drymode - suria soluciones interiores...- hotels and resorts - insulation and industrial service -...

1 1

DryModeSimply install tiles dry

Concepts

Products

Service

2

��

Building newsolutions.

Choosing Lindner you have:Lindner Concepts:Tailored solutions specifically geared to satisfy individual project requirements

Lindner Products:Quality materials and systems to the very highest industry standards

Lindner Service:Comprehensive project management services

Lindner undertakes major projects worldwide in all areas of interior fit-out, insulation technology,industrial services and building facades. Frompre-planning through to project completion Lindneris your partner of choice.

The Company’s extensive manufacturing capabilityenables quality to be strictly maintained whilstallowing maximum flexibility to meet individualproject requirements.

Environmental considerations are fundamental to allLindner’s business principles.

Through partnerships with clients Lindner turnsconcepts into reality.

2 3

Your advantages at first sight- Secure planning with design freedom- Significant reduction of the construction period- Dry installation of large format tiles- No use of primer and adhesive- Ergonomic and dust-free working- Easy replacement of tiles- Covering completely removable

Main photo: ADAC Zentrale München© Xaver Lockau

Dry design and installation: the best way to achieve the perfect result

DryMode changes the current frame conditions for stone covering works and enables an up to 50 % faster and dust-free laying of the tiles with its new technology. Further advantages are an automatic alignment of the joint pattern as well as a continuous and effective decoupling from the substrate – without using any primer and adhesive!DryMode is especially developed for optimizing the installation of ceramic floors. For this purpose, a decoupling layer made of cork is connected to a ceramic tile of every size in order to create a precisely processed dry tile which can immediately be installed without further preparation on a level substrate, ideally on FLOOR and more® hollow floors.

DryMode

4

Advantages 5Application and technology 6 Overview of technical characteristics of DryMode 9Product lines Ardesa 11 Attuale 13 Braveheart 15 Casa 17 Definita 19 Dimessa 21 Giura 23 Marmo 25 Pari 27 Rena 29 Tenero 31 Travertino 33

Contents

4 5

For architects & designersSecure planning with design freedomWith DryMode, floor covering works are consider-ably easier to plan in terms of result and process. The surface is already loadable one day after the dry installation of the tiles.

Dry installation of large format tilesThe DryMode technology is the perfect method to install large format floor tiles on a level substrate such as FLOOR and more®. Neither a particular preparation of the ground nor further priming are necessary for its installation. In addition, there is no need of additional decoupling mats.

For craftsmenErgonomic and dust-free workingThe DryMode installation technology with its prefa-bricated tiles automatically forms an accurate 3 mm wide joint pattern thanks to the surrounding cork edge. Therefore, the installation can be carried out a lot more ergonomically and faster without producing dust and humidity.

No use of primer and adhesiveDryMode does not need any adhesive and primer in order to achieve a step-safe result. The tiles are only

grouted.

For owners & tenantsSignificant reduction of the construction timeDryMode is a dry installation system shortening the laying time by up to 50 % compared with the conventional floor tile installation method.

Covering completely removableThe tiles can be removed quickly and easily, free of residues and with little dust formation in situations of relocation, change of tenants or change of use - without damaging the substrate.

Easy replacement of tilesOnce a single tile has been damaged it can be replaced within minutes without any drying time. Simply expose and remove the damaged tile, install a new tile and grout it.

Advantages

6

LevelnessThe floor system FLOOR and more® offers the best conditions for DryMode as it is installed exactly on height on its adjustable steel pedestals.

Determination of the joint gridEvery usual joint grid is possible with the DryMode installation technology. A system joint with a width of 3 mm is automatically formed by tightly joining together the cork edges.

Application and technology

6 7

Grouting of the tilesThe installed DryMode tiles are grouted with a cement-based grouting compound. The surface is accessible after 12 to 24 hours (final hardness after four to five days).

Applicable everywhereOffice and administration buildings, store and exhibition stand construction, museums, exhibition rooms, schools, kindergartens, retirement homes, hotels, atria and shopping malls.

