40 cm (15.7 in.) GEN II FIXTURE Yellow SLOT 4
114 cm (44.9 in.) GEN II FIXTURE Red SLOT 6
SERVICE MANUAL
78 11NOV05 – SM7648-1
Upgrading the Firmware Using the MEMORY CARD
ImportantWhen you install a new CP1 BOARD - MCU, the correct version of the firmware file must be installed.
[1] Connect the 5 V AC ADAPTER to the CAMERA.
[2] Energize the CAMERA.
[3] Check that “AUTO...” is selected for the “IMAGE STORAGE”.
[4] De-energize the CAMERA.
[5] Insert:
• MEMORY CARD in a CARD READER
• CARD READER in the computer
[6] Format the MEMORY CARD.
[7] Make a folder in the root directory on the MEMORY CARD with the name “System”.
[8] Obtain the firmware file “KP850nnn.FW” from the https://partner.kodak.com/ Web site.
[9] Make a copy of the new version of the “KP850nnn.FW” file.
[10] Install the “KP850nnn.FW” file into the “System” folder on the MEMORY CARD.
[11] Remove the MEMORY CARD from the computer.
[12] Install the MEMORY CARD into the CAMERA.
ImportantDo not select any other mode during the energizing.
[13] Energize the CAMERA.
[14] Check that the CAMERA energizes.
[15] Do the steps that display on the MONITOR LCD using the JOYSTICK to select:
• “Upgrade”
• “Continue”
[16] Check that downloading begins.
[17] Wait until downloading completes.
[18] When the downloading is completed, select either “Delete upgrade file” or “Exit”.
[19] De-energize the CAMERA.
[20] Remove the MEMORY CARD.
[21] Energize the CAMERA.
[22] Check that the firmware on the CAMERA is the correct version.
[23] If either of the following conditions occur, do this procedure again:
• upgrading the firmware was not successful
• 5 V AC ADAPTER is disconnected from the CAMERA during the downloading
Additional Service Procedures
SM7648-1 – 11NOV05 79
Upgrading the Firmware Using the Internal Memory[1] Obtain the firmware “KP850nnn.fw” from the https://partner.kodak.com/ Web site.
[2] Make a copy of the “KP850nnn.fw” file.
[3] Remove the MEMORY CARD from the CAMERA.
[4] Connect a USB CABLE to:
• CAMERA
• computer
[5] Energize the CAMERA.
[6] On the “EasyShare Transfer” window, click [Cancel].
[7] Select:
• “KP850nnn.FW” file
• Edit>Copy
[8] Double-click:
• “My Computer” icon
• “P850 Camera” icon
• “Internal Memory” folder
[9] Select:
• firmware file in the “Internal Memory” folder
• Edit>Paste
[10] De-energize the CAMERA.
[11] Disconnect the USB CABLE from:
• CAMERA
• computer
[12] Energize the CAMERA.
[13] Do the steps that display on the MONITOR LCD using the JOYSTICK to select:
• “Upgrade”
• “Continue”
NoteThe upgrading of the firmware file completes in less than 2 minutes.
[14] Select “Exit”.
[15] De-energize the CAMERA.
[16] Energize the CAMERA.
[17] Check that the firmware on the CAMERA is the correct version.
SE
RV
ICE
MA
NU
AL
8011N
OV
05 – SM
7648-1
Section 7:
Diagram
s
Blo
ckS
ystem O
verview
IC152LA73073CL
AddressData
USB-
X IN
X OUT
Driver
IC121TV00058002AQGH
PROGRAMFLASH
IC101SX8
SYSTEMASIC
MB87Q1201BGL-G-SANE1
POWER SUPPLY
POWER BLOCK
DC-DC Converter
PWA BLOCK
32.768kHzX3001
SYA BLOCK
8bitCPU
IC301
4MHz
X3002
Audio Amp DriverAudio out
V O
UT
A O
UT
A IN
IC181
SPEAKER
MIC
LENS BLOCK
A[1:21]D[0:15]
SD[0:31]SA[0:13]
IC951ST3 BOARDUPD168117AFCLENS DRIVER
Y+C
LENS
CN951
PPCS
PAF UNIT
AU
DS
D
AU
DC
KA
UD
LD
EDS2532AABH-EIC103SDRAM
48MHzX1101
SD CardCN141
Socket
BH6412KN-E2
Video Out
LCD Back-Light
USB+
SDI
SCKSREQ
SDO
MRSTCOMREQ
PON
FLC
TL
IC192ADCS7477AIMFX
PON
CN191
PA
FS
DA
TA
PA
FE
ND
TEMP
IC191TC7MH273FK
(D-FF)
+NAND
CP1(TCA) IMAGE STABILIZER
IC70216bitCPU
STROBO UNIT
Electronic 4Flash
STA BLOCK
IC195TC7MH273FK
(D-FF)
ASFLOUT
ASPAON,ASPAON3
FICTL
TILT SENSOR
IC193TS0002
VFA CIRCUIT
IC801KCD-A210-BA-TP
DMA(LCD)CIRCUIT
LCD
EVF
C
N17
1
SRCLK
ZCS0
SDWP,CDET CA1 BOARD
CCD BLOCK
IC901CXD3443GA
V. DRIVER
HD49353NPIC906
A/D C,H. DRIVER TK11130CSCL
IC904
REG
ICX495AQFIC903
CCD
ASPAONASPAON3A
TILTON
SELFLED
SELFLED
IC171
ANDSN74LVC1G08DCKR
IC172LM8261M5X/NOPB
VCOM AMP
IC182NJM2860F3-03
REG
CN
103
DOCKCONNECT
CN102
USB+USB-
USB+USB-
TEMP
2.5 inch
0.24 inch
VMUTE
CAMPWR
CAMPWRACPRDCIN
VRONLCDONLCDON2EVFON
ASSHUT1
ASSHUT2
EVFBLLCDBL
ZCARD
ACPRDCIN
VMONIT
ZJACKIN
CHG
CHGCTLCHGSEL
BATTEMP
BATTEMPLCDON
LCDON2EVFON
EVFBLLCDBL
CHGVRON
VMONIT
BATT+
BATT+
CHGSEL
CHGCTL
USBCNT_CUSBCNT_D
USBCNT_C
USBCNT_D
ZJACKIN OR
IC131TC7SH86FU
EXOR
CLK
2ON
USBCNT_C
USBCNT_D
VMUTECN
801
X7001
19.6608MHz
CN701
IC302BD4289FVM
BACK UP
EVF Back-Light
LCD Back-LightEVF Back-Light
JOGDIAL
TB4 BOARD
MODE DAILCMD DIALZOOM SWSHUTTER SW
TB1 BOARD
POWER LED
TB2 BOARD
FOCUS SWFLASH
LCD/EVF SW
IC194TC7PA17FUSCHMITT
ASSHUT1ASSHUT2
IC106TK11126CSCL
REG
IC197TC7SZ125FU
BUFFER
IC198TC7SZ125FU
BUFFER
IC199TC7PA17FUSCHMITT
CN501
CN502
HOT SHOE
CN561CN193
CN562
DOCSK DOSB DOOPS
DOCSK DOSB DOOPS
FICTL
ASFLOUT
DPDM
AVDD(AUDIO)
CN
301
CN
303
CN
101
CN
901
CN
671
TB3 BOARD CN
672
JK671DC+ , DC-
DC+ , DC-
EMC-03MB-RIC752
GYRO V
EMC-03MA-RIC751
GYRO H
IC726TC7WU04FU
INV
IC732 IC733BA5962FVM
AMP
IC729 IC724 IC722AD8542ARMZ
AMP
IC721NJU7043RB1
AMP
NJM12904RIC728 IC725 IC723
AMP
IC730M62354AGP
D/A C
IC754TC7W66FK
SWITCH
IC731TC74MH244FK
BUFFER
IC703TC7SET08FU
AND
IC701PST3646RL
RESET
IC753AD8542ARMZ
AMP
A/D C
BAT SWQ1402
ZCARD
System OverviewP264_0001FC_
Diag
rams
SM
7648-1 – 11NO
V05
81
CA
1 CIR
CU
IT - C
CD
LENS
CCD
+15.2V(A)-7.7V(A)
ICX495AQF
VD
D
VL
VOUTO_LPF
IC903
Q9001
Q9002
A3V8
A2,B3,B4,B9VHLD,V6,V7A,V7B
B8,A5,B7V4,V5A,V5B
B6,A7,C10V3A,V3B,VST
A8,B5,A9V1A,V1B,V2
C2SUB
24
15
IC906
CDS, AGC, A/D C
AD2
AD11
CCDEN
XSUB
IC101
IC195 CA1 DMA(MAIN)IC904
TK11130CSCL
+3.25V(D)+3.45V(A)
+3.0V
HD49353NP
21
15
CDS_in
DVdd3 DVdd12,AVdd12
CS
4
5
1ASPAON3
7,25
D[0:9]
11
1626
CS
UB
SU
B
14 V8
1,2,
3V1
A,V1
B,V2
IC901
V. DRIVER
CXD3443GA
23
H2A28
REG
H. DRIVER
CA1 CIRCUIT - CCD
29
CCDSDSdata 30
CCDCKSCK 31
TGVDVD_in 19
TGHDHD_in 18
ADCKCLK_in 17
H2A
10 H1A27
H1A13 H2B
19H2B
12 H1B18
H1B16 RG
17RG
+3.45V(A) -7.7V(A) +15.2V(A)
N9
SUBGTT6
SUBGT2W21
Y1
9
R2
P9
M9
U10
AD5
Y6
V1
XV8R9
XVH,XV6,XV7,XSG3B,XSG2C
T9,AC1,W2,AD3,Y5
XV4,XV5,XSG1B,XSG2B
V6,U9,AD4,AA6
XV3,XVS,XSG3A,XSG1C
AB2,W6,AA5,Y7
XV1,XV2,XSG1A,XSG2A
AA7,AE3,W5,AC2
13,1
0,11
,12
VHLD
,V6,
V7A,
V7B
7,8,
9V4
,V5A
,V5B
4,5,
6V3
A,V3
B,VS
T
XV8
XVH,XV6,XV7,XSG3B,XSG2C
XV4,XV5,XSG1B,XSG2B
XV3,XSG3A,XSG1C,XVS
XV1,XSG1A,XSG2A,XV2
J2
D2,K1,J10,E2,E1,J11
E10,F2,H10,F1,H11
G10,G2,F11,H1,K11
F10,H2,E11,J1,D11
XSUBB1
P264_0002FC_
SE
RV
ICE
MA
NU
AL
8211N
OV
05 – SM
7648-1
CP
1 BO
AR
D - M
CU
SDRAMController
256MbitSDRAM
SRAMController
SignalProcessor
AF/AE.AWBIntegrator
CLK.GEN
PIO
UART
12bitA/D CCDS AGC
CPU
32MbitFrash
DC-DCConverter
JPEG
LCDDisplay2.5inch
SYSTEMIC101
ASIC
Data1
Address1
Data2Address2
CP1 BLOCKSD Card
A OUT
LENS
4MHz
32.768KHz
USBUSB+
JTAG
Battery
8bitCPU
VideoDriverEVF
Driver
ElectoronicFlash
STA BLOCK
PWA BLOCK
SIO
AudioDriver
48.0MHz
V OUT
MIC
SPEAKER
Y+C
256MbitNAND
CA1 BLOCK
USB-
PO
8bitD/A
8bitA/D
8bitD/A
Encoder
LENSDriver
IS-CCD5Mega Pixcel
SG/TGCCDV. Driver
ADCK
To CA1To LCDTo EVF
To AUDIO
JPEGController Card
Control
SRCLKPAF UNIT
PAF
A/DIC192
Converter
GyroSensor
H,V
16bitCPU
Shift LENZDriver
EVFDisplay0.24inch
ASPAON3AASPAON
DOSCK DOSB DOOPSUSB TB3 BLOCK
AD DATA
JOG Dial
MODE DialCMD DialZOOM SWSHUTTER SW
SELF LED SELFLED
TB1 BLOCK
POWER LED
TILT
Slant1 Slant2
ST1 BLOCK
TB2 BLOCK
TB4 BLOCK
ST3 BLOCK
USB+AVJACK
DC JACK
DOCKCONNECTOR
FOCUSFLASHLCD/EVF
SYA BLOCK
TCA BLOCK
from SYA
SELFLEDTO PAF UNIT
SW
BAT SW
Extra Flash
IC103
IC121 IC121
IC906
IC901
IC903
IC951
IC702IC301
IC801IC152
IC181
CP1 BOARD - MCU P264_0004FC_
Diagrams
SM7648-1 – 11NOV05 83
LENS FPC
FOCUS A
FOCUS B
FOCUS /A
FOCUS /B
ZOOM /B
ZOOM B
ZOOM /A
ZOOM A
VCC ZOOM
SENS ZOOM
IRED ZOOM
VCC FOCUS
SENS FOCUS
IRED FOCUS
FC.M
ZM.M
3
1
12
14
13
15
4
2
17
16
10
20
9
21
14
13
IRIS DRIVER
SHUTTER DRIVER
LENS DRIVER
UNREG
PON
CW2/IN4A
OE21/IN3A
CLK2/IN3B
UPD168117AFCIC951
ZOOMPI
FOCUSPI
LENS BLOCKCN951
MODE3(IC101 AA24pin)
MODE4(IC101 AB25pin)
ZOE(IC101 G25pin)
ZCLK(IC101 U24pin)
ZCW(IC101 V21pin)
FOE(IC101 AE4pin)
FCW(IC101 AA25pin)
FCLK(IC101 V25pin)
FICTL(IC195 16pin)
MODE2(IC101 U20pin)
IC531
DD CONV.
