Training Program
AVEVA PLANT
ORINOX, Enhance your Digital Asset
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 2 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
OVERVIEW
ORINOX is a “global” software consulting, Plant Design and Engineering firm specializing in the
digitalization of physical assets using the AVEVA suite of products. We operate across many sectors
including oil & gas, nuclear, energy, chemical, pharmaceutical, and food processing.
AVEVA is the global leader in plant, power and naval engineering solutions. It chose to partner
with Orinox as a Registered AVEVA Global Services Provider. This partnership will allow a bigger unit
with multidiscipline knowledge across many industry sectors such as Plant Design and Engineering
business functions.
We have designed training programs for a wide range of the AVEVA suite software’s and for multiple
designing skills included but not limited to (PDMS, E3D, Diagrams, P&ID, and Engineering). Our
beginner courses provide a foundation for best practices, while our advanced courses are used to
develop proficiency and competency with the corresponding modules (Advanced User,
Administration, and Catalogue).
Our training sessions offer shortcuts and "best practices" for AVEVA IE&D based design and data
management. Manuals and training guides may be adapted for specific customer needs upon
request.
Our expert training instructors have years of experience in plant and piping design, structural, civil
engineering, and mechanical design. They encounter the same challenges as our EPC and Owner-
Operator customers, which gives them a unique perspective to keep all training materials both
current and relevant.
Orinox offers training sessions worldwide, both in-house and at client offices. Current training sessions
have the capacity to train 1 to 6 people simultaneously per session, depending on the ability level of
participants and the requested content. We offer fast response times, so sessions may be held with
very little delay throughout the year.
AVEVA Engineering
AVEVA Diagrams
AVEVA E3D
AVEVA PDMS
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 3 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
TRAINING CENTERS
CHATEAUBRIANT-FRANCE PARIS-FRANCE
LYON-FRANCE KUALA LUMPUR-MALAYSIA
HOUSTON, TX-UNITED STATES
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 4 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
TRAINING APPROACH
Trainees will be immersed in realistic and engaging training exercises that replicate the design process
across multiple sector: Oil & Gas, Nuclear, Energy, Chemical, Environmental, Pharmaceutical, and
Food Processing.
3.1. Resources
Dedicated Workspace available for training sessions. Conference rooms and collaboration areas will
be available for use.
Training supports including manuals and exercises are given to each trainee upon arrival. A
complementary USB Flash Drive key will also be provided; the key contains the training supports in
digital format, as well as some utilities such as "freeware" and macros for use in the AVEVA Software.
3.2. Course content
Different types of interactive courses, exercises and actual cases drawn from different industrial fields.
All work will be supervised; constant monitoring will allow the instructor to verify the correct progression
of each trainee.
3.3. Means of Evaluation
Following the various practical sections and exercises, a course certificate will be given out to each
trainee upon completion of the training sessions.
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 5 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
LOCATIONS AND TIMES
In our offices or on customer site.
