![Page 1: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/1.jpg)
© Copyright 2012 Xilinx
ML605 Board & FMC XM104 Connectivity Card IBERT Design: SMA & SATA Interfaces
March 2012
XTP091
![Page 2: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/2.jpg)
© Copyright 2012 Xilinx, Inc. All Rights Reserved. XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of their respective owners. NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied. Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.
Revision History
Date Version Description 03/16/12 13.4 Recompiled under 13.4.
10/26/11 13.3 Recompiled under 13.3.
07/06/11 13.2 Recompiled under 13.2.
03/01/11 13.1 Recompiled under 13.1.
12/21/10 12.4 Recompiled under 12.4.
10/05/10 12.3 Recompiled under 12.3.
07/23/10 12.2 Recompiled under 12.2.
![Page 3: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/3.jpg)
ML605 IBERT Overview
Xilinx ML605 & FMC XM104 Boards – Xilinx Virtex-6 FPGA Connectivity Kit
Software Requirements ML605 & FMC XM104: IBERT Setup ML605 & FMC XM104: Running the IBERT Design ML605 & FMC XM104 IBERT Design Creation
– Create IBERT CORE Generator Project – Create IBERT Design – FMC SMA/SATA
ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT ACE Files References
Note: This presentation applies to the ML605 and XM104 Boards
![Page 4: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/4.jpg)
ML605 IBERT Overview
Description – The LogiCORE Integrated Bit Error Ratio (IBERT) core is used to create a
pattern generation and verification design to exercise the Virtex-6 GTX transceivers. A graphical user interface is provided through the IBERT console window of the ChipScope Pro Analyzer
Reference Design IP – LogiCORE IBERT Example Designs
• FMC_HPC (4 Transceivers)
– ChipScope Pro Analyzer • ChipScope Pro Software and Cores User Guide (UG029)
Note: Presentation applies to the ML605 and XM104 Boards
![Page 5: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/5.jpg)
Xilinx Virtex-6 FPGA Connectivity Kit
FMC XM104 Board
ML605 Board
Note: Presentation applies to the ML605 and XM104 Boards
![Page 6: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/6.jpg)
ISE Software Requirements
Xilinx ISE 13.4 software
Note: Presentation applies to the ML605 and XM104 Boards
![Page 7: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/7.jpg)
ChipScope Pro Software Requirement
Xilinx ChipScope Pro 13.4 software
Note: Presentation applies to the ML605 and XM104 Boards
![Page 8: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/8.jpg)
ML605 & FMC XM104: IBERT Setup
![Page 9: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/9.jpg)
ML605 & FMC XM104: IBERT Setup
Unzip ug664.zip file to your C:\ drive – Available through http://www.xilinx.com/v6connkit
Note: Presentation applies to the ML605 and XM104 Boards
![Page 10: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/10.jpg)
ML605 & FMC XM104: IBERT Setup
SATA Loopback Cable – Included in Connectivity Kit
Note: Presentation applies to the ML605 and XM104 Boards
![Page 11: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/11.jpg)
ML605 & FMC XM104: IBERT Setup
SMA Cables – Included in Connectivity Kit – 4 cables used with IBERT
Note: Presentation applies to the ML605 and XM104 Boards
![Page 12: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/12.jpg)
ML605 & FMC XM104: IBERT Setup
The Virtex-6 Connectivity Kit includes the attached FMC XM104 Board
![Page 13: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/13.jpg)
ML605 & FMC XM104: IBERT Setup
Connect J4 and J10 with an SMA Cable
Note: Presentation applies to the ML605 and XM104 Boards
![Page 14: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/14.jpg)
ML605 & FMC XM104: IBERT Setup
Connect J6 and J8 with an SMA Cable
Note: Presentation applies to the ML605 and XM104 Boards
![Page 15: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/15.jpg)
ML605 & FMC XM104: IBERT Setup
Connect J3 and J9 with an SMA Cable
Note: Presentation applies to the ML605 and XM104 Boards
![Page 16: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/16.jpg)
ML605 & FMC XM104: IBERT Setup
Connect J5 and J7 with an SMA cable
Connect J11 and J12 with the provided SATA loopback cable
![Page 17: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/17.jpg)
ML605 & FMC XM104: IBERT Setup
Set S2 to 0101XX (X = Don’t care, 1 = on, Position 6 → Position 1) – This selects JTAG