BOOST5.25V
Q9502
Q9503
PICTL(IC101 R21pin)
ZPI(IC101 M25pin)
FPI(IC101 M20pin)
VM
45
59
47
29
60
48
58
57
44
31
49
30
41
40
IN6A
IN5B
IN5A
OE1
CW1
CLK1
FB1
FB2
IN6B
MODE2
MODE3
MODE4/IN4B
50, 61, 62, 63, 64
LENS FPC
7
6
8
9
11
10
OUT7B
IIN1(IC101 AA1pin)
IIN2(IC101 V5pin)
IIN3(IC101 U6pin)
IIN4(IC101 Y2pin)
SIN1(IC101 AA2pin)
SIN2(IC101 AB1pin)
SH DRV- 17
SH DRV+ 1652IN7A
IN7B4
OUT7A5
34ST.M
ZOOM DRIVER
FOCUS DRIVER
OUT1B
OUT1A
OUT2B
OUT2A
IG A
IG B
IG /A
IG /B
IR.M
18
20
19
21
25
23
28
27
OUT5B
OUT5A
OUT6B
OUT6A
OUT3A
OUT3B
OUT4A
OUT4B
Q9504
P264_0003EC_
SE
RV
ICE
MA
NU
AL
8411N
OV
05 – SM
7648-1
ST
RO
BE
CIR
CU
IT
STROBE CIRCUIT
UNREG(ST)
C5407Q5402Q5406
D5402, D5403 C5412(ST1)C5414(ST1)
POWER FILTERBLOCK
Q5405, D5406
OSCILLATIONCIRCUIT
EMISSIONCONTROLCIRCUIT
OSCILLATIONTRANSFORMER
RECTIFIERCIRCUIT
VOLTAGEMONITORCIRCUIT
Q5409
LIGHT EMISSION CIRCUIT
CHARGING CIRCUIT
TRIGGERCIRCUIT
LIGHT EMITTINGELEMENT
(XENON TUBE)
FLCTRL
VMONIT
CHG
TO DMA(MAIN)
TO PWA
CHGSEL
P264_0007FC_
Diag
rams
SM
7648-1 – 11NO
V05
85
Fu
nctio
nal
Po
wer D
istribu
tion
IC501
SWITCHINGCONTROL
MAX1566ETL+T
BAT+
DC+
L5008, Q5006STEP UPCIRCUITINVERTINGCIRCUIT
L5007, Q5007
STEP UPCIRCUIT
L5006STEP DOWN
CIRCUIT
L5005STEP UP
CIRCUIT
L5004
STEP DOWNCIRCUIT
-7.7V(A)
UNREG(SY)
+15V(L)
VDD3
+5V(L)
UNREG(ST)TO STA
BOOST5.25V
5.25V(T)
3.6V(E)
+3.45V(A)
+1.25V(D)
ASPAON
PON
VRON
LCDON
LCDON2
EVFON
ASPAON3A
LCDBL
EVFBL
1 EVFAN
2 EVFCA
+15.2V(A)
DL1
DL2
PVSD
LXM
LXSU
LXSD
VRVR501
ON
2
ON
3
L5009, Q5008STEP UPCIRCUIT
DL3
Q5018
Q5010
CN502
TO EVF
TO DMA(MAIN)
2940
18 14
2835 6
27
22
24
3436IC503
REGULATOR
IC502REGULATOR
CURRENTDEDECTORCIRCUIT
Power Distribution
Q5303,Q5304
8 7
1 LED_AN
2 LED_CA
CN501
TO LCD
Q5003
IC531,Q5301DC/DC
CONVERTER
Q5004
F5003
F5001TO TB3
TO BATTERY
F5004
F5005
F5002
ON
SU
ON
M
ON
SD
ON
1
4
Q5012
Q5013
P264_0005FC_
SE
RV
ICE
MA
NU
AL
8611N
OV
05 – SM
7648-1
Su
bsystem
Co
ntro
l
25
29
23
44
43
42
53
49
56781 2 3 4
41
36
9
59
2
BOOST5.25V
60
LI
IC302BATTERYBACKUP
BA
TO
FF
AL3
.2V
UN
RE
G
VD
D
RE
SE
T
ALWAYS3.2V
BACK UP
BACKUP_CTL
SCAN OUT0
IC3018bit MICRO
PROCESSORSCAN IN3
87F5932AU-TQFP7-E
SCAN IN4
12
13
SCAN IN1
11 SCAN IN0
SCAN IN2
SCAN IN5
SCAN OUT1
SCAN OUT2
5 PW LEDPWLED
28 SW3.2V ON
20
14
CMD IN2
SHUTTER 2nd
46
51
MDSW_AD
CMD IN1
PW LED
CMD IN 2
S2
MODE SW_AD
TO TB1 CN601
CN301
CMD IN 1
RESET
BAT_OFF
BATTERY
SCAN OUT3
34 SCAN OUT4
33 SCAN OUT5
VDD2
VDD1
VDD3
Subsystem Control
TO DMA(MAIN)
Z3001
Q3001
BOOST5.25VUNREG(SY)
PROG DRIVE PROG RAM
WIDE1
PROG EXP
SET DELETE
TELE2
UP
--
TELE1
INFO
OK
S1
--
MENU
LEFT DOWN
WIDE2
CARD--AVJACK
FAVORITE
PWSW
REVIEW
SHARE
FLASH FOCUS BAT_SW
AE/AF LOCK
RIGHT
PW_TEST--POP UP --LCD/EVF TEST
SW3.2VQ3002
CN301,CN302,CN303
BACKUP3.2V
63
1
64
50
54
57
58
55
61
6
17
19
31
45
21
X3001
X300232KHz
4MHz
SCK
SO
SI
SREQ
XIN
XOUT
XCOUT
XCIN
VMONIT
CHG ON
TO DMA(MAIN)
TO DMA(MAIN)
MAIN RESET
P ON
LCD BL
VMONIT
CHG
30USB_CONNECTUSBCNT_C
62DOCK USBUSBCNT_D
18DOCK CHGCHGCTL
52OP SERIALDOOPS
3DOCK SBDOSB
4DOCK SCKDOSCK
26CAMPWRACPR
SREQ
SDO
SDI
SCK
MRST
PON
LCDBL
COMREQCOMREQ_BOOT
LCDON
8LCD ON2 LCDON2
16 EVFBL
EVFON
EVF BL
15EVF ON
LCD ON
22
40
CHGSEL CHGSEL
DCINDC IN
32VR ON VRON
48PAF TEMP TEMP
24SELF LEDSELFLEDSELFCTL
Q3002
27TH ON
47BT TEMP
AL3.2V
BATTEMP
S3001
S3008
~
Q3003
Q3003
P264_0008FC_
12
11
16
10
15
Diag
rams
SM
7648-1 – 11NO
V05
87
Sch
ematics
System
BAT+
XKT
BAT-
RE
FLE
CT
OR
1
LENS
CP1(DMA)(TCA)(VFA)(SYA)(STA)(PWA)
SP-
XAN
2
ST1
FLA
SH
TRIGGER
CA1
TRG
SP+
TRANS
SD
SPEAKER
3
LCD
BAT_TBATTERY
PAF
BAT_SW
TB4 TB1
SC
AN
OU
T 4
TB2
SC
AN
OU
T 5
SC
AN
IN 1
SC
AN
IN 0
DC
-
DC
+
DC
-
DC
+
TB3 US
B/A
V
DO
CK
MIC+
MIC- MIC
POP UP
ST2 ST3System
EVF SOLENOID
CN
171
CN101
CN901
CN
141
CN
951
CN
191
CN102
CN
701
CN
801
CN
501
CN
103
CN
302
CN
301
CN
601
CN
303
CN
671
CN672
JK671
DC JACK
CN
502
CN
193
CN
561
CN
192
10VG
H
4N
C
11C
P1
5N
C
12C
P2
6N
C
13VG
L
7N
C
14D
00
8VD
D
15D
01
9VS
S
16D
0217
D03
18D
0419
D05
20D
06
1N
C2
NC
3N
C
21D
0722
CLK
23C
SY
NC
(VD
)24
VS
S(H
D)
25LO
RD
26SC
LK27
SDAT
A28
RES
ET29
POL
30VD
D31
VSH
32VS
S33
VCO
M Z1Z2
10 XV2
4 +3.45V(A)
11 XV8
5 +3.25V(D)
12 XSG1A
6 ASPAON3
13 XV1
7 SUBGT2
14 XSG3A
8 SUBGT
15 XV3
9 XV4
16 XSG2B17 XV518 XSG2C19 XV720 XVS
1 GND
DMA DMA DMA TCA DMA PWA VFA PWA DMA
2 GND3 ASPAON4
21 XVH22 XV623 XSG1B24 XSG2A25 XSG3B26 XSG1C27 XSUB28 AD1129 AD1030 AD931 AD832 AD733 AD634 AD535 AD436 AD337 AD238 AD139 AD040 CCDCK41 CCDSD42 CCDEN43 GND44 ADCK45 GND46 TGHD47 TGVD48 -7.7V(A)49 +15.2V(A)50 GND51 GND
Z1 Z2
10CCDEN
4-7.7V(A)
11CCDSD
5TGVD
12CCDCK
6TGHD
13AD0
7GND
14AD1
8ADCK
15AD2
9GND
16AD317AD418AD519AD620AD7
1GND2GND3+15.2V(A)
21AD822AD923AD1024AD1125XSUB26XSG1C27XSG3B28XSG2A29XSG1B30XV631XVH32XVS33XV734XSG2C35XV536XSG2B37XV338XSG3A39XV140XSG1A41XV842XV243XV444SUBGT45SUBGT246ASPAON347+3.25(D)48+3.45(A)49ASPAON450GND51GND
Z1Z2
10
CAR
D
4VD
D
11C
OM
MO
N W
5C
LOC
K
12C
OM
MO
N C
6VS
S
13
WP
7D
ATA0
8D
ATA1
9D
ATA2
1D
ATA3
2C
OM
MA
ND
3VS
S Z1Z2
10IR
ED
FO
CU
S
4ZO
OM
B
11V
CC
FO
CU
S
5N
C
12FO
CU
S /A
6S
EN
S Z
OO
M
13FO
CU
S B
7V
CC
ZO
OM
14FO
CU
S A
8IR
ED
ZO
OM
15FO
CU
S /B
9S
EN
S F
OC
US
16S
H D
RV
+17
SH
DR
V-
18IG
/A19
IG B
20IG
A
1ZO
OM
/A2
ZOO
M /B
3ZO
OM
A
21IG
/B
Z1Z2
10TH
EM
ISTE
R
4R
WC
LK
11AF
DAT
A
5R
ESET
12AL
3.2V
6EN
D
13S
ELF
LED
7D
GN
D8
VDD
9AG
ND
1N
C2
AD
EX
TEN
D3
AFC
ENZ1Z2
10 AVJDET
4 NC
11 AUDIO
5 NC
12 CD2
6 NC
13 GND
7 SCK
14 BAT+
8 SB
15 BAT+
9 CHG_CTL
16 VIDEO17 GND18 D-19 D+20 VBUS1
1 CAMPWR2 CAMPWR3 NC
21 VBUS222 CD323 OP_SERIAL24 CD1
Z1 Z2
25 GND26 GND
Z3 Z4
10P
DR
IVE
A
4Y
HA
LL IN
-
11P
DR
IVE
B
5P
HA
LL IN
+
12Y
DR
IVE
A
6P
HA
LL O
UT-
13Y
DR
IVE
B
7P
HA
LL O
UT+
8P
HA
LL IN
-9
GN
D
1Y
HA
LL IN
+2
Y H
ALL
OU
T+3
Y H
ALL
OU
T-
Z1Z2
10D
WN
4VS
S
11IN
V
5VD
D
12VS
6C
K1
13H
S
7C
K0
14VI
DBL
8SL
EEP
15VI
DG
L
9R
GT
16VI
DR
L17
VID
BH18
VID
GH
19VI
DR
H20
VEE
1VE
E2
TOU
T23
TOU
T1Z1Z2
1LC
DAN
2LC
DC
A Z1Z2
4VC
C5
VID
EO6
GN
D7
AUD
IO8
AV
DE
T(G
)
1G
ND
2+D
3-D
Z1Z2
1S
CA
N IN
1F
2S
CA
N O
UT
5
Z1Z2
10M
OD
E S
W_A
D
4S
CA
N IN
2
11S2
5S
CA
N IN
3
12PW
LED
6S
CA
N O
UT
0
13A
LWA
YS
3.2V
7S
CA
N IN
4
14B
OO
ST5
.25V
8S
CA
N IN
5
15C
MD
IN 1
9S
CA
N O
UT
4
16C
MD
IN 2
17G
ND
1S
CA
N O
UT
12
SC
AN
IN 0
3S1
18G
ND
Z1Z2
19G
ND
10M
OD
E S
W_A
D
4C
MD
IN 2
11S
CA
N O
UT
4
5C
MD
IN 1
12S
CA
N IN
5
6B
OO
ST5
.25V
13S
CA
N IN
4
7A
LWA
YS
3.2V
14S
CA
N O
UT
0
8PW
LED
15S
CA
N IN
3
9S2
16S
CA
N IN
217
S1
1G
ND
2G
ND
3G
ND
18S
CA
N IN
0Z1Z2
19S
CA
N O
UT
1
4S
CA
N IN
1
1S
CA
N O
UT
42
SC
AN
OU
T 5
3S
CA
N IN
0
Z1Z2
4VC
C5
VID
EO6
GN
D7
AUD
IO8
AV
DE
T(G
)
1G
ND
2+D
3-D
Z1Z2
4VCC5VIDEO6GND7AUDIO8AVDET(G)
1GND2+D3-D
Z1Z2Z3Z4
1
23
1E
VFA
N2
EVFC
A Z1Z2
4C
AFLC
E5
CA
FLC
LK6
CAF
LDT
1VD
D3
2X
3G
ND
Z1Z2
4C
AFLC
E5
CA
FLC
LK6
CAF
LDT
1VD
D3
2X
3G
ND Z1
Z2
1SO
LE+
2SO
LE- Z1
Z2
DMA
DMA
DMA
DMA
SYA SYA DMA PWA SYA DMA
W1-02300/SX823-WKO
STA
CN562
4CAFLCLEHOT SHOE
TO EXT STROBO
1X2CAFLCLK3CAFLDT
PWA
P264_0009FC_
SE
RV
ICE
MA
NU
AL
8811N
OV
05 – SM
7648-1
CP
1 BO
AR
D - M
CU
, 1 of 6
(XSG1B)
(XSG1C)
(XSG
2B)
(XSG
2C)
(XS
G3A
)
(XS
G3B
)
(XV
H)
(XV
S)
(XV
1)
(XV
2)
(XV
3)
(XV
4)
(XV
5)
(XV
6)
(XV
7)
(XV
8)
(ZW
AIT
/RD
Y)
(WLA
N)
(ZC
S1)
(DA
CK
)
(PP
CS
)
(RT
S)
(TX
D1)
(TX
D0)
(BR
CK
)
(CT
S)
(RX
D1)
(RX
D0)
(XSG
2A)
(BLCK)
(XSG1A)
(XV
9)
(XV
10)
(CP
OB
)
(HB
LK)
(XS
UB
)
(PB
LK)
(CP
DM
)
(SU
BG
T)
(XV
13)
(XV
14)
(XV
15)
(CD
ET
)
21
25
38
50
6587
111
128
141175
186
217250
11
18
24
37
4158
76
134
150208
223
235248
TO MIC
MIC+
TO SPEAKER
MIC-
TO SD
TO VFA TO VFA
TO PAF
TO LCD
DMA (LCD)
TO LENS
DMA (LENS)
TO CA1 CN901
TO SYA
DMA (MAIN)
TO STA
TO PWA
TO TB3 CN671
DOCKCONNECT
PROGRAM FLASH + NANDSP+
SP-
VIDEOOUT
VIDEOOUT
TO TCA
SDRAM
360;
1/16
DR
1072
1M;1/16JR1069
A_V
DD
1.2
A_VDD3
100;
1/20
D
0603
R10
67
CL180
68P
;CH
C10
27
CL182
1;BC1019
VDD3
CL179
1;B
CB
106
CL178
1.5K;1/20J
0603
R1509
A_VDD1.2
CL188
A_V
DD
3
VDD3
CL183
4.7;B
1608
C1903
0;1/
20Z
0603
R10
07
2.7K
;1/2
0D06
03
R10
53
CL184
CL185
CL181
CL187
4.7;
B
1608
C10
55
1;BC1020
C1076
4.7;B1608
CL175
A_VDD3
A_VDD1.2
CL186
1;BC1010
4.7;B
1608
C1902
1;BC1011
VDD3
1;B
CB
102
2SA2029-RQ1501
68P
;CH
C10
28
BK1608LL241L1002
2.2;1/20J
0603R1050
1;B
C10
24
R10621K;1/20J
0603
48.0
00M
Hz
1AV
4V10
B68
40G
X11
01
R1004
10K;1/20J
0603
2.7K;1/20D0603
R1055
1;BC1005
CL176
1;BCB107
1;B
CB
101
REG2.6V
TK11126CSCLQTK11126CS-GG
IC106
4.7;
B16
08
C19
06
0;1/
20Z
0603
R10
09
2.4K
;1/2
0D
0603
R12
531.
2K;1
/20D
0603
R12
54
1.2K
;1/2
0D06
03
R10
12
A_V
DD
1.2
FBMH1608HM102L1001
VDD3
A_V
DD
3
R106410K;1/20J
0603
1;B
CB
103
1.2K
;1/2
0D
0603
R10
59
1.2K
;1/2
0D
0603
R10
601.
