SensoTech
LiquiSonic Ultrasonic analyzer for liquids Product description
SensoTech GmbH, Steinfeldstraße 3, D-39179 Magdeburg-Barleben Tel +49 39203 961300, Fax +49 39203 961309, Internet www.SensoTech.com
Measuring principle
The ultrasonic analyzer LiquiSonic 30 determines in-line the sound velocity and the concentration in liquids.
The ultrasonic principle is a continuous, contactless method which is independent of the transparency of the medium and shows a high reliability.
The sound velocity is related to the concentration respectively the density. If the distance between the ultrasonic transmitter and receiver is known, it is possible to measure the sound velocity via the determination of the propagation time and so to conclude the density.
A new signal processing guarantees an extremely high accuracy when measuring the sound velocity. In addition a highly precise temperature measuring, the improved ultrasonic sensor construction and the know-how, acquired during innumerable series of measuring and lots of applications, ensure outermost precise results.
LiquiSonic consists of one or up to four ultrasonic sensors and a controller (evaluation unit).
The ultrasonic sensor contains the virtual ultrasonic measuring. It is realized as a flange (sandwich) or immersion type sensor. The ultrasonic sensor also determines exactly the temperature of the liquid.
The controller is responsible for the concentration calculation and the communication with the user. An TFT-display and a for operator buttons allow a simple system configuration and the adaptation to various applications.
Range of application
• concentration measurement
• density measurement
• monitoring of polymerization, determination of the conversion ratio
• fast phase interface detection
• monitoring and control of crystallization, determination of supersaturation degree and metastable range
• control of neutralization processes of acids and lye’s under higher process temperatures and pressure
• process monitoring
• control of scrubbers, distillations and absorbers
2
SensoTech
Product datasets
• Sound velocity measuring with a high absolute accuracy
• Determination of concentration with accuracies up to 0.05 % by weight
• Measuring is not influenced by conductivity and doesn’t depend on liquid transparency
• Application in open and pressurized tanks and vessels, in pipes or in by-pass lines
• No moving parts and gaskets
• Maintenance free
• Choice of up to 256 product calibration set-ups
• Automatic self validation
• User management
• TFT display with clear structured GUI
• Output of measuring value as current signal 4..20 mA and via RS-232-interface
• Sampling of up 32 properties in to 15,000 data records in the non volatile data memory
• Event logbook with documentation of calibration and system configuration
• Connection of several sensors to one controller possible
Controller with sensor 21003240
SensoTech, product description LiquiSonic 3
General
measuring principle determination of sound velocity in the liquid as dimension for components' concentration
measuring range 100 to 10,000 ms-1
typical accuracy 0.05 ms-1
accuracy of 0.1 °C temperature measurement
communication data exchange with the PLC via current signal 4.. 20 mA, RS-232, fieldbus
sensor connection connection of ultrasonic sensors with controller via BUS-cable
Controller
controller
Variants LiquiSonic 30 is the standard device with all functions. Up to 4 sensors can be connected with one controller. Several functions, like trend presentation or the logbook make this device to an efficient analyzer.
LiquiSonic 20 is the low budget version with only basic functions.
LiquiSonic 40 calculates the concentrations of 3-components liquids. The controller uses the sound velocity and an external signal like the density or the conductivity.
LiquiSonic 50 has features for optimal application in crystallization and polymerization processes.
4
SensoTech
LiquiSonic 20 30 40 50
art.-no. 21001201 21001301 21001401 21001500
number of sensors for one controller 1 4 2 4
3-component-calculation
application program crystallization application program polymerization display color color color color
housing metal metal metal metal
trend chart product datasets 16 256 256 256
product choice internal/ external automatic product choice
editing of product identifiers several operation languages data memory with 15,000 data lines event logbook (error logbook) event presentation user management optional optional optional optional
analogue output of concentration analogue output of temperature digital outputs 4 6 6 6
analogue inputs 1 4 2 1
interface RS232 SonicGraph optional optional optional Interface PROFIBUS, Devicenet optional optional optional optional
SensoTech, product description LiquiSonic 5
Functions
date time
status line
trend view
product calibration
system menu
product selectionconcentrationof the liquid
temperature of the liquid
The main view shows the measuring values. A range exceeding is shown with a special symbol
The trend chart offers helpful information and allows optimal process monitoring.
