The universal emergency luminaire
TITA
NI
UM BATTERY
W A R R A NTY
10YEAR
10110YEARYYEYEAYEAR
© C
op
yrig
ht
03/2
019
Table of Contents
Introduction to INFINITA LED solutions 2
The CableCom System 4
INFINITA LED RTI 8
INFINITA LED X5 16
Cablecom Connect APPEasy to use and intuitive interface appto programm and register luminiare parameters 24
CABLECOM control units Stand-alone version 26
CONNECT version 27
1
CablecomCablecom
WIFI
2
Endless installation options,endless application options,
endless control and diagnostic options, endless battery life and useful life
34m installation centredistance 3m h
TITANIUM BATTERY = 10 YEAR WARRANTY
RTI OpticsHigh bay light with light guide and high beam
control (Total Internal Reflection), suitable for bothwall and ceiling mounting
3
IP65 IK08UNPRECEDENTED
lightingPERFORMANCE
34minstallation
CENTRE DISTANCE
Luminous fluxes ofup to 1700 LUMENS
INFINITEbattery life
Suitable forHIGH-RISK locations
34m installation centredistance with 12m h
TITANIUM BATTERY = 10 YEAR WARRANTYLONG-LIFETITANIUM BATTERYInfinita LED is equipped with LithiumTitanate batteries to ensure topperformance guaranteed for 10 years
AT and CT IN ONELUMINAIREULTIMATE AT-LG-DALI, LOGICA24,LOGICA230, CABLECOM andCABLECOM CONNECT, revolutionary interms of easy installation and flexible use
IT NEVER GOES OFFThe first luminaire with a nominal battery lifefrom 1 to 8h. With Infinity Mode, the batterylife becomes infinite
FLEXIBLE INSTALLATIONAccessories for any type of mounting:wall, ceiling, edge, suspended. 5 inlets for M20 cable glands, 5 inlets for 16and 20 mm wireways
X5 OpticsInterchangeable central lens that can create 5different controlled light beams for EmergencyExit Routes and Large Areas
4
BeghelliNew Centraltest system with intelligent diagnosis.Simple, reliable, revolutionary
Open Settings: using the App or with a simple screwdriverOpen Settings: using the App or with a simple Screwdriver No
constraints: Infinita LED can be installed in the CentralTest mode
in conjunction with the Cablecom control unit, which
exponentially increases the possibilities of parameter and test
management and control. When installing the luminaire without
the control unit, it shall be set to the Autotest mode that allows
adjusting its battery life from 1 to 3h using a circuit jumper or the
latest CableCom Connect APP that also provides additional
features. Turn your smartphone into an actual remote control and
set all the lamp parameters: Battery life from 1 to 8h, SE or SA
Operation, RestMode, launch battery life or functional Tests or
disable the emergency mode (Inibit).
The system uses the flash of any mobile phone to communicate
the data to be set to the luminaire. The APP is also designed to
detect the QR codes used to uniquely identify each luminaire.
This option allows keeping records of the luminaires installed, a
useful feature for the filling in of the System LogBook required by
standard EN UNI 11222. The same operations can be
centralised and organised in a simple and intuitive manner by
connecting the system to a CableCom or CableCom Connect
Control Unit.
Manual programming Programming via remote control
(Smartphone+App)
TitaniumAnodeBattery
10 year warranty with Titanium batteryThe new Titanium Beghelli battery differs from
standard rechargeable battery due to the
balance system and charge check system
(Battery Management System).
1 - Quick charge: The autonomy of luminaire
reaches 80% of nominal duration in less
than 3 hours of charging
2 - Extreme operating temperature: The titanium
battery can operate in extreme temperature from
-30°C up to +75°C. When installed into
luminaires, this battery grants a good performance
in ambient temperature from -20°C to +50°C.
3 - Long life thanks to built in battery
management system: 7.000 recharging
cycles, thanks to the electronic check of
balance and of phases of charge and discharge
with shortcircuit protection.
4 - Maximum reliabilty: The materials used in
these Titanium batteries do no react in the event
that a short circuit or other accidental event
occur.
