drawer slides and drawer box runners

This page is intentionally left blank.

I.2.1V16.2

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Drawer Slides by SALICEHardware Options

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog.

I Futura Soft Close Undermount Drawer Slides

Length Extension Closing Type Max. Cabinet Depth - Inside

Min. Cabinet Depth - Inside WCI Item # Salice Item #

12" [305.0mm] Full Smove Soft Close 14⅜" [365.1mm] 1213/16" [325.4mm] 165427 A7555/305CP6

15" [381.0mm] Full Smove Soft Close 177/16" [442.9mm] 15⅞" [403.2mm] 166764 A7555/381CP6

18" [457.0mm] Full Smove Soft Close 20⅜" [517.5mm] 18⅞" [479.4mm] 160720 A7555/457CP6

21" [533.0mm] Full Smove Soft Close 23⅜" [593.7mm] 21⅞" [555.6mm] 160721 A7555/533CP6

Additional lengths available - 9" (229mm). Please contact our Customer Support Team for more information.

Front Locking Clips & Rear Mounting Brackets for Futura Drawer SlidesDescription WCI Item # Salice Item #

Front Locking Clips - Left & Right (pair). Also available installed; for this option see Front Locking Clips - Optional Installation Notes. 160722 A710.610


Rear Mounting Bracket (Socket) - Regular - 2" [50.8mm] wide, metal (pair)* 181004 AGSKXC5

Rear Mounting Bracket (Socket) - Narrow - 17/16" [36.5mm] wide, metal (pair)* 181005 AGSKXR5

* When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame.

Rear Mounting Bracket - Regular AGSKXC5 Rear Mounting Bracket - Narrow AGSKXR5NHH1 - Drawer Box Notching

Front Locking Clips (pair) - A710.610 Front Locking Clips (pair) - A750.010

Futura Soft Close Undermount Drawer Slides - A7555

Sold Separately

• Front locking clips required for drawer slides tofunction (sold separately).

• Rear mounting brackets optional depending onchosen installation method (sold separately).

A7555 with Front Clips & Rear Brakets (Sold Separately)

I.2.2V16.2.com

®® 99.7% American MadeC

Hardware OptionsDrawer Slides by SALICE


I

Ordering & Pricing Notes: Futura Soft Close Undermount Drawer SlidesOrdering Guidelines

1 Order Forms Please use Hardware Order Form (E•Z Form #13).Pricing

1 Pricing Please see Section I.1 of the Wholesale Pricing Catalog.

Drawer Box Options (Chapter H)1 Bottom Panel Inset A 13mm bottom panel inset is required.2 Drawer Box Notching Requires drawer box notching option NHH1.

Sizes / Dimensions1 Side Thickness Compatible with ½" [12.7mm] and ⅝" [15.9mm] drawer box side wall thicknesses only.2 Minimum Width Minimum inside drawer width of 8" [203.2mm] when using either version of front locking clips.

3 Drawer Box Depth Drawer box depth must match the slide length. ie: 12" [305.0mm], 15" [381.0mm], 18" [457.0mm], 21" [533.0mm].

Technical Notes: Futura Soft Close Undermount Drawer SlidesHardware Options (Chapter I)

1 Full Extension Smove soft close fully integrated in the runner.2 Load Capacity 75# Dynamic / 100# Static.

3 Locking Clips and Mounting Brackets

Front locking clips and rear mounting brackets must be ordered separately.Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips.

4 Adjustability(With Front Locking Clips)

Height adjustment (+3mm) with A710.610 Front Locking Clips. Compatible with all Futura slides.Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking Clips. Compatible with 2012 or later Futura slides.

5 Screws Sold Separately

Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3).Screws needed to attach front locking clips to drawer box are sold separately. • Four #6 x ⅝ FHP wood screws required per pair (see Section I.3).Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3).

6 Technical Information Please see www.saliceamerica.com for additional information and technical specifications.

Front Locking Clips - Optional Installation

1 InstallationThe Salice Front Locking Clips (A710.610 or A750.010) required for the Futura Soft Close and Futura Push Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 13mm bottom panel inset and also include the NHH1 Notch & Hook Hole Combination.

2 Availability Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes.

3 Other Front Locking Clips (Release Clips)

Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. If ordering Blum Drawer Slide Locking Devices (Release Clips) from Section I.9, you will need to order Blum Drawer Slides separately.Front locking clips (release clips) vary by manufacturer. WalzCraft can provide and install other brands upon request.The following information is required when ordering front locking clips (release clips) that are not invento-ried by WalzCraft: • Brand and Model # of the drawer slide being used. • Manufacturer’s Part # of the Front Locking Clips (Release Clips), if available.

