January 2017

Dr. Behbood Ben Zoghi, PhD, P.E. Victor H. Thompson Professor of Electronic Systems

TEES Assistant Agency Director for Corporate Relations

Director, RFID/Sensor Laboratory

Editor-in-Chief of the International Journal of Automated Identification

Technology (IJAIT)

Accomplished university professor and administrator with considerable

experience leading and managing in the academic setting for over twenty ei years. Background in real world engineering experiences in high-tech indus

Dynamic, entrepreneurial, visionary. Developed competitive new programs

partnerships. Strong leader, strategic thinker and effective team builder.

CITIZENSHIP: United States of America EXPERT WITNESS: RFID System Design, Sensors, Emotional Intelligence Leadership Development EDUCATION:

Ph.D. Bioengineering/Electrical Engineering, Texas A&M University, December 1993

Dissertation: “A Novel Optically-Based Approach to Intracranial

Pressure Measurement”

M.S. Electrical Engineering, The Ohio State University, Ohio, June 1986

B.S. Electrical Engineering, Seattle University, Washington, June 1982 P.E. Registered Professional Engineer, Certificate #73652, State of Texas, 1992

Certificate Developing Leadership through Emotional Intelligence, Case Western Reserve University, 2002-2004 Certificate Multi-Health System (MHS) Emotional Quotient (EQ-i) Certified Instructor, 2012

PROFESSIONAL EXPERIENCE:

Educational

April 2015 – August 2016 TEES Assistant Agency Director for the Office of Corporate Relations

March 1999 – Present Full Professor (Tenured)

September 2016-Present Director, Master of Engineering Technical Management (METM)

September 2009 – Present Victor H. Thompson Endowed Chair Professorship Holder

June 2008 – 2013 Director of RFID Oil & Gas Solution group Consortium,

http://rfid.tamu.edu

August 2005 – 2008 Director of RFID/Sensor Lab

January 2001 – March 2005 Program Coordinator of Industrial Distribution,

Director of Thomas and Joan Read Center,

Leonard and Valerie Bruce Leadership Chair

September 2001 – March 2003 Program Director of the Master in Distribution

January 2001 – January 2002 Victor H. Thompson Endowed Professorship

April 1999 – October 2000 Texas A&M University, College Station, Texas

Associate Department Head

August 1996 – August 2001 Semiconductor Systems Laboratory, Texas A&M University

January 2017

Director September 1993 – August 1999 Texas A&M University, College Station, Texas

Associate Professor (Tenured) August 1987 – August 1993 Texas A&M University, College Station, Texas

Assistant Professor January 1987 – August 1987 Franklin University, Columbus, Ohio

Adjunct Professor September 1986 – June 1987 Columbus Technical Institute, Columbus, Ohio

Instructor September 1986 – June 1987 The Ohio State University, Columbus, Ohio

Lecturer September 1984 – June 1986 The Ohio State University, Columbus, Ohio

Teaching Assistant Industrial May 2009 – August 2009 South Texas Nuclear Project, Bay City, TX

Industry Faculty Fellow June1999 – August 1999 Applied Materials, Etch Division, Santa Clara, CA

Industry Faculty Fellow June1997 – September 1997 Applied Materials, New Product Division, Santa Clara, CA

Industry Faculty Fellow June1996 – September 1996 Applied Materials, Manufacturing Division, Santa Clara, CA

Industry Faculty Fellow January 1991 – August 1991 Canberra on the Los Alamos Project

Design Engineer June 1988 – August 1988 Texas Transportation Institute, College Station, Texas

Design Engineer October 1982 – January 1984 ElectroScience Laboratory, Columbus, Ohio

Research Associate BOOKS:

1. Zoghi, B., “Engineering Leadership,” ISBN 0-13-081530-6, DiggyPOD, November 2012.

2. Zhan, W., McDermott, M., Zoghi, B., and Hasan, M., “Modeling, simulation, and analysis for

battery electric vehicles,” Machine Learning and Systems Engineering, S.-I. Ao et al. (eds.),

Lecture Notes in Electrical Engineering, Vol. 68, Springer, 2010, pp. 227-241. (Book Chapter)

3. Zoghi, B. and et al., “RFID Applications and Cases,” published by ICFAI Publishing Company,

ISBN #81-314-0418-8, December 2006.

4. Octavio Carranza, Zoghi, B., et al., “Logística: Mejores Prácticas en Latinoamérica", Publisher

Thomson Custom Publishing, ( #970-686-411-3), spring 2005.

5. Zoghi, B., Jennings, D. “Fundamentals of Distribution Profitability”, Thomson Custom

Publishing, ( ISBN 0-759-3323-1) 2005.

6. Zoghi, B., Kim, S., “Global Distribution- A Study of Distribution in Mexico”, Thomson Custom

Publishing, (Book: ISBN 0-759-34640-2) 2005.

7. Kane-Sellers, L., Koerber-Walker, J., Zoghi, B., “Book: Connecting Resources: A Primer for

Electronics Distribution”, Thomson Custom Publishing, (ISBN 0-759-33249-5), Thomson

Custom Publishing, 2004.

8. Lyster, T., Zoghi, B., “System Automation Concepts & Applications,” Thomson Custom

Publishing, (ISBN 0-759-3323-1) 2003.

January 2017

9. Ishfaq, R., Zoghi, B., “Industrial Electricity,” Thomson Custom Publishing, (ISBN 0-759-3408-9)

2003.

RESEARCH:

1. Led the Texas A&M engineering team on recruiting industry events/membership (Aerospace,

Electronics, Automotive, and Energy sectors) to join the newest and fourteenth member of the

nation's network of Manufacturing USA Institutes sponsored by the U.S. Department of Defense

(DoD) - the Advanced Robotics Manufacturing (ARM) Institute. This coalition will be a $250M

public-private investment intent on creating and deploying robotic technology.

https://www.defense.gov/News/News-Releases/News-Release-View/Article/1049127/dodannounces-

award-of-new-advanced-robotics-manufacturing-arm-innovation-hub-i , Spring 2016present

2. Completion Rental, Inc., “RFID Inventory Management Systems for Oil & Gas equipment

Optimization,” Principal Investigator: Zoghi, B., January 2013- 2014. Amount requested

$10,000.00

3. National Science Foundation, “RFID Tracking and Tracing Disaster Victims using,” Principal

Investigator: R. Murphy, CO-PI:, Zoghi, B., Minson, Matthew, Brown, Susanne, August 2013-

August 2015. Amount requested $600,000.00 (Not funded)

4. National Instrument/Texas Instrument, “Smart Badge,” Principal Investigator: Zoghi, B., January

2013 – December 2013. (Support capstone project) Amount funded $5,000.00

5. Tier One Program (TOP) Grant, “Engineering Leadership Institute: Engineering Emotional

Intelligence,” Co-PIs: Zoghi, B., Nafukho, F., Cerami, J., August 2012-December 2013 -

Amount requested $318,460.75 (Not funded)

6. AiRISTA and Texas Task Force 1,”High value and mission critical asset tracking using RFID

(WiFi) technology,” Principal Investigator: Zoghi, B., August 2012-December 2012 - Proposal

$308, 321.00 (Equipment Value) (Phase I - Funded)

7. Motorola, “Golden-i Augmented Reality for construction application,” Principal Investigator:

Zoghi, B., September 2011 – August 2012. Amount funded $10,000.00

8. United Stated Air Force Nuclear Weapons Center, “Nuclear Components monitoring and

Tracking using RFID/Wireless Technologies,” Principal Investigator: Shipcom Wireless, CO-PI:

Zoghi, B., Ayala, J., (TEES-TCAT) February 2011 – August 2011. Amount requested

$350,000.00 (Not funded)

9. National Science Foundation Engineering Research Center, Principal Investigator: R. Murphy,

CO-PI: Langari, R., et al, Zoghi, B., August 2010- August 2015. Amount requested

$18,500,000.00 (Not funded)

10. Creation of a Modular Curriculum in Digital Instrumentation and Control Targeted at the Nuclear

Power Generation Industry, Principal Investigator: W. Zhan, CO-PI: Zoghi, B., Porter, J.,

Morgan, J., Peddicord, K.L, Poston, J., June 2010- June 2011. Amount requested $131,115 (Not

Funded)

11. BP, “RFID Enterprise Software Evaluation,” Principal Investigator: B. Zoghi, January 2010–

August 2010. Amount funded $10,000

12. Design and Implementation of a Real-Time RFID-Based Inventory Management System for N-

Line Traffic Maintenance, N-Line Maintenance, Principal Investigator: B. Zoghi, CO-PI: G.

Gaukler, January 2009 – December 2009. Amount funded $37,145 13. RFID testing for radiation/contamination/extreme temperature and security- A three phase

projects proposal submitted to South Texas Project, Principal Investigator: B. Zoghi, August 2008

– September 2009 Amount requested $125, 000 (Not Funded))

January 2017

14. RFID for real-time tracking of modular precast, Tindall Corporation, Principal Investigator: G.

Gaukler, CO-PI: B. Zoghi, September 2008 – March 2009, Amount requested $79,020 (not

Funded)

15. RFID Cookbook for the Capital Projects Industry, FIATECH, Principal Investigator: B. Zoghi,

CO-

PI: G. Gaukler, August 2008 – September 2009 Amount requested $114,660 (Not Funded)

16. Creation of a Modular Curriculum in Digital Instrumentation and Control Targeted at the Nuclear

Power Generation Industry, Principal Investigator: W. Zhan, CO-PI: Zoghi, B., Porter, J.,

Morgan, J., Peddicord, K.L, Poston, J., June 2009-2010. Amount requested 147,807.00 (Not

Funded)

17. Automating the test system for the WL Breaker Production Line, Siemens Energy & Automation,

Inc., Principal Investigator: B. Zoghi, January 2008 – December 2008. Amount funded $27,680.

