![Page 1: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/1.jpg)
NESC Academy
1
Shock Response Spectra & Time History SynthesisBy Tom Irvine
83rd Shock and Vibration Symposium 2012
![Page 2: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/2.jpg)
2
This presentation is sponsored by
NASA Engineering & Safety Center (NESC)
Dynamic Concepts, Inc. Huntsville, Alabama
![Page 3: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/3.jpg)
3
Contact Information
Tom Irvine Email: [email protected]
Phone: (256) 922-9888
The software programs for this tutorial session are available at:
http://www.vibrationdata.com
Username: lunarPassword: module
![Page 4: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/4.jpg)
NESC Academy
Response to Classical Pulse
Excitation
![Page 5: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/5.jpg)
NESC AcademyOutline
1. Response to Classical Pulse Excitation
2. Response to Seismic Excitation
3. Pyrotechnic Shock Response
4. Wavelet Synthesis
5. Damped Sine Synthesis
6. MDOF Modal Transient Analysis
![Page 6: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/6.jpg)
NESC Academy
6
Classical Pulse Introduction
Vehicles, packages, avionics components and other systems may be subjected to base input shock pulses in the field
The components must be designed and tested accordingly
This units covers classical pulses which include:
Half-sine Sawtooth Rectangular etc
![Page 7: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/7.jpg)
NESC Academy
7
Shock Test Machine
Classical pulse shock testing has traditionally been performed on a drop tower
The component is mounted on a platform which is raised to a certain height
The platform is then released and travels downward to the base
The base has pneumatic pistons to control the impact of the platform against the base
In addition, the platform and base both have cushions for the model shown
The pulse type, amplitude, and duration are determined by the initial height, cushions, and the pressure in the pistons
platform
base
![Page 8: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/8.jpg)
NESC Academy
8
Half-sine Base Input
1 G, 1 sec HALF-SINE PULSE
Time (sec)
Accel (G)
![Page 9: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/9.jpg)
9
Natural Frequencies (Hz):
0.063 0.125 0.25 0.50 1.0 2.0 4.0
Systems at Rest
Soft Hard
Each system has an amplification factor of Q=10
![Page 10: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/10.jpg)
10
Click to begin animation. Then wait.
![Page 11: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/11.jpg)
11
Natural Frequencies (Hz):
0.063 0.125 0.25 0.50 1.0 2.0 4.0
Systems at Rest
Soft Hard
![Page 12: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/12.jpg)
12
Responses at Peak Base Input
Soft Hard
Hard system has low spring relative deflection, and its mass tracks the input with near unity gain
Soft system has high spring relative deflection, but its mass remains nearly stationary
![Page 13: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/13.jpg)
13
Soft Hard
Responses Near End of Base Input
Middle system has high deflection for both mass and spring
![Page 14: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/14.jpg)
NESC Academy
14
Soft Mounted Systems
Soft System Examples:
Automobiles isolated via shock absorbers
Avionics components mounted via isolators
It is usually a good idea to mount systems via soft springs.
But the springs must be able to withstand the relative displacement without bottoming-out.
![Page 15: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/15.jpg)
15
Isolator Bushing
Isolated avionics component, SCUD-B missile.
Public display in Huntsville, Alabama, May 15, 2010
![Page 16: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/16.jpg)
16
But some systems must be hardmounted.
Consider a C-band transponder or telemetry transmitter that generates heat. It may be hardmounted to a metallic bulkhead which acts as a heat sink.
Other components must be hardmounted in order to maintain optical or mechanical alignment.
Some components like hard drives have servo-control systems. Hardmounting may be necessary for proper operation.
![Page 17: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/17.jpg)
NESC Academy
17
SDOF System
![Page 18: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/18.jpg)
NESC Academy
18
Free Body Diagram
Summation of forces
![Page 19: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/19.jpg)
NESC Academy
19
Derivation
19
Equation of motion
Let z = x - y. The variable z is thus the relative displacement.
Substituting the relative displacement yields
Dividing through by mass yields
![Page 20: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/20.jpg)
NESC Academy
20
Derivation (cont.)
is the natural frequency (rad/sec)
is the damping ratio
By convention
![Page 21: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/21.jpg)
NESC Academy
21
Base Excitation
Equation of Motion
Solve using Laplace transforms.