Houston, Texas 9900 Westpark Drive, Suit 307, Houston,TX 77063
+1 (346)240-3901
Châteaubriant,France 3 avenue du Bataillon Carmagnole liberté
Bâtiment K1 2eme étage - 69120 VAULX EN VELIN
+33 (0) 6 28 43 70 58
Lyon, France 213, Rue de Gerland Bât B4 69007 LYON
+33 (0) 9 51 30 13 97
Paris, France 9/11 Allée de l'Arche 92671 COURBEVOIE
+33 (0) 1 49 97 15 79
Munich, Germany Landsbergerstrasse 155, 80687 Muenchen Germany
+49 176 24 03 21 34
Calgary, Canada 17th Avenue SW, 4th floor Calgary, Alberta, T2T 0A4, Canada
+1 (587)223-2057
Kuala Lumpur, Malaysia Suite 2201-2203, 22nd Floor Plaza See Hoy Chan
Jalan Raja Chulan
50200 Kuala Lumpur - MALAYSIA
+33 240 072 340
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 6 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
TRAINING PROGRAM
Training program
AVEVA PLANT
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 7 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
MANAGE
AVEVA PDMS USER DESIGN Page 8
AVEVA PDMS USER DRAFT Page 9
AVEVA PDMS ADVANCE USER Page 10
AVEVA E3D USER MODEL Page 11
AVEVA E3D USER DRAW Page 12
AVEVA DIAGRAMS USER Page 13
AVEVA E3D UPGRADE E3D2.1 Page 14
AVEVA SCHEMATIC 3D INTEGRATOR USER Page 15
AVEVA USER MDS Page 16
AVEVA ADMIN PROJECT Page 17
AVEVA ADMIN DRAFT Page 18
AVEVA ADMIN ISODRAFT Page 19
AVEVA ADMIN DIAGRAMS Page 20
AVEVA ADMIN ENGINEERING Page 21
AVEVA ADMIN MDS Page 22
AVEVA CATALOGUE PIPING Page 23
AVEVA ENGINEERING USER Page 24
AVEVA REVIEW Page 25
LANGUAGE PML 1 & 2 Page 26
TRAINING FOR AVEVA TOOLS
ADMIN
USER
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 8 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
5.1.1 AVEVA PDMS USER DESIGN
Training number OF_002
Duration 5 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Intended for All office personnel: Technician / Engineer
Training objective ⬧ Master the overall structure of the software (modules, GUI, hierarchy organization).
⬧ Manipulate the 3D model elements, and understand their functions.
⬧ Master the modules: Equipment, Steelwork, walls and floors, Piping, HVAC, and Cable Tray.
Schedule
Day 1 : Overview of PDMS software and associated tools
Description of the PDMS hierarchy, graphics manipulation, elements positioning and
orientation, measuring distance and angle, attributes, screenshots and then introduction to the
Model Editor.
Day 2 : Equipment application
Modeling primitives and equipment. Representation and obstruction levels. Copying elements
using Datals, Finding and editing elements using lists and Search tools.
Day 3 : Structure (beams & Columns – Panels & Plates – Walls & Floors – Access, Stairs & Ladders)
Steel structure design.
Creating civil engineering elements.
Creating stairs and handrails.
Day 4 : Piping application
Pipeline Design.
Day 5 : HVAC and Cable Tray application
Creating simple HVAC.
Creating simple Cable tray.
Using the Clasher.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer ⬧ The training will be led by one of Orinox’s Experts for AVEVA PDMS
Monitoring and
Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in the
form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at the
end of the training by the trainer.
Contact Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 2500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 9 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA PDMS USER DRAFT
Training number OF_004
Duration 5 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Recommendation 10 days training is recommended. (USER DESIGN + USER DRAFT).
Required Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Completed the training session « AVEVA PDMS- USER DESIGN».
Intended for All office personnel: Technician / Engineer
Training objective ⬧ Understand the functions of the drawing modules and the extraction possibilities.
⬧ Extract data from the 3D model and usage the reporting tool.
Duration and content
Day 1 : Data consistency
Using the Data Consistency tool.
Using attachments and isometric previews.
Day 2 : Isodraft module
Creating Isometric using the Isodraft module.
Day 3 : Reports and Draft introduction
Material lists extractions using Report.
Draft introduction.
Day 4 : Draft module
Creating drawings with orthogonal views, isometric views and section views. Creating
quotations.
Day 5 : Draft module
Creating labels, Auto-tagging, update drawings
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer ⬧ The training will be led by one of Orinox’s Experts for AVEVA PDMS
Monitoring and
Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in the
form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contact Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 2500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 10 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA PDMS ADVANCE USER*
* 2 choices are available: 1 – Advance piping training.
2 – Advance structure and civil engineering training.
Training number OF_003
Duration 3 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4 / AVEVA E3D
Available languages English, French
Required Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Completed the training « AVEVA PDMS - USER DESIGN».
Intended for All office personnel: Technician / Engineer
Training objective Choice 1: Master Pipework module and associated tools: Slope, MTO, Report, Mass and gravity
center, Highlighting, Spooling.
Choice 2: Master Structure and Wall & Floor module: Walls and floors with fittings, Screed, Slope.
Duration and content
Day 1: Mastering slopes and catalog issues (weld, cut elbow...); Report (MTO, Weight).
