Warranty & SupportThis product is provided with a one year warranty for problems found during normal usage. Mistreating the Tuff-Cam 2 or opening the unit will invalidate this warranty. Any data stored on the unit and any consequential loss is not covered by this warranty. The battery is not user replaceable.
Technical SupportPlease visit www.tts-group.co.uk for the latest product information.
Email [email protected] for technical support.
TTS Group Ltd.Park Lane Business ParkKirkby-in-AshfieldNottinghamshire, NG17 9GU, UK.Freephone: 0800 318686 Freefax: 0800 137525
TTS Product Code: SC00551
WARNING: Do not dispose of this product in household waste. Hand it over to a collection point for recycling electronic appliances.
WARNING! Not suitable for children under 36 months due to small parts – choking hazard. Made in China, on behalf of the TTS Group Ltd.
Electricity Kit
NxxxxxN448
TTS is proud to be part of plc
A superb kit for both KS1 and KS2 science enquiry. All component bases are manufactured from a transparent resin, so children can clearly see the wiring, all connections and thus the electrical path.
Important InformationPlease read all instructions carefully before using and retain for future reference.Do not allow your Electricity Kit to come into contact with water or other liquids.
Contents of KitYour Electricity Kit includes the following:
n 2 x 3V lamps
n 1 x Red crocodile lead
n 1 x 3V Buzzer
n 5 x Red 20cm 4mm leads
n 1 x Black crocodile lead
n Job Sheet Exercises
Although not included in the Electricity Kit, the TTS PowerPods are a perfect companion. Several of the Job Sheet Exercises include the use of these PowerPods, however these can be substituted for an alternative battery pack with 4mm connectors deemed suitable by the user.
n 1 x LED
n 1 x Push to make switch
n 1 x 3.6V Motor
n 1 x Plastic storage case
n 5 x Black 20cm 4mm leads
Electricity KitThe Electricity Kit contains everything needed to explore how electrical circuits are connected. The components are mounted using a transparent cover so students can see easily how each item works. All connections are made using high quality 4mm leads. All components are safely stored in a rugged storage case.
The Electricity Kit is a perfect companion to the TTS PowerPods (SC00550)
Rechargeable PowerPods are a safer alternative to using normal 1.5V batteries. A traditional “C” or “D” type cell can generate very large currents if accidentally shorted. This can cause large amounts of heat to be generated posing a potential risk to children. PowerPods automatically limit the output current to a safe value. The PowerPods turn on automatically whenever a 4mm plug is connected into the PowerPod negative terminal. The power remaining is clearly displayed and an overload indicator lights to show when a misconnection or short circuit has occurred.
Component Specification
3V, 0.1A
3V d.c., 30mA @ 3V, 2300Hz, continuous
3.6V d.c., 270mA (no load), 13000rpm (no load), rotation CCW
Single colour LED
Male, 4mm jacks at each end, L20cm
Male, 4mm jack at one end, L20cm
Bulb
Buzzer
Motor
LED
Leads
Leads – crocodile
Component Specifications
Electricity KitCheck Sheet
Before you can begin your jobs you must make sure that all the electrical equipment on this card is in your Electrician’s Kit box.
If anything is missing please tell you teacher.
When you have finished your jobs, check all equipment is back in the Kit.
If anything is missing please tell you teacher.
12 wires2 bulbs and holders
1 motor 1 LED
1 switch
1 buzzer
4 PowerPods
Job Sheet 2What happens if there are lots of bulbs in a curcuit?
Use these to make lots of bulbs light at the same time
Certificate StatementI know what happens when i put lots of bulbs in a curcuit with
only one PowerPod.
Signed:
Date:
2 bulbs
Wires
PowerPodBulb holder
Job Sheet 3Making Motors Work
Certificate StatementI can make a curcuit that the motor works.
Signed:
Date:
Motor
PowerPod
Wires
Job Sheet 4Buzzers
Use these to make a Buzzer in a circuit.
Certificate StatementI can make a circuit so that a buzzer works.
Signed:
Date:
Buzzer
PowerPod
Wires
Job Sheet 5Conductors and Insulators
This circuit has a gap in it.
Materials that will let electricity pass through them are called conductors
Materials that will not let eletricity pass through them are called insulators
Check which materials can be used in the gap to light the bulb. Which materials are conductors and which ones are insulators. Make two groups and tell
someone about them.
Certificate StatementI know which materials can be used in the gap in a
curcuit to make a bulb light.
Signed:
Date:
Wood Plastic
String
Metal Paper Card
Wool
Cork Chalk
Job Sheet 6Making your own switch.
Here is a photograph of a switch.
Use it in a circuit to make a light go on and off.
Certificate StatementI can make my own switch and use it in a circuit so that a light works.
