drilling & tapping products - hydratight · 2018-07-03 · ddu2448 ( 24 in. – 48 in.) od...
TRANSCRIPT
Drilling & Tapping Products
DDU1636 ( 6 in. – 36 in.) OD Mounting
Casing Pin Drill
RANGE
Minimum pipe diameter 152mm 6”
Maximum pipe diameter 915mm 36”
Minimum Clamping diameter 405mm 16”
Maximum Clamping diameter 915mm 36”
Min. / Max. Pin diameters (4” standard ) 100mm / 4” 305mm / 12”
Cutting stroke 400mm 16”
R.P.M Min: 10 Max: 60
Drive – hydraulic @ 1050 p.s.i (7 bar) 5.0 Hp 3.73 Kw
Hydraulic supply required (max. power) 50 L/min 10 gal/min
FEED RATES
Advance manual Feed rate /per rev 4mm 0.157”
WEIGHTS AND DIMENSIONS
Machine weight 472 kg 1038 lbs
Shipping weight 572 Kg 1258 lbs
Shipping dimensions 2
boxes ea.
L 148cm -
(58”)
W 173cm
(68”)
H 79cm
(31”)
A casing drilling unit for creating all lift pin holes in a single
operation. Used in conjunction with the band saw to provide a very
efficient method of cutting and decommissioning pipeline,
conductors, caissons and multiple grouted strings.
DDU2448 ( 24 in. – 48 in.) OD Mounting
Casing Pin Drill
A casing drilling unit for creating all lift pin holes in a single
operation. Used in conjunction with the band saw to provide a very
efficient method of cutting and decommissioning pipeline,
conductors, caissons and multiple grouted strings.
RANGE
Minimum cut pipe diameter 610mm 24”
Maximum cut pipe diameter 1220mm 48”
Minimum Clamping diameter 610mm 24”
Maximum Clamping diameter 1220mm 48”
Min. / Max. Pin diameters (4” standard ) 100mm / 4” 305mm / 12”
Cutting stroke 405mm 16”
R.P.M Min: 10 Max: 60
Drive – hydraulic @ 1050 p.s.i (7 bar) 5.0 Hp 3.73 Kw
Hydraulic supply required (max. power) 50 L/min 10 gal/min
FEED RATES
Advance manual Feed rate / per rev 4mm 0.157”
WEIGHTS AND DIMENSIONS
Machine weight 802 kg 17654 lbs
Shipping weight 1005 Kg 2211 lbs
Shipping dimensions L 290cm - (114”) W 125cm (49”) H 45cm (17”)
DDU3656 ( 36 in. – 56 in.) OD Mounting
Casing Pin Drill
A casing drilling unit for all lift pinning operations. Used in
conjunction with the band saw to provide a very efficient
method of cutting and decommissioning pipeline, conductors,
caissons and multiple grouted strings.
RANGE
Minimum cut pipe diameter 610mm 24”
Maximum cut pipe diameter 1425mm 56”
Minimum Clamping diameter 915mm 36”
Maximum Clamping diameter 1425mm 56”
Min. / Max. Pin diameters (4” standard ) 100mm / 4” 305mm / 12”
Cutting stroke 405mm 16”
R.P.M Min: 10 Max: 60
Drive – hydraulic @ 1050 p.s.i (7 bar) 5.0 Hp 3.73 Kw
Hydraulic supply required (max. power) 50 L/min 10 gal/min
FEED RATES
Advance manual Feed rate / revolution 4mm 0.157”
WEIGHTS AND DIMENSIONS
Machine weight 602 kg 1324 lbs
Shipping weight 654 Kg 1438 lbs
Shipping dimensions L - 290cm - (114”) W- 125cm (49”) H- 45cm (17”)
HT20 (12 in. Stroke – 2 in.) Portable Drilling
A versatile portable drilling and boring machine for general
drilling and stud removal applications. The machine can be
bolted directly to the work piece or have our new optional
switch magnet base.