18. Streamlining Integrated Circuit Design Process: Verification and Testing, Integrated Device

Technology, Principal Investigator: B. Zoghi, CO-PI: J. Porter, September 2007 to October 2009.

Amount funded $276,000.

19. RFID Solution Improves Real-Time Inventory Management and Lowers Costs, North American

Precast Concrete, San Antonio, Texas, Principal Investigator: B. Zoghi, January 2007, Amount

requested $125,000.

20. Radio Frequency Identification (RFID) for Real-Time Inventory and Maintenance Applications,

Association of American Railroads Affiliated Laboratory for Railway Research, Principal

Investigator: B. Zoghi, January 2007 – December 2007. Amount Funded $25,000.

21. Design of a Radio Frequency Software Driver, EIS Systems, Principal Investigator: B. Zoghi,

January 2007 – August 2007. Amount Funded $20,000.

22. Design of a RFID system Solution for Automated Theft Detection, Hartford Public Library,

Principal Investigator: B. Zoghi, December 2006– May 2007. Amount Funded $15,000.

23. Integrated Circuit (IC) design and verification processes, Integrated Device Technology, Principal

Investigator: B. Zoghi, CO-PI: Y.K., Jung, August 2006-September 2007. Amount Funded

$150,000.

24. Design, Analysis and Testing for the Production RFID-GPS smart Locking System for Cargo

Security, Innerloc Systems, Principal Investigator: B. Zoghi, September 2006-December 2006,

Amount Funded $3,000.

25. Warehouse Optimization Using Complementary Operational Methods, House of Forgings,

Principal Investigator: S. Thompson, Co-Pi, B. Zoghi. December 2005 – August 2006. Amount

Funded: $12,000.

26. Photondynamics Inc: “Improvement Methods Via Quality System Solutions”, Co-Principal

Investigators: Thompson, S., Zoghi, B., May 2005 – August 2006, Amount Funded: $63,000.

27. Elk, Corporation: “Outsourcing of Manufacturing Management for ELK Corporation”,

CoPrincipal Investigators: Thompson, S., Zoghi, B., February 2005 – December 2005, Amount

funded: $58,000.

28. Hisco-Motorola: Survival in the Second Automotive Century: Developing Collaborative Value

Chain Practices with Strategic Supplier Partners, Co-Principal Investigators: M. Pappu, S.

Thompson, B. Zoghi, May 2005-May 2006, Amount funded: $10,000

29. National Wholesales-Distributors: Services … a Strategic Weapon for Wholesale Distribution,

Strategic Business and Pricing Models for services: Principal Investigator: B. Zoghi, Co-

Principal Investigators: Barry Lawrence and B. Reynolds, 2004-2005, Amount funded: $33,000

30. Shelter: Continuous Improvement in Effectiveness/Efficiency for Shelter Distribution- Lafayette

Wood-Works: Principal Investigator: B. Zoghi, Co-Principal Investigator: B. Reynolds,

20042005, Amount funded: $31,174

January 2017

31. An Information Consortium to Study Supply Chain Integration. IBM, Prelude Systems Inc.,

Rexel, Siemens Energy & Automation, and other firms’ sponsors. Principal Investigator: F. Barry

Lawrence, Ben Zoghi Co-Principal Investigators: Daniel Jennings, 2000-2005, Amount funded:

$495,000

32. “Network Optimization Project”, Wilson Supply, sponsor, F. Barry Lawrence, Principal

Investigator, Ben Zoghi, Brian Reynolds, Co-Principal Investigators. Amount funded: $95,035,

2004

33. “Market Feasibility Analysis and Optimal Distribution Channel Strategy of Energy Metering

Systems in the Mexico”, Equipment Controls Company, sponsor, F. Barry Lawrence, Principle

Investigator, Ben Zoghi and Madhav Pappu, Co-Principle Investigators, Amount

funded:$68,639, 2003.

34. “Software Evaluation for Industrial Distribution Channels: Channel Needs and Functionality

Analysis”, Salient Corporation, sponsor, F. Barry Lawrence, Principal Investigator, Ben Zoghi,

co-Principal Investigator, Amount funded:$24,529, 2003.

35. “Inventory Optimization Project”, Webb Distributors, sponsor, F. Barry Lawrence, Principle

Investigator, Ben Zoghi, Brian Reynolds and Madhav Pappu Co-Principle Investigators, 2003,

Amount funded:$88,235.

36. “A Warehouse Layout Project”, The Maurice Pincoffs Company, sponsor. F. Barry Lawrence,

Principle Investigator, Ben Zoghi and Brian Reynolds Co-Principle investigators, 2003, Amount

funded:$18,745.

37. McNaughton and McKay: A Logistics Project. Sponsored by McNaughton and McKay, Principal

Investigator: B. Lawrence, Co-Principal Investigators: B. Zoghi, D. Jennings and B. Reynolds,

2002-2003, Amount funded: $77,187

38. “The Texas A&M Advanced Wireless Telecommunications Initiative”, Sponsored by TITF,

College Station, Texas. Co-Principal Investigators: C. Georghiades, S. Miller, K. Narayanan, E.

Sepedin, X. Wang, Z. Xiong, B. Zoghi, 2001-2004, Amount funded: $700,000.

39. “Design and Development of an Internet-Based Real-Time Monitoring Device”, Sponsored by

Computer House, College Station, Texas. Principal Investigator: B. Zoghi. Spring 2001. Amount

funded: $2,000.

40. “Design of a software package that simulates an ARC”, Sponsored by Advanced Energy,

Boulder, Colorado. Principal Investigator: B. Zoghi. September 200 – May 2001. Amount

funded: $8,600.

41. “Design of DMX512 Controlled Servo Positioning System”, Sponsored by Laser Spectacles, Inc.,

San Marcos, Texas. Principal Investigator: B. Zoghi. Summer 2000. Amount funded: $3,000.

42. “Design of a Rocker Door Slot Vale”, Sponsored by Lam Research, Austin, Texas. Principal

Investigator: B. Zoghi. Fall 2000. Amount funded: $5,000.

43. “Voice Over Network using CDPD”, Sponsored by Lockard & White, Woodland, Texas.

Principal Investigator: B. Zoghi. Fall 2000. Amount funded: $3,000.

44. “Design of a Pulse Width Modulated Pressure Transducer System”, Sponsored by Control

Systems International, Dallas, Texas. Principal Investigator: B. Zoghi. Spring 2000. Amount

funded: $4,600.

45. “Development of an Intelligent Universal Communication System Interface with the AE High

Voltage Power Supply,” Sponsored by Advanced Energy, Boulder, Colorado. Principal

Investigator: B. Zoghi. Spring 1999. Amount funded: $5,000.

46. “Design of a Database Software Application”, Sponsored by Underhill & Associates, Tulsa,

Oklahoma. Principal Investigator: B. Zoghi. Spring 1999. Amount funded: $5,000.

January 2017

47. “Design of Security Card Reader Format Converter”, Sponsored by Control Systems

International, Dallas, Texas. Principal Investigator: B. Zoghi. Spring 1999. Amount funded:

$5,000.

48. Development of an Intelligent DeviceNet Network Monitoring Device. Sponsored by: Applied

Materials, Austin, TX. Principal Investigator: B. Zoghi. Spring 1997. Amount funded: $20,000.

49. Development of a DeviceNet-based Interface for Dynamic Wafer Exchange, Control and Monitor

of a RF and a Light Tower. Sponsored by: Applied Materials, Santa Clara, CA. Principal

50. Investigator: B. Zoghi. Fall 1996. Amount funded: $100,000.

51. Development of a DeviceNet-based intelligent real-time control and communication system.

Sponsored by: Applied Materials, Santa Clara, CA. Principal Investigator: B. Zoghi, CoPrincipal

Investigator: G. Wright. Fall 1996. Amount funded: $133,840.

52. Automation of a Data-Based Product. Sponsored by: Applied Materials, Santa Clara, CA.

Principal Investigator: B. Zoghi., Fall 1996. Amount funded: $5,000.

53. VHP Dual Blade Robot Control System. Sponsored by: Applied Materials, Santa Clara, CA.

Principal Investigator: B. Zoghi. Spring 1996. Amount funded: $5,000.

54. Design of a Data-Based Query System for New Product. Sponsored by Applied Materials, Santa

Clara, CA. Principal Investigator: B. Zoghi, Fall 1996. Amount funded: $5,000.

55. Design of an Encoder Feedback System for VHP Dual Blade Robot. Sponsored by Applied

Materials, Santa Clara, CA. Principal Investigator: B. Zoghi, Fall 1995. Amount funded: $5,000.

56. Automation of Physical Vapor Deposition Chamber Bake-out Process. Sponsored by Applied

Materials, Austin, TX. Principal Investigator: B. Zoghi, Fall 1995. Amount funded: $5,000.

57. PC-Based Visible Light Computed Tomography Scanner. Sponsored by: R.P. Kincheloe

Company, Dallas, Texas. Principal Investigator: B. Zoghi. September – December 1992. Amount

funded: $2,200.

58. Medical Imaging Technology Course Development. Sponsored by: R.P. Kincheloe Company,

Dallas, Texas. Principal Investigator: B. Zoghi. September – December 1992. Amount funded:

$20,000.

59. Network-Based Continuous Air Monitor System. Sponsored by: Los Alamos National

Laboratory, Los Alamos, New Mexico. Principal Investigator: A. B. Grubbs, Co-Principal

Investigators: G. Wright and B. Zoghi. Two graduate students supported. March 1991 – August

1991. Amount funded: $67,128.

60. A Multichannel Analyzer for Continuous Air Monitoring. Sponsored by: Los Alamos National

Laboratory, Los Alamos, New Mexico. Principal Investigator: A. B. Grubbs, Co - Principal

Investigators: S. Majdi, G. Wright, B. Zoghi. Seven graduate students supported. May 1990 –

December 1990. Amount funded: $174,552.

