Configure the Wireshark 3G FP Static Table

Appling New Configuration

• All the FP static table configurations are available on the Wireshark Protocol:

• In the wireshark Software go to Edit Menu->Preferences –> Protocols->FP

• In the FP if you click on Common Transport Channle Config Table ( Edit Button) then all the applied list are available.

• For applying new configuration go to the following path: c:\Document and Settings\User\Application Date\Wireshark

If you see there is two files 1-Common_FP_Static_Table (text format file)This is new config we have 2-Common_FP_Static_Table (only for wireshark use)Open the 1st file and 2nd file using notepad

1-Common_FP_Static_Table (text format file) New Configuration

2-Common_FP_Static_Table (only for wireshark use)

• Copy the contents of 1st file to the 2nd file and then save the all changes on 2nd file

Now the new configurations is applied and open the wireshark software and go to the following path•Edit Menu->Preferences –> Protocols->FP•In the FP if you click on Common Transport Channle Config Table ( Edit Button)