dr. shahzad maqsood khan - pu.edu.pkpu.edu.pk/images/cv/15101196511402.pdf · and commissioning of...

Profile of Dr. Shahzad Maqsood Khan of 20

Dr. Shahzad Maqsood Khan B.Sc, M.Sc, Ph.D Chem Engg Cell No: +92-0321/0331/0300-7152120

Email: [email protected]

___________________________________________________________________________________________

EXECUTIVE PROFILE

Chemical Engineering Professional with solid experience of approximately FIFTEEN years in

R&D, management, production, design and teaching. Currently I am part of Punjab University

working as Incharge, Department of Polymer Engineering & Technology. Along with

administration I am teaching various engineering courses of Ph.D, graduate and post

graduate students of Polymer and Industrial engineering. I have also worked on projects of

Higher Education Commission (HEC) Pakistan. As Assistant head of project, I was responsible

for end to end delivery of Turnkey and Non-Turnkey projects. I am rated among Top Ranked

Personals of HEC Projects in Polymer Engineering Department as I delivered several important

projects to the organization. The key deliverables include but are not limited to:

Teaching Ph.D, graduate and post graduate students of engineering and sciences

Design research projects based on real world problems of Chemical/Polymer industry or

universities

Work for project execution from zero to final stages (R&D, Installations, Designing, Erection

and Commissioning of plants, machinery and instruments).

Design and implement work plans for complete execution of projects.

Responsible for successful project completion as per Time, Cost and Scope plan.

Got foreign trainings (from AMERICA) on state of the art Characterization Instruments

International tenders and bids evaluation for purchase of instruments and plants.

Labs establishments and instruments installations.

Managing in time and quality production on plants.

Lead team of engineers & technicians for smooth running of instruments, Plants, machinery

and continual testing of samples.

Supervision of thesis and research papers and teaching.

SCHOLASTIC RECORD

Ph. D Chemical Engineering 2009-2010

Institute of Chemical Engineering & Technology University of the Punjab Lahore Pakistan

Course Work CGPA 3.70.

M.Sc Chemical Engineering 2005-2006

Institute of Chemical Engineering & Technology University of the Punjab Lahore Pakistan 1st Div;

GPA 3.0; 812/1100; 73.63%

mailto:[email protected]


B.Sc. Chemical Engineering with Spec. in Pet. & Gas Tech. 1999-2003

Institute of Chemical Engineering & Technology University of the Punjab Lahore Pakistan 1 st Div;

3356/4800; 70.00%

F. Sc 1996-1998

Board of Intermediate & Secondary Education Gujranwala 1st div; 785/1100; 71.36%

Matriculation 1994-1996

Federal Board of Intermediate & Secondary Education Islamabad 1st div; 671/850; 78.84%

Diploma in Environmental Law 2013-2014

Punjab University Law College University of the Punjab Lahore Pakistan 261.50/400; 65.25%;

Grade B

Diploma in International Trade Law 2015

Punjab University Law College University of the Punjab Lahore Pakistan; Result Awaited

GRADUATE AND POST GRADUATE THESES

1. Polymer Composites to be used for Biomaterial and Engineering Applications (Ph.D

Research Thesis)

2. LATICES; Synthesis, Properties & Characterization (Research Project; M.Sc Chemical

Engineering Thesis)

3. Production of Phenol from Cumene (B.Sc Chemical Engineering Final Project Report)

4. Production of Iso Amyl Acetate by Using Different Catalysts (Process Project; B.Sc Chemical

Engineering)

PROFESSIONAL EXPERIENCE

PROFESSIONAL HISTORY at PUNJAB UNIVERSITY PAKISTAN

Incharge; Department of Polymer Engineering & Technology University of the

Punjab Lahore Pakistan Aug 22, 2017 to date

Assistant Professor (Contract) Nov 2016- To date

Department of Polymer Engineering & Technology University of the Punjab Lahore Pakistan

Lecturer (Contract) Oct 2011- Oct 2016

Department of Polymer Engineering & Technology University of the Punjab Lahore Pakistan

Assistant Professor/Researcher (Contract) July 2010 – Sept 2011

Establishment of Industrial Research Labs Project Higher Education Commission (HEC)-Institute

of Chemical Engineering & Technology University of the Punjab Lahore Pakistan

Chemical Engineer/Researcher (Contract) Feb 2009 – June 2010

Establishment of Research Laboratories for Polymers Project Higher Education Commission

(HEC)-Institute of Chemical Engineering & Technology University of the Punjab Lahore Pakistan


Research Scholar (Contract) April 2007– Jan 2009

Pervaporation Project Higher Education Commission (HEC)-Institute of Chemical Engineering &

Technology University of the Punjab Lahore Pakistan

Courses Taught & Academic Workings

Courses taught on for Ph.D Polymer Technology Program

o Bio Materials

o Polymer Process Technologies

o Polymer Characterization Instruments

Courses taught on Post Graduate Level of M.Phil Polymer Technology Program PET PU

Lahore

o Polymer Rheology and Processing

o Fundamental of Polymer Sciences

o Membrane Science and Applications

o Polymer Plant and Control

o Reaction Kinetics and Design

o Polymer Process Technologies

o Polymer Process and Design

o Rheology and Processing (Lab)

o Polymer Synthesis and Characterization (Lab)

o Extruding and Injection Molding (Lab)

Courses taught of Graduate Students of B.Sc Industrial Engineering in Institute of Quality

and Technology Management PU Lahore

Course Coordinator Ph. D Polymer Technology Program PET PU Lhr

Sep, 23, 2014-Aug 22, 2017

Course Coordinator M. Phil Polymer Technology Program PET PU Lhr

Sep 23, 2014-Aug 22, 2017

Member Committee for identification of patentable research work done by the faculty of

University of the Punjab Aug 30, 2017

Member Adhoc Committee to Discharge the Function of Board of Studies (BOS) in Polymer

Engineering & Technology University of the Punjab Lahore Pakistan Aug 08, 2017

Sub Editor Journal of Faculty of Engineering & Technology University of the Punjab Lahore

Pakistan Aug 08, 2017

Member Committee to prepare GRE (General) & GRE (Subject) tests for admission in

MS/M.Phil and Ph.D or equivalent programs (Polymer Technology) of the Department of

Polymer Engineering & Technology University of the Punjab Lahore Pakistan July 26, 2017


Member Departmental Doctoral Program Committee (DDPC) of the Department of

Polymer Engineering & Technology University of the Punjab Lahore Pakistan July 26, 2017

Member Committee to “Prepare a detailed feasibility report for installation of Potable

Water and Bottling Plant” at the University of the Punjab Lahore Pakistan March 03, 2017

Member Committee for “Evaluation of research project” University of the Punjab Lahore

Pakistan Feb 13, 2017

Member Adhoc Committee to Discharge the Function of Board of Studies (BOS) in Polymer

Engineering & Technology University of the Punjab Lahore Pakistan Feb 16, 2016

Member Departmental Purchase Committee for Department of Textile Engineering &

Technology University of the Punjab Lahore Pakistan May 12, 2015

Member Board of Faculty (BOF) of Engineering & Technology University of the Punjab

Lahore March 04, 2013

Member Departmental Purchase Committee for Department of Polymer Engineering &

Technology University of the Punjab Lahore Pakistan Oct 16, 2012

Assistant Superintendent of hostel University of the Punjab Lahore Pakistan

Sep 17, 2008-Nov 2015

Complete responsibilities for making course work, managing departmental affairs,

conducting exams, management of labs and performing practical’s.

Managing departmental activities covering all departmental matters like laboratories

establishment, purchases, tender and administration etc.

Supervising research projects of Masters and Graduate students to provide them technical

as well as administrative support to complete their research objectives.

Research Projects

Principal Investigator (PI) for research project “Synthesis and characterization of polymers

blends for packaging applications” 2017-2018 0.150 Mill Rs, Punjab University Research

Grant (In Progress)

Principal Investigator (PI) for research project “Synthesis of polymer blends and composites

based on synthetic and natural polymers” 2017 0.498 Mill Rs, SRGP HEC Pakistan (In

Progress)

Principal Investigator (PI) for research project “Synthesis and characterization of polymers

based absorbents and carrier materials” 2015-2016 0.125 Mill Rs, Punjab University Research

Grant (Completed)

Principal Investigator (PI) for research project “Synthesis of hydrogels for bio medical and

industrial applications” 2014-2015 0.125 Mill Rs, Punjab University Research Grant

(Completed)


Principal Investigator (PI) for research project “Study on Synthesis and Characterization of

Various Polymer Composites for Industrial Applications” 2013-2014 0.125 Mill Rs, Punjab

University Research Grant (Completed)

Principal Investigator (PI) for research project “Polymer Composites to be Used for Bio

Material and Engineering Applications” 2012-2013 0.125 Mill Rs, Punjab University Research

Grant (Completed)

Worked as assistant Leading and monitoring person on project of HEC “Establishment of

Indutrial Research Lab for Material Synthesis and Characterization of 52.982 Mill Rs


Research Laboratories for Polymer and Material Synthesis, Characterization Rheology and

Processing 38.784 Mill Rs


Research Labs for polymers of 1.000 Mill Rs in terms of complete establishment at Punjab

University Lahore Pakistan.

Project of synthesis and characterization of bio-polymers used as implants (external fixator

and biodegradable)

Designed, fabricated and erected pilot plant for Polymer productions (Fully Automated)

Designing of plants for chemical production and recycling.

Designed and erected Pervaporation pilot plant for membrane separation studies

(Officially project comprises of one-year duration but plant is designed, fabricated and

erected just in 5 months.)

Commissioned lab scale extruder and molding machines and Installation of

polymer/materials state of the art characterization instruments.

Administrative working and Project Management

Project Management comprising of building total infrastructure comprising civil works,

imports, purchases, administration, accounts handling, budget allocations, amount

distributions and instrument and plant installations

Estimation of cost of material and determine financial resource allocation.

Coordination with finance department for getting required amounts sanctioned on priority

Management of international tenders for purchase of instruments

Bids evaluation & ensure indenting of material & equipment as per specifications and cost

budgets

Liaise with technical evaluation committee for technical and commercial evaluation of

bids and consequently ensure delivery of material as per specifications and in line with

delivery schedules


Procedure Optimization and Resource development

PROFESSIONAL HISTORY at MASOOD PLASTICS PAKISTAN

Production Manager Dec 2005 – March 2007

Production management of PE, PP, HDPE and LDPE films for printing and packaging

industry by extruders

Ensure time production as per requirement of clients

Inventory control and maintenance of machinery during operation and as per scheduled

on annual basis

PROFESSIONAL HISTORY at ITTEHAD CHEMICALS PAKISTAN

Trainee Engineer Jan 2005 - Nov 2005

Caustic soda production by electrolysis of brine with mercury.

Set voltages of the electrolytic cells to save power consumption.

High production rate achieved by process control, waste management and in time

maintenance.

PROFESSIONAL HISTORY at WAH NOBEL GROUP OF INDUSTRIES PAKISTAN

Management Trainee Dec 2003 – Dec 2004

Submission of complete report of all the units

Ensured timely production of products in compliance with applicable Quality

Management System through team work, people management and leadership

Ethyl Acetate, Butyl Acetate, Acetaldehyde, Acetic Acid continues, DCS production plants

Formaldehyde, Urea Formaldehyde Concentrate continues DCS production plants

Batch production of Synthetic Resins Urea Formaldehyde, Phenol Formaldehyde

PROFESSIONAL HISTORY at AZIZIA INTERNATIONAL PAKISTAN

Quality Assurance Manager July 2003 – Nov 2003

Team leader for quality assurance and material checking of surgical instruments

Monitoring and controlling of parameters of cleaning processes using trichloroethylene or

methanol.

PUBLICATIONS

TOTAL IMPACT FACTOR = 65.543

NUMBER OF CITATIONS = 121

h-INDEX = 6

i10-INDEX = 4


1. Co-concentration effect of silane with natural extract on biodegradable polymeric films for

food packaging; Anbreen Bashir, Sehrish Jabeen, Nafisa Gull, Atif Islam, Misbah Sultan, Abdul

Ghaffar, Shahzad Maqsood Khan, Sadia Sagar Iqbal and Tahir Jamil. International Journal of

Biological Macromolecules. (2017) I.F 3.671

2. Enhanced mechanical properties of wood ash and fly ash as supplementary cementitious

materials; Zaib Hussain, Rohama Maqsood, Muhammad Imran Din, Shahzad Maqsood Khan,

Akhtar Shahnaz, Mohsin Rashid & Saba Ameen; Advances in Applied Ceramics Structural,

Functional and Bioceramics. 116: 7, 355-361 (2017) I.F 1.346.

3. Development and performance characteristics of silane cross linked poly (vinyl

alcohol)/chitosan membranes for reverse osmosis. Muhammad Shafiq, Aneela Sabir, Atif

Islam, Shahzad Maqsood Khan, Syed Nadir Hussain; Muhammad Taqi Zahid Butt; Tahir Jamil;

Journal of Industrial and Engineering Chemistry 48: 99-107 (2017) I.F=4.421

4. Integrally skinned nano-cellular crosslinked asymmetric thin films infused with PEO-PPO-PEO

block copolymer/ZnO-NPs for desalination using sea salt. Aneela Sabir, Wail Falath, Karl I

Jacob, Muhammad Shafiq, Nafisa Gull, Atif Islam, Muhammad Azeem Munawar, Saba Zia,

Shahzad Maqsood Khan, Amir Shafeeq, Muhammad Taqi Zahid Butt, Tahir Jamil. “Materials

Chemistry and Physics, 183: 595-605 (2016) I.F. = 2.283.

5. Fabrication and Performance Characteristics of Tough Hydrogel Scaffolds based on

Biocompatible Polymers. Atif Islam, Tariq Yasin, Nafisa Gull, Shahzad Maqsood Khan, Aneela

Sabir, Muhammad A Munawar, Muhammad Shafiq, Tahir Jamil, Muhammad H Raza.

International Journal of Biological Macromolecules 92: 1-10 (2016) I.F 3.657.

6. Mechanical, Thermal, and Microscopic Profile of Novel Glass Fiber-Reinforced Polyester

Composites as a Function of Barium Sulfate Loading. Farheen Anjum, Nafisa Gull, Shahzad

Maqsood Khan, Muhammad A. Munawar, Atif Islam, Sajid I. Niazi, Saba Zia, Muhammad

Shafiq, Muhammad Taqi Zahid Butt and Tahir Jamil. Advances in Polymer Technology DOI:

http://dx.doi.org/10.1590/1516-1439.043715 (2016) I.F 1.389.

7. Novel Green Nano Composites films fabricated by Indigenously Synthesized Graphene

Oxide and Chitosan. Younas H Khan, Atif Islam, Afsheen Sarwar, Nafisa Gull, Shahzad

Maqsood Khan, Muhammad A Munawar, Saba Zia, Aneela Sabir, Muhammad Shafiq and

Tahir Jamil. Carbohydrate Polymers 146: 131-138 (2016) I.F 5.130.

8. Fabrication and characterization of novel zirconia filled glass fiber reinforced polyester

(GFRP) hybrid composites. Muhammad Azeem Munawar, Shahzad Maqsood Khan, Nafisa

Gull, Muhammad Shafiq, Atif Islam, Saba Zia, Aneela Sabir, Awaise Ghouri, Muhammad Taqi

Zahid Butt, Tahir Jamil. Journal of Applied Polymer Science 43615: 1-9 (2016) I.F 1.727.

http://dx.doi.org/10.1016/j.matchemphys.2016.09.022

http://dx.doi.org/10.1590/1516-1439.043715


9. Polyphenylene sulphide/carbon fiber composites: study on their thermal, mechanical and

microscopic properties. Shahzad Maqsood Khan, Nafisa Gull, Muhammad Azeem Munawar,

Saba Zia, Farheen Anjum, Muhammad Sajid Iqbal, Muhammad Shafiq, Atif Islam,

Muhammad Arif Butt, Muhammad Taqi Zahid Butt and Tahir Jamil. Iranian Polymer Journal

25: 475-485 (2016) I.F 1.543.

10. 2D Carbon Fiber Reinforced High Density Polyethylene Multi-layered Laminated Composite

Panels: Structural, Mechanical, Thermal and Morphological Profile Shahzad Maqsood Khan,

Nafisa Gull, Muhammad Azeem Munawar, Atif Islam, Saba Zia, Muhammad Shafiq, Aneela

Sabir, Syed Muhammad Awais, Muhammad Arif Butt, Muhammad Taqi Zahid Butt and Tahir

Jamil. Journal of Material Science & Technology 32: 1077-1082 (2016) I.F 2.686.

11. Effect of different oxidants on polyaniline/single walled carbon nanotubes composites

synthesized via ultrasonically initiated in-situ chemical polymerization. Nafisa Gull, Shahzad

Maqsood Khan, Atif Islam, Saba Zia, Muhammad Shafiq, Aneela Sabir, Muhammad Azeem

Munawar, Muhammad Taqi Zahid Butt, Tahir Jamil; Materials Chemistry and Physics 172, 39-

46, (2016) I.F 2.283.

12. Evaluation of selected properties of biocompatible chitosan/poly (vinyl alcohol) blends. Atif

Islam, Tariq Yasin, Nafisa Gull, Shahzad Maqsood Khan, Muhammad Azeem Munawar,

Muhammad Shafiq, Aneela Sabir, Tahir Jamil. International Journal of Biological

Macromolecules 82, 551-556, (2016) I.F 3.657.

13. Impedance spectroscopy of chitosan/poly (vinyl alcohol) film, Atif Islam, Tariq Yasin, M. J.

Akhtar, Zahid Imran, Aneela Sabir, Misbah Sultan, Shahzad Maqsood Khan, Tahir Jamil.

Journal of Solid State Electrochemistry 20, 571-578 (2016) I.F 2.316.

14. Synthesis, characterization and permeation performance of cellulose acetate/polyethylene

glycol 600 membranes loaded with silver particles for ultra-low pressure reverse osmosis.

Sabad-e-Gul, Sidra Waheed, Adnan Ahmad, Shahzad Maqsood Khan, Muhammad Hussain,

Tahir Jamil, Muhammad Zuber. Journal of Taiwan Institute of Chemical Engineers. 57, 129-138

(2015) I.F 4.217.

15. An investigation of AC impedance and dielectric spectroscopic properties of conducting

chitosan-silane crosslinked-poly (vinyl alcohol) blended films, Atif Islam, Zahid Imran, Tariq

Yasin, Nafisa Gull, Shahzad Maqsood Khan, Muhammad Shafiq, Aneela Sabir, Muhammad

Azeem Munawar, Hafiz Muhammad Raza, Tahir Jamil. Materials Research (2015) I.F 0.844.

16. In-situ Cross Linked Nanofiber Mats of Chitosan/Poly (vinyl alcohol) Blend: Fabrication,

Characterization and MTT Assay with Cancerous Bone Cells, Atif Islam, Tariq Yasin, M. A.

Rafiq, Tahir H. Shah, Aneela Sabir, Shahzad Maqsood Khan, Tahir Jamil. Fibers and Polymers

16 (9), 1853-1860 (2015) I.F 1.211.


17. High-temperature electrical properties of silane cross-linked chitosan/poly (vinyl alcohol)

membrane: thermal, mechanical and surface characterization, Atif Islam, Tariq Yasin,

Aneela Sabir, Shahzad Maqsood Khan, Misbah Sultan, Muhammad Shafiq, AU Khan, Tahir

Jamil. e-Polymers 15 (4), 255–261 (2015) I.F 0.949.

18. Synthesis and characterization of zinc oxide (ZnO) filled glass fiber reinforced polyester

composites Nafisa Gull, Shahzad Maqsood Khan, Muhammad Azeem Munawar,

Muhammad Shafiq, Farheen Anjum, Muhammad Taqi Zahid Butt, Tahir Jamil. Materials and

Design. 67, 313–317 (2015) I.F 4.498.

19. Effect of silica on the properties of cellulose acetate/polyethylene glycol membranes for

reverse osmosis Adnan Ahmad, Sidra Waheed, Shahzad Maqsood Khan, Sabad-e-Gul,

Muhammad Shafiq, Muhammad Farooq, Khairuddin Sanaullah and Tahir Jamil. Desalination

Vol 355, pp 1–10, (2015) I.F 5.905.

20. Synthesis, characterization, permeation and antibacterial properties of cellulose

acetate/polyethylene glycol membranes modified with chitosan, Sidra Waheed, Adnan

Ahmad, Shahzad Maqsood Khan, Sabad-e- Gul, Tahir Jamil. Atif Islam, Tousif Hussain.

Desalination 351, 59–69, (2014) I.F 5.905.

21. Influence of Polyethylene Glycol 600 on Cellulose Acetate Membranes for Reverse Osmosis

Desalination. Aneela Sabir, M. Shafiq, Atif Islam, Shahzad Maqsood Khan, Tahir Jamil1, M.

Taqi Zahid, Amir Shafeeq, Arslan Shehzad, Arshad S. Bhatti, Younas Habib, Saba Behzad, and

Sarwat Jabeen. Polymer Research Journal. 9 (2) 291-302 (2015).

22. Polymer Fiber Composites; A prodigious breakthrough in Medical Arena. Article submitted in

Pakistan Plastic Manufacturing Association (PAK PLAS) Engr. Shahzad Maqsood Khan (2015).

23. Chemistry in Every Day Use. Participated in article writing for Dunicllif Chemical Society

(2015).

24. Synthesis and Characterization of Flexible and Rigid Polyurethane Foam, Shoaib Suleman,

Shahzad Maqsood Khan, Tahir Jamil, Waqas Aleem, Muhammad Shafiq, Nafisa Gull, Asian

Journal of Applied Sciences. 2(5) (2014).

25. Synthesis and Characterization of Visco-Elastic (VE) Polyurethane Foam, Shoaib Suleman,

Shahzad Maqsood Khan, Nafisa Gull, Waqas Aleem, Muhammad Shafiq, and Tahir Jamil1;

International Journal of Innovation and Applied Studies 9 (4)1878-1886, (2014) SJIF 3.50.

26. A Comprehensive Short Review on Polyurethane Foam; Shoaib Suleman, Shahzad Maqsood

Khan, Nafisa Gull, Waqas Aleem, Muhammad Shafiq, and Tahir Jamil; International Journal

of Innovation and Scientific Research, 12, 165-169 (2014) SJIF 3.50.


27. Polymers: A prodigious Revolution in Medical Arena, Shahzad Maqsood Khan, Saba Zia, Prof.

Dr. Muhammad Taqi Zahid Butt, Prof. Dr. Tahir Jamil, Pakistan Plastic Manufacturers

Association (PAK PLAS) 91-93 (2014).

28. A Study On Synthesis and Testing of Polyols Using Soybean Oil and Castor Oil; Shahzad

Maqsood Khan, Nafisa Gull, Muhammad Yaseen Akram, Hakim Ali Haider, Muhammad Yasir

Akram, Muhammad Imran, Muhammad Taqi Zahid Butt and Tahir Jamil, ASEAN Journal of

Chemical Engineering 13 (2) 27-38 (2013).

29. Dehydration of Industrial Ethanol by Pervaporation; Shahzad Maqsood Khan, Muhammad

Usman, Nafisa Gull, Muhammad Taqi Zahid Butt, Tahir Jamil. Journal of Quality and

Technology Management (JIQTM) IX (II) 163-170 (2013) Category X.

30. An Overview on Pervaporation (An Advanced Separation Technique); Shahzad Maqsood

Khan, Muhammad Usman, Nafisa Gull, Muhammad Taqi Zahid Butt, Tahir Jamil. Journal of

Quality and Technology Management (JIQTM) IX (1) 155-161 (2013) Category X.

31. Effect of additives on the properties and performance of cellulose acetate derivative

membranes in the separation of isopropanol/water mixtures; Muhammad Zafar, Muddassir

Ali, Shahzad Maqsood Khan, Tahir Jamil, Muhammad Taqi Zahid Butt, Desalination, 285 359–

365 (2012) I.F 5.905.

32. A Study on Synthesis and Testing of Polymer Modified Concrete; Shahzad Maqsood Khan,

Khurram Javed, Muhammad Taqi Zahid Butt, and Tahir Jamil, Engineering News, A Quarterly

journal of the Pakistan Engineering Congress (PECC) 44 (5-6) 55-63 (2012).

33. Synthesis and Characterization of Polyacrylonitrile Copolymers, Waqar Ahmad, Shahzad

Maqsood Khan, Muhammad Arif Butt and Tahir Jamil, Journal of Pakistan Institute of

Chemical Engineers (JPICHE) XXXVII, 61-67 (2009).

34. Synthesis, Properties and Characterization of rubber Latices; A Review, Shahzad Maqsood

Khan, Arshad Chughtai, Abdul Sattar, Muhammad Arif Butt and Tahir Jamil Journal of

Pakistan Institute of Chemical Engineers (JPICHE) XXXVI, 9-16 (2008) Y Category.

35. Determination of Solubility Parameter of Latices. Shahzad Maqsood Khan and Prof. Dr. Tahir

Jamil, Journal of Pakistan Institute of Chemical Engineers (JPICHE) XXXVI, 17-34 (2008) Y

Category.

CHAPTERS IN INTERNATIONAL BOOKS

1. Nafisa Gull, Shahzad Maqsood khan, Atif Islam, Tahir Jamil, Muhammad Taqi Zahid Butt

Book title “Polyaniline Blends, Composites, and Nanocomposites” 3rd Chapter title

“Modification of Polyaniline”, Hard Cover ISBN 9780128095515 Elsevier.


2. Nafisa Gull, Shahzad Maqsood Khan, Atif Islam, Muhammad Taqi Zahid Butt. Book title “Bio

Monomoers for Green Polymeric Composite Materials” Chapter title “Hydrogels used for

biomedical applications” John Wiley & Sons, Ltd (submitted)

3. Nafisa Gull, Shahzad Maqsood Khan, Muhammad Taqi Zahid Butt. Book title

“Polyvinylchloride (PVC) based blends: Preparation, characterization and Applications”

Chapter title “Polyvinylchloride (PVC): Structure and properties relationship” Springer

Germany (Write up in progress)

PAPERS REVIEWED FOR INTERNATIONAL JOURNALS

1. Effect of functionalized metal oxides addition on the thermal stability and weathering

behavior of polyester/Jute Composites in Polymer Science and Technology

2. Conformational space analysis of polyalanines using a genetic algorithm and calculation of

their acidities in the gas phase

3. Experimental Study on Dynamic Elastic Moduli and R-wave Velocities of Epoxy Mortars under

Different Temperatures

4. Investigation on Solubility of Hydroxy dibasic acids in alcohol amine solutions

5. Effect of functionalized metal oxides addition on the thermal stability and weathering

behavior of polyester/Jute Composites in Engineering Science and Technology, an

International Journal

6. Properties of Bagasse fibers grafted with Maleic Anhydride by a solid-state method in

Advances in Polymer Technology

7. Experimental Study on Dynamic Elastic Moduli and R-wave Velocities of Epoxy Mortars under

Different Temperatures CSME 2017

8. Investigation on Solubility of Hydroxy Dibasic Acid in Alcohol Amine Solutions CSME 2017

9. Novel Polyurethane Rigid Foam/ Organically Modified Iron Oxide Nanocomposites in

Polymer Composites

10. Synergistic effects of zinc oxide in montmorillonite flame retardant PS composites in Journal

of Applied Polymer Science

11. Combined effect of reinforcement and chemical Treatments on the vibrational behaviours

of Unsaturated polyester composite beams in Advances in Polymer Technology

12. A novel method to enhance the productivity of FRPs of Polymer Composites

PRESENTATIONS

1. Presented Technical Presentation in Conference Recent Advances in Chemistry-2017 Recent

Advancements in Chemical Trends; R&D and Production in University of Lahore (UoL) Lahore

Pakistan May 13-14 2017


2. Presented Technical Presentation in Conference of Orthopedic Association of Saarc

Countries (OASAC) 2017 “Fiber Reinforced Polymer Composites for Orthopedic Applications”

in PC Lahore April 07-09 2017

3. Presented Technical Presentation in Invention to Innovation Summit 2017 in Session of PIDE on

topic Polymers for Biomaterial applications in Punjab University Lahore March 08-09 2017

4. Presented Technical Presentation in National Seminar on Engineering Materials & Their

Performances-2013 jointly organized by College of Engineering & Emerging Technologies

(CEET) PU Lhr, Pakistan Institute of Metallurgy & Material Engineers (PIMME) and Material

Chapter Punjab University (MCPU) on “Synthesis and Characterization of Polyacrylonitrile

(PAN)” in PU Lhr. April 30, 2013

5. Presented Technical Presentation in 4th International Conference on Textile and Clothing

(ICTC 2013) on the theme of Sustainable Products on Textile Exports jointly organized by

Society of Dyes and Colorists (SDC), The Textile institute Lahore, School of Textile & Design

(SDT) of University of Management and Technology (UMT) Lahore on “Synthesis and

Characterization of Polyacrylonitrile (PAN) for Carbon Fiber” in Lahore Expo Center.

March 28-30, 2013

6. Presented Paper in 4th Symposium on Engineering Sciences on Dehydration of Aqueous

Ethanol Using Cellulose Acetate Membranes in Pervaporation Process (ICET PU LHR) Best

Presenter Award March 01, 2011

7. Presented Paper in 1st Symposium on Engineering Sciences on “Synthesis, Properties and

Characterization of rubber Latices; A Review” (ICET PU LHR) April 30, 2009

8. Presented Paper in 1st Symposium on Engineering Sciences on “Determination of Solubility

Parameter of Latices” (ICET PU LHR) April 30, 2009

9. Project management presentations in HEC funded projects in Planning and Commission

meetings in Islamabad

10. Presentations in of projects on successful project completion in inaugurations and in

different forums for HEC funded projects in Department of Polymer Engineering and

Technology University of the Punjab Pakistan Lahore representing as a focal person from

university for the projects.

AWARDS

1. Nominated for Research Incentive Award Punjab University Lahore for the year 2017 for

research publication May 2017

2. Won Chemistry Technology Award of cash prize of Rs 20000 in Invention to Innovation Summit

2017 Punjab University Lahore March 08-09 2017


3. Quaid-e-Azam Gold Medal Award by Tehreek-e-Istehkam-e-Pakistan Council (REGD)

Pakistan January 27, 2015

4. Nominated for Research Incentive Award Punjab University Lahore for the year 2013 for

research publication

POSTER PRESENTATION

1. An Investigation of Rheological Behaviour of Lubricating Oils Used for Motor Bike Engines. S.

M. Khan, S. Zia, S. Bano, N. Gull, A. Islam, S. S. Iqbal, M. Abid, S. Jabeen, M. T. Z. Butt, T.

Jamil. International Symposium on Advanced Materials (ISAM) 2017

2. Effect of Graphene for Ablation Study of Advanced Composite Materials for Aerospace

Applications. S.S.Iqbal, A.Sabir, A.Islam, S.M.Khan, M.Yasir, T.Jamil, Z.M.Khan. International

Symposium on Advanced Materials (ISAM) 2017

3. Ablation, Thermal Stability/Transportation/Phase Transition Study of Carbon NanoFiber

Reinforced Elastomeric Nanocomposites. Sadia Sagar Iqbal, Fawad Inam, Shahzad

Maqsood Khan, Atif Islam, Aneela Sabir, Arshad Bashir, Tahir Jamil, Mohammad Bilal Khan,

Zaffar M Khan. Accepted for Poster Presentation in JTACC 2017

PROFESSIONAL TRAININGS & SEMINARS

FOREIGN TRAININGS

1. Theory and Application Training Course of Q600 SDT, Q200 DSC & AR 1500 EX Rheometer

(TA Instruments; Houston, Woodland USA) Aug 2009

2. Theory, Application and Hands on Working Training Course of Q400 TMA, DMA & MDSC (TA

Instruments; Delaware USA) Aug 2009

LOCAL TRAININGS & SEMINARS

3. 2 Days Workshop on “Patent Filing and Introduction to Intellectual Property System of

Pakistan” Khorana Hall, Institute of Chemistry PU Lhr May 17-18 2017

4. Participated in world IPO day Marriot Hotel Islamabad May 2017

5. Participated as Organizer in 6th Invention to Innovation Summit 2017 in Session of PIDE on

topic Polymers for Biomaterial applications in University of the Punjab Lahore

March 08-09 2017

6. Attended Seminar on World Quality Day University of the Punjab Lahore

February 08 2017

7. 6th Symposium in Engineering Sciences University of the Punjab and University of Engineering

& Technology Lahore Dec 21-22, 2016

8. Workshop on Entrepreneurship, Use of Business Intelligence for Development Institute of

Chemical Engineering & Technology (ICET) University of the Punjab Lahore Nov 8, 2016


9. 4th One Week In-Service Faculty Training Program, Department of Microbiology and

Molecular Genetics (MMG), University of the Punjab Lahore Nov 21-25, 2016

10. Article Writing “Chemistry in Every Day Life” Dunnicliff Chemical Society, GCU Lhr

March 2015

11. 25th National and 13th International Chemistry Conference, Institute of Chemistry PU Lhr

Oct 20-22, 2014

12. 5th Symposium on Engineering Sciences ICET PU Lhr April 2nd, 2014

13. Chromatography Techniques & Sample Preparation Seminar Agilent Technologies

Jan 23, 2014

14. Short course on porous carbon materials & polymer fiber composites Pakistan Institute of

Engineering & Applied Sciences (PIEAS) Department of Nuclear Engineering

May 28-30, 2013

15. 2nd In Service Faculty Training program at University of the Punjab, for the core modules:

professional Ethics, Management & Grooming: Assessment a& Evaluation; Department of

Microbiology and Molecular Genetics in collaboration with Learning Innovation Division HEC

Pakistan Feb 4-8, 2013

16. 3rd International Symposium on Biomedical Materials: Recent Advances and Challenges.

Interdisciplinary Research Center in Biomedical Materials, CIIT Lahore King Edward Medical

University & De’montmorency College of Dentistry Dec 18-20, 2012

17. Corrosion and Corrosion Control Symposium (SOCEP-CEET PU LHR) Oct 27, 2011

18. Enhancing Quality and Productivity through Testing (TET PU LHR) March 9-10, 2011

19. Non-Destructive Testing Equipments (Sumico LHR) Feb 26, 2011

20. Non-Destructive Weldment Evaluation and its Remedies. (MME PU LHR)

Dec 13-14, 2010

21. Plastic Injection molding (PITAC LHR & SCCI SKT) Nov 1, 2010

22. HAZOP Study for Process Industries (ICET PU LHR) Aug 10, 2010

23. Implementation of ISO 17025 for QA in Testing and Research Labs (ICET PU LHR)

Aug 7 – 8, 2010

24. Storage Tank Designing (NIDA LHR) July 26 - Aug 6, 2010

25. Energy Conservation and Sustainability (ICET PU LHR) Aug 6, 2010

26. Heat Exchanger Design and Rating Using CHEMCAD (ICET PU LHR) Aug 3, 2010

27. Basic Steady State Simulation Using CHEMCAD (ICET PU LHR) Aug 2, 2010

28. Implementation of QMS (ISO 9001:2008) in Process Industries (ICET PU LHR)

July 31 – Aug 1, 2010

29. Process Integration and Intensification (ICET PU LHR) July 28-29, 2010


30. Piping Design, Layout & Stress Analysis (NIDA LHR) June 28 – July 9, 2010

31. Project Planning and Scheduling; P-6 (CCPEC LHR) May 24 – June 16, 2010

32. HVAC designing (NIDA LHR) May 3 – 14, 2010

33. Attended 3rd Symposium on Engineering Sciences (ICET PU LHR) March 10, 2010

34. Seminar on Scientific Writing & Publishing in High Impact Journals (KEMU LHR)

Feb 4 – 5, 2010

35. Operational and Installation Training of GPC (ICET PU LHR) May 18 – 22, 2009

36. Operational Instrumental Training of Q600 SDT, Q200 DSC, Q400 TMA and AR 1500 EX

Rheometer (ICET PU LHR) April 9 – 11, 2009

37. Selection of Stainless Steel for Surgical Instruments (SIMTEL SKT) Jan 14, 2009

38. Operational and Installation Training of FTIR (ICET PU LHR) Oct 25 – 28 2008

39. MATLAB Programming (ICET PU LHR) April 24 – June 28, 2008

40. Industrial Training (WAH NOBEL ACETATE WAH CANTT) July 5 – Aug 3, 2002

41. Advance AutoCAD (IGE PU LHR) Oct 15 – Nov 15, 2002

INSTRUMENTS

Got expertise and trainings in installations and operating of number of equipments including

1. Differential Scanning Calorimeter (DSC)

2. Thermo mechanical Analyzer (TMA)

3. Dynamic Mechanical Analyzer (DMA)

4. Simultaneous Differential Scanning Calorimeter Thermo Gravimetric Analyzer (SDT)

5. Rheometer

6. Fourier Transform Infra-Red Spectrophotometer (FTIR)

7. Gel Permeation Chromatograph (GPC)

8. Universal Testing Machine (UTM)

9. Rock Well Hardness Tester

10. Barcol Hardness Tester

11. Tubular Impact Tester

12. Pendulum Impact Tester

13. Wet Abrasion Scrub Tester

14. High Temperature Press

15. Lab Attritor

16. Lab Scale High Pressure Reactor

17. Gas Permeability Tester

18. Lab Scale Extruder

19. Paint Testing Equipments


PROFESSIONAL TOOLS AND SOFTWARES

1. Primavera Project Planner V-6.0

2. Microsoft Visio 2003, 2010

3. Microsoft Office

4. AutoCad

ENGINEERING PROJECTS

1. Involved in Designing of Large Scale Water Treatment Plants 2016

2. Designing and Fabrication of lab Scale Reactors and Treatment Units 2015-2016

3. Designing and Fabrication of High Pressure Lab Scale Pervaporation Plant 2014

4. Designing and Drafting of Caustic Soda Recycling Plant (Industrial Project) 2011

5. Designing of Lab Scale Dipped Goods Synthesis Plant 2010

6. Designing of Lab Scale Polymer Synthesis Pilot Plant 2009

7. Designing and fabrication of Lab Scale Pervaporation Plant 2008

THESIS SUPERVISED M. PHIL POLYMER TECHNOLOGY PET LHR

Sr.

No.

Student name Roll No Topic Session

1 Muhammad

Azeem

Munawar

MPE-02-

11

Particulate Filled Polyester Hybrid Composites 2011-

2013

2 Muhammad

Sajid Iqbal

Khan

MPE-03-

11

Processing and Characterization of TiO2 filled

Polyester-Glass Fiber Composites

2011-

2013

3 Ammad Yamin MPE-04-

11

Synthesis of Acrylic Polyol 2011-

2013

4 Nafisa Gull MPE-07-

11

Assessment of Thermal and Mechanical Properties of

ZnO Filled Glass Fiber Reinforced Polyester

Composites

2011-

2013

5 Munir Ahmad MPE-09-

11

Synthesis of Rigid Polyurethane Foam and Effect of

Filler on its Properties

2011-

2013

6 Muhammad

Basharat

Saeed

MPE-12-

11

A Study of Effect on Physicochemical Properties of

Acrylic Lattices by Varying Concentrations of Ionic

and Non-Ionic Emulsifiers in Continuous Emulsion Co-

Polymerization of Methyl Methacrylate and Butyl

Acrylate to produce on Stable Product

2011-

2013

7 Muhammad MPE-13- Synthesis of Rigid Polyurethane Foam and effect of 2011-


Sr.

No.


Shafiq 11 Silicon Surfactant on its Properties 2013

8 Adnan Ahmad MPE-19-

11

Cellulose Acetate and Polyethleneglycol-600 (PEG-

600) based Membranes Modified by Silica

2011-

2013

9 Sabad E Gul MPE-21-

11

Synthesis & Characterization of Cellulose Acetate

and PEG blended Membranes Impregnated with

Silver Nitrate

2011-

2013

10. Sidra Waheed MPE-29-

11

Synthesis and Characterization of 3-Component

Membranes for Water Treatment

2011-

2013

11 Farheen Anjum MPE-31-

11

Evaluation of Mechanical and Thermal Properties of

Barium Sulphate Filled Glass Fiber Reinforced

Polyester Composites

2011-

2013

12 Hina Saleem MPE-09-

12

Synthesis and characterization of Cellulose Acetate

Membrane with PEG 600 and 300 By Oven and

Freeze Drying Method

2012-

2014

13 Muhammad

Abid

MPE-11-

12

Synthesis and Characterization of Waterborne

Polyurethane Coatings with Hydrophilically modified

Aliphatic Polyisocyanate

2012-

2014

14 Saba Urooge

Khan

MPE-16-

12

Synthesis and Characterization of CA Membrane by

using PEG 300/600 by Freeze and Vacuum Dry

Method for the Application of Hemodialysis

2012-

2014

14 Ali Abbas MPE-18-

12

Synthesis and Characterization of Cellulose / Na-

CMC Hydrogel for Controlled Drug Delivery

Application

2012-

2014

15 Younas Habib

Khan

MPE-03-

13

Synthesis of Graphene Oxide and Fabrication of

Novel Graphene Oxide Green Nano Composite with

Chitosan

2013-

2015

16 Saba Zia MPE-05-

13

Synthesis and Characterization of Hydrogel for

Biomedical and Industrial Applications

2013-

2015

17 Muhammad

Omer Yasin

MPE-07-

13

Preparation and Characterization of Nano

hydroxyapatite (n-HA) Powder from Eggshells and n-

HA Reinforced Polyamide 6 Bio nanocomposite

2013-

2015

17 Saood Hamid MPE-09-

13

Preparation and Characterization of Nano

Hydroxyapatite Utilizing Hen’s Eggshells and nHa

Reinforced PP Composite as Bone Analogue

2013-

2015


Sr.

No.


biomaterial

19 Mohsin Farooq MPE-19-

13

Eva Functionalized Aero silica Doped Composites,

Thermal, Dynamic Mechanical and Insulation

Characteristics

2013-

2015

20 Syed Ghayour

Abbas

MPE-24-

13

Synthesis of Pervaporation Membranes for the

removal of 2-EHA from water steam during the

production of metal octoate

2013-

2015

21 Sajid Hussain MPE-19-

13

To Study the Blend of Low Density Poly Ethylene

(LDPE) And Ethylene Propylene Diene Monomer

(EPDM) Rubber

2014-

2016

22 Muhammad

Sajjad

MPE-09-

14

Development and Characterization of

Polypropylene (PP)/Ethylene Propylene Diene

Monomer (EPDM) Blend

2014-

2016

23 Muzaffar Ahsan MPE-14-

14

Preparation and Characterization of Low Density

Polyethylene (LDPE)/Recycled Polyethylene

Terephthalate (rPET) Blend

2014-

2016

24 Imran Shaikh MPE-18-

14

Tensile Properties Enhancement in PC/AbS Blends 2014-

2016

25 Ansa Khalid MPE-17-

14

Effect of Natural and Synthetic Fiber on Impact

Behaviour of Polyester and Epoxy Based Fiber

Reinforced Polymer Composites

2014-

2016

26 Amir Javed MPE-16-

14

To Study the Effect of Compatibilizer on Blending of

Polystyrene (PS) and Ethylene Propylene Diene

Monomer (EPDM) Rubber

2014-

2016

27 Muhammad

Arslan

Mahmood

MPE-23-

14

To Enhance Flame Retardancy of Flexible PVC by

Using Antimony Trioxide

2014-

2016

28 Muhammad

Talib Aleem

MPE-26-

14

Preparation and characterization of Thermoplastic

Elastomer Based on Polystyrene and Natural Rubber

Blend (PS/NR)

2014-

2016

29 Osama

Majeed Butt

(M.Sc IQTM)

MSIEM-

15-14

Development of economical dye sensitized solar

cell by characterization polymeric counter

electrodes

2015-

2017


RESEARCH PROJECTS & THESES (OTHER DEPARTMENTS)

1. Synthesis and Characterization of different polymers and copolymers (M.Sc Chemistry

Thesis PU Lhr)

2. Infra-Red Spectroscopic Studies of In Dental Binding Material Healed by LED and Halogen

Light In vitro Conditions (De’montmorency College of Dentistry Lhr M.Phil Project)

3. Production of Poly Acrylic Acid on Polymer Synthesis Pilot Plant

4. Separation of Alcohol Water System by Pervaporation (M.Sc Chemical Engineering ICET PU

Lhr)

5. Separation of Caustic Soda-Water system by RO Membrane (M.Sc Chemical Engineering

ICET PU Lhr)

6. Separation of Potassium Hydroxide-Water system by RO Membrane (M.Sc Chemical

Engineering ICET PU Lhr)

7. Separation of Ethanol-Water system by RO Membrane (M.Sc Chemical Engineering ICET PU

Lhr)

8. Synthesis and Characterization of Viscoelastic Polyurethane Foam (M.Sc Chemical


9. Dipped goods Production from Natural Latex (M.Sc Chemical Engineering ICET PU Lhr)

10. Synthesis of Polymer Composite for Targeted Drug Delivery Releases using Gelatin and

Glycolic Acid (D-Pharmacy PU Lhr)

11. Process Report on the Production of Polyol used for making Polyurethane Foams from

Soybean and Castor Oil (B.Sc Chemical Engineering ICET PU Lhr)

12. Process Report on the Formation of Polymer Modified Concrete (B.Sc Chemical


13. Plant design on Pervaporation Plant (B.Sc Chemical Engineering ICET PU Lhr)

14. Waste Water Treatment of Water Based Dyes (B.Sc Chemical Engineering ICET PU Lhr)

15. Manufacturing of Bullet Proof Jacket Composite using Fibers and PP (B.Sc Metallurgical

Engineering MME PU Lhr)

AFFILIATIONS

1. Pakistan Engineering Council (PEC) CHEM / 4818

2. Pakistan Engineering Congress (PECC) 4362

3. Pakistan Institute of Chemical Engineers (PICHE) A10033

4. Society of Corrosion Engineers Pakistan (SOCEP) M-105

5. Institute of Engineers Pakistan (IEP) M-17416 LHR-4733

6. The Chemical Society of Pakistan (CSP) P0435


PAST SELECTIONS

1. Assistant Professor (Permanent) BPS 19 at University of the Gujrat in 2010.

2. Lab Engineer/Lecturer at University of Engineering & Technology Lahore Faisalabad

Campus in 2009.

3. Chemical Engineer at Cleaner Production Center Sialkot in 2008.

4. Consultant Chemical Engineer at Punjab Seed Corporation of Pakistan in 2007.

REFERENCES

Will be provided on demand

PERSONAL DETAILS

Permanent Address House # 30 Street # 1 Block G, Fazaia Housing Society

Phase 1 near Adda Plot, Raiwind Road Lahore

Telephone No’s +92-0300/0321/0331-7152120

Date of Birth 18th January 1981

dr. shahzad maqsood khan - pu.edu.pkpu.edu.pk/images/cv/15101196511402.pdf · and commissioning of...

Documents