The controller manages the calibration curves of up to 32 products. It is possible to select the products and calibration curves in a specific menu
6
SensoTech
It is also possible to change the identifier of the product.
The calculation of the concentration can adjusted to achieve optimal process results.
The controller has a lot of parameters and helpful functions. The parameters are structured in a parameter tree.
SensoTech, product description LiquiSonic 7
The device has an automatic self check. All error messages are shown in a message box and the errors are stored into an event-logbook.
The system security is very important. The controller has a comfortable user management. It is possible to define several user with different access right. This user management ensures that only specific users are able to calibrate the device.
8
SensoTech
LiquiSonic 30 has the possibility to store important events into an event logbook. The logbook is readable by the interface and can be presented on the display.
This is a comfortable documentation for the user access and the handling. Who has when calibrate which product.
The values of several sensors are presented in the 2- or 4-sensor view.
LiquiSonic 40 allows the calculation and the display of 2 different concentrations in a 3-component-liquid.
LiquiSonic 50 offers several functions for optimal control of crystallization and polymerization processes. For crystallization application the display shows the supersaturation and the content of crystals.
SensoTech, product description LiquiSonic 9
The sensor option SonicGraph allows the visualization of the original ultrasonic signal. This function is very helpful to optimize the measuring conditions.
The controller allows the operation in several languages.
10
SensoTech
Common data Function Description
Display TFT 320 x 240 pixels
Operating touch keyboard, 4 keys
analogue outputs 4..20 mAmp, isolated LiquiSonic 30 / 40 / 50 4 x free programmable LiquiSonic 20 1 x Concentration, 1 x Temperature
digital outputs 6 electronic relays, 24 V 1 x „alarm “ 1 x „medium missing “ LiquiSonic 30 / 40 / 50 6 x free programmable LiquiSonic 20 4 x free programmable
analogue input 4..20 mA, isolated LiquiSonic 30 / 50 4 x for compensation LiquiSonic 20 1 x for compensation LiquiSonic 40 2 x additional physical value
product choice manual external parallel (only LiquiSonic 30) external (fieldbus, serial interface) automatic (only LiquiSonic 30)
interface RS-232 optional fieldbus PROFIBUS DP, MODBUS, DEVICENET
housing panel housing, sector: 243 (w) x 123 (h) mm mounting depth: 160 mm material: aluminium, stainless steel degree of protection: front IP 65 weight: approx. 3.5 kg
power supply 110 - 230 VAC ±10%, 50, 60 Hz optional 24 VDC
power consumption 35 W
range of ambienttemperature
0 to 40 °C
maximum cable length 1000 m
Contact Cage clamp
SensoTech, product description LiquiSonic 11
SensoTech
280
138
14516
controller sizes
Controller Art-No.
