Download - Tbs Erdung En
A good earthing system in accordance with DIN VDE 0185-3 (IEC 62305-3) is the basis of a good lightning
protection system. The lightning current safely deflected by the interception and arrester system is routed to the
ground. The equipotential bonding performs an additional task between the arresters and as an equipotential bon-
ding controller in passable areas.
224 TBS
Earthing systems
Principles from page 228
Products from page 230
225TBS
System overview from page 226
Earthing systemsSystem overview
226 TBS
Connection termin
Earth fixing point
Potential equalisationsystems from P.166
Conducter material from P. 228
from P.240
227TBS
Corrosion-proofing band from P.243
nal from P.239
1 m
Planning an earthing system
� Deep eartherA deep earther is an earther,which is generally integrated ver-tically and deep into the ground.The simplest solution for retrofit-ting a lightning protection system.
� Ring eartherA ring earther is a surfaceearther, which if possible isinstalled as a closed ring ata distance of 1.0 m and 0.5 mdeep into the ground around theexternal foundation of thebuilding. The better, although more expensive, solution for retrofitting a lightning protection system.
� Foundation eartherA foundation earther (acc. to TAB1974 specified for new buildings)is embedded into the concrete foundation of a building. It then also acts as a lightning protec-tion earther, if the lugs required for connecting the arresters pro-trude from the foundation.
The earthing system is part of theexternal lightning protection system,which routes the lightning currentinto the ground where it is to bedistributed. The key criteria for aneven lightning current distributionwithout dangerous surges occurringare form and dimensions.
In accordance with DIN VDE 0185Part 3 (IEC 60305-3) Section 4.4.1,a lower earthing resistance < 10 �is generally recommended. An earthing system can be constructed from one of the threearrangements described below. It is possible to connect different
earthing arrangements, althoughthe risk of corrosion must be takeninto account.Important notice: earthingsystems must be connected tothe equipotential bonding.
Deep eartherA deep earther (arrangement TypeA) is an earther that is generally inte-grated vertically and deep into theground.
As single earthers, a deep earther of9.0 m in length is recommended.This should be installed at a dis-tance of 1.0 m from the foundationof the building. As a minimumdimension (acc. to DIN VDE 0185Part 3 Fig. 2) a length of 2.5 m forvertical installation and 5 m for hori-zontal installation apply for Type Aearthers for lightning protectionclasses III and IV. The required earther lengths may be split intoseveral lengths connected in paral-lel. Depending on the soil condi-tions, deep earthers can be driveninto the ground by hand or by usingsuitable electric, petrol or pneumatichammers.
All deep earthers must be con-nected with a ring earther inside oroutside of the building and with alead to the PAS.
The following materials can beused:
� Rods from galvanised steel Ø 20 mm
� Rods from stainless steel Ø 20 mm
� Pipes from galvanised steel Ø 25 mm (2 mm wall thickness)
� Flat conductors from galvanisedsteel 30 x 3.5 mm
� Flat conductors from stainless steel 30 x 3.5 mm
In potentially corrosive areas, stain-less steel must always be used.Detachable connections in theground must be protected againstcorrosion (plastic corrosion protec-tion strip).
228 TBS
Cross-connectors from page 237
Corrosion protection strips from page 243
Round conductors from page 186
Attaching clips from page 242
Earthing rods from page 232
Striking points from page 233
Note: For deep earthers,a length of 9.0 m is recom-mended.
Ring earthers (surface earthers)Outside the building, at least 80% ofthe ring earther´s overall length mustbe in contact with the ground. Itmust be installed as a closed ring ata distance of 1.0 m and a depth of0.5 m around the external founda-tion of the building. A ring earther isan earther according to arrange-ment type B.
The following materials can beused:
� Flat conductor galvanised steel 30 x 3.5 mm
� Flat conductor stainless steel 30 x 3.5 mm
� Round conductor copper, Ø 8 mm
� Round conductor Ø 10 mm, galvanised steel
� Round conductor Ø 10 mm, stainless steel
In potentially corrosive areas, stain-less steel (V4A) must always beused. Detachable connections inthe ground must be protectedagainst corrosion (plastic corrosionprotection strip).
1 m
Foundation earthersA foundation earther is an eartherthat is embedded into the concretefoundation of a building. It acts asa lightning protection earther if thelugs required for connecting thearresters protrude from the founda-tion. The steel strip is to be attached/ connected to reinforcements at adistance of approx. 3 m. DIN 18014forms the basis for constructingexternal lightning protectionsystems.
Wedge connectors must not beinserted into the ground. In order toachieve a clean insertion, the use ofstrip holders is recommended forthe installation of foundation earthers. The holders must be inserted at a distance of approx. 2 m.
The following materials, amongothers, can be used for foundationearthers:
� Flat conductor galvanised steel 30 x 3.5 mm
� Flat conductor stainless steel 30 x 3.5 mm
� Round conductor copper, Ø 8 mm
� Round conductor Ø 10 mm, galvanised steel
� Round conductor Ø 10 mm, stainless steel
In potentially corrosive areas, stain-less steel should always be used atthe entry and exit points on the con-crete.
20 x 20 m
229TBS
Cross-connectors from page 237
Corrosion protection strips from page 243
Round conductors from page 186
Flat conductor from page 186
Diagonal terminals from page 239
Spacers from page 240
Flat conductors from page 186
Flat conductors from page 186
230 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
5052: Flat conductor/strip steel in rings
• Zinc layer: 225 g/m² (approx. 30 µm)
Application: foundation earthing, not laid in ground.
Flat conductor, steel galvanised Conduction material
5052
Type
Material symbol
St
Surfacefinish
FT
mm
Dimension B x H
25 x 3
ca. m
Normalring
100 5020 15 8
Item No.
ST FT/100
m
Pack.