2K;1
/20D
0603
R10
73
1.5K;1/20J
0603R1302
BK1005HM102L1301
BK1608LM751
1608
L1305
AV
R-M
1608
C12
0MT
1608
VA
132
AV
R-M
1608
C12
0MT
1608
VA
131
0.1;BC1504
75;1/20D
0603
R1503
VDD3
1;BC1008
1;BC1009
1;BC1015
1;BC1016
10K
;1/2
0J
0603
R10
10
2.2;
1/20
J
0603
R10
02
4.7;
B16
08
C10
22
2.2K;1/20J
0603
R1308
10K;1/20J
0603
R1201
1;B
C12
01
1;B
C12
02
10K;1/20J
0603
R1202
VDD3
100
RB
122
100
RB
122
100
RB
122
100
RB
122
4.7;
B
1608
C18
24
4.7;
B16
08C
1826
4.7;
B16
08
C18
03
1;B
C18
34
1;B
C18
32
1;BC1830
0.1;BCB184
1;B
C18
33
1;BC1831
4.7;
B
1608
C18
23
1;B
C18
35
0603 R
1812
470K
;1/2
0J
REG3.0V
QNJM2860F303PNJM2860F3-03
IC182
LABIAS
SPBIAS
REG
EVR
LOGIC
LPF
ALC
OdBOdB
+6.5dB
OdB
OdB
30K
+7dB
15K
+42.5dB
+6.5dB
-+
LINEMUTECTRL
BH6412KN-E2QBH6412KN---P
IC181
VDD3
22K;1/20D
0603
R1703
+ -
IC172QXXAGB004---P
LM8261M5X/NOPB
DTA144EMQ1401
10K
RB
141
+5V(L)
1AV4J11VE330GCN171
CK1C
475K
PJBN
G
4.7;
B
H=1
.45
2125
C17
12
2.2;1/20J
0603
R1712
VDD3
3.6V(E)
4.7K
;1/2
0D
0603
R17
01
VDD3
1;B
H=0
.91608
C17
04
CLKSW
1;B
CB
171
33K
;1/2
0J
0603
R17
11
CK1E105KGQBNG
1;B
H=0.9
1608C1701
2.7K;1/20D
0603
R1713
10;B
H=0
.95
2125
C17
13
3K;1/20D
0603
R1709
1;B
C17
071;
BC
1702
VDD3
EM
D12
Q14
02
+15V(L)
TC7MH273FKQTC7MH273FK-P
IC191
IC195
VDD3
AD
CS
7477
AIM
FX
QA
DC
S74
77A
IMP
IC19
2
2.2;1/20J
0603
R1710
VDD3
10KRB142
10;B
2125C1706
2.2;1/20J
0603
R1714
VDD3
3.6V(E)
EVFCK
EVFEN
EVFHD
EVFSD
LCDD0
LCDD1
LCDD2
LCDD3
LCDD4
LCDD5
LCDD6
LCDD7
EVFVD
EVFSLEEP
P_GND0.1;B0603
C9509
VDD3
0.1;
B06
03C
9506
200;1/16JR9513
P_GND
200;1/16JR9512
10K
;1/1
6J
R95
07
0.1;
B06
03C
9505
P_GND
6.8K;1/16DR9504
VDD3
EM
H16
Q95
03
39K
;1/1
6JR
9519
10K;1/16JR9501
0.1;B
0603
C9508
0.1;B0603
C9510
6.8K;1/16DR9505 UPD168117AFC
QXXAG8117AFCG
IC951
-7.7V(A)
+15.2V(A)
LCDON2
UNREG(SY)
BOOST5.25V
VMONIT
CHG
CHGSEL
VRON
ACPR
EVFON
LCDON
PON
DCIN
DOOPS
COMREQ
MRST
USBCNT_D
USBCNT_C
DOSB
EVFBL
DOSCK
CHGCTL
ZCARD
SCK
SDO
SDI
SREQ
+3.45V(A) +3.45V(A)
+5V(L)
VDD3
DCIN
+15.2V(A)
-7.7V(A)
+15.2V(A)
-7.7V(A)
+1.25V(D) +1.25V(D)
UNREG(ST)
BOOST5.25V
+15V(L)
VDD3
ACPR
LCDON
VRON
ASPAON
EVFBL
UNREG(SY)
LCDON2
LCDBL
3.6V(E)3.6V(E)
VMONIT
FLCTRL
BATT+
+5V(L)
PON
5.25V(T)5.25V(T)
VDD3
EVFON
BOOST5.25V
+15V(L)
VDD3
CHG
BATTEMP
CAMPWR
22K
;1/2
0J
0603
R13
09
VDD3
75;1/20D
0603
R1310
1;B
C13
01
BATTEMP
CHGSEL
RB
521S
-30
D19
01
VDD3
330;1/16JR1912
VDD3
330;1/16JR1911
330;1/16JR1910
UNREG(ST)
LCDBL
VDD3
+3.45V(A)
1AV4J11VW130GCN191
AL3.2V
SELFLED
TEMP
1AV4J11VE510GCN101
1AV4J11B7360GCN102
1AV4J10UC064GCN193
RB521S-30D1701
RB
521S
-30
D17
02
VDD3
+1.25V(D)
+15.2V(A)+15.2V(A)
+1.25V(D)
VDD3
100
RB
101
100
RB
101
100
RB
101
100
RB
101
100
RB
102
100
RB
102
100
RB
102
100
RB
102
100
RB
104
100
RB
104
100
RB
104
100
RB
104
100
RB
105
100
RB
105
100
RB
105
100
RB
105
100
RB
106
100
RB
106
100
RB
106
100
RB
106
100RB110
100RB110
100RB110
100RB110
10K;1/20J
0603
R1307
10K
;1/2
0J
0603
R10
03
39K
;1/2
0D06
03
R18
11
27K
;1/2
0D06
03
R18
01
2K;1/20D0603
R1815
100
RB
111
100
RB
111
100
RB
111
100
68;1/16JR1715
1AV4J11VN212GCN951
2.2K;1/16DR9503
2.2K;1/16DR9506
330P;BC9502
1AV4J10EZ021GCN192
TO SOLENOID
EM
D12
Q13
06
100
RB
113
100
RB
113
100
RB
113
100
RB
113
100
RB
114
100
RB
114
100
RB
114
100
RB
114
100
RB
115
100
RB
115
100
RB
115
100
RB
115
TS0002
TILT SENSOR
1AV4U22B0190G
IC193
330P;B
C1077
0.022;B
C1810
0.022;B
C1829
150P;CHC9501
1000
P;B
C95
03
1000
P;B
C95
04
1000
P;B
C95
13
1000P;BC9511
UNR32A3Q1301
EM
D3
Q13
02
UP04213Q1303
UNR32A3Q1304
UNR32A3Q1902
NSBA123JDXV6Q9502
270;
1/16
DR
1054
27;1/16DR1303
27;1/16DR1304
220RB132
TV00058002AQGHQTV58002AQGHP
IC121
FBMH1608HM470
1AV4L3DU470PG
L1302
FBMH1608HM470
1AV4L3DU470PG
1608L1303
LCDPWM
LCDPWM
100
RB
107
100
RB
107
100
RB
107
100
RB
107
4.7;
B
1608
C15
15
2.2;
B
1608
C15
13
2.2;
B
1608
C15
12
R15
0122
K;1
/20J
0603
TOK
TSTB
5.25V(T) 5.25V(T)
TTXD
VDD3
TRXD
VDD3
TCLK
TSHT
CLKSW
IC152QLA73073CL-EJ
LA73073CL
0.1;BC1822
ZDOCKDET
ZJACKIN
SN74LVC1G08DCKRQSN74LVC1G08P
IC171
FBMH1608HM102
1608L1003
VDD3
CN1031AV4J11SL082G
EDS2532AABH-EQEDS2532AAB7N
IC103
100
RB
103
100
RB
103
100RB109
100RB109
100
RB
116
100
RB
116
100
RB
121
100
RB
121
CL189
CL190
CL191
STABON
68;1
/16J
R10
21
100;
1/20
J
0603
R10
11
200;1/16JR1814
390;
1/16
JR
1903
1K;1/20J
0603
R1901
33K
;1/2
0J
0603
R19
02
33K
;1/2
0J06
03
R19
04
33K
;1/2
0J
0603
R19
05
1;B
C1001
1;BC1002
1;BC1003
1;B
C1004
1;BC1901
1AV4J11B7580GCN141
BK
1005
LL24
1
L100
4
LMCLK
0;1/20Z0603
R1015
0;1/20ZR1013
ASPAON3A
10K;1/20J0603
R1716
10K;1/20J
0603R1717 470;1/16JR1718
470;1/16JR1719
470;1/16JR1720
2.2;B
1608C9514
10
33K
;1/2
0J06
03
R95
15
33K
;1/2
0J06
03
R95
16
2PD1820AR,115Q1901
470;
1/16
JR
1068
1;B
1608
C13
13
DTC143ZMQ1908
470K
;1/2
0J
0603
R19
13
VDD3
SHUT2
SHUT1
VDD3
TC7MH273FKQTC7MH273FK-P
VDD3
1;BC1023
1;BC1025
1;BC1026
1;BC1029
4.7;B
1608C1031
VD
D3
TC7SH86FUQTC7SH86FUJFP
IC131
1;BC1032
470K;1/20J
0603
R1914
2.7K;1/16DR9502
39K
;1/1
6DR
9509
1;1/6FR9511
100;
1/20
J06
03
R10
16
100;
1/20
J06
03
R10
17B
K10
05LL
241
L100
5
68;1/16JR1402
68;1/16JR1403
68;1/16JR1404
68;1/16JR1405
68;1/16JR1406
1K;1/20J
0603
R1305
1K;1/20J
0603
R1311
MB87Q1201BGL-G-SANE1QXXAGQ1201BEN
ASIC
IC101
TC
7SZ
125F
UQ
TC
7SZ
125F
U-P
IC19
7
TC
7SZ
125F
UQ
TC
7SZ
125F
U-P
BU
FF
ER
BU
FF
ER
SC
HM
ITT
IC19
8T
C7P
A17
FU
QT
C7P
A17
FU
--P
IC19
9
TC
7PA
17F
UQ
TC
7PA
17F
U--
P
IC19
4
BK1005LL241L1011
BK1005LL241
L1012
22;1/16JR1005
BK1005LL241L1701
C10
14
220P
;B
0.02
2;B
C10
13
0.1;
BC
1836
0.1;
BC
1837
EMH16Q9504
68K;1/16DR9523
68K;1/16DR9524
2.4K
;1/2
0D06
03
R10
58
240K
;1/1
6DR
1301
R95
1839
K;1
/16D
RB
521S
-30
1608
D17
03
0.1;
BC
1302
100;1/20J
0603
R1704
7P;C
H
1608
C10
66
7P;C
H
1608
C10
67
10K;1/20J
0603
R1203
47K
;1/2
0J
0603
R12
04
12
34
12
34
1 234
1 2
3 4
12
34
123 4
5
12
34
12
34
56
78
1 2
3 4
1234
5
1234567
8910
11
12
13
14
15 16 17 18 19 20 21
22
23
24
25
26
27
28
Z1Z2
Z3 Z4
123 4
5
12
34
56
78
10 VGH
4 NC
11 CP1
5 NC
12 CP2
6 NC
13 VGL
7 NC
14 D00
8 VDD
15 D01
9 VSS
16 D0217 D0318 D0419 D0520 D06
1 NC2 NC3 NC
21 D0722 CLK23 CSYNC(VD)24 VSS(HD)25 LORD26 SCLK27 SDATA28 RESET29 POL30 VDD31 VSH32 VSS33 VCOM
Z1 Z2
12
34
1234 5 6
1 CLR
2 Q1
3 D1
4 D2
5 Q2
6 Q3
7 D3
8 D4
9 Q4
10 GND 11CK
12Q5
13D5
14D6
15Q6
16Q7
17D7
18D8
19Q8
20VCC
1VD
D
2GN
D
3VI
N4
SCLK
5SD
ATA
6CS
1 2
3 4
5 6
7 8
1234 5 6
A1
N.C.
1
B1LGND2
C1VDD3
D1OUT7B4
E1OUT7A5
F1VM76
G1FB77
H1N.C.8
H2OUT3B9
H3OUT3A10
H4PGND3411
H5VM3412
H6OUT4B13
H7OUT4A14
H8N.C.15
G8OUT1B16
F8
OUT1
A
17
E8PG
ND12
18
D8VM
12
19
C8OU
T2B
20
B8OU
T2A
21
A8N.
C.
22
A7OU
T5B
23
A6VM
56
24
A5OU
T5A
25
A4PG
ND56
26
A3OU
T6A
27
A2OU
T6B
28
B2CW
2/IN
4A
29
C2CL
K1
30
D2OE
1
31
E2
COSC
32
F2 FIL733
G2 IN7B34
G3 SELVREF735
G4 VREF736
G5 VM3437
G6 FB438
G7 FIL339
F7 FB240
E7 FB141
D7 VM1242
C7 FB343
B7 IN6A44
B6 MODE245
B5 MODE146
B4 MODE4/IN4B47
B3
CLK2/IN3B48
C3
CW1
49
D3IN
5B
50
E3R7
51
F3IN
7A
52
F4SE
L7
53
F5FI
L4
54
F6FI
L2
55
E6FI
L1
56
D6IN
5A
57
C6IN
6B
58
C5M
ODE3
59
C4OE
2/IN
3A
60
D4IN
5B
61
E4IN
5B
62
E5IN
5B
63
D5IN
5B
64
10 THEMISTER
4 RWCLK
11 AFDATA
5 RESET
12 AL3.2V
6 END
13 SELFLED
7 DGND8 VDD9 AGND
1 NC2 ADEXTEND3 AFCEN
Z1 Z2
10XV2
4+3.45V(A)
11XV8
5+3.25V(D)
12XSG1A
6ASPAON3
13XV1
7SUBGT2
14XSG3A
8SUBGT
15XV3
9XV4
16XSG2B17XV518XSG2C19XV720XVS
1GND2GND3ASPAON4
21XVH22XV623XSG1B24XSG2A25XSG3B26XSG1C27XSUB28AD1129AD1030AD931AD832AD733AD634AD535AD436AD337AD238AD139AD040CCDCK41CCDSD42CCDEN43GND44ADCK45GND46TGHD47TGVD48-7.7V(A)49+15.2V(A)50GND51GND
Z1Z2
10 AVJDET
4 NC
11 AUDIO
5 NC
12 CD2
6 NC
13 GND
7 SCK
14 BAT+
8 SB
15 BAT+
9 CHG_CTL
16 VIDEO17 GND18 D-19 D+20 VBUS1
1 CAMPWR2 CAMPWR3 NC
21 VBUS222 CD323 OP_SERIAL24 CD1
Z1 Z2
25 GND26 GND
Z3 Z4
4 CAFLCE5 CAFLCLK6 CAFLDT
TO ST3 CN561
1 VDD32 X3 GND
Z1 Z2
12
34
56
78
12
34
56
78
12
34
56
78
12
34
56
78
12
34
56
78
1 2
3 4
5 6
7 8
12
34
56
78
10 IRED FOCUS
4 ZOOM B
11 VCC FOCUS
5 NC
12 FOCUS /A
6 SENS ZOOM
13 FOCUS B
7 VCC ZOOM
14 FOCUS A
8 IRED ZOOM
15 FOCUS /B
9 SENS FOCUS
16 SH DRV+17 SH DRV-18 IG /A19 IG B20 IG A
1 ZOOM /A2 ZOOM /B3 ZOOM A
21 IG /B
Z1 Z2
1 SOLE+2 SOLE-
Z1 Z2
1 2 3456
12
34
56
78
12
34
56
78
12
34
56
78
1
2 345
Z1 Z2
1 2 3456
123 4
56
123 4
56
1 2
3 4
5 6
7 8
A1
NC
A2
NC
A9
NC
A10
NC
B1
NC
B2
NC
B3
NC
B4
ALE
B5
VSS
B6
VCCn
B7
/CEn
B8
NC
B9
NC
B10
NC
C1
NC
C2
NC
C3
/WPn
C4
/WEn
C5
CLE
C6
/WE
C7
/REn
C8
R/Bn
C9
NC
C10
NC
D1
NC
D2
A1
D3
A6
D4
NC
D5
NC
D6
NC
D7
A8
D8
A12
D9NC
D10NC
E1VSS
E2A2
E3A5
E4A18
E5NC
E6NC
E7A19
E8A11
E9A15
E10VSS
F1NC
F2A3
F3A7
F4NC
F5/RESET
F6NC
F7A20
F8A10
F9A14
F10NC
G1NC
G2A4
G3A17
G4NC
G5NC
G6/CEf
G7NC
G8A9
G9A13
G10NC
H1
NC
H2
DQ8
H3
DQ2
H4
DQ11
H5
NC
H6
NC
H7
NC
H8
DQ12
H9
DQ6
H10
DQ15
J1
A0
J2
/OE
J3
DQ1
J4
DQ10
J5
/WP
J6
VCCf
J7
NC
J8
DQ5
J9
DQ14
J10
A16
K1
VSS
K2
DQ0
K3
DQ9
K4
DQ3
K5
R/Bf
K6
NC
K7
DQ4
K8
DQ13
K9
DQ7
K10
VSS
L1
NC
L2
I/O0
L3 I/O1
L4 NC
L5 I/O3
L6 NC
L7 I/O6
L8 I/O7
L9 NC
L10 NC
M1 NC
M2 NC
M3 NC
M4 I/O2
M5 NC
M6 VCCn
M7 I/O5
M8 NC
M9 NC
M10 NC
N1 NC
N2 NC
N3 NC
N4 NC
N5 VSS
N6 I/O4
N7 NC
N8 NC
N9 NC
N10 NC
P1 NC
P2 NC
P9 NC
P10 NC
12
34
56
78
12345 6
78910
123 4
5
4 VCC5 VIDEO6 GND7 AUDIO8 AVDET(G)
1 GND2 +D3 -D
Z1 Z2
R9DQ2
R8DQ0
R7VDD
P9DQ4
P8VSSQ
P7VDDQ
N9VDDQ
N8DQ3
N7DQ1
M9VDDQ
M8DQ5
M7DQ6
L9VSSQ
L8DQ7
L7VDD
K9DQM0
K8WE
K7CAS
J9RAS
J8CS
J7BA0
H9A11
H8BA1
H7NC
G9A1
G8A0
G7A10
F9VDD
F8DQM2
F7A2
E9VSSQ
E8DQ16
E7NC
D9VDDQ
D8DQ18
D7DQ17