Half-sine Pulse
![Page 22: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/22.jpg)
NESC Academy
22
SDOF Example
A spring-mass system is subjected to:
10 G, 0.010 sec, half-sine base input
The natural frequency is an independent variable
The amplification factor is Q=10
Will the peak response be
> 10 G, = 10 G, or < 10 G ?
Will the peak response occur during the input pulse or afterward?
Calculate the time history response for natural frequencies = 10, 80, 500 Hz
![Page 23: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/23.jpg)
NESC Academy
23
SDOF Response to Half-Sine Base Input
>> halfsine halfsine.m version 1.4 December 20, 2008 By Tom Irvine Email: [email protected] This program calculates the response of a single-degree-of-freedom system subjected to a half-sine base input shock. Select analysis 1=time history response 2=SRS 1 Enter the amplitude (G) 10 Enter the duration (seconds) 0.010 Enter the natural frequency (Hz) 10 Enter amplification factor Q 10
maximum acceleration = 3.69 G minimum acceleration = -3.154 G Plot the acceleration response time history ? 1=yes 2= no 1
![Page 24: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/24.jpg)
24
maximum acceleration = 3.69 G minimum acceleration = -3.15 G
![Page 25: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/25.jpg)
25
maximum acceleration = 16.51 G minimum acceleration = -13.18 G
![Page 26: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/26.jpg)
26
maximum acceleration = 10.43 G minimum acceleration = -1.129 G
![Page 27: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/27.jpg)
NESC Academy
27
Summary of Three Cases
Natural Frequency (Hz)
Peak PositiveAccel (G)
Peak Negative Accel (G)
10 3.69 3.15
80 16.5 13.2
500 10.4 1.1
A spring-mass system is subjected to:
10 G, 0.010 sec, half-sine base input
Shock Response Spectrum Q=10
Note that the Peak Negative is in terms of absolute value.
![Page 28: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/28.jpg)
NESC Academy
28
Half-Sine Pulse SRS
>> halfsine halfsine.m version 1.5 March 2, 2011 By Tom Irvine Email: [email protected] This program calculates the response of a single-degree-of-freedom system subjected to a half-sine base input shock. Assume zero initial displacement and zero initial velocity. Select analysis 1=time history response 2=SRS 2 Enter the amplitude (G) 10 Enter the duration (seconds) 0.010 Enter the starting frequency (Hz) 10 Enter amplification factor Q 10
Plot SRS ? 1=yes 2= no 1
![Page 29: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/29.jpg)
29
X: 80 HzY: 16.51 G
SRS Q=10 10 G, 0.01 sec Half-sine Base Input
Natural Frequency (Hz)
![Page 30: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/30.jpg)
NESC Academy
30
Program Summary
Matlab Scripts
halfsine.m
terminal_sawtooth.m
Video
HS_SRS.avi
Papers
sbase.pdf
terminal_sawtooth.pdf
unit_step.pdf
![Page 31: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/31.jpg)
NESC Academy
Response to Seismic Excitation
![Page 32: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/32.jpg)
NESC Academy
Nine people were killed by the May 1940 Imperial Valley earthquake. At Imperial, 80 percent of the buildings were damaged to some degree. In the business district of Brawley, all structures were damaged, and about 50 percent had to be condemned. The shock caused 40 miles of surface faulting on the Imperial Fault, part of the San Andreas system in southern California. Total damage has been estimated at about $6 million. The magnitude was 7.1.
El Centro, Imperial Valley, Earthquake
![Page 33: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/33.jpg)
NESC AcademyEl Centro Time History
-0.4
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
0.4
0 10 20 30 40 50
TIME (SEC)
AC
CE
L (G
)EL CENTRO EARTHQUAKE NORTH-SOUTH COMPONENT
![Page 34: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/34.jpg)
NESC AcademyAlgorithm
Problems with arbitrary base excitation are solved using a convolution integral.
The convolution integral is represented by a digital recursive filtering relationship for numerical efficiency.
