1 The firm must be GST & NTN registered in case of exemption, proof should accompany thequotation.
2 Minimum validation period of bids will be 90 days.
3 Warranty condition should be distinctively and elaborately mentioned in the quotation for eachitem.
4 Quotations are to be submitted up to October 28, 2013 at 1:00 PM and tender will be opened at02:00 PM on the same day.
5Payments will be made through cross cheque after deduction of all type of taxes as per prevailingrates. After receipt satisfactory report of the Inspection Committee and acceptance of the items asper given specification.
6 Rates must be inclusive of all taxes to be payable by supplier which will be deducted at the timeof final payment.
7 The chairman purchase committee reserved the rights to accept or reject any part of the entiretendered without assigning any reason.
8Earnest Money (refundable) at least @ 2% of the full value of items must be attached with thebid in shape of CDR/Demand Draft/Pay Order/Banker’s Cheque in the name of DISTRICTMANAGER TEVTA RAWALPINDI.
9 Copy of Sales Tax / Income Tax registration must be attached with request, on companyletterhead, for issuance of Tender.
10 Tender would be rejected if the amount of CDR is less than 2% of the quoted price.
11 10% security would be deducted from the bill at the time of payment and the same will bereleased after warranty period.
12 Tenders must be submitted separately for each technology along with earnest money/call depositReceipt or otherwise tender will be rejected.
13 Brochure of the item to be quoted must be attached.14 Black listed firms will not be entertained.15 In case of any query or information contact on telephone No: 051-9290347-48
TERMS AND CONDITIONS
Page 1
3. Wire Guage Standard (imported) 0-45 SWG 01 No
UK/ USA/ Japan/ Taiwan/ or Equivalent
10
4. Micrometer Digital 0-25 mm (Inter/.Ext.)
UK/ USA/ Japan/ Taiwan/ or Equivalent
10
5. Knife Electrician Folding Type 4” Blade
UK/ USA/ Japan/ Taiwan/ or Equivalent
10
Kelvin’s Double Bridge Portable:- Range 0.1 to 110 Ohm- Built-in Galvanometer with protectionPhase Angle Meter Portable.- Display 3 digits with polarity + (Lead) and – (Lag)- Voltage Range 10-400 V
- Current Range 0.5 – 20 APotential Transformer:Primary Rating 220/440/2200/3300 VSecondary Rlating 110 VLux Meter Digital:Range: 0-20000 luxMax/Data hold functionBacklit LCD displayPower Supply AC/DC Digital:Output AC Range: 0 to 220V, 500mAOutput DC Range: 0 to 220V, 10mAInput Voltage: 220/380V ACWith protection.Reheostat Air Core Resistance:-100W 2.503A-200W 2.5-3 A-32W 2.5-3 APotentiomete/Resistance Substitution Box:
Qty
10UK/ USA/ Japan/ Taiwan/ or Equivalent
GCT TAXILA
Remarks Total Cost with GST ITEMS Specification Unit
Rate
ELECTRICAL TECHNOLOGY
COMPARATIVE STATEMENT
BASIC LAB.NO.1 WIRING LAB
GST
UK/ USA/ Japan/ Taiwan/ or Equivalent
31.
34
1
17.
UK/ USA/ Japan/ Taiwan/ or Equivalent
Sr #
BASIC LAB.NO.228.
Total Cost without
Total Lab No.1
14. 5
22
UK/ USA/ Japan/ Taiwan/ or Equivalent
UK/ USA/ Japan/ Taiwan/ or Equivalent
5
11.
1
UK/ USA/ Japan/ Taiwan/ or Equivalent
UK/ USA/ Japan/ Taiwan/ or Equivalent
5
Page 2
Qty Remarks Total Cost with GST ITEMS Specification Unit
Rate GSTSr #
Total Cost without
Low Range: 15 to 10,000 OhmsHigh Range9:17 PM 15,000 to 10,000,000ohms
Two 12-Step rotary switches allow selection of 24 values
37 Test and Fault detector UK/ USA/ Japan/ Taiwan/ or Equivalent
2
38 Bench Growler UK/ USA/ Japan/ Taiwan/ or Equivalent
4
AC Voltage Transducer:
Input Voltage9:23 PM 100V, 100/√3V, 110V, 110√3V, 230V, 400VAccuracy class: 0.2%Output: 0-5, 0-20mA,0-5, 0-10VAC Current TransducerInput Current: 5A or 1AAccuracy class: 0.2%Rated Frequency: 50 or 60 HzBurden : <0.5VAOutput: 0-5, 0-20mA, 0-5, 0-10V
42 Power Transducer Single Phase
UK/ USA/ Japan/ Taiwan/ or Equivalent
6
43 Power Line Transducer 3-Phase
UK/ USA/ Japan/ Taiwan/ or Equivalent
6
Frequency Transducer:Input Frequency Range : 45-55 Hz, 55-65 Hz, 45-65 Hz, 360-440 HzInput Voltage: 110V, 100/√3V, 110V, 110/√3V, 230V, 400V
Accuracy class: 0.2%
6
Equivalent
UK/ USA/ Japan/ Taiwan/ or Equivalent
641
644
40 UK/ USA/ Japan/ Taiwan/ or Equivalent
UK/ USA/ Japan/ Taiwan/ or Equivalent
Page 3
Qty Remarks Total Cost with GST ITEMS Specification Unit
Rate GSTSr #
Total Cost without
Multi-Range: 60-120-300-600mAScale: 120mm to 135mm with mirror under layAccuracy: 2.5%Ammeter AC/DC PortableMulti-Range: 60-120-300-600mA&1.2-3-6AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%Ammeter AC/DC PortableMulti-Range: 60-120-300-600mA&1.2-3-6AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%
66. Thermocouple Wire K type 1600oC
UK/ USA/ Japan/ Taiwan/ or Equivalent
16
67. Bearing Puller ½” – 2.5” inner dia
UK/ USA/ Japan/ Taiwan/ or Equivalent
8
69. Spring Balance 50 Kg UK/ USA/ Japan/ Taiwan/ or Equivalent
4
-
60. 5
POWER LAB.NO.3
59.
Total Basic Lab No.2
10UK/ USA/ Japan/ Taiwan/ or Equivalent
UK/ USA/ Japan/ Taiwan/ or Equivalent
Equivalent
Page 4
Qty Remarks Total Cost with GST ITEMS Specification Unit
Rate GSTSr #
Total Cost without
3 Basic Electronic Trainer:To perform the following experiments:Ohm’s law, Series and parallel resistive circuits, Electricity units and symbols, DC current, switches and relays, Power supplies and measuring instruments, Kirchhoff’s law, Laws combination of resistances, Faraday’s Law, Self inductance of coil, Laws of combination of capacitors, Power factor measurements, Measurement of power phase sequence, Measurement of reactive power, Measurement of Power factor improvement, Thevenin’s theorem, Superimposition theorem, Rheostats and Potentiometers,
UK/ USA/ Japan/ Taiwan/ or Equivalent
1
4 Basic Electronic Trainer:For performing following experiments:PN JunctionHalf and Full wave rectifiersDiode Characteristics, Voltage Doubler Zener Diode, Voltage Stabilization circuitsDiode Limiters, Clipping and Clamping CircuitsUse of UJT, SCR, Diac and TriacesNPN, PNP TransistorsUse of FET and MOSFET, J-FET,
UK/ USA/ Japan/ Taiwan/ or Equivalent
1
Page 5
Qty Remarks Total Cost with GST ITEMS Specification Unit
Rate GSTSr #
Total Cost without
10 Galvanometer Portable:Current Sensitivity: 0.9 A/divVoltage Sensitivity: 540 V/divInternal/External resistance
UK/ USA/ Japan/ Taiwan/ or Equivalent
10
22 Watt hour Meter Single phase Analog:Voltage: 220-240VCurrent: 10/40AFrequency: 50Hz
Pakistan/ China or Equivalent
3
35 Ammeter AC/DC Portable:Multi-Range: 3-7.5-15-30AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%.
UK/ USA/ Japan/ Taiwan/ or Equivalent
5
36 Ammeter AC/DC Portable:Multi-Range: 3-7.5-15-30AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%.
UK/ USA/ Japan/ Taiwan/ or Equivalent
5
47 Battery Charger:Output Voltage: 12VDC, 8AInput Voltage: 220VAC, 50Hz.
UK/ USA/ Japan/ Taiwan/ or Equivalent
4
54 Syncroscope 96 x 96 UK/ USA/ Japan/ Taiwan/ or Equivalent
4
57 Potentiometer/Resistance Substitution Box:Low Range: 15 to 10,000 OhmsHigh Range: 15,000 to 10,000,000 OhmsTwo 12-Step rotary switches allow selection of 24 values.
UK/ USA/ Japan/ Taiwan/ or Equivalent
4
Page 6
Qty Remarks Total Cost with GST ITEMS Specification Unit
Rate GSTSr #
Total Cost without
68 Spring Balance Capacity 50kg
UK/ USA/ Japan/ Taiwan/ or Equivalent
4
69 AC Current Transducer:Input Current: 5A or 1AAccuracy class: 0.2%Rated Frequency: 50 or 60HzBurden: <0.5VAOutput: 0-5, 0-20mA, 0-5, 0-10V
UK/ USA/ Japan/ Taiwan/ or Equivalent
5
70 AC Voltage Transducer:Input Voltage: 100V, 100/ 3V, 110V, 110/ 3V, 230V, 400VAccuracy class: 0.2%Output: 0-5, 0-20mA, 0-5, 0-10V
UK/ USA/ Japan/ Taiwan/ or Equivalent
5
71 Power Line Transducer UK/ USA/ Japan/ Taiwan/ or Equivalent
5
72 Frequency Transducer:Input Frequency Range: 45 – 55Hz, 55 – 65Hz, 45 – 65Hz, 360 – 440HzInput Voltage: 100V, 100/ 3V, 110V, 110/ 3V, 230V, 400VAccuracy Class: 0.2%Burden: <0.5VAOutput measuring range: 0 – 200mA, 4 – 20mA, 0 – 10V
UK/ USA/ Japan/ Taiwan/ or Equivalent
5
73 3-Phase Transducer 5kVA variable
UK/ USA/ Japan/ Taiwan/ or Equivalent
2
74 Single phase Transducer 3kVA
UK/ USA/ Japan/ Taiwan/ or Equivalent
2
75 Current Transformer (portable):
UK/ USA/ Japan/ Taiwan/ or
5
Page 7
Qty Remarks Total Cost with GST ITEMS Specification Unit
Rate GSTSr #
Total Cost without
77 Protection Relays (Analog / Digital):Study the operating characteristics of the following protection relays:Atrracted Armature type relay, Buchholz’s relay , Plunger type relay, Induction over current relay, Induction reverse power relay, Induction relay, Impedance relay, Reactance relay, Beam relay, Frequency relay, Static relays, Amplitude-comparator relay, Phase comparator relay, Over voltage, Under voltage relay, Static over-current relay, Static distance relay, Differentials protection relay (Current balance, Voltage balance), Photoelectric relay, Thermal relay.
UK/ USA/ Japan/ Taiwan/ or Equivalent
2
80 Motor winding machine (local) manual
Pakistan/ China or Equivalent
2
- Total Power Lab No.3
Page 1
1 BASIC MACHINE SHOP
1 SHAPING MACHINE (SHAPER)Stroke length = 400-450mmNo. of speeds = 2-8Strokes per mint = 20-130Vertical Travel of tool slide = 150mm or greaterTable automatic feed (5) = 0.2 to 2 mm/strokeMotor rating 3 ph/440v/50 Hz = 1.25-1.5 KWShaper Vice (Swivel Base) = 250-300 mm width of jaws. Note: - Along with all standard accessories machine handles, set of spanner. Ellen Key set and complete in all resprct.
Pak Made or Equivalent
2
3 PEDESTAL GRINDERBall bearing mounted spindle, suitable for tool grinding, protection glass/clear plastic eye shield with lamp.Grinding wheel = 250 x 30 x 25 mmSpindle speed = 2500-3000 rpmMotor rating 3 ph/440V/50 Hz = 600-750 WattQuick angle setting of = 30-90 degreeattachment Wheel dresser star = Standardtype / Diamond Complete in all respect.