I.2.3V16.2


Futura “Push” Undermount Drawer Slides

Length Extension Closing Type Max. Cabinet Depth - Inside

Min. Cabinet Depth - Inside WCI Item # Salice Item #

21" [533.0mm] Full Push 23⅜" [593.7mm] 21⅞" [555.6mm] 165444 A7557/533CP6

Additional lengths available - 12" (305mm), 15" (381mm), 18" (457mm). Please submit requests to our Customer Support Team.

Front Locking Clips & Rear Mounting Brackets for Futura Drawer SlidesDescription WCI Item # Salice Item #



Rear Mounting Bracket (Socket) - Regular - 2" [50.8mm] wide, metal (pair)* 181004 AGSKXC5

Rear Mounting Bracket (Socket) - Narrow - 17/16" [36.5mm] wide, metal (pair)* 181005 AGSKXR5

* When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame.



I

Futura “Push” Undermount Drawer Slides - A7557

Sold Separately

• Front locking clips required for drawer slides to function (sold separately).

• Rear mounting brackets optional depending on chosen installation method (sold separately).

Rear Mounting Bracket - Regular AGSKXC5 Rear Mounting Bracket - Narrow AGSKXR5NHH1 - Drawer Box Notching

Front Locking Clips (pair) - A710.610 Front Locking Clips (pair) - A750.010A7557 with Front Clips & Rear Brakets (Sold Separately)

I.2.4V16.2.com


Hardware OptionsDrawer Slides by SALICE


I

Ordering & Pricing Notes: Futura “Push” Undermount Drawer SlidesOrdering Guidelines




Sizes / Dimensions1 Side Thickness Compatible with ½" [12.7mm] and ⅝" [15.9mm] drawer box side wall thicknesses only.2 Minimum Width Minimum inside drawer width of 8" [203.2mm] when using either version of front locking clips.

3 Drawer Box Depth Drawer box depth must match the slide length. ie: 12" [305.0mm], 15" [381.0mm], 18" [457.0mm], 21" [533.0mm].

Technical Notes: Futura “Push” Undermount Drawer SlidesHardware Options (Chapter I)

1 “Push” Undermount Slides The new “Push” opening system for handle-less drawers is fully integrated in the runner. A slight “push” on the drawer front is sufficient for the drawer to self-open.

2 Full Extension Full extension runner.3 Load Capacity 75# Dynamic / 100# Static.

4 Locking Clips and Mounting Brackets

Front locking clips and rear mounting brackets must be ordered separately.Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips.

5 Adjustability(With Front Locking Clips)

Height adjustment (+3mm) with A710.610 Front Locking Clips. Compatible with all Futura slides.Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking Clips. Compatible with 2012 or later Futura slides.


Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3).Screws needed to attach front locking clips to drawer box are sold separately. • Four #6 x ⅝ FHP wood screws required per pair (see Section I.3).Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3).


Front Locking Clips - Optional Installation

1 InstallationThe Salice Front Locking Clips (A710.610 or A750.010) required for the Futura Soft Close and Futura Push Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 13mm bottom panel inset and also include the NHH1 Notch & Hook Hole Combination.

2 Availability Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes.

3 Other Front Locking Clips (Release Clips)

Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. If ordering Blum Drawer Slide Locking Devices (Release Clips) from Section I.9, you will need to order Blum Drawer Slides separately.Front locking clips (release clips) vary by manufacturer. WalzCraft can provide and install other brands upon request.The following information is required when ordering front locking clips (release clips) that are not invento-ried by WalzCraft: • Brand and Model # of the drawer slide being used. • Manufacturer’s Part # of the Front Locking Clips (Release Clips), if available.

I.2.5V16.2


Single Extension Epoxy Coated RunnersLength Extension Closing Type Color WCI Item # Salice Item #

18" [450.0mm] Single Self-Closing White 160715 A208/45.1



Additional lengths available - 12" [300.0mm], 14" [350.0mm], 16" [400.0mm], 24" [600.0mm]. Please submit requests to our Customer Support Team.

Rear Mounting Brackets for Single Extension RunnersDescription WCI Item # Salice Item #

Rear Mounting Bracket (Socket) for A208 drawer slide - Pair - Includes one left and one right bracket. 181006 ASO208NANDR/L

Ordering & Pricing Notes: Single Extension Epoxy Coated RunnersOrdering Guidelines



Drawer Box Options (Chapter H)1 Drawer Box Notching Single extension epoxy coated runners do not require any drawer box notching.