Controller 20 21001201
Controller 30 21001301
Controller 40 21001401
Controller 50 21001501
12
SensoTech
Ultrasonic sensors
Specification Function Description
range of medium temperature
-5 to 120 °C optional to 200 °C
range of ambient temperature
-10 to 40 °C
degree of protection IP 65
supply 24 VDC ±20% (from controller)
power input 6 W
material Stainless steel 1.4571 [ ANSI 316 (Ti)] optional Hastelloy, Monel, Inconel, tantalium and titanium, PFA
Pressure Standard: PN16, optional: PN40, PN64, PN100, PN250, PN300
Types Typ Art-No. Flange Sensor-∅ Flange-∅ Imm.length
Immersion sensor40-14 DIN50 21003210 flange DN 50 DIN 2527 40 165 92, 150, 250, 500, 1000, 2000
Immersion sensor 40-40 Varivent 65 21003221 Tuchenhagen Varivent 40 84 61
Immersion sensor 40-40 APV 65 21003222 APV- flange 40 100 61
Immersion sensor 40-14 Tri-Clamp 50
21003263 Tri-clamp flange DIN 32676 40 64 61
Immersion sensor 40-40 Twin 50 21003252 flange DN 50 DIN 2527 40 165 150
Immersion sensor Ex 50 EEx de IIC T4-T6
21003240 flange DN 50 DIN 2527 40 165 92, 150, 250, 500, 1000, 2000
Immersion sensor 40-14 GF 50 21003262 thread G 2 ¼“ 40 65 112
Immersion sensor 40-14 without flange
21003261 without flange 40 - 260
Immersion sensor 40-14 reactor without flange
21003231 without flange with connector ∅ 25mm IP68
40 - 500
Immersion sensor 24-24 21003286 24 - 150
Immersion sensor 24-24 Ingold-thread
21003287 Ingold thread 25 24 - 150
Immersion sensor 24-24 TriClamp 21003288 TriClamp 25 24 50 55
Immersion sensor 40-40 Pharma 21003290 TriClamp 50 40 64 92
Typ art-no. DN inside ∅
outside ∅
pitch circle ∅
pitch ∅ high length
A B C D E Flange sensor 80 PFA 21002282 80 72 140 160 18 205 45
SensoTech, product description LiquiSonic 13
Immersion sensor 40-40 DIN50 L240 (21003260)
Standard sensor for applications in pipes or vessels.
Ø 1
22
165
488
238
Ø 14
16
Ø 40
68
240
Ø165
DIN-Flansch DN50
40
Lochkreis Ø125
Immersion sensor 40-14 GF 50 (21003262)
Ø 1
22
165
354
238
118
16
Ø 40
165Ø 14
68
G 2 "1 4
14
SensoTech
Immersion sensor 40-40 VARIVENT 50 (21003220)
Sensor for application in food and beverage industry.
Immersion sensor Ex 50 (21003240) imm. length 92 mm
Ø 1
22
165
300
238
92
16
Ø 40
Ø165
40
Lochkreis Ø125DIN-Flansch DN50
Standard sensor for applications in pipes or vessels in hazardous areas.
SensoTech, product description LiquiSonic 15
Immersion sensor 40-14 without flange (21003231) with connector box
Immersion sensor 24-24 TriClamp (21003288)
Ø 24
55
Sensor with small diameter for application in vessels with small aperture.
16
SensoTech
Immersion sensor 40-40 Pharma (21003290)
Sensor with electro-polished finish for application in the pharmaceutical industry.
Immersion sensor 40-40 Twin (21003252)
Flange sensor 80 PFA (21002282)
Corrosion resistant sensor for applications in pipes.
SensoTech, product description LiquiSonic 17
Installation recommendations The installation of the sensors is easy and requires no specific attention. No specific inlet and outlet designs as well as specific process fittings are required. For detailed information please ask for general installation recommendations (http://www.sensotech.de/download/LSM109_01.pdf).
For higher ambient temperatures the sensor can be adapted with a remote electronic enclosure or with a separate heat exchanger from our standard accessories .
Wiring The connection between sensor and controller supplies the sensor and realizes the data exchange (digital bus). The cable consists of the power supply cables and a twisted pair for the bus.
The required dimension depends on the number of connected sensors and the overall cable length:
cable-length [m]
1 sensor 2 sensors 4 sensors
100 2 x 0,25 mm2 2 x 0,50 mm2 2 x 0,75 mm2
200 2 x 0,50 mm2 2 x 0,75 mm2 2 x 1,50 mm2
400 2 x 0,75 mm2 2 x 1,00 mm2 2 x 2,50 mm2
The bus should specified according the requirements of a RS485. The following design is recommended:
2 x (2 x 0,25 mm2 Cu twisted) shielded
Changing lengths of the cable during installation e.g. by cutting is not critical. .