![Page 35: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/35.jpg)
NESC AcademySmallwood Digital Recursive Filtering Relationship
2idnd
n
1idd
dn
idnd
2in
1idni
yTsinTexpT
1T2exp
yTsinT
1TcosTexp2
yTsinTexpT
11
xt2exp
xtcostexp2x
![Page 36: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/36.jpg)
NESC Academy
Run Matlab script: arbit.m
Acceleration unit : G
ASCII text file: elcentro_NS.dat
Natural Frequency (Hz): 1.8
Q=10
Include Residual? No
Plot: maximax
El Centro Earthquake Exercise I
![Page 37: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/37.jpg)
NESC AcademyEl Centro Earthquake Exercise I
Peak Accel = 0.92 G
![Page 38: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/38.jpg)
NESC AcademyEl Centro Earthquake Exercise I
Peak Rel Disp = 2.8 in
![Page 39: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/39.jpg)
NESC Academy
Run Matlab script: srs_tripartite
Acceleration unit : G
ASCII text file: elcentro_NS.dat
Starting frequency (Hz): 0.1
Q=10
Include Residual? No
Plot: maximax
El Centro Earthquake Exercise II
![Page 40: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/40.jpg)
NESC AcademySRS Q=10 El Centro NS
fn = 1.8 Hz
Accel = 0.92 G
Vel = 31 in/sec
Rel Disp = 2.8 in
![Page 41: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/41.jpg)
NESC AcademyPeak Level Conversion
omegan = 2 fn
Peak Acceleration ( Peak Rel Disp )( omegan^2)
Pseudo Velocity ( Peak Rel Disp )( omegan)
Run Matlab script: srs_rel_disp
Input : 0.92 G at 1.8 Hz
![Page 42: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/42.jpg)
NESC Academy
Note that current Caltrans standards require bridges to withstand an equivalent static earthquake force (EQ) of 2.0 G.
May be based on El Centro SRS peak Accel + 6 dB.
Golden Gate Bridge
![Page 43: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/43.jpg)
NESC Academy
43
Program Summary
Matlab Scripts
arbit.m
srs.m
srs_tripartite.m
![Page 44: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/44.jpg)
NESC Academy
Pyrotechnic Shock Response
![Page 45: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/45.jpg)
NESC Academy
45
Delta IV Heavy Launch
The following video shows a Delta IV Heavy launch, with attention given to pyrotechnic events.
Click on the box on the next slide.
![Page 46: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/46.jpg)
NESC Academy
46
Delta IV Heavy Launch (click on box)
![Page 47: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/47.jpg)
NESC Academy
47
Pyrotechnic Events
Avionics components must be designed and tested to withstand pyrotechnic shock from:
Separation Events•Strap-on Boosters•Stage separation•Fairing Separation•Payload Separation
Ignition Events•Solid Motor•Liquid Engine
![Page 48: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/48.jpg)
NESC Academy
48
Frangible Joint
The key components of a Frangible Joint:
♦ Mild Detonating Fuse (MDF)♦ Explosive confinement tub♦ Separable structural element♦ Initiation manifolds ♦ Attachment hardware
![Page 49: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/49.jpg)
NESC Academy
49
Sample SRS Specification
fn (Hz) Peak (G)
100 100
4200 16,000
10,000 16,000
Frangible Joint, 26.25 grain/ft, Source Shock
SRS Q=10
![Page 50: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/50.jpg)
NESC Academy
50
dboct.exe
Interpolate the specification at 600 Hz.
The acceleration result will be used in a later exercise.
![Page 51: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/51.jpg)
51
![Page 52: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/52.jpg)
NESC Academy
52
Pyrotechnic Shock Failures
Crystal oscillators can shatter.Large components such as DC-DC converters can detached from circuit boards.
![Page 53: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/53.jpg)
NESC AcademyFlight Accelerometer Data, Re-entry Vehicle Separation Event
Source: Linear Shaped Charge.
Measurement location was near-field.
![Page 54: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/54.jpg)
NESC AcademyPyrotechnic Shock Exercise
Run script: srs.m
External ASCII file: rv_separation.dat
Starting Frequency: 10 Hz
Q=10
![Page 55: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/55.jpg)
NESC AcademyFlight Accelerometer Data SRS
Absolute Peak is 20385 G at 2420 Hz
![Page 56: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/56.jpg)
NESC AcademyFlight Accelerometer Data SRS (cont)
Absolute Peak is 526 in/sec at 2420 Hz
![Page 57: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/57.jpg)
NESC Academy
For electronic equipment . . .
An empirical rule-of-thumb in MIL-STD-810E states that a shock response spectrum is considered severe only if one of its components exceeds the level Threshold = [ 0.8 (G/Hz) * Natural Frequency (Hz) ]
For example, the severity threshold at 100 Hz would be 80 G.
This rule is effectively a velocity criterion.
