drilling – punching – cutting – deburring · double-acting page 49 hydraulic pumps page 47-...

Index Drilling – Punching – Cutting – Deburring

Rotabest® Metal Core Drilling MachinesPage 4 - 25




Metal Core Drilling – TappingPage 28

Tool Holders/AdaptorsPage 26 / 41

Cutters HSS-CoPage 34 - 37

TCT Cutters-Weldon ShankPage 38 - 39

TCT Cutters ALPage 40

Adaptors/ ExtensionsPage 42

Hydraulic Punching Units single-actingPage 43 - 48

Hydraulic Punching Unitsdouble-actingPage 49

Hydraulic PumpsPage 47- 49

Deburring Devices Page 53 - 59

Bevel Milling MachinePage 60 - 61

Deburring DevicesPage 62 - 65

Deburring DevicesPage 66 - 69

Rotaspeed® Cutting Saw RS 230APage 70 - 73

355 (14“) Super Dry Cut SawPage 74

16“ Super Dry Cut SawPage 75

HSS-Bi-Metal Hole Saws/SetsPage 76 - 80

TCT-Hole SawsPage 81 - 85

TCT-Hole Saws MBS + MBS ProPage 86 - 89

Multi-Step DrillsPrecision Conical One-Lip BitsPage 90 - 92

Astroflex® Sabre Saw BladesSabre Saw and Jigsaw BladesMetal Hacksaw BladesPage 93 - 95

Battery-packedcompact hydraulic punchPage 96 - 97

Puncher and Puncher SetsPage 98 - 103

Special Puncher04 -

ALFRA – separates the tools from the toys 3

Ergonomicdesignedhandle

SolidbaseplateRetractingbladeguard

Lateralripfenceforstraightcuts

ALFRA – separates the tools from the toys70

Motorwithhigh-performancegearbox

Tool-lessbevelingadjustmentContinuouslyadjustablebevelfeatureupto45°(with5lockingpositions)

easyremovehotchipcollector

Safetylockbutton

Tool-lessadjustmentofcuttingdepth


ALFRA-Rotaspeed® – Metal-Cutting Saw RS 230A

The look of a manual circular saw automatically creates a correlation with wood or wood-similar materials. To cut metal with manual Circular Cutting Saws is rather unusual. Due to this reason, ALFRA developed a manual Circular Saw, which mainly cuts metal. The ideal machine for worksite and workshop, for almost burr-free cutting without cooling.

For fast and clean cuts of pipes, threaded rod, profiles, wire ducts, corrugated and trap-ezoidal sheets, sandwich panels, dry mortarless construction profiles and more...

Advantages at a glance:■ 1700 Watts high-performance motor for exact cuts without coolant .■ Fast and easy change of saw blade.■ Continuously adjustable cutting depth up to 3-3/16“ at the RS 230A.■ Continuously adjustable bevel feature up to 45° (with 5 locking positions)■ Chip collector.■ The ideal machine for site assembly, facade builders, repair shops, locksmiths, rack

builders, roofers, booth builders, welding shops, plumbing and heating contractors.■ Ideally applicable, where angle grinders aren´t strong enough or work unclean.■ Ideal for the preparation of weld by mitre cutting.■ Soft start.

ALFRA RotaSpeed® RS 230ASaw blade Ø: 9“ – 230 mmBore hole: will accept 3/4“, 20 mm and 1-3/16“30 mmPower Input: 1700 WattLoad speed: 2600 rpmGehrung: 0 - 45°Cutting capacity 0°: 3-3/16“ – 82 mmCutting capacity 45°: 2-3/16“ – 56 mmMaterial Thickness: 3/16“ - 1/2“ – 6 - 8 mmMotor/Voltage: 110 - 50/60 HzWeight: 15 lbs. – 7,1 kg

Prod.-No.ALFRA RotaSpeed® RS 230 Tungsten-Carbide-Tipped cpl. RS 230A

Contents include:Machine with Operation Manual, Rip Fence, Set of Tools, Distance sleeve for Saw Blade Arbor, in cardboard box.

Technical modifications due to permanent innovation reserved.


ALFRA-Rotaspeed® – TCT Saw BladesMade in Germany

■ TCT Saw Blades suitable on Metal Cutting Saws from: ALFRA, Flex, Euroboor, Evolution, Hitech, Jepson, Metallkraft, Ridgid u. a..

■ For fast and clean cuts of pipes, threaded rods, profiles, wire ducts, corrugated and trapezoidal sheets, sandwich panels, dry mortarless, construction profiles and more...

■ Suitable for metal, CrNi-steel, aluminum.

■ High performance and durability. Excellent cost-performance ratio.

■ Pleasepayattentiontotheinstructioninthemanualbook.

Premium-QualityØ mm/inch for use Dimensions mm No. of teeth Prod.-No.

180/7“ Steel* 7“ x 20 mm – 180 x 20 34 22205180/7“ Aluminium 7“ x 20 mm – 180 x 20 48 22206

200/8“ Steel* 8“ x 20 mm – 200 x 20 42 22255200/8“ Aluminium 8“ x 20 mm – 200 x 20 54 22256 230/9“ Steel* 9“ x 1“ – 230 x 25.4 48 22305230/9“ Aluminium 9“ x 1“ – 230 x 25.4 62 22306

* Durability depends on material and its thickness. It can be less, when cutting stainless steel.

ALFRA Saw – RotaSafe® Fire and Rescue Saw Blades

Perfect sawblades for fire and rescue!

For the cutting of timber, plates, formwork materials, gas concrete, doesn´t make bones about nails and concrete residues. Suitable on Metal Cutting Saws from ALFRA, Flex, Euroboor, Evolution, Hitech, Jepson, Metallkraft, Ridgid u. a..

Specially designed Blade body and extremely ductile carbide quality. Perfectly suitable for problematic applications on the worksite.

Ø Thickness Teeth Bore Prod.No.12“ 1/8“ 20 3/4“ – 20 mm 87022020S12“ 1/8“ 20 1“ 870220254S14“ 9/64“ 24 3/4“ – 20 mm 87042420S14“ 9/64“ 24 1“ 870424254S


ALFRA-RotaDry® – 14“ Dry Cut Metal-Saw

Arguments which are convincing in quality, performance and pricing:■ For almost burr-free cutting of profiles and pipes out of steel, iron, cupper, brass,

aluminium, plastics, compounds, stainless steel without cooling■ Application in steel construction, cabinet making, interior fittings etc.■ with depth fence for accurate cutting ■ angle and parallel stopper for mitre cuts up to 45°■ with a removable chips collecting sump ■ with arbor adjustment for changing the saw blades■ easy to transport

ALFRA RotaDry® 14“ (355 mm)engine 110V/ 60 Hzpower consumption 2200 Wrotation speed 1300 rpmcutting capacity 90° 1/2“ material thickness 7“ x 4-1/8“cutting capacity 90° 1/2“ material thickness 4-3/4“ x 4-3/4“cutting capacity 90° 1/2“ material thickness 5-1/3“cutting capacity 45° 1/2“ material thickness 4-1/2“ x 4“cutting capacity 45° 1/2“ material thickness 4“ x 4“cutting capacity 45° 1/2“ material thickness 4-1/8“saw blade diameter 14“ – 355 mmweight 50.6 lbs. – 23 kg

Prod.-No.

