SHOW US WHAT YOU’RE MAKING
/spotlightstores
@spotlightstores
SPOOKY HALLOWEEN FACE MASKS
PROJECT SHEET
SPOOKY HALLOWEEN FACE MASKS
WHAT YOU’LL NEED
• 30cm Cotton fabric
• Felt Sheet
• Scissors
• Pins
• Fabric Glue
• 60cm of Ribbon (4 pieces x 15cm)
INSTRUCTIONS
Step 1 – Download template and cut out 2 pieces for each layer of fabric. You should have 6 pieces in total.
Step 2 – Match the right sides of each layer together and sew along the curved edge with a 1cm seam allowance. Snip into the curved seam allowance with scissors.
Step 3 – Press the seams of each layer to one side and top stitch down. Repeat on each layer.
Step 4 – Layer the masks with right sides facing in. Pin and sew along the top and bottom edges with a 1cm SA.
Step 5 – Turn the mask right side out. Fold under the side edges 1cm and pin in place. Place the ties into the side seams.
Step 6 – Top stitch around entire mask edge to close side seams and secure the ties in place.
Step 7 – Draw and cut out your spooky decorations from the felt sheets. You could also use a cricut machine to cut out shapes if you have one.
Step 8 – Use the fabric glue to attach the felt to the mask. Allow glue to dry before wearing.
Step 9 – Repeat with other felt decorations to create a bunch of spooky masks! Happy Halloween!
EASY
The information on this project sheet is presented in good faith, but no warranty is given, nor results guaranteed. Quantities and selections may vary at each store. Copyright Spotlight 2020.
TEMPLATE
Face Mask
Cut 4
0
105
1cm Seam Allowance Included
Adult
Small
Adul
t/ Te
en
Yout
h
Yout
h Sm
all
cm
The information on this project sheet is presented in good faith, but no warranty is given, nor results guaranteed. Quantities and selections may vary at each store. Copyright Spotlight 2020.