Version 2.0 1 |2
AIO-STA-12
anchorage point for personal safety (SAP), fastening point for INNOTECH® lifeline and rail systems
optimal end or corner point for INNOTECH® lifeline systems
suitable for abseiling when used with EAP-ABP-10-30 (up to 500 mm)
low force transmission thanks to plastic deformability and high base stability
certifiedaccordingtothestateoftheart:
EN795:2012TYPAandC CEN/TS16415:2013 DIBt allgemeine bauaufsichtliche Zulassung (DIBt general building supervision approval)
AIO-STA-12 is a component of the INNOTECH lifeline systemand can be mounted on a wide range of substructures.
AIO-STA-12 Standard postBASE PLATE 300 X 300 MM IN AIO-LIFELINE SYSTEM (EN 795 C) Mountableon:concrete,hollowconcreteslab,trapezoidalsupportingsheet, steel construction, etc.Postheight:300/400/500/600/700/800mm,Ø48mmBaseplatedimensions:300x300x8mmMaterial:galvanisedsteel
Thermal insulation cover and sealing band can be found under accessories!Be sure to order appropriate fastening sets! (see below)Special lengths upon request!
Standard post AIO-STA-12 EN
Concrete Wood construction Trapezoidal sheet Steel construction
APPROVAL:
Z-14.9-732
INNOTECH® Arbeitsschutz GmbH,Laiz ing10,A-4656KirchhamT:+43761922122-0,F: -147,off [email protected] , www.innotech.at
AIO-STA-12
Version 2.0 2 |2
WOOD CONSTRUCTION
BEF-104CONCRETE (min. C20/25) – cracked and uncrackedMaterial:stainlesssteel(AISI316)Contents:4xanchorbolts,
FISCHERFAZII12/10A4
Boreholedepthmin.105mm(Ø12mm)!
BEF-107HOLLOW CONCRETE SLAB (min. C50/60, B4)Material:galvanisedsteelContents:8xhollowcoreanchor,FISCHERFHY-M10x52
8xhexboltM10x60(DIN933) 8xwasher(M10)
Hollow slab cross-section (concrete thickness) min. 30 mm!
2x BEF-209WOOD – SOLID WOOD (min. 80 mm)Material:galvanisedsteelContents:4xfasteningbolts(8x80mm)
4xwashers(coniform)Minimumthicknessofsolidwoodsurface80mm!
Use2xBEF-209incombinationwiththeAIO-STA-12post!Product:EAP-QUAD-11/AIO-STA-12
BEF-210WOOD – OSB Panel thickness (min. 22 mm)Material:galvanisedsteelContents:48xfasteningbolts(6x50mm)
12xwashers(coniform)OSB-panel thickness min. 22 mmProduct:AIO-STA-12
ADHESIVE ANCHOR4xM12threadedposts4xwashers4xM12lockingnutsor4xnutswithspringwashersPenetrationdepth:min.100mmInjectionmortar:FischerFISSB390S
HiltiHY200
CONCRETE
BEF-303TRAPEZOIDAL SUPPORTING SHEET, FASTENING FRAMEMaterial:galvanisedsteelDimensions:840x840x40mmSheetmetalthickness:min.0.6mm
foroptimalloaddistributionontrapezoidalsupporting sheet, widely varied useability
different possibilities to combine withBEF-303-1orBEF-303-3
STEEL CONSTRUCTION
TRAPEZOIDAL SHEET
WELDINGWeldingseammin.A5and80mmlongoneachbaseplateside
Removepowderorzinccoatingproperlybeforewelding.
STEEL SCREWS4xM12steelscrews,steelquality≥5.64xM12lockingnutsor4xnutswithspringwasher
use appropriate washers on the 4 corner boreholes
BEF-401-12STEEL CONSTRUCTION,COUNTER PLATE (150 x 150 x 8 mm) Material:galvanisedsteelMax.widthofsteelconstruction:105mm
BEF-307-1TRAPEZOIDAL SUPPORTING SHEET, STABILISATION BARMaterial:stainlesssteelPackage:2xsupportbar
4xborefastener 4xcentringwasher
Sheetmetalthickness:min.0.63mm
OnlyincombinationwithBEF-307orBEF-404tostabilizecorner-andendpoints!!
BEF-307-2OSB PANEL, SPECIAL ANCHOR BOLTMaterial:stainlesssteel(AISI304),plasticPackage:4xspecialanchorboltOSB-panelthickness:18mm-30mm
BEF-404TRAPEZOIDAL SUPPORTING SHEET, SCREW FASTENERMaterial:galvanisedsteelPackage:4xcounterplateincl.screwmaterial,sealingwasherSheetmetalthickness:min.0.7mmProduct:AIO-STA-12LimiteduseabilityintheAIOlifelinesystem(BEF-307-1)!
C 20/25
BEF-102CONCRETE (min. C20/25) – Solid concrete with evened surfaceMaterial:galvanisedsteelContents:4xanchorbolts,FISCHERFBN12/120+140
Special fastening - product-specific testing required!
APPROVAL:
Z-14.9-732
APPROVAL:
Z-14.9-732
APPROVAL:
Z-14.9-732
Concrete Wood construction Trapezoidal sheet Steel construction
INNOTECH® Arbeitsschutz GmbH,Laiz ing10,A-4656KirchhamT:+43761922122-0,F: -147,off [email protected] , www.innotech.at