10 YEAR WARRANTY
5
AUTOTEST CENTRALTEST
Luminaire Luminaire + App Luminaire + Control unit Luminaire + App+ Connect Control unit
Infinity Mode
Automaticperiodic test
Adjustable battery life 1h / 3h 1/1,5/2/3/8h 1/1,5/2/3/8h 1/1,5/2/3/8h
Functional TEST start
Battery life TEST start
TEST Synchronisation
TEST Scheduling
Rest Mode
Even/Odd Setting
Centralised errornotification
System data report
System log(Log Book)
CablecomCablecom
The simplicity of CABLECOM smart controlThe first BUS control system without BUS cables
Revolutionary control system able to communicate with the
luminaires by means of a BUS system that uses the emergency
electrical system for data transmission. The connection between
the CABLECOM Control unit and the luminaires is made by
switching the two power cables into communication BUSES in
such a way as to avoid any possibility of interference between the
transmission of data and the passage of current. The control unit
can be used to set all lamp parameters (Battery Life, Operation,
Functional and battery life test start) on all the luminaires at the same
time and receive malfunction warnings after the Emergency status
test.
In the Connect version of the Control unit, the App can be used to
obtain setting and error log reports on all the luminaires available in
the system. It can also be used to automatically create a LogBook
file to be attached to the safety documentation required by
Standard UNI 11222.
Performance flexibility for multiple functionsThe same luminaire can be integrated progressively with the App and the Control Unit
CablecomCablecom
AT/CT
L1L2L3N
CABLECOM
MainDistribution
Light Switch
ROOM 1
ROOM 2
L1L2L3N
CABLECOM Light Switch
6
The system diagram clearly shows the simplicity of the
Cablecom system. The power cord for normal lighting is the
same on which the control unit transmits data for the control of
the Infinita LED emergency luminaires.
The Control Unit can be used to run different types of
diagnostics, change the emergency luminaire settings and, for
Cablecom Connect Control Unit, also generate reports on all the
system data and automatic test Log Books, as required by
Standard UNI EN 11222.
BeghelliThe CentralTest with the best quality-price ratio ever
ROOM 1
L1L2L3N
CABLECOM
MainDistribution
Light Switch
Local Distribution
ROOM 2
Light Switch
Local Distribution
7
The Infinity Mode function can be activated on all Infinita LED
luminaires on both AT (via Beghelli Cablecom APP) and CT
versions, by enabling the mode from the control panel of the
Cablecom or Cablecom Connect Control Unit. Thanks to the
Cablecom communication BUS, which allows using the
power supply cables for data transmission, in the event of a
local blackout, the fault detected via the Infinity input
activates the emergency operation. Once the nominal
battery life ends, the Cablecom Bus will provide the
energy necessary to keep the luminaire on for an
unlimited amount of time (with reduced luminous flux
and provided that the Cablecom BUS line is powered).
InfinityModeThe Cablecom function that never leaves you in the dark
8
The Infinita LED RTI was namedafter its revolutionary optical
system: Total Internal Reflection.Light diffusion system that coversthe LED source to prevent glare
also allows increasing theinstallation centre distance of the
luminaires both in emergencysituations and along emergencyexit routes. The entire Infinita LED
line of luminaires has beendesigned to have no limitations on
use or installation. Limitlesselectrical connection and
positioning possibilities in differentarchitectural environments; the
control system can be upgradedfrom AutoTest to CentralTest usingthe Cablecom Control unit that isbased on simple manual or APP
programming.All Infinita LED products are
guaranteed for 10 years thanks tothe Lithium Titanate Battery
included in the standard supplypackage
The highest installation centredistance in its category
Infinita LEDRTIRugged
and versatile
9
TITA
NI
UM BATTERY
W A R R A NTY
10YEAR
1010
infinita leD rTi
GenerAl ChArACTerisTiCs
Power* 11, 24, 36W
Power supply*** 230Vac ± 10% 50/60Hz
Operation*** Non-maintained (SE),
Maintained (SA), Public Entertainment
(PS): only the Ultimate vers.