C9VDDQ
C8DQ20
C7DQ22
B9DQ19
B8VSSQ
B7VDDQ
A9DQ21
A8DQ23
A7VDD
A2 DQ24
A1 DQ26
G1 A4
D1 VSSQ
R3 VSS
R1 DQ13
P2 VDDQ
A3 VSS
C1 VSSQ
N3 DQ14
N1 VSSQ
M3 DQ9
M1 VSSQ
C3 DQ25
L2 DQ8
K3 NC
K1 DQM1
J2 CKE
H3 NC
H1 A7
C2 DQ27
G2 A5
B1 DQ28
B2 VDDQ
D3 DQ30
E1 VDDQ
R2 DQ15
P3 VSSQ
P1 DQ11
N2 DQ12
E3 NC
M2 DQ10
L3 VSS
L1 VDDQ
K2 NC
J3 A9
J1 CLK
H2 A8
F2 DQM3
F1 VSS
E2 DQ31
G3 A6
F3 A3
B3 VSSQ
D2 DQ29
12
34
1 2
3 4
12
34
12
34
10 WP
4 VDD
11 COMMON W
5 CLOCK
12 COMMON C
6 VSS
13 CARD
7 DATA08 DATA19 DATA2
1 DATA32 COMMAND3 VSS
Z1 Z2
1 CLR
2 Q1
3 D1
4 D2
5 Q2
6 Q3
7 D3
8 D4
9 Q4
10 GND 11CK
12Q5
13D5
14D6
15Q6
16Q7
17D7
18D8
19Q8
20VCC
1234
5
E2
AVDD
C1
YOUT
B2
AVSS
D1
AVSS
D2
VREF
C
F5
VRC
F2
AVDD
E1
UOUT
F1
VOUT
L13
VSS
T13
VDDI
G2
PSEL
2
K5
PSEL
1
H2
PSEL
0
H1
TEST
1
K1
TEST
0
J2
VDP
M10
VDDI
L11
VSS
J1
CKIN
0
L10
VDDE
G1
ZRST
N13
VSS
N10
VDDI
M2
VDDE
L1
XIN
M1
VSS
N1
XOUT
K2
AVDE
1
J6
AVSE
1
K6
VCI
L6
CPO
N2
AVDE
0
L5
AVSE
0
L2
AVD1
J5
AVS1
V2
CCDV
DDI
U1
CCDV
DDE
V1
ADCK
W1
CCDV
SS
P1
CCDV
DDI
R1
GPIO
B0
M6
GPIO
B1
M5
GPIO
B2
N6
GPIO
B3
P2GP
OB4
T1
GPOB
5
P5
GPOB
6
J9
HOTP
R10
VDDE
L12
VSS
R2
CCD1
1
N5
CCD1
0
R5
CCD9
U2
CCD8
P6
CCD7
R6
CCD6
M17
VDDI
T5
CCD5
K9
CCD4
T2
CCD3
U5
CCD2
L9
CCD1
Y1
CCD0
AD2
VDDE
R11
VSS
M9
GPOF
29
P9
GPOF
28
U10
GPOF
27
T6
GPOF
26
N9
GPOF
25
Y2
GPOF
24
U6
GPOF
23
V5
GPOF
22
L15
CLKV
SS
K15
VDDI
AA1
GPOF
21
AB1
GPOF
20
AA2
GPOF
19
R9
GPOF
18
T9
GPOF
17
AC1
GPOF
16
V6
GPOF
15
U9
GPOF
14
AB2
GPOF
13
W5
GPOF
12
B24
VDDE
L14
VSS
AC2
GPOF
11
W6
GPOF
10
Y5
GPOF
9
W2
GPOF
8
AA5
GPOF
7
AD3
GPOF
6
AA6
GPOF
5
AE3
GPOF
4
P13VSS
Y7GPOF3
AD4GPOF2
AA7GPOF1
AE4GPOF0
P12VSS
AD5TGVD
Y6TGHD
AE5CSYNC
Y8ZSREQ
AD6SDO
AA8SCK
P11VSS
AE6SDI
T15VDDE
R12VSS
AE7SRCLK
M13VSS
AD7CKRE
AA9ZRCE
AE8ZRAS
Y9ZCAS
AD8SA14
U11SA13
M15VSS
AE9SA12
Y10SA11
AD9SA10
AA10SA9
AE10SA8
M12VSS
T14VDDE
AD10SA7
U12SA6
AE11SA5
AA11SA4
AD11SA3
U13VDDI
M11VSS
AE12SA2
Y11SA1
AE13SA0
AA12ZRWE
AD12DQM3
T10VDDE
AD13DQM2
Y12DQM1
AA13DQM0
AE14SD31
Y13SD30
AD14SD29
AA14SD28
AE15SD27
U14VDDI
AD15SD26
Y14SD25
AE16SD24
AA15SD23
AD16SD22
Y15SD21
R13VSS
AE17SD20
AA16SD19
AD17SD18
Y16SD17
P14VSS
AE18SD16
AA17SD15
Y17SD14
AD18SD13
AA18SD12
AE19SD11
AD19SD10
Y19SD9
AA19SD8
AE20SD7
Y18SD6
AD20SD5
AD24VDDE
R14VSS
AE21SD4
U15SD3
AD21SD2
U16SD1
AE22SD0
Y20GPOC45
AD23GPOC44
AA20GPOC43
AD22GPOC42
T11VDDE
AE23GPOC41
U17GPOC40
AA21GPOC39
W21GPOC38
AC24GPOC37
Y21GPOC36
AC25
GPOC
35
W20
GPOC
34
V20
GPOC
33
AB24
GPOC
32
V21
GPOC
31
AB25
GPOC
30
R15
VSS
AA24
GPOC
29
U20
GPOC
28
AA25
GPOC
27
U21
GPIO
C26
Y24
GPIO
C25
T17
GPIO
C24
Y25
GPIO
C23
N14
VSS
P17
VDDI
T20
GPIO
C22
W24
GPIO
C21
T21
GPIO
C20
W25
GPIO
C19
R17
GPIO
C18
V24
GPIO
C17
R20
GPIO
C16
V25
GPIO
C15
T16
VDDE
U24
GPIO
C14
R21
GPIO
C13
U25
GPIO
C12
L17
GPIO
C11
T24
GPIO
C10
P16
VDDI
T25
GPIO
C9
P20
GPIO
C8
R24
GPIO
C7
P21
GPIO
C6
R25
GPIO
C5
K17
GPIO
C4
P24
GPIO
C3
N20
GPIO
C2
P25
GPIO
C1
N21
GPIO
C0
N24
GPIO
E11
N17
VDDI
N15
VSS
N25
GPIO
E10
M20
GPIO
E9
M25
GPIO
E8
M21
GPIO
E7
M24
GPIO
E6
J17
GPIO
E5
L20
GPIO
E4
L21
GPIO
E3
L25
GPIO
E2
K20
GPIO
E1
L24
GPIO
E0
K12
VDDI
J25
TRAC
ECLK
R16
VDDE
K24
TRAC
ESYN
C
K21
PIPE
STAT
2
M14
VSS
J20
PIPE
STAT
1
K25
PIPE
STAT
0
H25
TRAC
EPKT
3
J21
TRAC
EPKT
2
J24
TRAC
EPKT
1
J16
TRAC
EPKT
0
N16
VDDI
L16
VDDE
H20
GPIO
D15
H24
GPIO
D14
H21
GPIO
D13
G25
GPOD
12
E25
GPOD
11
G24
GPOD
10
G20
GPOD
9
F25
GPOD
8
G21
GPOD
7
K13
VDDI
F24
GPOD
6
F20
GPOD
5
D25
GPOD
4
E20
GPOD
3
D24
GPOD
2
E21
GPOD
1
E24
GPOD
0
F21
GPIO
A4
C25
GPIO
A3
C24
GPOA
2
F19
GPOA
1
B23
GPOA
0
T12
VDDE
E19
ZCS0
A23
ZWE
F18
ZRE
B22
A21
K14 VDDI
A22 A20
B21 A19
E18 A18
A21 A17
E17 A16
B20 A15
F17 A14
A20 A13
B19 A12
E16 A11
A19 A10
F16 A9
B18 A8
M16 VDDI
A18 A7
E15 A6
B17 A5
A17 A4
F15 A3
J15 A2
B16 A1
J14 PLLVDD
A16 PLLVSS
A15 MCLK
K16 CLKVDDE
B15 D15
E14 D14
A14 D13
F14 D12
B13 D11
P15 VSS
B14 D10
E13 D9
A13 D8
K11 VDDE
E11 D7
F13 D6
F11 D5
F9 D4
J13 D3
E9 D2
F12 D1
E12 D0
J12 USBVDDI
B10 USBVDDE
B12 NC(AVJF2)
B11 NC(AVJF1)
A12 NC(RPU)
A11 NC(FSDP)
A10 DP
A9 DM
A8 NC(FSDM)
B8 NC(AVDF1)
E7 NC(EXTI2K)
B9 USBVSS
J11 PLLVSS
J10 PLLVDD
F10 TCK
H6 TMS
E10 TDI
G6 TMODE
P10 VDDI
N11 VSS
H5 TRST
F8 TSEL
N12 VSS
K10 VDDE
E8 RTCK
F7 TDO
A7 AVDD
F6 VRH
E6 VRA
A6 AIN0
A5 AIN1
C2 AVSS
B7 AVSS
B3 VRN
A3 AOUT
E5 VRP
B5 AVDD
A4 AVSS
B6 VREFY
B4 VRY
A1 NC
A2 NC
A24 NC
A25 NC
B1 NC
B25 NC
G5 NC
AD1 NC
AD25 NC
AE1 NC
AE2 NC
AE24 NC
AE25 NC
1 2IN
A
3GN
D4
OUTY
5Vc
c1
GG
2IN
A
3GN
D4
OUTY
5Vc
c1
1A
2GN
D
32A
42Y
5Vc
c
61Y
11A
2GN
D
32A
42Y
5Vc
c
61Y
1234
56
ASFLCLK+TXD0
ZFWR
ZFRD
JTEST1
TCK
TMS
TRST
TDI
TDO
TMODE
RTCK
MRST
TSEL
AD
CK
SRCLK
SCK
CKRE
SA13
ZCAS
ZRAS
ZRCE
SA12
SA11
SA8
SA9
SA10
JTE
ST
1
AD
11
AD
10
AD
8
AD
9
AD
6
AD
5
AD
7
AD
2
AD
3
AD
1
AD
4
AD
0
SDI
SREQ
SDO
SA7
SA6
SA0
SA1
SA2
SA3
SA4
SA5
ZRWE
DQM3
DQM2
DQM1
DQM0
SD31
SD30
SD29
SD28
SD27
SD26
SD24
SD21
SD25
SD22
SD19
SD18
SD17
SD20
SD15
SD14
SD13
SD16
SD11
SD10
SD9
SD12
SD7
SD6
SD5
SD8
SD3
SD2
SD1
SD4
SD0
ZSWP
EVFEN
EVFSD
EVFCK
AUDCK
AUDSD
AUDLD
TSTB
TSH
T
STX
ZCW
MO
DE
4
MO
DE
3
MO
DE
2
ZSC
E
SA
LE
FCW
SC
LE
ZSR
E
ZSW
E
SD
WP
CR
ZB
CD
ET
ZCLK
PIC
TL
CD
6
CD
4
CD
7
CD
5
CD
2
CD
3
CD
1
CD
0
FCLK
TRX
D
CLK
2ON
LCD
LBR
T
LCD
VC
OM
D
PA
FE
ND
SLA
NT
1
SLA
NT
2
ZPI
FPI
TOK
LCD
RE
SE
T
PO
PU
PO
N
CO
MR
EQ
ZFW
R
ZFR
D
A21
A20
A19
A18
A17
A16
A15
A10
A13
A12
A9
A11
A14
A8
A7
A6
A5
A4
A3
A2
A1
D15
D14
D13
D12
D10
D11
D9
D8
D6
D7
D4
D5
D2
D3
D0
D1
USBD+
USBD-
TMS
TDI
TSEL
TCK
TMODE
TRST
RTCK
TDO
ASICAOUT
ASICAIN
VDD3
USBSET
USBD-
USBD+
SD23
AS
FLC
E
FOE
SIN
1
XV
7
XV
5
XV
1
XV
S
XS
G3B
XS
G3A
XS
G2C
EV
FS
LEE
P
DOSCK
DOSB
DOOPS
CHGCTL
PA
FS
DA
TA
ZCS
0
AS
FLC
LK+T
XD
0
CSYNC
TTXD
TCLK
PP
CS
ZOE
SC
LE
CD0
A16
D5
A4
D14
CD3
A8
A17
CD6
D0
CD7
A21
D9
CD2
D3
CD5
D4
CD4
D13D
7
A7
CD1
ZFW
R
A11
A15
A5
A18
A10
A14
A2
D8
A9
D2
A13
D11
A3
ZSR
E
ZSC
E
D12
A6
A1
SA
LE
D6
A19
ZFR
D
CR
ZB
D15
A20
D1
ZSW
E
A12
D10
ZCS0
AUDLD
ASICAOUT
ASICAIN
AUDCK
AUDSD
EVFSLEEP
D2 LCDVCOMD
PAFADEXTEND
EVFVD
D3
D6
LCDD1
LCDD7
PAFADEXTEND
LCDD6
LCDD0
D7
LCDD6
PAFCEN
CDET
LCDD3
LCDEN
VMUTE
LCDD5
PAFRWCLK
LCDCK
LCDD4
PAFCEN
SDCLK
LCDD3
PAFRWCLK
LCDD2
D4
L15V
LCDD1
LCDD2
D5
LCDD0
EVFSD
LCDLBRT
L3V
EVFHD
LCDSD
LMCLK
VDD3
EVFEN
3.6V(E)
POL
LCDD4
EVFCK
LCDD5
PA
FS
DA
TA
LCDRESET
D0
PAFEND
L5V
D1
MODE4
IIN2
FCLK
IIN3
MODE3
BOOST5.25V
PICTL
IIN4
FPI
FOE
ZPI
IIN1
MODE2
ZCW
FCW
ZOE
ZCLK
SIN2
SIN1
VRON
BOOST5.25V
BATTEMP
LCDON2
USBCNT_D
UNREG(SY)
ZDOCKDET
LCDON
CHG
VMONIT
CHGSEL
SREQ
DOOPS
SDI
COMREQ
SDO
SCK
ZCARD
CHGCTL
DCIN
ZJACKIN
ACPR
DOSCK
DOSB
EVFBL
USBCNT_C
EVFON
PON
MRST
UNREG(ST)
5.25V(T)
LCDBL
LCDON2
EVFON
PON
+1.25V(D)
BATT+
+5V(L)
+3.45V(A)
VDD3
+15V(L)
3.6V(E)
BOOST5.25V
-7.7V(A)
UNREG(ST)
DCIN
+15.2V(A)
FLCTRL
VMONIT
UNREG(SY)
CHGSEL
CHG
VDD3
+15.2V(A)
CLK2ON
AU
DIO
OU
T
VDD3
ZJACKIN
PAFRESET
PAFRESET
PP
CS
MRST
EVFBL
ASPAON
US
BS
ET
MRST
TILTON
POPUPON
FLD
ET
FLD
ET
AS
FLD
T
FLA
SD
T
LCDON
BATTEMP
CAMPWR
ACPR
VRON
BOOST5.25V
LCDBL
SUBGT2
SUBGT
XV4
XV2
XV8
XSG1A
XV1
XSG3A
XV3
XSG2B
XV5
XSG2C
XV7
XVS
XVH
XV6
XSG1B
XSG2A
XSG3B
XSG1C
XSUB
AD11
AD10
AD9
AD8
AD7
AD6
AD5
AD4
AD3
AD2
AD1
AD0
CCDCK
CCDSD
CCDEN
ADCK
TGHD
TGVD
AL3.2V
SELFLED
TEMP
FLC
TR
L
CC
DS
D
CC
DE
N
CC
DC
K
IIN4
IIN3
IIN2
IIN1
SIN
2
XV
6
XV
3
XV
2
XV
H
XS
G2B
TGHD
TGVD
XSG1A
XSG1B
XSG1C
LCDD7
CSYNC
MR
ST
FD0
FD1
FD3
CM
D
FD2
SLANT1
SLANT2
LCD
SD
LCD
EN
LCD
CK
LCD
D7
LCD
D0
LCD
D2
LCD
D5
LCD
D1
LCD
D3
LCD
D4
LCD
D6
EV
FV
D
EV
FH
D
USBCNT_C
USBCNT_D
CAMPWR
BATT+
LCDPWM
LCDPWM
XV
8
XS
UB
SU
BG
T2
SU
BG
T
XSG2A
XV
4
VMUTE
TSHT
TSTB
TOK
VDD3
TTXD
TCLK
TRXD
5.25V(T)
TEMP
AL3.2V
SELFLED
SD7
SD4
SD16
SD2
SA1
SA13
SA4
SRCLK
DQM1
SD10
SD29
SD12 SD3
SA5
SD25
SA8
SA6
SD26
SA7
SD9
SD28
SD23
SD14
SD27
SD30
SD21
SD11
SD31
SD5
ZRWE
SA10
ZRCE
SD18
ZCAS
DQM2
SD13
SD8
SD22
CKRE
DQM3
SD15
ZRAS
SD6
SD20
SA0
SA2
SA11
SA12
SA3
SD24
SD19
SD1
SA9
DQM0
SD0
SD17
STABON
ST
AB
ON
ASPAON4
LMCLK
LMC
LK
ASPAON3
ASPAON3
STX
FLDET
FLASDT
VDD3
ASFLCE
ASFLCLK+TXD0
ASFLOUT
ASFLDT
SHUT2
SHUT1
AS
SH
UT
2
AS
SH
UT
1
VD
D3
ASSHUT1
ASSHUT2
SHUT2
SHUT1
D10
D8
MRST
TILTON
ASFLOUT
PPCS
D12
ASPAON
D9
ASPAON3
D11
SD
CLK
CMD
FD0
FD1
FD2
FD3
ZCARD
SDWP
AUDIOOUT
D13
FICTL
FICTL
ZSW
P
VIDEO AMP
AUDIO
LENS DRIVER
TO SYA
TO SYA
D1-02300/SX823-WKO
VOLTAGE: VIEW MODE, LCD ON
1.2
3.25
A/D
C
D-FF
D-FF
TO DOCK
SC
HIM
ITT
3.25
GND
GAINCTL
SAVCTL
GND
V IN
VCC
V OUT
ND1
CLKOUT
VCC_N
3.25
3.25
4.99
15.0
VOLTAGE: VIEW MODE, LCD ON
VOLTAGE: VIEW MODE, LCD ON
CP1 BOARD - MCU1 of 6P264_0010FC_
Diagrams
SM7648-1 – 11NOV05 89
CP1 BOARD - MCU, 2 of 6 and ST2 BOARD - STROBE POSITION
SP
VM
1101
00S
6801
12
34
SY
A
PR
OG
DR
IVE
TELE
2TE
LE1
FAV
OR
ITE
PR
OG
RA
M0
SE
T
4
RE
VIE
W
PW
SW
1 2SC
AN
IN3
S1
--
--
-- ----INFO
1
ME
NU
20
WID
E1
SC
AN
OU
T5
3 4
PR
OG
EX
P
DE
LETE
AE
/AF
LOC
K
UP
OK
RIG
HT
LEFT
SH
AR
ED
OW
N
BA
T_S
W
5
FLA
SH
FOC
US
LCD
/EV
FP
OP
UP
CA
RD
PW
_TE
ST
TES
T
WID
E2
REV
IEW
SHAR
E
INFO
DEL
ETE
MEN
U
SET
AE/A
F LO
CK
AV
JAC
K
4.000MHzX3001
BK
UP
CT
L
SELFCTL
PW
LED
33KRB301
PW
LED
SE
LFC
TL
CM
DIN
1
CM
DIN
2
EML17Q3001
10;BC3001
1K;1/20JR3001
1;BCB301
150KRB306
UN
RE
G(S
Y)
SC
K
SR
EQ
SD
O
SD
I
VM
ON
IT
BK
UP
CT
L
CH
G
ZC
AR
D
EV
FO
N
MR
ST
PO
N
LCD
ON
CO
MR
EQ
CH
GC
TL
DO
SB
DO
SC
K
AC
PR
US
BC
NT
_C
US
BC
NT
_D
DC
IN
DO
OP
S
0.1;BC3005
0.1;BC3003
0.1;
BC
3011
0.1;
BC
3012
BA
TT
EM
P
10KRB302
1;BC3004
CH
GS
EL
LCD
ON
2
EV
FB
L
CM
DIN
1
CM
DIN
2
EMB11Q3002
10K
;1/2
0DR
3007
BO
OS
T5.