Alfra RotaDry® 14” RD 355

ALFRA Circular Saw Blades Blades fits all 1“ arbor sawsThe universal TCT saw blade for fast cuts in:Steel – copper – aluminium – profiles – cables – sheets – solid materials

■ without coolant■ regrindable

Dimensions No./Teeth Steel Stainless steel* Prod.-No.

12“/305 x 2.2 x 1“ 60 • – 3210012“/305 x 2.2 x 1“ 80 • • 3210114“/355 x 2.6 x 1“ 72 • – 3210414“/355 x 2.6 x 1“ 80 • • 3210314“/355 x 2.6 x 1“ 90 • • 3210214“/355 x 2.6 x 1“ 72 coated • 3210516“/400 x 2,6 x 1“ 80 • • 3210616“/400 x 2,6 x 1“ 90 coated • 32107

Other teeth quantities on request.

* Durability depends on material and its thickness. It can be less, when cutting stainless steel.

Prod.-No. RD 355

355 x 2.6 x 25.4 • 90 T • coated

MadeintheUSA


ALFRA-RotaDry® – 16“ Dry Cut Metal-Saw

■ Miter cut (45 degrees left & right) ■ Self-Centering Vise for accurate, burr-free cuts ■ Vise clamps on both sides of the blade ■ 2 Speeds:

▪ 380 rpm (Mild Steel and Stainless Steel) ▪ 680 rpm (Aluminum, Brass and Copper)

■ Chip-Tray for easy clean-up ■ 220 Single Phase

includesFREEPREMIUMB

lade!

The ALFRA 16” Rota Speed Miter Saw cuts tubular, solid, angled, and other steel shapes that can be secured between the vise jaws safely.

ALFRA RotaDry® 16“ (400 mm) Dry Cut Metal-Sawengine 3HP, 220V/ 60Hz, 16 Ampsrotation speed 2 speed 680/ 380rpm Miter Range: 0 - 45°Square tubing 90°: 5-1/8” x 5-1/8”Square tubing 45°: 3-1/8” x 3-1/8”Rectangular 90°: 6-1/4“ x 5-1/8”Rectangular 45°: 5-1/4“ x 3-1/8”Round tubing 90°: to 5-3/4”Round tubing 45°: to 3-1/8”(Tubing efficiently cut to 1/2” wall thickness)Solids Rounds 90°: to 2-3/4”Solids Rounds 45°: to 2”Weight: 479 lbs.Dimensions: Floor print 34“ x 35“ Height 6‘ 2“

Prod.-No.ALFRA RotaDry® 16“ RD400


Features:■ High concentricity

■ With solid base plate, thus more threads and higher stability as well as concentric running exactness.

■ Combi-toothing 4/6 tpi for material from 2 mm with positive chip- and cutting angle. This variable spacing provides a more even cut, for a minor generation of vibration and heat. Lower expenditure of energy when cutting.

■ Cutting Depth: 38 mm (1 1/2“).

■ Lateral slots help to remove the core.

■ Suitable for unalloyed steel (up to 700 N/mm2), nonferrous metals, light metals, plastics, gypsum, pulp wood- and plywood boards, lightweight building boards and general wood processing.

■ Drill bit exchangeable with other commercially available arbors.


Also steel/stainless steel up to approx. 1/8“, can be used easily (for frequent use, we rec-ommend our TCT Hole Saws).

… tailored to work on softwoods.


ALFRA – HSS-Bi-Metal Hole SawsWith Cobalt-alloyed teeth (M42)

Combi-toothing 4/6 TpI

Ø from 9/16“– 14 m to 8-5/16“ – 210 mm available

blister pack available

ALFRA HSS-Bi-Metal Hole Saws are applicable in portable and pillar drilling machines. When using pilar drilling machines, use manual feed only.

Features:■ High concentricity■ With solid base plate, thus more threads and higher stability as well as concentric

running exactness.■ Combi-toothing 4/6 tpi for material as from 5/64“ – 2 mm with positive chip- and cut-

ting angle. This variable spacing provides a more even cut, for a minor generation of vibrations and heat. Lower expenditure of energy when cutting.

■ Cutting Depth: 1-1/2“ – 38 mm.■ Lateral slots help to remove the core.■ Suitable for unalloyed steel (up to 700 N/mm2), nonferrous metals, light metals,

plastics, gypsum, pulp wood- and plywood boards, lightweight building boards and general wood processing.

■ Drill bit exchangeable with other commercially available arbors.

Tip:Start drilling operation with light pressure. Continue with light and steady pressure, avoid pendulum motion, follow the speed chart, use coolant. When cutting wood or wood substitutes, remove drill dust in time.

Saw-Ø mm Inch Prod.-No.

14.0 9/16 0500014 16.0 5/8 0500016 17.0 11/16 0500017 19.0 3/4 0500019 20.0 15/19 0500020 21.0 13/16 0500021 22.0 7/8 0500022 24.0 15/16 0500024 25.0 1 0500025 27.0 11/16 0500027 29.0 11/8 0500029 30.0 13/16 0500030 32.0 11/4 0500032 33.0 15/16 0500033 35.0 13/8 0500035 37.0 17/16 0500037 38.0 11/2 0500038 40.0 19/16 0500040 41.0 15/8 0500041 43.0 111/16 0500043 44.0 13/4 0500044 46.0 113/16 0500046 48.0 17/8 0500048 51.0 2 0500051 52.0 21/16 0500052 54.0 21/8 0500054 57.0 21/4 0500057 59.0 25/16 0500059 60.0 23/8 0500060 64.0 21/2 0500064 65.0 29/16 0500065 67.0 25/8 0500067 68.0 211/16 0500068 70.0 23/4 0500070 73.0 27/8 0500073


ALFRA – HSS-Bi-Metal Hole SawsWith Cobalt-alloyed teeth (M42)

Saw-Ø mm Inch Prod.-No.

74.0 211/12 0500074 76.0 3 0500076 79.0 31/8 0500079 83.0 31/4 0500083 86.0 33/8 0500086 89.0 31/2 0500089 92.0 35/8 0500092

95.0 33/4 0500095 98.0 37/8 0500098 102.0 4 0500102 105.0 41/8 0500105

108.0 41/4 0500108 111.0 43/8 0500111 114.0 41/2 0500114 121.0 43/4 0500121 127.0 5 0500127

140.0 51/2 0500140 152.0 6 0500152

From Ø 160.0 mm (65/16“) only suitable for wood and wood substitutes. 160.0 65/16 0500160 168.0 65/8 0500168 177.0 7 0500177 210.0 85/16 0500210

Arborswith guiding drill bit

Saw-Ø mm Saw-Ø inch Type Shank-Ø Prod-No.