Conformity EN 60598-1, EN 60598-2-2,
EN 60598-2-22, UNI EN 1838,
UNI 11222, EN 62034
Degree of protection IP65, IK08
Battery life CableCom vers. 1h, 1,5h, 2h, 3h, 8h
Infinity mode
Ultimate vers. 1h, 1,5h, 3h
With Autoripara Battery: 2h, 3h, 6h
Overtime function
Charging time CableCom vers. L, GL: 24h - XL: 12h
Ultimate vers. 6h
12h (with Autoripara battery)
Ambient -20°C ÷ +50°C (Titanium Battery)
temperature***
Mounting wall, suspended ceiling, recessed,
false ceiling, wall edge, ceiling edge,
suspended, suspended with rods
Body Polycarbonate, white RAL 9003
Optics RTI= Total Internal Reflection
anti-glare
Screen Clear polycarbonate
Light source LED - 4000K
** Indicative power for comparison with fluorescent tube luminaires
*** Centralized systems are not included (LOGICA 230, LOGICA 24 AND HT)
for which the parameters refer to the connected central console
Optical RTI (Total Internal Reflection) anti-glare system and high-efficiency
LED battery. This innovative optical system provides not only very
uniform lighting but also optimal performance in both wall and ceiling-
mounted versions on emergency exit routes and in large areas, making
it possible to increase the centre distance between the luminaires. The
body is particularly rugged (IK08-IP65) and provided with several inlets
both on its sides and at the back to ensure quick and optimal wiring
under any installation conditions. The wide range of accessories makes
it possible to solve any issues related to emergency lighting and safety
signs. With the LTO (Lithium Titanate) battery you can obtain the
technical framework of an absolute luminaire that has no limitations on
use. Quality guaranteed for 10 years.
CABLECOM version
As standard, it is an AT luminaire with 1h battery life but the jumper can
be used to increase the battery life to 3h. The App or the CableCom
Connect control unit can be used to adjust all the parameters of the
lamp.
ULTIMATE version
Supplied in the centralised version (LG) configured automatically to
Autotest (AT) version unless connected to a control unit. The luminaire
can be transformed from LG into LGFM with the use of only one
accessory. The circuit also allows customising the luminaire according to
the requirements of use by adjusting its battery life (1h/1,5h/3h) and, on
SA versions, it is also possible to switch to PS version, adjusting the light
intensity as desired. The battery life can be doubled and the
luminous flux can be increased by adding the Autoripara Battery to
the standard battery.
L H
B
4681 SCREEN EDGE MOUNTING 250M4683 INFINITA LED RECESS BOX4687 PLASTERBOARD RECESSED MOUNTING BRACKET4686 EDGE MOUNTING FIXING BRACKET4685 INFINITA LED 45° BRACKET3912 PROTECTIVE GRILLE (440X215X99)4315 SUSPENDED MOUNTING RODS 250mm4316 SUSPENDED MOUNTING RODS 500mm4317 SUSPENDED MOUNTING RODS 1000mm3723 SUSPENDED MOUNTING HOOKS
Accessories to be ordered separately
Order Code Description
15037 LGFM MODULE15038 DALI MODULERA04 ADDITIONAL LTO 9.6V 1.2AH BATTERY
Ultimate Accessories to be ordered separately
Order Code Description
20150 CABLECOM CONTROL UNIT20151 WIFI/BLE CONNECT CABLECOM CONTROL UNIT
CableCom Accessories to be ordered separately
Order Code Description
- CABLE GLAND MEMBRANE M16 IP65- CABLE GLAND M20 WITH VENT- WIREWAY ADAPTER 16/20 WHITE4682 INFINITA LED STICKERS LH, RH, BTM, UP
