DINAM SPECIFICATION

Page: 1/6

PRODUCTS SPECIFICATION

5050 SMD LED FLEX STRIP :( DC12V)

(Dropper series)

For DN-F5050X30/60-F2

Dinam LED Limited

Web: www.dinamled.com

Email: info@dinamled.com

Contact: Luisa

Tel: +86-755-23063529

Fax: +86-755-22700020

Mobile: +86-13600151478

Mobile: +86-13560459594

Address: B Building, Chuangfu Industrial Zone, Beihuan Road,

Shiyan Town, Baoan District, Shenzhen, China.

DINAM SPECIFICATION

Page: 2/6

5050 SMD FLEXIBLE STRIP introduction Features:

Available in 12V DC maximum

Very bright & low power consumption

Operating temperature: -20°~50 °

Long life span LED lights, more than 50,000 hours+.

Adhesive back, peel& stick!

Dedicated controller (DC12)

Water-proof, IP62.

Applications: Ideal for sign letters and channel letters, concealed lights, room lighting, equipment.

DINAM SPECIFICATION

Page: 3/6

Assembly drawing

View Angle: 120degrees

Operation Temperature:-20℃~50℃

Store Temperature:-30℃~80℃

Package: 5 meter strip in one reel, one reel in one anti-Static bag, 25 bags put into one carton.

DINAM SPECIFICATION

Page: 4/6

5050 Dropper series: 30/60LED/Meter

This flexible strip is made of 5050(3in1) LED; the PCB holder is Dropper strip.

Part number Color D LED QTY/meter Lumen/meter Voltage Power/meter Packing means

Red 100mm 60

Green 100mm 120

Blue 100mm 75

DN-F5050R30-F2 Red 100mm 30 180 DC12V 7.2 watt 5Meter/reel

DN-F5050Y30-F2 Yellow 100mm 30 180 DC12V 7.2 watt 5Meter/reel

DN-F5050B30-F2 Blue 100mm 30 225 DC12V 7.2 watt 5Meter/reel

DN-F5050G30-F2 Green 100mm 30 360 DC12V 7.2 watt 5Meter/reel

DN-F5050W30-F2 white 100mm 30 300~480 DC12V 7.2 watt 5Meter/reel

DN-F5050WW30-F2 warm White 100mm 30 240~420 DC12V 7.2 watt 5Meter/reel

DN-F5050P30-F2 Pink 100mm 30 180 DC12V 7.2 watt 5Meter/reel

Part number Color D LED QTY/meter Lumen/meter Voltage Power/meter Packing means

Red 50mm 120

Green 50mm 240

Blue 50mm 150

DN-F5050R60-F2 Red 50mm 60 360 DC12V 14.4 watt 5Meter/reel

DN-F5050Y60-F2 Yellow 50mm 60 360 DC12V 14.4 watt 5Meter/reel

DN-F5050B60-F2 Blue 50mm 60 450 DC12V 14.4 watt 5Meter/reel

DN-F5050G60-F2 Green 50mm 60 720 DC12V 14.4 watt 5Meter/reel

DN-F5050W60-F2 White 50mm 60 600~960 DC12V 14.4 watt 5Meter/reel

DN-F5050WW60-F2 Warn white 50mm 60 480~840 DC12V 14.4 watt 5Meter/reel

DN-F5050P60-F2 Pink 50mm 60 360 DC12V 14.4 watt 5Meter/reel

Dropper series : 5050 30LED/meter

Dropper series : 5050 60LED/meter

DN-F5050RGB30-F2 7.2 wattDC12V

5Meter/reelDN-F5050RGB60-F2 60 DC12V 14.4 watt

5Meter/reel30

DINAM SPECIFICATION

Page: 5/6

DINAM SPECIFICATION

Page: 6/6

How to connect flexible strip

Below shows you how to connect the flexible strip (single color) to power supplies.

Marks:

1. Maximum 5meter/link/loop.

2. Better to supply the power through both

of the each link.

3. Flexible strip should be installed in a

proportional spacing to evenly.

4. Power supply should be DC 12V.

5. Be sure the positive and negative are not

reversed.

Marks:

1. Maximum 5meter/link/loop.

2. Better to supply the power through

both of the each link.

3. Flexible strip should be installed in a

proportional spacing to evenly.

4. Power supply should be DC 12V.

5. Be sure the positive and negative are

not reversed.

Below shows you how to connect the flexible strip (RGB) to power supplies.

Note:

Please notice that, the LED strips should not be used in sealed or hot place, to make sure the heat

emitting is good for the LEDs.