MIL-STD-810E states that it is based on unpublished observations that military-quality equipment does not tend to exhibit shock failures below a shock response spectrum velocity of 100 inches/sec (254 cm/sec).
The above equation actually corresponds to 50 inches/sec.
It thus has a built-in 6 dB margin of conservatism.
Note that this rule was not included in MIL-STD-810F or G, however.
Historical Velocity Severity Threshold
![Page 58: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/58.jpg)
NESC Academy
Wavelet Synthesis
![Page 59: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/59.jpg)
NESC Academy
59
Shaker Shock
A shock test may be performed on a shaker if the shaker’s frequency and amplitude capabilities are sufficient.
A time history must be synthesized to meet the SRS specification.
Typically damped sines or wavelets.
The net velocity and net displacement must be zero.
![Page 60: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/60.jpg)
NESC Academy
60
Wavelets & Damped Sines
♦ A series of wavelets can be synthesized to satisfy an SRS specification for shaker shock
♦ Wavelets have zero net displacement and zero net velocity
♦ Damped sines require compensation pulse
♦ Assume control computer accepts ASCII text time history file for shock test in following examples
![Page 61: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/61.jpg)
NESC Academy
61
Wavelet Equation
Wm (t) = acceleration at time t for wavelet m
Am = acceleration amplitude f m = frequency t dm = delay
Nm = number of half-sines, odd integer > 3
![Page 62: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/62.jpg)
NESC Academy
62
Typical Wavelet
-50
-40
-30
-20
-10
10
20
30
40
50
0
0 0.02 0.04 0.06 0.080.012
9
8
7
6
5
4
3
2
1
TIME (SEC)
AC
CE
L (
G)
WAVELET 1 FREQ = 74.6 Hz NUMBER OF HALF-SINES = 9 DELAY = 0.012 SEC
![Page 63: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/63.jpg)
NESC Academy
63
SRS Specification
MIL-STD-810E, Method 516.4, Crash Hazard for Ground Equipment.
SRS Q=10
Synthesize a series of wavelets as a base input time history.
Goals:
1. Satisfy the SRS specification.2. Minimize the displacement, velocity and acceleration of the base input.
Natural Frequency (Hz)
Peak Accel (G)
10 9.4
80 75
2000 75
![Page 64: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/64.jpg)
NESC Academy
64
Synthesis Steps
Step Description
1 Generate a random amplitude, delay, and half-sine number for each wavelet. Constrain the half-sine number to be odd. These parameters form a wavelet table.
2 Synthesize an acceleration time history from the wavelet table.
3 Calculate the shock response spectrum of the synthesis.
4 Compare the shock response spectrum of the synthesis to the specification. Form a scale factor for each frequency.
5 Scale the wavelet amplitudes.
![Page 65: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/65.jpg)
NESC Academy
65
Synthesis Steps (cont.)
Step Description
6 Generate a revised acceleration time history.
7 Repeat steps 3 through 6 until the SRS error is minimized or an iteration limit is reached.
8 Calculate the final shock response spectrum error. Also calculate the peak acceleration values.Integrate the signal to obtain velocity, and then again to obtain displacement. Calculate the peak velocity and displacement values.
9 Repeat steps 1 through 8 many times.
10 Choose the waveform which gives the lowest combination of SRS error, acceleration, velocity and displacement.
![Page 66: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/66.jpg)
NESC Academy
66
Matlab SRS Spec
>> srs_spec=[ 10 9.4 ; 80 75 ; 2000 75 ]
srs_spec =
1.0e+003 *
0.0100 0.0094 0.0800 0.0750 2.0000 0.0750
![Page 67: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/67.jpg)
NESC Academy
67
Wavelet Synthesis Example
>> wavelet_synth
wavelet_synth.m, ver 1.2, December 31, 2010
by Tom Irvine Email: [email protected]
This program synthesizes a time history using wavelets to satisfy a shock response spectrum (SRS) specification.
The program also optimizes the time history to yield the lowest overall error, acceleration, velocity, and displacement.
The optimization is performed via trial-and-error.