59,700
borders
Weight
5052 St FT 25 x 3 30 5020 75 130 59,700 5052 St FT 30 x 5 80 5020 37 980 120,100 5052 St FT 40 x 4 75 5020 41 775 128,100 5052 St FT 40 x 5 50 5020 43 350 160,100 5052 St FT 30 x 3 30 5020 80 830 72,100 5052 St FT 30 x 3,5 30 5020 83 230 84,000 5052 St FT 30 x 3,5 FIX 50 5020 95 650 84,000
Price/% m
B H
5052: Flat conductor/strip steel in rings (conforms to DIN EN 50164-2)
• DIN 48801• Zinc layer: 500 g/m² (approx. 70 µm)
Area of application: Lightning protection and earthing
Flat conductor, steel galvanised for ground Conduction material
5052/ DIN
Type
Material symbol
St
Surfacefinish
FT
mm
Dimension B x H
20 x 2,5
ca. m
Normalring
100 5019 03 6
Item No.
ST FT/100
m
Pack.
41,000
borders
Weight
5052/ DIN St FT 30 x 3,5 100 5019 10 9100 84,000 5052/ DIN St FT 30 x 3,5 FIX 25 5019 11 730 84,000 5052/ DIN St FT 30 x 3,5 FIX 50 5019 13 350 84,000 5052/ DIN St FT 30 x 4 FIX 30 5019 20 630 97,200 5052/ DIN St FT 40 x 5 FIX 50 5019 30 350 162,000
Price/% m
B H
5052VA: Flat conductor/strip steel in rings
• Conforms to the requirements according to DIN V VDE V 0185-3, Table 8• From stainless steel, for use in potentially corrosive areas• From stainless steel V4A, for use in ground
Area of application: Lightning protection and earthing
Flat conductors, stainless steel Conduction material
5052-VA
Type
Material symbol
V2A
mm
Dimension B x H
30 x 3,5
ca. m
Normalring
50 5018 50 1
Item No.
V2A50
m
Pack.
82,500
borders
Weight
5052-VA
V4A
30 x 3,5
50 5018 70 6
V4A
50
95,200
Price/% m
B H
Prices according to DEL notation; see material references.FL20/Cu: Flat conductor/strip steel in coils (to DIN EN 50164-2)
Version: E-Cu S7 F24 softArea of application: Lightning protection and earthing
Flat conductor, copper Conduction material
FL20/Cu
Type
Material symbol
Cu
mm
Dimension B x H
20 x 2,5
ca. m
Normalring
45 5021 80 4
Item No.
Cu45
m
Pack.
44,500
borders
Weight
Price/% m
HB
-T Tordier qualityRD ...-ALU: Round conductor
• Conforms to the requirements according to VDE V 0185-305, (IEC 62305)• Aluminium• RD 8/ALU: halbhart (E-AlMgSi0.5 to DIN 48801)• RD 8/ALU-T: tordierbar (E-AlMgSi0.5 to DIN 48801)• RD 10/ALU: Rein-Aluminium(E-Al to DIN 48801)
Round conductor, aluminium Conduction material
RD 8/ALU
Type
Material symbol
Al
mm
Nominalsize Ø
8
ca. m
Normalring
150 (± 7,5 m)
mm²
Cross-section
50 5021 28 6
Item No.
Al150
m
Pack.
13,500
borders
Weight
RD 8/ALU-T Al 8 150 (± 7,5 m) 50 5021 29 4150 13,500 RD 10/ALU Al 10 95 (± 4,5 m) 78 5021 30 895 21,000
Price/% m
D
231TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)Earthing systems
Always indicate the article number when ordering.
Earthing systems
RD ...: Round cable (to DIN EN 50164-2)
• Fulfils the requirements to VDE 0185-305 (IEC 62305)• RD 10 can also be used in earth• Galvanised steel• Zinc coating: 50 µm average value (approx. 350 g/m²)
Round conductor, steel galvanisedConduction material
RD 8
Type
Material symbol
St
mm
Nominalsize Ø
8
ca. m
Normalring
125 (± 2 m)
mm²
Cross-section
50 5021 08 1
Item No.
ST FT/125
m
Pack.
40,000
borders
Weight
RD 10 St 10 80 (± 2m) 78 5021 10 380 63,000
Price/% m
D
RD ...Cu: Round conductor
• Conforms to the requirements according to VDE V 0185-305, (IEC 62305)
Round conductor, copperConduction material
RD 8/Cu
Type
Material symbol
Cu
mm
Nominalsize Ø
8
ca. m
Normalring
100 (± 2 m)
mm²
Cross-section
50 5021 48 0
Item No.
Cu100
m
Pack.
45,000
borders
Weight
RD 10/Cu Cu 10 50 (± 2 m) 78 5021 50 250 70,000
Price/% m
D
RD ...-VA: Round conductor
• Conforms to the requirements according to VDE V 0185-305, (IEC 62305)• From stainless steel V4A, for use in ground
Round conductor, stainless steelConduction material
RD 8/V2A
Type
Material symbol
V2A
mm
Nominalsize Ø
8
ca. m
Normalring
100 (± 2,5 m)
mm²
Cross-section
50 5021 21 9
Item No.
V2A100
m
Pack.
40,000
borders
Weight
RD 10/V2A V2A 10 50 (± 2,5 m) 78 5021 22 750 63,000
RD 8/V4A
V4A
8
100 (± 2,5 m)
50 5021 63 4
V4A
100
40,000
RD 10/V4A V4A 10 50 (± 2,5 m) 78 5021 64 250 63,000
Price/% m
D
RD ...: Round conductor
• Conforms to the requirements according to VDE V 0185-305, (IEC 62305)• With PVC sheathing
Round conductor with PVC sheathingConduction material
RD 8/PVC
Type
mm
Nominalsize Ø
8/11
Material symbol
Al 5021 33 2
Item No.
Al100
m
Pack.
20,000
borders
Weight
Price/% m
RD ...: Round conductor
• Conforms to the requirements according to VDE V 0185-305, (IEC 62305)• With PVC sheathing
RD 10/PVC
Type
Material symbol
St
Surfacefinish
FT
ca. m
Normalring
75 (+/- 2 m)
mm²
Cross-section
78 5021 16 2
Item No.
ST FT/75
m
Pack.
67,200
borders
Weight
Price/% m
Prices according to DEL notation; see material references.S9/Cu: Rope
• Standard ring approx. 100 m• 7 Ø 3 mm individual wires (overall cross-section 50 mm²)• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
RopeConduction material
S9/Cu
Type
mm
Dimen-sion d
9
Material symbol
Cu 5021 65 0
Item No.
