Download - Signalling Prot
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 1/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 1
Tik-109/110.300
Telecommunications architectures:Protocols
Hannu H. KARI/Helsinki University of Technology (HUT)
TML-laboratory/CS/HUT
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 2/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 2
Agenda
Protocol designMultivendor interfaces
Handling protocol error
Handling lost packets
Handling corrupted data
Handling failed network elements
Fault tolerant system design
Protocol examples
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 3/36
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 4/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 4
Protocol design
• Example protocol stack
Um GbMS BSS SGSN
SNDC SMSGMM
LLC
RLC
MAC
GSM RF
Relay
RLC
MAC
GSM RF
BSSGP
Network
Service
L1
SNDC SMSGMM
LLC
BSSGP
Network
Service
L1
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 5/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 5
Protocol design
• Basic operation model
4. Confirm1. Request 3. Response 2. Indication
Level - N+1
Level - N
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 6/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 6
Multivendor interfaces
• Proprietary interfaces• Implementations of different manufacturers won’t
necessarily interwork
• Possible manufacturer extensions, interpretations,
solutions, combined equipments, ...
• Multivendor interfaces
• Well defined protocols
• Strong interoperability requirements• Interoperability testing (type approvals)
• Support for multiple versions
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 7/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 7
Handling protocol errors
• E.g., in GTP protocol (GPRS Tunneling Protocol), theprotocol layer handles:
• Protocol has version numbers
• Handling too short packets
• Unknown and erroneous headers• Unexpected message
• Missing or invalid mandatory elements
• Unknown information element
• Out of sequence information elements
• Repeated information elements
• Incorrect optional information elements
• TLV, TV, V formatting (T=Type, L=Length, V=Value)
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 8/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 8
Handling lost packets
• In principle, data packets at any protocol layer may belost
• Methods to cope lost packets
• Acknowledges
• Timers• Retries
• State machines
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 9/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 9
Handling corrupted data
• Methods to cope corrupted data• CRC checks (RLC, LLC, L2 under IP, …)
• Sanity checks of data
• State machines
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 10/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 10
Handling failed network
elements
• Network elements with permanent data (HLR failure)• After restart, inform all MSC/VLRs and SGSNs that have MSs of that HLR
• Network elements with non-permanent data (SGSN
failure)• Inform associated neigboring element
• VLRs
• Inform MS next time when it next time sends uplink message
• Inform GGSN next time when GGSN sends MT data. MS may bepaged
• MT SMSs are rejected
• CS page is sent to entire MSC/VLR area or to MSC/VLR specifiedarea
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 11/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 11
Handling failed network
elements
• Simpler network elements (GGSN failure)
• Inform SGSN when SGSN sends MO data
• Reject data packets MT packets
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 12/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 12
Fault tolerant systems
• Fault models
• Only knows faults can be handled (i.e., if you are not preparedto handle the faults, you can’t survive those faults)
• Fault prevention
• Fault detection• Fault isolation
• Reduced/Degraded service
• Fault recovery
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 13/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 13
Example:
Simple procedure, Attach
MS etwork
ATTACH REQUEST
ATTACH ACCEPT
ATTACH COMPLETE
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 14/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 14
Example:
Signaling chart
7d. Cancel Location Ack
7c. Cancel Location
7b. Update Location
7g. Update Location Ack
7e. Insert Subscriber Data
7f. Insert Subscriber Data Ack
6d. Insert Subscriber Data
6c. Cancel Location Ack
6b. Cancel Location
3. Identity Response
2. Identification Response
2. Identification Request
1. Attach Request
5. IMEI Check
3. Identity Request
4. Authentication
6a. Update Location
7a. Location Updating Request
7h. Location Updating Accept
6f. Update Location Ack
6e. Insert Subscriber Data Ack
MS BSS new SGSN old SGSN GGSN HLR EIR
old
MSC/VLR
new
MSC/VLR
9. Attach Complete
8. Attach Accept
10. TMSI Reallocation Complete
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 15/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 15
Example:
Signaling chart
• 1) The MS initiates the attach procedure by the transmission of an
Attach Request (IMSI or P TMSI and old RAI, Classmark, CKSN, AttachType, DRX Parameters, old P TMSI Signature) message to the SGSN.IMSI shall be included if the MS does not have a valid P TMSI available. If the MS has a valid P TMSI, then P TMSI and the old RAI associated withP TMSI shall be included. Classmark contains the MS's GPRS multislot
capabilities and supported GPRS ciphering algorithms in addition to theexisting classmark parameters defined in GSM 04.08. Attach Type indicateswhich type of attach that is to be performed, i.e., GPRS attach only, GPRS Attach while already IMSI attached, or combined GPRS / IMSI attach. DRXParameters indicates whether the MS uses discontinuous reception or not.