61. Packaging of a Telemetric Unit for ICP Measurements. Sponsored by: National Science

Foundation, Texas Engineering Experiment Station, TATU. Principal Investigator: Melissa

Guess, Co-Principal Investigator: B. Zoghi. Summer 1992. Amount funded: $2,500.

62. Hardware and Software Design of a Director for Optical Fiber Intracranial Pressure Sensor

System. National Science Foundation, Texas Engineering Experiment Station, TATU. Principal

Investigator: Dianne R. Balcerak, Co-Principal Investigator: B. Zoghi. Summer 1990. Amount

funded: $2,000.

63. PC-Based Visible Light Computed Tomography Scanner. Sponsored by: the Center for Teaching

Excellence, TAMU, College Station, TX. Principal Investigator: B. Zoghi. Summer1992.

Amount funded: $1,000.

64. Fiber Optic Pressure Sensor for Medical Applications. Sponsored by: Office of University

Research, TAMU, College Station, TX. Principal Investigator: B. Zoghi. Spring 1990. Amount

funded: $965.

January 2017

65. Design of a Scientific Experiment to Evaluate Traffic Sensors. Sponsored by: Texas

Transportation Institute, TAMU, College Station, TX. . Principal Investigator: B. Zoghi. Summer

1988. Amount funded: $4,500.

Educational Development

1. Building Energy Management Imitative, Sponsor by: Schneider Electric, Principal Investigator:

Ben Zoghi Summer 2015 – December 2015, Amount funded: $26,000.00

2. Engineering Leadership Initiative, Sponsor by: Hisco Principal Investigator: Ben Zoghi Fall 2006,

Amount funded: $5,000.00

3. Supply Chain Information Systems Laboratory: Connecting the Supply Chain,” software license,

and training $80,290 one-time and $251,070 annually (5 Years) in upgrades, service, and support

(total: $1,335,640). Sponsor by: Siemens Energy and Automation. Principal Investigator: F.

Barry Lawrence, Ben Zoghi Co-Principal Investigators: Daniel Jennings, 2001-2005, Amount

funded: $1,335,640.00

4. Industrial Communication and Control: DeviceNet and Enhancement to Control Laboratory.

Sponsored by: Rockwell Automation. Principal Investigator: B. Zoghi. Fall 1999. Amount

funded: $125,000.00

5. Development of a Semiconductor Manufacturing Engineering Technology Emphasis. Sponsored

by: Applied Materials. Principal Investigator: B. Zoghi. Fall 1997-2001. Amount funded:

$314,525.0

6. Matching the Developmental Process for a Vacuum Technology Laboratory. Sponsored by: MKS

Instruments. Principal Investigator: B. Zoghi, Fall 1997. Amount funded: $70,000.00

7. Development of a Design of Experiment and Statistical Process Control (OE/SPC), Vacuum

technology Lab. Sponsored by: Applied Materials, Santa Clara, CA. Principal Investigator: B.

Zoghi. Fall 1997. Amount funded: $40,000.00

8. Development of a Semiconductor Process Technology Program. Sponsored by: Applied

Materials, Santa Clara, CA. Principal Investigator: B. Zoghi. Fall 1996. Amount funded:

$20,000.00

Research & Development Show Case: A Research and Development competitive proposal was submitted in June 2012 to the office of Offshore Technology Research Center for consideration into the 2013 conference. Three major research projects were accepted for demo and display at the 2013 Offshore Technology Conference (OTC) R&D showcases, May 6-8, Houston, Texas.

1. Real-Time Location System (RTLS) for Personnel Study and Security 2. RFID-Based Pipeline Preventive Maintenance System 3. Technology Innovation: Exploring the Future of Hands-Free Field Service Mobility

White Papers: 1. White Paper: An Introduction To Successful Deployment of Radio Frequency Identification in the

Petroleum Industry, Konrad Konarski, Sam Falsafi, Ben Zoghi, Fall 2008.

2. A Business Case for RFID in the Oil & Gas Industry, Konrad Konarski, Sam Falsafi, Ben Zoghi,

Fall 2008.

3. White Paper: Radio Frequency Identification In Maintenance, Repair and Operation of Flange

Based Pressurized Systems, Sam Falsafi, Konrad Konarski, Ben Zoghi, Spring 2009.

January 2017

4. White Paper: Implementing Wireless & RFID Technology in the Oil Field - A cost saving

decision in times of economic downturn, Konrad Konarski, Sam Falsafi, Ben Zoghi, Paul

Younan, Spring 2009.

Press Release: 1. Oil & Gas RFID Solution Group Consortium Brings Next Generation Wireless Technology to the

Petroleum Industry, 2009.

2. Petroleum Industry turns to Texas for Radio Frequency Identification (RFID), Houston, Texas,

2008.

JOURNAL PUBLICATIONS:

1. Hong, Y., Kannan, P., Harding, B., Chen, H., Rahmani, S., Zoghi, B., Mannan, S.,

“Development of Passive Radio Frequency Identification (RFID) Based Sensor for External

Corrosion Detection.” The International Journal of Engineering Research & Innovation

(IJERI), J16-S-02, p.5

2. Chi, T., Zoghi, B., “PHY/MAC Experimentation for Wireless Multicore Network-on-Chip

Architectures,” Submitted to International Journal of Automatic Identification, Fall 2015.

3. Chi, T., Zoghi, B., “RFID and IEEE 802.11b/Bluetooth Coexistence Using the Interference

Avoidance Scheme,” International Journal of Automatic Identification, (2013 Fall - Accepted

for publication).

4. Zoghi, B., Wagner, D., Akram, F., Li, J., “Smart Checkpost: A Novel Integrated Standalone

Automated RFID/Sensor Solution,” International Journal of Automatic Identification,

JulyDecember 2012.

5. Smith, A., King, R., Zoghi, B., Arnett, C., “Golden-I RFID Ware-House project,”

International Journal of Modern Engineering, Spring 2012. (Accepted)

6. Zhan, W., McDermott,M., Zoghi, B., Hasan, M., “Requirement Development for Electrical

Vehicles Using Simulation Tools,” World Congress on Engineering and Computer Science,

San Francisco, October 20-22, 2009.

7. Zoghi, B., “RFID Throughout the Oil & Gas Supply Chain,” LOG.Middle East's January 2009.

8. Zoghi, B., “Mixing RFID and oil creates competitive advantage,” Oil&Gas Journal, Volume

106.27, July, 2008.

9. Gupta, M., Zoghi, B., “Future Space Application for RFID and Robots,” RFID Journal, March

2008.

10. Kim, HS, Lawrence, B., Zoghi, B., Clark. N, “The role of reverse Logistics Information System

for Returns Handling Process in an Electronics Distribution Environment,” Review of the

Electronic and Industrial Distribution Industries, Vol. 5, No. 2, 2007.

11. Zoghi, B., Singhal, R., Jung, Y., Fink, R., “RFID Solutions: Parking Optimization and Customer

Satisfaction,” International Journal of Modern Engineering, Vol 7, No. 1, Fall 2006.

12. Ishfag, R., Zoghi, B., “Paradigm Shift in Wholesale Distribution-A Management Perspective”

submitted to International Journal of Operations and Production Management, June 2006.

13. Stone, C., Garcia, R., Lujan, A., Zoghi, B., Singhal, R. “RFID Solutions: The Custom Specialty

Garment industry”, RFID Journal, January 2006.

14. Hornback, G., Babu, A., Martin, B., Zoghi, B., Singhal, R., “Automatic Attendance System”,

RFID Journal, January 2006.

January 2017

15. Raman, B., Zoghi, B., “Strategy-based Intelligent Tutoring System: Intelligent Advisor,” ITHET

2003, 4th International Conference on Information Technology Based, in collaboration with IEEE

Education Society, 7-9 July 2003, Marrakech, Morocco.

16. Lawrence F. Barry, Thompson, S., Zoghi, B., Nagarathnam, B., “Agility to Market: Variable

Resource Management for the Electronics Industry,” Review of the Electronic and Industrial

Distribution Industries, Vol. 2, No. 1, Pg. 45-54, 2003.

17. Lyster, T., Zoghi, B., “New Technical Laboratory Curriculum Initiatives Part One: Functional

Framework of a Paperless System,” ASEE Annual Conference, 2003.

18. Bolton, B., Zoghi, B., “Enhancing System Dynamics Instruction for Technologists With

Simulation,” ASEE Annual Conference, 2003.

19. Lawrence, B., Zoghi, B., Krishnamurthi R., “Value Of The Distributor In The Evolving Supply

Chain,” Review of the Electronic and Industrial Distribution Industries, Vol. 1, No. 1, Pg. 1-23,

2002. 20. Porter J.R., Morgan, J., Zoghi, B., “Integrating Project Management in to the Capstone

Senior Design Course,” 2002 American Society for Engineering Education Annual Conference,

Montreal, Canada, June 16-19, 2002.

21. Fletcher, B.L., Kemp, J.A., Warren, M.R., Porter, J.R., Zoghi, B., “A Low-Cost Embedded

Control

Tester for Teaching Mixed Signal Test Concepts,” American Society for Engineering

Education/Gulf Southwest Annual Conference, College Station, March 29-31, 2001.

22. Honea, S., Konneing, G., Laudermilk, N., Mooring, B., Zoghi, B., “Slot Valve ‘Rocker Door’

Controller using Microcontroller and Lonworks Technology,” American Society for Engineering

Education/Gulf Southwest Annual Conference, College Station, March 29-31, 2001.

23. Celis, J, Gould J., Vaughn, K., Fink, R., Zoghi, B., “Characterization of a Coherent

Undersampling Digitizer," American Society for Engineering Education/Gulf Southwest Annual

Conference, College Station, March 29-31, 2001.