Select data input method. 1=keyboard 2=internal Matlab array 3=external ASCII file 2
![Page 68: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/68.jpg)
NESC Academy
68
Wavelet Synthesis Example (cont)
The array must have two columns: Natural Freq(Hz) SRS(G) Enter the array name: srs_spec
Enter octave spacing. 1= 1/3 2= 1/6 3= 1/12
3
Enter damping format for SRS. 1= damping ratio 2= Q
2 Enter SRS amplification factor Q (typically 10) 10 Enter the number of trials. 200
Enter units 1=English: G, in/sec, in 2=metric: G, m/sec, mm 3=metric: m/sec^2, m/sec, mm 1
![Page 69: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/69.jpg)
NESC Academy
69
Wavelet Synthesis Example (cont)
The following weight numbers will be used to select the optimum waveform. Suggest using integers from 0 to 10 Enter individual error weight 2 Enter total error weight 2 Enter displacement weight 1 Enter velocity weight 1 Enter acceleration weight 1
![Page 70: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/70.jpg)
NESC Academy
70
Wavelet Synthesis Example (cont)
Peak Accel = 25.274 G Peak Velox = 39.119 in/sec Peak Disp = 0.450 inch Max Error = 2.013 dB
Output Time Histories:
displacement velocity acceleration shock_response_spectrum wavelet_table [index accel(G) freq(Hz) half-sines delay(sec)] Elapsed time is 804.485450 seconds (about 13 min)
![Page 71: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/71.jpg)
NESC Academy
71
Synthesized Acceleration
0 0.05 0.1 0.15 0.2 0.25-30
-20
-10
0
10
20
30Acceleration
Time (sec)
Acc
el (
G)
![Page 72: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/72.jpg)
NESC Academy
72
Synthesized Velocity
0 0.05 0.1 0.15 0.2 0.25-40
-30
-20
-10
0
10
20
30
40
Time (sec)
Velocity
Ve
loci
ty (
in/s
ec)
![Page 73: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/73.jpg)
NESC Academy
73
Synthesized Displacement
0 0.05 0.1 0.15 0.2 0.25-0.5
-0.4
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
0.4
0.5
Time (sec)
Displacement
Dis
p (
inch
)
![Page 74: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/74.jpg)
NESC Academy
74
Synthesized SRS
10 100 1000 200010
0
101
102
103
Pe
ak
Acc
el (
G)
Natural Frequency (Hz)
Shock Response Spectrum Q=10
positive
negative
spec & tol
![Page 75: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/75.jpg)
NESC Academy
75
data_convert.m
>> data_convert
data_convert.m ver 2.0 March 12, 2010
by Tom Irvine Email: [email protected]
This program converts Matlab data to ASCII text data.
Enter the output filename: wavelet_table.txt
Enter the Matlab data format: 1=Data is in a single array 2=Data is in multiple vectors 1 Enter the Matlab vector or array name: wavelet_table Select precision: 1=single 2=double 1 Data save complete.
![Page 76: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/76.jpg)
NESC Academy
76
SDOF Modal Transient
Assume a circuit board with fn = 400 Hz, Q=10
Apply the reconstructed acceleration time history as a base input.
Use arbit.m
![Page 77: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/77.jpg)
NESC Academy
77
SDOF Response to Wavelet Series
>> arbit arbit.m ver 2.6 January 3, 2011 by Tom Irvine Email: [email protected] This program calculates the response of a single-degree-of-freedom system to an arbitrary base input time history. The input time history must have two columns: time(sec) & accel(G) Select file input method 1=external ASCII file 2=file preloaded into Matlab 3=Excel file 2 Enter the matrix name: acceleration
Enter the natural frequency (Hz) 400 Enter damping format: 1= damping ratio 2= Q 2 Enter the amplification factor (typically Q=10) 10
![Page 78: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/78.jpg)
NESC Academy
78
SDOF Response to Wavelet Series (cont)
Include residual? 1=yes 2=no 1 Add trailing zeros for residual response Calculating acceleration Calculating relative displacement Acceleration Response
absolute peak = 78.22 G
maximum = 72.26 G minimum = -78.22 G overall = 15.22 GRMS
![Page 79: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/79.jpg)
NESC Academy
79
SDOF Acceleration
0 0.05 0.1 0.15 0.2 0.25-100
-80
-60
-40
-20
0
20
40
60
80
100
Acc
el (
G)
Time (sec)
SDOF Acceleration Response fn=400 Hz Q=10
![Page 80: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/80.jpg)
Program Summary
Programs
wavelet_synth.m
data_convert.m
th_from_wavelet_table.m
arbit.m
Homework
If you have access to a vibration control computer . . . Determine whether the
wavelet_synth.m script will outperform the control computer in terms of
minimizing displacement, velocity and acceleration.