(included only for SA version)
Accessories included
Order Code Description
UVIP65 IK0810h
11/24/36 325 130 45 25
Power** • Dimensions (mm) • Distance of visibility (DV) W L B H screen
AT/CT
TITA
NIUM BATTERY
W
A R R A N TY
10YEAR
1111
The mechanics of the lamp body has been studied in collaboration
with a team of installers who have tested its versatility. Power supply
inlets provided on every side, suitable for any type of wireway (16-
20mm) or direct cable (M20 cable gland). The opening system has 4
snap hooks that allow access to the reflector and to the lamp circuit
for wiring and manual adjustments (when not using the Cablecom
Connect APP)
QUICK INSTALLATION AND WIRING
PRESTAZIONI ILLUMINOTECNICHE SENZA PRECEDENTI
A Inlets with M20 cable gland
B Inlets for 16 ÷ 20 mm wireways
AA
A
B
B
B
3m
14,5m
14,5m
5 lux on working plane with reflections
3 m
5 lux on working plane with reflections
10 m
44 m
24 m
12 m
22m
18m
0,5 lux according to UNI EN 1838 Norm
12 m
0,5 lux according to UNI EN 1838 Norm
10 m
60 m
34 m
UNPRECEDENTED LIGHTING PERFORMANCE
1212
4687 PLASTERBOARD RECESSED MOUNTING BRACKET to be ordered separately 4681 SCREEN EDGE MOUNTING 25m to be ordered separately
CEILING EDGE MOUNTING
4687 PLASTERBOARD RECESSED MOUNTING BRACKET to be ordered separately
FALSE CEILING RECESSED MOUNTING
Dima di foratura in dotazione: 308x114 mm
4685 INFINITA LED 45° BRACKET to be ordered separately
45° MOUNTING
3723 SUSPENDED MOUNTING HOOKS to be ordered separately
SUSPENDED MOUNTING
4315 SUSPENDED MOUNTING RODS 250mm to be ordered separately
4316 SUSPENDED MOUNTING RODS 500mm to be ordered separately
4317 SUSPENDED MOUNTING RODS 1000mm to be ordered separately
SUSPENDED MOUNTING WITH RODS
4686 EDGE MOUNTING FIXING BRACKE to be ordered separately 4681 SCREEN EDGE MOUNTING 25m to be ordered separately
EDGE MOUNTING
3912 PROTECTIVE GRILLE (440X215X99 MM) to be ordered separately
PROTECTIVE GRILLE
4683 INFINITA LED RECESS BOX to be ordered separately
RECESSED MOUNTING
Foro incasso: 326 x 132 x 40 mm
1313
15037 LGFM MODULE only for ULTIMATE version
MODULO LGFM
15038 DALI MODULE only for ULTIMATE version
MODULO DALI
20150 CABLECOM CONTROL UNIT only for CABLECOM version
CABLECOM CONTROL UNIT
20151 WiFi / BLE CABLECOM CONNECT CONTROL UNIT only for CABLECOM version
CABLECOM CONNECT CONTROL UNIT
WIFICablecomCablecom
11 24
31170 INFINITA RTI LGS230 SE/SA L 16 500 4,5 8,6 0,6 1/6 31171 INFINITA RTI LGS230 SE/SA XL 16 1400 15,1 16,3 0,6 1/6
LOGICA 230 230V Central Battery System N° Luminous Flux Absorption Absorption Weight PackOrder code Description of LEDs SA lm (DC) W (SA) VA kg
W**
11 24
32110 INFINITA RTI LGS24 SE L 16 500 - 3,9 - 0,6 1/6 32111 INFINITA RTI LGS24 SE/SA XL 16 500 1400 4,3 15,2 0,6 1/6
LOGICA 24 24V Central Battery System N° Luminous Flux SE lm Luminous Flux Absorption Absorption Weight Pack Order code Description of LEDs max SA lm max (DC) W (SA) VA kg
W**
11 24
31174 INFINITA RTI HT L 16 500 4,5 9 0,6 1 31175 INFINITA RTI HT XL 16 1400 15,1 14,9 0,6 1
HT 230 Mains voltage N° Luminous Flux Absorption Absorption Weight PackOrder code Description of LEDs SA lm (DC) W (SA) VA kg
W**
11 24 11 24 24GL