14 - 30 9/16 - 13/16 A 6-SS 9.5 hexagon 0501001 14 - 30 9/16 - 13/16 A 6-SDS SDS 0501002 32 - 152 11/4 - 6 A 2-SS 9.5 hexagon 0501003 32 - 152 11/4 - 6 A 2-SDS SDS 0501005 32 - 210 11/4 - 85/16 A 3-SS 11.11 hexagon 0501006 32 - 210 11/4 - 85/16 A 5-SS 16.0 hexagon 0501008

Accessories:

Extension Shaft 300 mm, 0501010with change adaptor 3/8“ – 9.5 mm for A 6-SS + A 2-SS

Spare Center Drill HSS Ø 6,35 mm x 80 mm 0502001for A 6-SS + A 6-SDS + A 2-SS + A 2-SDS + A 3-SS + A 5-SS

Ejector Spring 0502004

Important: Disable impact drill when using SDS-shanks!

Prod.-No. 0501006 A3-SS

Prod.-No. 0501010

Prod.-No. 0502001

Prod.-No. 0502004

Prod.-No. 0501001 A6-SS

3/8“

Prod.-No. 0501002 A6-SDS

Prod.-No. 0501003 A2-SS

3/8“

Prod.-No. 0501005 A2-SDS

7/16“

3/8“ - 9,5 mm


ALFRA – HSS-Bi-Metal Hole Saws - KitsM42 HSS Hole Saws (8% cobalt)

Prod.-No. 0503006

Prod.-No. 0503007

Prod.-No. 0503008

Prod.-No. 0503009

The following Professional HSS Bi-Metal Hole Saw Kits are designed for General Purpose, Maintenance, Electrical and Plumbing applications.All kits include a solid transportation case.

General Purpose Kit Prod.-No. 0503006

Content:Ø 16 mm (5/8“)Ø 19 mm (3/4“)Ø 22 mm (7/8“)Ø 25 mm (1“)Ø 29 mm (1 1/8“)Ø 32 mm (1 1/4“)Ø 35 mm (1 3/8“)Ø 38 mm (1 1/2“)Ø 44 mm (1 3/4“)Ø 51 mm (2“)Ø 64 mm (2 1/2“)Ø 76 mm (3“)Arbor A6-SS, Arbor A2-SS, Spare Twist Drill

Maintenance Kit Prod.-No. 0503007

Content:Ø 19 mm (3/4“)Ø 22 mm (7/8“)Ø 29 mm (1 1/8“)Ø 35 mm (1 3/8“)Ø 38 mm (1 1/2“)Ø 44 mm (1 3/4“)Ø 51 mm (2“)Ø 57 mm (2 1/4“)Ø 64 mm (2 1/2“)Arbor A6-SS, Arbor A2-SS, Spare Twist Drill

Electrician‘s Kit Prod.-No. 0503008

Content:Ø 22 mm (7/8“)Ø 29 mm (1 1/8“)Ø 35 mm (1 3/8“)Ø 44 mm (1 3/4“)Ø 51 mm (2“)Ø 64 mm (2 1/2“)Arbor A6-SS, Arbor A2-SS, Spare Twist Drill

Plumber‘s Kit Prod.-No. 0503009

Content:Ø 19 mm (3/4“)Ø 22 mm (7/8“)Ø 29 mm (1 1/8“)Ø 38 mm (1 1/2“)Ø 44 mm (1 3/4“)Ø 57 mm (2 1/4“)Arbor A6-SS, Arbor A2-SS, Spare Twist Drill

Sales Display on request!


81ALFRA – separates the tools from the toysALFRA – separates the tools from the toys 81

ALFRA TCT-Hole Saws – Short TypeMade in Germany by ALFRA

The application area of TCT Hole Saws differs from HSS-Bi-Metal Hole Saws. With AL-FRA TCT Hole Saws, suitable to economically process stainless steel up to 2 mm (5/64“), unalloyed steels up to 4 mm (3/16“), plastics, PVC, aluminium, zinc, gypsum plaster boards and lightweight building boards, as well as asbestos. For the use on portable- and pillar drilling machines. Do not use automatic feed, when working with pillar drilling machines.

Features: ■ High concentric running exactness through solid construction.■ CAD-optimized cutting angles with specially ground section ensures high cutting

capacity and long tool life.■ Quick removal of drilled core through ejector spring for all hole saws up to Ø 150 mm

(5 29/32“).■ Carbide tipping enables repeated re-grinding.■ Exchangeable center pin.■ As from Ø 31 mm (1 7/32“) use of MT tool holders.

Tips: ■At thicker materials: cut 2-3 mm (5/64“ - 1/8“) per cutting process, remove chips after-

wards.■ When cutting metals, a high- grade cutting oil should be used.

Exception: Do not use cutting oil when using cast iron, use parrafin instead of oil when cutting aluminium.

■Keep in mind: Always wear safety goggles.

Another safety feature:FromØ15.2mm(3/16“)to30.0mm(11/8“),theHoleSawismadeofonepiece.FromØ31.0mm(13/16“)weusespecialhardenedtoolholderstoabsorbheavydutytorsionforcesandsubsequentlytoavoidashearingoffoftheshank.Incomparable with any of our competitors products!!!

Ø 15.2 - 50.0 mm =̂ 10.0 mm shankØ 9/16“ - 2“ =̂ 3/8“ shankØ 51.0 - 150.0 mm =̂ 13.0 mm shankØ 2“ - 6“ =̂ 1/2“ shank

Basic body

Clamping screw

Ejector Spring

Tapered center drill with pre- and post cutterCentering without running off(center punching not necessary)

4 mm (3/16“)12 mm (7/16“)