Cu100
m
Pack.
44,500
borders
Weight
Price/% m
D
232 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
219/.. ST: Earthing rod connection for standard applications:
• High corrosion resistance• Zinc support 70 µm • With peg and bore for linking together• Round pegs with two knurls• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
Earthing rod system ST Deep earther and plate earther
219/20 ST
Type
mm
Length
1500
mm
Outer-Ø
20 5000 75 0
Item No.
ST F/5
pcs
Pack.
360,000
kg/% pc
Weight
219/25 ST 1500 25 5000 76 95 573,000
Price/pc
”LightEarth" earthing rod
• Expandable earthing rod system for erecting earthing connections type A) • High corrosion protection with reinforced zinc layer• Also suitable for difficult soil conditions• The LightEarth earthing system is connected using the pre-mounted sleeve • Satisfies requirements according to DIN VDE 0185-305 (IEC 62305)• For use with antenna earthing systems, lightning earthing systems, etc.
LightEarth earthing rod Deep earther and plate earther
LE-Erder
Type
mm
Length
1500
mm
Outer-Ø
25 5000 30 0
Item No.
ST FT/5
pcs
Pack.
220,000
kg/% pc
Weight
LE-Erder 1000 25 5000 29 75 157,600
Price/pc
”LightEarth" earthing rod
• Expandable earthing rod system for erecting earthing connections type A) • High corrosion protection with reinforced zinc layer• Also suitable for difficult soil conditions• The LightEarth earthing system is connected using the pre-mounted sleeve • Satisfies requirements according to DIN VDE 0185-305 (IEC 62305)• For use with antenna earthing systems, lightning earthing systems, etc.
Stainless steel LightEarth earthing rod Deep earther and plate earther
LE-Erder
Type
mm
Length
1500
mm
Outer-Ø
25 5000 33 0
Item No.
V2A5
pcs
Pack.
235,000
kg/% pc
Weight
Price/pc
219/..BP: Earthing rod connection with high contact force
• DIN 48852, Form Z, ”BP“ system (Bundes Post)• Very good contacting properties with lead ball in the bore hole• With peg and bore for linking together• V4A version, high-grade stainless steel (Material no. 14571) • Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
Earthing rod system BP Deep earther and plate earther
219/20 BP-VA
Type
mm
Length
1000
mm
Outer-Ø
20 5000 85 8
Item No.
V4A5
pcs
Pack.
250,000
kg/% pc
Weight
219/20 BP-VA 1500 20 5000 86 65 365,000
Price/pc
219/..BP: Earthing rod connection with high contact force
• DIN 48852, Form Z, ”BP“ system (Bundes Post)• Very good contacting properties with lead insert in the bore hole• With peg and bore for linking together• Cu version with a 0.5 mm copper sheath• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
219/20 BP-Cu
Type
mm
Length
1500
mm
Outer-Ø
20 5000 50 5
Item No.
ST Cu/10
pcs
Pack.
365,400
kg/% pc
Weight
Price/pc
233TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)Earthing systems
Always indicate the article number when ordering.
Earthing systems
219/..: Earthing rod connection in robust design
• DIN 48852, Form Z, ”OMEX“ system• With peg and bore for linking together• With hardened steel pins• Version FT with zinc support, min. 60 µm• Conforms to the requirements according to DIN VDE 0185-305 (IEC 62305)
Earthing rod system OMEXDeep earther and plate earther
219/20
Type
mm
Length
1500
mm
Outer-Ø
20 5000 01 7
Item No.
ST FT/5
pcs
Pack.
365,400
kg/% pc
Weight
219/20 2000 20 5000 20 35 491,400
219/25
1500
25 5000 02 5
ST F/
5
577,200
Price/pc
D
2000
44
LE point Ø 25 mm: Striking point for mounting on earthing rods
• Suitable for LightEarth system
Impact point for earthing rod systemDeep earther and plate earther
LE- Spitze
Type
Material symbol
St
Surfacefinish
FT 3041 40 9
Item No.
ST FT/10
pcs
Pack.
10,000
kg/% pc
Weight
Price/pc
45
Ø 25
Ø 20
1819/..BP: Striking point for mounting on earthing rod connection
• Suitable for ST and BP system
1819/20BP
Type
Ø mm
For deepearth
connection
20 3041 21 2
Item No.
TG FT/10
pcs
Pack.
3,500
kg/% pc
Weight
1819/25BP 25 3041 95 610 6,700
Price/pc
D
1819/...: Striking point for mounting on earthing rod connection
• Suitable for OMEX system• DIN 48852, Form Sp
1819/20
Type
Ø mm
For deepearth
connection
20 3041 20 4
Item No.
TG FT/10
pcs
Pack.
3,300
kg/% pc
Weight
1819/25 25 3041 25 510 4,900
Price/pc
D
LE head: Striking head for driving earthing rods using hand-held hammer
• Suitable for LightEarth system• Hardened
Impact head for earthing rod systemDeep earther and plate earther
LE- Kopf
Type
3042 30 8
Item No.
ST FT/1
pcs
Pack.
70,000
kg/% pc
Weight
Price/pc
1.5
80
10
45°
Ø 40
1820/..: Hardened for driving earthing rod connections with hand-held hammer
• Suitable for ST, BP and OMEX systems• Hardened• DIN 48852, Form SP
1820/20
Type
Ø mm
For deepearth
connection
20 3042 20 0
Item No.
ST1
pcs
Pack.
62,600
kg/% pc
Weight
1820/25 25 3042 25 11 70,000
Price/pc
50
ø 20
234 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
2500/...: Hammer insert for vibration hammers
• Manufactured by Cobra BBM 47 SPA-Super, Tex11 and COBRA 248• Fits earthing rod system ST, BP and OMEX• Hardened
Hammer insert for earthing rod Deep earther and plate earther
2500/20
Type
Ø mm
For deepearth
connection
20 3043 20 7
Item No.
ST1
pcs
Pack.