Pak /UK/ USA or Equivalent
2
TOOL BITSMade of high speed steel cobalt alloy hardened and ground
/PkUK/ GERMANY or
Equivalent
1/2” x 1/2” x 8” or 12x12x100mm
50
3/8” x 3/8” x 8” or 10x10x200mm
50
1/4" x 1/4” x 8” or 6 x6 x63 mm
50
Total Rate with
GCT TAXILAMECHANICAL TECHNOLOGY
Total:
COMPARATIVE STATEMENT
SpecificationITEMS QtySr #
6
Total Rate without
Unit Rate GST Remarks
Page 2
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
8 Plotter LaserJet A-0 Size Singapore/ UK or Equivlent
1
2 Portable Type Multirange VoltmeterAC/DC Voltage Range 6 0-120-300-600 VClass of accuracy 0.5 %Scale length 1 20 mm to 135 mmFrequency 4 0…60 … 400 HzMirror under-lay, Moving iron type with delicate hair like spring provided with conical edge and jewel. Along with standard Accessories and operational manual in English.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
10
4 Portable Type Multirange Electrodynamic Power Meter (Singe Phase)Class of accuracy 0.5 %Scale length 1 20 mm to 135 mm Scale linear calibratedAC/DC current ranges 0.5-1-2.5-5 AAC/DC Voltage ranges 12-24-48-120-240-480 VMirror under-lay, Electrodynamic movement with delicate hair like spring provided with conical edge and jewel. Along with standard Accessories and
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
Total:-
AUTO CAD LAB
Electricity and PLC LAB
Page 3
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
11 3pt & 4pt Starter 440V with complete fitting DC motor
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
15 Phase Sequence failure & under voltage & over voltage control relay solid state
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
16 Star Delta Starter 7.5hp-England20 amp-440 v. 3 phase
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
17 Transformer 10 Kva RegulatorInput 3-phase 400/440 50 HzApproximate 3 ranges step up & 3 ranges step down
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
18 Meggar 1000 Megohm 1000 V (Manual)
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
10
19 Calibrated meter box UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
4
22 Industrial Electronics Trainer Kits25 pin connections sampling velocity 1-50000, digital signal simulation, no of channels 16 input range+ / - 16 volt maximum output 835 ks /sComplete in all respect and relevant hardware to conduct the all practicals. 1. Study and connections of PN diodes as rectifiers2. Connecting PN Diode as half-wave and full-wave3. Connecting PN Diode as bridge Rectifiers with filter4. Study of Power Supply
5. Connections and biasing
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
Page 4
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
13PYROMETERS (Radiation Type)2500 ºC Optical Type
PAKISTAN/UK/ GERMANY Or
Equivalent1
15
CO2 MOLDING APPARATUSCO2 Gas Cylinder with Pressure Regulator Rubber hoses 8 meter, Spray Gun
PAKISTAN/UK/ GERMANY Or
Equivalent 1
16
ELECTRIC HAND GRINDER (PORTABLE) Suitable for 10 inch grinding wheel
PAKISTAN/UK/ GERMANY Or
Equivalent2
17Steel Wire Brush = 2 inch Good quality
PAKISTAN/UK/ GERMANY Or
Equivalent10
19
Molding Box 12″ x12″ x 4″ inchM. S plate thickness=6 mm with hand grip
PAKISTAN/UK/ GERMANY Or
Equivalent 16
20
Molding Box 18 x 18 x 6 inch Plate = 6mm with hand grip
PAKISTAN/UK/ GERMANY Or
Equivalent16
21 Slick 10 inch Mild Steel
PAKISTAN/UK/ GERMANY Or
Equivalent16
22 Gate Cutter S.S Sheet Swg -20
PAKISTAN/UK/ GERMANY Or
Equivalent16
23 Sand Lifter 10 inch
PAKISTAN/UK/ GERMANY Or
Equivalent16
24 Trovel 8”
PAKISTAN/UK/ GERMANY Or
Equivalent16
25 Shovel with wooden Handle
PAKISTAN/UK/ GERMANY Or
Equivalent16
30Foudry Riddles 10,12,16,18 mesh dia 18 inch set of 4 pcs
PAKISTAN/UK/ GERMANY Or
Equivalent16
31 Strike off BarsWooden, size 1x 2x 20 inch
PAKISTAN/UK/ GERMANY Or
Equivalent16
32Wooden Rammer 12 inchWith pien end and butt end dia 3 inch
PAKISTAN/UK/ GERMANY Or
Equivalent16
33
Sprue PinsAluminumTapper, Dia ½, ¾ inch length 8 inch
PAKISTAN/UK/ GERMANY Or
Equivalent32
Ladle CarrierFor carrying and poring from
PAKISTAN/UK/ GERMANY Or
Page 5
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
42Vent wire length 200 mm, dia 5mmWith sharp end and Eye end
PAKISTAN/UK/ GERMANY Or
Equivalent16
43Molding BoardDiar wood, 20X20X1 inch with supporting Ribs
PAKISTAN/UK/ GERMANY Or
Equivalent16
48 Leather Apron With 18″ length 36″
PAKISTAN/UK/ GERMANY Or
Equivalent26
49Safety ShoesSuitable and common size ‘Heavy leather’
PAKISTAN/UK/ GERMANY Or
Equivalent50
50 Leather slaves pairs
PAKISTAN/UK/ GERMANY Or
Equivalent50
-
1 Instruments BoxSpecial Compass Set
PAKISTAN/UK/ GERMANY Or
Equivalent2
2Tee Square(600 mm)Transparent
PAKISTAN/UK/ GERMANY Or
Equivalent2
3Set SquareTransparent medium size (300 mm)
PAKISTAN/UK/ GERMANY Or
Equivalent2
4TemplatesCircle Square, Hexagon, Triangle (03 each)
PAKISTAN/UK/ GERMANY Or
Equivalent2
5 French CurvesGood Quality, medium size
PAKISTAN/UK/ GERMANY Or
Equivalent2
6 Clutch Pencil (0. 5 mm)
PAKISTAN/UK/ GERMANY Or
Equivalent5
8 Sharpener Machine PAKISTAN/UK/ GERMANY Or
Equivalent5
9 Portable Drawing Board(3’x2’ with scale)
PAKISTAN/UK/ GERMANY Or
Equivalent5
-
A. GAS WELDING
Total:
DRAWING HALL - DRAFTING LAB
Total:
WELDING SHOP
Page 6
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
21
Gas Welding TableMade of Mild Steel angle Iron. 75x75x 6 Approximate height 900Firebricks top / MS Bars
PAKISTAN/ UK Or Equivalent
2
-
B. FORGING SHOP
1
Black Smith ViceForged steel with griping surfaces heat-treated tough facesJaws 125 mm Length with opening capacities from 80 to 100 mm and additional leg.
PAKISTAN/UK/ GERMANY Or
Equivalent2
FORGING HAMMERS.Sledge hammer with handle = 5 KG 5Cross peen hammer = 500 gramsWith handle
10Straight peen hammer = 500 gramswith handle
10
4
Hot Chisel Forged steel hardened impact resistant head.Length = 150 mmWidth = 20mm
PAKISTAN/UK/ GERMANY Or
Equivalent 10
5
Cold Chisel Set.Made of forged steel hardened ground cutting edge. Hexagonal shapes with handle.Width of cutting edge = 35 mm.
PAKISTAN/UK/ GERMANY Or
Equivalent10
7
Top and Bottom fullerHardened tool steel with 6 cm 6 cm size and top fuller with handle.
PAKISTAN/UK/ GERMANY Or
Equivalent5
8Top and Bottom Swages.Hardened tool steel 6 cm x 6 cm
PAKISTAN/UK/ GERMANY Or
Equivalent5
9AnvilHardened polished face50 Kg
PAKISTAN/UK/ GERMANY Or
Equivalent2
10
Forging / Heating chamberwith blower, Hood etc. Heating by Natural gas bower.
PAKISTAN/UK/ GERMANY Or
Equivalent 2
Total Gas Welding:
3
PAKISTAN/UK/ GERMANY Or
Equivalent
Page 7
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
10
Cut-off of MachineSuitable to cut M.S flat,pipe,Angle iron etc Down hand feed with clamping viceDisc wheel (0 x T x Bore) = 60x4x 5mmMotor rating watts = 1800 or1.8 KW 230/50 HzMotor speed rpm =
PAKISTAN/UK/ GERMANY Or
Equivalent
1
12Hand ShearManual Type with long handle, 300mm Blade Length
PAKISTAN/UK/ GERMANY Or
Equivalent1
- -
2
JIG SAW:-Stand model solid cast iron construction for working both timber and metal. Accurately machined table and can be tilted. Crank shaft housing totally enclosed and suitable for various saw blades.Table size = 250 x 250 to 300 x 300mm.Sawing height = 45-50 mm. (Soft timber) = 8-10 mm (Hard timber)Sawing depth = 500-600 mm.Sawing blade speed Stroke/mint= 600,850Motor sating
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
6
COMBINE BELT AND DISC SANDER:-Suitable for sanding and polishing workTable length = 550-600 mm.Belt width and length = 200x200
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
PEDESTAL GRINDERBall bearing mounted spindle, suitable for tool grinding, protection glass/clear plastic eye shield with
Total Welding:
WOOD WORK SHOP
Total:
Page 8
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
15
MITRE BOX SAW:-With frame saw, graduated scale, lockable at 45˚ and 90˚ angle, base plate laminated wood, equipped with rubber sheet.Table length = 450 mm.Blade length = 565 mm.Cutting width right angle =
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
20
CIRCULAR PLANE:-Flexible adjustable sole for concave & convex surface iron fastened by means of cam lever locking device, knurled screw & lever for fine depth of cut and lateral adjustments. Width of cutter = 45 mm.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
10
22
ROUTER PLANE:-Two knobs for holding, vertical blade adjustment.Blade width = 10-12.Over all length =
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
25
MORTISE CHISEL:-Hard plastic handle, Hard and ground steel.Width = 6, 8, 10 mm.Over all length with handle = 300 mm.Set of 3 pcs
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
10
26
TURNING CHISEL:-Hard wood handle, hard steel cutting bladeWidth = 10, 14, 20, 30 mm. Length with handle = 400 mm.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
10
30
RUBBER MALLET:-Hard rubber mallet with wooden handle high class finish.Dimension = Dia 60 x Length 60 mm.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
10
BAR CLAMP:-Made from T-section, back stop is positioned by means a UK/JAPAN /
Page 9
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
40
TRAMMEL:-Polished steel flat rule with guide way, Graduated in mm / inches Adjustable hardened points.Length of beam =
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
6
41
FOLDING RULE:-Made form anodized aluminium. Graduated on both sides.Length = 1 m.Width = 15 mm.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
45
SOLID CENTER AUGER BIT:-With combination shank for use with bit brace.Diameter = 6, 8, 10, 12 mm.Shank diameter = 6.5 mm.Flute length = 100, 100, 115, 115 mm.Over all length = 165, 165,
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
46
CENTER BITS:-Round shank with flat contact surface.Diameter = 6, 18, 10, 12 mm.Shank diameter = 5, 6, 6, 7 mm.Overall length = 165, 165,
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
-
2
HOOK RULE:-Stainless steel/chromium steel, tempered, hook fitted at zero end, fine quality.Size (mm) = 300.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 12
3
FOLDING RULE:-Made of wood / Teflon Minimum number of folds = 4.Maximum number of folds = 12 Size (mm) = 600.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 12
Total:
METROLOGY LAB
Page 10
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
15
CAST IRON SURFACE PLATE:-Made of close grain cast iron high quality finish. Length x Width x Thickness (mm) =300x300x25
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 2
16
GLASS SURFACE PLATE:-High quality finish. Length x Width x Thickness (mm)=300x300x25
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
19
CUBES:-Made of stainless steel cast iron tool steel. Size (mm) = 50x50x50, 100x100x100.Tolerance (mm) = ±
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 2
23
SPIRIT LEVEL:-Suitable for horizontal, vertical, inclined level checking.Size (mm) =
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
10
25
ENGINEER’S PARALLEL:-Made of tool steel high quality finish. Size (LxWxT)(mm) =
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
32
VERNIER MICROMETER:- Carbide tip anvil and spindle face, thermal insulation frame, wooden/ plastic box.Range (mm) = 0-25.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 5
33
PLUG MICROMETER (INTERCHANGE ABLE ANVIL TYPE):-Range (mm) = 12-16, 16-20, 20-25, 3 anvils = At 120 degree angle.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 2
34
PLUG MICROMETER (FIX ANVIL TYPE):-Range (mm) = 50-60.3 anvils = 120 degree angle.LC (mm) = 0.005.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 2
35
SCREW THREAD MICROMETER:-Carbide tipped face anvil & spindle, shape of anvil and
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
Page 11
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
43
DIAL PROTRACTOR:-Stainless steel high finish clear graduation.Angle setting (degrees) = 0-180.Dial graduation (degrees) = 1/12.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 12
44
VERNIER BEVEL PROTACTOR:-Stainless steel chrome finish, with magnifying glass.Angle setting (degrees) = 0-180.Dial graduation (degrees) =
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 5
45
SINE BAR:- Made of high grade steel chrome finish hardened and ground.Distance between rollers (mm) = 150.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 6
47
SURFACE GAUGE:-Adjustable rocker arm, double end scriber and fine adjusting screwBase size (LxWxT) (mm) = 90x50x30.Stainless steel spindle length (mm) =260.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
6
53
ELECTRONIC DIGITAL CALIPER:-Spindle and anvil faces carbide tip, zero setting, LCD display, power on/off, dual conversion mm/inch.Working range (mm) = 0 - 150.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
5
54
ELECTRICAL COMPARATOR:-High precision sensor, stain chrome finish, corrosion resistance, friction free spindle, made of stain less steel, hardened, with two limit contacts.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
55
MECHANICAL COMPARATOR:-Cable release, with probe, mechanism consist of lever, gear segment, friction free, with put backlash, hardened
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
Page 12
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
28
SURFACE PLATE:-Made of cast iron, highly polished and flat surface.Width of plate (mm) = 600.Length of plate (mm) = 600
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 2
40
TIN SNIP (CURVED):-Suitable for cutting 22 gauge sheet metal, hardened and ground blades, spring joint.Blade size (mm) = 50 or 100.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 5
41
ANVIL:-Made of cast steel hardened face and horn, square hardy hole.Weight (Kg) = 50.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
51
SCREW DRIVER SET:-With change bale screw drivers flat, phlips, stubby etc. made of chromium vanadium steel, magnetic blade standard size.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 2
55
BENDING ROLLERS (POWER OPERATED):-Gear wheel enclosed in steel safe guard, push button control, all rollers highly polished & ground, upper roller adjustableMaximum sheet thickness (mm) = 4Working length (mm) = upto 1500.