ALFRA TCT-Hole Saws – Short TypeMade in Germany by ALFRA

Ø mm

Ø Inch

No. of teeth mm Inch

Ø 16.0 5/8”’ 4 0600160 0630160Ø 17.0 4 0600170Ø 18.0 11/16” 4 0600180 0630180Ø 18.6 4 0600186Ø 19.0 3/4” 4 0600190 0630190Ø 20.0 5 0600200Ø 20.4 5 0600204Ø 21.0 13/16” 5 0600210 0630210Ø 22.0 5 0600220Ø 22.5 5 0600225Ø 23.0 7/8” 5 0600230 0630230Ø 24.0 15/16” 5 0600240 0630240Ø 25.0 5 0600250Ø 26.0 1” 5 0600260 0630260Ø 27.0 1-1/16” 5 0600270 0630270Ø 28.0 5 0600280Ø 28.3 5 0600283Ø 29.0 1-1/8” 5 0600290 0630290Ø 30.0 1-3/16” 5 0600300 0630300Ø 31.0 6 0600310Ø 32.0 1-1/4” 6 0600320 0630320Ø 33.0 6 0600330Ø 34.0 1-5/16” 6 0600340 0630340Ø 35.0 1-3/8” 6 0600350 0630350Ø 36.0 6 0600360Ø 37.0 1-7/16” 7 0600370 0630370Ø 38.0 7 0600380Ø 39.0 1-1/2” 7 0600390 0630390Ø 40.0 1-9/16” 7 0600400 0630400Ø 41.0 8 0600410Ø 42.0 1-5/8” 8 0600420 0630420Ø 43.0 1-11/16” 8 0600430 0630430Ø 44.0 8 0600440Ø 45.0 1-3/4” 8 0600450 0630450Ø 46.0 8 0600460Ø 47.0 1-13/16” 9 0600470 0630470Ø 48.0 1-7/8” 9 0600480 0630480Ø 49.0 9 0600490Ø 50.0 1-15/16” 9 0600500 0630500Ø 51.0 2” 9 0600510 0630510Ø 52.0 10 0600520Ø 53.0 2-1/16” 10 0600530 0630530Ø 54.0 2-1/8” 10 0600540 0630540Ø 55.0 10 0600550Ø 56.0 2-3/16” 10 0600560 0630560Ø 57.0 2-1/4” 10 0600570 0630570Ø 58.0 10 0600580Ø 59.0 2-5/16” 10 0600590 0630590Ø 60.0 2-3/8” 10 0600600 0630630Ø 61.0 11 0600610Ø 62.0 2-7/16” 11 0600620 0630620Ø 63.0 11 0600630Ø 64.0 2-1/2” 11 0600640 0630640Ø 65.0 11 0600650Ø 66.0 2-9/16” 12 0600660 0630660Ø 67.0 2-5/8” 12 0600670 0630670Ø 68.0 12 0600680Ø 69.0 2-11/16” 12 0600690 0630690Ø 70.0 2-3/4” 12 0600700 0630700Ø 71.0 12 0600710Ø 72.0 2-13/16” 13 0600720 0630720Ø 73.0 2-7/8” 13 0600730 0630730Ø 74.0 2-15/16” 13 0600740 0630740Ø 75.0 13 0600750Ø 76.0 3” 13 0600760 0630760Ø 77.0 13 0600770

Ø mm

Ø Inch


Ø 78.0 3-1/16” 14 0600780 0630780Ø 79.0 3-1/8” 14 0600790 0630790Ø 80.0 14 0600800Ø 81.0 3-3/16” 14 0600810 0630810Ø 82.0 14 0600820Ø 83.0 3-1/4” 14 0600830 0630830Ø 84.0 3-5/16” 15 0600840 0630840Ø 85.0 15 0600850Ø 86.0 3-3/8” 15 0600860 0630860Ø 87.0 3-7/16” 15 0600870 0630870Ø 88.0 15 0600880Ø 89.0 3-1/2” 16 0600890 0630890Ø 90.0 3-9/16” 16 0600900 0630900Ø 91.0 16 0600910Ø 92.0 3-5/8” 16 0600920 0630920Ø 93.0 16 0600930Ø 94.0 3-11/16” 16 0600940 0630940Ø 95.0 3-3/4” 17 0600950 0630950Ø 96.0 17 0600960Ø 97.0 3-13/16” 17 0600970 0630970Ø 98.0 3-7/8” 17 0600980 0630980Ø 99.0 17 0600990Ø 100.0 3-15/16” 17 0601000 0631000Ø 105.0 4” 18 0601050 0631050Ø 110.0 18 0601100Ø 115.0 4-1/2” 20 0601150 0631150Ø 120.0 20 0601200Ø 125.0 20 0601250Ø 130.0 5” 20 0601300 0631300Ø 135.0 24 0601350Ø 140.0 5-1/2” 24 0601400 0631400Ø 145.0 24 0601450Ø 150.0 24 0601500

HSS-Spare Drillwith tapered center tip

from Ø 5/8“ - 5-29/32“ Ø 15/64“ 0602650

From Ø 61 mm we recommend Tool Holders MT2 and MT3.

MT-2 (up to Ø 3-15/16“) 0734002MT-3 (up to Ø 5-29/32“) 0734003

Spare Ejector Springfrom Ø 5/8“ - 3-15/16“ Ø 15/64“ 0602006

Coolant ALFRAALFRA BIO 2000For mild steel St 37, 13.7 oz 21010

ALFRA 3000For chrome-nickel steels17.6 oz 21030

Set MetricProd.-No.

Set Metric 0600001

Content:1 each of Ø 16/20/25/32/40 mm2 Allen Keys

Set InchProd.-No.

Set Inch 0630001

Content:1 each of Ø 5/8, 3/4 , 1, 1-1/4, 1-9/16”2 Allen Keys

Prod.-No.complete

Prod.-No.complete


ALFRA TCT-Hole Saws – Long TypeMade in Germany by ALFRA

Features: ■ Especially developed for the use on pipes, vaulted materials, for unalloyed and al-

loyed steels, nonferrous metals, plastics as well as glass fibre reinforced plastic.■ For material thickness up to 4 mm (3/16“), 2 mm (5/64“) stainless steel■ For the use on hand drilling machines or pillar drilling machines

Tips: ■Start drilling operation with light pressure, when drilling pipes. Avoid pendulum motions.■Keep in mind: Always wear safety goggles.

Special tools for special applications on request!

Ø 20.0 - 50.0 mm =̂ 10.0 mm shankØ 25/32“ - 1-15/16“ =̂ 3/8“ shankØ 51.0 - 100.0 mm =̂ 13.0 mm shankØ 2“ - 3-15/16“ =̂ 1/2“ shank

Basic body

Clamping screw


4 mm (3/16“)

Ø 20.0 - 59.0 mm =̂ 35.0 mmØ 25/32“ - 2 5/16“ =̂ 1 3/8“Ø 60.0 - 100.0 mm =̂ 60.0 mmØ 2 3/8“ - 3-15/16“ =̂ 2 3/8“

Special tool for Macrolon

Special tool for insulation


ALFRA TCT-Hole Saws – Long TypeMade in Germany by ALFRA

Highly recommended accessories – coolant and lubricant!