TECHNICAL DETAILS
Maximum Hole diameter (through base) 50mm 2”
Standard stroke 305mm 12”
Maximum stroke available (optional) 500mm 20”
R.P.M standard Min: 15 Max: 100
Drive – Pneumatic @ 6 bar (90 p.s.i) 4.0 Hp 3.0 Kw
Drive – Hydraulic @ 70 bar (1050 p.s.i) 5.0 Hp 3.7 Kw
Feed – Pneumatic @ 6 bar (90 p.s.i) 1.5 Hp 1.11 Kw
Feed – hydraulic @ 70 bar (1050 p.s.i) 2.2 Hp 1.64 Kw
Air consumption required 98 s.c.f.m 2.69 m3/m
Hydraulic supply required 50 L/min 13 gal/min
FEED RATES
Hand feed (Feed / revolution) 2.5mm 0.100”
Variable auto feed (optional) 0 – 32 mm/min 0 – 1.25”/min
WEIGHTS AND DIMENSIONS
Machine weight (including 10kg auto feed) 43 kgs 95 lbs
Shipping weight 60 Kgs 132 lbs
Shipping dimensions L - 76cm - (30”) W- 28cm (11”) H- 28cm (11”)
HT20 (12 in. Stroke – 2 in.) Accessories
HT20-6 (qty 2) A fast set mounting
system featuring switch magnet mounts
for the Hydratight drilling and tapping
machines. The magnets will fix the
machines to any steel surface and
provide a means of fixing that requires
no change to the work piece (ea. 26 lbs,
12 kg)
HT50-8A A fast set pipe mounting
system for drilling machines. The pipe
clamp will provide a solid mounting
structure for the machines to any
diameter pipe from 3 – 36” on any
surface steel surface and provide a
means of fixing that requires no change
to the work piece (26 lbs, 12 kg)
HT30VF (12 in. Stroke – 3 in.) Portable Drilling
A versatile portable drilling and boring machine for heavy
duty drilling and stud removal applications. The machine
can be bolted directly to the work piece or have our new
optional switch magnet base.
TECHNICAL DATA
Maximum Hole diameter (through base) 70mm 2.75”
Standard stroke 305mm 12”
Maximum stroke available (optional) 610mm 24”
R.P.M – air 3.5hp or 5.0hp hydraulic Min: 15 Max: 74
Drive – Pneumatic @ 6 bar (90 p.s.i) 2.0 Hp 1.49 Kw
Drive – Hydraulic @ 70 bar (1050 p.s.i) 5.0 Hp 3.73 Kw
Feed – Pneumatic @ 6 bar (90 p.s.i) 0.9 Hp 0.67 Kw
Feed – hydraulic @ 70 bar (1050 p.s.i) 2.2 Hp 1.64 Kw
Air consumption required 98 s.c.f.m 2.69 m3/m
Hydraulic supply required 40 L/min 8.8 gal/min
FEED RATES
Hand feed (Feed / revolution) 2.5mm 0.100”
Variable auto feed (optional) 0 – 20 mm/min 0 - 0.75”/min
WEIGHTS AND DIMENSIONS
Machine weight (including 10kg auto feed) 54 kgs 118 lbs
Shipping weight 82 Kgs 180 lbs
Shipping dimensions L 112cm - (44”) W 44cm (17”) H 51cm (20”)
HT40 (16 in. Stroke – 4 in.) Portable Drilling
A versatile portable drilling and boring machine for general
drilling and stud removal applications. The machine can be
bolted directly to the work piece or have our new optional
switch magnet base.
TECHNICAL DATA
Maximum Hole diameter (through base) 100mm 4”
Standard stroke 405mm 16”
Maximum stroke available (optional) 800mm 31.5”
R.P.M – standard Min: 5 Max: 60
Drive – Pneumatic @ 6 bar (90 p.s.i) 3.0 Kw 4.0 Hp
Drive – Hydraulic @ 70 bar (1050 p.s.i) 3.7 Kw 5.0 Hp
Feed – Pneumatic @ 6 bar (90 p.s.i) 1.1 Kw 1.5 Hp
Feed – hydraulic @ 70 bar (1050 p.s.i) 1.6 Kw 2.2 Hp
Air consumption required 2.7 m3/m 98 scfm
Hydraulic supply required 50 L/min 13 gal/min
FEED RATES
Hand feed (Feed / revolution) 2.5mm 0.100”
Variable auto feed (optional) 0 – 32 mm/min 0 – 1.25”/min
WEIGHTS AND DIMENSIONS
Machine weight (including 10kg auto feed) 52 kgs 114 lbs
Shipping weight 81 Kgs 178 lbs
Shipping Dims L - 104cm - (40”) W- 39cm (14”) H- 44cm (17”)
HT40-5 (qty 2) A fast set mounting
system featuring switch magnet mounts
for the Hydratight drilling and tapping
machines. The magnets will fix the
machines to any steel surface and
provide a means of fixing that requires
no change to the work piece (ea. 26 lbs,
12 kg)
HT40 (16 in. Stroke – 4 in.) Accessories
HT50-8A A fast set pipe mounting
system for drilling machines. The pipe
