drill more holes · interchangable heavy duty kellys, swap square & round kellys to match...
TRANSCRIPT
TOUGHER > FASTER > SIMPLER
DRILL MORE HOLES
WATSONUSA.COM800-927-8486
4300138,000 ft-lb, 187 kNm
SPIN OFF 100 rpm
LINEPULL 40,000 lb, 178 kN
WEIGHT 107,000 lbs, 48 mT
MAX DEPTH 160 ft, 56 m
a company
MODEL 4300
150-6/18 © 2018 Watson, Inc.
4015 South FreewayFort Worth, Texas 76110
DEFINING FEATURES
Tri-Drive Rotary achieves max torque and max spinoff without clutches or gear shifting
Dual Rotary Positioning Cylinders provide 25’ of rotary clearance and easy setup
Full Travel Top Crowd drills straighter holes in less time with no outer bar locks
Big Tool Clearance 9’ (2.7m) tool diameter around the tracks with 60” (1.5m) dia up the mast
Interchangable Heavy Duty Kellys, swap square & round kellys to match drilling conditions
Controlled freefall with single layer grooved drum for faster cycle times & less rope wear
One Piece Load & Zero Setup enhances mobility with kellys on board and no specialty permits
Swing Out Operator’s Cab increases safety with optimal view of hole, winches and offside
Pilot Controls replace all electronics to provide superior controls and fewer headaches
STANDARD OPTIONS
Two mast heights and multiple kelly bar options available to meet specific drill depth needs
Bluetooth speakers | USB charging ports | 120V Power outlets | PA system | Camera system
Reaction jack installation (Crawler Only) | Quick detach mast
Sectional casing drive adapter | Integrated air bars | CFA conversion available upon request
PERFORMANCEPOWER . . . . . . . . . . . . . . . . . .250 hp
186 kW
TORQUE . . . . . . . . . . . . . . . . .138,000 ft-lb
187 kNm
SPIN OFF . . . . . . . . . . . . . . . . .100 rpm
KELLY WINCH . . . . . . . . . . . .40,000 lbs
With FREEFALL 178 kN
SERVICE WINCH . . . . . . . . . . .18,000 lbs
80 kN
CROWD FORCE . . . . . . . . . . . .50,000 lbs
222 kN
CONFIGURATIONTRUCK BASE . . . . . . . . . . . . . .10X4 Carrier
TRUCK WEIGHT . . . . . . . . . .100,000 lbs
45,360 kgs
CRAWLER WEIGHT . . . . . . . .107,000 lbs
48,534 kgs
DRILLING DEPTH 160 ft
(4-ELEMENT) 56 m
CROWD STROKE . . . . . . . . . .40 ft
12.1 m
SIDE TILT . . . . . . . . . . . . . . . .7º left/right