80
NESC Academy
![Page 81: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/81.jpg)
NESC Academy
81
Damped Sine Synthesis
![Page 82: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/82.jpg)
NESC Academy
82
Damped Sinusoids
Synthesize a series of damped sinusoids to satisfy the SRS.
Individual damped-sinusoid
Series of damped-sinusoids
Additional information about the equations is given in Reference documents which are included with the zip file.
![Page 83: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/83.jpg)
NESC Academy
83
Typical Damped Sinusoid
-15
-10
-5
0
5
10
15
0 0.01 0.02 0.03 0.04 0.05
TIME (SEC)
AC
CE
L (
G)
DAMPED SINUSOID fn = 1600 Hz Damping Ratio = 0.038
![Page 84: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/84.jpg)
NESC Academy
84
Synthesis Steps
Step Description
1 Generate random values for the following for each damped sinusoid: amplitude, damping ratio and delay.
The natural frequencies are taken in one-twelfth octave steps.
2 Synthesize an acceleration time history from the randomly generated parameters.
3 Calculate the shock response spectrum of the synthesis
4 Compare the shock response spectrum of the synthesis to the specification. Form a scale factor for each frequency.
5 Scale the amplitudes of the damped sine components
![Page 85: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/85.jpg)
NESC Academy
85
Synthesis Steps (cont.)
Step Description
6 Generate a revised acceleration time history
7 Repeat steps 3 through 6 as the inner loop until the SRS error diverges
8 Repeat steps 1 through 7 as the outer loop until an iteration limit is reached
9 Choose the waveform which meets the specified SRS with the least error
10 Perform wavelet reconstruction of the acceleration time history so that velocity and displacement will each have net values of zero
![Page 86: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/86.jpg)
NESC Academy
86
Specification Matrix
>> srs_spec=[100 100; 2000 2000; 10000 2000]
srs_spec =
100 100 2000 2000 10000 2000
![Page 87: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/87.jpg)
NESC Academy
87
damped_sine_syn.m
>> damped_sine_syn damped_sine_syn.m ver 3.9 October 9, 2012 by Tom Irvine Email: [email protected] This program synthesizes a time history to satisfy a shock response spectrum specification. Damped sinusoids are used for the synthesis. Select data input method. 1=keyboard 2=internal Matlab array 3=external ASCII file 2 The array must have two columns: Natural Freq(Hz) SRS(G) Enter the array name: srs_spec
![Page 88: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/88.jpg)
NESC Academy
88
damped_sine_syn.m (cont.)
Enter duration (sec): (recommend >= 0.04) 0.04 Recommend sample rate = 100000 samples/sec
Accept recommended rate? 1=yes 2=no 1 sample rate = 1e+05 samples/sec Enter damping format: 1=damping ratio 2=Q 2 Enter amplification factor Q (typically 10) 10
Number of Iterations for outer loop: 200
![Page 89: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/89.jpg)
NESC Academy
89
damped_sine_syn.m (cont.)
Perform waveform reconstruction? 1=yes 2=no 1 Enter the number of trials per frequency. (suggest 5000) 5000 Enter the number of frequencies. (suggest 500) 500
After script complete, copy array as follows:
accel_base = acceleration;
![Page 90: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/90.jpg)
NESC Academy
90
Acceleration
-800
-600
-400
-200
0
200
400
600
800
0 0.01 0.02 0.03 0.04
TIME (SEC)
AC
CE
L (G
)ACCELERATION TIME HISTORY SYNTHESIS
![Page 91: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/91.jpg)
NESC Academy
91
Velocity
-40
-30
-20
-10
0
10
20
30
40
0 0.01 0.02 0.03 0.04
TIME (SEC)
VE
LOC
ITY
(in
/sec
)VELOCITY TIME HISTORY SYNTHESIS
![Page 92: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/92.jpg)
NESC Academy
92
Displacement
-0.04
-0.03
-0.02
-0.01
0
0.01
0.02
0.03
0.04
0 0.01 0.02 0.03 0.04
TIME (SEC)
DIS
PLA
CE
ME
NT
(in
ch)
DISPLACEMENT TIME HISTORY SYNTHESIS
![Page 93: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/93.jpg)
NESC Academy
93
Shock Response Spectrum
10
100
1000
10000
100 1000 10000
Spec & 3 dB TolNegativePositive
NATURAL FREQUENCY (Hz)
PE
AK
AC
CE
L (G
)
SRS Q=10 SYNTHESIS
![Page 94: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/94.jpg)
NESC Academy
94
SDOF Modal Transient
Assume a circuit board with fn = 600 Hz, Q=10
Apply the reconstructed acceleration time history as a base input.