120,800
kg/% pc
Weight
2500/25 25 3043 25 81 143,100
Price/pc
2510/20: Hammer insert for vibration hammers
• Manufactured by Atlas Copco, type FB 60 S-Super• Fits earthing rod system ST, BP and OMEX• Hardened
2510/20
Type
Ø mm
For deepearth
connection
20 3043 31 2
Item No.
ST1
pcs
Pack.
310,000
kg/% pc
Weight
Price/pc
6.5
ø 47
ø45
9516
0
407
2520/...: Hammer insert for vibration hammers
• Manufactured by Wacker BHF 25, BHF 30S, EHU 25/220• Fits earthing rod system ST, BP and OMEX• Hardened
2520/20
Type
Ø mm
For deepearth
connection
20 3043 70 3
Item No.
ST1
pcs
Pack.
197,000
kg/% pc
Weight
2520/25 25 3043 75 41 197,000
Price/pc
ø2 7
240
25
80
33.8
2530/...: Hammer insert for vibration hammers
• Manufactured by Bosch USH 10, HSH 10• Fits earthing rod system ST, BP and OMEX• Hardened
2530/20
Type
Ø mm
For deepearth
connection
20 3043 40 1
Item No.
ST1
pcs
Pack.
125,000
kg/% pc
Weight
2530/25 25 3043 45 21 125,000
Price/pc
19
2.5
2737
240 13
0
Hammer inserts for vibration hammers of other types and manufacturer on request.2535/...: Hammer insert for vibration hammers
• Manufactured by Hilti TE 52/42, TE 72/60, TE 92• Fits earthing rod system ST, BP and OMEX• Hardened
2535/20
Type
Ø mm
For deepearth
connection
20 3043 91 6
Item No.
ST1
pcs
Pack.
100,000
kg/% pc
Weight
2535/25 25 3044 91 21 100,000
Price/pc
ø 16.9
17.9
240
560
1026
2536/....: Hammer insert for vibration hammers with SDS- Max/TEY- mounting
• Fits earthing rod system ST, BP and OMEX• Hardened
2536/20
Type
Ø mm
For deepearth
connection
20 3044 90 4
Item No.
ST1
pcs
Pack.
63,000
kg/% pc
Weight
2536/25 25 3044 83 11 61,000
Price/pc
235TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)Earthing systems
Always indicate the article number when ordering.
Earthing systems
LE hammer: Hammer insert for vibration hammers
• Suitable for LightEarth system• 3043606 for Wacker (BHF 25, BHF 30S)• 3043610 for Hilti (TE 52/42, TE72/60, TE92)• 3043614 for Bosch (USH 10, HSH 10)• 3043602 for SDS-Max• 3043618 for Atlas Copco (Sechskantaufnahme)• 3043628 for Bosch GSH27/UH27 (11304) / HS28 (12314)
Hitachi H65SD Makita HM 1500B / HM1800
• Hardened
Hammer insert for earthing rodDeep earther and plate earther
LE- Hammer
Type
Material symbol
St
Version
Wacker 3043 60 6
Item No.
ST1
pcs
Pack.
132,000
kg/% pc
Weight
LE- Hammer St Hilti 3043 61 01 76,000 LE- Hammer St Bosch 3043 61 41 87,000 LE- Hammer St SDS-Max 3043 60 21 76,000 LE- Hammer St Atas Copco 3043 61 81 76,000
LE- Hammer
ST
—
3043 62 8
ST
1
200,000
Price/pc
Prices according to DEL notation; see material references.101/A...: Interception rods, rounded ends
• Ø 16 mm solid material• Both ends rounded
Earth entry rodsDeep earther and plate earther
101/A
Type
Material symbol
St
mm
Length
1500
mm
Nominalsize Ø
16 5400 15 5
Item No.
ST FT/10
pcs
Pack.
240,000
kg/% pc
Weight
101/A-Cu
Cu
1500
16 5400 62 7
Cu
10
272,100
Price/% pc
L
16Ø
101/F...: Interception rod with connection tabs
• With 2 attaching holes Ø 12 mm• One end rounded
101/F-1500
Type
Material symbol
St
Surfacefinish
FT
mm
Length
1500
mm
Nominalsize Ø
16 5424 15 1
Item No.
ST FT/10
pcs
Pack.
240,000
kg/% pc
Weight
101/F-2000 St FT 2000 16 5424 20 810 320,000
Price/% pc
200: Both ends rounded
200VA1500
Type
mm
Dimen-sion L
1500
mm
Nominalsize Ø
16 5420 50 4
Item No.
V4A10
pcs
Pack.
242,000
kg/% pc
Weight
200
1500
16 5420 15 6
ST FT/
10
242,000
Price/% pc
ø 16
L
204/KS: Multi-purpose ground insertion rod
• With flange-welded connection lug Rd 10 (final metre)• With mounted heat-shrunk hose (corrosion proofing)
204/KS
Type
Material symbol
St
Surfacefinish
F
mm
Length
2000
mm
Nominalsize Ø
16/10 5430 01 1
Item No.
ST F/1
pcs
Pack.
230,000
kg/% pc
Weight
204/KS St F 2500 16/10 5430 06 21 310,000
Price/pc
ø 10
16
L10
00
400
400
236 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
Prices according to DEL notation; see material references.204/KL: Ground insertion rod, steel, hot-dip galvanised with separating piece 223/DIN andconnector 5002/DIN
204/KL-CU: Ground insertion rod, copper with separating piece 223/MS-DIN and connector5002/MS DIN
Earth entry rods Deep earther and plate earther
204/KL
Type
mm
Fit
Rd 8-10 5430 15 1
Item No.
ST10
pcs
Pack.
260,700
kg/% pc
Weight
Price/% pc
L
ø 1625
213/DIN: Profile earthing rod connection
• Cross-profile 50 x 50 x 3 mm • With connecting strap• 1 through hole Ø 13 mm • 2 through holes Ø 11 mm
Profile rod earth connection Deep earther and plate earther
213/1000/DIN
Type
mm
Length
1000 5003 00 8
Item No.
ST FT/5
pcs
Pack.