24. Zoghi, B., Bolton, B., Eftekhari, K., Lagoudas, M., “An Innovative Industry-Sponsored

Semiconductor Initiative,” IEEE Frontiers in Education Conference Proceedings, November

1999.

25. Bolton, B., Zoghi, B., “A Non-Traditional Course in Electromechanical Systems for Engineering

Technologists,” IEEE Frontiers in Education Conference Proceedings, November 1999.

26. Martinez, D., Zoghi, B., “Embedded Real-Time Controls Through Application,” IEEE Frontiers

in Education Conference Proceedings, November 1999.

27. Zoghi, B., Daftarian, A., “A Cost-Effective Computer Controlled Theatrical Lighting System,”

Computers in Education Journal of ASEE, Vol. IX, No. 4, October-December 1999.

28. Zoghi, B., Zoghi, B. (brother), “PC-Based Visible Light Computed Tomography Scanner,”

Computers in Education Journal of ASEE, Vol. IX, No. 3, July-September 1999.

29. Villarreal, S., Wynn, C., Zoghi, B., “Web-Based Tutorials Emphasizing Computer-Animated

Simulations,” Computers in Education Journal of ASEE. Accepted for publication in the fourth

issue (October-December) of 1999.

30. Zoghi, B., “PC-Based Computer Controlled Curing Chamber,” Computers in Education Journal

of ASEE, Vol. IX, No. 2, April-June 1999.

31. Zoghi, B., Rouse, R., Camacho, M., Morgan, J., “Real-Time Control via the Internet,” Computers

in Education Journal of ASEE, Vol. VIII, No. 2, April-June 1999.

32. Zoghi, B., Zoghi, B. (brother), Belew, M., “Advanced Remote Medical Monitoring System,”

Computers in Education Journal of ASEE, Vol. 1X, No. 1, January-March 1999.

33. Zoghi, B., Rouse, R., Camacho, M., Morgan, J., “Real-Time Control via the Internet,” Computers

in Education Journal of ASEE, Accepted for publication in the second issue (April-June) 1999.

January 2017

34. Coté, G., Durai, R., Zoghi, B., “Nonlinear Closed-Loop Control System for Intracranial Pressure

Regulation,” Annals of Biomedical Engineering, Vol. 23, 1995.

35. Zoghi, B., Lyster, T., Puckett, R.E., “Voltage Maps Simplify Electric Circuit Analysis,” IEEE

Southeastcon, May, 1994.

36. Zoghi, B., “Principles of Medical Imaging,” (Book review) Annals of Biomedical Engineering,

Vol. 21, pp. 563-568, 1993.

37. Grubbs, A.B., Jr., Zoghi, B., “Overview of a Capstone Project Prerequisite Course,” Int. J. Engng

Ed., Vol. 9, No. 3, pp. 386-390, December 1993.

38. Zoghi, B., Puckett, R.E., “Portable Data Acquisition System for Exotic Animal Studies,”

Computers in Education Journal of ASEE, Vol. III, No. 1, January - March 1993.

39. Zoghi, B, Munnerlyn, J., “Anesthetic Flow Control System,” Computers in Education Journal of

ASEE, Vol. II, No. 4, October - December 1992.

40. Zoghi, B., Turk, J., “Personal Computer Based Voice Activated Bus Mouse for Paraplegics,”

Computers in Education Journal of ASEE, July 1992.

41. Zoghi, B., Puckett, R.E., “Development of a Low-Cost Personal Computer Based Instrumentation

for Instruction,” Computers in Education Journal of ASEE, Vol. II, No. 2, April - June 1992.

42. Zoghi, B., Lee, Y., and Nelson, D.C., “A Low-Cost Multi-Channel Analyzer with Data Reduction

Assembly for Continuous Air Monitoring System,” IEEE Transactions on Nuclear Science, Vol.

39, No. 2, Part II, April 1992.

43. Zoghi, B., Munnerlyn, J., “Anesthetic Flow Control System,” Computers in Education Journal of

ASEE, February 1992.

Conferences

1. Zoghi, B., King, P, Mobley, C., “RFID Inventory Monitoring and Control within the Engineering

Technology Department at a Major University,” Computers in Education Journal of ASEE,

March 2011.

2. Zoghi, B., Ghercioiu, M., “Industrial Applications of Wi-Fi Tags coupled with Sensors,” CIEC,

San Antonio, February 2011.

3. Zoghi, B., Linke, P., Peddy, R., Taylor, D., “Using RFID to provide higher level of safety for

Fire Fighters, CIEC, Palm Spring, Feb, 2010.

4. Zoghi, B., Abbott, P., “A Lay down Yard Optimization using RFID: A Cost and Time

perspective,” 39th ASEE/IEEE Frontiers in Education Conference, FIE, Oct., 2009.

5. Zoghi, B., “RFID-based Intelligent Smart Cabinet for Undergraduate Laboratories,” 39th

ASEE/IEEE Frontiers in Education Conference, FIE, Oct, 2009.

6. Zoghi, B., Hollar, T., Vacakar, T., MacElroy, J., “Innovation in Control Systems Lab: A LowCost

Self-Balancing Robot,” IECE, International Congress on Engineering and Computer Education,

March 2009.

7. Beasley, R., Zoghi, B., “Student Design and Development of a Tactile Display with Three

Dimensional Movements,” ASEE National, June, Austin, 2009.

8. Zhan, W., Gourlart, A., Morgan, J., Zoghi, B., Porter, J.,”Development of a Core Element for

Multiple Course Projects,” ASEE National, June, Austin 2009.

9. Eun, D.H., Zoghi, B., Buchanan, W., “Design of a Low-Cost RFID-Sensor emergency Alert

System for Solitary Old Persons,” IECE, International Congress on Engineering and Computer

Education, March 2009.

January 2017

10. Zoghi, B., Zhan. W., “Control System Project: RFID-Based Access Human Transporter,” ASEE

National, Austin, 2009.

11. Zoghi, B., McKee, B., “RFID-Based Network for Personnel and Mission-Critical Asset Tracking

in a Disaster City®, 2008 Frontiers in Education Conference, New York.

12. Zoghi, B., McGaffin, A., “Networked-Based RFID documentation Tracking Systems,”

INFORMS Southwest Regional Conference, April 18/19, 2008.

13. Zoghi, B. Buchanan, W., “Engineering Leadership: An Experiential Approach using Emotional

Intelligence,” Brazil, International Conference on Engineering and Technology Education

(INTERTECH) 2008.

14. Zoghi, Srininavasan, V., Jampani, P., “3D Visualization of a Warehouse using RFID,” World

Congress on Communication and Arts, Brazil, March 2007.

15. Zoghi, B., Buchanan, W., Porter, J., “RFID/Sensors: Emerging Technologies in Engineering

Technology’, International Conference on Engineering and Computer Education, Brazil, March

2007.

16. Zoghi, B., Ishfag, R., “Succeeding in the Service Business” Journal of Industrial Distribution,

Spring 2007.

17. Zoghi, B., Russ Read, Martin Hanssmann, Allan Griebenow, Bob McKee, “RFID and Mesh

Networking for Personnel and Mission-Critical Asset Tracking in a Disaster City®, ASEE

National Conference, June 2007.

18. Zhan, W., Zoghi, B., Fink, R., “Interdisciplinary Training and System Engineering Approach”,

ASEE National Conference, June 2007.

19. Zoghi, B., “Engineering Leadership: An Experiential Approach using Emotional Intelligence’,

ASEE National Conference, June 2007.

20. Zoghi, B., Beaseley, R., Zhan, W., “A thorough hands-on process to implement a RFID System”,

ASEE National Conference, June 2007.

21. Zoghi, B, Fink, R., “A PDA-Based RFID Intelligent System for Orchid Growers and Collectors,”

ASEE National Conference, June 2007.

22. Zoghi, B., Porter, J., Jung, Y., Thompson, S., Fink, Rainer, “Wireless Sensor Monitoring

Combined With RFID Networks,” International Journal of Modern Engineering Conference, June

2006.

23. Fink, R., Jung, Y., Zoghi, B., “Teaching the Significance of Data Correlation in Semiconductor

Testing,” International Journal of Modern Engineering Conference, June 2006.

24. Fink, R., Jung, Y., Zoghi, B., “Measuring the Acoustic Properties of Salt 1600 ft. Below Ground,”

International Journal of Modern Engineering Conference, June 2006.

25. Jung, Y.K., Zoghi, B., Fink, R., Smith, J., “Automated Individual Remote: An Industry

Sponsored Capstone Project,” International Journal of Modern Engineering Conference, June

2006.

26. Porter, J., Wright, G., Morgan, J., Zoghi, B., “The Auto Guitar Tuner: An Example of an

Innovative Capstone Process,” International Journal of Modern Engineering, June 2006.

27. Porter, J., Wright, G., Morgan, J., Zoghi, B., Fink, R., Jung, Y.K., “ Project EVIS: An Example

of an Innovative Capstone Process,” International Journal of Modern Engineering, June 2006.

28. Fink, R., Porter, J., Jung, Y., Zoghi, B., “Mixed-Signal Test Emphasis in Engineering

Technology,” Conference for Industry & Education Collaboration, submitted June 2006.

29. Fink, R., Porter, J., Jung, Y., Zoghi, B., “Test Time-Reduction in Semiconductor testing : An

analysis of University/Industry Interaction,” Conference for Industry & Education Collaboration,

submitted June 2006.

January 2017

30. Fink, R., Porter, J., Jung, Y.K., Zoghi, B., “Mixed-Signal Test Emphasis in Engineering

Technology,” CIEC, June 2006.

31. Kim, S.D., Akhavi, F., Zoghi, B., “Customer Needs Assessment for Developing Fee-based

Services,” Proceedings of the Industrial Distribution Educators Association Conference, Dallas,

March 2005.