HSS -Spare Drillwith tapered center tip

6 x 80 mm 07026808 x 80 mm 07028808 x 100 mm 0702800

MT2 and MT3 arbors suitable as from Ø 31mm

MT-2 (up to Ø 3-15/16“) 0734002MT-3 (up to Ø 5-29/32“) 0734003

Ø mm

Ø Inch


Ø 20.0 5 0700200Ø 20.4 Ø 21.0 13/16" 5 0700210 0710210Ø 22.0 5 0700220Ø 22.5 Ø 23.0 7/8" 5 0700230 0710230Ø 24.0 15/16" 6 0700240 0710240Ø 25.0 6 0700250Ø 26.0 1" 6 0700260 0710260Ø 27.0 1-1/16" 6 0700270 0710270Ø 28.0 6 0700280Ø 28.3 Ø 29.0 1-1/8" 6 0700290 0710290Ø 30.0 1-3/16" 6 0700300 0710300Ø 31.0 8 0700310Ø 32.0 1-1/4" 8 0700320 0710320Ø 33.0 8 0700330Ø 34.0 1-5/16" 8 0700340 0710340Ø 35.0 1-3/8" 8 0700350 0710350Ø 36.0 8 0700360Ø 37.0 1-7/16" 8 0700370 0710370Ø 38.0 8 0700380Ø 39.0 1-1/2" 8 0700390 0710390Ø 40.0 1-9/16" 10 0700400 0710400Ø 41.0 10 0700410Ø 42.0 1-5/8" 10 0700420 0710420Ø 43.0 1-11/16" 10 0700430 0710430Ø 44.0 10 0700440Ø 45.0 1-3/4" 10 0700450 0710450Ø 46.0 10 0700460Ø 47.0 1-13/16" 10 0700470 0710470Ø 48.0 1-7/8" 10 0700480 0710480Ø 49.0 10 0700490Ø 50.0 1-15/16" 12 0700500 0710500Ø 51.0 2" 12 0700510 0710510Ø 52.0 12 0700520Ø 53.0 2-1/16" 12 0700530 0710530Ø 54.0 2-1/8" 12 0700540 0710540

Ø mm

Ø Inch


Ø 55.0 12 0700550Ø 56.0 2-3/16" 12 0700560 0710560Ø 57.0 2-1/4" 12 0700570 0710570Ø 58.0 12 0700580Ø 59.0 2-5/16" 12 0700590 0710590Ø 60.0 2-3/8" 14 0700600 0710600Ø 61.0 14 0700610Ø 62.0 2-7/16" 14 0700620 0710620Ø 63.0 14 0700630Ø 64.0 2-1/2" 14 0700640 0710640Ø 65.0 14 0700650Ø 66.0 2-9/16" 14 0700660 0710660Ø 67.0 2-5/8" 16 0700670 0710670Ø 68.0 16 0700680Ø 69.0 2-11/16" 16 0700690 0710690Ø 70.0 2-3/4" 16 0700700 0710700Ø 71.0 16 0700710Ø 72.0 2-13/16" 16 0700720 0710720Ø 73.0 2-7/8" 16 0700730 0710730Ø 74.0 2-15/16" 16 0700740 0710740Ø 75.0 16 0700750Ø 76.0 3" 18 0700760 0710760Ø 77.0 18 0700770Ø 78.0 3-1/16" 18 0700780 0710780Ø 79.0 3-1/8" 18 0700790 0710790Ø 80.0 18 0700800Ø 81.0 3-3/16" 18 0700810 0710810Ø 82.0 18 0700820Ø 83.0 3-1/4" 18 0700830 0710830Ø 84.0 3-5/16" 20 0700840 0710840Ø 85.0 20 0700850Ø 86.0 3-3/8" 20 0700860 0710860Ø 87.0 3-7/16" 20 0700870 0710870Ø 88.0 20 0700880Ø 89.0 3-1/2" 20 0700890 0710890Ø 90.0 3-9/16" 20 0700900 0710900Ø 91.0 20 0700910Ø 92.0 3-5/8" 20 0700920 0710920

Ø mm

Ø Inch


Ø 93.0 20 0700930Ø 94.0 3-11/16" 22 0700940 0710940Ø 95.0 3-3/4" 22 0700950 0710950Ø 96.0 22 0700960Ø 97.0 3-13/16" 22 0700970 0710970Ø 98.0 3-7/8" 22 0700980 0710980Ø 99.0 22 0700990Ø 100.0 3-15/16" 22 0701000 0711000Ø 105.0 4" 22 0701050 0711050

Prod.-No.complete

ALFRA BIO 2000A fully synthetic cutting oil, developed for high-quality cutting, threading and drilling of metals of any degree of hardness, ferrous metal, steel alloys, chrome nickel steel, V2A and V4A steel, copper, aluminium and their alloys. ALFRA BIO 2000 is free of hydro-carbon, sulphur and chlorine.

Aerosol can 13.7 oz 21010

ALFRA 3000Universal metal working oil free of chlorine.High-performance drilling, clearing and cutting oil, based on mineral oil, to be used for material which is medium-difficult up to difficult to cut. Having a big share of efficient admixtures which grant an optimal cutting capacity and a considerable reduction of wear and tear of the tool.It is in accordance with the standards of work hygiene and safety. We recommend to use ALFRA 3000 especially for the drilling and threading of high-alloy steel and chrome nickel steel.

Aerosol can 17.6 oz 21030

Prod.-No.complete

Prod.-No.complete


ALFRA TCT-Hole Saws –MBSRegistered Utility Model No. 202 03 232.9

This TCT Hole Saw is a multi-range Hole Saw for the universal use up to a material thickness of max. 10 mm (3/8“) (without ejector spring). Through its solid construction and an enhanced cutting geometry (Registered Utility Model No. 202.03 232.9), an improved cutting behaviour combined with a high cutting capacity and tool life, is achieved.

For the use on flat steel, as well as on pipes and vaulted materials.Also suitable for the cutting of overlapping holes.

To be used on Pillar- and Hand Drilling Machines:■ Hand Drilling Machines: up to 4 mm (1/8“) material thickness■ Pillar Drilling Machines: up to 10 mm (3/8“) material thickness

(as from 6 mm (15/64“ ) material thickness, we recommend to clear chips.)

In case of heavy operation, we recommend Morse Taper Tool Holders, which are suit-able as from Ø 37 mm (1 7/16“).

Advantage: All TCT Hole Saws MBS type are equipped with an ejector spring. The cut material is self-ejecting.

Ø 18.0 - 36.0 mm = 10.0 mm shankØ 11/16“ - 1 3/8“ = 3/8“ shankØ 37.0 - 100.0 mm = 13.0 mm shankØ 1 7/16“ - 3 15/16“ = 1/2“ shank

Recommendation: Use exchangeable Morse Taper arbor MT2 or MT3 as from Ø 37.0 mm (1 7/16“) due to stability reasons.

Basic body

Clamping screw

Ejector Spring


10 mm (3/8“)

MBS – for almost limitless use

22 mm (7/8“)

Another special technical feature:As from Ø 37 mm (1 7/8“) specially hardened tool holders to compen-sate the torsional power in case of heavy operation which avoids early shearing off of the tool holder shank.

In terms of construction not comparable with any other make.

Cutting geometriesVariable Teeth, less vibration, longer tool life, smoother cutting.