Use arbit.m
![Page 95: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/95.jpg)
NESC Academy
95
SDOF Response to Synthesis
>> arbit arbit.m ver 2.5 November 11, 2010 by Tom Irvine Email: [email protected] This program calculates the response of a single-degree-of-freedom system to an arbitrary base input time history. The input time history must have two columns: time(sec) & accel(G) Select file input method 1=external ASCII file 2=file preloaded into Matlab 3=Excel file 2 Enter the matrix name: accel_base Enter the natural frequency (Hz) 600 Enter damping format: 1= damping ratio 2= Q 2 Enter the amplification factor (typically Q=10) 10
![Page 96: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/96.jpg)
NESC Academy
96
SDOF Response Acceleration
Absolute peak is 626 G. Specification is 600 G at 600 Hz.
-1000
-500
0
500
1000
0 0.01 0.02 0.03 0.04
TIME (SEC)
AC
CE
L (G
)SDOF RESPONSE (fn=600 Hz, Q=10) ACCELERATION TIME HISTORY
![Page 97: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/97.jpg)
NESC Academy
97
SDOF Response Relative Displacement
Peak is 0.17 inch.
-0.020
-0.015
-0.010
-0.005
0
0.005
0.010
0.015
0.020
0 0.01 0.02 0.03 0.04
TIME (SEC)
RE
L D
ISP
(in
ch)
SDOF RESPONSE (fn=600 Hz, Q=10) RELATIVE DISPLACEMENT TIME HISTORY
![Page 98: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/98.jpg)
NESC Academy
98
Peak Amplitudes
Absolute peak acceleration is 626 G.
Absolute peak relative displacement is 0.17 inch.
For SRS calculations for an SDOF system . . . .
Acceleration / ωn2 ≈ Relative Displacement
[ 626G ][ 386 in/sec^2/G] / [ 2 p (600 Hz) ]^2 = 0.17 inch
![Page 99: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/99.jpg)
NESC Academy
99
Program Summary
Programs
dboct.exe
damped_sine_syn.m
arbit.m
Additional Program
Convert acceleration time history to Nastran format as preprocessing step. The file can then be imported into a Femap model as function:
ne_table2.exe
![Page 100: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/100.jpg)
NESC Academy
Apply Shock Pulses to Analytical Models
for MDOF & Continuous Systems
Modal Transient Analysis
![Page 101: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/101.jpg)
NESC AcademyContinuous Plate Exercise
ss_plate_base.m ver 1.6 October 10, 2012 by Tom Irvine Email: [email protected] Normal Modes & Optional Base Excitation for a simply-supported plate. Select material 1=aluminum 2=steel 3=G10 4=other 1 Enter the length (inch) 8 Enter the width (inch) 6 Enter the thickness (inch) 0.063 Structural mass = 0.3024 lbm Add non-structural mass ? 1=yes 2=no 2 Total mass = 0.3024 lbm Total mass density = 0.1 lbm/in^3 Plate Stiffness Factor D = 233.8 (lbf in)
![Page 102: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/102.jpg)
NESC AcademyContinuous Plate (cont)
First Mode 258 Hz
![Page 103: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/103.jpg)
NESC AcademyContinuous Plate (cont)
Calculate Frequency Response Function 1=yes 2=no 1 Enter uniform modal damping ratio 0.05 Enter distance x 4 Enter distance y 3 Enter maximum base excitation frequency Hz 10000 max Rel Disp FRF = 2.368e-03 (in/G) at 256 Hz max Accel FRF = 16.09 (G/G) at 259.7 Hz max Power Trans = 258.8 (G^2/G^2) at 259.7 Hz
![Page 104: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/104.jpg)
NESC AcademyContinuous Plate (cont)
Perform modal transient analysis for base excitation? 1=yes 2=no 1 Apply half-sine base input? 1=yes 2=no 2 Apply arbitrary base input? 1=yes 2=no 1 Select file input method 1=external ASCII file 2=file preloaded into Matlab 3=Excel file 2 Enter the matrix name: accel_base
![Page 105: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/105.jpg)
NESC Academy Continuous Plate (cont)
maximum frequency limit for modal transient analysis: fmax= 10000 Hz
Peak Response Values Acceleration = 1774 G Velocity = 147.2 in/sec Relative Displacement = 0.06335 in Output arrays: rel_disp_H accel_H accel_H2 acc_arb vel_arb rd_arb
![Page 106: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/106.jpg)
NESC AcademyContinuous Plate (cont)
![Page 107: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/107.jpg)
NESC AcademyContinuous Plate (cont)
![Page 108: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/108.jpg)
NESC AcademyContinuous Plate (cont)
Peak Acceleration = 1774 G
![Page 109: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/109.jpg)
NESC AcademyContinuous Plate (cont)
Velocity = 147.2 in/sec
![Page 110: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/110.jpg)
NESC AcademyContinuous Plate (cont)
Relative Displacement = 0.063 in. Relative displacement is same as plate thickness, so there is a need to address large deflection theory, nonlinearity, etc.