Day 2: Pipe spooling.
Day 3: Highlighting, Isodraft and Draft.
Day 1: Wall & Floor definition with their different fittings.
Day 2: Creating screed with slopes.
Day 3: Crating Draft and note the different representation issues.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA PDMS
Monitoring and
Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in the
form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at the
end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1500€ (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 11 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA E3D USER MODEL
Training number OF_22
Duration 5 days
Available version AVEVA E3D
Available languages English, French
Recommendation 10 days training is recommended. (USER MODEL + USER DRAW).
Required Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Intended for All office personnel: Technician / Engineer
Training objective
⬧ Master the overall structure of the software (modules, GUI, hierarchy organization).
⬧ Ability to manipulate the 3D model elements, and understand their functions.
⬧ Master the modules: Equipment, Steelwork, walls and floors, Piping, HVAC, and Cable Tray
and Laser Modeler.
Duration and content
Day 1 Overview of E3D software and associated tools
Description of the E3D hierarchy, graphics manipulation, elements positioning and orientation,
measuring a distance and an angle, attributes and pseudo-attributes, screenshot,
introduction to the Model Editor.
Day 2 : Equipment application
Modeling primitives and equipment. Representation and obstruction levels. Copying elements
using Datals. Finding and editing elements using lists and Search tools.
Day 3 : Structures application (beams & Columns – Panels & Plates – Walls & Floors – Access,
Stairs & Ladders)
Designing steel structures. Creating civil engineering elements. Creating stairs and handrails.
Day 4 : Piping application
Designing Pipelines.
Day 5 : HVAC Cable Tray application and Laser Modeler
Creating simple HVAC. Creating simple Cable tray. Using the Clasher.
Importing and using Point cloud.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA E3D
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in the
form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 2500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 12 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA E3D USER DRAW
Training number OF_23
Duration 5 days
Available version AVEVA E3D
Available languages English, French
Recommendation 10 days training is recommended. (USER MODEL + USER DRAW).
Required Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Completed the training « AVEVA E3D- USER MODEL».
Intended for All office personnel: Technician / Engineer
Training objective ⬧ Understand the functioning of the drawing module and the extraction possibilities.
⬧ Extract data from the 3D model and using the reporting tool.
Duration and content
Day 1 : Data consistency
Using the Data Consistency tool.
Using attachments and isometric previews.
Day 2 : Isodraft module
Creating Isometrics using the Isodraft module.
Day 3 : Reports and Draft introduction
Creating material lists using Report.
Draft introduction.
Day 4 : Draft module
Creating drawings (orthogonal views, isometric views and section views). Creating
quotations.
Day 5 : Draft module
Creating Labels, Autotagging, update drawings
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA E3D
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in the
form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 2500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 13 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA DIAGRAMS USER
Training number OF_009
Duration 3 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Intended for All office personnel: Technician / Engineer
Training objective To be able to :
⬧ Create P&ID using Diagrams module.
⬧ Create pipeline list (Report tool).
Duration and content
Day 1 :
Diagrams module overview.
Creating P&ID using a template. Title block modification using attributes.
Drawing format modification.
Creating equipment and pipelines.
Day 2 :
Creating actuator and instrumentation.
Creating P&ID connectors.
Using Area.
Adding P&ID annotations.
Day 3 :
Using Auto Formatting Rules, and self-check Search.
Creating pipeline list.
Modification of pipeline specification.
Replacing symbols.
Copying pipe elements, and entire P&ID.
Schematic Model Viewer.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 14 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA E3D UPGRADE E3D2.1
Training number OF_024
Duration 3 days
Available version AVEVA E3D 2.1
Available languages English, French
Required Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Knowledge of AVEVA PDMS or E3D1.1
Intended for All office personnel: Technician / Engineer
Training objective The goal of this course is to train an advanced PDMS 12.1 or E3D1.1 user to Everything3D 2.1
new features: new graphic user interface, new graphic engine, new 3D modeling process,
new 2D drafting module DRAW.
Duration and content
Day 1 : Overall software presentation, Equipment and Structural applications. Introduction
of the new interface and new designing tools, primitive and equipment modeling, steel
frame modeling.
Day 2 : Piping application & SLH modeler, stairs and handrail creation, piping design, use of
collections.
Day 3 : 2D drafting with DRAW, interface presentation, sheet and view creation ; drawlist
handling, dimension and annotation of the drawings ; revisionning and 2d Drawing exports.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 15 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA SCHEMATIC 3D INTEGRATOR USER
Training number OF_011
Duration 2 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required
Knowledge of plant design.
Knowledge of Microsoft Windows and Office environment.
Knowledge of PDMS software or have completed the training « AVEVA PDMS - USER
DESIGN » and « AVEVA PDMS-USER DRAFT ».
Completed the training «AVEVA-USER DIAGRAMS ».
Intended for All office personnel: Technician / Engineer
Training objective
To be able to:
⬧ Understand the functioning of Schematic 3D integrator.
⬧ Compare P&ID’s.
⬧ Compare and link pipelines and equipment.
⬧ Check data consistency between the 3D models and P&ID’s.
⬧ Build missing pipelines.
⬧ Administration of Schematic 3D Integrator.
Duration and content
Day 1 :
Schematic 3D integrator overview.
Making P&ID’s available for 3D.
Diagrams Viewer functionalities.
Using and setting the Main Table.
Compare 2 P&ID’s.
Using the Link tool.
Day 2 :
Compare and link pipelines and equipment (COMPARE & LINK).
Building missing pipelines and equipment (BUILD and Pipe Router).
Administrating Schematic 3D Integrator.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA SCHEMATIC 3D INTEGRATOR
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1000 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 16 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA USER MDS
Training number OF_019
Duration 2 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required Knowledge of the Microsoft Windows and Office environment.
Knowledge of the plant design and support.
Have completed the training « AVEVA PDMS- USER DESIGN » and « AVEVA PDMS-DRAFT».
Intended for All office personnel: Technician / Engineer
Training objective To be able to :
⬧ Modeling pipe supports, HVAC, and Cable tray.
Duration and content
Day 1 :
MDS overview.
Understanding and using the “MDS Framework”.
Creating supports (hangers, guide, HVAC and Cable Tray supports…).
Day 2 :
Isometrics production.
Creating Reports.
Creating support drawing using Draft module.
Implementing on a plant design.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA MDS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1000 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 17 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA ADMIN PROJECT
Training number OF_006
Duration 2 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required
Knowledge of the plant design.
Knowledge of the Microsoft Windows and Office environment.
Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER
DESIGN » and « AVEVA PDMS-USER DRAFT».
Intended for All office personnel: Technician / Engineer
Training objective ⬧ Install the software and modify the standard configuration files.
⬧ Master the management and operations on databases.
Duration and content
Day 1 : Creating a new project
Installing PDMS and creating a new project by modifying the standard configurations.
Creating Teams and Users.
Creating and managing databases.
Creating and managing Multi Databases.
Day 2 : Common administrative actions on a PDMS project
Deleting ghost users. Identifying a particular session (STAMP). Back in a previous session
(BACKTRACK). Deleting History project (MERGE). Control the database status (DICE).
Database reconfiguration (RECON).
Creating color rules in Design module and managing inter-DBs macro.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA PDMS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1000 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 18 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA ADMIN DRAFT
.
Training number OF_057
Duration 2 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required
Knowledge of the plant design.
Knowledge of the Microsoft Windows and Office environment.
Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER
DESIGN » and « AVEVA PDMS-USER DRAFT». « AVEVA PDMS-ADMIN PROJECT ».
Intended for All office personnel: Technician / Engineer
Training objective ⬧ Allow to configure drawings using the software rules to adapt it to a project.
⬧ Libraries administration: Labels, Styles, Representations and tags rules.
Duration and content
Day 1 :
Defaults setting naming rules, Backing Sheet, 2D symbol, Label Library, Style Library,
Drawlist, Tag Rule
Day 2 :
Autotagging rules, Plotting options, True Font.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA PDMS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1000 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 19 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA ADMIN ISODRAFT
Training number OF_058
Duration 1 day
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required
Knowledge of the plant design.