Chip spacebetweenworkpieceand tool

Center drill

Clampingscrew

Chip guideline TCT-teeth


ALFRA TCT-Hole Saws –MBSRegistered Utility Model No. 202 03 232.9

Drilling structural sheet metal

Drilling rectangular tubing

Drilling steel flat bar

Drilling tubing

Ø mm

Ø Inch


Ø 18.0 11/16” 6 0730018 0731018Ø 18.6 Ø 19.0 3/4” 6 0730019 0731019Ø 20.0 6 0730020Ø 20.4 Ø 21.0 13/16” 6 0730021 0731021Ø 22.0 6 0730022Ø 22.5 Ø 23.0 7/8” 6 0730023 0731023Ø 24.0 15/16” 6 0730024 0731024Ø 25.0 6 0730025Ø 26.0 1” 6 0730026 0731026Ø 27.0 1-1/16” 6 0730027 0731027Ø 28.0 6 0730028Ø 28.3 Ø 29.0 1-1/8” 6 0730029 0731029Ø 30.0 1-3/16” 6 0730030 0731030Ø 31.0 6 0730031Ø 32.0 1-1/4” 6 0730032 0731032Ø 33.0 6 0730033Ø 34.0 1-5/16” 6 0730034 0731034Ø 35.0 1-3/8” 6 0730035 0731035Ø 36.0 6 0730036

As from Ø 37.0 mm (1 7/16“) we recommend the use of MT arbors

Ø 37.0 1-7/16” 6 0730037 0731037Ø 38.0 6 0730038Ø 39.0 1-1/2” 6 0730039 0731039Ø 40.0 1-9/16” 6 0730040 0731040Ø 41.0 6 0730041Ø 42.0 1-5/8” 6 0730042 0731042Ø 43.0 1-11/16” 6 0730043 0731043Ø 44.0 6 0730044Ø 45.0 1-3/4” 6 0730045 0731045Ø 46.0 6 0730046Ø 47.0 1-13/16” 6 0730047 0731047Ø 48.0 1-7/8” 6 0730048 0731048Ø 49.0 6 0730049Ø 50.0 1-15/16” 6 0730050 0731050Ø 51.0 2” 6 0730051 0731051Ø 52.0 6 0730052Ø 53.0 2-1/16” 6 0730053 0731053Ø 54.0 2-1/8” 6 0730054 0731054Ø 55.0 6 0730055Ø 56.0 2-3/16” 6 0730056 0731056Ø 57.0 2-1/4” 6 0730057 0731057Ø 58.0 6 0730058Ø 59.0 2-5/16” 6 0730059 0731059Ø 60.0 2-3/8” 8 0730060 0731060Ø 61.0 8 0730061Ø 62.0 2-7/16” 8 0730062 0731062Ø 63.0 8 0730063Ø 64.0 2-1/2” 8 0730064 0731064Ø 65.0 8 0730065Ø 66.0 2-9/16” 8 0730066 0731066Ø 67.0 2-5/8” 8 0730067 0731067Ø 68.0 8 0730068Ø 69.0 2-11/16” 8 0730069 0731069Ø 70.0 2-3/4” 8 0730070 0731070Ø 71.0 10 0730071Ø 72.0 2-13/16” 10 0730072 0731072Ø 73.0 2-7/8” 10 0730073 0731073Ø 74.0 2-15/16” 10 0730074 0731074Ø 75.0 10 0730075Ø 76.0 3” 10 0730076 0731076Ø 77.0 12 0730077

Ø mm

Ø Inch


Ø 78.0 3-1/16” 12 0730078 0731078Ø 79.0 3-1/8” 12 0730079 0731079Ø 80.0 12 0730080Ø 81.0 3-3/16” 12 0730081 0731081Ø 82.0 12 0730082Ø 83.0 3-1/4” 12 0730083 0731083Ø 84.0 3-5/16” 12 0730084 0731084Ø 85.0 12 0730085Ø 86.0 3-3/8” 14 0730086 0731086Ø 87.0 3-7/16” 14 0730087 0731087Ø 88.0 14 0730088Ø 89.0 3-1/2” 14 0730089 0731089Ø 90.0 3-9/16” 14 0730090 0731090Ø 91.0 14 0730091Ø 92.0 3-5/8” 14 0730092 0731092Ø 93.0 14 0730093Ø 94.0 3-11/16” 14 0730094 0731094Ø 95.0 3-3/4” 14 0730095 0731095Ø 96.0 14 0730096Ø 97.0 3-13/16” 14 0730097 0731097Ø 98.0 3-7/8” 14 0730098 0731098Ø 99.0 14 0730099Ø 100.0 3-15/16” 14 0730100 0731100Ø 105.0 4” 14 0730105 0731105


from Ø 15.2 - 100.0 Ø 6 mm 0732680

As from Ø 37mm (1 7/16“) we recommend the use of MT2 and MT3 Tool Holders.

MT-2 0734002MT-3 0734003

Spare Ejector Springfrom Ø 15.2 - 100.0 Ø 6 mm 0732006

Coolant ALFRAALFRA BIO 2000For mild steel St 37, 13.7 oz 21010

ALFRA 3000For stainless steel17.6 oz 21030

Prod.-No.complete

Prod.-No.complete


MBS-Multirange Hole Saws for universal use. Max. cutting depth 20 mm (25/32“)

Suitable for flat materials but also for pipes and curved surfaces. Cutting of overlapping holes is possible.CAD optimized precision tools with high cutting performance and durability.

Use on portable and pilar machines.■ Portable drilling Machines: up to 6 mm (15/64“) material thickness■ Pillar drilling Machines: up to 20 mm (25/32“) material thickness

MBS hole saws can be reshapened, and it is possible to replace broken out teeth depending on the condition of the hole saw.

Advantages: All Alfra TCT Hole Saws MBS-Pro type are equipped with an ejector spring. The cut material is self-ejecting.

Ø 18.0 – 100.0 mm = 13.0 mm shankØ 11/16“ – 3 15/16“ = 33/64“ shankas from Ø 31 suplied with exchange-able Morse taper shank MT 2, MT 3or 13 mm straight shank because of stability reasons.

All TCT Saws MBS Type up to Ø 30 mm are supplied with an ejector spring for slug ejection.

Clamping screw

Basic body

Ejector Spring


20 mm (25/32“)

MBS – for almost limitless use

30 mm (1 3/16“)

Another special technical feature:As from Ø 31 mm specially hardened tool holders to compensate the torsional power in case of heavy operation which avoids early shearing off of the tool holder shank.

In terms of construction not comparable with any other make.

Cutting geometriesVariable Teeth, less vibration, longer tool life, smoother cutting.

ALFRA TCT-Hole Saws –MBS-ProMade in Germany by ALFRA


Drilling structural sheet metal

Drilling tubing

Drilling steel flat bar

Displays for point of sale.