19450 INFINITA RTI IP65 SE CBL LTO L SE 1, 1,5, 2, 3, 8 4,8V 0,5Ah LTO 16 250/170/130/90/40 1 0,6 1/6 19451 INFINITA RTI IP65 SE CBL LTO XL SE 1, 1,5, 2, 3, 8 4,8V 1,2Ah LTO 16 500/340/260/180/70 2,6 0,6 1/6 19452 INFINITA RTI IP65 SA CBL LTO L SE/SA 1, 1,5, 2, 3, 8 4,8V 0,5Ah LTO 16 250/170/130/90/40 90 1,8 0,6 1/6 19453 INFINITA RTI IP65 SA CBL LTO XL SE/SA 1, 1,5, 2, 3, 8 4,8V 1,2Ah LTO 16 500/340/260/180/70 250 4,8 0,6 1/6 19460 INFINITA GL RTI SE/SA CBL LTO SE/SA 1, 1,5, 2, 3, 8 2x4,8V 1,2Ah LTO 16 1000/680/525/370/145 250 4,8 0,6 1/6
Cablecom Autotest/Centraltest N° Average luminous Average luminous Max. Weight PackOrder code Description Version Battery life Battery of LEDs flux SE lm flux SA lm Absorption W kg
W**
36
LOGICA Ultimate Autotest/Centraltest, DALI W**
N° Average luminous Average luminous flux SE lm Average luminous Max. Weight PackOrder code Description Version Battery life Battery of LEDs flux SE lm Impostazione ALTO FLUSSO flux SA lm absorption W kg
19470 INFINITA ULTIMATE RTI SE/SA LTO SE/SA/PS 1/1,5/3h* 9.6V 1.2AH LTO 16 850/600/350 1700/1150/620 850 7/13 0,6 1/6
* The battery life doubles with the Autoripara battery, if the luminaire is set on LONG OPERATING TIME
DOUBLE THE OUTPUT FLUX
14
15
16
17
Infinita LED X5 was born from thedesire to provide multiple light
options with a single luminaire. Fiveinterchangeable optics included toradically change the shape of thelight beam, with the possibility toincrease the installation height or
the centre distance betweenluminaires along emergency exit
routes. The entire Infinita LED line ofluminaires has been designed to
have no limitations on use orinstallation.
Limitless electrical connection andpositioning possibilities in differentarchitectural environments; the
control system can be upgradedfrom AutoTest to CentralTest usingthe Cablecom Control unit that isbased on simple manual or APP
programming.All Infinita LED products are
guaranteed for 10 years thanks tothe Lithium Titanate Battery
included in the standard supplypackage
5 interchangeable optics
Infinita LED X5Rugged
and versatile
TITA
NI
UM BATTERY
W A R R A NTY
10YEAR
GenerAl ChArACTerisTiCs
Power* 24, 36W
Power supply*** 230Vac ± 10% 50/60Hz
Operation*** Non-maintained (SE),
Maintained (SA), Public Entertainment
(PS): only the Ultimate vers.
Conformity EN 60598-1, EN 60598-2-2,
EN 60598-2-22, UNI EN 1838,
UNI 11222, EN 62034
Degree of protection IP65, IK08
Battery life CableCom vers. 1h, 1,5h, 2h, 3h, 8h
Infinity mode
Ultimate vers. 1h, 1,5h, 3h
With Autoripara Battery: 2h, 3h, 6h
Overtime function
Charging time CableCom vers. L, GL: 24h - XL: 12h
Ultimate vers. 6h
12h (with Autoripara battery)
Ambient -20°C ÷ +50°C (Titanium Battery)
temperature***
Mounting Wall, suspended ceiling, recessed,
false ceiling, suspended, suspended with
rods
Body Polycarbonate, white RAL 9003
Optics Lens in transparent polycarbonate
Screen Clear polycarbonate
Light source LED - 4000K
** Indicative power for comparison with fluorescent tube luminaires
*** Centralized systems are not included (LOGICA 230, LOGICA 24 AND HT)
for which the parameters refer to the connected central console
18
infinita leD X5
X5 optical system, with 5 interchangeable lenses included that allow to
radically change the area of intervention of the light beam. The set
includes lenses for installation heights from 2 m to over 6 m. This
innovative optical system offers optimal performance in emergency exit
routes, with intervention areas up to 18m long, and in large areas,
covering surfaces of up to 50sqm.