clamp will provide a solid mounting
structure for the machines to any
diameter pipe from 3 – 36” on any
surface steel surface and provide a
means of fixing that requires no change
to the work piece (26 lbs, 12 kg)
HT50 (16 in. Stroke – 5 in.) Portable Drilling
TECHNICAL DATA
Maximum Hole diameter (through base) 125mm 5”
Standard stroke 405mm 16”
Maximum stroke available (optional) 800mm 31.5”
R.P.M – standard Min: 5 Max: 60
Drive – Pneumatic @ 6 bar (90 p.s.i) 4.0 Hp 3.0 Kw
Drive – Hydraulic @ 70 bar (1050 p.s.i) 5.0 Hp 3.7 Kw
Feed – Pneumatic @ 6 bar (90 p.s.i) 1.5 Hp 1.11 Kw
Feed – hydraulic @ 70 bar (1050 p.s.i) 2.2 Hp 1.64 Kw
Air consumption required 98 s.c.f.m 2.69 m3/m
Hydraulic supply required 50 L/min 13 gal/min
FEED RATES
Hand feed (Feed / revolution) 2.5mm 0.100”
Variable auto feed (optional) 0 – 32 mm/min 0 - 1.25”/min
WEIGHTS AND DIMENSIONS
Machine weight (including 10kg auto feed) 98 kgs 216 lbs
Shipping weight 127 Kgs 279 lbs
Shipping dimensions L - 110cm - (43”) W- 40cm (16”) H- 49cm (19”)
HT50-6 (qty 2) A fast set mounting
system featuring switch magnet mounts
for the Hydratight drilling and tapping
machines. The magnets will fix the
machines to any steel surface and
provide a means of fixing that requires
no change to the work piece (ea. 26 lbs,
12 kg)
HT50 (16 in. Stroke – 5 in.) Accessories
HT50-8A A fast set pipe mounting
system for drilling machines. The pipe
clamp will provide a solid mounting
structure for the machines to any
diameter pipe from 3 – 36” on any
surface steel surface and provide a
means of fixing that requires no change
to the work piece (26 lbs, 12 kg)
HT60VF (17 in. Stroke – 5 in.) Portable Drilling
TECHNICAL DATA
Maximum Hole diameter (through base) 152mm 6”
Standard stroke 450mm 17”
Maximum stroke available (optional) 610mm 24”
R.P.M – standard Min: 5 Max: 60
Drive – Pneumatic @ 6 bar (90 p.s.i) 4.0 Hp 3.0 Kw
Drive – Hydraulic @ 70 bar (1050 p.s.i) 5.0 Hp 3.7 Kw
Feed – Pneumatic @ 6 bar (90 p.s.i) 1.5 Hp 1.11 Kw
Feed – hydraulic @ 70 bar (1050 p.s.i) 2.2 Hp 1.64 Kw
Air consumption required 98 s.c.f.m 2.69 m3/m
Hydraulic supply required 50 L/min 13 gal/min
FEED RATES
Hand feed (Feed / revolution) 2.5mm 0.100”
Variable auto feed (optional) 0 – 32 mm/min 0 – 1.25”/min
WEIGHTS AND DIMENSIONS
Machine weight (including 10kg auto feed) 87 kgs 191 lbs
Shipping weight 123 Kgs 270 lbs
Shipping dimensions L - 115cm - (45”) W- 42cm (16”) H- 50cm (20”)
T30 (12 in. Stroke – 3 in.) Tapping Machine
TECHNICAL DETAILS
Maximum tapping (without nose bush) 76mm 3”
Maximum diameter through nose bush 70mm 2.75”
Location diameter (nose bush) 80mm 3.149”
Clamping holes 3 off 10.5 thro’ - PCD 115mm 4.528”
Standard Stroke 305mm 12”
R.P.M Min: 1 Max: 11
Drive – Hydraulic @ 70 bar (1050 p.s.i) 5.0 Hp 3.7 Kw
Hydraulic Supply required 40 L/min 10 gal/min
WEIGHTS AND DIMENSIONS
Machine weight 40 kgs 88 lbs
Shipping weight 67 Kgs 147 lbs
Shipping dimensions L – 87cm - (34”) W- 37cm (15”) H- 35cm (14”)
A portable lightweight heavy duty tapping machine for all
general purpose on site tapping and flange stud tapping.
T725 (13 in. Stroke – 7.25 in.) Tapping Machines
A portable lightweight heavy duty tapping machine for all
general purpose on site tapping and flange stud tapping.
TECHNICAL DETAILS
Maximum tapping without nose bush 184mm 7.25”
Maximum diameter through nose bush 178mm 7.0”
Location diameter 185mm 7.28”
Clamping holes 4 off 12.7 thro’ - PCD 150mm 5.905”
Standard Stroke 330mm 13”
R.P.M Min: 1 Max: 11
Drive – Hydraulic @ 70 bar (1050 p.s.i) 5.0 Hp 3.7 Kw
Hydraulic Supply required 40 L/min 10 gal/min
WEIGHTS AND DIMENSIONS
Machine weight 147 kgs 323 lbs
Shipping weight 205 Kgs 451 lbs
Shipping dimensions L – 82cm - (33”) W- 59cm (24”) H- 60cm (24”)