ALFRA TCT-Hole Saws –MBS-ProMade in Germany by ALFRA

Ø mm

Ø Inch


Ø 18.0 11/16" 6 0760018 0761018Ø 18.6 Ø 19.0 3/4" 6 0760019 0761019Ø 20.0 6 0760020Ø 20.4 Ø 21.0 13/16" 6 0760021 0761021Ø 22.0 6 0760022Ø 22.5 Ø 23.0 7/8" 6 0760023 0761023Ø 24.0 15/16" 6 0760024 0761024Ø 25.0 6 0760025Ø 26.0 1" 6 0760026 0761026Ø 27.0 1-1/16" 6 0760027 0761027Ø 28.0 6 0760028Ø 28.3 Ø 29.0 1-1/8" 6 0760029 0761029Ø 30.0 1-3/16" 6 0760030 0761030

As from Ø 31,0 mm (1 7/32) we recommend the use of MT arbors

Ø 31.0 6 0760031Ø 32.0 1-1/4" 6 0760032 0761032Ø 33.0 6 0760033Ø 34.0 1-5/16" 6 0760034 0761034Ø 35.0 1-3/8" 6 0760035 0761035Ø 36.0 6 0760036Ø 37.0 1-7/16" 6 0760037 0761037Ø 38.0 6 0760038Ø 39.0 1-1/2" 6 0760039 0761039Ø 40.0 1-9/16" 6 0760040 0761040Ø 41.0 6 0760041Ø 42.0 1-5/8" 6 0760042 0761042Ø 43.0 1-11/16" 6 0760043 0761043Ø 44.0 6 0760044Ø 45.0 1-3/4" 6 0760045 0761045Ø 46.0 6 0760046Ø 47.0 1-13/16" 6 0760047 0761047Ø 48.0 1-7/8" 6 0760048 0761048Ø 49.0 6 0760049Ø 50.0 1-15/16" 6 0760050 0761050Ø 51.0 2" 6 0760051 0761051Ø 52.0 6 0760052Ø 53.0 2-1/16" 6 0760053 0761053Ø 54.0 2-1/8" 6 0760054 0761054Ø 55.0 6 0760055Ø 56.0 2-3/16" 6 0760056 0761056Ø 57.0 2-1/4" 6 0760057 0761057Ø 58.0 6 0760058Ø 59.0 2-5/16" 6 0760059 0761059Ø 60.0 2-3/8" 8 0760060 0761060Ø 61.0 8 0760061Ø 62.0 2-7/16" 8 0760062 0761062Ø 63.0 8 0760063Ø 64.0 2-1/2" 8 0760064 0761064Ø 65.0 8 0760065Ø 66.0 2-9/16" 8 0760066 0761066Ø 67.0 2-5/8" 8 0760067 0761067Ø 68.0 8 0760068Ø 69.0 2-11/16" 8 0760069 0761069Ø 70.0 2-3/4" 8 0760070 0761070Ø 71.0 10 0760071Ø 72.0 2-13/16" 10 0760072 0761072Ø 73.0 2-7/8" 10 0760076 0761073Ø 74.0 2-15/16" 10 0760074 0761074Ø 75.0 10 0760075

Ø mm

Ø Inch


As from Ø 76 mm (3“) we recommend our Rotabest® TCT Cutters type AL when cut-ting stainless steel. (Prod.-No. 200205....)

Ø 76.0 3" 10 0760076 0761076Ø 77.0 12 0760077Ø 78.0 3-1/16" 12 0760078 0761078Ø 79.0 3-1/8" 12 0760079 0761079Ø 80.0 12 0760080Ø 81.0 3-3/16" 12 0760081 0761081Ø 82.0 12 0760082Ø 83.0 3-1/4" 12 0760083 0761083Ø 84.0 3-5/16" 12 0760084 0761084Ø 85.0 12 0760085Ø 86.0 3-3/8" 14 0760086 0761086Ø 87.0 3-7/16" 14 0760087 0761087Ø 88.0 14 0760088Ø 89.0 3-1/2" 14 0760089 0761089Ø 90.0 3-9/16" 14 0760090 0761090Ø 91.0 14 0760091Ø 92.0 3-5/8" 14 0760092 0761092Ø 93.0 14 0760093Ø 94.0 3-11/16" 14 0760094 0761094Ø 95.0 3-3/4" 14 0760095 0761095Ø 96.0 14 0760096Ø 97.0 3-13/16" 14 0760097 0761097Ø 98.0 3-7/8" 14 0760098 0761098Ø 99.0 14 0760099Ø 100.0 3-15/16" 14 0760100 0761100Ø 105.0 4" 14 0760105 0761105


from Ø 18.0 - 100.0 Ø 6 mm 0732680

Tool Holder as from Ø 31,0 mmMT-2 (up to Ø 100 mm) 0734002MT-3 (up to Ø 150 mm) 0734003

Coolant ALFRAALFRA BIO 2000For mild steel St 37, 405 ml 21010

ALFRA 3000For stainless steel520 ml 21030

Sales DisplaysAsk for our catalogue „World of Displays“

Prod.-No.complete

Prod.-No.complete


Multi-Step Drills – HSS DM O5Exact hole-Ø through cylindrical steps, deburring of the boring through the next stage.

Prod.-No. 08072

Prod.-No. 08073

Prod.-No. 09011

Standard execution with 2 chip spaces■ Exact hole diameter through cylindrical steps■ Immediate deburring through the next step■ Drilling of thinnest sheet metals (up to 4 mm) possible.■ Use coolant stick!

No. Hole Step Step Shank Prod.-No. Holes Sizes Increments Thickness Dia HSS

13 1/8“ - 1/2“ 1/32nds 1/8“ 1/4“ 08101 6 3/16“ - 1/2“ 1/16ths 3/8“ 1/4“ 08102 9 1/4“ - 3/4“ 1/16ths 1/8“ 3/8“ 08103 12 3/16“ - 1/8“ 1/16ths 1/8“ 3/8“ 08104 10 1/4“ - 1-3/8“ 1/8ths 1/8“ 1/2“ 08105 8 9/16“ - 1“ 1/16ths 1/8“ 1/2“ 08110 10 13/16“ - 1-3/8“ 1/16nds 1/8“ 1/2“ 08111

Metric Sizes

Standard execution with 2 chip spaces■ Exact hole diameter through cylindrical steps■ Immediate deburring through the next step■ Drilling of thinnest sheet metals (up to 4 mm) possible.■ Use coolant stick!

Description Range mm Shank Ø Prod.-No.

AM-12 4 - 12 mm 6,0 08070AM-20 6 - 20 mm 9,0 08071AM-30 6 - 30 mm 10,0 08072

Set in box 08073Content:1 of each Type AM-12/AM-20/AM-30

Coolant stick 09011

Standard values for the use of ALFRA Multi-step drillsThese drills were especially developed to drill perfectly round and simultaneously deburred holes in sheet metals of 4-6 mm. The radius transition simultaneously deburrs or bezels the hole. While conical one-lip bits drill slightly conical holes, cylindrical holes can be drilled with ALFRA Multi-step drills. The tools are axial-radially relief ground and can be re-sharpened at the breast of the cutting tooth.

