r Quality Equipment & Systems Since 1978

FILTER PRESSES l Manual or automatic hydraulic closure . Center feed four corner discharge l Air blowdown manifold standard

e-

l Gasketed polypropylene plates/cloths l Expandable by design

t

t ,. l Sandblasted two part epoxy steel frames l Free air hammer cloth replacement tool

LJ

INCLINED PLATE CLARIFIERS l 60” inclined plate design with easily removable plate packs l l/4” plate steel sandblasted to SSPC

and coated for superior corrosion protection l Flash mix/flocculation compartment

with mixer standard l Automatic sludge blow down system standard l Conservative .2 GPM/sq. ft. projected plate area

design l Large cone sludge thickening area standard l Exceptionally well suited for low clearance

requirements l Standard sizes to 360 GPM l Custom designs for higher flows

TREATMENT SYSTEMS l Skid mounted design to 60 GPM, fast delivery

and low cost installation l Extremely space efficient -

requires less than 200 sq. ft. l Custom systems for higher flows l Detailed engineering CAD drawings l Installation services available l Full laboratory capability for treatability testing

and routine analysis l System upgrades to existing systems

Water and Wastewater Equipment Co. Division of Phil-Mar Equipment Co.

1466 E. 357th Street l Eastlake, Ohio 44095 Phone: 440-942-7070 l Fax: 440-942-3622

Circle 067 on reader information card

output over thousands of hours, low radiated infrared, which can damage sensitive substrates, and selectable spectral outputs for process optimization. Three dif- ferent 6-in. UV lamp systems ranging from 1.8 to 2.8 kW (300- 470 W/in.) are available. Circle 407 on the reader service card

UV INSPECTION LAMP

Paul N. Gardner Co. Inc. Pompano Beach, Fla.

Gardner’s Ultrawand AP-800 Ul- tra-Slim UV Inspection Lamp re- veals cracks, defects, and flaws con- ventional lamps can’t reach. The lamp measures 30 in. by 1 in. The l-lb probe is ergonomically de- signed to be held comfortably dur- ing lengthy inspections. The 8-W

lamp finds critical indications that other UV light sources may miss and illuminates previously inacces- sible areas without disassembly. Circle 408 on the reader service card

FILM LININGS

Edlon-PSI, a unit of Robbins & Myers Inc. Charleston, W.V.

Edlon-PSI offers custom virgin Te- flon film linings for metal and fiber- glass vessels including columns, pressure vessels, storage tanks, and pipe and pipe fittings. Engi- neered for use in a wide range of severe chemical service applica- tions, the custom linings are man- ufactured using an exclusive fu- sion-welding process that results in a smooth, nonstick surface finish. The linings come in thickness range from 0.060 to 0.250 in. Circle 409 on the reader service card

VIBRATORY EGUIPMENT

Vibra Finish Ltd. Mississauga, Ont.

New vibratory equipment by Vibra Finish offers lower, user friendly, load and unload heights. The new

68 Metal Finishing

integral drive features easy main- tenance and lower energy usage. Circle 410 on the reader service card

PRGCESS CHILLERS

GCI Industrial Refrigeration Wilmington, Del.

A new series of low-temperature chillers provide fluids at tempera- tures as low as -50°F for heat re- moval from test equipment, molds, electronics, jacketed vessels, envi- ronmental chambers, and other equipment and processes in indus- trial and scientific applications. GCI offers 32 standard models as well as custom machines for haz- ardous atmospheres and unique applications. Models are available in both air-conditioning and water- condensing configurations for final heat rejection. Circle 411 on the reader service card

DIAPHRAGM PUMPS

Wilden Pump & Engineering Co. Grand Terrace, Catif:

The P.050 UltraPurePTFE pump is engineered to take the cleanliness of diaphragm pumps to a new level. Machined Teflon PTFE wet- ted materials, engineered plastic composite fasteners, integral pis- ton diaphragm, and unique seal- ing techniques enable the P.050 to transfer corrosive liquids with low contamination and high purity. The pump is engineered to with- stand high-temperature duty cy- cling up to 120°C (250°F). Circle 412 on the reader service card

PosiTedor @6000 FN

and Substrate Selection.. . Ferrous or Non-Ferrous.

H Basic, Standard (Statistics) or Memory Models Available

H Simple Two-Button Operation on All Models

H Solvent, Acid, Oil, Water and Dust Resistant

n Ideal for Painters, Powder Coaters, Platers,

Galvanizers, Anodizers... and More

Toll Free I-800-448-3835

802 Proctor Ave. l P.O. Box 676 l Ogdensburg, NY 13669 U.S.A.

C 0 R P 0 R AT IO N Tel (315) 393-4450 l Fax (315) 393-8471 l Web http://www.defelsko.com

Circle 013 on reader information card

%OON Custom Plate Metal Fabrication:

Carbon Steel l Stainless Steel l Specialty Alloys

Tanks l Process Vessels l Ductwork l Chutes l Stacks Miscellaneous Weldments

Corrosion Resistant Linings: Rubber l PVC l Fiberglass l Polypropylene l Plasite

Heresite l and many others

Engineered to meet your Pickling, Plating, Anodizing, Chemical Storage and Containment Requirements

On Site Field Repair

11 “Reliable -key Service” 1 Moon Fabmatmg Corporation

700 West Morgan Street l Kokomo, IN 46903 Tel. (765) 459-4194 l FAX (765) 452-6090

Circle 037 on reader information card

August 1999 69