18
SensoTech
Connection setup to sensor controller
One sensor with one Controller
Controller
2
7
6
5
4
Sensor 1
Termination resistor
PE
10 VDC
C_SCH
C_GND
C_L
C_H
24 VDC
C_GND
C_H
C_L
24 VDC
0 VDC
C_SCH
27
25
26
30
29
28
Several sensors with one controller The connection for several sensors is shown as follows:
Controller
22
77
66
55
44
Sensor 1Sensor 2 PEPE
11
27
25
26
30
29
28
Connection structure
Sensor 1 Sensor 2 Sensor 3 Sensor 4
CAN-Bus max. 1000 m
Line connection
SensoTech, product description LiquiSonic 19
Communication software
A software package is offered which enables the configuration and communication with the LiquiSonic-analyzers from a personal computer.
SonicWork The software SonicWork is a PC based software with following functions:
• down loading of product product datasets
• reading of logbook data
• on-line reading with a PC and trend chart
• device configuration
The program works with Windows 98 2000 and Windows NT, XP
SonicWork, reading of measuring values SonicWork, trend chart
SonicWork allows the remote control of the LiquiSonic analyzer by intranet, internet or modem connection.
A free of charge version of SonicWork LE may be downloaded under www.SensoTech.com
20
SensoTech
Further information SensoTech GmbH Steinfeldstraße 3 D 39179 Magdeburg-Barleben
Phone +49 39203 961300 Fax +49 39203 961309 E-Mail [email protected] Internet: www.SensoTech.com
Licenses, trademarks and improvements
SensoTech, LiquiSonic, LiquiDens and SonicWork are trademarks of the SensoTech GmbH. All licenses and trademarks are property of their respective owners.
SensoTech reserves the right to make improvements in the products described in this paper at any time without prior notice. Further, SensoTech reserves the right to revise this paper and to make changes in its content without obligation to notify any person or organization of such revision or change.
10/2006 LSM002_01_31.doc
FuelCon: http://www.FuelCon.com FuelCon http://www.FuelCon.de FuelWork http://www.FuelWork.de Evaluator-C http://www.Evaluator-C.de Teststand http://www.Teststand.de http://Brennstoffzellen-Pruefstand http://www.Brennstoffzellen-Pruefstand.de SensoTech http://www.SensoTech.com SensoTech http://www.SensoTech.de SonicWork http://www.SonicWork.de LiquiSonic http://www.LiquiSonic.de LiquiTurb http://www.liquiturb.de Oxylyt http://www.oxylyt.de absorb absorption acid additive addition analysis analyze analyzer analyzes armature attenuate base basically bath beam beverage bio biochemie biochemical biotechnology brix bx chemie calibrate calibration chemise chemical color colour component concentrate concentration concentration concentration-measurement conductometer conductivity conduct container content coriolis corrode corrosion current crystal crystallize crystallizer degree density densitymeter density-meter densitymeasurement device devicenet dispersion distribution dosage drink dry dry-substance electrolyte emulsion evaporate evaporator extract extraction fermentation ferment fitting flow fluid food gamma gas gas-washer in index inline in-line inorganic inorganically install installation instrument ion lab labor laboratory liquid liqui liquid-analyze layer liquidens line liquiSonic liquiturb mamps m% m/s mass massflow measure measurement measuring measuring-device measuring-instrument measuring-procedure medium melt metastabil metastable metastabile method meter metrically microwave milliohm millisiemens medium monitor monitoring monomer neutralize neutralization NIR ohm on online on-line optic optical organic organically paar particle paste pH pH-value pharmacy pharma-chemie pharmaceutical pharmaceutics phase phase-detection phase-separation physica physic physically pipe plant ppb ppm polymerization polymer pressure sensor profibus process process-analyze procedure process-analyzer process-measurement pure quality radiation radiometry radio ratio reaction reaction-monitoring refract refraction-index refractometer rheology rheometer salt sample sample-analyze saturation seed sensor sensoric separate separation share siemens sound sound-velocity sonic sonic-velocity soft solid solidcontent solidconcentration solutable solution soluble sonicgraf sonicgraph sonicwork sono sonotrode sonochemie sound spectral spectrum suck substance super supersaturation tank technical temperature transmitter turbidity trace tube ultrasonic ultrasound UV valve velocity VIS viscosimeter viscosity volume vol% w% wash washer waste 4..20 4 to 20 %
SensoTech, product description LiquiSonic 21