25V
ZD
OC
KD
ET
ZJA
CK
IN
SI1
D
SI3
D
SI5
D
SI2
D
SI4
D
1.5K
;1/2
0JR
3004
MD
SW
_AD
0.1;BC3010
MD
SW
_AD
100KRB303
VR
ON
0.01;BCB302
1AV
4J10
UC
044G
CN
303
TO T
B2
ZJA
CK
IN
ZC
AR
D
1AV
4J11
VE
190G
CN
301
TO T
B1
CN
601
LCD
BL
ZJA
CK
IN
ZC
AR
D
1000P;BCB303
TEM
P
SE
LFLE
D
1AV4D20B09300
ML614-TZ14Z3001
68;1
/16J
R30
10
100K
;1/2
0DR
3008
2.4V DE
T
3.3V DE
T2.
9VDET
3.2VREG
GND
REST
ALWAYS+LI
UNREG
ALWAYS
BD4289FVMQBD4289FVM--J
IC302
0.1;BC3002
EMD3Q3005
220
RB
311
0;1/20ZR3013
0;1/20Z R3016
0;1/
20Z
R30
18
0;1/
20Z
R30
19
1KR
B30
5
HN
1D01
FE
D30
01
HN
1D01
FE
D30
02
HN
1D01
FE
D30
03
EMH11Q3003
32.7
68K
Hz
1AV
4V10
B63
70G
X30
02
1K;1
/20J
R30
21
1AV
4J10
QL0
22G
CN
302
LCD
PW
M
82;1
/16J
R30
11
EV
QP
QH
B55
S30
02
EV
QP
QH
B55
S30
03
EV
QP
QH
B55
S30
04
EV
QP
QH
B55
S30
05
EV
QP
QH
B55
S30
06
EV
QP
QH
B55
S30
07
EV
QP
QH
B55
S30
08
10K
;1/2
0DR
3017
1KRB309
ZD
OC
KD
ET
33KRB307
1K;1
/20J
R30
20
1K;1
/20J
R30
22
EMD3Q3006
1SS400D3007
1K;1/20JR3014
1K;1/20J R3015
1;BC3013
1;BC3015
AL3
.2V
22K;1/20JR3006
22K;1/20JR3005
220
RB
310
MA
6S12
1D
3008
MA
4S11
1D
3004
SI1
D
SI2
D
SI3
D
SI4
D
SI5
D
1000P;BC3009
330;
1/16
JR
3002
3.3K;1/16JR3023
3.3K;1/16JR3024
3.3K;1/16JR3025
10K;1/16JR3026
10K;1/16JR3027
SH
UT
1
SH
UT
2
1K;1
/20J
R30
28
1K;1
/20J
R30
29
SO
Q-1
52C
LST
S30
01
12P;CHC3008
12P;CHC3007
820K
;1/2
0JR
3003
10K
;1/2
0JR
3030
RN4981FEQ3004
87F
5932
AU
-TQ
FP
7-E
QX
XA
GF
3271
22N
IC30
1
8bit
MIC
RO
PR
OC
ES
SO
R
1
2
3
12
34
56
78
123 4
5
12
34
12
34
12
34
56
78
123 4
56
12
34
56
78
12
34
4S
CA
N IN
1
1S
CA
N O
UT
42
SC
AN
OU
T 5
3S
CA
N IN
0 Z1Z2
10M
OD
E S
W_A
D
4S
CA
N IN
2
11S2
5S
CA
N IN
3
12P
W L
ED
6S
CA
N O
UT
0
13A
LWA
YS
3.2V
7S
CA
N IN
4
14B
OO
ST5
.25V
8S
CA
N IN
5
15C
MD
IN 1
9S
CA
N O
UT
4
16C
MD
IN 2
17G
ND
1S
CA
N O
UT
12
SC
AN
IN 0
3S1
18G
ND Z1
Z2
19G
ND
12
34
12345
678
1234
56
12
34
56
78
12
34
56
78
4561 2 3
4561 2 3
4561 2 3
123 4
56
1 234
1S
CA
N IN
1F
2S
CA
N O
UT
5
Z1Z2
12
34
56
78
12
34
56
78
1234
56
12
34
1 2 3456
1 234
1 2 3
4 5 6Z1
Z2Z3
Z4
1234
56
1
SCK
2
BACK
UP_C
TL
3
DOCK
SB
4
DOCK
SCK
5
PW L
ED
6
CHG
ON
7
LCDP
WM
8
LCD
ON2
9
VDD2
10
VSS2
11
SCAN
IN0
12
SCAN
IN1
13
SCAN
IN2
14
SHUT
TER
2nd
15
EVF
ON
16EVF BL
17 MAIN RESET
18 DOCK CHG
19 P ON
20 CMD IN2
21 LCD ON
22 CHG SEL
23 SCAN IN5
24 SELF LED
25 SCAN IN3
26 CAMPWR
27 TH ON
28 SW3.2V ON
29 SCAN IN4
30 USB_CONNECT
31 LCD BL
32 VR ON
33SCAN OUT5
34
SCAN
OUT
4
35
VSS3
36
VDD3
37
RDSE
L
38
CLK(
SFW
)
39
DATA
0(SF
W)
40
DC IN
41
SCAN
OUT
3
42
SCAN
OUT
2
43
SCAN
OUT
1
44
SCAN
OUT
0
45
COM
REQ_
BOOT
46
MDS
W_A
D
47
BT T
EMP
48PAF TEMP
49BAT_OFF
50SREQ
51CMD IN1
52OP SERIAL
53RESET
54XCIN
55XCOUT
56VSS1
57XIN
58XOUT
59VDD1
60BATTERY
61VMONIT
62DOCK USB
63SO
64SI
SO
1
SO
2
SI2
SI1
SO
0
SO
3
SO
2
SO
1
SO
4
SO
5
SI5
SI0
SI0
SI3
SI5
SH
UT
TE
R2n
d
SO
0
SI4
AL3
.2V
SI3
SI1
SO
4
SO
5
SI4
SI2
SO
3
SHUT
TER2
nd
BA
CK
UP
3.2V
SW
3.2V
POP
UP
!
TO
DM
A(M
AIN
)
ST2
S2-
0230
0/S
X82
3-W
KO
Y1-
0230
0/S
X82
3-W
KO
VOLT
AG
E: V
IEW
MO
DE,
LC
D O
N
3.2
3.2
3.2
3.2
3.2
0
3.2
3.2
3.2
3.2
3.2
3.2
3.2
00 3.2
3.2
3.2 3.2
3.2
3.2
BA
TTE
RY
BA
CK
UP
3.2
CP1
BOAR
D - M
CU, 2
of 6
and
ST2
BOAR
D - S
TRO
BE P
OSI
TIO
NP2
64_0
011F
C_
SERVICE MANUAL
90 11NOV05 – SM7648-1
CP1 BOARD - MCU, 3 of 6
TC
A
A_G
ND
S_G
ND
MA728D7501
A_G
ND
A_G
ND
A_G
ND
A_G
ND
T5V
(A)
T5V
(A)
A_G
ND
T5V
(A)
A_G
ND
A_G
ND
A_G
ND
A_G
ND
A_G
ND
A_G
ND
A_G
ND
A_G
ND
T5V
(A)
T5V
(A)
A_G
ND
A_G
ND
A_G
ND
T5V
(A)
A_G
ND
A_G
ND
AN
5
AN
1
T5V
(A)
T5V
(A)
A_G
ND
A_G
ND
PB
0
PB
1
PB
2
A_G
NDA_
GN
D
5.25
V(T
)T
5V(A
)
PW
X1
PW
X0
AN
4
AN
0
A_G
ND
A_G
ND
T5V
(A)
A_G
ND
A_G
ND
A_G
ND
A_G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
S-G
ND
A_G
ND
AN
5
AN
4
AN
1
AN
0
A_G
ND
5.25
V(T
)
PW
X0
PW
X1
GN
D
A_G
ND
A_G
ND
PB
6
PB
2
PB
1
PB
0
VD
D3
A_G
ND
A_G
ND
A_G
ND
R7264680;1/16D
R7267
680;1/16D
S-G
ND
5.25
V(T
)
4700P;B0603
C7217
4700P;B0603
C7218
4.7K;1/16J
R7010
4.7K;1/16JR7012
4.7K;1/16JR7013
4.7K;1/16JR7015
4.7K;1/16JR7017
R72
3324
0K;1
/16D
4700P;B0603 C7000
3300P;BC7211
3300P;BC7212
3300
P;B
C75
103300
P;B
C75
11
1500
P;B
C72
13
1500
P;B
C72
14
TSH
T
TTX
D
TCLK
TRX
D
TSTB
R72
5012
K;1
/20D
0603
R72
51 12K
;1/2
0D0603
R72
5212
K;1
/20D
0603
R72
5312
K;1
/20D
0603
3.3K;1/20D
0603
R7266
3.3K;1/20D0603
R7247R724668K;1/20D
0603
R726568K;1/20D
0603
R72
3224
0K;1
/16D
820K
;1/1
6JR
7218
R72
1924
K;1
/20D
0603 R72
1310
0K;1
/20D
0603
R72
0951
K;1
/20D
0603
100K
;1/2
0DR
7207
0603
R72
3118
K;1
/20D
0603
R72
2124
K;1
/20D
0603
R72
2382
0K;1
/16J
R72
1210
0K;1
/20D 06
03R
7208
51K
;1/2
0D
0603
100K
;1/2
0DR
7206
10K;1/20JR7201
0603
R7508470K;1/20J
0603
R75
1068
K;1
/20D
0603
R75
0568
K;1
/20D
0603
4.7K
;1/2
0J
0603
R70
20
4.7K
;1/2
0J
0603
R70
21
4.7K
;1/2
0J
0603
R70
19
4.7K
;1/2
0J
0603
R70
22
3.3K;1/16J R7008
1K;1/20J0603
R7004
3.3K;1/16J
R7009
1K;1
/20J
R70
01
R72
2918
K;1
/20D
R7503470K;1/20J
0603
5.25
V(T
)5.