Sizes / Dimensions1 Side Thickness Compatible with all drawer box side wall thicknesses.

Technical Notes: Single Extension Epoxy Coated RunnersHardware Options (Chapter I)

1 Single Extension Single extension (3/4), white epoxy coated self closing drawer slides.2 Load Capacity 75# Dynamic / 100# Static.3 Rear Mounting Brackets Rear mounting brackets must be ordered separately.


Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3).Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3).




I

Single Extension Epoxy Coated Runners - A208

Sold Separately


I.4.1V16.2


Drawer Slides - Side MountHardware Options

I

Rear Mounting Brackets for Tru-Trac™ Drawer SlidesDescription WCI Item # Tru-Trac Item #

Rear Mounting Bracket - 27/16" [61.9mm] W x 1⅞" [47.6mm] H x 3½" [88.9mm] L, metal (pair) 181007 KVTT401

Tru-Trac™ 100 Series Side Mount Drawer SlidesLength Actual Length Extension Closing Type Color WCI Item # Tru-Trac Item #

18" 17¾" (450.0mm) Full Positive Stop Zinc 172207 KVTT100 B1820" 19¾" (500.0mm) Full Positive Stop Zinc 172208 KVTT100 B2022" 21¾" (550.0mm) Full Positive Stop Zinc 172209 KVTT100 B22

Additional lengths available - 10" [250.0mm], 12" [300.0mm], 14" [350.0mm], 16" [400.0mm], 24" [600.0mm], 26" [650.0mm], 28" [700.0mm]. Please contact our Customer Support Team for more information.

KNAPE & VOGT Technical Support (800) 253-1561

Tru-Trac™ 100 Series Side Mount Drawer Slide


‘Advice on Choosing The Correct Hardware for your Project’

• Making the right choices when selecting hardware is crucial to the success of most woodworking projects. The cabinet hardware (hinges, mounting plates, slides, etc.) shown in this catalog is very specialized in terms of how it will attach to components and cabinets, and how it will function in day to day use for years to come. Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.• Hardware is most easily and confidently chosen when you have used a specific piece of hardware before, and are totally familiar with how it functions, as well as how to properly install and adjust it. If you believe that a particular piece of hardware is what you need, but you have no experience with it, you should do a ‘trial mount’ using the hardware in the exact way you intend for your project.• WalzCraft offers a 30% discount on hardware used for trial mounting. The discount applies to the pieces you will need to mount 1 door or 1 drawer box. As an example, to trial mount one door you might need 2-hinges, 2-mounting plates, and the screws. All items needed for the trial mount are eligible for the 30% discount.• It is important to check Quotes, Order Acknowledgments and Order Price Acknowledgments for accuracy. Please double check all paperwork and help us get your order filled correctly the first time. Please note that WalzCraft paperwork includes the following ‘remind- er’ message: ◦ Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.• For technical support, please contact hardware manufacturers at the phone numbers or websites provided throughout Chapter I in our Product Specifications Catalog and our Wholesale Pricing Catalog.• WalzCraft will not be liable for replacement of manufactured product or hardware if found that it is not compatible.

I.4.2V16.2.com


Ordering & Pricing Notes: Tru-Trac™ Side Mount Drawer SlidesOrdering Guidelines



Drawer Box Options (Chapter H)1 Drawer Box Notching Does not require any drawer box notching.

Sizes / Dimensions1 Side Thickness Compatible with all drawer box side wall thicknesses.2 Side Clearance Industry standard side clearance: ½" [12.7mm] + 1/32 / -0".3 Slide Height Height: 125/32" [45.0mm].

Technical Notes: Tru-Trac™ Side Mount Drawer SlidesHardware Options (Chapter I)

1 Tru-Trac™ 100

A smart & economical choice for a 100# class, full extension ball-bearing slide solution. Features a non-handed design. Zinc Finish.Telescopic movement on steel ball-bearings, delivers a smooth operation. A positive stop bumper provides an anti-rebound feature. Lever disconnect for easy drawer removal.

2 Full Extension Full extension runner. 3 Side Mounting Side mounting for frame and frameless construction.4 Load Capacity Load Capacity: 100-pound class.

5 Rear Mounting Brackets

Rear mounting brackets for face frame installation must be ordered separately. Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3).Will fit left or right installation.Face Frame Mounting Holes.32mm and Traditional Hole Patterns.