Knowledge of the Microsoft Windows and Office environment.
Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER
DESIGN » and « AVEVA PDMS-USER DRAFT» and « AVEVA PDMS-ADMIN PROJECT».
Intended for All office personnel: Technician / Engineer
Training objective ⬧ Set the parameters to enable the isometric output.
Duration and content
Day 1 :
Reminding catalogs connections, ISODRAFT Reference Manual, Define a template, 2D
symbol, Backing sheet, UDAs defining for revisions management, Setting in Isodraft
interface then in the text file.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA PDMS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 20 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA ADMIN DIAGRAMS
Training number OF_010
Duration 2 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English
Required
Knowledge of the plant design.
Knowledge of the Microsoft Windows and Office environment.
Knowledge of PDMS software or Have completed the training « AVEVA ADMIN PROJECT ».
Have completed the training «AVEVA-USER DIAGRAMS ».
Intended for All office personnel: Technician / Engineer
Training objective
To be able to :
⬧ Administrate Diagrams project.
⬧ Set Diagrams options.
⬧ Create and modify new symbols.
⬧ Establish Autonamming rules.
⬧ Create and manage Formatting Rules.
Duration and content
Day 1 :
Introduction to Diagrams administration (environment overview and Diagrams databases).
Creating and administrating Diagrams project.
Creating hierarchy.
Creating Shapes and Stencils.
Day 2 :
The options and common functions.
The utilities.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of practical
assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA DIAGRAMS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training in
the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level of
knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned at
the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1000 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 21 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA ADMIN ENGINEERING
Training number OF_013
Duration 3 days
Available version AVEVA PDMS V12.1SP4
Available languages English, French
Required Knowledge of the Microsoft Windows and Office environment.
Have completed the training « AVEVA PDMS-ADMIN PROJECT ».
Have completed the training « AVEVA-ENGINEERING ».
Intended for All office personnel: Technician / Engineer
Training objective
To be able to :
⬧ Create a Tags project.
⬧ Create UDETs and UDAs.
⬧ Use the Distributed attributes.
⬧ Create a Database Views.
⬧ Use and configure the Compare Update function.
⬧ Create the Autonaming rules.
⬧ Configure the Datasheets.
Duration and content
Day 1 :
Tool overview.
Creating a Tags project.
Creating an equipment items and pielines.
Creating a DBVIEWS.
Day 2 :
Creating a Distributes attributes.
Implementation of a Compare Update.
Creating the Autonaming rules.
Configuring a Rule Set.
Workflow implementation.
Day 3 :
Datasheet configuration.
Cleaning the project.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of
practical assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA ENGINEERING
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training
in the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level
of knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned
at the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 22 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA ADMIN MDS
Training number OF_020
Duration 2 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required Knowledge of the Microsoft Windows and Office environment.
Knowledge of the plant design and du supportage.
Have completed the training « AVEVA-USER MDS ».
Intended for All office personnel: Technician / Engineer
Training objective To be able to :
⬧ Create and set a AVEVA MDS environment.
Duration and content
Day 1 :
AVEVA MDS overview and installation.
Catalogue overview and projet creation.
Using the Defaults base and project configuration.
Day 2 :
Creating a primary and secondary support.
Draft administration.
Other administration actions.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of
practical assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA MDS
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training
in the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level
of knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned
at the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1000 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 23 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA CATALOGUE PIPING
Training number OF_005
Duration 3 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required
Knowledge of the plant design.
Knowledge of the Microsoft Windows and Office environment.
Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER
DESIGN » and « AVEVA PDMS-USER DRAFT».
Intended for All office personnel: Technician / Engineer
Training objective ⬧ Know the databases linked to the catalog.
⬧ Create plant design catalog items
⬧ Ensure the validity of a catalog.
Duration and content
Day 1 : Paragon overview and creation of connection tables
Overview and organization of catalog databases.
Creating piping components.
Creating components text and designation.
Creating connection tables.
Day 2 : Specifications and Propcon module
Creating Component Families (GPART).
Creating pipe and tubing specifications.
Creating and manage properties (via Propcon module).
Day 3 : Management bolts
Creating an adjustable valve.