25V
(T)
33K
;1/2
0J06
03R
7023
33K
;1/2
0J
0603
R70
24
33K
;1/2
0J
0603
R70
25
33K
;1/2
0J
0603
R70
26
33K;1/20J0603 R7018
33K;1/20J0603 R7014
33K;1/20J0603 R7016
33K;1/20J0603
R7011
33K;1/20J
0603
R7007
33K;1/20J
0603
R7006
FB
MH
1608
HM
102
1608
L700
2
FB
MH
1608
HM
102
1608
L700
1
4.7;B
2125
C7020
4.7;B
2125
C7508
4.7;B
2125
C7507
4.7;B
2125C7509
4.7;B
2125
C7200
4.7;B
2125
C7202
C75064.7;B
1608
C75054.7;B
1608
4.7;B
1608
C7209
4.7;B1608
C7204
4.7;B
1608
C7203
BK
1005
HM
102
L720
1
FB
MH
1608
HM
102
1608
L720
0
A_G
ND
VD
D3
VD
D3
1AV
4J11
SL1
32G
CN
701
4.7;B
2125
C7017
4.7;B
2125
C7016
4.7;B1608C7205
TOK
TC
7WU
04F
UIC
726
QT
C7W
U04
FU
--K
TC
74M
H24
4FK
QT
C7M
H24
4FK
-P
IC73
1
TC7W66FKIC754
QTC7W66FK---P
NJM12904RIC723
QNJM12904R--G
NJM12904R
IC725
QNJM12904R--G
NJM12904RIC728
QNJM12904R--G
10P;CHC7004
10P;CHC7005
M62
354A
GP
QM
6235
4AG
P--
P
IC73
0
IC701
QPST3646R---GPST3646RL
IC70
2
QX
XA
GF
34A
001N
HD
64F
2134
A
R75
0962
K;1
/16D
1608
R75
0462
K;1
/16D
1608
TC
7SE
T08
FU
QT
C7S
ET
08F
U-P
IC70
3
0;1/
20Z
0603
R70
34
R75
1810
0;1/
20J
0603
R75
2010
0;1/
20J
0603
R75
1920
0;1/
16J
R75
2120
0;1/
16J
1K;1/16DR7502
1K;1/16DR7507
1K;1/20J
0603
R7214
1K;1
/20J
0603
R72
00
1K;1
/20J
0603
R72
02
1K;1
/20J
0603
R72
03
1K;1
/20J
0603
R72
04
1K;1
/20J
0603
R72
05
1K;1/20J0603
R7215
1K;1
/20J
R75
06
1K;1
/20J
0603
R75
11
1K;1/20J
0603
R7513
1K;1/20J
0603R7515
2.2K;1/16DR7514
2.2K;1/16DR7516
1;BC7001
0.1;BC7003
0.1;
BC
7006
0.1;
BC
7007
0.1;
BC
7008
0.1;
BC
7009
0.1;
BC
7010
0.1;
BC
7011
0.1;BC7012
0.1;BC7015
0.1;BC7013
0.1;BC7201
0.1;B
C7206
0.1;BC7207
0.1;BC7208
0.1;BC7210
0.1;BC7221
0.1;BC7222
0.1;BC7228
0.1;BC7230
0.1;BC7233
0.1;BC7512
0.1;BC7513
0.1;
BC
7514
4.7;
BC
7515
1608
4.7;
BC
7516
1608
4.7;B
2125
C7014
1;B
1608
C7234
ST
AB
ON
EN
C-0
3MA
-R1A
V4V
14B
0070
G
IC75
1
EN
C-0
3MB
-R1A
V4V
14B
0080
G
IC75
2
10K;1/20J
0603R7517
R726910K;1/20J
FB
MH
1608
HM
102
1608
L750
1
DT
A14
4EM
Q75
02
19.6
6080
MH
zX
7001
270;1/20J
0603
R7005
A_G
ND
A_G
ND
T5V
(A)
PB
6
A_G
ND
0.1;
B
C72
29
0.1;
B
C72
31
A_G
ND
A_G
ND
10K;1/20J0603
R7268
UN
R32
A3
Q72
00
A_G
ND
T5V
(A)
T5V
(A)
R72
5747
0K;1
/16D
0.04
7;B
C72
32
R7256470K;1/16D
0.047;BC7227
R72
2468
K;1
/20D
0603
R72
2568
K;1
/20D
0603
18K;1/16DR7210
R72
36
180K
;1/1
6D
R72
2668
K;1
/20D
0603
R72
27
68K
;1/2
0D06
03
R72
3818
0K;1
/16D
18K;1/16DR7211
R72
5575
K;1
/16D
R725475K;1/16D
680P;B
1608
C7220
680P;B1608
C7219
AD8542ARMZIC753
QAD8542ARMZ-P
AD8542ARMZIC722
QAD8542ARMZ-P
AD8542ARMZIC729
QAD8542ARMZ-P
AD8542ARMZIC724
QAD8542ARMZ-P
BA5962FVMQBA5962FVM--J
IC732BA5962FVMQBA5962FVM--J
IC733
NJU7043RB1IC721
QNJU7043RB1-G
R7234100K;1/16D
R7235100K;1/16D
R724168K;1/20D
0603
R724068K;1/20D
0603
18K
;1/2
0D
0603
R72
44
47K
;1/2
0D
0603
R72
42
0.04
7;B
C72
23 0.04
7;B
C72
24
47K
;1/2
0D
0603
R72
43
18K
;1/2
0D06
03
R72
45
0.1;
BC
7216
0.1;
BC
7215
5.6K
;1/2
0DR
7228
5.6K
;1/2
0D
0603
R72
30
10P
DR
IVE
A
4Y
HA
LL IN
-
11P
DR
IVE
B
5P
HA
LL IN
+
12Y
DR
IVE
A
6P
HA
LL O
UT-
13Y
DR
IVE
B
7P
HA
LL O
UT+
8P
HA
LL IN
-9
GN
D
1Y
HA
LL IN
+2
Y H
ALL
OU
T+3
Y H
ALL
OU
T-
Z1Z2
1 2 3 45678
11G
21A
1
32Y
4
41A
2
52Y
3
61A
3
72Y
2
81A
4
92Y
1
10GN
D11
2A1
121Y
4
132A
2
141Y
3
152A
3
161Y
2
172A
4
181Y
1
192G
20VC
C
1234 5
678
1234 5
678
1234 5
678
1234 5
678
1D0
2LD
3CL
K
4DI
5A0
1
6A0
2
7NC
8GN
D9
VSS
10NC
11A0
3
12A0
4
13A0
5
14A0
6
15VD
D
16VC
C
1GND
2OUT
3 CD
4 VDD
1RES
2XTAL
3EXTAL
4MD1
5MD0
6NMI
7STBY
8VCC2(VCL)
9P52
10
P51
11
P50
12
VSS
13
P97
14
P96
15
P95
16
P94
17
P93
18
P92
19
P91
20
P90
21P6
0
22P6
1
23P6
2
24P6
3
25P6
4
26P6
5
27P6
6
28P6
7
29AV
CC
30P7
0
31P7
1
32P7
2
33P7
3
34P7
4
35P7
5
36P7
6
37P7
7
38AV
SS
39P4
0
40P4
1
41
P42
42
P43
43
P44
44
P45
45
P46
46
P47
47
VCC1
48
P27
49
P26
50
P25
51
P24
52
P23
53
P22
54P21
55
P20
56
VSS
57
P17
58
P16
59
P15
60
P14
61P1
3
62P1
2
63P1
1
64P1
0
65P3
0
66P3
1
67P3
2
68P3
3
69P3
4
70P3
5
71P3
6
72P3
7
73VS
S
74P8
0
75P8
1
76P8
2
77P8
3
78P8
4
79P8
5
80P8
6
1 2 345
1Vr
ef
2GN
D
4OU
T
3VC
C
1Vr
ef
2GN
D
4OU
T
3VC
C
1 234
12345
678
1234 5
678
1234 5
678
1234 5
678
1 STBY
2 BIAS
3 IN1
4 IN2 5GND
6OUT-
7OUT+
8Vcc1 STBY
2 BIAS
3 IN1
4 IN2 5GND
6OUT-
7OUT+
8Vcc
1234 5
678
5.25
V(T
)
VD
D3
F1-
0230
0/S
X82
3-W
KO
TO IC
702
TO IC
702
TO IC
702
CL7
16
TO L
EN
SD
/A C
TO D
MA
(MA
IN)
AMP AMP
TO IC
702
AN
D
BU
FF
ER
16bi
t CP
U
RESET
GY
RO
V
GY
RO
H
VOLT
AG
E: V
IEW
MO
DE,
LC
D O
N
5.0
5.0
5.0
5.0
5.0
5.0
0.1
3.0
0.0
0.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.2
5.2
5.0
CP1
BOAR
D - M
CU3
of 6
P264
_001
2FC_
Diag
rams
SM
7648-1 – 11NO
V05
91
CP
1 BO
AR
D - M
CU
, 4 of 6
VFA
50V
10V
10V
10V
LCDD4
LCDD3
LCDD2
LCDD1
LCDD0
EVFEN
EVFSD
EVFCK
LCDD5
LCDD6
LCDD7
VDD3
10;B
1608
C80
0110
;B
1608
C80
02
1;BC8005
10K;1/20D
0603
R8007
EVFHD
EVFVD
EVFSLEEP
0.47;BCB801
0.47;BCB802
0.47;BCB803
4.7;B
2125
C8009
4.7;B
2125
C8010
4.7;B
2125
C8011
3.6V(E)
R800410K;1/20D
0603
1AV4J11SL203GCN801
EVFSLEEPEVFSLEEP
RB
521S
-30
D80
03R
B52
1S-3
0
D80
02
RB
521S
-30
D80
01
KCD-A210-BA-TP
LCD DRIVER
QKCD-A210-BAJ
IC801
R80092.2;1/20J
0603
R80102.2;1/20J
0603
E3V
E3.6V
E3.6V
E-5V
E3V
E3V
E3.6V
E3.6V
E-5V
10P;CHC8008
0.1;
B06
03C
8004
0.1;
B
0603
C80
12
0.1;B
0603C8013
2.2;B1608
C8007
LMCLK
R800547K;1/20D
0603R8006
300K;1/16D
R80
0247
;1/1
6D
1 2
3 4
1 2
3 4
1 2
3 4
10 DWN
4 VSS
11 INV
5 VDD
12 VS
6 CK1
13 HS
7 CK0
14 VIDBL
8 SLEEP
15 VIDGL
9 RGT
16 VIDRL17 VIDBH18 VIDGH19 VIDRH20 VEE
1 VEE2 TOUT23 TOUT1
Z1 Z2
C3 SCLK_3W
C2 SDAT_3W
B1 LD_3W
D2 SI_SEL
C1 SDA
D3 SCL
D1 ResetB
E2 DIN0
E1 DIN1
F2 DIN2
F1 DIN3
G1 DIN4
E3DI
N5
F3DI
N6
G2DI
N7
F4DV
ALID
G3HS
_IN
E4VS
_IN
G4CL
K_IN
F5VD
D
G5VS
S
F6VD
D_IO
G6QP
2_FB
REF
G7QP
2_IS
INK
E5QP2_PRE
E6QP2_CLK
F7VDDA_QP
D6VSSA_QP
E7QP1_REF0
D5QP1_CLKB
D7QP1_CLKA
C6QP1_FB5
C7VRT
B6VRB
B7VDDA_DAC
A7
VSSA_DAC
C5RO
UT
B5GO
UT
A6BO
UT
B4VD
D_DI
S
A5DI
S_CK
0
C4DI
S_CK
1
A4DI
S_HS
B3DI
S_VS
A3DI
S_IN
V
B2DI
S_DW
N
A2DI
S_RG
T
A1TC
LK
D4NC
VDD3
3.6V(E)
E3V
E3V
E3.6V
Z1-02300/SX823-WKO
TO DMA(MAIN)
TO DMA(MAIN)
TO DMA(MAIN)
TO EVF
CP1 BOARD - MCU4 of 6
VOLTAGE: VIEW MODE, EVF ON
3.62
-4.96
-4.96
P264_0013FC_
SERVICE MANUAL
92 11NOV05 – SM7648-1
CP1 BOARD - MCU, 5 of 6P
WA
BA
T_T
BA
T+
BA
T-
DC
+
DC
-
22;B
2125
C5015
22;B
2125
C50012A
32V
F47
K2R
0C3L
FN
D
1608
F50
05
2A32VF47K2R0C3LFND
1608
F5002
2A32
VF
47K
2R0C
3LF
ND
1608
F50
03
XC9104D095MRQXC9104D095MP
IC531
M-G
ND
M-G
ND
M-G
ND
M-G
ND
M-G
ND
M-G
ND
L500
410
;M1A
V4L
2MH
100M
G
3.0X
3.0
VR
501
10K
IC50
1Q
MA
X15
66E
TL-P
MA
X15
66E
TL+T
10;M
L500
61A
V4L
2JQ
100M
G
3.8X
3.8
10;M
L500
51A
V4L
2FH
100M
G
5.0X
5.0
10;M
L500
9
1AV
4L2J
Q10
0MG
3.8X
3.8
US5U2Q5008
D53
01S
D83
3-04
4.7;B
1608C5035
CL5
03
CL5
04
CL5
05
UN
RE
G(S
T)
BO
OS
T5.
25V
UN
RE
G(S
Y)
PO
N
US5U2Q5007
10;M
1AV
4L2W
C10
0MG
3.4X
3.4
L500
7
2.2;B
1608
C5020
LCD
ON
+15V
(L)
VD
D3
LCD
ON
2
+3.4
5V(A
)
+5V
(L)
MA2Z720-00LD5005
LCD
BL
AS
PA
ON
33;6
.3-V
C50
13
10;M
1AV
4L2J
X10
0MG
5.0X
5.0
L530
1
MA
2Z72
0-00
L
D50
04
MT
M23
1230
LQ
5002SD
833-
04D
5001
SD
833-
04D
5002
DA
N22
2D
5003
4.7K;1/20J
0603
R5006 4.7K;1/20J
0603
R5007
CA
MP
WR
BA
TT
+
MT
M23
1230
LQ
5003
1;BC5304
MT
M23
1230
LQ
5303
5.25
V(T
)
RS
R02
5N03
Q50
06
UP
0339
7Q
5011
DAN217UD5007
CU
S01
-TE
85L-
QD
5006
220P;B0603
C5027
4.7;B
3216
C5029
47;M
1AV
4L2F
M47
0MG
2125
L501
0
27K;1/20D0603
R5025
2.4K
;1/2
0D06
03
R50
28
1AV
4J10
UC
023G
CN
501
DA
N22
2D
5008
EM
D2
Q50
0522
0P;C
HC
5010
SS
M3K
03T
E-T
E85
LT
SS
M3K
03T
E--
P
Q50
16
EV
FB
L
TK70634HCL-GQTK70634HC-GG
IC502
1;BC5034
3.6V
(E)
EV
FO
N
UP
0339
7Q
5018
UP
0339
7Q
5013
UP
0339
7Q
5012
UP
0339
7Q
5010
FD
C63
3N-N
FQ
5301
470K;1/20D
0603
R5301 150K;1/20D0603
R5302
R53
0327
0K;1
/20D
0603
10K
;1/2
0JR
5306
27K;1/20DR5020
56;1
/20D
R50
24
2.4K
;1/2
0DR
5022
68K
;1/2
0DR
5004
68K
;1/2
0D06
03
R50
12
100K;1/20D
R5010
39K;1/20D0603
R5005
51K;1/20D
0603
R5009
39K;1/20D0603
R5011
24K
;1/2
0DR
5013
27K;1/20D0603
R5016
12K;1/20D0603
R5015
7.5K
;1/2
0D06
03
R50
14
10K;1/20DR5034
39K
;1/2
0D
0603
R50
30
3300P;BC5007
3300
P;B
0603
C50
12
3300
P;B
C50
02
4700P;B0603
C5009
4700P;B0603
C5004
220P
;BC
5025
10;M
1AV
4L2J
Q10
0MG 3.8X
3.8
L500
8
2.2;B
1608
C5022
330K;1/20D0603
R5305
9.1K
;1/2
0D
0603
R50
17
DC
IN
AC
PR
330K;1/20D0603
R5042
120K;1/20D0603
R5002
21A
V4J
10U
C02
3GC
N50
2
CL5
01
CL5
02
VR
ON
+15.
2V(A
)
-7.7
V(A
)
+1.2
5V(D
)
DT
C12
3EM
Q50
20
DT
C12
3EM
Q50
19
510K;1/20D0603
R5027
510K;1/20D0603
R5041
MA
2S11
1D
5009
4.7K
;1/2
0D
0603
R50
21
10K;1/20D0603
R5023
C5011220P;CH
0.03
3;B
1608
C50
18
0.033;B1608
C5019
1;B
1608
C5021
4.7;B
2125
C5030
22P;CHC5303
UN
R32
A3
Q50
01
UN
R32
A3
Q53
02
620;
1/20
D
0603
R50
18
18;1
/20D
0603
R50
32
REG3.6V
TK11136CSCL-GQTK11136CS-GG
IC503
C530233;8-V
3.5X2.8
2SC
4617
-RQ
5009
4.7K
;1/2
0JR
5046
4.7K
;1/2
0J
R50
47
3300P;BC5006 0.
1;B
0603
C50
43
100K;1/20D0603
R5045
1;B1608
C5032
56K;1/16DR5001
6.8K
;1/1
6DR
5304
1;B
1608
C5301
1;B
1608
C5023
0.1;B
0603C5008
0.1;
BC
5031
0.1;
BC
5033
10;B
2125
C50
03
10;B2125
C5014
10;B
2125
C5016
AS
PA
ON
3A
1;BC5305
47;1/20D0603
R5035
47;1/20D0603
R5036
18;1
/16D
R50
37
SI3
473D
V
TS
I347
3DV
-E3P
Q50
04
5A32
V
F47
K5R
0C3L
FN
D
F50
01
100L5003
1AV4L26B3450G
220;
1/16
J
1608
R50
48
27K;1/20D
0603
R5040
47K
;1/2
0J06
03
R53
072S
K35
41Q
5304
0;1/
20Z
0603
R50
31
330K;1/20D
0603
R5008
5A32
V
F47
K5R
0C3L
FN
D16
08
F50
04
12
1 2
12
1
FB
2 VDD
3
CE
4GND
5EXT
1FB
3H
2CC
1
3FB
1
4ON
1
5PG
SD
6LX
SD
7PV
SD
8ON
SD
9FB
SD
10CC
SD
11
SUSD
12
CCM
13
FBM
14
ONM
15
REF
16
CCSU
17
FBSU
18
ONSU
19
SCF
20
AUX10K
21SD
OK
22OS
C
23PG
SU
24LX
SU
25PV
SU
26PG
M
27LX
M
28PV
M
29ON
2
30CC
2
31
FB2
32
INDL2
33
GND
34
DL2
35
DL3
36
DL1
37
PV
38
CC3
39
FB3L
40
ON3
Z1
12
345
1234
5
1
2 3
1234 5
12
3
1LC
DA
N2
LCD
CA
Z1Z2
1
23
1234 5 6
1VCOUNT
2GND
3NP
4 VOUT
5 GND
6 VIN
1234 5
1234 5
1234 5
1234 5
1 2 3456
1E
VFA
N2
EV
FCA
Z1Z2
1234
5
1 2 3456
12
12
+5V
(L)
+15V
(L)
BO
OS
T5.
25V
+15.