We recommend the use of pillar drilling machines, however, the small ALFRA Multi-step drills can be used on adjustable hand drilling machines. Imperatively use sufficient cooling (ALFRA coolant stick or bore emulsion).


Precision Conical Single-Flute Bits – HSSWith laser-marking

Prod.-No. 09001 Prod.-No. 09002

Prod.-No. 09004 Prod.-No. 09005

Prod.-No. 09006

Prod.-No. 09003

Prod.-No. 09007 Prod.-No. 09008

ALFRA Precision Conical Single-Flute Bits are the ideal tools for the general sheet metal forming. Fields of applications are HVAC, electronic industries, engineering and panel building.

To be used on non-ferrous metals, stainless steels, thermo- and duroplastic plastics, as well as on all common sheet steels up to a material thickness of max. 5/32“ – 4 mm. With ALFRA Precision Conical Single-Flute Bits, you can center, spot drill and bore up in one work step.

Can be regrinded several times.

The tool life can considerably be prolonged by using ALFRA Cutting Oil or Coolant Stick.

Packing: separately in plastic box with operation manual.

*Special Antenna-Bit■ Precision Conical Single-Flute Bits with cylindrical end section to drill holes for car antennas.■ Burr-free, no deformation, no countersinking, dimensional accuracy■ Sizes 6.5 - 22.5 mm

Descrip- Range Range Shank Prod.-No. tion mm inch Ø HSS

1 3.0 - 14.0 1/8“ - 9/16“ 6.0 – 15/64“ 09001H 2 6.0 - 20.0 15/64“ - 51/64“ 8.0 – 5/16“ 09002H 3 16.0 - 30.5 41/64“ - 1-13/64“ 10.0 – 25/64“ 09003H 4 26.0 - 40.0 1“ - 1-37/64“ 12.0 – 15/32“ 09004H 5 35.0 - 50.0 1-3/8“ - 1-31/32“ 12.0 – 15/32“ 09005H 6 46.0 - 60.0 1-13/16“ - 2-23/64“ 13.0 – 33/64“ 09006H 7 L 4.0 - 30.5 5/32“ - 1-13/64“ 10.0 – 25/64“ 09007H 8* 6.0 - 22.5 15/64“ - 57/64“ 8.0 – 5/16“ 09008H


>3mm

>1mm

>3mm

>1mm

3-6mm

>6mm

>3mm

>1,15mm

3-6mm

3-10mm

Original Astroflex® – Sabre Saw Blades

For Rockwell, Makita, Black & Decker, Bosch, Holz-Her, Atlas Copco, Rems, Roller, Mil-waukee, Hilti and others.■ A new range of sabre saw blades with improved cutting performance and precision ground teeth. Cobalt alloyed teeth.■The HSS-Bi-Metal blade is almost unbreakable and suitable for all materials and applications.■This sabre saw blade stands for highest quality and durability.

For Metal

Application Range Material thickness Steel- Length Length Width Thickness Teeth AlfraMetal processing in mm Quality mm inch inch Prod.-No.

Metal processing; soft metalscopper-, aluminium-, brass-cables, wires and pipes HSS-Bi 100 mm 4“ 16 mm 0.9 mm 14 30255

Metal processing; soft metalscopper-, aluminium-, brass-cables, wires and pipes HSS-Bi 100 mm 4“ 16 mm 0.9 mm 18 30256

All kind of metals, stainless steelsteel pipes, cast iron, alloys, etc. HSS-Bi 150 mm 6“ 16 mm 0.9 mm 14 30259

All kind of metals, stainless steel steel pipes, cast iron, alloys, etc. HSS-Bi 150 mm 6“ 16 mm 0.9 mm 18 30260

All kind of metals, stainless steel 10/14steel pipes, cast iron, alloys, etc. HSS-Bi 150 mm 6“ 16 mm 0.9 mm Combo 30262




All kind of metals, stainless steel 10/14steel pipes, cast iron, alloys, etc. HSS-Bi 200 mm 8“ 16 mm 0.9 mm Combo 30266

Special Sabre Saw Blade flexible type 10/14for cast iron- and steel pipes HSS-Bi 290 mm 12“ 16 mm 0.9 mm Combo 30272

For Wood

Special Sabre Saw Blade for Wood with nails, especially for the refurbishing HSS-Bi 150 mm 6“ 16 mm 1.2 mm 6 30285

Special Sabre Saw Blade for Wood 4/6- curved cuts - HSS-Bi 150 mm 6“ 16 mm 1.2 mm Combo 30286

Special Sabre Saw Blade for Wood - Refurbishing - HSS-Bi 210 mm 8“ 16 mm 1.2 mm 6 30287

Special Sabre Saw Blade for Wood - Refurbishing - HSS-Bi 290 mm 12“ 16 mm 1.2 mm 6 30288


ALFRA – Hand Hacksaw Blades

HSS-SS-flexible■ Flexible saw blades with broad range of application.■ Corrugated saw blades suitable for thin profiles and pipes.■ Crossed saw blades suitable for thicker profiles and solid materials.

HSS-Bi-Metal■The safety saw blade■Unbreakable■Excellent cutting performance due to HSS-blade.

Quality Teeth/Inch Prod.-No.

HSS-flexible gold 18 Z crossed 33001 24 Z crossed 33003

HSS-Bi-Metal 24 Z corrugated 33002

Customer brand execution in color, imprint packaging as from 5000 pieces possible. OEM available. Ask for details.

VE: 100 pieces

For Power Hacksaw machines■You can use the efficiency of the whole machine with these machine saw blades.■ For sawing solid material, pipes and profiles of all strengths.■ Also for high-strength steels■ With parabolic tooth against early break■ Sharp-edged and wear-resistant, with fine carbide repartition in micro structure■ Straightened by master hand■ For all types of machines

OEM available. Ask for details.

Dimension mm available toothing tpt Prod.-No.

300 x 25 x 1.5 8 10 14 33010350 x 30 x 1.5 6 8 10 14 33011350 x 30 x 2.0 4 6 8 10 33012400 x 30 x 1.5 6 8 10 14 18 33013400 x 30 x 2.0 4 6 8 10 33014450 x 30 x 2.0 4 6 8 10 33015450 x 35 x 2.0 4 6 8 10 33016450 x 40 x 2.0K 4 6 8 10 33017500 x 40 x 2.0 4 6 8 10 33018575 x 50 x 2.5K 3 4 6 33019650 x 55 x 2.5K 3 4 6 33020700 x 55 x 2.5K 3 4 6 33021

Prod.-No. 33...K = Kasto with displaced side holesOther dimensions and toothings on request. Length measured from hole center to center.Packaging unit: 10 pieces

ALFRA Power Hacksaw Blades – HSS DM O5


drilling – punching – cutting – deburring · double-acting page 49 hydraulic pumps page 47-...

Documents