8 9

Overview of technical characteristics of DryMode- Acoustic and constructive decoupling from the substrate (impact sound improvement of 13 to 18 dB)- Walking-elastic bedding of the tiles with the patented decoupling backing- Emission and dust-free installation in favor of a clean ambient air- Ergonomic and low-risk installation of large format tiles- Removable at any time in case of a change in use or a subsequent installation

Ceramic tile from the DryMode collection

Decoupling layer with 1.5 mm cork frame sintered to the bottom side of the ceramic tile

System joint with a width of 3 mm, automatically created by the surrounding cork edge

1

2

3

1

2

3

10 11

bianco brizzolata bronzo

Tested qualityPanel thickness approx. 12.5 mm with a 60 x 60 cm format

Abrasion Class 5

Water absorptionmax. 0.1 % ISO 10545.3

Slip resistancedry wetR12 - DIN 51130

- A+B DIN 51097

0.91 0.69 ASTM C1028

0.81 0.62 BCRA

Recycled content up to 40 %

Chemical resistanceGA UNI EN ISO 10545.13

5 UNI EN ISO 10545.14

Impact sound improvementup to 18 dB

Fire resistance classBfl-s1 EN 13501

Ardesa

12 13

crema argenteria grigio

neroantracite

bianco

Panel thickness approx. 12.5 mmwith a 60.8 x 60.8 cm format

AbrasionClass 5


Recycled contentup to 40 %


5 UNI EN ISO 10545.14



Tested quality

Attuale


- A+B DIN 51097

0.91 0.69 ASTM C1028

0.81 0.62 BCRA

14 15

pearl grey earh

coke

gypsum

Panel thicknessapprox. 12.5 mmwith a 60 x 60 cm format

Abrasion Class 5

Water absorptionmax. 0.1 % ISO 10545-3



5 UNI EN ISO 10545.14



Tested quality

Braveheart


16 17

avorio brizzolata bruno nero

Tested qualityPanel thicknessapprox. 12.0 mmwith a 60 x 60 cm format

Abrasion Class 4




5 UNI EN ISO 10545.14



Casa


18 19

grigio

bruno marrone antracite nero

crema aureo brizzolata


AbrasionClass 6


Chemical resistanceUA UNI EN ISO 10545.13

5 UNI EN ISO 10545.14




Definita


20 21

bianco ocra

bruno antracite marrone nero

grigio crema


Abrasion Class 6


Chemical resistancemin. UB UNI EN ISO 10545.13

min. 3 UNI EN ISO 10545.14




Dimessa


22 23

Tested qualityPanel thicknessapprox. 13.0 mm with a 50 x 50 cm format

AbrasionClass 5

Water absorption max. 0.5 % ISO 10545.3


5 UNI EN ISO 10545.14




Giura


24 25


AbrasionClass 5



5 UNI EN ISO 10545.14




Marmo


26 27

crema noce grigio antracite


Abrasion Class 6


Chemical resistanceUA UNI EN ISO 10545.13

ULC UNI EN ISO 10545.13

UHC UNI EN ISO 10545.13




Pari


28 29

avorio aureo grigio ocra

bruno


AbrasionClass 5



5 UNI EN ISO 10545.14




Rena


30 31

bianco crema bruno antracite

marrone nero

Tested qualityPanel thickness approx. 13.0 mmwith a 60 x 60 cm format

Abrasion Class 4



4 UNI EN ISO 10545.14




Tenero


32 33


Abrasion Class 4



5 UNI EN ISO 10545.14




Travertino


TU

_B_D

RY

/E/1

.0

Lindner Group

Bahnhofstrasse 2994424 ArnstorfGermanyPhone +49 8723 20-3682Fax +49 8723 [email protected]

This document is the intellectual property of Lindner, Arnstorf (Germany). All the information contained in this brochure agrees with the information available at the time of its printing and only serves as advance information. Any possible colour deviations there might be from the original product are caused by printing-related reasons. Lindner is the sole and exclusive owner of the copyrights as well as the ancillary copyright. All use, and in particular any distribution, reprinting, exploitation or adaptation of this document shall only be allowed with express, written approval by Lindner.

Lindner Concepts:

- Airports and Railways- Clean Rooms and Operating Theatres- Cruise Liner and Ship Fit-out- General Contracting- Hotels and Resorts- Insulation and Industrial Service- Interior Fit-out and Furnishings- Special-Purpose Constructions and Stadiums- Studios and Concert Halls- System Buildings

Lindner Products:

- Ceiling Systems- Doors- Dry Lining Systems- Facades- Floor Systems- Heating and Cooling Technologies- Lights and Lighting Systems- Partition Systems- Roofing Systems- Steel & Glass

Lindner Service:

- Clearance of Harmful Substances- Construction Management and Project Development- Deconstruction and Interior Demolition- General Planning- Global Product Supplies- Green Building- Industrial Scaffolding- Installation and Building Services- Research and Development

We can do it all for you.

drymode - suria soluciones interiores...- hotels and resorts - insulation and industrial service -...

Documents