The body is particularly rugged (IK08-IP65) and provided with several
inlets both on its sides and at the back to ensure quick and optimal
wiring under any installation conditions. The wide range of accessories
makes it possible to solve any issues related to emergency lighting.
With the LTO (Lithium Titanate) battery you can obtain the technical
framework of an absolute luminaire that has no limitations on use.
Quality guaranteed for 10 years.
CABLECOM Version
As standard, it is an AT luminaire with 1h battery life but the jumper can
be used to increase the battery life to 3h. The App or the CableCom
Connect control unit can be used to adjust all the parameters of the
lamp.
ULTIMATE version
Supplied in the centralised version (LG) configured automatically to
Autotest (AT) version unless connected to a control unit. The luminaire
can be transformed from LG into LGFM with the use of only one
accessory. The circuit also allows customising the luminaire according
to the requirements of use by adjusting its battery life (1h/1,5h/3h) and,
on SA versions, it is also possible to switch to PS version, adjusting
the light intensity as desired. The battery life can be doubled and
the luminous flux can be increased by adding the Autoripara
Battery to the standard battery.
- MEMBRANA PRESSACAVO M16 IP65- ADATTATORE TUBO 16/20 BIANCO- LENTE LARGALUCE - montata di serie- LENTE LUNGALUCE (A)- LENTE ALTORISCHIO (B)- LENTE EXTRA LUNGALUCE (C)- LENTE EXTRA LARGALUCE (D)
Accessories included
Cod. Ord. Descrizione
L H
B
24/36 325 130 45
Power** • Dimensions (mm) • W L B H
4683 INFINITA LED RECESS BOX4687 PLASTERBOARD RECESSED MOUNTING BRACKET4685 INFINITA LED 45° BRACKET3912 PROTECTIVE GRILLE (440X215X99)4315 SUSPENDED MOUNTING RODS 250mm4316 SUSPENDED MOUNTING RODS 500mm4317 SUSPENDED MOUNTING RODS 1000mm3723 SUSPENDED MOUNTING HOOKS
Accessories to be ordered separately
Cod. Ordine Descrizione
15037 LGFM MODULE15038 DALI MODULERA04 ADDITIONAL LTO 9.6V 1.2AH BATTERY
Ultimate Accessories to be ordered separately
Cod. Ordine Descrizione
20150 CABLECOM CONTROL UNIT20151 WIFI/BLE CONNECT CABLECOM CONTROL UNIT
CableCom Accessories to be ordered separately
Cod. Ordine Descrizione
UVIP65 IK0810hAT/CT
TITA
NIUM BATTERY
W
A R R A N TY
10YEAR
7 m
22 m
10lx 1h 5lx 2h
3 m
with reflectionscalculation plan
12 m
6 m
1 lux according to UNI EN 1838 Normfloor54 m
34 m
LENTE LUNGALUCE (A)
Lens efficiency 85%
22m
22m
12 m
0,5 lux according to UNI EN 1838 Normfloor
LENTE EXTRA LARGALUCE (D)
Lens efficiency 87%
7 m
Ø 3m
30lx minimi
according to UNI EN 1838 Normcalculation plan
LENTE ALTORISCHIO (B)
Lens efficiency 87%
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
Diagram polar4x18W
300
600
750
450
150
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
Diagram polar
300
600
750
450
150
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm Diagram polar
300
600
750
450
150
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
Diagram polar
300
600
750
450
150
- fitted as standard
Lens efficiency 90%
7 m
13m
13m 5lx medi
with reflectionscalculation plan C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm Diagram polar
300
600
750
450
150
19
LARGALUCE LENS
LUNGALUCE LENS (A)
LENTE EXTRA LUNGALUCE (C)
Lens efficiency 85%
DIFFERENT INSTALLATIONS WITH CODE 19471 (AUTONOMY 1H)
ALTORISCHIO LENS (B)
EXTRA LARGALUCE LENS (C)
EXTRA LARGALUCE LENS (D)
20
3912 PROTECTVIE GRILLE (440X215X99 MM) to be ordered separately
PROTECTIVE GRILLE
4683 INFINITA LED RECESS BOX to be ordered separately