240,500
kg/% pc
Weight
213/1500/DIN 1500 5003 01 65 364,500 213/2000/DIN 2000 5003 02 45 488,400 213/2500/DIN 2500 5003 03 23 612,400 213/3000/DIN 3000 5003 04 03 736,400
Price/pc
4
L
22
110
60
11
13
213/..../M: Profile earthing rod connection
• With 2 m strip steel section FL30 x 3.5 • With 2 through holes Ø 11 mm• Does not conform to DIN 48852, Part 1
213/1000/M
Type
mm
Length
1000 5003 25 3
Item No.
ST FT/3
pcs
Pack.
403,700
kg/% pc
Weight
213/1500/M 1500 5003 26 13 527,600 213/2000/M 2000 5003 28 83 651,600 213/2500/M 2500 5003 29 63 783,800 213/3000/M 3000 5003 31 83 899,500
Price/pc
ø 11
L
22
30
3.5
213/..../F: Profile earthing rod connection
• With 2 m round conductor lugs Rd 10• Does not conform to DIN 48852, Part 1
213/1500/F
Type
mm
Length
1500 5003 77 6
Item No.
ST FT/3
pcs
Pack.
486,900
kg/% pc
Weight
213/2000/F 2000 5003 78 43 610,900
Price/pc
ø 10
L
1816/F: Earthing plate as individual earth electrode
• With 3 m strip steel section FL30 x 3.5 • With 2 attaching holes Ø 11 mm
Earthing plate Deep earther and plate earther
1816/F
Type
mm
DimensionB x L x S
500 x 500 x 3 5009 21 9
Item No.
ST FT/1
pcs
Pack.
800,000
kg/% pc
Weight
1816/F 500 x 1000 x 3 5009 22 71 1329,300 1816/F 1000 x 1000 x 3 5009 23 51 2700,000
Price/pc
S=3
L
B
ø 11
30FL x3,5
22
237TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)Earthing systems
Always indicate the article number when ordering.
Earthing systems
255: Cross-connector for flat conductor
• Fit: Max. FL30 x FL30• With separator plate• Installed with 4 hex-head screws M6 x 20 (F)
Cross-connectorsConnection material
255
Type
mm
Fit
max. FL30
mm
Dimen-sion A
52
mm
Dimen-sion B
52
Material symbol
St
Surfacefinish
FT 5314 51 8
Item No.
ST FT/20
pcs
Pack.
16,650
kg/% pc
Weight
Price/% pc
52
52
255 A: Cross-connector for flat conductor
• Fit: Max. FL30 x FL30• Without separator plate• Installed with 4 hex-head screws M6 x 20 (F)
255 A
Type
mm
Fit
max. FL30
mm
Dimen-sion A
60
mm
Dimen-sion B
60
Material symbol
St
Surfacefinish
FT 5314 53 4
Item No.
ST FT/20
pcs
Pack.
11,500
kg/% pc
Weight
Price/% pc
B
A
256/A-DIN ..: Cross-connector for flat conductor
• Fit: max. FL30 x FL30, max. FL40 x max. FL40 (F)• Without separator plate• Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8• DIN 48845, Form H
256/A-DIN 30
Type
mm
Fit
max. FL30
mm
Dimen-sion A
60
mm
Dimen-sion B
60
Material symbol
St
Surfacefinish
FT 5314 65 8
Item No.
ST FT/10
pcs
Pack.
27,800
kg/% pc
Weight
256/A-DIN 40 max. FL40 80 80 St FT 5314 66 610 38,800
Price/% pc
B
A
256/A-DIN ..: Cross-connector for flat conductor
• Fit: max. FL30 x FL30, max. FL40 x max. FL40 (F)• Without separator plate• Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8• DIN 48845, Form H
256/A-DIN 30
Type
mm
Fit
max. FL30
mm
Dimen-sion A
60
mm
Dimen-sion B
60
Material symbol
V2A
—
Surfacefinish
5314 72 0
Item No.
V2A25
pcs
Pack.
27,800
kg/% pc
Weight
Price/% pc
B
A
256/DIN ..: Cross-connector for flat conductor
• Fit: max. FL30 x FL30 (256/DIN 30), max. FL40 x FL40 (256/DIN 40)• With separator plate• Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8
256/DIN 30
Type
mm
Fit
max. FL30
mm
Dimen-sion A
60
mm
Dimen-sion B
60
Material symbol
St
Surfacefinish
FT 5314 61 5
Item No.
ST FT/10
pcs
Pack.
35,860
kg/% pc
Weight
256/DIN 40 max. FL40 80 80 St FT 5314 62 310 54,650
Price/% pc
B
A
252/FL DIN: Cross-connector for round conductor and flat conductor
• Fit: Rd 8-10 x FL30• Installed with 4 hex-head screws M8-25, 4 hexagonal nuts M8 (F)• DIN 48845, Form F
252/FL DIN
Type
mm
Fit
8-10 x FL30
Material symbol
St
Surfacefinish
F 5312 65 5
Item No.
ST F/25
pcs
Pack.
28,500
kg/% pc
Weight
Price/% pc
60
60
238 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
Prices according to DEL notation; see material references.252/...: Cross-connector for round conductor
• Fit: Rd 8-10 x Rd 8-10• With separator plate• Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8
Cross-connectors Connection material
252/DIN
Type
mm
Fit
Rd 8-10
Material symbol
St
Surfacefinish
FT 5312 31 0
Item No.
ST FT/25
pcs
Pack.
33,530
kg/% pc
Weight
252/Cu-DIN
Rd 8-10
Cu
—
5312 41 8
Cu
25
38,940
Price/% pc
60
60
Prices according to DEL notation; see material references.252/...: Cross-connector for round conductor and interceptor/ground insertion rods
• Fit: Rd 8-10 x Rd 16• With separator plate• Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8• DIN 48845, Form E
252/DIN
Type
mm
Fit
Rd 8-10 x 16
Material symbol
St
Surfacefinish
FT 5312 34 5
Item No.
ST FT/25
pcs
Pack.
