Transcript

• High output without IBC

• Excellent thickness &

GSM variation without

expensive automation

• Low cost of conversion

• Low wastage

A N e w S t a n d a r d i n B l o w n F i l m Te c h n o l o g y

Three LayerBlown Film Plant

MAMATA EXTRUSION SYSTEMS PVT. LTD.(Formerly known as Mamata Brampton Engineering Pvt. Ltd.)

5/1/1A/1, Phase-1, G.I.D.C., Vatva, Ahmedabad - 382 445, India.Phone : +91-79-6630 9800 • Fax : +91-79-2583 2026E-mail : [email protected] • Website : www.mamataextrusion.com

A N e w S t a n d a r d i n B l o w n F i l m Te c h n o l o g y

01/2

013

mar

g

We continue to offer Customized High End lines so that you can produce what you want to sell...No of Layers : 2 to 7Width : 1000 mm to 3000 mmOutput Range : 180 kg/hr to 1000 kg/hrExtruders : 50 mm to 150 mmDie (Spiral Mandrel) : 180 mm to 850 mmStreamlined Coextrusion Dies (SCD) : Through BE, CanadaCooling Ring : Eliminator Air RingIBC : 4+1 Pancake IBC / Anti Block IBCAuto Gauge Control System : Auto Gauge Control Systems through Heated Die Lip or Segmented Air RingCage : Roller typeHaul Off : Vertical Oscillating Haul Off / Horizontal Oscillating Haul OffWinder : Surface Winders from 1150 to 3125 mm widthStructure : Prefabricated towerControls : Panel type line controls / Computerized SCADA controlsOthers : We can also offer turnkey solutions including all other automations / auxiliaries / utilities upon request

* Performance depends on various Raw Material combinations and Processing Parameters. The technical data and specifications given are subject to change without prior notice. Refer to your customized offer for scope of supply and other details.

Three LayerBlown Film Plant

Technical Specifications (Non IBC)Line Width (mm) 1150 1450 1750 1950

Maximum Layflat Width (mm) 1100 1400 1700 1900

Extruder Options (mm) 50 / 50 / 50 50 / 65 / 50 65 / 65 / 65 65 / 75 / 65

Die Size (mm) 250 350 400 475

Maximum Output (Kg/hr)* 150 - 180 250 - 280 280 - 310 350 - 380

Plant Dimension (L x W x H - mtrs) 13 x 8.5 x 9.5 14 x 8.5 x 10.3 14 x 9 x 13.5 15 x 10.5 x 15.5

1) Adhesive Lamination - Films for lamination with PET / BOPP / Alu Foil / Paper / PE

2) Heat & Pressure Lamination - Films for Cable wrap, Pharma films to be laminated with Aluminium foil

3) Surface Printed - Films for preform bags / pouches or films in roll forms for FFS applications e.g. Milk, Edible Oil, Food Products, etc.

4) Special Application Films (i) Collation Shrink Films (ii) Stretch Cling Films (iii) Industrial Liners etc.

5) Any other applications using blends of LL / LD / HD / PP / Sealent polymers / Additives / Masterbatches etc.

Advantage 1

Any blown film manufacturer wishes to produce good quality film acceptable to customers athighest possible output at lowest possible investment. This advantage is key to their success.

is our attempt to achievethis combination.

Advantage 2

It has almost become mandatory to use very expensive control devices on blown film lineslike IBC, Auto Thickness Control, Auto WidthControl, Gravimetric Feeding Systems, etc.These highly advanced devices deliver excellent quality of film but the investment is high and is justified only on very high output (500 Kg and above) lines.

achieves very tight Thicknessand GSM variation and Outputs (180-380 Kg/hr)by simply using superior harmonization ofDrives, Extruders, Die and Cooling Ring package based on optimized design and our vastexperience.

Advantage 3

The focus is on achieving lowest possible conversion cost using fundamentals of extrusion technology. achievesthis by offering power consumption of lessthen 0.32 Kwh/kg.

Advantage 4

The line can be Customized with wide selectionof Screw sizes (40mm, 50mm, 65mm and 75mm), Die sizes (180mm to 500mm) to achieve desired Outputs and Layer Thickness Ratios for optimum performance and cost.

Three Layer Blown Films to be run on

Spiral Mandrel Die Eliminator Air Ring

T h r e e L a y e r B l o w n F i l m P l a n t

• High output without IBC

• Excellent thickness &

GSM variation without

expensive automation

• Low cost of conversion

• Low wastage

A N e w S t a n d a r d i n B l o w n F i l m Te c h n o l o g y

Three LayerBlown Film Plant

MAMATA EXTRUSION SYSTEMS PVT. LTD.(Formerly known as Mamata Brampton Engineering Pvt. Ltd.)

5/1/1A/1, Phase-1, G.I.D.C., Vatva, Ahmedabad - 382 445, India.Phone : +91-79-6630 9800 • Fax : +91-79-2583 2026E-mail : [email protected] • Website : www.mamataextrusion.com

A N e w S t a n d a r d i n B l o w n F i l m Te c h n o l o g y

01/2

013

mar

g

We continue to offer Customized High End lines so that you can produce what you want to sell...No of Layers : 2 to 7Width : 1000 mm to 3000 mmOutput Range : 180 kg/hr to 1000 kg/hrExtruders : 50 mm to 150 mmDie (Spiral Mandrel) : 180 mm to 850 mmStreamlined Coextrusion Dies (SCD) : Through BE, CanadaCooling Ring : Eliminator Air RingIBC : 4+1 Pancake IBC / Anti Block IBCAuto Gauge Control System : Auto Gauge Control Systems through Heated Die Lip or Segmented Air RingCage : Roller typeHaul Off : Vertical Oscillating Haul Off / Horizontal Oscillating Haul OffWinder : Surface Winders from 1150 to 3125 mm widthStructure : Prefabricated towerControls : Panel type line controls / Computerized SCADA controlsOthers : We can also offer turnkey solutions including all other automations / auxiliaries / utilities upon request

* Performance depends on various Raw Material combinations and Processing Parameters. The technical data and specifications given are subject to change without prior notice. Refer to your customized offer for scope of supply and other details.

Three LayerBlown Film Plant

Technical Specifications (Non IBC)Line Width (mm) 1150 1450 1750 1950

Maximum Layflat Width (mm) 1100 1400 1700 1900

Extruder Options (mm) 50 / 50 / 50 50 / 65 / 50 65 / 65 / 65 65 / 75 / 65

Die Size (mm) 250 350 400 475

Maximum Output (Kg/hr)* 150 - 180 250 - 280 280 - 310 350 - 380

Plant Dimension (L x W x H - mtrs) 13 x 8.5 x 9.5 14 x 8.5 x 10.3 14 x 9 x 13.5 15 x 10.5 x 15.5


Top Related