Creating bolting components and bolting tables.
Creating bolting specifications.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of
practical assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA PARAGON
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training
in the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level
of knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned
at the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 1500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 24 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA ENGINEERING USER
Training number OF_012
Duration 1 day
Available version AVEVA PDMS V12.1SP4
Available languages English, French
Required Knowledge of the Microsoft Windows and Office environment.
Have completed the training « AVEVA ADMIN PROJECT»
Intended for All office personnel: Technician / Engineer
Training objective
To be able to :
-Create and edit tags elements.
-Create and manage lists.
-Make Import-Exports using Excel.
-Create and use Datasheets.
Duration and content
Day 1 :
Introduction to the tool.
Creating and managing lists.
Using additional functions of tags.
Creating and managing Datasheets.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of
practical assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA ENGINEERING
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training
in the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level
of knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned
at the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 25 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
AVEVA REVIEW
Training number OF_018
Duration 1 day
Available version AVEVA Review 12
Available languages English, French
Required
Knowledge of the Microsoft Windows and Office environment.
Knowledge of the plant design.
Knowledge of PDMS software or have completed the training « AVEVA PDMS- USER
DESIGN » and « AVEVA PDMS-DRAFT».
Intended for All office personnel: Technician / Engineer
Training objective To be able to :
⬧ Create and prepare a review model using AVEVA Review.
Duration and content
Day 1 :
Export Methods of an AVEVA PDMS model.
Using Review (manipulation, lighting management, textures management, creating
views, creating animations).
PDF 3D export.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of
practical assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for AVEVA REVIEW
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training
in the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level
of knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned
at the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office : 500 € (per person)
On-site : Call for pricing (minimum of 4 trainees)
Auteur : Emmanuel Morvan Date : 11/04/2019
Réf. : Training_Program Page : 26 sur 26
SARL ORINOX Formation – 12 route des Fougerays – 44110 CHATEAUBRIANT – 02 40 07 23 40 – [email protected]
SARL au capital de 10 000 € - RCS NANTES : 503 373 979 – NAF : 7112B – N°TVA Intra communautaire : FR50 503 373 979
LANGUAGE PML 1&2
Training number OF_008
Duration 4 days
Available version AVEVA PDMS V12.0 / AVEVA PDMS V12.1SP2 / AVEVA PDMS V12.1SP4
Available languages English, French
Required
Knowledge of the Microsoft Windows and Office environment.
Knowledge of PDMS software or have completed the training « AVEVA PDMS - USER
DESIGN » and « AVEVA PDMS-USER DRAFT».
Have some knowledge in programming.
Intended for All office personnel: Technician / Engineer
Training objective To be able to :
⬧ Develop macro commands to automate repetitive tasks in PDMS
Duration and content
Day 1 :
Macros overview (simple macros, macros with simple settings, programmable macros).
Variable types (String, Real, Array ...).
The conditions (If, comparator, Match wild…).
Error management.
Using loops.
Using PML1 and PML2.
Day 2 :
Using loops.
Using PML1 and PML2.
Functions, arguments and referrals.
Day 3:
Creating objects.
Creating diff.
Day 4:
Creating dialog boxes (Forms).
Communicate with the Windows environment.
Technical Means
⬧ A multimedia room for the training
⬧ Individual workstation with two screens
⬧ Course material and practical implementation of the software in the form of
practical assignments
Pedagogical Means ⬧ Theory lessons
⬧ Practical exercises
⬧ Real Case Studies
Trainer The training will be led by one of Orinox’s Experts for the PML language
Monitoring and Evaluation
⬧ Regular follow-ups of progress and comprehension will be done during the training
in the form of tests and multiple choice questions.
⬧ A training attestation will be delivered at the end of the training specifying the level
of knowledge acquired by the trainee.
⬧ A daily attendance sheet will be signed by the trainees for half days, countersigned
at the end of the training by the trainer.
Contacts Angélique Haubois Email : [email protected] +33 (0)2 40 07 23 40
Rates Orinox office: 2000 € (per person)
On-site : Call for pricing (minimum of 4 trainees)