drawer systes - lincoln sentry · drawer systems drawers, hinges & assembly devices a.173a.2 a...
TRANSCRIPT
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.170
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
MOVENTO WITH BLUMOTION - 760H/766H
MOVENTO WITH BLUMOTION
• Concealed full extension with integrated BLUMOTION for silent and effortless closing action
• Synchronised feather-light glide • BLUMATIC self closing feature • Tool-free side, height, and tilt adjustment • Optional tool-free depth adjustment• Built-in width and depth tolerance compensation
Space Requirement
NL - Nominal Length
1. Runners Left/Right
Nominal Length Blum No Code Blum No Code270 760H2700B 1-225-270300 760H3000B 1-225-300350 760H3500B 1-225-350400 760H4000B 1-225-400450 760H4500B 1-225-450 766H4500B 1-225-456500 760H5000B 1-225-500 766H5000B 1-225-506550 760H5500B 1-225-550 766H5500B 1-225-556600 776H6000B 1-225-606
40kg 60kg
3. Locking Device with Side AdjustmentSide Blum No Code
Left T51.7601 - L 1-225-555Right T51.7601 - R 1-225-560
4. Depth AdjustmentMaterial Blum No Code
Nylon 298.7600 1-225-005
12. Side Stabilisation SetFor cutting to size, suitable for cabinet width KB 1400mm Cutting = Inner cabinet width LW - 295mm
Description Blum No CodeUp to 400NL ZS7.400MU 1-255-010Up to 600NL ZS7.600MU 1-255-012
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.171
A
Draw
ers, Hinges &
Assembly D
evices
Page Instructions
MOVENTO WITH BLUMOTION - 760H/766H
Planning
Space requirement in cabinet
• See cabinet profile fixing positions
Drawer/inner drawer
SKW Internal drawer width
LW Inner cabinet width
Drawer
SKL Drawer length
NL Nominal length
• Additional +12mm with side stabilisation
Inner drawer
ISKL Inner drawer length
SKL Drawer length
NL Nominal length
• Additional +3mm with depth adjustment
Cabinet profile screw positions
Cabinet profile screw positions
Cabinet profile screw positions
Cabinet profile 760H - 40kg
Drawer assembly
Use drilling template 1-285-691
Use drilling template 1-285-691
Note:
** Limited side adjustment for a drawer side panel thickness of 16mm.
Cabinet profile screw positions
Cabinet profile 766H - 60kg
250, 270
450
Nominal length NL (mm)
Nominal length NL (mm)
300-350
500-600
390-520
650-750
550, 600
Assembly, Removal & Adjustment A.176
SERVO-DRIVE for MOVENTO A.178
Assembly Devices D
Accessories A.174
Blum Warranty A.0
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.172
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
MOVENTO WITH TIP-ON - 760H/766H
MOVENTO WITH TIP-ON
• Concealed full extension with integrated TIP-ON, the mechanical opening support system
• Synchronised feather-light glide • BLUMATIC self closing feature • Tool-free side, height, and tilt adjustment • Optional tool-free depth adjustment• Built-in width and depth tolerance compensation• Compatible with side stabilisation for MOVENTO
Space Requirement
NL - Nominal Length
1. Runners Left/Right
Nominal Length Blum No Code Blum No Code270 760H2700T 1-225-271300 760H3000T 1-225-301350 760H3500T 1-225-351400 760H4000T 1-225-401450 760H4500T 1-225-451 766H4500T 1-225-457500 760H5000T 1-225-501 766H5000T 1-225-507550 760H5500T 1-225-551 766H5500T 1-225-557600 776H6000T 1-225-607
40kg 60kg
3. Locking Device with Side AdjustmentSide Blum No Code
Left T51.7601 - L 1-225-555Right T51.7601 - R 1-225-560
6b. TIP-ON Syncronisation pinion setMaterial Blum No Code
Nylon T57.7400 1-225-007
6c. TIP-ON Syncronisation LinkageMaterial Blum No Code
Aluminium ZST.1137W 1-255-009
Trigger rangeDrawer
Example for 760H, nominal length NL 500 mm, four sided drawer, with synchronisation
TIP-O
N
TIP-O
N
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.173
A
Draw
ers, Hinges &
Assembly D
evices
Page Instructions
MOVENTO WITH TIP-ON - 760H/766H
Planning
Space requirement in cabinet
• See cabinet profile fixing positions
Drawer/inner drawer
SKW Internal drawer width
LW Inner cabinet width
Drawer
SKL Drawer length
NL Nominal length
• Additional +12mm with side stabilisation
Inner drawer
ISKL Inner drawer length
SKL Drawer length
NL Nominal length
• Additional +3mm with depth adjustment
Cabinet profile screw positions
Cabinet profile screw positions
Cabinet profile screw positions
Cabinet profile 760H - 40kg
Drawer assembly
Use drilling template 1-285-691
Use drilling template 1-285-691
Note:
** Limited side adjustment for a drawer side panel thickness of 16mm.
Cabinet profile screw positions
Cabinet profile 766H - 60kg
250, 270
450
Nominal length NL (mm)
Nominal length NL (mm)
300-350
500-600
390-520
650-750
550, 600
Assembly, Removal & Adjustment A.176Assembly Devices D
Accessories A.174
Blum Warranty A.0
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.174
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
MOVENTO ACCESSORIES
Material Blum No CodeNylon - light grey 298.7600 1-225-005
Description Blum No CodeUp to 400NL ZS7.400MU 1-255-010Up to 600NL ZS7.600MU 1-255-012
DEPTH ADJUSTMENT
• Only for inset applications• Integrated SERVO-DRIVE bumper• Suitable for MOVENTO locking device
SIDE STABILISATION SET
• Can be combined with MOVENTO with BLUMOTION and MOVENTO with TIP-ON
• For cutting to size • Suitable for cabinet width KB 1400 mm
Assembly
Planning
75°
Depth adjustment ±2mmSpace requirement in cabinet
Space requirement in cabinet
• See cabinet profile fixing positions
Three sided drawerFour sided drawer
Drawer
SKL Drawer length
NL Nominal length
• Additional +12mm with side stabilisation
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.175
A
Draw
ers, Hinges &
Assembly D
evices
MOVENTO CABINET PROFILE FIXING POSITIONS
Cabinet profile 760H - 40 kg
Cabinet assembly
If you install runners before cabinet assembly, the fixing position must be increased by at least 1 mm from 38 to at least 39 mm due to tolerances in the runner and cabinet!
Cabinet profile 766H - 60 kg
Fixing onto cabinet
A Chipboard screws Ø 3.5 x 15 mm, part no. 609.1500 B Chipboard screws, part no. 661.1450.HG Extreme back fixing position ensures optimal stability
Fixing onto cabinet
A Chipboard screws Ø 3.5 x 15 mm, part no. 609.1500 B Chipboard screws, part no. 661.1450.HG Extreme back fixing position ensures optimal stability
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.176
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
MOVENTO - ASSEMBLY, REMOVAL & ADJUSTMENT
Drawer insertion and removal
Locking device
Adjustment
Adjustment
Limited side adjustment for a drawer
side panel thickness of 16 mm, but with
full tolerance utilisation of the internal
width of the drawer
Depth adjustment
With TIP-ON
- 1/+ 2 mm
Tilt adjustment
Side adjustment
Compensation via the right, back runner
Height adjustment
+ 3 mm
Side adjustment
Two-sided via locking device ± 1.5 mm
Depth adjustment
With depth adjustment 298.7600
± 2 mm
Insertion Removal
Inner drawerFour sided drawer Three sided drawer
The electric motion support system from Blum, SERVO-DRIVE, is mesmerisingly easy. Drawers open by themselves with a single touch and close again softly and effortlessly with BLUMOTION.
Combined with MOVENTO, motion is smooth and effortless. Low-friction nylon rollers in the roller carriage and the synchronisation of the drawer profile and roller carriage ensure synchronised, smooth running action. With MOVENTO the front can now be adjusted to the side and depth along with the height and tilt. Fast, easy and tool-free.