6 Screws Included Screws needed to attach drawer slides to cabinet are included. • Comes with twelve #7x12P wood screws.

7 Technical Information Please contact Knape & Vogt at (800) 253-1561 for additional information and technical support.

Drawer Slides - Side Mount Hardware Options


I

I.9.1V16.2


TANDEM plus BLUMOTION Undermount Drawer Slides - 563H

DrawerLength Extension Closing Type

Maximum Cabinet Depth with Rear BracketRunner Length WCI

Item #Blum Item #Maximum Minimum

9" [229.0mm] Full BLUMOTION Soft Close 1125/32" (299.0mm) 1015/32" (266.0mm) 103/16" (259.0mm) 174009 563H2290B10

12" [305.0mm] Full BLUMOTION Soft Close 149/16" (370.0mm) 1229/32" (328.0mm) 129/16" (319.0mm) 174010 563H3050B




Undermount Drawer Slide Components NHH1 - Drawer Box Notching

Blum Technical Support: (800) 438-6788 www.blum.com

locking devices

slides / runners

rear mounting brackets(face frame only)

Hardware Options


I

TANDEM plus BLUMOTION Undermount Drawer Slides - 563H

Sold Separately

• Locking devices are required for drawer slides to function (sold separately).

• Rear mounting brackets are optional depending on chosen installation method (sold separately).

Drawer Slides by blum

I.9.2V16.2.com


Hardware OptionsDrawer Slides by blum

I

Ordering & Pricing Notes: TANDEM plus BLUMOTION Undermount Drawer SlidesOrdering Guidelines




Sizes / Dimensions1 Side Thickness 13mm (½") to 16mm (⅝") drawer box material thickness.

2 Minimum WidthMinimum inside drawer width of 611/16" [170.0mm] when using front locking clips T51.1901 L/R.Minimum inside drawer width of 3¾" [95.0mm] when using front locking clips T51.0801.20 L/R.

3 Slide Lengths Slides are available in 9" [229.0mm] to 21" [533.0mm] lengths in 3" [76.0mm] increments for face frame or panel (frameless) cabinets.

4 Drawer Box Depth Drawer box depth must match the slide length. ie: 9" [229.0mm], 12" [305.0mm], 15" [381.0mm], 18" [457.0mm], 21"[533.0mm]).

Technical Notes: TANDEM plus BLUMOTION Undermount Drawer SlidesHardware Options (Chapter I)

1 TANDEM / BLUMOTION Full extension, concealed drawer runners with BLUMOTION soft closing and TANDEM smooth running action.

2 Load Capacity 100 lbs. static load capacity.

3 Locking Devices &Mounting Brackets

Blum Undermount Drawer Slides are only compatible with Blum locking devices.Locking devices and rear brackets must be ordered separately.

4 Adjustability Four-Dimensional adjustment.Elongated holes for depth adjustment.


Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3).Screws needed to attach front locking clips to drawer box are sold separately. • Four #6 x ⅝ FHP wood screws required per pair (see Section I.3).Screws needed to attach rear mounting brackets to cabinet are sold separately. • Three #6 x ⅝ FHP wood screws required per bracket (see Section I.3).

6 Technical Information Please see www.blum.com or call Blum at (800) 438-6788 for additional information and technical support.

Locking Devices - Optional Installation

1 InstallationThe Blum Locking Devices (T51.1901 L/R or T51.0801.20 L/R) required for the TANDEM plus BLUMOTION Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 13mm bottom panel inset and also include the NHH1 Notch & Hook Hole Combination.

2 AvailabilityAvailable with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes.

3 Other Locking Devices (Release Clips)

Blum Undermount Drawer Slides are only compatible with Blum Locking Devices. If ordering Salice Drawer Slide Front Locking Clips (Release Clips) from Section I.2, you will need to order Salice Drawer Slides separately.Locking Devices (release clips) vary by manufacturer. WalzCraft can provide and install other brands upon request.The following information is required when ordering front Locking Devices (release clips) that are not inventoried by WalzCraft: • Brand and Model # of the drawer slide being used. • Manufacturer’s Part # of the Front Locking Clips (Release Clips), if available.


I.9.3V16.2


Hardware Options


I Blum Locking Device for Undermount Drawer Slides - Narrow (Limited Space) Drawer

1 Ordering Please use Hardware Order Form (E•Z Form #13). One right and one left required per drawer.

2 Pricing Please see Section I.1 of the Wholesale Pricing Catalog.3 Compatibility For use with 563 series runners only.4 Load Capacity Maximum dynamic load capacity 25 lb.

5 Installation Available installed on assembled melamine & pre-finished wood drawer boxes with NHH1 only.

6 Bottom Panel Inset Designed for ½" (13mm) drawer bottom recess.

7 Adjustability Height adjustment of +⅛" (3mm).Self-adjusting drawer length tolerance.

8 Screws Sold Separately Requires four #4 x ⅝" wood screws per pair (Section I.3).9 Materials Vertical mount, two-piece nylon.