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent
1
56
FOOT SHEARStrong Cast and Fabricated BodyShearing width (mm) = 1000Shearing thickness (mm) =
UK/JAPAN / GERMANY
/TAIWAN Or Equivalent 1
-
HYDRAULICS AND HYDRAULIC MACHINES
Total:
Page 13
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Fluid Friction in Pipes with Hydraulic BenchWith VenturimeterThis unit consists of:i. Smooth bore pipes of various diameters (6mm, 10mm and 17mm)ii. An artificially roughened pipeiii. A 90o bendiv. A 90o elbowv. A 45o elbowvi. A 45o “Y”vii. A 90o “T”viii. A sudden enlargementix. A sudden contractionx. A gate valvexi. A globe valvexii. An in-line strainerxiii. A venturi made of Perspexxiv. An orifice meter made of Perspexxv. Pitot Static Tubexvi. Manometers (1m)
THAILAND/INDONESHIA/UK or
Equivalent
• Determination of critical Reynold’s numberHead loss measurements using U-tube manometer and mercury U-tube manometerWith all accessories and Instructional Manual COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST
2 Bernoulli’s Theorem Demonstration Apparatus
Sump tank 120 -170 Litre capacityVolumetric tank capacity 35-40 LitreCentrifugal pump 60-90 LitreWith Stop watch
THAILAND/INDONESHIA/UK or
Equivalent
1 -
1 - 1
Page 14
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
3 Orifice Discharge Apparatuswith all Instructional manual and all standard accessoriesExperimental Capabilities:• Determination of the contraction and velocity coefficient of different orifices• Calculation of the orifices discharge coefficientThis unit consists of:• A cylindrical acrylic tank which has an orifice fitted at the base• A traverse assembly is provided to allow a pitot tube to be positioned anywhere in the jet.• A wire is attached to the pitot tube which can traverse across the jet (To accurately measure the jet diameter and the vena contracta diameter in
THAILAND/INDONESHIA/UK or
Equivalent
1 -
4 Apparatus of “Energy Losses in Bends”The energy losses in bends and fittings designed for investigation of energy losses in pipe bends and fittings, including valves.Experimental Capabilities:• Measure the losses in the devices as related to flow rate• Calculate the loss coefficients as related to velocity head• Compare the pressure drop across each device.COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR
THAILAND/INDONESHIA/UK or
Equivalent
1 -
Page 15
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
MULTI PUMP TEST RIGThe apparatus should be configure on a single bench unit and plug and play type with Built in Service Tank and all accessories.• Built in service tank made of clear acrylic• Close cycle operation• Experiments manual with CDThe apparatus should be comprised of the below mentioned pumps preinstalled and connection.Centrifugal Pump Apparatus• Horizontal single stage pump in clear Plexiglas impeller hosing end suction single volute type• Variable speed control using variable frequency drive• Variable head Control
THAILAND/INDONESHIA/UK or
Equivalent
Axial Pump Apparatus• Horizontal single stage pump in clear Plexiglas Impeller hosing• Variable speed control using variable frequency drive• Variable head Control• Inlet and outlet pressure monitoring gauges• Variable area or digital flow meter for pump discharge flow rate measurementReciprocating Pump Apparatus• Horizontal pump in clear Plexiglas pumping head showing all working parts clearly• Variable speed control using variable frequency drive• Variable head feature
THAILAND/INDONESHIA/UK or
Equivalent
- 5 1
Page 16
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
MULTI TURBINE TEST RIG
The apparatus should be configure on a single bench unit and plug and play type with Built in Service Tank and all accessories.• Close cycle operation• Experiments manual with CDThe apparatus should be comprised of the below mentioned turbines preinstalled with interchangeable DC Dynamometer to use as Generator for load the apparatus should have variable resistive load.
The Control unit should have digital display for speed, Torque & Load.
For inlet and outlet pressure Borden tube manometer
THAILAND/INDONESHIA/UK or
Equivalent
Transparent turbine construction for operation View for all the turbines
Pelton Turbine
• Number of buckets: 16~18• Nozzle area: variable – 162 mm2 when fully open• Radius of runner to jet impact position: > 56.6 mm• Maximum speed: approximately 1800 rpm• Speed at maximum efficiency (approximately 80%): approx 1200 rpm• Power: 500Watts
- 6 1
Page 17
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Equipment set: (1 No)Training Package: Pneumatics Basic LevelThis training package includes all the components required for training in the fundamentals of pneumatic control technology. Components have the patented Quick Fix mounting system, pneumatic connections on the easily-accessible upper side of the components, and Quick Star fittings for plastic tubing PUN 4 x 0.75 mm with standard inside or outside diameters. All components are industrial quality.The package is supplied in a Systainer with suitable storage containers, which will also fit into Learnline drawers. Also included in the scope of delivery are adhesive symbols which can be used to clearly identify the storage Compressor: (1 No)Oil-lubricated, extremely quiet (45 dB (A) compressor. Ideally suited for use in classrooms. With pressure regulator and water separator.• Pressure: 800 kPa (8 bar) Pmax • Performance: 50 l/min • Reservoir capacity: 24 l • Compressed air outlet: ¼“ • Noise level: 45 dB (A)/1 m • Continuous operation: max. 50%.COMPLETE AND Compressor accessories: (1 No)Consisting of:
Page 18
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Pneumatics Basic Level: Training course documents (1 No)Nineteen project-orientated exercises, increasing in complexity and suitable for equipment set are the ideal introduction to pneumatics. Real problem descriptions with positional sketch, concrete project tasks and detailed aids for professional implementation provide the ideal preparation for real-life industrial environment. A new feature in the latest edition is the separation of the documentation into a workbook and a book of exercises. Each worksheet in Software: (1 No)FluidSIM®4.2 Pneumatics, individual and multiple licenses FluidSIM® Pneumatics contains a circuit diagram generation tool, a high-performance simulation tool and an e-learning tutorial on the subject of pneumatics, electro pneumatics, digital technology and GRAFCET. COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST QUALITY.System requirements • PC with Windows 98/ME/NT/2000/XP/Vista/Windows 7 • At least Pentium II 500 MHz • At least 128 MB RAM • Sound card
Page 19
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
CD-ROM: (1 No)FluidSIM®4.2 Pneumatics –Student version Fluid SIM Pneumatics contains a circuit diagram generation tool, a high-performance simulation tool and an e-learning tutorial on the subject of pneumatics, electropneumatics, digital technology and GRAFCET.COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST QUALITY. System requirements • PC with Windows 98/ME/NT/2000/XP/Vista/Windows 7 • At least Pentium II 500 MHz • At least 128 MB RAM Differences between full and Limitations of student version: In comparison with the student version, the full version offers the following functions: • Simulation of complex circuits without limitation limiting the number of components.• Precise calculation of pressures, flow rates, speeds, cylinder forces, electrical currents and voltages • Display of calculated status variables at all connections or by installing measuring instruments • Status diagrams for graphical display of simulation values during
Page 20
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
CD-ROM:FluidSIM®4.2 Pneumatics –Student version Fluid SIM Pneumatics contains a circuit diagram generation tool, a high-performance simulation tool and an e-learning tutorial on the subject of pneumatics, electropneumatics, digital technology and GRAFCET.COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST QUALITY. System requirements • PC with Windows 98/ME/NT/2000/XP/Vista/Windows 7 • At least Pentium II 500 MHz • At least 128 MB RAM • Sound card • 4-speed CD-ROM drive COMPLETE AND COMPATABLE IN ALL Software: (1 No)Training software Fundamentals of pneumatics The interactive and multimedia training program covers the basics of pneumatic control systems. Content extracts: • Drive components • Power supply • Final control elements • Signaling elements • Control elements • Additional requirements Training time: approx. 12 hours E.g. Single license on CD-ROM: with network license
Page 21
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Equipment set, (1 No)Extension kit to convert "Pneumatics, Basic Level" to "Electropneumatics, Basic Level"This extension kit, together with the equipment set "Pneumatics, Basic Level", provides all the components required for basic training in electropneumatic control technology. Components have the patented Quick-Fix system, pneumatic and electrical connections are located on the easily-accessible upper side of the components, Quick Star fittings for plastic hose PUN-4 x 0.75 with standard inside or outside diameters and 4 mm safety sockets or M8 industrial plug connectors. All components are of industrial quality. Supplied in a Systainer with suitable storage Connecting cable set, (1 No)Safety laboratory cables, 98 units, red and blue Complete set, consisting of 98 safety laboratory cables with 4 mm safety connectors in the colors red and blue: • 10x red 50 mm • 10x blue 50 mm • 26x red 300 mm • 11x blue 300 mm • 21x red 500 mm • 12x blue 500 mm • 3x red 1000 mm • 3x blue 1000 mm • 1x red 1500 mm • 1x blue 1500 mmCOMPLETE AND
Page 22
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Teachware, (1 No)Electropneumatics Basic Level: Training course documents Twelve project-orientated exercises, increasing in complexity and suitable for equipment set, are the ideal introduction to electropneumatics. Real problem descriptions with positional sketch, concrete project tasks and detailed aids for professional implementation provide the ideal preparation for a real-life industrial environment. A new feature in the latest edition is the separation of the documentation into a workbook and a book of exercises. Each worksheet in the book of exercises has a sample solution in the workbook. Workbook• Sample solutionsSoftware, (1 No)Training software Fundamentals of electropneumaticsThe interactive and multimedia training program covers the basics of electropneumatic control systems. This knowledge will be implemented in the project section using various practical projects. The participants can refer back to the project-specific information
Page 23
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Content extracts:• Advantages and drawbacks of electropneumatics• Fundamentals of electricity• Components of electropneumatics• Electromechanically actuated valves • Relays and contactors• Basic circuits• Direct and indirect actuation• Basic logic functions• Various sequence controllers• Standards-compliant electrical circuit diagrams• Electrical and pneumatic circuit diagrams• Safety and protective measures in electropneumatic systems• Maintenance and servicing including fault location and elimination• Standards-compliant documentation of electropneumatic circuitsMagnet Symbol Set, (1 No)For step-by-step development of circuit diagrams. The symbols adhere to a metal-backed board. Connections and designations are marked with chalk. The symbol sets are stored in a Systainer.Design: Electrical engineeringCOMPLETE AND Video film, (1 No)DVD Electropneumatics and Electrohydraulics, Basic LevelThe main emphasis of this DVD is on electrical control systems. In addition to an
Page 24
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Equipment set, (1 No)Training Package: Electro pneumatics, Advanced LevelThis training package contains all the components required for advanced training in electro pneumatic control engineering, It builds on Training Package Components have the patented Quick-Fix system, pneumatic and electrical connections are located on the easily-accessible upper side of the components, Quick Star fittings for plastic hose PUN-4 x 0.75 with standard inside or outside diameters and 4 mm safety sockets. All components are of industrial quality. Supplied in a Systainer with suitable storage containers, also suitable for Learn line storage drawers. The scope of delivery also includes Teachware, (1 No)Electropneumatics, advanced level: Training course documents As a continuation of the basic level for electropneumatics, the advanced level includes twelve additional, challenging tasks which are suitable for the equipment set. The documents are targeted at experienced pneumatics technicians. New features of this revised and updated edition include revised exercise sheets for practical use during instruction. The workbook contains a sample
Page 25
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
9 Dead Weight Master Gauge CalibratorThis unit consists of:• A precision machined and cylinder assembly mounted on leveling screws• A Bourdon gauge for calibration• The weights (Added to the upper end of the piston road which is rotated to minimum friction effects) the gauge is
1 -
10 Hydraulic Trainer (Transparent Type Components)Consisting of following items
1 -
• Transparent model table Size: 1500(L) x 790(W) x 870(H)mmCabinet (Locking type)430 (L) x 700 (W) x 680(H)mm• Transparent model power unitCapacity: 7.5 lHydraulic oil: ISO VG32Motor: AC220V, 60HzMax Pressure: 10kg/cm2• Hydraulic transparent model clampUsed for fixing parts on the • Pressure relief valve, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated• Pressure relief valve, cushion, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated
Page 26
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• Orifice valve Length: 75mmWidth: 60mm2 porthand lever operated• One way flow control valveLength: 75mmWidth: 60mm2 portAdjusting lever operatedSpring check type• Pressure compensative flow control valveLength: 75mmWidth: 60mm3 portAdjusting lever operatedSpring spool type Inside pressure measurement • Hydraulic check valveLength: 75mmWidth: 60mm2 portSpring check type• Hydraulic check valve, pilot actuatedLength: 75mmWidth: 60mm3 port• 2/2 way valveLength: 75mmWidth: 60mm2 portHand lever operated• 3/2 way valve Length: 75mmWidth: 60mm3 portHand lever operated• 4/2 way valveLength: 80mmWidth: 60mm4 port
Page 27
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• 5/2 way valve, pilot actuatedLength: 95mmWidth: 60mm5 portPush lever operated • Shut-off, circuitLength: 95mmWidth: 60mm4 portAdjusting lever operated Spring check type • Pressure relief valve, pilot actuatedLength: 80mmWidth: 60mm4 portAdjusting lever operated • Pressure relief valve, externally actuatedLength: 80mmWidth: 60mm4 portAdjusting lever operated Spring spool type • Double check valve, pilot actuatedLength: 95mmWidth: 60mm4 port• Flow dividing valve Length: 75mmWidth: 60mm4 portAdjusting lever operated Spring spool type • 3 way pressure flow control valveLength: 95mmWidth: 60mm3 portAdjusting lever operated • Rectifier circuit Length: 90mm
Page 28
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• External gear motor Length: 90mmWidth: 90mm2 port• Linear motorLength: 90mmWidth: 90mm2 port• Rotary vane motorLength: 90mmWidth: 90mm2 port• Axial piston motor Length: 110mmWidth: 60mm4 port• Pressure gaugeLength: 50mmWidth: 50mm1 port• Pressure switchLength: 90mmWidth: 90mm1 port4mm socket incAdjusting lever operated • Piston accumulatorLength: 110mmWidth: 60mm2 port• Piston accumulatorLength: 110mmWidth: 60mm2 port• Diaphragm accumulatorLength: 80mmWidth: 60mm2 port• Bladder accumulatorLength: 120mmWidth: 60mm2 port• 3/2 way solenoid valve
Page 29
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• 4/2 way double solenoid valveLength: 100mmWidth: 60mm4 port4mm socket inc• 4/3 way solenoid valve(PT connected)Length: 100mmWidth: 60mm4 port4mm socket inc• 4/3 solenoid valve(ABT connected)Length: 100mmWidth: 60mm4 port4mm socket inc• 4/3 way solenoid valve(all block type)Length: 100mmWidth: 60mm4 port4mm socket inc• T connector Length: 75mmWidth: 60mm3 port• + connectorLength: 75mmWidth: 60mm4 port• Transparent model hoseLength: 1mInner diameter: 4mmMax pressure 20kg f/cm3• Hydraulic transparent model workbookCOMPLETE AND COMPATABLE IN ALL RESPECTS, , OR
9 Dead Weight Master Gauge Calibrator
THAILAND/INDONESHIA/UK or
Equivalent
1
Page 30
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• Transparent model table Size: 1500(L) x 790(W) x 870(H)mmCabinet (Locking type)430 (L) x 700 (W) x 680(H)mm• Transparent model power unitCapacity: 7.5 lHydraulic oil: ISO VG32Motor: AC220V, 60HzMax Pressure: 10kg/cm2• Hydraulic transparent model clampUsed for fixing parts on the • Pressure relief valve, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated• Pressure relief valve, cushion, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated• Pressure reducing valveLength: 75mmWidth: 60mm3 portSpring adjustableAdjusting lever operated• 2 way flow control valve Length: 75mmWidth: 60mm2 portAdjusting lever operated• Orifice valve Length: 75mmWidth: 60mm2 porthand lever operated
Page 31
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• Hydraulic check valveLength: 75mmWidth: 60mm2 portSpring check type• Hydraulic check valve, pilot actuatedLength: 75mmWidth: 60mm3 port• 2/2 way valveLength: 75mmWidth: 60mm2 portHand lever operated• 3/2 way valve Length: 75mmWidth: 60mm3 portHand lever operated• 4/2 way valveLength: 80mmWidth: 60mm4 portHand lever operated• 4/3 way valveLength: 90mmWidth: 60mm4 portHand lever operated• Hydraulic double acting cylinder Length: 75mmWidth: 60mm2 portPiston dia: 15mm• 5/2 way valve, pilot actuatedLength: 95mmWidth: 60mm5 portPush lever operated • Shut-off, circuitLength: 95mm
Page 32
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• Pressure relief valve, externally actuatedLength: 80mmWidth: 60mm4 portAdjusting lever operated Spring spool type • Double check valve, pilot actuatedLength: 95mmWidth: 60mm4 port• Flow dividing valve Length: 75mmWidth: 60mm4 portAdjusting lever operated Spring spool type • 3 way pressure flow control valveLength: 95mmWidth: 60mm3 portAdjusting lever operated • Rectifier circuit Length: 90mmWidth: 90mm4 portSpring check type 4 check valves • Vane motorLength: 90mmWidth: 90mm2 port• Internal gear motor Length: 90mmWidth: 90mm2 port• External gear motor Length: 90mmWidth: 90mm2 port• Linear motor
Page 33
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• Pressure switchLength: 90mmWidth: 90mm1 port4mm socket incAdjusting lever operated • Piston accumulatorLength: 110mmWidth: 60mm2 port• Piston accumulatorLength: 110mmWidth: 60mm2 port• Diaphragm accumulatorLength: 80mmWidth: 60mm2 port• Bladder accumulatorLength: 120mmWidth: 60mm2 port• 3/2 way solenoid valveLength: 100mmWidth: 60mm3 port4mm socket inc.Power DC 24V• 4/2 way single solenoid valveLength: 100mmWidth: 60mm4 port4mm socket inc• 4/2 way double solenoid valveLength: 100mmWidth: 60mm4 port4mm socket inc• 4/3 way solenoid valve(PT connected)Length: 100mm
Page 34
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
• T connector Length: 75mmWidth: 60mm3 port• + connectorLength: 75mmWidth: 60mm4 port• Transparent model hoseLength: 1mInner diameter: 4mmMax pressure 20kg f/cm3• Hydraulic transparent model workbookCOMPLETE AND COMPATABLE IN ALL RESPECTS, , OR
11 Maintenance and Repair Tool kit (1 each)Ball Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mmChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)Hand hacksaw 12”( Adjustable frame)
THAILAND/INDONESHIA/UK or
Equivalent
1 -
Page 35
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
2 Dead Weight Gauge Tester with Pressure gaugeSpecifications
SPECIFICATION
CYLINDER - BRASS. PISTON - High quality stainless steel , cross – sectional area 333 mm2
Pressure gauge-bourdon tube type with scale graduated 0-200 KN /m2 in 10 KN /m2 Intervals (also available in imperial units ). Weights 4 each 1, 0 kg 2 each 0,5 kg 1 each 0,2 kg Materials and finishes have been chosen carefully to give the fullest Protection against corrosion
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Steam Turbine Power SystemExperimental opportunities:Energy relationships and the First Law ofThermodynamics.Cycle analysis and the Second Law ofThermodynamics.Control volume analysis.Entropy analysis.Isentropic analysis and the study of turbine/nozzle efficiency.Heat transfer analysis and the study of boilerefficiency.Combustion processes.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
13
Page 36
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
A steam electric power plant designed for engineering education. Consisting of a fossil-fueled boiler, steam turbine and condenser tower mounted on a rigid, mobile frame. Boiler of a tube-type, flame through design with access doors to view the inner workings. Steam rate adjustable through a steam admission valve, regulating turbine speed and power output. Axial flow turbine used to drive an alternating current generator. Generator output to be rectified allowing the output of direct current. Generator output capable of delivering 15Volts at 1 Amp to infinitely adjustable 15 Watt load. Unit to include analog boiler pressure gauge, generator voltage and generator current meters. To be supplied with a USB based digital data acquisition system