38,800
kg/% pc
Weight
252/Cu-DIN
Rd 8-10 x 16
Cu
—
5312 44 2
Cu
25
43,985
Price/% pc
60
60
253: Cross-connector for round conductor
• Fit: Rd 8-10 x Rd 8-10• Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8 (F)
253
Type
mm
Fit
Rd 8-10
Material symbol
St
Surfacefinish
F 5312 60 4
Item No.
ST F/25
pcs
Pack.
30,700
kg/% pc
Weight
Price/% pc
60
60
253: Cross-connector for round conductor • Fit: Rd 8-10 x Rd 16• Installed with 4 hex-head screws M8 x 25 and 4 hexagonal nuts M8 (F)
253
Type
mm
Fit
Rd 8-10 x 16
Material symbol
St
Surfacefinish
F 5312 80 9
Item No.
ST F/25
pcs
Pack.
29,800
kg/% pc
Weight
Price/% pc
60
60
250/...: Cross-connector for round conductor and flat conductor
• Fit: Rd 8-10 x Rd 8-10• Fit: Rd 8-10 x FL30• Fit: FL30 x FL30• Installed with 2 hex-head screws M8 x 20 (F)
250
Type
mm
Fit
Rd 8-10/FL30
Material symbol
St
Surfacefinish
FT 5312 90 6
Item No.
ST FT/25
pcs
Pack.
10,260
kg/% pc
Weight
250/VA
Rd 8-10/FL30
V2A
—
5312 92 2
V2A
25
10,260
Price/% pc
58.5
5
58.5530
239TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)Earthing systems
Always indicate the article number when ordering.
Earthing systems
250/A...: Diagonal clamps
• For reinforced steels Ø 6-22 mm and flat conductor 50 x 4• Installed with screws M10 x 40• AS version with screws M10 x 20• Simple installation with open slot
Diagonal clampConnection material
250/A-FT
Type
Surfacefinish
FT
mm
Dimen-sion L
40
mm
Fit
Rd 6-22/max. FL50 5313 01 5
Item No.
ST FT/25
pcs
Pack.
28,800
kg/% pc
Weight
250/A-VA
—
40
Rd 6-22/max. FL50 5313 02 3
V2A
25
28,800
250/AS-FT
FT
20
Rd 6-22/max. FL50 5313 03 1
ST FT/
25
26,000
Price/% pc
10
30
88L
250/A-BO: Diagonal clamps
• For reinforced steels Ø 6-22 mm and flat conductor 50 x 4• Installed with screws M10 x 25• Simple installation with open slot• With flange-welded bolts M10 x 40, inc. 2 washers and 2 nuts
250/A-BO
Type
Material symbol
St
—
Surfacefinish
mm
Fit
Rd 6-22/max. FL50 5313 06 6
Item No.
ST25
pcs
Pack.
30,000
kg/% pc
Weight
Price/% pc
259/A...: Parallel clamp
• For connecting reinforced steels Ø 10-20 mm• Installed with screws M10 x 40
Parallel clampConnection material
259/A
Type
Material symbol
St
Surfacefinish
FT
mm
Fit
Ø 10-20 5315 51 4
Item No.
ST FT/25
pcs
Pack.
18,800
kg/% pc
Weight
259/A-VA
V2A
—
Ø 10-20 5315 52 2
V2A
25
18,800
259/A St
St
—
Ø 10-20 5315 55 7
ST
25
18,800
Price/% pc
9
40
62
35
1813/DIN: Variable earth connector
• Suitable for connecting Rd 10 x FL30, FL30 x FL30• Quick installation using hex-head screw M10 x 20 (F)
Variable earthing terminalConnection material
1813/KL
Type
mm
Fit
FL30- FL30 x Rd 8-10 5014 42 5
Item No.
ST FT/50
pcs
Pack.
18,000
kg/% pc
Weight
Price/pc
35
40
32
50
32
1818: Connection terminal
• For connecting round conductor Rd 8-10• With 1 hex-head screw M12 x 40, 1 hexagonal nut M12 and 1 lock washer, stainless steel
Connection terminalConnection material
1818
Type
mm
Fit
-10,08 5012 01 5
Item No.
ST FT/10
pcs
Pack.
17,600
kg/% pc
Weight
Price/% pc5040
1814/...: Connection terminal
• For reinforced steels with diameters 8–14 mm and FL 30x5• Simple installation with open slot• Side suspension option
1814/FT
Type
5014 46 8
Item No.
ST25
pcs
Pack.
20,000
kg/% pc
Weight
1814/ST 5014 47 625 20,000
Price/pc
240 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
205/B: Earth fixing point
• For connecting to earthing systems, arresters and reinforcements• With cover from plastic• Contact plate: Ø 79 mm from high-grade stainless steel (V4A) • Ø 10 mm clamping bolt • Including plastic cover for simple installation
Earthing fixed point Connection material
205/B-M10-VA
Type
Thread
M10 5420 00 8
Item No.
V4A25
pcs
Pack.
25,500
kg/% pc
Weight
205/B-M12-VA M12 5420 01 625 25,500
Price/pc
ø18
ø10
202
302M10/M12
79
5011: End piece
• For attaching to steel structures or bolting to earthing fixed points• For attachments: Round conductor Rd 8-10 and flat conductor FL30 x 3.5• 2x attaching hole Ø 11 mm• 1x attaching hole Ø D mm
End piece Connection material
5011
Type
Material symbol
St
Surfacefinish
FT
Ø mm
Dimen-sion D
11 5304 99 7
Item No.
ST FT/50
pcs
Pack.
7,064
kg/% pc
Weight
5011/VA- 10
V4A
—
11 5334 93 4
V4A
50
7,064
5011/VA -12 V4A — 13 5334 94 250 7,048
Price/% pc
1813/DIN: Wedge connector
• DIN 48834, Form A• Suitable for connecting Rd 10 x FL30, FL30 x FL30• Quick installation with high contact force
Wedge connector Connection material
1813/DIN
Type
mm
Fit
10/FL30 x FL30 5014 21 2
Item No.
ST FT/5
pcs
Pack.