10 Minimum SizeMinimum inside drawer width of 3¾" (95.0mm).Front of drawer box must be a minimum of ⅝" (16.0mm) thick.

WCI Item #177527

Rear Mounting Bracket for Undermount Drawer Slides (Face Frame Cabinet Only)

1 Ordering Please use Hardware Order Form (E•Z Form #13). Sold in pairs.


3 Compatibility

For use when installing TANDEM 563 series runners only, in face frame cabinets.Not for use with 9" [229.0mm] runners.Not necessary for frameless (panel) cabinet installation.

4 Adjustability Lateral self-alignment ⅛" (3.0mm).5 Screws Sold Separately Use at least three #6 wood screws per bracket (Section I.3).6 Materials Non-handed, one-piece stamped steel design, zinc-coated.

WCI Item #181008

Blum Locking Device for Undermount Drawer Slides

1 Ordering Please use Hardware Order Form (E•Z Form #13). One right and one left required per drawer.

2 Pricing Please see Section I.1 of the Wholesale Pricing Catalog.3 Compatibility For use with 563 series runners only.

4 Installation Available installed on assembled melamine & pre-finished wood drawer boxes with NHH1 only.

5 Self Aligning Captive right device and self aligning left device.

6 Adjustability Height adjustment of +⅛" [3.0mm].Side adjustment of +/-1/16" [1.5mm].Self-adjusting drawer length tolerance.

7 Screws Sold Separately Requires four #6 x ⅝" wood screws per pair (Section I.3).8 Materials Steel base with synthetic, spring loaded release levers.9 Minimum Size Minimum inside drawer width of 611/16" [170.0mm].

WCI Item #172566

Drawer Slides by blum

I.9.4V16.2.com


Hardware OptionsDrawer Slides by blum

I


TANDEM Template1 Ordering Please use Hardware Order Form (E•Z Form #13). One right and one left required per drawer.2 Pricing Please see Section I.1 of the Wholesale Pricing Catalog.

3 563 Series TANDEMRunners Essential tool for drawers using 563 series TANDEM runners.

4 6mm Diameter Holes Used to bore the 6MM diameter holes for rear hooks.5 2.5mm Diameter Holes Used to pre-bore the 2.5mm diameter holes for TANDEM locking devices at the required angle.6 Drill Bits Does not include drill bits.

TANDEM plus BLUMOTION Undermount Drawer Slide AccessoriesDescription WCI Item # Blum Item #

Front Locking Device - Left & Right (pair) 172566 T51.1901 L/RFront Locking Device - Narrow Drawer - Left & Right (pair) 177527 T51.0801.20 L/RRear Mounting Bracket - For Face Frame Cabinet (pair) 181008 295.3750.02TANDEM Template 174015 T65.1600.01

WCI Item #174015

‘Advice on Choosing The Correct Hardware for your Project’

• Making the right choices when selecting hardware is crucial to the success of most woodworking projects. The cabinet hardware (hinges, mounting plates, slides, etc.) shown in this catalog is very specialized in terms of how it will attach to components and cabinets, and how it will function in day to day use for years to come. Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is for you to order a sample of the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.• Hardware is most easily and confidently chosen when you have used a specific piece of hardware before, and are totally familiar with how it functions, as well as how to properly install and adjust it. If you believe that a particular piece of hardware is what you need, but you have no experience with it, you should do a ‘trial mount’ using the hardware in the exact way you intend for your project.• WalzCraft offers a 30% discount on hardware used for trial mounting. The discount applies to the pieces you will need to mount 1 door or 1 drawer box. As an example, to trial mount one door you might need 2-hinges, 2-mounting plates, and the screws. All items needed for the trial mount are eligible for the 30% discount.• It is important to check Quotes, Order Acknowledgments and Order Price Acknowledgments for accuracy. Please double check all paperwork and help us get your order filled correctly the first time. Please note that WalzCraft paperwork includes the following ‘remind- er’ message: ◦ Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.• For technical support, please contact hardware manufacturers at the phone numbers or website provided throughout Chapter I in our Product Specifications Catalog and our Wholesale Pricing Catalog.• WalzCraft will not be liable for replacement of manufactured product or hardware if found that it is not compatible.

drawer slides and drawer box runners

Documents

locking clips pair a750

locking clips pair a710

drawer width

drawer height

rear mounting brackets

metal pair

right pair

locking clipsheight