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
4 Thermocouples(Different Ranges and types) 0-1500 oC
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
5 Sectioned model of Simple Vertical Boiler
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
6 Sectioned model of COCHRAN (Multi tubular boiler)
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
7 Sectioned model of Marine Boiler (Scotch types).
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
8 Sectioned model of UK/JAPAN / 1
Page 37
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
11 Training Steam Boiler (100Kg/h)
SpecificationBoiler unit:- Type : Vertical, water tube.- Capacity : Up to 100 kg/hr steam.: Up to 10 kg/cm2 pressure.- Boiler instrument and safety devices include:: Pressure gauge and switch.: Temperature gauge.: Safety valve.: Level gauge and switch.: Safety alarm.- Boiler accessories include:: Steam separator.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Burner:European Made Force Draft with Built in Atomizer & PumpType : On – Off, automaticFuel : Diesel oil, Kerosene or any other Light Oil
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Feed water system includes:Resin filter for public water.Water Softner Filtration with activated Carbon Pressure gauge.Soft water tank.Feed water pump.Water meter for steam rate monitoring.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Fuel system includes:- Fuel tank- Fuel flow meter
COMPLETE AND COMPATABLE IN ALL RESPECTS (ALONGWITH INSTALLATION) , OR
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
12 Working model of steam Turbine
UK/JAPAN / GERMANY /
TAIWAN/
1
Page 38
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Instrumentation
Digital : high speed data acquisition system Data acquisition software with configurable data output windows laptop computer for on – screen data display single cable PC connection Multiple analog INMultiple digital IN/OUT 4 Frequency / Pulse IN
Sensors ( Preinstalled and calibrated )
Boiler temperature and pressure Turbine inlet temperature and pressure Turbine exit temperature and pressure Turbine RPM Fuel flow
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Operating conditions / limitations
Boiler : pressure 120 psi ( 827 kpa ) temperature 482 degree F (250 degree C)
Generator : 15.0 volts , 1.0 Amp ( total load of 15.0 watts )
Operating requirements
Typical laboratory or classroom setting Power : 220V Single Phase Fuel : liquid petroleum
COMPLETE AND
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Page 39
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
13 Gas Turbine Power SystemExperimental opportunities Experimental and research opportunities include scientific, engineering, thermodynamic and environmental investigations. With a wide array ofsensors, experiments relating to secondary education physics and chemistry through graduate level fuels and combustion research are readilyperformed. Standard courses in engineering thermodynamics and fluid mechanics benefit from textbook direct examples conducted andmeasured in real time. The limitations of theoretical models and the variability of experimental technique can be experienced first hand. Inaddition to academics, the
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
With measured values of compressor inlet temperature and pressure, turbine inlet temperature and pressure, turbine exit temperature and pressure, fuel flow and inlet and exit areas, possible calculations include:• Compressor Analysis - compressor pressure ratio, power required, rotational speed and compressor efficiency• Turbine Analysis - work and power developed, expansion ratio and turbine efficiency• Cycle / Brayton Type Analysis - mass flow rate,
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Page 40
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
A complete gas-turbine power system to consist of an engine designed and manufactured for engineering education.Engine must utilize a centrifugal flow compressor, reverse flow annular combustor and an axial flow turbine stage.Engine to be of current manufacture and consisting of all new components.All engine components either vacuum investment cast or precision CNC machined.All high-heat components manufactured from 17-4 ph stainless steel, Inconel® 718or CMR 247 Super Alloy.Traceable and verifiable material to be used throughout engine.All elements comprising the system to be contained in a rigid steel chassis mounted on rolling castors. All system metal surfaces to
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Operator panel to consist of digital TIT, EGT, and RPM indicators, analog oil pressure, engine pressure ratio, fuel pressure and air pressure gauges, keyed master, green start red stop and T-handled power control lever.System to be equipped with calibrated transducers and thermocouples capable of measuring compressor inlet, compressor exit, turbine stage inlet, turbine stage exit and thrust nozzle exit temperature and pressures, fuel flow, thrust and engine compressor
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Page 41
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
14 Reciprocating air compressor Study BenchSpecifications and features • Measurement of intake and delivery pressure• Airflow rate• compressor speed• Temperatures• Determination of the volumetric and isothermal efficiency• Compressor, 1 cylinder, single-stage• Power consumption: 750W• nominal speed: 980rpm• operating pressure: 8bar• max. pressure: 10bar• intake capacity: 150L/min at 8bar• Safety valve blow off
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Measuring ranges - temperature: 2x 0...200°C- pressure: -1...1bar / 0...16bar- differential pressure: 0...10mbar- 2 manometers: -1...4bar / 0...16bar
COMPLETE AND
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
15 Rotary air compressorFeatures
Screw air compressor with air receiver or portable screw air compressor with air tank (2KW~5KW)SpecificationsPressure : 5Bar ~ 10 BarTank: 200 LitersWith Education training
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
16 Ignition point Testing equipmentBattery Ignition system for Single spark plug and multi
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Page 42
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
19 AC System Trainer (Heating and Cooling)SpecificationsCompressor unit with condenser 3-Phase AC motor, 3 HP, 380V, 50HzAutomatic regulating valve for cooling water calibrating tank to measure the water condensed at dew point conditions venturi meter to control the return air flow double damperCentral fan with variable speed motor variable heating coil, 2kW+1kW humidification station2 stage direct cooling coilReheating, 1kWRegulating system for conditioned air 6 hygrometers for relative humidity control6 dial thermometers for air controlPressure switches, solenoid valves, expansion valves,
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
21 Working models of Petrol EngineA= 2 Stroke Petrol EngineB= 4 Stroke Petrol EngineSpecifications Single Cylinder 2 stroke and 4 strokes with important parts including valve control, Ignition system and Carburetor, sectioned model made of original parts.
COMPLETE AND
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
22 Working models of Diesel EngineA= 2 Stroke Diesel EngineB= 4 Stroke Diesel EngineSpecifications Single Cylinder 2 stroke and 4
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Page 43
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
23 Maintenance and Repair Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mChisel flat 6”8”10”Chisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)Hand hacksaw 12”( Adjustable frame)
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Twist drill set5mm,8mm,10mm,12mm(02,each)Tap set with handle 5mm,6mm,8mm,10mm( 01,each)Fix die set with handle 6mm,8mm,10mm,12mmTap extractor 6-12mmOil can ½ literEasy out 5-12 MMWith tool box made of M.S.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
- Total:
MATERIALS TESTING AND HEAT TREATMENT (MECH 362)
Page 44
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
1 UNIVERSAL HARDNESS TESTING MACHINE FOR BRINELL, ROCKWELL AND VICKERS HARDNESS TESTSpecificationMeasuring range: 5-400HBS, 25-85HRA, 25-100HRB, 20-70HRC, 210-1000HVTest load: 294.2, 306.5, 588.4, 612.9, 980.7, 1471, 1839N (30, 31.25, 60, 62.5, 100, 150, 187.5kgf)Max. height of tester piece: 150-210mmPower supply: 220V or 110V AC, 50/60HzMain AccessoriesLarge flat anvil: 1 pcSmall flat anvil: 1 pcV-notch anvil: 1 pcDiamond cone penetrator: 1 pcDiamond pyramid penetrator: 1 pcs
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
4 Universal Testing Machine(Computerized, 50-100KN capacity)Specification• Max Test load =100KN• Load range =0-20KN ,0-50 KN ,0-100 KN• Accessories;• Grip for round specimen 0-20mm• Grip for flat specimen 0-15mm• Instructional manual• Fixture for Bend, Shear, compression and tensile test• Extensometer• Tool kit • Graphical unit accessories
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Page 45
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
5 Readout Microscope:Suitable to measure the diameter of indentation in Brinell Hardness testing, determine the width and length of scale mark, slit, key slot and dent. Check metal surface quality, density of fiber and field specimens, etc.Specification:Magnification: 40XEffective field view range (mm): Ø3Dimensions (mm): 70 x 50 x 187
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
6 Torsion Testing machine Along with all standard and optional accessoriesSpecificationMeasuring range = 5-500 N-mMeasuring range of scale = 0-50 N-M 0-100 N-m 0-200 N-m 0-500 N-mDistance of between grips = 0-600 mmDiameter of specimen =5-18mm
COMPLETE AND
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
9 Specimen Cutoff MachineWith all Standard accessories and attachmentsSpecification• Bench mounted cut off machine• Safety switch to hood• Two quick claiming vices with mountings for horizontal and vertical
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Page 46
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
10 Magnetic particle testing equipment
Machine Specifications• Coil 16" Diameter, 7500 ampere turn• Power Supply Output 3000 amp AC• Electrical requirements 230 V 1ph 50AAccessories:• Central Conductors• UV Glasses• Work Rest Extension KitCOMPLETE AND
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
11 Heat treatment FurnaceWith Complete electric control panel and fittingsTemperature range up to 1500’C
COMPLETE AND COMPATABLE IN ALL
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
12 Specimen Polishing MachineWith all types necessary polishing clothsSpecification• Double interchangeable 200/250mm diameter plates• Single motor with drive belt variable speed 20 to 600 rpm• 230V single phase• 2 Pre select speeds 150 and 300 rpm• 2 rotation direction• Digital display of speed• Touch sensitive controls• Water flow controlled by electromagnetic valve• Multi-jet water spray systemCOMPLETE AND COMPATABLE IN ALL
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
15 Metallurgical Microscope:
UK/JAPAN / GERMANY /
TAIWAN/
1
Page 47
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
16 ThermocoupleType k temp range 0-1200cDia. 21.7mm,with digital temp controllerCOMPLETE AND COMPATABLE IN ALL
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
17 Maintenance and Repair Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Open ended spanner 4mm-24mmElectric hand drill machine( 12mm)Twist drill set5mm,8mm,10mm,12mm(02,each)Tap set with handle 5mm,6mm,8mm,10mm( 01,each)Fix die set with handle 6mm,8mm,10mm,12mmTap extractor 6-12mmOil can ½ literEasy out 5-12 mm
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
Page 48
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
2 Universal milling machineSpecificationSuitable to cut spur, helical and bevel gears, push button control, separate automatic feed electric motor, coolant supply attachments and chip trayTable size (mm).= 1300x305 to 1300x350.Width of t slot (mm) = 18.Table longitudinal travel (mm) = 600-650.Table cross travel (mm) = 300-400.Table vertical travel (mm) = 455-600.No of spindle speeds = 16.Speed range (rpm) = 40- 3000.No of feeds = 12.Feed rate longitudinal, cross, vertical (mm) = 10-900.Fast longitudinal travel (m/mint) = 3.Fast vertical travel (m/mint) = 1.5.