Set S1 to 0XXX (Position 4 → Position 1) – This disables JTAG configuration from the Compact Flash
Note: Presentation applies to the ML605 and XM104 Boards
![Page 18: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/18.jpg)
ML605 & FMC XM104: IBERT Setup
Connect a USB Type-A to Mini-B cable to the USB JTAG connector on the ML605 board – Connect this cable to your PC – Power on the ML605 Board
Note: Presentation applies to the ML605 and XM104 Boards
![Page 19: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/19.jpg)
ML605 & FMC XM104: Running the IBERT Design
![Page 20: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/20.jpg)
ML605 & FMC XM104: Running the IBERT Design
Open ChipScope Pro and click on the Open Cable Button (1) Click OK (2)
1
2
Note: Presentation applies to the ML605 and XM104 Boards
![Page 21: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/21.jpg)
ML605 & FMC XM104: Running the IBERT Design
Select Device → DEV:1 MyDevice1 (XC6VLX240T) → Configure… Select <Design Path>\ready_for_download\ml605_fmc_xm104_ibert.bit
Note: Presentation applies to the ML605 and XM104 Boards
![Page 22: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/22.jpg)
ML605 & FMC XM104: Running the IBERT Design
Select File → Open Project… Select <Design Path>\ready_for_download\ml605_fmc_xm104_ibert.cpj
Note: Presentation applies to the ML605 and XM104 Boards
![Page 23: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/23.jpg)
ML605 & FMC XM104: Running the IBERT Design
Click Yes on this Dialog
Note: Presentation applies to the ML605 and XM104 Boards
![Page 24: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/24.jpg)
ML605 & FMC XM104: Running the IBERT Design
The line rate is 3.125 Gbps for all four GTXs (1)
1
Note: GTX0_113, GTX1_113 = SATA; GTX2_113, GTX3_113 = SMA
![Page 25: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/25.jpg)
ML605 & FMC XM104: Running the IBERT Design
TX Diff Output Swing = 590 mV TX Pre-Emphasis = 0.15 dB; TX Post-Emphasis = 0.18 dB
Note: Presentation applies to the ML605 and XM104 Boards
![Page 26: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/26.jpg)
ML605 & FMC XM104: Running the IBERT Design
TX/RX Data Patterns are set to PRBS 7-bit and 15-bit (1) Click BERT Reset buttons (2)
1
2
Note: Presentation applies to the ML605 and XM104 Boards
![Page 27: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/27.jpg)
ML605 & FMC XM104: Running the IBERT Design
View the RX Bit Error Count (1) Different GTX Transceivers used as TX & RX partners
Note: Presentation applies to the ML605 and XM104 Boards
2
![Page 28: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/28.jpg)
ML605 & FMC XM104: IBERT Project Creation
![Page 29: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/29.jpg)
Create IBERT CORE Generator Project
Open the CORE Generator Start → All Programs → Xilinx ISE Design Suite 13.4 → ISE Design Tools → Tools → CORE Generator
Create a new project; select File → New Project
Note: Presentation applies to the ML605 and XM104 Boards
![Page 30: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/30.jpg)
Create IBERT CORE Generator Project
Create a project directory: ml605_fmc_xm104_ibert
Note: Presentation applies to the ML605 and XM104 Boards
![Page 31: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/31.jpg)
Create IBERT CORE Generator Project
Name the project: ml605_fmc_xm104_ibert.cgp
Note: Presentation applies to the ML605 and XM104 Boards
![Page 32: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/32.jpg)
Create IBERT CORE Generator Project
Select Part Under the Project
options, set the Part (as seen here): – Family: Virtex6 – Device: xc6vlx240t – Package: ff1156 – Speed Grade: -1
Select Generation
Note: Presentation applies to the ML605 and XM104 Boards
![Page 33: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/33.jpg)
Create IBERT CORE Generator Project
Set the Design Entry to Verilog
Click OK
Note: Presentation applies to the ML605 and XM104 Boards
![Page 34: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/34.jpg)
ML605 & FMC XM104: IBERT Design Creation
![Page 35: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/35.jpg)
ML605 & FMC XM104: IBERT Design Creation
Right click on the IBERT Virtex6 GTX (ChipScope Pro - IBERT, Version 2.06a – Select Customize
Note: Presentation applies to the ML605 and XM104 Boards
![Page 36: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/36.jpg)
Make the following settings: – Component name:
ml605_fmc_xm104_ibert Under the System Clock,
select the following settings: – Use External Clock
source – Frequency: 200 – Location: J9 – Standard: LVDS 25
Click Next
Create IBERT Design
![Page 37: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/37.jpg)
Make the following settings – Select All GTs – Max Line rate: 3.125
Gbps – The Refclk Frequency:
156.25 MHz – GTX count: 8
Click Next
Create IBERT Design
![Page 38: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/38.jpg)
Set the following GTX locations to the Custom 1 / 3.125 Gbps Protocol: – QUAD_112 (for
Clocking) – QUAD_113
Click Next
Create IBERT Design
![Page 39: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/39.jpg)
Connect all GTXs to: – MGTREFCLK0 112 – This connects Bank 113 to
the Bank 112 156.25 MHz GTX Ref Clock
– GTX Ref Clock comes in from the XM104 board on Bank 112 signal FMC_HPC_GBTCLK1_M2C
Click Next
Create IBERT Design
![Page 40: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/40.jpg)
Click Generate
Create IBERT Design
![Page 41: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/41.jpg)
ML605 & FMC XM104: IBERT Design Creation
After the IBERT core finishes generating, click Close on the Readme File window
Note: Presentation applies to the ML605 and XM104 Boards
![Page 42: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/42.jpg)
ML605 & FMC XM104: Generate IBERT ACE Files
![Page 43: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/43.jpg)
ML605 & FMC XM104: Generate IBERT ACE File
Type these commands in an ISE Design Suite Command Prompt: cd C:\ml605_fmc_xm104_ibert\ready_for_download make_ace.bat
Note: Presentation applies to the ML605 and XM104 Boards
![Page 44: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/44.jpg)
ML605 & FMC XM104: Using the IBERT ACE File
Use a CompactFlash reader to mount the ML605 CompactFlash as a disk drive
Copy the file, <Design Path>\ready_for_download\ ml605_fmc_xm104_ibert.ace to <CF Drive>\XILINX\cfg6
Note: Presentation applies to the ML605 and XM104 Boards
![Page 45: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/45.jpg)
ML605 & FMC XM104: Using IBERT ACE Files
![Page 46: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/46.jpg)
ML605 & FMC XM104: Using IBERT ACE Files
Set S2 to 0101XX (X = Don’t care, 1 = on, Position 6 → Position 1) – This selects JTAG
Set S1 to 1110 (Position 4 → Position 1) – This enables JTAG configuration from the Compact Flash, slot 6 – The ML605 CompactFlash has an ML605 FMC XM104 IBERT ACE file
Note: Presentation applies to the ML605 and XM104 Boards
![Page 47: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/47.jpg)
ML605 & FMC XM104: Using IBERT ACE Files
Insert CompactFlash into the ML605 and cycle board power Start the ChipScope Pro Analyzer and open the
ml605_fmc_xm104_ibert.cpj project
Note: Presentation applies to the ML605 and XM104 Boards
![Page 48: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/48.jpg)
References
![Page 49: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/49.jpg)
References
ChipScope Pro – ChipScope Pro Software and Cores User Guide
http://www.xilinx.com/support/documentation/sw_manuals/ xilinx13_4/chipscope_pro_sw_cores_ug029.pdf
![Page 50: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/50.jpg)
Documentation
![Page 51: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/51.jpg)
Documentation
Virtex-6 – Virtex-6 FPGA Family
http://www.xilinx.com/products/silicon-devices/fpga/virtex-6/index.htm
FMC XM104 Documentation – FMC XM104 Connectivity Card
http://www.xilinx.com/products/boards-and-kits/HW-FMC-XM104-G.htm – FMC XM104 Connectivity Card User Guide
http://www.xilinx.com/support/documentation/boards_and_kits/ug536.pdf
![Page 52: XTP091 - ML605 Board & FMC XM104 Connectivity Card IBERT ... · – Create IBERT Design – FMC SMA/SATA ML605 & FMC XM104: Using IBERT ACE Files ML605 & FMC XM104: Generate IBERT](https://reader033.vdocuments.net/reader033/viewer/2022053017/5f1cd2dce4e08d6801761af4/html5/thumbnails/52.jpg)
Documentation
ML605 Documentation – Virtex-6 FPGA ML605 Evaluation Kit
http://www.xilinx.com/products/silicon-devices/fpga/virtex-6/index.htm – ML605 Getting Started Guide
http://www.xilinx.com/support/documentation/boards_and_kits/ug533.pdf – ML605 Hardware User Guide
http://www.xilinx.com/support/documentation/boards_and_kits/ug534.pdf – ML605 Reference Design User Guide
http://www.xilinx.com/support/documentation/boards_and_kits/ug535.pdf