2V(A
)
LCD
AN
+3.4
5V(A
)
LCD
ON
2
5.25
V(T
)
LCD
ON
UN
RE
G(S
T)
UN
RE
G(S
Y)
+1.2
5V(D
)+1
.25V
(D)
VD
D3
ACPR
AS
PA
ON
VR
ON
-7.7
V(A
)
DCIN
EV
FA
N
EV
FC
A
PO
N
BA
TTE
MP
SW
ITC
HIN
G C
ON
TRO
L
0.79
1.55
1.25
3.25
1.35
4.54
3.25
1.25
1.44
1.56
1.25
2.40
1.25
1.13
1.25
3.25
1.25
0.85
1.33
1.80
1.49
0.20
2.81
0.704.56
5.00
5.00
3.383.
25
1.30
1.25
0.20
! !
!
!
TO T
B3
TO D
MA(
MAI
N)
TO B
ATTE
RY
TO D
MA(
MAI
N)
TO D
MA
(MA
IN)
TO L
CD
TO E
VF
!
P1-
0230
0/S
X82
3-W
KO
VO
LTA
GE
: VIE
W M
OD
E, L
CD
ON
DD
CO
NV
RE
G
CP1
BOAR
D - M
CU5
of 6
P26
4_00
14F
C_
Diagrams
SM7648-1 – 11NOV05 93
CP1 BOARD - MCU, 6 of 6 and ST1 BOARD - CAPACITOR
XAN
ST
RO
BO
UN
IT
FLA
SH
RE
FLE
CT
OR
TRG
XKT
2
31
1AV
4L17
B03
70N
CL5
82
CL5
81
C54
12C
5414
140;
300-
E14
0;30
0-E
(GY
)
(GY
)1A
G0W
31B
6510
4(WT)
1AG
0W31
B65
105
1AG
0W31
B65
001
ED0335
1SS400D5407
100K;1/8J-X
3216R5401
CP
H31
10-E
Q54
02
W03
-102
1AV
4L17
B03
00G
T54
01
4.7K;1/16J
1005R5414
1K;1
/20J
R54
10
1K;1/20J
R5408
1;B
1005
C5411
2SK
3541
Q54
01
CL5
42
CY
25B
AH
-8F
-T13
_F10
Q54
09
1000P;B
1005C5406
RB521S-30D5404
FPSN4D5405
VD
D3
CL5
44
2SC
4617
-RQ
5403
VM
ON
IT
91K;1/20DR5406
33;10-VC5413
CL5
41
10K;1/20J
R5407
470;1/16J1005 R5416
FZ0310D5401
0.01
;630
H
3216
C54
03
470;1/16J1005 R5415
470;1/16J1005 R5419
FLC
TR
L
RR
264M
-400
TR
D54
03
1;B
1005
C5405
10M;1/8F-X
RGXAVE106FCAP2125
R5405
100K;1/8J-X
3216
R5403
10K;1/20JR5418
10K;1/16J
1005
R5424
470;
1/16
J
1005
R54
11
CL5
43
CL5
45
290
CH
GS
EL
CPH5504-EQ5405
6800P;B
1005
C5409
0.1;B1005C5401
470;1/16J1005 R5417
10K;1/20JR5420
CL5
46
220K;1/8J-X3216
R5404
+15.
2V(A
)
2SC
4617
-RQ
5406
470;
1/16
J10
05
R54
13
UN
RE
G(S
T)
10K;1/20JR5409
CH
G1000P;B
1005
C5404
0.03
3;35
0H3.
3X1.
6
C54
02
470;
1/16
J10
05
R54
12
DAN222D5406
CR
F02
-TE
85L,
QD
5402
RD
3CY
D08
CM
EQ
RD
3CY
D08
CM
-P
IC54
1
11K;1/16D
R5402
1;B
1608
C5407
0.1;
B
1608
C54
08
EM
D3
Q54
04
1K;1
/20J
0603
R54
25
470;
1/16
J
1005
R54
22
470;
1/20
JR
5426
470;
1/20
JR
5421
12 3 456
1234 5
678
1
2 345
1
23
1234 5
1234 5 6
+15.
2V(A
)
FLC
TR
L
VD
D3
CH
GS
EL
VM
ON
IT
ST
A
ST
1S
1-02
300/
SX
823-
WK
O
3.2
VO
LTA
GE
: VIE
W M
OD
E, A
FTE
R C
HA
RG
E
S4-
0230
0/S
X82
3-W
KO
TO
DM
A(M
AIN
)
CP1
BOAR
D - M
CU, 6
of 6
and
ST1
BOAR
D - C
APAC
ITO
R
TO
PW
A
P264
_001
5FC_
SERVICE MANUAL
94 11NOV05 – SM7648-1
CA1 BOARD - CCD
DV
D1
AV
D1
AV
S1
XS
U8N
XS
G9N
XV
2N
XS
G7N
XV
5N
XV
3N
XS
G3N
XV
1N
XS
G1N
XV
4N
XV
9N
XS
G5N
XV
7N
XSG
10N
XV6N
XSG8N
XV14N
XSG6N
XV13N
XV12N
XSG4N
XV11N
XSG2N
XV8N
XV10N
AVS2
AVD2
DVD2
V2
NC
NC
VL2
V7A
V5A
VH2
VM2
V3A
V1A
SUB
NCV4
V9
V3B V1BV6
V8
VH
1
VL1 NV NC
NC
NC
NC
VM
1
V5B V10
V7B
NC
NC
NC
NC
CX
D34
43G
AQ
CX
D34
43G
A--
P
IC90
1
HD
4935
3NP
QH
D49
353N
P--
P
IC90
6
QICX495AQF-CN
IC903
RE
G3.
0V
TK
1113
0CS
CL
QT
K11
130C
S--
J
IC90
4
FB
MH
1608
HM
601
1608
L900
1
MA727
D9002
1;B
C9006
1;B C9070
1;B C9071
1;BC9007
1;BCB901
0.1;B
2125
C9028
0.1;B
2125
C9003
0.01
;B
1608
C90
67
0.15
;B
1608
C90
61
0;1/
16Z
R90
10
820;1/16JR9007
3.9;
1/16
J
R90
11
100K;1/16JR9021
1M;1/16JR9022
3.3K;1/16JR9001
82K;1/16J
R9002
2.7K
;1/1
6JR
9004
3.3K
;1/1
6J
R90
06
10K
;1/1
6JR
9003
10K
;1/1
6JR
9005
1M;1
/16J
R90
6847
;1/1
6JR
9063
47;1
/16J
R90
61
100RB901
100RB902
2SC
5661
Q90
01
3.3;B2125
C9002
EM
X1
Q90
02
0.1:SL3216
C9062
4.7;B3216
H=0.95
C9001
0;1/
16Z
R90
09
22;10-T
3.5X2.8H=1.2
C9068
CN
901
1AV
4J11
VE
510G
0.1;
B
1608
C90
25
0.1;
B16
08
C90
26
0.1;B C9063
0.1;B
C9065
0.01
;B
C90
66
1000
P;B
C90
72
MA142K
D9001
0.01;BC9064
0.1;
BC
B90
2
0.1;BCB903
0;1/
16Z
R90
24
0;1/16ZR9015
0;1/16ZR9018
0;1/
16Z
R90
73
10;B
2125C9073
1;B
1608
C90
27
1;B
1608C9008
1;B
1608
C9009
0;1/
16Z
R90
13
27K;1/20J
0603 R9062
22;10-T3.5X2.8
C9074
BK
1005
LL10
0L9
002
BK
1005
LL10
0L9
003
BK
1005
LL10
0L9
004
BK
1005
LL10
0L9
005
100RB903
100RB904
75P;CHC9075
75P;CHC9076
75P;CHC9077
75P;CHC9078
3.3;
1/16
JR
9069
3.3;
1/16
JR
9070
3.3;
1/16
JR
9071
3.3;
1/16
JR
9072
C1 L2 L3 B1 D1 D2 E1 E2 F1 F2 G10 F11 F10 E11 E10 D11
K9
K11
J11
J10
H11
H10
G2
H1
H2
J1
J2
K1
B11
C11
L10
G1
L6L8L9G11K3L7L5L4B3A3B5A7B7B9C10A9
B8
A8
B6
A5
B4
A2
C2
A10
A6
A4
K4
K5
K6
K7
K8
D10
Z1
Z2Z3
Z4
1D4
2D5
3D6
4D7
5D8
6D9
7DVdd12
8DLLC
9DVss2
10H1
A
11H2
A
12H1
B
13H2
B
14DV
ss3
15DV
dd3
16RG
17CL
K_in
18HD
_in
19
VD_in
20
AVss1
21CDS_in
22FBC
23
SHC
24
Bias
25
AVdd12
26
VRT
27
VRB
28AV
ss2
29CS
30Sd
ata
31SC
K
32D0
/MON
33D1
34D2
35D3
36DV
ss1
Z1Z2
Z3Z4
12345678910
11
12
13
14 15
16
17
18
19
20
21
22
23
24
25
26
27
28
1 2 345
1
23
12
34
12
34
56
78
12
34
56
78
1 2 3456
10C
CD
EN
4-7
.7V
(A)
11C
CD
SD
5TG
VD
12C
CD
CK
6TG
HD
13AD
0
7G
ND
14AD
1
8A
DC
K
15AD
2
9G
ND
16AD
317
AD4
18AD
519
AD6
20AD
7
1G
ND
2G
ND
3+1
5.2V
(A)
21AD
822
AD9
23A
D10
24A
D11
25X
SU
B26
XS
G1C
27X
SG
3B28
XS
G2A
29X
SG
1B30
XV6
31XV
H32
XVS
33XV
734
XS
G2C
35XV
536
XS
G2B
37XV
338
XS
G3A
39XV
140
XS
G1A
41XV
842
XV2
43XV
444
SU
BG
T45
SU
BG
T246
AS
PA
ON
347
+3.2
5(D
)48
+3.4
5(A
)49
AS
PA
ON
450
GN
D51
GN
DZ1Z2
1
23
12
34
12
34
12
34
12
34
AD
0
AD
1
AD
2
AD
3
AD
4
AD
5
AD
6
AD
7
AD
8
AD
9
AD
10
AD
11
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
AD8
AD9
AD10
AD11
XS
G1A
XS
G1B
XS
G1C
XS
G2A
XS
G2B
XS
G2C
XS
G3A
XS
G3B
XV
H
XV
S
XV
5
XV
2
XV
3
XV
4
XV
1
XV
6
XV
7
XV
8
XS
UB
XS
UB
XV
H
XS
G3B
XV
7
XS
G1B
XV
5
XV
3
XS
G3A
XV
1
XS
G1A
XV
4
XV
2
XVS
XSG2C
XV7
XSG2B
XV5
XV3
XSG1C
XV1
XSG2A
XV8
XV6
VHLD
V7A
V5A
V3A
V1A
V4
V2
VS
T
V7B
V5B
V3B
V1B V
8
V6
V8
V7B
V7A
V6
VHLD
V5B
V5A
V4
VST
V3B
V3A
V2
V1B
V1A
CD
S, A
GC
, A/D
CH
. DR
IVE
R
V. D
RIV
ER
CCD
-0.47
-0.47
-0.35
1.29
2.22
11.5
11.4
-7.66
-0.35
-0.35
-0.35
-0.35
0.0
0.0
-6.3
-7.41
-0.35
-6.52
-6.53
-6.65
1.31
2.19
13.24
15.3
11.98
3.28
3.26
3.02
3.27
0.0
0.0
3.013.
26
1.64
1.36
2.33
1.33
2.320.
5
3.37
3.01
1.06
0.9
1.06
1.23
1.92
1.94
1.92
3.27
C1-
0230
0/S
X82
3-W
KO
VO
LTA
GE
: VIE
W M
OD
E, L
CD
ON
CA
1
TO C
P1(
DM
A)C
N10
1
CA1
BO
ARD
- CCD
ICX495AQF
P264
_001
6FC_
Diag
rams
SM
7648-1 – 11NO
V05
95
ST
3 BO
AR
D - H
OT
SH
OE
ST
RO
BE
ST3GND
UMD3NQ5601
100;1/16J
1005
R5601
100;
1/16
J
1005
R56
02
0.15
;B
1608
C56
01
CL561
FBMH1608HM4701AV4L3DU470PG
1608L5601
FBMH1608HM4701AV4L3DU470PG
1608
L5602
FBMH1608HM470
1AV4L3DU470PG1608
L5603
CN5611AV4J10UC064G
DAN222
DDDAN222----PD5601
D5603CR08AS-12DTXAGS12-G02P
UMZ6.8END5602
CN562
1234
56
4CAFLCE5CAFLCLK6CAFLDT
1VDD32X3GND
Z1Z2
1
2 3
K
A
G
1
3 4
52
4 CAFLCLEHOT SHOE
1 X2 CAFLCLK3 CAFLDT
TO CP1(DMA)CN193
S3-02300/SX823-WKO
ST3 BOARD - HOTSHOE STROBEP264_0017FC_
SERVICE MANUAL
96 11NOV05 – SM7648-1
TB1 BOARD - SHUTTER AND MODE DIAL and TB4 BOARD - BATTERY SENSOR
TB
1
SO
4
SI5
E
SO
4
SI5
E
1st
2nd
SKRNPBE010S6001
SI0
A
SI0
B
SI2
B
SI4
A
SI4
B
SI3
A
SI3
B
SI5
A
SI5
B
MO
DE
SW
_AD
SI2B
SI3B
SI5B
SI4B
MO
DE
SW
_AD
1SS
400
D60
05
EV
QP
QH
B55
S60
07
GN
D
GN
D
GN
D
SLL
B22
0100
1AV
4S10
B73
20G
S60
02
SI0
AS
I0B
SI3
A
EV
QP
QH
B55
S60
08S
I4A
EV
QP
QH
B55
S60
09S
I5A
1AV4
J11V
E190
GC
N60
1
TO C
P1(
SY
A)C
N30
1
0;1/
16Z
R60
13
D60
04S
ML-
A12
MT
SR
M-1
011S
T
1AV
4S10
B73
30G
S60
03
7.5K;1/16JR6011
16K;1/16JR6009
24K;1/16JR6008
39K;1/16JR6007
82K;1/16JR6006
470;1/16JR6005
1.6K;1/16JR6004
3K;1/16JR6003
5.1K;1/16JR6002
DA
P22
2D
6001
1000P;BC6001
HN
1D01
FED
6002
HN
1D01
FED
6003
SW
1AB
-260
-10T
281A
V4S
10B
4101
G
S60
05S
W1A
B-2
60-1
0T28
1AV
4S10
B41
01G
S60
06
XR
E09
2_IB
N12
3PC
ES
6004
11K;1/16JR6010
1
2
3
4
5 6
12
34
5
678 9
Z1
10M
OD
E SW
_AD
4C
MD
IN 2
11SC
AN O
UT
4
5C
MD
IN 1
12SC
AN IN
5
6BO
OST
5.25
V
13SC
AN IN
4
7AL
WAY
S3.2
V
14SC
AN O
UT
0
8PW
LED
15SC
AN IN
3
9S2
16SC
AN IN
217
S1
1G
ND
2G
ND
3G
ND
18SC
AN IN
0
Z1Z2
19SC
AN O
UT
11
2 3 4 5
6
78910
1112
Z1 Z2Z3Z4
12 3 456
1 2 3
4561 2 3
1234
1234
1C
OM
2C
MD
_A
3C
MD
_BZ2Z1
ES
E13
V01
DS
6901
Z1Z2
12
TB
4
BA
T S
W
SH
UTT
ER
MO
DE
SW
WID
E1 W
IDE
2
TELE
2
TELE
1
PR
OG
EX
PP
RO
G R
AM
PR
OG
DR
IVE
PW
SW
FAV
OR
ITE
CM
D D
IAL
T1-0
2300
/SX
823-
WK
O
T4-0
2300
/SX
823-
WK
O
TB1
BOAR
D - S
HUTT
ER A
ND M
ODE
DIA
Lan
d TB
4 BO
ARD
- BAT
TERY
SEN
SOR
POW
ER L
ED
P264
_001
8FC_
Diagrams
SM7648-1 – 11NOV05 97
TB2 BOARD - FOCUS AND STROBE MODE
TB2EVQPQHB55
1AV4S10B2591GS6501
EVQPQHB55
1AV4S10B2591GS6503
HN1D01FED6501
EVQP7J01KS6502
4561
23
SCAN OUT 4
SCAN OUT 5
SCAM IN 0
SCAN IN 1
FOCUS
LCD/EVF
CP1(SYA)CN303
FLASH
T2-02300/SX823-WKO
TB2 BOARD - FOCUS ANDSTROBE MODE
264_0019EC_
SERVICE MANUAL
98 11NOV05 – SM7648-1
TB3 BOARD - AC ADAPTER/USB CONNECTOR
TB3
DC-
DC+
FBMH1608HL300L6704
AVR-
M160
8C12
0MT2
AB
VA
673
FBMH1608HL300L6703
BK1608HM102
L6702
1;B
C67
01
BK1608LM751
L6701
1AV4J11SJ082GCN671
HEC3600-017010
DC JACK
JK671
0;1/16ZR6701
0;1/16ZR6702
0;1/16ZR6703
1AV4J11B7431GCN672
4VCC5VIDEO6GND7AUDIO8AVDET(G)
TO CP1(PWA)
1GND2+D3-D
Z1Z2
1
2
3
4 VCC5 VIDEO6 GND7 AUDIO8 AVDET(G)
1 GND2 +D3 -D
Z1 Z2 Z3 Z4
T3-02300/SX823-WKO
TB3 BOARD - AC ADAPTER/USBCONNECTOR
TO CP1(DMA)MAIN CN103 TO USB/AV
P264_0020EC_
Diagrams
SM7648-1 – 11NOV05 99
Component LocatorAll BOARDS
P264_0031DC_Board Locator
CA1 BOARD - CCD
TB3 BOARD - AC ADAPTER/USB CONNECTOR
CP1 BOARD - MCU
ST2 BOARD - STROBE POSITION