Pak Made/ UK or Equivalent
4
4 Pedestal tool grinderWheel size = 250x25x25Motor 440v, 0Hz, 3Ph = 01 HPGrinding wheels Al2O3 Number 46 and 60 fitted with machine ,Safety guard, Eye Shield, Tool rest, Grease gun, Wheel dresser . Complete in all respect.
COMPLETE AND COMPATABLE IN ALL
Pak Made/ UK or Equivalent
2
Page 49
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
6 Power hacksaw SpecificationHydraulic Power Hacksaw, variable cutting pressure, quick return of frame, cooling pump.Capacity Ø = 180-225 mmCapacity◊ = 230 x 230 mmMiter 450 = 190mmStrokes/mint = 40-160Blade size = 450 x 32 x 1.6mmMotor rating 3 ph 1440v/50 Hz. = 0.75-1.5 KWAdjustable material stand = 450-650mmWidth of stand = 350mmSeparate motor operated 440v, 3Ph, 50Hz 2.5 to 3 Kw. coolant supply attachment motor operated, Complete in all respect and standard accessories.
Pak Made/ UK or Equivalent
1
7 Surface grinding machine SpecificationFor grinding accurate jobs, accuracy 0.001mm, digital read out, workstation light, coolant supply attachment, work table hydraulic control.Table clamping surface (mm) = 550x300 to 600x300.Table longitudinal travel (mm) = 550 to 600Table cross travel (mm) = 300 to 350.Cross feed infinitely variable (m/stroke) = 0-20Grinding wheel size (mm) = 250x32x76.Motor power 3Ph = 3kw.With all standard accessories, tool kit, tool cabinet,
Pak Made/ UK or Equivalent
1
Page 50
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
8 Universal tool & cutter grinding machine SpecificationSuitable to grind all types of tool and cutters.Clamping area of table (mm) =820x 140.Longitudinal table travel (mm) =450.Lateral table travel (mm) = 225.Distance between centers (mm) = 600-650Height of center (mm) =125-130Spindle speed (rpm) =2800- 5600.Motor power 3ph = 1 kw.Table angle setting (degrees) =±450.
Pak Made/ UK or Equivalent
1
Attachments Face milling cutter grinding attachment (mm) = 450.Radius grinding attachment (mm) = 0-25.Cylindrical grinding attachment (mm) = 250.Internal grinding attachment (mm) =12-50.Indexing attachment = 01Extended grinding wheel spindle (mm) = 75.Universal vice (mm) = 100x25x75.Drill point grinding attachment (mm) = 3-25.Lathe and planer tool grinding attachment (mm) =10-38.Set of spring collets (mm) = 6, 8, 10, 12 ,16, 20.
Page 51
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Accessories Work head = 1.Left hand tail stock = 1.Right hand tail stock = 1.Diamond wheel dresser = 1.Setoff wheel guards = 1.Universal tooth rest = 1.Center height gauge = 1.Collect wrench = 1.Ejector rod = 1T- wrench = 1.Pin wrench = 1.Grinding wheel sleeves = 5.Set of grinding wheels different shapes = 7.Spindle extension 100 mm =1.Belt for spindle drive = 1.Suitable tool cabinet = 1.Instruction / operation manual, complete in all respect.
COMPLETE AND COMPATABLE IN ALL 9 Vertical differential type Hobbing machine SpecificationVertical differential type machine capable to cut spur gears, helical gears and worm gears, heaving even, odd, prime number of teeth. Built in coolant and lubrication pump.Maximum module for gears (mm) = 6.Maximum diameter of gear hob wit out outer support (mm) = 400-500.Maximum diameter of helical gears hobbed (mm) = 370.Hob diameter (mm) = 120.Hob arbor diameter (mm) = 22, 27, 32.
Pak Made/ UK or Equivalent
1
Page 52
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
11 UNIVERSAL DIVIDING HEAD Suitable for direct angular plain and differential indexing, helical milling operation etc.Center height (mm) = 130.Direct indexing plates = 3.Plane indexing plates = 3.Foot stock = 1.Set of change gears = 12 gears.
Pak Made/ UK or Equivalent
4
12 ROTARY TABLE Suitable for angular indexing in degrees and mints.Gear ratio = 1:60.Rotary table diameter (mm) = 300.
Combatable with universal
Pak Made/ UK or Equivalent
2
13 VERTICAL HEAD Suitable to be mounted on milling machine spindle .Angular setting (degrees) = 45.Spindle taper = ISO 40Collet adaptor and draw in bolt = 1 set.Set of spring collets for straight shank end mill (mm)
Pak Made/ UK or Equivalent
4
14 SWIVEL BASE VICE Hardened and ground jaws with vice handle.Width of jaws (mm) = 210.Height of jaws (mm) = 63.Jaws opening minimum (mm) =160.Index swivel base = ± 360 degree.
Pak Made/ UK or Equivalent
4
15 MILLING ARBORSMade of alloy steel, spacing rings hardened and ground, suitable to fit spindle nose .
Pak Made/ UK or Equivalent
4
Page 53
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
18 RADIUS NOSE END MILL(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Nose radius (mm) = 6Cutter diameter (mm) = 12.Combatable with universal
Pak Made/ UK or Equivalent
4
19 RADIUS NOSE END MILL(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.
Pak Made/ UK or Equivalent
5
20 CORNER ROUNDING END MILL(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Nose radius (mm) = 6,.Shank diameter (mm) =20.Combatable with universal
Pak Made/ UK or Equivalent
5
21 WOOD RUFF KEY SEAT CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Key dimension (mm) = 6x32.Cutter diameter (mm) = 32.5.Cutter width (mm) = 6.Shank diameter (mm) = 18.Combatable with universal
Pak Made/ UK or Equivalent
2
22 T-SLOT CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth, right handed with under cut staggered teeth.Cutter diameter (mm) = 31.2.Cutter width (mm) = 12.6.Over all length (mm) = 100.Shank diameter (mm) =18.
Pak Made/ UK or Equivalent
5
23 DOVE TAIL CUTTER(Best Quality)
Pak Made/ UK or Equivalent
2
Page 54
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
24 SINGLE ANGLE MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Angle of cutting (degrees) = 45Diameter (mm) = 60Width (mm) = 12,
Pak Made/ UK or Equivalent
2
25 SHELL END MILLS(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.
Pak Made/ UK or Equivalent
2
26 CONCAVE MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Radius (mm) = 2.5,.Diameter (mm) = 63, Width (mm) = 10, Bore diameter (mm) = 22,.Combatable with universal
Pak Made/ UK or Equivalent
2
27 CONVEX MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Radius (mm) = 5, Diameter (mm) = 63, Width (mm) = 10, Bore diameter (mm) = 22, Combatable with universal
Pak Made/ UK or Equivalent
2
28 SIDE AND FACE MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground staggered cutting teeth.Cutter diameter (mm) = 63, Width of cutter (mm) = 8, Bore diameter (mm) = 22
Pak Made/ UK or Equivalent
5
Page 55
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
30 SLITTING SAW(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Width of cutter (mm) =, 3.Cutter diameter (mm) = 80.Bore diameter (mm) = 22.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
2
31 HOB CUTTERS(Best Quality) Made of high quality HSS, hardened and ground cutting teeth, high wearing resistance.Right hand hob single start 20 degree pressure angle bore size 22mm module 1.75,2.00 .Right hand hob single start 20 degree pressure angle bore
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
32 DIGITAL OUT SIDE MICRO METER(Best Quality) Carbide tipped measuring surfaces metric and inch conversion measuring system.Large LCD numeral for easy reading.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
5
33 DIAL CALIPER(Best Quality) Rack and pinion mechanism, depth bar sharp jaws edges, raised edges of beam.Measuring range (mm) =0-
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
5
34 DIGITAL HEIGHT GAUGE(Best Quality) Two measuring mode ABS and INC, LCD display with offset scribe carbide point.Measuring range (mm) = 0-300.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
35 DIGITAL DEPTH GAUGE(Best Quality) Two measuring mode ABS
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
1
Page 56
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
37 COMBINATION SET(Best Quality) Three measuring heads attached to ground steel rule square head 45 degree and 90 degree, center head, protractor head 0-180, scribe, sprit level.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
2
38 STEEL RULE(Best Quality) Sharp and clear graduation marks made of anti rust steelRange (mm) = 300.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
10
39 RADIUS GAUGE(Best Quality) Made of fine steel radius sizes stamped, convex and concave radius with locking device.Measuring radius (mm) = 0.5-
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
5
40 DRILL SLEEVES(Best Quality) Ground externally and reamed internally, hard tang,
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
2
41 HAMMER (BALL PEIN) (Best Quality) Made of cast steel hardened and ground peen and face. Suitable wooden handle.Weight of hammer (Kg) = 0.250.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
5
42 HAMMER (CROSS PEIN) (Best Quality) Made of cast steel hardened and ground peen and face. Suitable wooden handle.Weight of hammer (Kg) = 0.250.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
5
43 ADJUSTABLE WRENCH(Best Quality) Made of forged steel, chrome plated
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
2
44 ELEN KEY SET(Best Quality)
UK/JAPAN / GERMANY /
TAIWAN/
2
Page 57
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
47 SURFACE TABLE Made of closed grain cast iron properly polished and aged fitted with suitable legs.Length x width x Thickness (mm) = 630x630x80.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
48 OIL CAN(Best Quality)Steel body and metallic pump long spout.Capacity (ml) =500.Length of spout (mm) = 200.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
10
49 GREASE GUN(Best Quality) Metallic body and metallic handle along with leather piston, with pointed and flaring nozzle.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
2
END MILL ADAPTORCompactable with universal milling machine complete in all respect.
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent50 Maintenance and Repair
Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mmChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
1
Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)
UK/JAPAN / GERMANY /
TAIWAN/ INDONESHIA Or
Equivalent
-
Page 58
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
1 3D CAD Software (Solid 252 3D CAM Software (Milling,
Turning, Turn/Mill, Wire 25
3 Simulation Software 504 SERVER SYSTEM 1
SPECIFICATIONProcessor 1 x Intel® Xeon® processor E3-1230 (3.20 GHz, 8MB Cache with Hyper-Threading Technology & Intel ® Turbo-Boost Technology) or higherMother Board Intel Original Motherboard with C202 chipset or higher (DDR3 MemorySupported)ECC Memory 4 GB DRR-III 1066 MHzHard Disk Drive Min 2x 500 GB SATA-3.0 Gb/s with 7200 RPM or higherDrive Controllers SATA-II controllerRAID Controller Integrated SATA RAID (Levels 0/1/10) and Option to Upgrade to RAID 5 via Software Key.I/O Ports & Expansion Slots Min 1 PCI Slots with at least Two PCI express. 2.0 USB slot withExternal Storage Support
Mouse & Key Board As per manufacturer standardsChassis Tower Casing, Power supply Manufacturer StandardPower Supply Single Power Supply as manufacturer's
5 3D Solid Modeling Software (Kinetics, Static and Dynamic
25
6 Machine Design Simulation 17 DESKTOP/CLIENT
COMPUTER
Processor Intel Core i3 processor i3-2120 (3.30 GHz, 3 MB Cache) or higherMother BoardIntel Original Motherboard
25
Mech-382 CAD / CAM
Total:-
Page 59
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Sound CardBuilt-in Video Graphics display and sound card. Network Adapter Built-in Gigabit (10/100/1000 M bits per sec)LCD Monitor 17" LCD Monitor, Low Radiation, 1024 x 768 Resolution supportive. Mouse & Key Standard Keyboard and 2.0 USB 2-Button Optical Mouse with Scroll. CasingIntel tested Chassis/Power supplyManufacturer Standard casing with standard Power Supply I/O Interfaces andExpansion SlotsMin six USB 2.0 ports, Min Two PCI slots, etc.NetworkingNetworking equipment (Active and passive) complete and compatible
1
-
1 CNC Vertical machining Center3-Axis
TABLEWorking Surface 920x330 to 900x350 mm Max. table load 300 to 400 kg or greaterTRAVELLongitudinal Travel ( X ) 600-650 mm
UK/JAPAN / GERMANY Or
Equivalent
1
Mech-392 CNC MACHINES
Total:-
Page 60
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
STANDARD ACCESSORIES & SPECIAL ACCESSORIESHeat Exchanger Enclosed Splash GuardRemovable Manual Pulse Generator Flat Type Chip Conveyor & Chip WagonCoolant Around Spindle Rotary Table With 4th Axis ControlSpiral Type Chip Conveyor 4th Axis ConnectorSemi-enclosed Splash Guard Coolant Through Tool Interface Coolant Through Spindle With FilterAutomatic Power Off Coolant WashCall Light Automatic Tool Length Pendant Type Operator Panel Max. Tool Weight 5-7 Kg Spindle Cooler, Graphite Filtering SystemAlong with all necessary compatible tooling to perform 2 CNC Turning Center 2 Axis
Capacity
Max Turning Dia = 300-400 mmMax turning length=500-800 mmChuck size =150-200 mmBar capacity =40-45 mm
SpindleHole Through spindle =50—55 mmMotor output =7-7.5 kwDrive system =Belt driveSpindle drive ratio = 1:1
UK/JAPAN / GERMANY Or
Equivalent
1
Page 61
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
CONTROLLERFanuc or equivalent
Tail StockQuill center Taper = MT# 4 (Live center required)Quill Dia. / travel =70-75 mmTailstock Base travel =275-300 mmProgrammable base type = servo motor+ ball screwAlong with all necessary tool holders and compatible tooling.