32. Kim, S.D., Akhavi, F., Zoghi, B., “How to Design New Services using TRIZ” Proceedings of the

Industrial Distribution Educators Association Conference, Dallas, March 2005.

33. Thompson, S., Pappu, M., Zoghi, B., “Auditing of Distribution Centers,” Proceedings of the

Industrial Distribution Educators Association Conference, Dallas, March 2005.

34. Zoghi, B. “Web Integration: Its Future and Application in Value Chain Systems”, The First

International Conference on Information & Knowledge Technology, Tehran, December 30, 2003 35. Zoghi, B., M. Lockard, W. Johnson, M. Fecci, “Voice Over Internet Protocol using CDPD

Dynamic Buffering,” American Society for Engineering Education/Gulf Southwest Annual

Conference, Dallas, March 7-9, 1999.

36. Zoghi, B., Johnson, M., Corliss, S., Foster, J., Isom, D., Sannino, C., Vaughan, A. “The General

Intelligent Mobile Platform Project,” IEEE Instrumentation and measurement, Annual

Conference, 2002.

37. Zoghi, B., Tomoki, A., Palermo, A., Peterson, J., Sansom, B., Vaughan, A., “iMonitor: An

Intelligent web-based Network Device” IEEE Instrumentation and measurement, Annual

Conference, 2002.

38. Lopez, J., Zoghi, B., Guerra, J., Valdez, R., "Security Video Verification System," American

Society for Engineering Education/Gulf Southwest Annual Conference, Dallas, March 7-9, 1999.

39. Batto, L., Zoghi, B., Bailey, D., Grahmann, D., "Web Based Control Utilizing Embedded Micro

Internetworking Technology,” American Society for Engineering Education/Gulf Southwest

Annual Conference, Dallas, March 7-9, 1999.

40. Zoghi, B., Garcia, E., Morgan, T., Pechal, M., DeviceNet Network Monitoring Device, Technical

Report to Applied Materials, Spring, 1998.

41. Zoghi, B., Villarreal, S., Elkins, S., “A New Semiconductor Manufacturing Program at Texas

A&M University,” Technician Training Workshop, SEMI/SEMATECH, February 1997.

42. LaPoint M., Martir, G., Taylor, G., Zoghi, B., Belew M., “Wireless Multi-Channel Medical

Monitoring System,” ASEE/GSW, 1997.

43. Villaeral, S., Zoghi, B., “A Collaborative Multimedia, Web-Based Electronics Course: Project

Description and Survey,” IEEE Frontiers in Education Conference Proceedings, November 1996.

44. Zoghi, B., Durai, R., “Texas Instruments Field Programmable Gate Array, an Innovative Course,”

ASEE/GSW, March 1994.

45. Zoghi, B., Coté, G., Rastegar, S., “A Telemetric Implantable Optically Based Intracranial

Pressure Measurement System,” pp. 735-745, Proceedings of the Iranian Conference on

Electrical Engineering, May 17-20, 1993.

46. Zoghi, B., Culver, B., “Development of a Medical Imaging Technology Course,” ASEE/GSW

Proceedings, pp. 395-398, April 1993.

47. Zoghi, B., Coté, G., Rastegar, S., “Intracranial Pressure Measurements using an Implantable

Optically based Sensing System,” SPIE Proceeding, Vol. 1641, January 1992.

48. Zoghi, B., Rastegar, S., “Measurement of Intracranial Pressure Utilizing an Implantable Optical

Fiber Pressure Sensor,” Ninth Annual Conference on Bio-medical Engineering Research,

Houston, TX, February 1991. Published abstract.

49. Zoghi, B., Rastegar, S., “Reflective Optical Sensor for Measurement of Intracranial Pressure,”

SPIE Proceeding, Vol. 1420, January 1991.

January 2017

Technical Reports (Sponsors do not authorize Journal publications)

50. Zoghi, B., Joshi, A., “Design and Implementation of a Real-Time RFID-Based Inventory

Management System for N-Line Traffic Maintenance,” N-Line Inc., Bryan, Texas, December

2009.

51. Zoghi, B., “RFID usage for Construction, Operation and Maintenance of Nuclear Power Plants,”

South Texas Projects, August 2008.

52. Thompson, S., Zoghi, B., “Outsourcing of Manufacturing Management for ELK Corporation,”,

Elk, Dallas, TX, March 2006.

53. Thompson, S., Zoghi, B., “Quality Performance Management Through Survey Decision

Diagnostics”, Photodynamics, San Jose, CA, July 2006.

54. Zoghi, B., Thompson, S., “RFID for Intelligent Warehouse System,” House of Forgings, May

2006.

55. Zoghi, B., “Design of a OCR, RFID and Camera-based intelligent system for Pharmaceutical

Industry Application, LifeStation,” Dec, 2005.

56. Ishfag, R., Zoghi, B., “A Critical Review of Fee-based Services in Wholesale Distribution

Industry”, Industrial Distribution Magazine, September 2005.

57. Ishfag, R., Zoghi, B., “Current Services in Building Supplies Wholesale Industry”, Building-

Supplies Magazine, June 2005.

58. Barrkoh, K., Bradicich, L., Gage, N., Kantana, K., Menchaca, K., Villarreal, D., Zoghi, B., “The

Pharmaceutical Industry: A Comprehensive Study” technical report, submitted to McKesson, December

2002.

59. Cozart, R., Graybeal, M., Hebert, T., Molinar, A., Powers, P., Zoghi, B., “VARTEC Telecom:

Information Technology Trouble Tickets” technical report, submitted to VARTEC, Dallas,

December 2002.

60. Guirguis, S., Tietze, B.J., Stewart, S., Ortloft, J., Yates, B., Madison, M., Zoghi, B., “Risk

Management in Inventory Coding: A Study of the Validity of Avnet’s Current Coding System”

technical report, submitted to Avnet, Phoenix, December 2002.

61. Jonsson, A., Born, J., Dickshat, D., Guthrie, R., Mapps, E., Parks, M., Zoghi, B., “Hisco China:

Strengths, Weaknesses, Opportunities, and Threats” technical report, submitted to Hisco,

Houston, December 2002.

62. Adams, C., Arrington, C., Harrell, J., Havelka, C., Purcell, B., Weise, W., Winstead, M., Zoghi,

B., “Marketing Strategies for Supply-Chain Management” technical report, submitted to the

MedOx Group, December 2002.

63. Ismail, A., Zoghi, B., “Deployment Assessment And Methodology Of Handheld Computers For

E-Commerce And Enterprise Applications: The Limitations And Strategies For Overcoming

Them Via Wireless Solutions”.

64. Zoghi, B., Lockard M., Johnson, W., Fecci, M., “Voice Over Internet Protocol using CDPD

Dynamic Buffering,” Technical Report to Lockard & White, December 2002.

65. Zoghi, B., R. White, DMX512 Controller Servo Positioning System, Technical Report to Laser

Spectacles, Inc., December 2000.

66. Honea, S., Konneing, G., Laudermilk, N., Zoghi, B., Rocker Door Slot Valve, Technical report to

Lam Research, December 2000.

January 2017

67. Ali, Y., Fischer, J., Holcomb, H., Zoghi, B., Voice Over Network using CDPD, Technical Report

to Lockard & White, December 2000.

68. Zoghi, B. Learning with LabVIEW Book Review, OUTLOOK, National Instruments Journal,

January 2000.

69. Zoghi, B., Garcia, E., Morgan, T., Pechal, M., DeviceNet Network Monitoring Device, Technical

Report to Applied Materials, Spring, 1998.

70. Zoghi, B., Hoot, S., Marcucci, T., Gotcher, C., Edgar, J., DeviceNet Interface for Dynamic Wafer

Exchange, Technical Report to Applied Materials, Spring, 1997.

71. Zoghi, B., Bell V., Lieberman, M., Sanchex, J., DeviceNet Control and Monitor of a RF Matching

Chamber, Technical Report to Applied Materials, Spring, 1997.

72. Zoghi, B., Klimitchek, D., Mulanax, C., Richard, C., DeviceNet Control and Monitor of a Light

Tower, Technical Report to Applied Materials, Spring, 1997.

73. Zoghi, B., Prindle, J., Burke, A., VHP Dual Blade Robot Control System, Technical Report to

Applied Materials, Spring, 1996.

74. Zoghi, B., Wilburn, D., Copeland, A., Porter, S., Design of an Encoder Feedback System for a

VHP Dual Blade Robot. Technical Report to Applied Materials, December, 1995.

75. Zoghi, B., A Novel Optically Based Approach to Intracranial Pressure Measurement,

Dissertation, Texas A&M University, August 1993.

76. Zoghi, B. and Lorenzo, R., Automated Air Pressure Regulator for Smart Cars, The New School

Shop Tech Directions, July 1992.

77. Lorenzo, R. and Zoghi, B., Data Acquisition and Control using Interrupts, The New School Shop

Tech Directions, July 1992.

78. Zoghi, B., and Lorenzo, R., Data Acquisition and Control Interface, Tech Directions, October

1992.

79. Zoghi, B., Bellubi, R., A Blind Spot Detector for Highway Vehicles, The New School Shop Tech

Directions, Spring 1992.

80. Zoghi, B., Wright, G., Grubbs, A.B., The Continuous Air Monitoring System, Technical report to

Los Alamos National Laboratory, September 1991.

81. Zoghi, B., Lorenzo, R., Data Acquisition and Control Interface, The New School Tech Directions,

October 1992.

82. Zoghi, B., Hardware Design of Continuous Air Monitor, Research Report to Los Alamos National

Laboratory, December 1990.

83. Zoghi, B., Fiber Optic Pressure Sensor for Medical Applications, Technical Report, Office of

University Research, College Station, Texas, November 1990.

84. Zoghi, B., Design of a Scientific Experiment to Evaluate Traffic Sensors, Technical Report, Texas

Transportation Institute, College Station, Texas, September 1988.

85. Grubbs, A.B.; Zoghi, B.; Kruse B., Solid State Devises and Circuits Using Computer-Aided

Engineering, West Publishing Co., 1991.

Professional Development

❑ Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, June, Mays Business School, Center for Executive Development, College Station,

March, 2011.

❑ Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station,

January, 2011.

January 2017

❑ Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, January, 2011.

❑ Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, July, 2010.

❑ Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, April, 2010.

❑ Leading and Managing with Emotional Intelligence, Bill Blackwood Law Enforcement

Management Institute of Texas, Mays Business School, Center for Executive Development,

College Station, March, 2010.

❑ Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station,

November, 2010.

❑ Leading and Managing with Emotional Intelligence, Halliburton Presidential Leadership

Excellence Program, Houston, November, 2010.

❑ Leading and Managing with Emotional Intelligence, Hallmark Software Engineering Team,

Houston, October, 2010.

❑ Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station, August,

2010.

❑ Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station, May,

2010.

❑ Leading and Managing with Emotional Intelligence, Halliburton Leadership Development

Program, Mays Business School, Center for Executive Development, College Station, March,

2010.

❑ Leading and Managing with Emotional Intelligence, Nov, College Station, $10,000, 2008

❑ Leading and Managing with Emotional Intelligence, May 14-16, Dallas, 2008, $12,000

❑ Leading and Managing with Emotional Intelligence, January 14-16, Austin, 2008, $12,000

❑ Project Management Tools and Techniques, June –July 2006, $10,000

❑ Developing Emotional Intelligence at Workplace, December 2006, $12K

❑ Master’s Certificate in Project Management, January 2007 – May 2007, $130,000

Student Research/Projects Advising:

A. Undergraduate:

• Kyle Hodgeson, Michael Banaczyk, Aguirre, Joana, Chelby Lusinger “Vibeband

system,” Capstone Project, June 2015 – present.

January 2017

• Cody Lewis, Richard Horner, Lindsey Jenschke, “WiMi – Wireless RFID-based tracking

system,” Capstone Project, August 2015 – June 2015.

● Nick Curley, Adrian Ozer, James Hutzley, Eric Fitzmon, “Smart Badge,” Capstone

Project, January 2013 – December 2013.

● Tyler Halbert, Micah Hignight, Justin Lacy, Ruth Mitze, Mechanical Engineering,

“RFID Implementation Proposal for Tracking of Manufacturing Process at ATI Firth

Sterling”, Capstone Project, August 2012 – May 2013

● Shahram Ighbal, Electrical Engineering, Capstone Design Project, August 2012 – May

2013

● Daniel Wagner, Jurvin Li, Akram, Fayaz, , Señor Capstone Project, January 2010 –

February 2011

● Archie Wilson, Chris Landry, Kostas Papasideris, Brad Sutter, Fall 2008-Spring 2009 ●

Joseph Christoferson, Jaime Burgoa, Derek Rodriguez, Señor Capstone Project, Fall

2005-Spring 2006

B. Masters:

● Loan De Deus Vieira Cardoso, Mechanical Engineering, 2015 ● Arash Torkan, Electrical

Engineering, 2015.

● Narayani Vedam, Electrical Engineering, 2014.

● Bo Tian, Electrical Engineering, 2014.

● Hubert Attah, Electrical Engineering, 2014.

● Shokoufeh Arbabi, Electrical Engineering, 2013.

● Eugene Foli, Electrical Engineering, 2012.

● Pawan Garg, Electrical Engineering, 2012.

● Aditya Joshi, Industrial Engineering, Co-Chair, 2009.

● Ahmad Tavakoli, Electrical Engineering, 2007.

● Antonarod, Richard, Masters of Industrial Distribution, Chair, 2005.

● Baker, Brian, Masters of Industrial Distribution, Chair, 2005.

● Baker, Mindy, Masters of Industrial Distribution, Chair, 2005.

● Baker, Van, Masters of Industrial Distribution, Chair, 2005.

● Bell, James, Masters of Industrial Distribution, Chair, 2005.

● Elliott, Stephen, Masters of Industrial Distribution, Chair, 2005.

● Estrada, Fernando, Masters of Industrial Distribution, Chair, 2005. ● Marroquin, Tegan,

Masters of Industrial Distribution, Chair, 2005.

● Stith, Halley, Masters of Industrial Distribution, Chair, 2005.

● Vu, Dung, Masters of Industrial Distribution, Chair, 2005.

● Brown, Chris, Masters of Industrial Distribution, Chair, 2004.

● Catchings Jason, Masters of Industrial Distribution, Chair, 2004.

● Davis Len, Masters of Industrial Distribution, Chair, 2004.

● Fontana John, Masters of Industrial Distribution, Chair, 2004.

● Harper Mitch, Masters of Industrial Distribution, Chair, 2004.

● Hamlin Todd, Masters of Industrial Distribution, Chair, 2004.

● Hayman Bill, Masters of Industrial Distribution, Chair, 2004.

● Herrera Carol, Masters of Industrial Distribution, Chair, 2004.

● Jennings Steve, Masters of Industrial Distribution, Chair, 2004.

● Mitchell Nathan, Masters of Industrial Distribution, Chair, 2004.

January 2017

● Myers Bryan, Masters of Industrial Distribution, Chair, 2004.

● Sharp Tim, Masters of Industrial Distribution, Chair, 2004.

● Thode Keith, Masters of Industrial Distribution, Chair, 2004.

● Williams Tate, Masters of Industrial Distribution, Chair, 2004. ● Claudia Mayasari,

Industrial Engineering, Member, 2003.

● Borsh, Robert, Masters of Industrial Distribution, Chair, 2003.

● Edlin, Craig, Masters of Industrial Distribution, Chair, 2003. ● Elliott, John, Masters of

Industrial Distribution, Chair, 2003.

● Evans, Phillip, Masters of Industrial Distribution, Chair, 2003.

● Germano, Charles Masters of Industrial Distribution, Chair, 2003.

● Harvey, Gary, Masters of Industrial Distribution, Chair, 2003.

● Hinchman, Daniel, Masters of Industrial Distribution, Chair, 2003.

● Segura, Brandon, Masters of Industrial Distribution, Chair, 2003.

● Ratner, Harold, Masters of Industrial Distribution, Chair, 2003.

● Scott, John, Masters of Industrial Distribution, Chair, 2003.

● Claudia Mayasari, Industrial Engineering, Member, 2003.

● Amer Ismail, Industrial Engineering, Member, December 2001.

● Richard A. Welch, “Static Power Conversion Technique for Utilizing Unique Energy

Sources,” Electrical Engineering, August 1998.

● Karen J. Slater, “Application Aspect of 12 and 24 Pulse Rectifiers for Adjustable Speed

Drives,” Electrical Engineering, August 1998.

● Afshin Shaybani, “Implementation of a Multi-Carrier Modulation based Modem on the

TI TMS320C54 DSP,” Electrical Engineering, June 1998.

● Daud Omar, “Lateral Control of Articulated Vehicles for Automated Highway Systems

under Uncertainty in Vehicle Parameters,” Mechanical Engineering, June 1998.

● Manish J. Patel, “Efficient Computation of Morphological Texture Features,” Electrical

Engineering, May 1998.

C. Doctorate:

● Ali Pourghorban Saghati, Electrical Engineering, 2017

● Niloofar Torabi, Electrical Engineering, 2017

● Ashkan Roshan Zamir, Electrical Engineering, 2017

● Forouzan Farina, Education Higher , 2016

● Babak Fahimi, Electrical Engineering, 2015

● Vahid Dabbagh Rezaei, Electrical Engineering, 2014

● Seyed Moosavi Torshizi, Electrical Engineering, 2014

● Negar Rashidi, Electrical Engineering, 2014 ● Eddy Aeloiza, Electrical Engineering,

2012 ● Jaeyoung (Jake) Lee, Electrical Engineering, 2013. ● Cuong Huynh, Electrical

Engineering, 2012

● Ali Eskandari, Electrical Engineering, 2011

● Amitava Biswas, Computer Science, 2010

● Barani Raman, Computer Science, Committee Member, 2005

● Jayaraman, Sachindranath PhD Math, GCR, 2007

● Michael Keith Wilkerson, Kinesiology, GCR, 2002

● Jeff McDougall, Electrical Engineering, Member, 2003

January 2017

● In-Sun Shim, Education Human Resource Development, GCR 2001 ● Michael Keith

Wilkerson, Kinesiology, GCR, 2002 ● Jeff McDougall, Electrical Engineering, Member,

2003.

● Bill Fox, Rangeland Ecology & Management, GCR, 1998

● Michael Keith Wilkerson, Kinesiology, GCR, 2002

GRANTS:

➢ NSF grant to participate in a workshop on “Semiconductor Manufacturing Training Workshop,”

Albuquerque TVI, New Mexico, January 5-9, 1998.

➢ Applied Materials grant to participate in a short course on "Design of Experiments," Santa Clara,

CA, June 12, 1997.

➢ Applied Materials grant to participate in a short course on "Microelectronics Fabrication," Austin,

Texas May 29 - June 2, 1997.

➢ Motorola grant to participated in a short course on “ANSI C for Embedded Systems,” Ann Arbor,

MI, December 10-13, 1996.

➢ Motorola grant to participate in a short course on "68332 Microcontrollers," Phoenix, AZ August

19-26, 1996.

➢ Applied Materials grant to participate in a short course on “Semiconductor System

Functionality”, Santa Clara, CA. May 29 - June 2, 1995.

➢ Texas Instruments grant to participate in a short course on “Field Programmable Gate Array

(FPGA) Technology”, Dallas, TX. July 10-13, 1994.

➢ Motorola grant to participate in a short course on “DSP56000/1 Microprocessor”, Phoenix, AZ.

August 19-26, 1994.

➢ ASEE grant to participate in the National Teaching Effectiveness Institute, Toledo, Ohio. June

25-28, 1992.

➢ Radiological Society of North America (RSNA) grant to participate in a short course on

“Diagnostic Imaging Techniques,” Chicago, III. December 5-9, 1991.

➢ Phillips Medical System grant to participate in a short course on “The Basics of X-ray Imaging,”

Sacramento, CA. August 11-13, 1991.

➢ Instrument Society of America the 37th International Instrumentation Symposium grant to

participate in a short course on “Instrumentation and Testing,” San Diego, CA. May 5-9, 1991.

➢ ASEE grant to participate in a short course on “Microprocessor-Based Mechanical Systems,”

University of California, Berkeley, CA. January 7-15, 1991.

➢ Motorola grant to participated in a short course on “Microcontroller 68HC11 for Applications,”

Austin, TX. June 5-8, 1990.

➢ NSF grant to participate ASEE, course "Microprocessor-Based Mechanical System," University

of California, Berkeley, California, Spring 1991.

➢ NSF grant to participate ASEE, course "Lasers and Optics for Applications," Massachusetts

Institute of Technology, Cambridge, Massachusetts, Summer 1989.

➢ NSF grant to participate ASEE, course "Engineering Workstations," Rice University, Houston,

Texas, Summer 1988.

➢ Faculty grant from ECF, (Eastern Communication Forum) to attend ECF, Washington, DC, 1989.

➢ Faculty grant from NCF, (National Communication Forum) to attend NCF, Chicago, Illinois,

1988.

January 2017

➢ NSF/ASEE grant to attend the Design Automation Conference, Anaheim, California, 1988.

PRESENTATIONS:

Zoghi, B., Sartor, A. Invited Speakers, “SMART Campus Industry/Univ. Educational Initiative at

Texas A&M, CICE Conference, Austin, Texas - February 4th, 2016.

Zoghi, B. Modertaor, CIPD Industry Roundtable, “Industry/University Partnership, CICE

Conference, Austin, Texas - February 4th, 2016.

Zoghi, B., invited speaker, “RFID in Oil and Gas 101,”RFID Journal Annual Conference,

Orlando, April 2010.

Zoghi, B., RFID Oil and Gas Panel Moderator, “RFID: Tracking the Rig, Vessels and People,”

Offshore Communication, November 2009.

Zoghi, invited speaker, Oil and Gas Standards Development, Oracle OpenWorld Annual

Conference, San Francisco, Oct 2009. Zoghi, B., Game Changer, next Generation of Technology, CTO’s office at BP, Houston, Texas,

Jan 2010

Zoghi, B., invited speaker, “What got you in, will not get you there,” SKEE Week, Student

organization, Feb., 2009.

Zoghi, Keynote, Tracking Savings: Active RFID in Construction, RFID Journal Middle East, Jan

5-7, Dubai, 2009.

Zoghi, Keynote, RFID Standards for the Oil and Gas Industry, RFID Journal Middle East, Jan 57,

Dubai, 2009.

Zoghi, B., Leading in a Turbulence times, AWC, Houston, Nov 2008.

Zoghi, B., Keynote, RFID Trace and Track Application for Oil Field Drill Pipes Manufacturer,

ARAB RFID, Dubai, October 2008.

Zoghi, B., RFID in Oil & Gas, ARAB RFID, Dubai, October 2008.

Zoghi, B., RFID Panel Discussion, RFID Future and how it plays in Middle East, ARAB RFID,

Dubai, October 2008.

Zoghi, B., Engineering Emotional Intelligence Seminar, College of Engineering Space

Engineering Initiative (SEI), spring 2008.

Zoghi, B., Creativity and creation via Emotional Intelligence, Keynote, University Advisors and

Counselors, 2008 Symposium.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2007.

Zoghi, B., Emotional Intelligence for Project Managers, Keynote, Annual Project Management

Conference, Houston, Texas, Fall 2007.

Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2006.

Zoghi, B., Emotional Intelligence for Public Service Leadership,” Workshop II, George Bush

School of Government and Public Services, spring 2006 Zoghi, B., Emotional

Intelligence for Public Service Leadership,” Workshop I, George Bush

School of Government and Public Services, spring 2006

Zoghi, B. “Leading Industrial Sales Team”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, January 24, 2005

Zoghi, B., Impact of Emotional Intelligence for Cross-Cultural Leadership, Symposium on Cross Cultural Leadership: International University of Monaco, June 2005

Zoghi, B. “Enhancing Distributor Profitability”, Building Supplier Corporation, Thomas and

January 2017

Joan Read Center for Distribution Research and Education Seminar, December 9, 2004

Zoghi, B. “Leadership”, Association of Equipment Distributors, Thomas and Joan Read Center

for Distribution Research and Education Seminar, November 15, 2004

Zoghi, B. “Leading Positive Change”, Building Supplier Corporation, Thomas and Joan Read

Center for Distribution Research and Education Seminar, November 15, 2004

Zoghi, B. “Effective Negotiations”, CDM2 in York University, Canada, August 17, 2004 Zoghi,

B. “Leading the Sales Team – Emotional, Intelligence Leadership Styles”, CDM2 in York

University, Canada, August 16, 2004

Zoghi, B. “Principles of Distributor Profitability”, CDM1 in York University, Canada, July 12,

2004

Zoghi, B. “Improving Distribution Profitability”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, January 12, 2004

Zoghi, B. “Distribution Profitability”, Thomas and Joan Read Center for Distribution Research

and Education Seminar, December 15, 2003 Zoghi, B. “Leadership Development”, Thomas

and Joan Read Center for Distribution Research and Education Seminar, December 2, 2003

Zoghi, B. “Leadership Styles”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, November 3, 2003

Zoghi, B. “Leading Business with Emotional Intelligence”, Thomas and Joan Read Center for

Distribution Research and Education Seminar, November 3, 2003 Zoghi, B. “Financial

Transactions of Industrial Distribution”, Thomas and Joan Read Center for

Distribution Research and Education Seminar, October 6, 2003

Zoghi, B. “Leadership Development”, Thomas and Joan Read Center for Distribution Research

and Education Seminar, October 6, 2003

Zoghi, B. “Improving Distribution Profitability”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, April 1, 2003

Zoghi, B. “Introduction to Financial Management”, Thomas and Joan Read Center for

Distribution Research and Education Seminar, March 31, 2003

Zoghi, B. “Understanding & Improving Supply Chain Relationship”, Thomas and Joan Read

Center for Distribution Research and Education Seminar, March 21, 2003

Zoghi, B. “Effective Leadership”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, February 17, 2003

Zoghi, B. “Effective Negotiations”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, January 28, 2003

Zoghi, B. “Effective Leadership in Distribution”, Thomas and Joan Read Center for Distribution

Research and Education Seminar, January 27, 2003

Zoghi, B. “Sales Leadership”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, November 4, 2002

Zoghi, B. “Managing and Improving Profitability Part One: Fundamentals”, Thomas and Joan

Read Center for Distribution Research and Education Seminar, November 4, 2002

Zoghi, B. “Inventory Management Case Study: Ray Distributing”, Thomas and Joan Read Center

for Distribution Research and Education Seminar, October 18, 2002

Zoghi, B. “Inventory Management Case Study: My Plumbing Supply”, Thomas and Joan Read

Center for Distribution Research and Education Seminar, August 9, 2002

Zoghi, B. “Effective Negotiations”, Thomas and Joan Read Center for Distribution Research and

Education Seminar, June 28, 2002 Zoghi, B., “Development of a Semiconductor Manufacturing Engineering Technology at Texas

A&M,” Applied Materials Corporate Division, Santa Clara, CA, April 30, 1998.

January 2017

Zoghi, B.,”Panel Discussion on the 2+2 articulation Program,” Third Annual Conference,

Advanced Technology Education in Semiconductor Manufacturing,” July 29-August 1, 1997.

Zoghi, B., “Semiconductor Manufacturing Education at Texas A&M,” Corporate Division of

Applied Materials, October 15-16, 1997.

Zoghi, B.”A Progress Report on Semiconductor Manufacturing Program at Texas A&M,” Annual

TASET Meeting. September 1997. Zoghi, B., “Semiconductor Manufacturing Technology Program,” SEMATECH &

SEMI/SEMATECH, Austin, Texas, February 3-4, 1997.

Zoghi, B., “The Role of Honor Students in the Society,” Engineering Technology Department,

University of North Texas, Spring 1996.

Zoghi B., “To Be or Not To Be a Summer Industry Professor,” to Engineering Technology

Department, University of North Texas, November 27, 1996.

Zoghi, B., Lyster, T., Puckett, R. E., "Voltage Maps Simplify Electric Circuit Analysis," IEEE Southeastcon, Miami, FL May 19-15, 1994.

Zoghi, B., Culver, B., "Development of a Medical Imaging Technology Program," to Gulf-

Southwest Section of ASEE, Austin, Texas, April 2, 1993.

Zoghi, B., "Development of a Medical Imaging Technology Course," to Industry/University

Relations, ASEE, Toledo, Ohio, June 23, 1992.

Zoghi, B., "A New Technical Elective on Medical Imaging Technology," to Biomedical Equipment

Technology at Texas State Technical College, Waco, Texas, November 1, 1991.

Zoghi, B., "Technical Content of Medical Imaging Technology Course," to technical staff of R.P.

Kincheloe, Houston, Texas, October 25, 1991.

Zoghi, B., "Reflective Optical Sensor for Measurement of Intracranial Pressure," Ninth Annual

Conference on Biomedical Engineering Research in Houston, University of Houston, Texas,

February 78, 1991.

Zoghi, B., "Measurement of Intracranial Pressure Utilizing an Implantable Optical Fiber

Pressure Sensor," Bioengineering Seminars, Texas A&M University, February 1, 1991. Zoghi, B. "Optical Fiber Sensors for Medical Applications," Bioengineering Laser Group, Texas

A&M University, November 1990.

Zoghi, B. "Role of Honor Society in Engineering Technology," Engineering Technology

Department, University of Houston, Houston, Texas, Fall 1990.

EDITORIAL:

➢ Editor-in-Chief of the International Journal of Automated Identification Technology (IJAIT)

2015-present.

➢ North American Editor for the Chinese Journal of Technology and Management, 2005 – present.

➢ Edited Journal papers for the Journal of Automation in Construction, March 2007.

➢ Board of Directors (2014-2017) – ASEE-CIPD (College-Industry Partnership Division

➢ Chair (2018) - ASEE-CIPD (College-Industry Partnership Division

➢ Chair-Elec (2017-2018) - ASEE-CIPD (College-Industry Partnership Division

➢ Board of Directors (2014-2017) - IAJC/ISAM (International Association of Journals &

Conferences/International Society of Agile Manufacturing)

HONORS:

University Level Association of Former Students' Distinguished Achievement Award in Teaching,

January 2017

2008

Tau Alpha Pi, National Engineering Technology Honor Society, Faculty Advisor, 1990- Present Motorola Faculty Fellow, College of Engineering, Texas A&M University, April 1998.

Association of Former Students Distinguished Teaching Award, Texas A&M University, September 1994.

Member of Sigma Xi Research Society, Spring 1994.

Elected as Senior Member of the Institute of Electrical and Electronics Engineers, Summer 1992.

Associate Member of Sigma Xi Research Society, Spring 1992. Listed in Who's Who of Emerging Leaders in America," 1992.

"Who's Who in the Dictionary of International Biography," Cambridge, England.

Chapter Advisor for Tau Alpha Pi, the National Honor Society for Engineering Technology.

Academic Excellence Award for 1990-1991, Texas A&M University.

Listed in "Who's Who Among American Professionals," 1992.

Listed in "Who's Who in the South and Southwest," 1990.

Member of Alpha Eta Mu Beta, the National Bioengineering Honor Society.

Member of the Tau Alpha Pi, the National Engineering Technology Honor Society.

Member of Tau Beta Pi, the National Engineering Honor Society.

The 1980 Engineering Student Scholarship Award in the Division of Science and Mathematics from

Peter Kiewits Son's Company, Seattle Central College.

SCIENTIFIC AND PROFESSIONAL SOCIETIES: Institute of Electrical and Electronics Engineers. (IEEE)

American Society of Engineering Education. (ASEE)

IEEE Lasers and Electro-Optics Society. (IEEE)

The International Society for Optical Engineering. (ISOE)

American Association for the Advancement of Science. (AAAS)

Society of Photo-Instrumentation Engineers. (SPIE)

Sigma Xi

Tau Alpha Pi Honor Society Tau Beta Pi Honor Society

International Leadership Association (ILA)

University and Community Services ● Member, ETID Departmental Growth Committee. January 2013 – present.

● Chairman of EET/TET Curriculum Committee Vision 2015, Fall 2010-2012.

● Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2009.

● Zoghi, B., Leading in a Turbulence times, AWC, Houston, Nov 2008.

● Zoghi, B., Keynote, RFID Trace and Track Application for Oil Field Drill Pipes Manufacturer,

ARAB RFID, Dubai, October 2008.

● Zoghi, B., RFID in Oil & Gas, ARAB RFID, Dubai, October 2008.

● Zoghi, B., RFID Panel Discussion, RFID Future and how it plays in Middle East, ARAB RFID,

Dubai, October 2008.

● Zoghi, B., Engineering Emotional Intelligence Seminar, College of Engineering Space

Engineering Initiative (SEI), spring 2008.

● Zoghi, B., Creativity and creation via Emotional Intelligence, Keynote, University Advisors and

Counselors, 2008 Symposium.

January 2017

● Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2007.

● New Associate Director of ERC-NSF Proposal, a major research center initiative in the College of

Engineering, January 2010 – Present.

● Curriculum Committee Change Evaluation, Chair, Feb 2010 – August 2010 ● Member, College

of Engineering Tenure & Promotion, 2008 -2010.

● Presentation to minority students on Leadership, Fall 2009

● Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2009.

● Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen,

Spring 2009.

● Presentation to SKEE Week, Student organization, Feb., 2009

● Invited presentation to American Women Computing (AWC) Group on Houston, on Leading in a

Turbulence times, Nov 2008.

● Zoghi, B., Engineering Emotional Intelligence workshop, College of Engineering Freshmen, Fall

2008.

● Member, ETID Tenure & Promotion, 2007-present.

● Offering the short course to the Student Leadership services on the 7 Habits of Highly Effective

People, Spring 2008, fall 2008.

● Faculty sponsor, Texas A&M Solar Decathlon National Competition,

http://archone.tamu.edu/solardecathlon/team.htm , Fall 2006 - Spring 2008.

● Mentor to ETID and Aero and Computer Science Junior Faculty. 2005 – present

● Member of Organizing Committee, Symposium on Cross-Cultural Leadership: International

University of Monaco, June 2005

● Member of Board of Director, Hisco Electronics Distribution, Houston, 2004-2006

● Member of College of Engineering Chair Professors, 2002- 2005

● Member, Departmental Strategic Planning Committee, Spring 1998-present.

● Chairman, Engineering Technology Tenure and Promotion Peer Review Committee, 1994-2005.

● TAMU Graduate Faculty, 1993-present.

● Represented Department at University commencement ceremonies, 1990-2005.

● Member, Search Advisory Committee meeting for the Vice Chancellor and Dean position of the

Dwight Look College of Engineering and Director, Texas Engineering Experiment Station,

20012002.

● Engineering Technology Departmental representative on the College of Engineering Tenure and

Promotion Peer review Committee, 2000-2002.

● Chairman, ETID Tenure & Promotion Chair, 2000-2002. ● Chairman, Engineering Technology

social committee, 2000-2001 ● Member, ETID Scholarship Committee, Spring 2001.

● Reviewer of IEEE Sensors Journal, “Real-Time Observation System for Tele-Micro-Operation by

Kohtaro Ohba and et al., December 2000

● Board of Directors, WEST (Women in Engineering, Sciences, and Technology), Spring

19992001.

● Member, ETID six out of ten tenure-track mentoring committee, 1999-2000

● Member, Engineering Technology Tenure and Promotion Peer Review Committee, 1994-1999.

● Member, Departmental Faculty Search Committee, Spring 1998.

● Member, Department Head Search Committee, Spring 1997.

● Chairman, Semiconductor Manufacturing Curriculum Committee, Fall 1997.

● Departmental Representative, College of Engineering Post Tenure Review Committee,

JulyAugust, 1997.

January 2017

● Faculty Advisor, Tau Alpha Pi, National Engineering Technology Honor Society, 1990-1998.

● Chairman, Faculty Search Committee, Electronics Engineering Technology, 1995 – 1996.

● Member, Engineering Technology Master Degree Planning Committee, 1994-1995.

● Faculty Advisor, IEEE region 5 Design Concert, Springfield, Colorado, May 1994. ●

Departmental United Way Representative. TAMU, College Station, TX, Fall 1991.

● Member, Faculty Search Committee, Electronics Engineering Technology, 1990 – 1991. ●

Volunteer work during the “Give Five” Telethon to work with the Brazos Valley Arthritis

Society, Spring 1991 and the Brazos Valley Cerebral Palsy Association, Spring 1990.

● Participated in event to benefit the Muscular Dystrophy Association (MDA), College Station, TX,

Spring 1990.

● Chairman, student paper contest, 7th Annual Symposium on Information Transfer. TAMU,

College Station, TX, January 1990.

● Chairman, Departmental Search Committee for a computer system manager, 1988-1989.

● Judge, Science Engineering fair in the division of Engineering, Houston, Texas, March 1989.

● Faculty advisor, IEEE region 5 Design Contest in which EET students won the first prize, Dallas,

Texas, May 1989.

● TAMU liaison with Texas State Technical Institute, Fall 1990 – present.

● TAMU liaison with MicroSim Corporation (CAD/CAE). MicroSim Corporation is the exclusive

owner of the mark “PSPICE” used in connection with computer programs. MicroSim is based in

Irvine, CA, August 1988 – 1996.

OTHER ITEMS

➢ Created a major Consortium to focus on the use of Emerging Technologies for Oil & Gas

industry, RFID Oil & Gas Solution Group Consortium, http://rfid.tamu.edu. Generated a state-

ofthe-art Laboratory, equipment donations, projects, funding, membership dues, white papers,

many invited speaking engagements, and more.

➢ In collaboration with the Testing division of Motorola, I was able to secure a tester at a value of

$1,000,000 to further enhance the EET/TET effort in the area of testing. I made sure Dr. Fink

gets included for the credit to help him for his future promotion.

➢ A $2000 equipment and $1000 cash donation was also secured from TAC to support a senior

design project. To further support the junior faculty, I made sure the credit goes to Dr. Jung to

encourage him to seek industry sponsored projects.

➢ A $5000 donation from Axcess International Active RFID company was made to the newly

developed Sensors/RFID Lab.

➢ In January 2006, in collaboration with George Bush School of Government and Public Service, I

have submitted an informal proposal to a potential donor requesting $8 Million dollar gift to

establish:

➢ Paul Meyer Center for Public Service Leadership; and a Paul Meyer Endowment for the

Distinguished Practitioner's Chair for Leadership Paul Meyer "Grand Master's" Leadership

Education Program

➢ Being invited by the University to offer a new course on Freshman Seminar Class for fall 2008.

Home: 827 S. Rosemary

Bryan, Texas 77802

Phone: (979) 268-2737

January 2017

Cell: (979) 676-3533

Work: ETID Department

Texas A&M University

College Station, TX 77843-3367

Phone: (979) 845-4074

E-mail: zoghi@tamu.edu

Company: ZRTLS – RFID Tracking Solution CEO/President