If the MS uses discontinuous reception, then DRX Parameters also indicatewhen the MS is in a non-sleep mode able to receive paging requests andchannel assignments. If the MS uses P TMSI for identifying itself and if ithas also stored its old P TMSI Signature, then the MS shall include the oldP TMSI Signature in the Attach Request message.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 16/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 16
Example:
Signaling chart
• 8) The SGSN sends an Attach Accept (P TMSI, VLR TMSI, P TMSI
Signature) to the MS. P TMSI is included if the SGSN allocates a newP TMSI.
• 9) If P TMSI or VLR TMSI was changed, the MS acknowledges thereceived TMSI(s) with Attach Complete (P TMSI, VLR TMSI).
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 17/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 17
Example:
Time critical approach
MS Network
ATTACH REQUESTStart T3310
ATTACH ACCEPT
Stop T3310
ATTACH COMPLETEStop T3350
If P-TMSI and/or
TMSI allocatedStart T3350
If P-TMSI and/or
TMSI allocated
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 18/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 18
Sequence diagramC.1 ATTACH, GPRS only, MS unknown in the network
GMMREG-ATTACH- REQ
[Attach type,
READY-timer, STANDBY-timer ]
START TattachLL-UNITDATA-REQ
[PDU=Attach Req (
IMSI or TLLIplusRAI),
oldTLLI,Cipher=off ]
GRR-DATA-REQ
[LLC-UI,
SAPI=signalling]
GRR-DATA-IND
[LLC-UI, TLLI,
RAI,CI]
LL-UNITDATA-IND
[PDU=Attach Req (
IMSI or TLLIplusRAI),
oldTLLI, CI]
LLGMM-ASSIGN-REQ
[Kc, Algorithm]
START Tauth
LL-UNITDATA-REQGRR-DATA--REQ
STOP Tauth
[ PDU=Auth-Cipher-
Req (Alg, RAND,..),
oldTLLI, Cipher=off ]
[LLC-UI,
DRX, CLM,
SAPI=signalling]
GRR-DATA-IND
[LLC-UI]
LL-UNITDATA-IND
[PDU=Auth-Cipher-
Req (Alg., RAND,…)]
LL-UNITDATA-REQ
[PDU=Auth-Cipher-
Resp (SRES),
oldTLLI,Cipher=off ]
GRR-DATA-REQ
[LLC-UI,
SAPI=signalling]
GRR-DATA-IND
[LLC-UI, oldTLLI]
LL-UNITDATA-IND
[PDU=Auth-Cipher-
Resp (SRES),
oldTLLI ]
[Kc, Algorithm]
MS NET
GMMSNDCP LLC RR SM SNDCPLLCRR BSSGPSM GMM
LLGMM-ASSIGN-REQ
START Tident
LL-UNITDATA-REQ
[ PDU=
Identification Req,
oldTLLI, Cipher=off ]
GRR-DATA--REQ
[LLC-UI,
DRX, CLM,
SAPI=signalling]
GRR-DATA-IND
[LLC-UI]
LL-UNITDATA-IND
[PDU=
Identification Req]
STOP Tident
LL-UNITDATA-REQ
[PDU=Identification-
Resp (IMSI),
oldTLLI,Cipher=off ]
GRR-DATA-REQ
[LLC-UI,
SAPI=signalling]
GRR-DATA-IND
[LLC-UI, TLLI]
LL-UNITDATA-IND
[PDU=Identification-
Resp (IMSI),
oldTLLI ]
The oldTLLI may be a
Local TLLI, or a
Foreign TLLI, or a
Random TLLI
IMSI fetched if
- No GPRS MM Context exists, and- Attach Request without IMSI
The network starts theauthentication together with setting
the ciphering mode.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 19/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 19
Example:
Service primitives
PRIMITIVE PARAMETER