20,000
kg/% pc
Weight
Price/pc
57
100
79
1811: Spacer for professional laying of round conductors and specialist conductors according toDIN VDE 0185-305 (IEC 62305)
• DIN 48833• Suitable for mounting round conductors Rd 10 or specialist conductors FL30 x 3.5
Spacer Connection material
1811
Type
mm
Fit
10/FL30 x 3,5
mm
Length
250 5014 01 8
Item No.
ST FT/25
pcs
Pack.
19,000
kg/% pc
Weight
1811/L 10/FL30 x 3,5 400 5014 02 625 31,500
Price/pc
L
110
31
12.5
410
1807: For expansion joints, for laying foundation earthing connections
• With 2 hex-head screws M10 x 30 • 2 hexagonal nuts M10, 2 plain washers, hot-dip galvanised steel and 2 serrated washers,stainless steel
Expansion piece Connection material
1807
Type
5016 14 2
Item No.
Al25
pcs
Pack.
27,000
kg/% pc
Weight
Price/pc
5 55
40
10.5
245 60325
1805/...: For connecting different earthing systems
• With 2 mounting holes Ø 11 mm• 1805/2: With 4 attaching holes• 1805/4: With 8 attaching holes• 1805/6: With 12 attaching holes
Earthing connection block Connection material
1805/2
Type
mm
Length
200 5016 02 9
Item No.
ST FT/10
pcs
Pack.
54,800
kg/% pc
Weight
1805/4 302 5016 03 720 77,000 1805/6 404 5016 04 510 97,100
Price/pc
5
255 (5x51)
55
404
314
50
359
241TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)Earthing systems
Always indicate the article number when ordering.
Earthing systems
1805/...: For connecting different earthing systems
• With 2 mounting holes Ø 11 mm• 1805/2: With 4 attaching holes• 1805/4: With 8 attaching holes• 1805/6: With 12 attaching holes
Earthing connection blockConnection material
1805/2 VA
Type
mm
Length
200 5016 09 6
Item No.
V4A10
pcs
Pack.
54,800
kg/% pc
Weight
1805/4 VA 302 5016 11 820 77,000 1805/6 VA 404 5016 12 610 97,100
Price/pc
5
255 (5x51)
55
404
314
50
359
113/BZ...: Conductor holder with over-piece
• With female thread M8 or through hole for wood screws• For flat conductor FL30• Sliding over-piece for quick installation
Cable bracketConnection material
113/BZ-FL
Type
Material symbol
Zn
Surfacefinish
FT 5230 44 6
Item No.
Zn FT/100
pcs
Pack.
6,280
kg/% pc
Weight
113/BZ-HD-FL Zn FT 5230 46 2100 7,000
Price/% pc
58
2020
ø 27
835: Conductor holder
• For round conductor Rd 8-10 and flat conductor FL30 x 3.5• Supplied with hex-head wood screw 6 x 70 and straddling dowel 910/N
835
Type
mm
Fit
Rd 8/10/ FL30x3,5 5033 20 9
Item No.
ST FT/1
pcs
Pack.
12,100
kg/% pc
Weight
Price/% pc
18
3045
.5
831/..: For flat conductors
• Fit: FL30 and FL40• With mounting hole Ø 6.5 and 2 hex-head screws M6 x 16 (F)
Spacer clipConnection material
831/30
Type
mm
Fit
max. FL30
mm
Dimen-sion B
54 5032 03 2
Item No.
ST FT/25
pcs
Pack.
3,580
kg/% pc
Weight
831/40 max. FL40 65 5032 04 025 3,894
Price/% pc
831/..M6: For flat conductors
• Fit: FL30 and FL40• With attaching thread M6 and 2 2 hex-head screws M6 x 16 (F)
831/30 M6
Type
mm
Fit
max. FL30
mm
Dimen-sion B
54 5032 23 7
Item No.
ST FT/25
pcs
Pack.
3,712
kg/% pc
Weight
831/40 M6 max. FL40 65 5032 24 525 3,880
Price/% pc
832/..: For flat conductors
• Fit: FL30 and FL40• With mounting hole Ø 7 mm and 2 hex-head screws M6 x 16
832/30
Type
mm
Fit
max. FL30
mm
Dimen-sion B
55 5032 53 9
Item No.
ST FT/25
pcs
Pack.
7,416
kg/% pc
Weight
832/40 max. FL40 65 5032 54 725 7,612
Price/% pc
242 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
833: For flat conductors
• Fit: FL30• With mounting hole 6.2 x 22 mm• With 2 cylinder screws M6 x 16 and over-piece from hot-dip galvanised steel• Bottom section from polyamide, black
Spacer clip Connection material
833
Type
mm
Fit
max. FL30
mm
Dimen-sion B
60 5033 03 9
Item No.
ST FT/25
pcs
Pack.
4,228
kg/% pc
Weight
Price/% pc
2012
.5
18
60
370/..: For flat conductors
• Fit: FL30• With spacer and cylinder screws M6 x 16 (G)• With wood screw
370/H
Type
mm
Fit
max. FL30
mm
Dimen-sion B
55 5025 20 6
Item No.
ST FT/100
pcs
Pack.
10,200
kg/% pc
Weight
Price/% pc
ø 6.5
5215
.520
55
710/..: For flat conductors
• Fit: FL30 and FL40• With steel straddling dowel Ø 10 mm, spacer and 2 cylinder screws M5 x 14 (G)
710/30
Type
mm
Fit
max. FL30
mm
Dimen-sion B
52 5028 03 5
Item No.
ST G/25
pcs
Pack.
5,044
kg/% pc
Weight
710/40 max. FL40 62 5028 04 325 5,360
Price/% pc
ø 10
14
ø30
B
3613
708/..: For flat conductors
• Fit: FL30 and FL40• With 2 cylinder screws M5 x 12 (G) and over-piece• With square pin
708/30 SP
Type
mm
Fit
max. FL30
mm
Dimen-sion B
52 5030 02 1
Item No.
ST G/50
pcs
Pack.
3,148
kg/% pc
Weight
Price/% pc
B
1453
.5
ø 4.75
708/..: For flat conductors
• Fit: FL30 and FL40• With 2 cylinder screws M5 x 12 (G) and over-piece• With wood screw
708/30 HG
Type
mm
Fit
max. FL30
mm
Dimen-sion B
52 5030 23 4
Item No.