COMPLETE AND COMPATABLE IN ALL 3 CNC Wire Cut MachineSpecification• Work table size(mm): 800x400 to 900x600• X Travel (mm) 450-500• Y Travel (mm) 600-650 • Max. work piece thickness(mm): 250 to 300• Wire traveling speed(m/s): 8-12• Wire diameter(mm): 0.15-0.2• Max. cutting speed(mm/min): 100-120• Power Consumption ( Kva)= 1.5 – 2.0• Controller Type = Fanuc or Equivalent• Maximum taper angle /plate thickness =±30/100COMPLETE AND COMPATABLE IN ALL
UK/JAPAN / GERMANY Or
Equivalent
1
4 SERVER SYSTEM 1
Page 62
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
SPECIFICATIONProcessor 1 x Intel® Xeon® processor E3-1230 (3.20 GHz, 8MB Cache with Hyper-Threading Technology & Intel ® Turbo-Boost Technology) or higherMother Board Intel Original Motherboard with C202 chipset or higher (DDR3 MemorySupported)ECC Memory 4 GB DRR-III 1066 MHzHard Disk Drive Min 2x 500 GB SATA-3.0 Gb/s with 7200 RPM or higherDrive Controllers SATA-II controllerRAID Controller Integrated SATA RAID (Levels 0/1/10) and Option to Upgrade to RAID 5 via Software Key.I/O Ports & Expansion Slots Min 1 PCI Slots with at least Two PCI express. 2.0 USB slot withMouse & Key Board As per manufacturer standardsChassis Tower Casing, Power supply Manufacturer StandardPower Supply Single Power Supply as manufacturer's
5 DESKTOP/CLIENT COMPUTER
Processor Intel Core i3 processor i3-2120 (3.30 GHz, 3 MB Cache) or higherMother BoardIntel Original Motherboard with H 61 chipset or higherFor local & Foreign BrandsMemory 2GB- DDR-III
10
Page 63
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
Network Adapter Built-in Gigabit (10/100/1000 M bits per sec)LCD Monitor 17" LCD Monitor, Low Radiation, 1024 x 768 Resolution supportive. Mouse & Key Standard Keyboard and 2.0 USB 2 -Button Optical Mouse with Scroll. CasingIntel tested Chassis/Power supplyManufacturer Standard casing with standard Power Supply I/O Interfaces andExpansion SlotsMin six USB 2.0 ports, Min Two PCI slots, etc.6 NetworkingNetworking equipment (Active and passive) complete and compatible in all respects.
1
7 Metal Cutting Band sawMotor =3Ø 2HPStep Saw Blade Speed / Variable Saw Blade Speed = 50Hz 95 164 239 314(FPM) 29 50 73 96(MPM) 60Hz 95-402(FPM) 29 122(MPM) / 50Hz 78-335(FPM) 24-102(MPM)Blade Size WxTxL = 27x0.9x3280mmDimension LxWxH 1720x620x1055mmCUTTING CAPACITY - -0° =Bar Ø250mm(10")45° =Bar Ø150mm(6")
COMPLETE AND COMPATABLE IN ALL
UK/JAPAN / GERMANY Or
Equivalent
1
Page 64
Total Rate with SpecificationITEMS QtySr
#Total Rate
without Unit Rate GST Remarks
8 Maintenance and Repair Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mmChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body
1
Pipe wrench 10”,12”Adjustable wrench 8”,10”,12”Open ended spanner 4mm-24mmElectric hand drill machine( 12mm)Twist drill set5mm,8mm,10mm,12mm(02,each)Tap set with handle 5mm,6mm,8mm,10mm( 01,each)Fix die set with handle 6mm,8mm,10mm,12mmTap extractor 6-12mmOil can ½ liter - Total:-
Page 1
4 Auto Levels• Magnification 28 – 32 X• Image: Erect • compensator type wire-hung/air damping / magnetic• Aperture: 35 – 45 mm• Field of view: 10 - 20’ to 10 - 30’,• Horizontal circle: 00 - 3600• Min. Focusing: 0.5 to 1.8 M• Stadia constants: 0, 100• Setting accuracy: 0.2” to 0.5”• Compensation range +12’ to 30’• Accuracy in double run 1 KM leveling, +2mm or better• Circular level sensitivity: 8’ to 10 /
Japan/ UK/ Germany or Equivalent
10
Accessories• Aluminum adjustable tripod, standard tool kit.• Plumb bob.• Instruction manual• Carrying case.
5 Auto Set Level : with built-in, Micrometer: (Tilting Level)• Magnification: 28 - 32X• Image: Erect• Aperture 35-40mm • Micrometer Least count 0.2mm• Min. Focusing: 0.5 - 1.8 M• Circular level sensitivity: 8-10’/2mm• Compensation range ±12’to 30’• Accuracy in 1 KM double run leveling ± 2mm or better• Horizontal circle-00-360 stadia constant:0, 100• Compensator type: wire hung/ air damping / magnetic dumping.
Japan/ UK/ Germany or Equivalent
3
Accessories• Lens cap• Plumb bob• Took kit, dust cover• Carrying case • Aluminum adjustable tripod.• All standard Accessories
ITEMSSr # Remarks
GCT TAXILA
(a) SURVEY LAB
CIVIL TECHNOLOGY
COMPARATIVE STATEMENT
QtySpecification Unit Cost
Total Cost without GST
Total Cost with
GST GST
Page 2
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
8 PLANE TABLE SETTABLE• Made of deodar wood, with metal corners, size 80x60x2cm (32’x24”x ¾ “)• Metal, clamp for fixing it on tripod• Heavy duty aluminum tripod. • Adjustable legs with shoe• Alidad Metallic head, shoulders and fly nuts etc.• Metallic/brass, (18” long) graduation one edge,• Plumbing fork• Trough compass (in aluminum / metal case)• Plumb bob• Circular spirit level etc. complete with all
Japan/ UK/ Germany or Equivalent
2
9 Prismatic Compass with tripod:• Size : 6” (15cm)diaGraduation 00 -3600• Least count: 20minutesPill bubble: in built• Prism, sight vane brake pin, lifting pin and lid etc.• Aluminum tripod; adjustable legs and Metallic head (ball coupling type)• Carving case
Japan/ UK/ Germany or Equivalent
10
10 Telescopic Alidade: • Image: Erect• Magnification: 08-12X• Aperture: 25mm to 45mm• Minimum Focus: 2m or batter• Stadia constants: 0, 100• Movable Range: 0 to 30mm• Vertical Circle Graduation: Half (0° - 90°) full• Vernior Arm: reading 10’• Alidad – length 20-30cm, beveled edge with detachable scale.• Mounted Pill Bubble.• Complete in carrying case kit and all standard accessories.
Japan/ UK/ Germany or Equivalent
5
15 STEEL TAPE• Length 30 m, 13 mm wide• stainless steel with vinyl coating• Both face marking, one in m (0.1, 0.01, and 0.005m) and other in ft (inches & half)• first decimeter also marked for 0.001m
Pak/ China or Equivalent
15
Page 3
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
21 Ranging Rods(Two pieces)• Made of aluminum pipe 1” Φ• Two piece (5ft + 3ft) screwing
Japan/ UK/ Germany or Equivalent
40
22 CROSS STAFF• Consisting of octagonal brass box with slits cut in each face, mounted on a 1.25M (4 ft) long rod with shoe at
Japan/ UK/ Germany or Equivalent
10
24 OPTICAL Square• Prism type• 10 cm (4”) dia, metallic case with handle and carrying case complete.
Japan/ UK/ Germany or Equivalent
8
26 MALLET• Hardwood head dia 75 mm• Complete with handle 400 mm long fixed into the head.
Pak Made/ China or
Equivalent
10
27 ABNEY’S LEVEL• Telescope square aluminum body.• Magnification: 8 x or better• Image: Erect• Simi-circle ARC graduated in degree (00 + 900) and percent (0-100%)• Vernier arm reading: 10’• Magnifying glass.• Carrying case and all standard
Japan/ UK/ Germany or Equivalent
2
28 SOUNDING ROD (Aluminum)• Two pieces with screwing arrangement: (2.5m each) • 4 cm (1-1/2”) dia• With shoe at the bottom• Painted and marked in metric units, graduated in m, and 0.1m
Pak Made/ China or
Equivalent
10
29 PLUMB BOB• 100-130 gms weight• Brass polished• Replaceable blued steel pointer• Screw cap with strip indicator
Pak Made/ China or
Equivalent
10
PLANIMETER• Polar type with computing function.• LCD 8-10 digits display• Area measurements in cm2, M2, KM2, in2, ft2, Acres• Measuring range: Pole outside the area 250-350mm dia
Japan/ UK/ Germany or Equivalent
130
Page 4
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
37 Spring Balance:• Dial gange type with Hook & grip handle.• Dial gauge 0-50kg• Mim reading 200gm
Japan/ UK/ Germany or Equivalent
10
38 Barometer:• Precision barometer for measuring atmospheric pressure and altitudes.• Fixed dial for pressure meanrenats and rotating dial for altitude calculation• Pressure gauge: 970 – 100kpa• Division 1 hpa• Height Range: 0-6000m• Divion: 10m• Dia of Gauge: 50mm or greater.• Complete carrying case and all standard accessories.
Japan/ UK/ Germany or Equivalent
2
-
1 Compression Testing Machine (1500 KN Capacity) Digital display. For testing concrete cubes (15cm X 15cm) and cylinder(30cmX15cm), For testing cement mortar cubes (5 x 5 cm). For split cylinder tensile test 16x32cm specimen . Flexure test for 15x15 x 60cm concrete beam/timber beam (3rd point loading) also for other materials . Motorized with controllable rate of loading . Frame:steel fabrication with cover for protection. Loading Capacity: 1500KN. Platen Diameter: (200-
Japan/ UK or Equivalent
1
. Sensitivity: 0.1KN
. Measuring units: KN, lb, kg. etc.
. Minimum reading display: 0.5 KN
. Power port (RS 232C) + data downloading cable to PC alongwith software. Load Pacer: Pacing rate 2 KN / Sec to
(b) MATERIAL TESTING/SOIL MECHANICS LAB (Concrete, Highway & Soil
Total Surveying Lab:
Page 5
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
Standard Platen -Distance pieces (for testing all above Cube, Cylinder and beam Moulds) -Splitting cylinder tensile test assembly -Flexure test assembly for 15 x 15 x 60 cm beam Mortar cube test assembly: -All in working condition , installation at site -Instructional manual -Calibration of Machine is required to be done at College and calibration 2 Flexure / Tension Machine (cement, Mortar, Briquette Tensile Testing)Confirming to ASTM• Automatic Machine 0KN capacity • Application of load by a weight travelling along the beam driven by motor at a constant increasing rate.• Power supply 220V, 50Hz single phase tensile testing jaws, standard briquette mould (two parts construction complete with base plate made of steel, easy
Japan/ UK or Equivalent
1
5 Top Pan Weighting Balance Capacity 20 kg or batter • Sensitivity: 1gm • Stainless steel Pan: size 200mm to 300mm dia• Graduated beams with sliding weights complete with set of counter weights • Hook for below weighing complete
Japan/ UK/ Germany or Equivalent
3
6 Vicat ApparatusStander vicat apperatous for cement consistency and setting time tests • According to ASTM and BS specs.• The frame with scale and adjustable foot screw alongwith consistency plunger 300 gm, 10mm dia (2 set) • Initial set Needle (1, 1.13 mm dia, each set of 6 needles)• Conical mould (brass 80 mm dia and 40 mm height with a ring)• Glass base plate / cast iron (120mm
Japan/ UK/ Germany or Equivalent
8
Page 6
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
7 Lechatlier's ApparatusTo perform soundness test on cement paste according to EN Specs, comprising of:-• Standard Lechatlier mould 30mm dia & 30mm height (chromium plated brass with split cylinder fitted with two indicator stems 150mm long (3 Nos.)• Glass plate 50x50mm (2 Nos in each set) (3 sets)• 100gm weight to cover top glass plate (3 Nos.)• Standard tamping rod 17mm dia and weight 70g (01 Nos)• Lechatler water bath: stainless steel
Japan/ UK/ Germany or Equivalent
2
11 Sieve shaker• Shaker capable of accommodating eight 200 mm (8”) dia sieve plus lid and pan or sieves 300 mm (12”) dia sieves plus lid and pan• Shaking; vertical / circular or both• Timer and on –off switch• Power supply single phase, 220V, 50 Hz
Japan/ UK/ Germany or Equivalent
3
12 Speedy Moisture Content Apparatus• Moisture range 0-20%.• Gauge Division 0.2%.• Sample Weight 6g. Complete with standard testing App., guage, steel balls, weighing balance, scoop, cleaning cloth, brush, one can of calcium carbide powder (400 gm), wooden box to house the App. and
Japan/ UK/ Germany or Equivalent
8
13 Standard Proctor Compaction Apparatus: . According to ASTM specs, complete with. Standard proctor mould Dia 101.6 mm Hight 116.4 mm Vol. 944 cm3. Including body, coller, base plate,wing nuts made from cadium plated steel etc.. Standard proctor compection hammer, cadimum steel with guide sleave weight 2.94 kg dia 50.8 mm drop 304 mm. Hard rubber hand knob,
Japan/ UK/ Germany or Equivalent
8
14 Modified Proctor Compaction Apparatus:. According to ASTM specs, complete with:. Modified proctor mould Dia 152.4 mm Hight 116.4 mm
Japan/ UK/ Germany or Equivalent
8
Page 7
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
16 Constant Head Permerbility Apparatus Confirming to BS 1377:5 Complete with 3 manometer tubes, Metal stand comprising 3 constant bore tubes, meter scale, nipple and connecting tubing,
USA/ UK/ Germany or Equivalent
1
21 Soil Samling Kit, Soil Auger with head dia 80,100,150mm , 10 extension rods each 1 meter long, steel handle, 10 sampling tubes with adopter, jarring link, all accerries for taking sample, matel / wooden carrying case
Japan/ UK/ Germany or Equivalent
5
23 Standard Penetration Test ApparatusASTM/AASHTO* SPT complete with split sample spoon SPT Hammer and drilling rod of 40 - 50 with drilling rod for 40 meters.* SPT sampler consisting of:1) A tube split longitudinally into two parts, the upper end to be fitted to the rod coupling.2) Cutting shoe to be fitted to the lower end.3) Ball valve fitted to rod coupling.* Steel rod 50mm dia, 3000mm long* Nipple for 50mm dia rod* Rod coupling 50mm dia to be fitted to
USA/ EU/ UK or Equivalent
2
24 Marshal Stability Test (30KN Capacity)Loading Device, Proving Ring, Flow Meter, Test Head, Marshal Mould, Sampling Collar, Specimen Sampler, Sampling Rod, Tamper, Load Measurement(Load Ring 30KN), Flow Meter
USA/ EU/ UK or Equivalent
2
25 Saybolt ViscometerThermometer (70 - 210 F)ASTM - D88 Viscosty tube orifice, Funnel and withdrawal tube, Cooling coil, 60ml flask and digital thermoregulator.Stainless steel orifice
USA/ EU/ UK or Equivalent
2
26 Bitumen Ductility Test Apparatus Conforming AASHTO-T51• Test machine for pulling briquette of bitumen by maintain the standard temperature, speed and stroke• Water bath with thermostat• Thermometer and
USA/ EU/ UK or Equivalent
1
Page 8
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
28 Softening Point Test (Ring & Ball Apparatus) ASTM D 38two brass rings, two steel balls (9.5mm), Heater, Megnatic Stirrer Unit, ring holder thermometer, glass vessel,
USA/ UK/ Germany or Equivalent
2
30 Penetration of Bituminous Material Penetrometer, Penetration Needle (2.5 grms, water bath, thermometer 8 - 32°C timing device), (Sample Cub Dia 55 x 35mm set of 6)
USA/ UK/ Germany or Equivalent
2
32 Extraction of Bitumenfrom Bituminous pavingCentrifuge extractor confirming to ASTM D2172Bond capacity = 1500 g – 2000 g(Trichloroethylene or dichloromethane pack 10kg, 0-3600rpm, 1500gm fitter disk box of 100 liter Valuable speen driven unit 0 to 300 Spare bowel
USA/ UK/ Germany or Equivalent
2
33 Non-Destructive Test (Concrete Test Hammer)confirming ASTM, BS for testing the quality of concrete in finished structuresupply complete with carbo randum stone and plastic carrying casestrength range: 10-70 N/mm2
USA/ EU/ UK or Equivalent
2
36 Shearing Force Apparatus:Demonstration of shearing force in a loaded beam.* Two parts beams with parallelogram joint and a force gauge to measure the shearing force in the section plane* Loading with 3 appropriate weight sets with hanger, complete with all
USA/ EU/ UK or Equivalent
8
37 Bending Moment Apparatus:Demonstration of bending moment in a loaded beam* Two parts beam with special joints and forces gauge to measure bending moment in the section plane
USA/ EU/ UK or Equivalent
8
38 Loaded Beam Assembly:To determine the reaction at the supports of a beam and verify the principle of moments, comprises:* Six beams hanger
USA/ EU/ UK or Equivalent
8
Page 9
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
39 Deflection of Beam Apparatus: To show that deflection is proportional to the cube of span, and that the deflection is proportional to load complete apparatus. Comprises of:* Rigid frame (1.22x0.76m) approx. having test span of 1m* Sets of weight (up to 50Kg 4 sets)* Two steel beams of 3 & 5 mm thickness and 1.1 m length* two movable knife edge supports to carry one beam at a time* Load hangers (4 Nos)* Dial gauge with adjustable stand* complete with
USA/ EU/ UK or Equivalent
8
48 Tray (Galvanised Iron, 14 SWG) SET600X450X80mm,600X600X80mm750X750X80mm80mm hight
Pak Made/ China or
Equivalent
10
49 Pycnometer50ml (Pycnometer - specific Gravity Bottle) capacity complete with stopper capillary tube and funnel pyrex /
Pak Made/ China or
Equivalent
10
51 BeakersPyrex / Borosilicate glass with spout, 600Ml capacity graduated
Pak/ China or Equivalent
20
3 MOULDS: - e) beams 150 x 150x600mm (6"x6"x24") made of
steelPak/ China or Equivalent
10
5 Vibrating Table• to facilitate compaction of concrete in moulds • Table mounted on steel stand with clamp assembly • Vibrating surface size: 80x40cm approx.• Maximum loading capacity 20 Kg or More• 220-240v, 50 Hz, single phase.