(message,info elements
of message,
other
parameters)
REFERE
GMMREG-ATTACH-REQ attach-type, READY-timer, STANDBY-timer 6.6.1.1
GMMREG-ATTACH-CNF PLMNs MT-caps, attach-type. 6.6.1.2
GMMREG-ATTACH-REJ cause 6.6.1.3
GMMREG-DETACH-REQ detach-type, power-off/normal-detach 6.6.1.4
GMMREG-DETACH-CNF detach-type 6.6.1.5
GMMREG-DETACH-IND detach-type 6.6.1.6
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 20/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 20
Example:
Service primitives
• 6.6.1.1 GMMREG-ATTACH-REQ
• MS initiates the GPRS and/or IMSI attach. GMM is requested
to send an ATTACH REQUEST message to the network. The
attachment is registration pending in the MS.
• 6.6.1.2 GMMREG-ATTACH-CNF
• The attach (either GPRS-attach or IMSI-attach or both) was
successful. The network confirmed the attach, i.e.the ATTACH
ACCEPT message was received by the MS. The LLC and RR
sublayer will be informed by GMM about the TLLI to be used.
• 6.6.1.3 GMMREG-ATTACH-REJ
• The attach (either GPRS-attach or IMSI-attach or both) has
failed. The network rejected the attach attempt, i.e. the
message ATTACH REJECT was received from the network.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 21/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 21
Example:
Information exchange
• Attach request
I Information Element Type/Reference Presence Format Length
Protocol discriminator Protocol discriminator 10.2
M V 1/2
Skip indicator Skip indicator 10.3.1
M V ½
Attach request message identity Message type10.4
M V 1
MS classmark MS classmark 410.5.5.12
M LV 4 - 6
Attach type Attach type10.5.5.2
M V ½
GPRS ciphering key sequencenumber
Ciphering key sequence number 10.5.1.2
M V ½
DRX parameter DRX parameter 10.5.5.6
M V 2
Force to standby Force to standby10.5.5.7
M V ½
Spare half octet Spare half octet10.5.1.8
M V ½
P-TMSI or IMSI Mobile station identity10.5.5.13
M LV 6 - 10
MS Radio Access capabili ty MS RA capability10.5.5.12.a
O TLV 5-12
Old P-TMSI signature P-TMSI signature10.5.5.8
O TV 4
Old routing area identification Routing area identification10.5.5.15 O TV 7
Requested READY timer value
Timer 10.5.5.16
O TV 2
Requested STANDBY timer value Timer 10.5.5.16
O TV 2
MS classmark MS classmark 110.5.1.5
O TV 2
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 22/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 22
Example:
Information exchange
• 9.5.1.0 MS Radio Access capability
• This IE may be included by the MS in order to provide its radio access capabilities.
• 9.5.1.1 Old P-TMSI signature
• This IE is included if a valid P-TMSI and P-TMSI signature are stored in the MS.
• 9.5.1.2 Old routing area identification
• This IE is included if the MS has stored the old RAI and an associated valid P-TMSI.
• 9.5.1.3 Requested READY timer value
• This IE may be included if the MS wants to indicate a preferred value for READY timer.
