Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 1 of 9
TRAINING DRILLING CENTER
INFORMATION NOTICE
In October 2004 Ivano-Frankivsk National Technical University of Oil and Gas
(IFNTUOG) was accredited by International Well Control Forum (IWCF) and got the
ability to certify drilling personnel by Well Control program.
Chief manager of IWCF
Michael Cummins (right on
photo) presented accreditation
certificate to University’s vice-
rector –
Karpash Oleg Mikhailovich
(left on photo)
The necessity of international certification for drilling specialists was
determined by number of accidents. Opening of unknown formations at big depth
increases the risk of loosing hydrostatic control in system “well-formation”, which is
the first reason of kick inflow.
Follow such situation – lack of drilling engineer’s qualification and disability to
take the immediate action in emergency situation can result at open gusher. Thus, it
hearts ecological situation and leaf to financial losses.
The solution of these problems was found at international certification of
drilling companies and personnel in different countries according to well control
course.
Власне, ці обставини і спонукали міжнародні організації за допомогою
сертифікації персоналу бурових компаній вирішувати питання протифонтанної
безпеки під час буріння свердловин у різних країнах світу.
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 2 of 9
To submit these criteria and bring new education services for Ukrainian drilling
personnel it was founded training drilling center in Ivano-Frankivsk National
Technical University of oil and gas.
Training group from public
company “Ukrtransgas”
and “Ukrgasproduction”
are self-studying after
course of lectures in
multimedia room of
training drilling center
At this new University’s department the main position is at full-size training
drilling simulator DRILLSIM 5000, which was created for imitating different
technological operations while well drilling at different conditions and also for drilling
personnel’s knowledge control during gas kick in a well.
Training simulator DRILLSIM 5000 is equipped by all imitating consoles for
creation real drilling rig control room. There are acoustic effects, which are
synchronized with training operations, creates maximum presents of candidate at
drilling rig.
Soft of training simulator gives to the instructor ability to control all actions of
candidates during their practical study and examination. Instructor can change
parameters of practical exercises both at the beginning of training and during the
training. Immediate changes in drilling or well control conditions during well control
operations gives ability to instructor to create stress situation for candidate. It requires
immediate candidate’s reaction of changed situation and gives them opportunity to
evaluate their actions if it was done at real situation.
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 3 of 9
Offshore and onshore
training consol for
DRILLSIM 5000
operating
Central operation console
of DRILLSIM 5000
Our training center has 2nd, 3rd and 4th LEVEL of accreditation. Education
process with candidates has provided by three-stage system: theoretical course,
practical course (training simulator) and examination. When a person successfully
passes its exam (more than 70% for each exam) it gives him opportunity to get IWCF
certificate. IWCF certification is required in most drilling companies all over the
world.
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 4 of 9
Stuff of training drilling center
Kolisnyk Vasyl Ivanovych –
IWCF assessment center manager,
associate professor, Ph.D.,
tel/fax. 00380 (342) 504691,
E-mail: [email protected]
Oleksjuk Nikolaj Petrovich – senior lector,
IWCF assessor
tel/fax. 00380 (3422) 4-21-53,
E-mail: [email protected]
Kostryba Ivan Vasylovych –
associate professor, Ph.D.,
IWCF instructor
tel/fax. +380 (3422) 42353,
E-mail: [email protected]
Kolisnyk Roma Antinivna –
Laboratory chief of training center
tel/fax. +380 (342) 504691,
E-mail: [email protected]
Hrymaniuk Volodymyr –
IWCF instructor
tel/fax. +380 (342) 504691,
E-mail: [email protected]
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 5 of 9
108
67
50
22
35
9
12
46
30
122
59
Results of Ukraininan drilling engineers certification according to
international standarts for the period from 2005 till 2014
Candidates from other countries
Other Ukrainian companies and private persons
Daughter joint-stock company 'Prime Drill'
Equity joint venture «Poltava Petroleumcompany»Departments of «Ukrgasproduction» company
Daughter joint-stock company «Ukrtransgas»
Daughter joint-stock company «Smit Ukraine»and «NewTech Ukraine»»Daughter joint-stock company "Likvo"
Public company «Chornomorneftegas»
Public company «Ukroil»
Daughter joint-stock company «Ukrgasproduction»
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 6 of 9
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 7 of 9
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 8 of 9
Іvano-Frankivsk National Technical University of oil and gas Training Drilling Center, 76019, Ukraine, Ivano-Frankivsk city, Karpatska street, 15
+38 (0342) 50-46-91; +38 (0342) 50-07-50 [email protected], www.nung.edu.ua
Page 9 of 9
Approximate time-table of IWCF courses
in 2015
Level of
certification Start date Examination date
3 – 4 16.02.2015 27.02.2015
2 02.03.2015 06.03.2015
3 – 4 16.03.2015 27.03.2015
2 06..04.2015 10.04.2015
3 – 4 13.04.2015 24.04.2015
2 04.05.2015 08.05.2015
3 – 4 18.05.2015 29.05.2015
2 08.06.2015 12.06.2015
3 – 4 15.06.2015 26.06.2015
2 06.07.2015 10.07.2015
3 – 4 20.07.2014 31.07.2015
2 31.08.2015 04.09.2015
3 – 4 14.09.2015 25.09.2015
2 05.10.2015 0910.2015
3 – 4 12.10.201 23.10.2015
2 02.11.2015 06.11.2015
3 – 4 09.11.2015 20.11.2015
2 30.11.2015 04.12.2015
3 – 4 07.12.2015 18.12.2015