USA/ UK or Equivalent
2
7 Slump Test Apparatus* To perform slum contest for concrete according to BS1881, ASTM-C-143 specifications consisting of:
Pak Made/ China or
Equivalent
10
(c) CONSTRUCTION LAB
Total:
Page 10
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
14 Mason Trowel* Tampered and hardened Carbon Steel Blade* Square tip blade 20-28cm long
Pak/ China or Equivalent
10
15 Chiesel Set (9"-12"-18") Pak/ China or Equivalent
10
16 Brick HammerForged steel rectangle head and tappered tip weight= 250-400gm
Pak/ China or Equivalent
25
17 HammerForged steel rectangle head and tappered tip weight= 1Kg Wooden handle (40cm long) with
Pak/ China or Equivalent
10
18 Plumb Bob* Weight = 100-130gm* Screwed Cap* Strup indicator
Pak/ China or Equivalent
25
19 Mason's Spirit Level* Aluminium = 2 ft. length* Three Vials
Pak/ China or Equivalent
25
21 Shovels with handleHardened and tempered steel blade, rounded point
Pak/ China or Equivalent
10
22 Kassi (Plies) with handleTampered and hardened steel square
Pak/ China or Equivalent
10
23 Spirit Level (Alumen 2 ft. length) Pak/ China or Equivalent
25
24 Pick AxeHardened and tamper steelShape: Chiesel end pointWight = 4 KgWooden handle= 75 cm long
Pak/ China or Equivalent
10
25 Steel float Set(Small, medium, large)Wooden Handle
Pak/ China or Equivalent
10
26 Wooden Float(small, medium, large)Wooden Handle
Pak/ China or Equivalent
25
Wooden Scaffolding for Mason
Bamboo (10 feet)Pak/ China or
Equivalent 60
27
Page 11
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
31 Mixing Spoon Setheavy guage stainless steel, 150mm, 200mm, and 250mm long, round buttom
Pak/ China or Equivalent
25
32 Tray (Galvanised Iron, 14 SWG) SET600X450X80mm, 600X600X80mm750X750X80mm 80mm hight
Pak/ China or Equivalent
20
33 Pointing Trowel* Tampered and hardened Carbon Steel Blade
Pak/ China or Equivalent
25
34 Pointing Tray Tampered and hardened steel plate with Wooden handle underneeth* Size = 400x400xthickness 3 m
Pak/ China or Equivalent
20
35 Striker for vertical joint (pointing)Tampered and hardened steel
Pak/ China or Equivalent
25
36 Striker for horizontal joint (pointing)Tampered and hardened steel
Pak/ China or Equivalent
25
-
1 ADJUSTABLE WRENCH Set• Hardened, tempered and chrome plated steel.• set including 18” (450 mm), 12” (300
Japan/ UK/ Germany or Equivalent
20
2 Pipe Wrench Chain Type• For large pipes handle and chain from carbon /drop forged steel jaws and connector’s induction harden.
Japan/ UK/ Germany or Equivalent
10
3 ADJUSTABLE PIPE WRENCH• Handle drop forged hardened and tempered,• Jaws induction hardened, • frame and handle painted,
Japan/ UK/ Germany or Equivalent
20
4 PIPE REAMER• High speed steel straight flute, • Parallel hand reamer, left hand spiral, right hand cutting, • 50 mm dia.
Pak/ China or Equivalent
10
5 PIPE VICE (STAND TYPE) Pak/ China or 10
(d) PUBLIC HEALTH ENGINEERING & HYDRAULIC LAB
Total Construction Lab:
Page 12
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
12 STEEL TAPELength 5m, with slide lock, power/automatic return, graduations on both sides in m & ft, plastic / metallic
Pak/ China or Equivalent
20
13 Mason’s Spirit Level 600 mm and 1200 mm long, one each box section level, hardened aluminum, powder coated finish, one horizontal vial
Pak/ China or Equivalent
20
16 SCREW DRIVER SET• Flat blade, flared tip.• Chrome steel blades/shafts properly tempered and hardened.• Shot blasted tips.• PVC/Polypropylene cabinet handles.One each :Length Blade diamm (in) mm (in) 75 (3) 5 (3/16)100 (4) 6 (1/4)150 (6) 8 (5/16)200 (8) 9.5 (3/8)250 (10) 9.5 (3/8)
Japan/ UK/ Germany or Equivalent
20
17 Trowel (200-280 mm long steel)For general purpose• Tempered and hardened steel.• With wooden handle.
Pak/ China or Equivalent
20
18 Mortar Pan • G.I. sheet made (22SWG).• 18” dia., 22 gauge.
Pak/ China or Equivalent
20
19 Shovel with handle9” (225 mm), square / round point, forged steel blade / D-shaped handle
Pak/ China or Equivalent
10
21 Bench Vice• 4” (100 mm) jaw width.• C.Iron body.• Steel screw.• Hardened carbon steel interchangeable
Pak/ China or Equivalent
5
27 MELTING POT• For lead , fitted with lip , handle and legs.
Pak/ China or Equivalent
4
28 LadleHeavy Forged steel bowl having a lip
Pak/ China or Equivalent
5
Page 13
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
36 METACENTRIC HEIGHT MEASURING APPARATUS: Experimental Capabilities• Determining the center of gravity of the pontoon.• Determining the meta-centric height and from this the position of the meta-centric for the pontoon.• Varying the meta-centric height with angle of heel.Consisting of: arrangement for floating pontoon, body plastic / any non-corrosive light material, vertical mast having adjustable weight/sail with a toothed sideway; plumb bob suspended at top of
Japan/ France/ UK or Equivalent
2
37 HYDROSTATIC PRESSURE APP.For totally / partially immersed surfaces comprising of: • Clear Perspex fabricated quadrant,• balance arm pivoting on knife edges;• set of weights; • Quadrant Fixed scale: calibrated from horizontal axis 160 - 200 mm, downward and 40 - 100 mm upward ,
Japan/ France/ UK or Equivalent
2
39 MANOMETER (U-TUBE)Free water manometer, standard length one meter, glanded glass manometer tubes, engraved plastic scale, calibrated
Japan/ france/ UK/ Spain or Equivalent
2
40 FLOW OVER WEIR APPARATUSExperimental CapabilitiesFlow characteristics demonstration over a rectangular notch and a vee (V) notch.Determination of the discharge coefficients.SpecificationWier Plates:Height: 160 mmWidth: 230 mmThickness: 4 mmRectangular: Notch: Height: 82 mmWidth: 30 mmAngle of vee notch weir: 90°Hook & point gauge: 0-150 mm, ±0.1 mm
Japan/ france/ UK/ Spain or Equivalent
5
41 PITOT TUBEExperimental Capabilities:• Static and Dynamic pressure measurement
Japan/ france/ UK/ Spain or Equivalent
5
Page 14
ITEMSSr # Remarks QtySpecification Unit
CostTotal Cost
without GST
Total Cost with
GST GST
45 Turbidity Test ApparatusPortable, Digital, Hand heldBattery operatedRange: 0-50 NTU and 0-1000 NTUAccuracy: ±1% of full seedsComplete with standard accessories.