• 9.5.1.4 Requested STANDBY timer value
• This IE may be included if the MS wants to indicate a preferred value for STANDBY
timer.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 23/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 23
Example:
Information exchange
• Attach accept
I Information Element Type/Reference Presence Format Length
Protocol discriminator Protocol discriminator 10.2
M V 1/2
Skip indicator Skip indicator 10.3.1 M V 1/2
Attach accept message identity Message type10.4
M V 1
Attach result Attach result10.5.5.1
M V 1/2
Force to standby Force to standby10.5.5.7
M V 1/2
Routing area identification Routing area identification10.5.5.15
O TV 7
Periodic RA update timer Timer value10.5.5.16
M V 1
P-TMSI signature P-TMSI signature10.5.5.8
O TV 4
Negotiated DRX parameter DRX parameter 10.5.5.6
O TV 3
Negotiated READY timer value
Timer 10.5.5.16
O TV 2
Negotiated STANDBY timer
value
Timer
10.5.5.16
O TV 2
Allocated P-TMSI Mobile station identity10.5.5.13
O TLV 7
MS identity Mobile identity10.5.1.4
O TLV 6 - 11
GMM cause GMM cause10.5.5.14
O TV 2
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 24/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 24
Example:
Information exchange
• Sample information elements
• attach result
• routing area identifier
8 7 6 5 4 3 2 1
Routing Area Identification IEI octet 1
MCC digit 2 MCC digit 1 octet 2
1 1 1 1 MCC digit 3 octet 3
MNC digit 2 MNC digit 1 octet 4
LAC octet 5
LAC cont’d octet 6
RAC octet 7
8 7 6 5 4 3 2 1
Attach resultIEI
0spare
Result ofattach
octet 1
Result of attach (octet 1)Bits3 2 1
0 0 1 GPRS only attached0 1 1 Combined GPRS/IMSI attached
All other values are reserved.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 25/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 25
Example:
Information exchange
• Attach complete
I Information Element Type/Reference Presence Format Length
Protocol discriminator Protocol discriminator 10.2
M V 1/2
Skip indicator Skip indicator 10.3.1
M V 1/2
Attach complete messageidentity
Message type10.4
M V 1
Force to standby Force to standby10.5.5.7
M V 1/2
Spare half octet Spare half octet10.5.1.8
M V 1/2
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 26/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 26
Example:
Information exchange
• Attach reject
I Information Element Type/Reference Presence Format Length
Protocol discriminator Protocol discriminator 10.2
M V 1/2
Skip indicator Skip indicator 10.3.1
M V 1/2
Attach reject message identity Message type10.4
M V 1
GMM cause GMM cause10.5.5.14
M V 1
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 27/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 27
Example:
Exception cases
• If the attach request cannot be accepted by the network, an ATTACH REJECT message
is transferred to the MS. The MS receiving the ATTACH REJECT message stops timer T3310 and takes one of the following actions depending upon the reject cause:
• # 3 (Illegal MS)# 6 (Illegal ME)# 7 (GPRS services not allowed)
• The MS shall set the GPRS update status to GU3 ROAMING NOT ALLOWED (and shall store itaccording to section 4.1.3.2.9) and shall delete any P-TMSI, P-TMSI signature, RAI and GPRSciphering key sequence number. The SIM shall be considered as invalid until switching off orthe SIM is removed. The new state is GMM-DEREGISTERED.
• # 11 (PLMN not allowed)
# 12 (Location area not allowed)# 13 (Roaming not allowed in this location area)
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 28/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 28
Example:
Exception cases
• The MS shall delete any RAI, P-TMSI, P-TMSI signature and GPRS ciphering
key sequence number stored, shall set the GPRS update status to GU3ROAMING NOT ALLOWED (and shall store it according to section 4.1.3.2.9)and shall change to state GMM-DEREGISTERED.
• The MS shall store the LAI or the PLMN identity in the appropriate
forbidden list, i.e. in the “forbidden PLMN list” for cause #11, in the list of “forbidden location areas for regional provision of service” for cause #12 orin the list of “forbidden location areas for roaming” for cause #13. In casecause #11 or #13 was received, the MS shall perform a PLMN selectioninstead of a cell selection.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 29/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 29
Example:
Abnormal cases
a) Access barred because of access class control
• The GPRS attach procedure shall not be started. The MS stays in the currentserving cell and applies normal cell reselection process. The GPRS attachprocedure is started as soon as possible, i.e. when access is granted or because of a cell change.