ST G/50
pcs
Pack.
3,148
kg/% pc
Weight
708/40 HG max. FL40 52 5030 24 250 3,474
Price/% pc
ø 6.5
B
51.5
14
2710/..: Attaching clip for earthing rod connnector
• ST, BP, OMEX and LightEarth systems• On round conductor Rd 8-10• Including connector 5001/DIN
Connection clip Connection material
2710/20
Type
Material symbol
St
Surfacefinish
FT
Ø mm
For deepearth
connection
20
mm
Dimen-sion A
84
mm
Dimen-sion B
114 5001 21 8
Item No.
ST FT/5
pcs
Pack.
39,900
kg/% pc
Weight
2710/25 St FT 25 89 119 5001 22 65 42,300
Price/pc
40
A
B
243TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)Earthing systems
Always indicate the article number when ordering.
Earthing systems
2730/..: Attaching clip for earthing rod connnector
• ST, BP, OMEX and LightEarth systems• On flat conductors• Including hex-head screw for attaching flat conductors
Connection clipConnection material
2730/20
Type
Material symbol
St
Surfacefinish
FT
Ø mm
For deepearth
connection
20
mm
Dimen-sion A
84
mm
Dimen-sion B
114 5001 40 4
Item No.
ST FT/5
pcs
Pack.
35,900
kg/% pc
Weight
2730/25 St FT 25 89 119 5001 41 25 38,800
2730/20-VA
V2A
—
20
84
114 5001 36 6
V2A
5
35,900
Price/pc
AB
40
Prices according to DEL notation; see material references.2735/20 Cu: Attaching clip for earthing rod connnector
• ST, BP, OMEX and LightEarth systems• On flat and/or round conductors Rd 8-10
2735/20 Cu
Type
Material symbol
Cu
—
Surfacefinish
Ø mm
For deepearth
connection
20
mm
Dimen-sion A
80
mm
Dimen-sion B
114 5001 46 3
Item No.
Cu5
pcs
Pack.
24,900
kg/% pc
Weight
Price/pc
114
80
30
ø11
2760: Multi-purpose attaching clip for earthing rod connnector
• Suitable for attaching round conductors Rd 8-10 or flat conductors to FL40• With separator plate• Installed with 2 hex-head screws M10 x 30 and 2 hexagonal nuts M10
2760/20
Type
Surfacefinish
FT
mm
Dimen-sion A
101
Ø mm
For deepearth
connection
20
mm
Fit
Rd 8-10/FL40 5001 64 1
Item No.
ST FT/5
pcs
Pack.
32,400
kg/% pc
Weight
2760/25 FT 110 25 Rd 8-10/FL40 5001 66 85 38,400
Price/pc
2760: Multi-purpose attaching clip for earthing rod connnector
• Suitable for attaching round conductors Rd 8-10 or flat conductors to FL40• With separator plate• Installed with 2 hex-head screws M10 x 30 and 2 hexagonal nuts M10
2760/20-VA
Type
Material symbol
V2A
—
Surfacefinish
mm
Dimen-sion A
101
Ø mm
For deepearth
connection
20
mm
Fit
Rd 8-10/FL40 5001 61 7
Item No.
V2A5
pcs
Pack.
32,400
kg/% pc
Weight
Price/pc
Prices according to DEL notation; see material references.2745/.. Ms: Terminal
• For earthing rod connector Ø 20 or conductors 95 mm²• For round conductor attachments Rd 7-12.5 with hex-head screws M10 x 25, copper (Cu)
2745/20 Ms
Type
Material symbol
CuZn
Surfacefinish
Cu
Ø mm
For deepearth
connection
20
mm
Fit
7-12,5/S95 mm² 5001 56 0
Item No.
CuZn Cu/5
pcs
Pack.
16,000
kg/% pc
Weight
Price/pc
H
40
25
356: Plastic corrosion-proofing band
• Approx. 1.2 mm thick• Width: 50 mm and/or 100 mm, petroleum jelly with cotton fabric insert
Plastic corrosion-proofing bandHolders and accessories
356
Type
mm
Width
50
m
Length
10 2360 05 5
Item No.
1
pcs
Pack.
71,500
kg/% pc
Weight
356 100 10 2360 10 11 122,200
Price/pc
244 TBS
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
Earthing systems
Always indicate the article number when ordering.
Earthing systems
357: Plastic corrosion-proofing band
• Approx. 1.3 mm thick• Width: 50 mm and/or 100 mm, bitumen with polyester support fabric
Plastic corrosion-proofing band Holders and accessories
357
Type
mm
Width
50
m
Length
10 2360 55 1
Item No.
1
pcs
Pack.
56,600
kg/% pc
Weight
357 100 10 2360 60 81 140,500
Price/pc
L = element length366: For flat conductors
• Fit: FL30
Strip steel crimp Holders and accessories
366
Type
mm
Length
35
mm
Fit
max. FL30 5059 35 6
Item No.
ST FT/100
pcs
Pack.
1,737
kg/% pc
Weight
366 50 max. FL30 5059 49 6100 2,300
Price/% pc
311/N-... Number plates
• To identify the point of separation to DIN 48821• Suitable for universal labelling (e.g. stamped numbers)
Number plates Holders and accessories
311/N-CU
Type
mm
Fit
10 / FL30RD 8
Material symbol
Cu 3049 20 5
Item No.
Cu50
pcs
Pack.
6,400
kg/% pc
Weight
311/N-VA
10 / FL30RD 8
V2A 3049 22 1
V2A
50
5,600
311/N-ALU
10 / FL30RD 8
Al 3049 25 6
Al
50
2,500
311/N-CU
RD 16 / FL30
Cu 3049 30 2
Cu
50
6,800
311/N-VA
RD 16 / FL30
V2A 3049 32 9
V2A
50
6,400
311/N-ALU
RD 16 / FL30
Al 3049 34 5
Al
50
2,800
Price/% pc
245
02 T
BS
-Kat
alog
200
8 / e
n / 2
8/05
/200
8 (L
LExp
ort_
0059
6)
TBS