Signed:
Date:
Job Sheet 7How do torches work
n Take a torch apart
n Find out how the torch works
n What are the different parts for?
n Draw a picture or take a photograph of the different parts and label them, then write a caption to say what they do.
Certificate StatementI know what the different parts of a torch are and how a torch works.
Signed:
Date:
Job Sheet 8Designing and making torches.
Design and make your own torch.
Certificate StatementI can design and make a torch that works.
Signed:
Date:
Job Sheet 9Making dim and bright lights.
n Make a circuit with two bulbs that are dim that can be switched on and off.
n Make a circuit with two bulbs that are dim that can be switched on and off.
Certificate StatementI can make a circuit with two bulbs that are dim that can be switched on and
off.
I can make a circuit with two bulbs that are dim that can be switched on and off.
Signed:
Date:
Job Sheet 10How the length of the wire affects the brightness of the bulbs.
n Make the circuit in the photograph.
n Find out what happens when you put pieces of wire of different lengths in the circuit.
Certificate StatementI know what happens when you put pieces of wire of different lengths in the
circuit.
Signed:
Date:
Job Sheet 11Why do these circuits not work?
Make each one of these circuits.
Tell someone why they do, or do not work.
Certificate StatementI can tell someone why a circuit does not work.
Signed:
Date:
Job Sheet 12Safety Switch.
When someone uses an electric drill or lawn mower, it can be very dangerous if they are not used properly. People should use safety switches that only let the device work when someone is holding or pressing the switch. When they stop holding or pressing the switch the device stops and so they are less likely to
have an accident.
Use the things in the photograph to make a safety switch.
Signed:
Date:
PowerPod
FoilPeg
Glue
Wire
Motor
Sissors
Certificate StatementI can design and make my own safety switch and use it in a circuit so when I let go of the
switch the motor stops.
Job Sheet 13Burglar Alarm.
Mr and Mrs Webb need a burglar alarm. They would like one they could put under their front door so that if anyone trod on it, the alarm would go off!
Make Mr and Mrs Webb a burglar alarm.
If you show someone that it works you will get the ‘Apprentice Electrician Preventing Crime Certificate’.
Certificate StatementI can design and make my own burglar alarm.
Signed:
Date:
PowerPod
Foil
Sissors
Wire
Buzzer
Glue
Card
Sponge
Job Sheet 14Circuit Diagram Symbols.
You will need to memorise these circuit diagram symbols.
Think of different ways that you can remember them.
When you think you can draw them and what they mean, let someone test you.
If you remember all of the symbols your friend can sign your certificate.
Certificate StatementI can draw the circuit symbol for:
Signed:
Date:
Wire
Switch closed
Buzzer
Motor
Battery
Switch open
Bell
Job Sheet 15Make these circuits and draw the circuit diagram for them.
Circuit with two bulbs, power pod, wires
Circuit with one bulb, power pod, switch (closed showing bulb on) and wires.
Circuit with one bulb, power pod, switch (open showing bulb off) and wires.
Circuit with motor, power pod, switch - on, wires.
Certificate StatementI know what happens when i put lots of bulbs in a curcuit with only one Power
Pod
Signed:
Date:
I can draw a circuit diagram for a:
Circuit with two bulbs, power pod, wires
Circuit with one bulb, power pod, switch (closed showing bulb on) and wires.
Circuit with one bulb, power pod, switch (open showing bulb off) and wires.
Circuit with motor, power pod, switch - on, wires.
Job Sheet 16Electrical Safety.
Make a poster or a leaflet to teach children how to be safe around electricity.
Certificate StatementI have made a poster or a leaflet to teach children how to be safe around
electricity.
Signed:
Date:
Job Sheet 17Instructing Others.
Make a set of instructions to tell someone how to make a circuit with a bulb, PowerPod, wires and a switch.
You could; Write , draw or use photographs to make the instuctions.
Certificate StatementI have made a set of instructions to tell someone how to make a circuit with a
bulb, PowerPod, wires and a switch.
Signed:
Date:
Job Sheet 18Lighting up and Making things move.
Create a picture which uses a circuit to make something light up and move.
Certificate StatementI have made a picture which uses a circuit to make something light up and move.
Signed:
Date:
Job Sheet 19The Villagers Well.
Create an alarm for a well to let the villagers know when the well was running dry.
Certificate StatementI have made an alarm for a well to let the
villagers know when the well was running dry.
Signed:
Date:
Job Sheet 20Reed Switches.
Find out how a reed switch works.
Now use the reed switch in a buggy car so that the headlights go on and off.
Certificate StatementI have used the reed switch in a buggy car so that the reed switches the
car headlights on and off.
Signed:
Date: