NASIR MAHMOOD

Experiences: More than 9 year’s of professional working experience in Construction and maintenance of OIL&GAS, Petrochemical and GAS plants as a Draughtsman (Piping & Mechanical Equipments), Familiarization & understanding of Saudi aramco Engineering Standard & Procedures for Piping Drawings/ instrumentation systems awareness & Understanding of industry code Practices.

Adgas DAS ISLAND: Draughtsman Piping/Mechanical 15-SEP 2015 to 17-SEP 2016

Client: ABU DHABI GAS (LNG & OAG)   Company: Qatar Engineering and Construction Company LLC.

Responsibilities: working in Piping Isometric for MTO for TA. Preparation of IFC drawings from MTO drawings to Pre-Fabrication according to adgas standard and

procedures. According to site requirement preparation of Mechanical drawings, layout, site sketches, shutdown

village layouts, structural/supports, equipments and as well 3D drawings. Assist for Inch Dia Entry & Tabulation Plot SOW in layout. Co-ordinate work shop during Pre-fabrication. Assist Schedulers / QC during TA. Update As-built drawings according to site changes and submission to client.

SHAH GAS DEVELOPMENT: Draughtsman Piping/Mechanical

06-AUG 2012 to 03 MAR 2013 Client: SAIPEM   Company: Descon Engineering Ltd.

Responsibilities: worked in SPOOLGEN Pre-Fabrication Department in saipem site office SHAH GAS

DEVELOPMENT ABU DHABI

IGD-5 Process Plant Abu dhabi Draughtsman Piping/Mechanical

06-Nov 2011 to 12 JUL 2012 Client: GASCO  Company: Descon Engineering Ltd.

Responsibilities: I completed assignment of Underground GRE/GRV Piping Drawings. Shop drawings for spools,

Joint Marking, joints details, Cut lists with bill of material According to GASCO standard and Procedures.

Prepared of Piping spool details drawings in Gasco standards for site installation of METALIC and GRE Piping drawings above ground.

Preparation of revised spool drawings according to given material from client.

Mobile: +92-341-4601610, +92-336-2156285E-mail: mahmood_art2003@yahoo.com

Prepared the MTO’s for structural and piping support drawings which received from client. To prepare the spooling of piping with SpoolGen according to client’s given spooling procedures on

IDF files from client. Working on Piping Revise drawings according to overall daily welding/progress report Shop and

Field Joints and co-ordination with QA/QC department. Excellent experience to prepare 3D Model drawings according to site requirement JGC Approved

and Excellent performance of preparation of MOD:SD/001/024/09:REPLACEMENT of 7-E-107 3D Model drawing of replacement of sulphur condenser for ADGAS-TA-2011 Presentation.

Ability to Design section drawings of piping or general arrangement layout drawings of Mechanical, structure 2D and 3D as per requirement.

Well known to work on VENDOR manual drawings of Piping As-built and AMERON manual drawings according to client procedure.

ADGAS OFFSHORE OAG-1 Draughtsman (Piping/Mechanical)05-Apr-09 to 06-Aug-10

Client: ABU DHABI GAS

Company: (MEPI) Technip

Responsibilities: Updating the QA/QC records in TAKEOVERxp handover department MEPI Technip. Scan the

QA/QC Records and update in TAKEOVERxp. Ensure documents issuance to Company and sub contractor. File PCC Documentation to proper level. Upload punch list in TOxp Update Master punch list in TOxp File punch list Receive the QA/QC

Forms of each department. Check / update the system numbers and update in PCC OR Construction database as

required. Type on excel the Punch list. Update the progress in TOxp (Date of complition QA/QC Records).

Update the progress in TOxp (Date of complition punch list Records). Generate Check List Systems status in all disciplines.

LCWU Jhang Campus Instructor Industrial Design (BCID/BFA Hons) ART Department,

17-Sep 07 to 31-Mar 09Client: Lahore College for Women UniversityCampus: JHANG CAMPUS www.lcwu.edu.pk

Responsibilities: Classroom Lectures regarding Concept of drafting and designing. Manual drafting and different jobs to supported to art. Working in parabolic, hy parabola, cone, hexagonal, development, human eye view. Bird eye view as

well as working in first angles, second angle and third angles views. Rendering of different type of 3D modeling jobs in Auto CAD Files. Excellent communication skill and coordination with students to focus on design models and good

command on adobe foto shop computer lab. Introduction to drafting standard sheet setting and design of models.

Al-marai Draftsman (Piping Mechanical) 03-May-07 to 03-Sep-07

Al-Kherj KSA Client: Al-marai (Saudi diary Processing Plant CPP2).Contractor: Al-akhdood Construction CompanyCompany: APV British based company

Responsibilities:

As-built ISO GLYCOL CLADED Return and Flow Pipe lines for fans, cassettes and AHU’s isometric Drawings with material take off.

Preparation of isometric Drawings from Piping Plan Auto CAD drawings according to sabic hadeed standard and procedures.

As-built drawings of 6F08 & AHU50 CASSETTES AHU ISO-15 NB, AHU-ISO-20 NB AHU-ISO-25 NB, -ISO-40 NB & AHU-ISO-50 NB. Area - 4.1 to Area – 4.5 and Area – 4.7 & Area 4GC7. Submitted drawings according to al-marai standard and Procedure.

N.C.C Draftsman (Piping Mechanical) 14-Jun-05 to 03-Nov-06

Al-Jubail KSA Client: HADEED (Saudi Iron and steel company).Contractor: National Contracting CompanyProject: SVA N.C.C Company: National Contacting Company

Responsibilities: As-built drawings of Piping and steel structure of Furnas area (Natural Gas, Combustion air,

Compressed Air, Burners, Nitrogen and Hydraulic Pipelines) drawings. Preparation of isometric Drawings from Piping Plan Auto CAD drawings according to sabic

hadeed standard and procedures. As-built drawings of water- Station, Pump house, Cooling water station hydraulic- Room and

& sketches of overhead & boom cranes. Different type of site layouts of SVA Piping isometrics Drawings in Saudi iron and steel

company hadeed.

Feb- 05 to Jun-05 Draftsman Piping/Mechanical IWS (Inspection work Sheet)

Client: Saudi Aramco (Riyadh Oil Refinery)Project: Area A, B & DCompany: Saudi Aramco Engineering Division

Responsibilities: Appointed as a Piping design draughtsman. Working on IWS (Inspection work sheet)

maintenance and Fabrication of Piping in Riyadh Refinery in manual Drawings with material take off in Riyadh oil Refinery.

Preparation of Piping Manual As-built drawings and Piping detail drawing, Knowledge of creat ISOMETRIC bill of material for above mentioned areas according to Saudi aramco Applicable Standard- and Specifications.

Preparation of ISOMERIC Piping Detail drawings marking with spool wise and joint marking shop and field including different type of Pipe supports with Bill of material.

Update P&ID according to change of isometric drawings or replacement of line. Upgrade the drawings to change locations of fire equipments locations.

Involvement in site to Installation of piping and fitting of flanges, elbows and related pipe supports Large bore and small bore.

G.I.C Draftsman (Electrical/Mechanical) 09-Dec-04 to 31-Jan-05

Riyadh Industrial Estate KSA Client: Sabic TSL (Techanical Services Laboratory).Contractor: Gulf Industrial ComplexProject: Electrical Company: Sabic R & D

Responsibilities: Appointed as a CAD draughtsman Electro/Mechanical, Electrical lighting layout, Panel

layout, Power layout, Cable tray layouts in Auto CAD drawings according to sabic standard and procedures.

As-built drawings of Single Line Diagram layout, Panel Descriptions with electrical Legends As-built Drawings submitted to sabic R&D Riyadh Industrial Estate according to Saudi

sabic standards.

Jul- 04 to Oct-04 Draftsman Piping/Mechanical Piping As-built Red Line standard Job No.268 & 269

Client: Saudi Aramco (Uthmaniyah Gas Plant)Project: Upgrade Fire and Utility Water SystemCompany: Petcon / FAFCO

Responsibilities: Appointed as a Piping design draughtsman. Project Upgrade Fire and Utility water system

underground and above ground at UTHMANIYAH Gas Plant udaliyah. As-built RED LINE isometric & piping plan manual Drawings. Preparation of drawings with

material takes off. DELUGE VALVE Drawings comply with Saudi aramco’s IFC Drawings Applicable Standard- and Specifications.

Existing Fire water and Utility water piping to be I.C.L. (Internal cemented lines) at UTHMANIYAH gas plant.

The areas where my work involvement are CHILLDOWN, Area 24-03, 24-04.Product Surge & Refrigerant Make- Up (RMU) area 25-07, Utility area and SULFUR Area.

To Arrangement Fire Protection equipments (HR Hose Reel, PIV Post -Indicator Valve, FH Fire Hydrant, FM Fire Monitor Piping & generation of isometric with respect to requirements in plant.

Preparation of Piping SKID DETAILS, vertical CHLORINE STORAGE TANK (1.210m cap: 400 usg) Preparation of Piping Details Drawings in auto CAD. 3”, 4”, 6”, 8”, 10”, 12” & 20” inches Diameters Pipe- Lines in-situ fabricated and installed above mentioned Areas according to Saudi aramco’s standards and Specifications.

Jan- 03 to Apr-04 Draftsman Mechanical Errection / Fabrication

Client: Al-rehmat Traders Textile Processing UnitProject: Jarranwala Road, Khurrianwal, Faisalabad Pakistan.Company: Al-rehmat traders

Responsibilities: Errection & Foundation experience of Thermosole (Morrison), fully automatic Tensionless

calendar (changzhou), Drying range (Morrison), Tensionless Dryer (jiangzou), Bleaching Range, Mercerizing, Pressure jiggers, Sanforizing (don fang) machines.

During Errection of above mentioned machines I Prepared civil foundation drawings and Draw complete Layouts machines.

Installation drawings of machines and complete plan drawings according to requirements of client in Auto CAD 2000.

I performed as record keeper responsibilities to update Data and drawings of mechanical and civil discipline.

Preparation of Utility Drawings of Piping Plan and Isometric drawings like Steam, Pure water, Gas and caustic.

I also design piping isometric drawings of power house on same project.

Qualification/ Certifications:

1999 - 2002 Draftsman (Mechanical) Government Techanical Training Institute, Jhang sadar.

Apr, 2001 Authorized Autodesk Training Center (ESTC) Auto CAD 2000 Engineering Systems Training Center, Lahore.

Jul, 2001 Edge Systems International Edge Foundation Computer Course Lahore office.

Apr, 2004 Bentley Training Center (ESTC)Auto Plant 3.0 3D (Piping, Equipment & Isometric) Engineering Systems Training Center, Lahore.

International Cods & Standards:Well familiar with

ANSI Pressure Piping codes B31.1.0 AWS, ASTM Codes and Standards. Saudi Aramco Engineering Standards about PIPING/Welding. Piping isometric study/Piping & instrument diagram. Piping plan layout (PPL) as well as (UTI), (FPS), (FDN), (HYD) and P&ID. Sabic design procedure for piping and industry code and practices.

Computer Skill: Microsoft Office Word, Excel Edge Systems International Lahore. AutoCAD2000 Engineering Systems Lahore office. Auto Plant Engineering Systems Lahore office. Smart Plant Intergraph Spoolgen

Personal Information:DOB: 05-Feb 1974C.N.I.C: 33202-1432439-7Passport No: HC 0154392Date of Expiry: 08-Sep-2017Permanent Address: Malik House, Lane Opposite Faisal Mills Green Town Toba Road Jhang Sadar P.O Box

No.35200, Pakistan.

Hobbies and Interest: Explore International affairs & Reading Newspapers