TB2 BOARD -FOCUS ANDSTROBE MODETB4 BOARD -
BATTERYSENSOR
ST1 BOARD -CAPACITOR
TB1 BOARD - SHUTTER ANDMODE DIAL ST3 BOARD -
HOT SHOE STROBE
SE
RV
ICE
MA
NU
AL
10011N
OV
05 – SM
7648-1
CA
1 BO
AR
D - C
CD
F6900BBSX823_CA1
SIDE-A
F6900BBSX823_CA1
SIDE-B
+
+
R9007R9008
C906
3
C906
4
C9065
R9069R9070
R9071R9072
R9073
C900
6
C9007
L9002L9003
L9004L9005 C9075
C9076
C9077C9078
C9010
D9001
C9025
C9026
C9027
C9028
R9001
C9029
R9002
R9003
R9004
R9005
R9006
R9009
R9010
R9011
R9012
R9013
R9014
R9015 R9016
R9017R9018
R9021
R9022
R9023
R9024
C9061
C9066 C9067
C9069
C9070C9071
C9072
C9073
R9061
R9063
R9068
L9001
C9002
C9003
Q9001
C9008C9009
Q9002
R906
2
RB90
4
CL902
IC903D9002
C9062
C9068
C9074
CB901
CB902
CB903
CB904
RB901RB902
RB903
CN901
IC904
IC905
IC906C9001
CL901
IC901
P264_0021FC_CA1 BOARD - CCD
Diag
rams
SM
7648-1 – 11NO
V05
101
CP
1 BO
AR
D - M
CU
, 1 of 2
SX823_CP1
SIDE-A
F45A
GRAYRED
F6900AC
PK
GYDC+
DC-
WHITE
BLACK
GRAY
PIN
K
RD
WT
RD
MIC
BL
GND
VR501+
S3001
C131
0
C150
4
Q150
1
C131
1
C131
2
C131
3
C170
1
C1702
C1704C1
706
C151
2
C1707
C151
3
C151
5
D130
1
C1901
D130
2
D130
3
C1903
D1304
R1301
C190
6
C1712 R130
3
C171
3
R130
4
IC171
L100
1
L1003
L100
4
D170
1
D170
2
IC182
R170
2
L101
1
L101
2
R171
5
Q500
1Q5
002
Q5003
Q500
9
R7502
R7507
C5016
C5018
C5019
Q5019
C5405 C540
6
R751
4
C5021
C502
2
R751
6
Q5020
D500
3
D5007
D5009
C503
0
C503
5
D5404
VA301
VA30
2
VA303
R5048
C1001
C100
2
C100
3
C100
4
C100
5
C100
6
C100
7
C100
8
C120
1
C1202C101
1
C101
2C1013C1014
C1015
VA13
1
VA132
C102
1
C1022
C102
4
C1027C1028R1005
C9501
C950
2
C950
3
C180
3
C9504
C181
0
C9511
C9513
C9519
R1021
C182
2C182
3
C182
4
C105
5
C182
6
R9501
C182
9
R950
2 R9503
R9504
L130
1
R9505
L130
2
R9506
R950
7
L130
3
C1830
R950
9
L1305
C183
1
C183
2
C183
3
C183
4C1
835
R9511
R181
3
R181
4
C107
6
C107
7
R1054R1
068
R1069
C530
1
R1072
C530
3
C530
4
Q530
2
Q5303
C800
1
C8002
C8005
C8007
C8008
C800
9
C8010
C8011
C3001
C3004
R5304
C3006
C300
7C3
008
IC103
D800
1D8
002
D800
3
C3013
C301
5
R800
2
R8006
L5010
L5011
D3001
D3002
D3003
D3004
IC131C130
1
C1303
C1304
C130
5
Q130
1
C130
6
C1307
C130
8
Q130
4
C130
9
R1718 R171
9R1
720
R300
2
C300
9
R302
3R3
024
R302
5
R302
6R3
027
Q130
5C1025
C1026
C1029
C1031 C1032
L1005
C5305
L170
1
Q530
4
Q3002
Q300
4Q3
005
Q3007
Q130
2
Q1303
Q130
6
Q5011
Q5018
R1816C1836C1837C1838
Q950
4
R9523
R952
4
D1703
C130
2
C1066
C1067
IC15
2
IC541
R130
2
R130
5
R1306
IC172
R130
7
R130
8
R1309
R150
1
R150
3
R1310
R131
1
IC95
1
IC181
R1509
R170
1
CN801
R170
3 R1709
IC19
2
R1710R1711
R171
2
R171
3
R171
4
CB101
CB102
CB10
3
CB106
Q5006
CB10
7
R750
3
CB30
1
R750
5
CB30
2
CB30
3
R7508
C5403
R751
0
R751
3
R751
5
D5001
Q540
9
D500
2
C502
6
C5027
D5006
R500
6
RB10
2
R500
7
RB10
3
R500
8
RB30
2
RB303
RB111
RB305
RB306
RB11
3
RB11
4
R501
8
RB11
5
X300
1
D5405
RB30
9
X300
2
RB116
R5403
R540
6
R540
7
RB31
0
R5408
RB311
R5021
R540
9
R5023
RB121
R5025
RB12
2
R5026
R502
8
R541
0
R503
1
R5032
L5301
RB132
R504
0
IC80
1
F500
4
CB171
X110
1
CB18
4
R100
2
CN10
3
R100
3
R100
4
R100
6
R100
7R10
08R1
009
C950
5R1
201
C9506
R120
2
CN303
C9508
R101
0
C950
9
R1011
RB95
2
R1012
RB955
C9510
CN501
CN502
C182
8
R1030
R180
1
R103
8
R181
1
R1812
R181
5
R105
0
R105
3
R105
5R1
056
R1057
R105
9
VR501
R1253R1060
R125
4R1
062
R1064
R106
6R1067
CN171
C5302
R107
3
Q5301
C8003
C8004
CB801 CB802 CB803
CN191
D530
1
C8012
C8013
R5301
C300
2
R530
2
R5303
C3003
R530
5
C3005
R530
6
IC106
C301
0
C3011
C3012C301
4IC
302
R800
4
L5008
R800
5
R800
7
R8009
R8010
IC121
R3003
R3004
R3005
R3006R3007
R3008R3009
R3012
R3013
R301
4
R3015R3016
R3017
R301
8
R3019
R3021
S300
2
S3003
S300
4S3
005
IC531
S300
6
S300
7S3
008
R1716R1717
R9520
R101
6R1
017
R530
7
IC101
IC191
Q500
4
CN30
4
IC301
CL546
CL13
1
CL195
CL560
CL551CL544
CL52
6
CL133
CL13
4
CL509
CL194
CL565
CL543
CL154
CL132
CL10
4
CL559
CL553
CL151
CL517
CL17
8
CL557
CL150
CL516
CL564
CL541CL515
CL10
3
CL558
CL507
CL510 CL502
CL193
CL153
CL192
CL138
CL518
CL545
CL501
CL18
2
CL17
6
CL555
CL547
CL542
CL139
CL18
1
CL563
CL554
CL152
CL527
CL10
2
CL197
CL17
9
CL804
CL952
CL954 CL961CL958
CL953CL
801
CL963
CL959
CL956
CL957
CL803
CL955
CL951
CL80
2
CL18
6
CL18
3
CL303
CL190
CL18
0
CL18
8
CL304
CL175
CL302
CL18
5
CL301
CL187CL191
CL189
CL18
4
CL508
CL402
CL404
CL135
CL401
R1058
R170
4
CL806
CL807CL805
R120
3
P264_0022FC_CP1 BOARD - MCU1 of 2
F4
SERVICE MANUAL
102 11NOV05 – SM7648-1
CP1 BOARD - MCU, 2 of 2
F32A
BA
T+
BA
T-F1
5A
PK
F2
CL5
06
2AF5
2A
SID
E-B
WT
GY
+
+
CN141
CN10
2
C1902
Q1901
Q190
2
Q1908
L100
2
D1901
R1903
R1910R1911
C750
5
R191
2
Q7502
C750
6
C7507
C750
8
C7509
C751
0
C751
1
C7512
C7513
C7514
C7515
C7516
C500
1
C500
3
C500
5
D7501
C5010
R7504
C5011
L700
1L7002
C501
4
C501
5
R7509
C501
7
C540
1
Q501
6
Q501
7
L720
0
C540
4
L7201
Q540
1
Q540
3
C540
7
C502
0
C5408
C540
9
Q540
6
C5023
C5024
R7519
D500
4
R5001
D500
5
C5411
D500
8
R752
1
C5032
C503
4
C5036
C5037
C5038
C5039
D540
1
C504
0
R501
9C5
041
D540
6
R5402
D540
7
R541
1R5
412
R541
3
R541
4
R541
5
R541
6
R541
7
R541
9
R5037
R542
2
R5424
C1009
C1010
C1016
C1017
C101
8C1
019
Q1401
C1020
C700
1
C7003
C7004 C7005
C700
6
C700
7
C700
8
C700
9
C7200
C7201
C7202
C7203
C7204
C701
0
C720
5
C701
1
C7206
C7012
C720
7
C7013
C7208
C7014
C7209
C701
5
C701
6C7017
C7210
C7211
VA95
1
C7212
R9512
VA952
C7213
R9513VA953
VA954
C7020
C7214
C7215
VA955
C721
6
R9518
R9519
C721
9C7220
C7221 C7222
C722
3C7
224
R7008
R7009
C7227
C722
8
C722
9
R7010R7012R7013
C723
0
R7015
C7232
C7233
R7017
C7234
R7210
R7211
R7218R7223
R7033
R7232
R723
3
R723
4
R7235
R7236
R7238
R7256
R7257
R7264
R726
7
D300
7
D3008
IC703
R301
0
R301
1
C951
4
L750
1
C1023
Q7200
C723
1
C140
2
C140
3
C1401C1404
C1405
C7235
R140
6
R140
3 R1405R1404R1402
L5003
R725
4R7
255
C7240
C7238
C723
7
C7239
C7236
C7241
Q500
5
Q5015
Q540
4
Q1402
Q950
2Q9
503
Q3003
Q300
6
Q501
0
Q501
2
Q501
3
Q3001
R7035
R703
6
R752
2R7037
X7001
R190
1R19
02IC
193
R190
4R1
905
R191
3
C500
2
C5004
C5006
C500
7
C5008C5009
Q5007
Q500
8
C5012
R7506
C5013
C540
2
R7511
Q5402
Q5405
R751
7
R7518
C5025
C502
9
R500
2
R5003
C541
3
R752
0
R5004
RB101
R5005
RB104 RB105
R5009
C503
1
RB106
C5033
RB107RB109
R501
0
R5011
RB30
1
R5012
R501
3
RB110
R5014
R501
5
R5016
D5402
R5017
RB30
7
D5403
R540
1
C5042
C504
3
R540
4
R5405
R502
0
R5022R5024
R502
7
R503
0
R541
8
R503
3
R503
4
R5035R5036
R503
8
R5420
R5039
R5421R5426
R504
1
R504
2
R5043
R5044
R5045
F500
1
RB141
R504
6
F500
2
RB142
R504
7
F5003
F500
5
Z3001
T540
1
CN101
CN30
1
CN30
2
C7000
CN701
C7217
C7218
R700
1R7
002
R700
3R7004
R700
5
R7006
R7007
R7200
R720
1R7
202
R7203R7
204
R720
5
R7011
R7206R7207
R7208
R7014
R720
9
R7016R7018
R7019
R721
2
R721
3
R7020
R7214
R7021
R7215R7022 R7
023
R702
4
R7219
R702
5R7
026
R722
1
R722
4R7225
R7226R7227
R722
8
R703
4
R722
9
CN95
1
R723
0
R723
1
CN19
2
CN19
3
R724
0
R7241
R724
2
R7243
R724
4
R7245
R7246
R7247
R725
0
R725
1
R725
2
R7253
L5004
L5005
L5006
L500
7
L5009
IC501
IC50
2
IC503
R7265
R726
6
R7268
R3001
R7269
IC70
1
R7276
R302
0
R3022
R101
3R10
15
R5425
R9515R9516
R302
9R3
028
R1914IC
194
IC199
IC732
IC73
3
CN19
4
CN19
5
IC731
IC195
IC722
IC72
4
IC72
9
IC75
3
IC19
7
IC19
8
CN70
2
IC70
2
IC75
1
IC752
IC72
6
IC721
IC72
3
IC72
5
IC72
8
IC73
0
CL52
1
CL50
3
CL56
6
CL52
2
CL50
6
CL53
0
CL52
3
CL10
1
CL55
0
CL51
2
CL56
1
CL52
0
CL51
3
CL52
5
CL51
9
CL55
2
CL51
1
CL52
4
CL56
2
CL53
2
CL52
8CL
504
CL53
1
CL51
4
CL56
7
CL529
CL88
3
CL71
6
CL72
7
CL71
7
CL88
5CL
884
CL71
8
CL72
8
CL50
5
IC75
4
R120
4
CP1
BOAR
D - M
CU2
of 2
P264
_002
3FC_
F3
F2F5
F1
Diagrams
SM7648-1 – 11NOV05 103
ST1 BOARD - CAPACITOR
ST2 BOARD - STROBE POSITION
ST3 BOARD - HOT SHOE STROBE
SID
E-A
SX
823_
ST1
F700
0AA
GRAY
RED
SIDE-BCL582
CL581
ST1 BOARD - CAPACITORP264_0026BC_
ST2 BOARD - STROBE POSITION
SIDE-A
GY
BL
SX823_ST2F7000BA
SIDE-B
S680
1
CL682
CL681
P264_0024BC_
LCLK
SIDE-A
LDT
X
LCE
GND
F700
0CA
SX
823_
ST3
SID
E-B
C5601
L5601
L5602
L5603
Q560
1
D5601
R5601
R5602
CN56
1
CL561
P264_0025BC_ ST3 BOARD - HOT SHOE STROBE
SERVICE MANUAL
104 11NOV05 – SM7648-1
TB1 BOARD - SHUTTER AND MODE DIAL
TB2 BOARD - FOCUS AND STROBE MODE
SIDE-B
GY
BL
SX
823_
TB1
F7000DA
SIDE-A
S6005
S6006
S6007
S6008S6009
TB1 BOARD -SHUTTER and MODE DIAL
P264_0028EC_SID
E-A
RD
BL
GY
WT S
X82
3_TB
2
SID
E-B
F700
0EA
S6502
S6501
S65
03
D6501
S650
2
CL651CL652
CL653CL654
S6501
S6503
TB2 BOARD - FOCUS and STROBE MODE
P264_0030BC_
Diagrams
SM7648-1 – 11NOV05 105
TB3 BOARD - AC ADAPTER/USB CONNECTOR
TB4 BOARD - BATTERY SENSOR
SIDE-A
DC
+D
C-
PK
GY
F7000FA
SID
E-B
SX823_TB3 JK671
CN672
L670
1
L670
2
L670
3
L6704
CN671CL672CL671
R6701
R6702 R670
3
VA671
VA672
VA673
L6705 C6701
P264_0029BC_ TB3 BOARD -AC ADAPTER/USB CONNECTOR
SID
E-B
F7000G
A
SX
823TB
4
BLW
H
SIDE-AS6901
P264_0027BC_
TB4 BOARD - BATTERY SENSOR
Publication History
Printed in U.S.A. • sm7648_1.fm
EASTMAN KODAK COMPANYRochester, NY 14650
Section 8: Publication History
Publication Date
Publication No.
ChangedPages
FileName Notes
11NOV05 SM7648-1 --- sm7648_1.fm New Publication
Kodak and EasyShare are trademarks of Eastman Kodak Company.