SERVO-DRIVE for MOVENTO Open with a single touch
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.178
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
SERVO-DRIVE FOR MOVENTO/TANDEM
STANDARD CABINET
• Electrical opening support system in conjunction with BLUMOTION – for silent and effortless closing action
• With vertical bracket profile • No fixed connection to the drive system • Pull-outs can be used unchanged• Tool-free assembly• Simple cabling• Shallow installation depth
2. Bracket ProfileLength Cable Blum No Code670mm With Z10T670AA 1-244-067750mm With Z10T750AA 1-244-075
1170mm Without Z10T1170AA 1-244-070
3a. Profile Attachment Top/BottomMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10D01E0.01 1-244-012
3b. Profile Attachment Bottom & BackIncludes Back bracket cover capMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10D01EA.01 1-244-014
9. Drive UnitMaterial Colour Blum No Code
NylonLight Grey RAL
7037Z10A3000.02 1-244-004
12. Connecting Node & Cable End ProtectorMaterial Colour Blum No CodeNylon Black/Orange Z10V100E.01 1-244-079
1a. Blum Distance BumperDiameter Blum No CodeØ 5 mm 993.0530 1-244-009
11. Distribution Cable & Cable End ProtectorLength Blum No Code8m Z10K800AE 1-244-080
13. SERVO-DRIVE TransformerDescription Blum No Code72W/240V Z10NE050.01 1-244-050
14. Cable & PlugDescription Blum No CodeAustralian Plug Z10M200K 1-244-051
15a. Transformer Base HousingMaterial Blum No CodeNylon Z10NG000 1-244-053
15b. Transformer Base HousingMaterial Blum No CodeNylon Z10NG120 1-244-055
19. Cable HolderFor securing the distribution cableMaterial Blum No CodeNylon Z10K0009 1-244-007
18. Syncronisation CablesLength Blum No Code1600mm Z10K160S 1-244-0241200mm Z10K120S 1-244-022
80mm Z10K008S 1-244-020
LINCOLN SENTRY
Drawer Systems
A.2DRAWERS, HINGES & ASSEMBLY DEVICES A.179
A
Draw
ers, Hinges &
Assembly D
evices
SERVO-DRIVE FOR MOVENTO/TANDEM
Planning - horizontal cross member
Planning - vertical cross member
Drilling distance base/cross bar
Drilling distance base/cross bar
Drawer with overlay front
X Drilling position NL + 16 mmY Min. space requirement NL + 30 mmZ Distance from cabinet front edge to drilling 37mm
X Drilling position NL + 16 mmY Min. space requirement NL + 30 mmZ Distance from cabinet front edge to drilling 37mm
MOVENTO Inner cabinet width LW 236 - 390 mm TANDEM Inner cabinet width LW 225 - 245 mm
MOVENTO Inner cabinet width LW 236 - 390 mm TANDEM Inner cabinet width LW 225 - 245 mm
TANDEM Inner cabinet width LW 246 - 340 mm
TANDEM Inner cabinet width LW 246 - 340 mm
MOVENTO Inner cabinet width LW > 390 mm TANDEM Inner cabinet width LW > 340 mm
MOVENTO Inner cabinet width LW > 390 mm TANDEM Inner cabinet width LW > 340 mm
TANDEM
71
68
50
MOVENTO
88
3568
55
35
≤ 420 mm
> 420 mm
Y (mm)X (mm)Y (mm)X (mm)
Inner cabinet width LW
TANDEM
91
76
50
MOVENTO
96
3576
55
35
≤ 420 mm
> 420 mm
Y (mm)X (mm)Y (mm)X (mm)
Inner cabinet width LW
* Distance from drawer to top panel
* Distance from drawer to top panel
Drawer Systems
DRAWERS, HINGES & ASSEMBLY DEVICESA.180
Dra
wer
s, H
inge
s &
Ass
embl
y D
evic
es
A
Dimension data and specifications may change without notification
SERVO-DRIVE FOR MOVENTO/TANDEM
KB Cabinet width LW Inner cabinet width LT Internal cabinet depth NL Nominal length
SWS Side panel thickness FS Front thickness
LH Internal cabinet height PL Bracket profile length
Lower cabling Back cabling Bracket profile cutting dimensions
Front assembly - position of Blum distance bumper
Drawer with overlay front
Planning - horizontal & vertical cross member
The Blum distance bumper creates and maintains the required trigger path of 2 mm
FA Front overlay
FH Front height
Blum’s ORGA-LINE solutions will help make sure everything has its place and can be easily found when you need it. ORGA-LINE inner dividers and containers organise interiors ensuring clear visibility of all drawer contents. It includes solutions for drawers, pantry pull-outs and a range of accessories to further simplify your kitchen experience. The range also includes accessories such as film and foil dispensers, plus knife, plate and spice holders.
ORGA-LINE can enhance practicality throughout your home and is suitable for Blum TANDEMBOX intivo and TANDEMBOX antaro drawers and pantry pull-outs. The containers can be easily removed and are designed for dishwasher use.
Organisation your way with ORGA-LINE
Cabinet Hardware Catalogue AmendmentsA7 - DRAWER SYSTEMS - MOVENTO AS OF 01 JULY 2014
LINCOLN SENTRY CABINET HARDWARE CATALOGUE AMENDMENTS
Page Code Description of Issue Action New Code or Change Amendment DateA.172 Add TIP ON watermark Add watermark 01 July 2014