RECESSED MOUNTING
4687 PLASTERBOARD RECESSED MOUNTING BRACKET to be ordered separately
FALSE CEILING RECESSED MOUNTING
Drilling tool included: 308x114 mm
45° MOUNTING
4315 SUSPENDED MOUNTING RODS 250mm to be ordered separately
4316 SUSPENDED MOUNTING RODS 500mm to be ordered separately
4317 SUSPENDED MOUNTING RODS 1000mm to be ordered separately
SUSPENDED MOUNTING WITH RODS
Recessed mounting hole:326 x 132 x 40 mm
3723 SUSPENDED MOUNTING HOOKS to be ordered separately
SUSPENDED MOUNTING
21
24 31172 INFINITA 5X LGS230 SE/SA XL 4 1200 15,1 16,3 0,6 1/6
LOGICA 230 230V Central Battery System N° Luminous Flux Absorption Absorption Weight PackOrder code Description of LEDs SA lm (DC) W (SA) VA kg
W**
24 32112 INFINITA 5X LGS24 SE/SA XL 4 500 1200 4,3 15,2 0,6 1/6
LOGICA 24 24V Central Battery System N° Reduced SE Luminous Flux SE lm Luminous Flux Absorption Absorption Weight PackOrder code Description of LEDs luminous flux max SA lm max (DC) W(SA) VA kg
W**
24 31176 INFINITA 5X HT XL 4 1200 15,1 14,9 0,6 1/6
HT 230 Mains voltage N° Luminous Flux Absorption Absorption Weight PackOrder code Description of LEDs SA lm (DC) W (SA) VA kg
W**
24GL 19461 INFINITA GL 5X SE/SA CBL LTO SE/SA 1, 1,5, 2, 3, 8 2x4,8V 1,2Ah LTO 4 900/600/470/330/130 250 4,78 0,6 1/6
Cablecom Autotest/Centraltest N° Average luminous Average luminous Max. Weight PackOrder code Description Version Battery life Battery of LEDs flux SE lm flux SA lm Absorption W kg
W**
15037 LGFM MODULE only ULTIMATE version
LGFM MODULE
15038 DALI MODULE only ULTIMATE version
DALI MODULE
20150 CABLECOM CONTROL UNIT only CABLECOM version
CABLECOM CONTROL UNIT
20151 CABLECOM CONNECT CONTROL UNIT WiFi / BLE only CABLECOM version
CABLECOM CONNECT CONTROL UNIT
WIFICablecomCablecom
RADDOPPIA IL FLUSSO
36
LOGICA Ultimate Autotest/Centraltest, DALI W**
N° Average luminous Average luminous flux SE lm Average luminous Max. Weight PackOrder code Description Version Battery life Battery of LEDs flux SE lm Impostazione ALTO FLUSSO flux SA lm absorption W kg
19471 INFINITA ULTIMATE 5X SE/SA LTO SE/SA/PS 1/1,5/3h* LTO 9.6V 1.2AH 4 750/500/300 1500/1000/550 700 7/13 0,6 1/6
* The battery life doubles with the Autoripara battery, if the luminaire is set on LONG OPERATING TIME
DOUBLE THE OUTPUT FLUX
2222
2323
App in AT mode,used as a lamp remote control
List of configuration parameters to be sent to
the emergency lamp by optical control
Emergency lamp framed to start
a functional test
List of test types (functional or battery life) to be
run on the emergency lamp
2424
CableCom Connect App Easy to use and intuitive interface app that allowsto use the smartphone as a remote control
With Beghelli Cablecom you can interact directly with each
individual emergency lamp by one-way optical communication.
You will, therefore, be able to modify the configuration
parameters of each individual luminaire, start diagnostic tests
and run other advanced functions.
CablecomCablecom
App in the CT mode, connected to theCablecom Connect Control Unit
List of operations that can be performed on
the system after connecting to the CableCom
Connect control unit
List of the logbooks available on the control
unit for download in pdf format
Cablecom system configuration with an
indication of the number of lamps to be
purchased and the corresponding
battery life options.
2525
... and in an actualsystem diagnostic control unit
For full control of the “CableCom” centralised system, connect the app to the
“CableCom Connect” control unit.