b) Lower layer failure before the ATTACH ACCEPT or ATTACH REJECT message isreceived
• The procedure shall be aborted, the MS shall keep, if any, the stored P-TMSI, RAI,and GPRS ciphering key sequence number and shall proceed as described below.
c) T3310 time-out
• On the first expiry of the timer, the MS reset and restart timer T3310 and shallretransmit the ATTACH REQUEST message. This retransmission is repeated untilthe timer has expired four times, i.e. on the fiftth expiry of timer T3310, the GPRSattach procedure shall be aborted and the MS shall proceed as described below.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 30/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 30
Example:
Abnormal cases
d) ATTACH REJECT, other causes than those treated in section 4.7.3.1.4
e) Change of cell into a new routing area
• If a cell change into a new routing area occurs before an ATTACH ACCEPT or ATTACH REJECT message has been received, the GPRS attach procedure shallbe aborted and re-initiated immediately. If a routing area border is crossedwhen the ATTACH ACCEPT message is received but before an ATTACHCOMPLETE message is sent, the GPRS attach procedure shall be aborted andthe routing area updating procedure shall be initiated. If a P-TMSI was allocatedduring the GPRS attach procedure, this P-TMSI shall be used in the routing areaupdating procedure. If a P-TMSI signature was allocated together with the P-TMSI during the GPRS attach procedure, this P-TMSI signature shall be used in
the routing area updating procedure.
f) Power off
• If the MS is in state GMM-REGISTERED-INITIATED at power off, the GPRSdetach procedure shall be performed.
E l
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 31/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 31
Example:
Abnormal cases
g) Procedure collision
• If the MS receives a DETACH REQUEST message from the network in stateGMM-REGISTERED-INITIATED, the GPRS detach procedure shall be progressedand the GPRS attach procedure shall be aborted. If the cause IE, in the DETACHREQUEST message, indicated a “reattach request”, the GPRS attach procedureshall be progressed and the DETACH REQUEST message shall be ignored.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 32/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 32
Example:
State machine
• General state machine
idle
attached
context
active
attach
detach
activate
context
deactivatecontext
detach
mobility
management
send/receive
SMS
mobility
management
send/receive
SMS
send/receive
data
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 33/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 33
Example:
State machine
• Simple state machine
IDLE
REGISTRA-
TION PEND.
GMMREG-ATTACH-REQ
GMMREG-ATTACH-CFN
GMMREG-
ATTACH-REJ
GMMREG-DETACH-CFN
REGISTERED
GMMREG-DETACH
-IND
GMMREG-DETACH-REQ (power off)
GMMREG-DETACH-REQ
(not power off)
DE-
REGISTRA-
TION PEND.
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 34/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 34
Example:
State machine at MS
NULL RA-UPDATING-
INITIATED
DEREGISTERED
Enable
GPRS
DETACH requested
(not power off)
REGISTERED
Any state
DEREGISTERED-
INITIATED
ATTACH
requestATTACH rejected
DETACHrequested
(power off)
Network init. DETACH
requested
Lower layer failureATTACH
accept
RAU rejected
Network init. DETACH
implicit DETACH
DETACH accepted
Lower layer failureRAU
requested
RAU accepted
RAU failed
REGISTERED-
INITIATED
Disable
GPRS
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 35/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 35
Example:
State machine at network
GMM-DE-REGISTERED
- Network initiatedDETACH requested
GMM-REGISTERED
GMM-COMMON-PROCEDURE-INITIATED
GMM-DE-REGISTERED-
INITIATED
- COMMON procedurefailed
- Lower layer failure
- ATTACH proceduresuccessful
- MS initiated
DETACH requested- RAU rejected
- Iimplicit DETACH
- DETACH accepted- Lower layer failure
- COMMON proceduresuccessful
- ATTACH proceduresuccessful
- COMMON procedurerequested
- COMMON procedurerequested
8/12/2019 Signalling Prot
http://slidepdf.com/reader/full/signalling-prot 36/36
Tik-109/110.300 Fall 2000 © Hannu H. Kari Page 36
Links
• In English
• http://www.ee.umanitoba.ca/~blight/telecom.html
• In Finnish