Japan/ france/ UK/ Spain or Equivalent
2
-
3 Net working (Cables, connections etc) 19 Plotter LaserJet A-0 Size 110 License software for education Latest
Auto CAD 50Prima Versa 50M.S. Office 50
-
1 Instruments BoxSpecial Compass Set
Japan/ UK/ Germany or Equivalent
5
2 Tee Square(600 mm)Transparent
Local or Equivalent
5
3 Set SquareTransparent medium size (300 mm)
Local or Equivalent
5
4 TemplatesCircle Square, Hexagon, Triangle (03
Local or Equivalent
2
5 French CurvesGood Quality, medium size
Japan/ UK/ Germany or Equivalent
2
6 Clutch Pencil (0. 5 mm)
Pak/ China or Equivalent
12
7 Eraser Pak/ China or Equivalent
12
8 Sharpener Machine Local or Equivalent
5
9 Portable Drawing Board(3’x2’ with scale)
Japan/ UK/ Germany or Equivalent
5
10 Drafting Machine Elbow typeTable size A o complete with all accessories
Japan/ UK/ Germany or
1
(e) COMPUTER APPLICATION / AUTO CAD LAB
(f) DRAFTING LAB (DRAWING HALL)
Total e) Computer Application / Auto Cad
Total Public Health Engineering &
Page 1
1 Jaw Crusher, :with 3 phase 50 to 220 volt, V.Belt Drive with 3 to 3.5 jaw opening, 500 RPM speed capacity50-150 ib/hr.bench space 14.5x21 to reduce rock lamps from 2.5 dia to pass on 10 mesh or finer sieve jaws made of manganese steel
Pak/ China or Equivalent
2
2 Pulverizer:Bron/c casting steel rotor 220 volt, 3 phase, 50N, I HP Motor 2600 RPM with V.Belt drive at guards 1.00 ammeter Extra retaining screen with fabric bags for oulet mounted on legs 2 casters for easy
Pak/ China or Equivalent
1
3 Centrifugal pump: with 1/2 HP motor single phase capacity 250gal/min, 30 feet head for 220
Pak/ China or Equivalent
2
4 Sample Grinder:Open door dice tyhpe with locking hand wheel to regulate product size antiracism bearings, cast iron traction with stud dises 0 with 6" dia dise capacity 200Ib/hr at 20mesh with 2 HP motor, 220 Volt 50 N mlounted on a
Pak/ China or Equivalent
2
5 LabBall mill: for wet and dry grinding for ores etc. Sixe: 16" dia mill, 16"x16" with welded stud base extra thick shell with integral cast lifter bars. Capacity: 150Ib/hr complete wsith 250 Ib of stud balls with 1 1/2 HP 3 phase motor 550
Pak/ China or Equivalent
1
7 Sieve Shaker:Height 32" width 34" depth 17" weight in cladding 0.25 HP motor and time switch Capacity: 290Ib for 115 vac. 60HZ speet 1750
Pak Made ISO Standarised or
Equivalent
1
14 Portable mixer, with direct drive 4 inch diameter, Stainless steel propellers. 1/4 HP single phgase 50
Pak Made or Equivalent
4
15 Mixing Tank: Capacity 10 gallons stainless steel dull polished inside, Desalted ouside slopping bottom of out let connection rein forced top brim steel legs. Complete with ss cover. Outlet valve casters and mixer frame
Pak Made or Equivalent
4
19 Water Deminerilizer :Equipped with different cell shoring % sodium chloride, water in put/ Out put flow rate 501/hr power 220-240v
Germany/ Japan or Equivalent
4
20 Viscosity bath (0-40c): Sample holding capacity 4-6no thermostatic control stain less steel and glass frame for oil bath auto - stirring and their or stting. Operating voltage
Germany/ Japan or Equivalent
2
21 Visocosity bath 100c: Adjustment of set point temperature, sample holding capacity 4-6 no with timer and stirring facility, power 220v stainless steel glass body for oil contact
Germany/ Japan or Equivalent
2
COMPARATIVE STATEMENT
GCT TAXILALIST OF EQUIPMENT FOR 50 STUDENTS
RemarksSpecificationSr #
CHEMICAL TECHNOLOGY
ITEMS Total Rate without GST
Total Rate with
GSTGSTQty Unit
Rate
Page 2
RemarksSpecificationSr # ITEMS Total Rate
without GST
Total Rate with
GSTGSTQty Unit
Rate
23 Tetrameter (Automatic):Ph 0-14, mv 100-1400 with stirring system. Burette stand electrodes with stand power 220-240v
UK/ USA or Equivalent
4
26 Hand die threading set:Universal quick opening die head, with drop head threader size: 1/8 inch 1.25
Germany/ Japan or Equivalent
2
28 Smoke detector:Portable, standard Germany/ Japan 1029 Rectifier:To convert AC to DC Ac
in put 220v Dc voltage up to 12v ampere up to 500
Germany/ Japan or Equivalent
2
31 Nephlo meter (digital portable):Both for coarse and homogeneous solutions. Power
Germany/ Japan or Equivalent
1
32 Magnetic stirrers with hot plates:Electric speet regulation of 150-2000 rpm Slectable reversible stirring motion
Germany/ Japan or Equivalent
20
34 Diesel index determination Apparatus:According to A D IN / ASTM STANDARD
UK/ USA or Equivalent
2
36 Electric Drill Machine:Aluminum body type, Tap am mode with complete bit set Size: 1.5mm - 12.5mm 220v, 50-single phase
UK/ USA or Equivalent
4
42 CHEMICAL OXYGFEN DEMOND APPARATUS (Reactor +spectrophot meter)Digester / reactor with 25 vials capacity
UK/ USA or Equivalent
1
43 First aid kit:With all accessories Pak/ China or 444 Glass electrodes:Can fitted with PH
Meter and tetrameterGermany/ Japan
or Equivalent6
45 Calmel electrodes:Can fitted with PH Meter and tetrameter
Germany/ Japan or Equivalent
6
46 Paltinum ElectrodesFor conductivity bridge
Germany/ Japan or Equivalent
6
52 Viscometer Germany/ Japan 1453 Stalagmometer Germany/ Japan 2654 Kipps / Apparatus Germany/ Japan 256 Glass Cyulinder Germany/ Japan 2463 Measuring Cylinder (20mL) Germany/ Japan 1864 Measuring Cylinder (10mL) Germany/ Japan 1265 Specific Gravity Bottles (25ml) Germany/ Japan 1268 Retort Germany/ Japan 10
Page 3
RemarksSpecificationSr # ITEMS Total Rate
without GST
Total Rate with
GSTGSTQty Unit
Rate
12 Cement analyzer (computerized) UK/ USA or 113 First aid box Pak/ China or 214 Trolley (3*1.5 ft) Pak/ China or 3
1 Stainless steel portable fixer batch Pak/ China or 22 Continuous type Pak/ China or 23 Water softener (mixed bed type) Pak/ China or 24 Electronic aqua analyzer Pak/ China or 25 Cation type Pak/ China or 16 Anion type Pak/ China or 17 Vitamin tester (digital) UK/ USA or 28 Double jacketed soap pan Pak/ China or 29 Bladder Pak/ China or 110 Cake cutter Pak/ China or 111 Dye set Germany/ Japan 312 Pilot plant of ghee China or 113 Pilot plant of sugar China or 1
14 Control trainer for temperature measurement
UK/ USA or Equivalent 1
15 Control trainer for pressure UK/ USA or 116 Control trainer for flow UK/ USA or 1
1 Burner Pak/ China or 57 First aid box Pak/ China or 18 Trolley Pak/ China or 111 Boiling point apparatus Germany/ Japan 212 West paul balance Germany/ Japan 513 Density motor Germany/ Japan 214 Redwood viscometer Germany/ Japan 515 Saybolt viscometer Germany/ Japan 216 Ostwald's viscometer Germany/ Japan 5017 Staglmometer Germany/ Japan 5018 Torsion balance Germany/ Japan 5
Total:
ORGANIC PHYSICAL LAB
INDUSTRIAL CHEMICAL PROCESS LAB
Total:
Total:
Page 4
RemarksSpecificationSr # ITEMS Total Rate
without GST
Total Rate with
GSTGSTQty Unit
Rate
29 AC Germany/ Japan 2
1 Hydraulic bench and accessories UK/ USA or Equivalent 1
2 Multiple pump test Rig with UK/ USA or Equivalent 2
3 Boiler Pak/ China or 16 Water heater Pak/ China or 17 Air heater Pak/ China or 18 Climbing & falling film evaporator UK/ USA or
Equivalent 1
9 Swenson walker Crystallizer with accessories
UK/ USA or Equivalent 1
10 Vacuum Crystallizer with UK/ USA or Equivalent 1
11 Centrifuge UK/ USA or Equivalent 3
12 Plate and frame filter press with UK/ USA or Equivalent 1
13 Rotary drum filter with accessories UK/ USA or Equivalent 1
14 Leaf filter with accessories UK/ USA or Equivalent 1
15 Disc meter Germany/ Japan 216 Energy meter Germany/ Japan 217 Tachometer Germany/ Japan 218 Rotary Dryer with accessories Germany/ Japan 119 Vaccume Dryer with accessories Germany/ Japan 120 Spray dryer Germany/ Japan 121 Vacuume furnace Pak/ China or 122 Convection furnace Pak/ China or 123 Seive shaker with seive set & Pak/ China or 124 Pulverizer hammer type with Pak/ China or 125 Disc mill Pak/ China or 126 Ball mill & accessories Pak/ China or 127 Pebble mill & accessories Pak/ China or 128 Tube mill & accessories Pak/ China or 129 Blake jaw crusher (complete Pak/ China or 130 Dodge jaw crusher (complete Pak/ China or 131 First aid box Pak/ China or 132 Aluminium Ladder Pak/ China or 133 Electrician kit Pak/ China or 134 Trolly Pak/ China or 1
UNIT OPERATION LAB
Total:
COMPREHENSIVE WORKSHOP/LAB
Total:-
Page 5
RemarksSpecificationSr # ITEMS Total Rate
without GST
Total Rate with
GSTGSTQty Unit
Rate
20 Flash point tester UK/ USA or Equivalent
221 Aniline point tester UK/ USA or
Equivalent2
22 Pour point tester UK/ USA or Equivalent
223 Cloud point tester UK/ USA or
Equivalent2
24 Gate Valve Germany/ Japan 625 Globe Valve Germany/ Japan 626 Check Valve Germany/ Japan 627 Safety Valve Germany/ Japan 628 Butter fly Valve Germany/ Japan 629 Plug cock Valve Germany/ Japan 530 Expansion steam trap UK/ USA or
Equivalent6
31 Bucket steam trap UK/ USA or Equivalent
632 Impulse steam trap UK/ USA or
Equivalent6
33 Coloured photo copier UK/ USA or Equivalent
134 Liquid Print photo copier UK/ USA or
Equivalent1
35 Powder Print photo copier UK/ USA or Equivalent
136 Over Head Projector Germany/ Japan 237 Opaque projector Germany/ Japan 238 Aluminium Ladder Pak/ China or 139 Work bench Pak/ China or 240 First Aid box Pak/ China or 141 Trolly Pak/ China or 1
Grand Total:Total:
Page 1
14 IC TesterFor Test/ Checking of TTL & CMOS ICsWith all accessories and Operational Manual in English
Taiwan/ Korea /USA or
Equivalent
5
6 Microwave Guide Components Taiwan/ Korea /USA or
Equivalent
1
8 Microwave test Benches Taiwan/ Korea /USA or
Equivalent
1
Total Advance Electronic Lab:Additional Items
Sr # ITEMS Specification Total Rate
without GST GST Remarks Total Rate with
2. Telecommunication Lab:
COMPARATIVE STATEMENTLIST OF EQUIPMENT FOR 50 STUDENTS
GCT TAXILATELECOMMUNICATION TECHNOLOGY
Qty Unit Rate
Page 1
3 Mechatronics Work Cell with Machine Vision and Sensors
Taiwan/ Korea /USA or Equivalent 5
5 Manufacturing System Flexible Manufacturing System
Taiwan/ Korea /USA or Equivalent 1
Qty
COMPREHENSIVE MECHATRONICS LAB:
RemarksUnit RateTotal Rate
without GST
GST
Total
COMPARATIVE STATEMENTLIST OF EQUIPMENT
GCT TAXILAMECHATRONIC TECHNOLOGY
ITEMSSr # Total Rate with GST Specification
Page 1
6 Fletcher’s trolley with all accessories (Standard)
Pak/ China or Equivalent
12
16 Searl's apparatus/young's modulus apparatus(Standard with range of 3 kg)
Pak/ China or Equivalent
12
18 Measuring tap Pak/ China or 1219 Steel wires 0.45mm dia swg 26 steel
0.36mm dia swg 29 steel0.45mm dia swg 26 brass
Pak/ China or Equivalent
50
25 Tuning forks (25 set of 16 forks) - (consisting forks of frequency approx. (440 hz, 512 hz,480 hz)
Pak/ China or Equivalent
25
28 Thermometer (different scales) China made - ½ degree upto 110º c½ degree upto nearly240º f
Pak/ China or Equivalent
50
30 Screen Metal 300rnm x 300mm painted white
Pak/ China or Equivalent
25
31 Electrical lamp -Table lamp type adjustable height and direction
Pak/ China or Equivalent
25
32 Point source adjustment - Wooden box type (Standard)
Pak/ China or Equivalent
25
47 Spirit Level - Horizontal bubble Pak/ China or 5049 Sextant with all accessories -
Educational model (Brass frame mm, Scale reading 0 to 130 degree
Pak/ China or Equivalent
12
58 Wet and dry bulb hygrometer Pak/ China or 1259 Beakers - 250ml (Standard) Pak/ China or 5064 Resined Flannel (Standard) Pak/ China or 2
-
4 Funnel a) light glass - 3 inches or 75mm
Pak Made/ China or Equivalent
25
9 Thermometer of different scale - (110 Germany/ Japan or 44
13 Cork with hook Pak/ China or 2515 Glass Pipe Pak/ China or 10
80
10
30
49
10
CHEMISTRY LAB
2 Beaker - 250ml
GST Total Rate with GST
40
Germany/ Japan or Equivalent
Pyrex/ Germany or Equivalent
UK/ Japan or Equivalent
7
Germany / UK or Equivalent
Pak/ China or Equivalent
5
30
30
6 Filter paper - 10 x 12 inches
Pyrex/ Germany or Equivalent
Pyrex/ Germany or Equivalent
PHYSICS LAB
Description of Equipment Qty Unit Rate
Total Rate without GST Specification
3
12
1 Beaker 100 ml
Magnifying Glass - 3”
Sodium lamp (18 watt) (Standard)
LIST OF APPARATUS
Total:
5
Pyrex/ Germany or Equivalent
Pak/ China or Equivalent
COMPARATIVE STATEMENT
45
Spring balance - 100. 250, 500 gm 4
Two, Litres Measuring Cylinder or a bell jar or a long form beaker Chromatograph Tank (100ML)
Spirit lamp - With stop cork
GCT TAXILA
RemarksSr. No.
RELATED STUDIES
Beaker - 500 ml
Universal pH Paper Range - '1-14
Pak/ China or Equivalent
Pak/ China or Equivalent
16
11
12
Ostwald Viscometer
Page 2
GST
40
Description of Equipment Qty Unit Rate
Total Rate without GST Specification
3 Magnifying Glass - 3”
Sr. No.
Pak/ China or 17 Pipette 10ml Germany/ Japan or Equivalent
25
19 Analyticl / Electronic Balance - 0.1 gm to 500 gm
6
20 Crucible with lid 10
22 Pipette sucker (Digital) Germany/ Japan or Equivalent
25 -
23 Stalagmometer Germany/ Japan or Equivalent
50
24 Pinch Cock Pak/ China or 5026 Hoffman's Voltameter UK/ Japan or 1028 Battery (12 V) D.C /Adapter - 300
milliampereUK/ Japan or Equivalent
10
36 Platinum wire Pak/ China or 2540 Measuring Flask - 1000 ml Pyrex/ UK or 10
Graduated Cylinder (100 ml) Pyrex/ Germany or Equivalent
25
Graduated Cylinder (50 ml) Pyrex/ Germany or Equivalent
25
49 Fusion Tube Pak/ China or 250
55 Water Bath - Ordinary Size Japan/ UK or 20
57 Tongs Pak/ China or 25
5
10
UK/ Japan or Equivalent
Germany/ Japan or Equivalent
Pak/ China or Equivalent
5
5
5
200
Pak/ China or Equivalent
Pak/ China or Equivalent
Pak/ China or Equivalent
Stop Watch - Digital
18
21
Specific gravity bottles - 25 ml
31
32 Test Tube - 16 x 150 mm
30
Pyrex/ Pak Made or Equivalent
Test tube brush Good quality
52
20
30
5
Conical flask - 250 ml
Japan/ UK or Equivalent
56
Pyrex/ Germany or Equivalent
34
41
44
45
Dropper
Burette - 50 ml
1
Copper Foils (5cm x 3cm) - 5cm x 3cm
Pak/ China or Equivalent
Ammeter - 0-3 ampere
Pyrex/ Germany or Equivalent
Burette Stand
Page 1
9
Generator Supply of 100 KVA to 150 KVA prome power, diesle generator set.. 400/230 v, 50 Hz. 3 Phase, 1500 RPM, 0.8 Pf.. Battery tray and leads with necessary accessories.. Imported Sound proof Canopy. Designed with Modular Principles.. Easy Lifting and Move.. Supply and installation of locally fabricated ATS/AMF panel assuming one wapda meter and load of Wapda matching with Gen-set.. Construction of Civil Foundaiton Pad and ground floor (with Capacity to bear twice the weight of Gen-set). . Self Start
JAPAN/ UK/ GERMANY /TAIWAN Or Equivalent
1
14 Library Software - 1
15RFID security system(1650x320x90) with RFID Paper Tag) + double checker Fq 8.2 Mhz (SMO)
TAIWAN/ JAPAN/ UK/ GERMANY Or Equivalent 1
19 b) Smart boards (with multimedia all acessories)
TAIWAN/ JAPAN/ UK/ GERMANY Or Equivalent 6
Total:
COMPARATIVE STATEMENTLIST OF EQUIPMENT
RemarksQty Unit Rate Total Rate with GSTDescription of Equipment
GCT TAXILA
Sr. No.
OFFICE EQUIPMENT
GST Total Rate with GSTSpecification