![Page 111: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/111.jpg)
NESC AcademyIsolated Avionics Component Example
ky4kx4
kz4
ky2kx2
ky3kx3
ky1
kx1
kz1
kz3
kz2
m, J
0
x
z
y
![Page 112: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/112.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
0b
c1
c2
a1 a2
C. G.
x
z
y
![Page 113: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/113.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
ky
ky
ky
ky
mb
0
v
y
![Page 114: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/114.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
M = 4.28 lbm
Jx = 44.9 lbm in^2
Jy = 39.9 lbm in^2
Jz = 18.8 lbm in^2
Kx = 80 lbf/in
Ky = 80 lbf/in
Kz = 80 lbf/in
a1 = 6.18 in
a2 = -2.68 in
b = 3.85 in
c1 = 3. in
c2 = 3. in
Assume uniform 8% damping
Run Matlab script: six_dof_iso.m
with these parameters
![Page 115: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/115.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
Natural Frequencies = 1. 7.338 Hz 2. 12.02 Hz 3. 27.04 Hz 4. 27.47 Hz 5. 63.06 Hz 6. 83.19 Hz
Calculate base excitation frequency response functions? 1=yes 2=no 1 Select modal damping input method 1=uniform damping for all modes 2=damping vector 1 Enter damping ratio 0.08
number of dofs =6
![Page 116: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/116.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
Apply arbitrary base input pulse? 1=yes 2=no 1 The base input should have a constant time step Select file input method 1=external ASCII file 2=file preloaded into Matlab 3=Excel file 2 Enter the matrix name: accel_base
![Page 117: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/117.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
Apply arbitrary base input pulse? 1=yes 2=no 1 The base input should have a constant time step Select file input method 1=external ASCII file 2=file preloaded into Matlab 3=Excel file 2 Enter the matrix name: accel_base
Enter input axis 1=X 2=Y 3=Z 2
![Page 118: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/118.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
![Page 119: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/119.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
![Page 120: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/120.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
Peak Accel = 4.8 G
![Page 121: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/121.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
Peak Response = 0.031 inch
![Page 122: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/122.jpg)
NESC AcademyIsolated Avionics Component Example (cont)
But . . .
All six natural frequencies < 100 Hz.
Starting SRS specification frequency was 100 Hz.
So the energy < 100 Hz in the previous damped sine synthesis is ambiguous.
So may need to perform another synthesis with assumed first coordinate point at a natural frequency < isolated component fundamental frequency. (Extrapolate slope)
OK to do this as long as clearly state assumptions.
Then repeat isolated component analysis . . . left as student exercise!
![Page 123: Shock Response Spectra & Time History Synthesis By Tom Irvine](https://reader035.vdocuments.net/reader035/viewer/2022081504/56812fe8550346895d955f35/html5/thumbnails/123.jpg)
NESC Academy
123
Program Summary
Programs
ss_plate_base.m
six_dof_iso.m
Additional programs are given at:
http://www.vibrationdata.com/StructuralDC.htm
http://www.vibrationdata.com/beams.htm
http://www.vibrationdata.com/rectangular_plates.htm
http://www.vibrationdata.com/circular_annular.htm
Papers
plate_base_excitation.pdf
avionics_iso.pdf
six_dof_isolated.pdf