Use the WiFi technology of the control unit to configure the entire system
automatically, run functional and battery life tests, modify the parameters of any
luminaire and enable advanced features such as the innovative "Infinity Mode”
function that provides infinite battery life.
The Cablecom Connect app is the ideal tool for system maintenance: with a simple
click you can download the periodic maintenance log in pdf format, ready for printing
or storage.
2626
71 60 90 150
• Dimensioni (mm) • Peso L B H g
H
BL
CableCom Control Unit CableCom
TeChniCAl speCifiCATions
Power supply*** 230Vac ± 10% 50/60Hz
Max. Absorption 4,5W
Power factor 0,44
Maximum number 32
of luminaires that
can be controlled
Maximum output 5A
current
Max. cable section 2,5 mm2
(in and out)
Mounting 4 DIN modules
Backup battery LiFe 3.2V 60mAh - autonomy 7 days
for system in case of power failure
clock
*** input Circuit Breaker Recommended (Curve B, C or D) 6A
Centralised emergency lighting control system that can be used to
test the Emergency luminaires and signs.
The great innovation of this system consists in the use of the electrical
network as a communication BUS thanks to a smart system that
enables the system to play a double role. During testing, the system
is put in emergency mode and, therefore, disconnected from the
mains; at the same time, the Control Unit runs the necessary checks
on the luminaires using the wires, temporarily not used for power
supply, as a dedicated luminaire control system via BUS. In the event
of a fault, a light will turn on on the control unit panel to indicate that
a malfunction has been detected on one of the luminaires; the faulty
luminaire will then be identified by the indicator light installed on it.
This is a highly reliable system, simple to install and economic.
Simplified programming: simply set the number of luminaires and
launch the self-acquisition feature of the system.
20150 CABLECOM CONTROL UNIT 150 1
Cablecom Cod. Ordine Descrizione Peso g Imballo
27
H
BL
20151 CABLECOM CONNECT CONTROL UNIT 160 1
Cablecom WiFI
Order Code Description Weight g Pack
CableCom Connect Control Unit CableCom
TeChniCAl speCifiCATions
Power supply*** 230Vac ± 10% 50/60Hz
Max. Absorption 5,5W
Power factor 0,44
Maximum number 32
of luminaires that
can be controlled
Maximum output 5A
current
Max. cable section 2,5 mm2
(in and out)
Mounting 4 DIN modules
Backup battery LiFe 3.2V 60mAh - autonomy 7 days
for system in case of power failure
clock
*** input Circuit Breaker Recommended (Curve B, C or D) 6A
Centralised emergency lighting control system that can be used to
test the Emergency luminaires and signs.
The great innovation of this system consists in the use of the electrical
network as a communication BUS thanks to a smart system that
enables the system to play a double role. During testing, the system
is put in emergency mode and, therefore, disconnected from the
mains; at the same time, the Control Unit runs the necessary checks
on the luminaires using the wires, temporarily not used for power
supply, as a dedicated luminaire control system via BUS. If a fault is
detected, the test results, together with all the parameters of the lamp
and of the system will be sent via WiFi (including the location of the
luminaires).
It can be used to keep a logbook as required by standard EN UNI
11222, with the possibility to download the document in pdf form for
storage.
it can be used to manage the commands sent to one particular
luminaire or broadcasted to several devices.
WIFI
CablecomCablecom
71 60 90 160
• Dimensions (mm) • Weight L B H g
CableCom Connect App
With CableCom Beghelli each emergency
luminaire can communicate by means of
monodirectional optical communication
system.
By this system it is possible to modify the
settings of emergency luminiare
parameters, run functional and autonomy
tests and other functions.CablecomCablecom
EASY TO USE AND INTUITIVE!EASY TO USE AND INTUITIVE!
28
The universal emergency luminaire
Infinita LED RTI
Infinita LED X5
10110YEARYYEYEAYEAR
29
830.144.000
BEGHELLI S.p.A. - Via Mozzeghine 13/15 - 40053 Valsamoggia località Monteveglio
Bologna - Italy - Tel. +39 051 9660411 - Fax +39 051 9660444 - www.beghelli.com