DSE6110/20AUTO START & AUTO MAINS FAILURECONTROL MODULES

DSEGenset

®

1ph2ph3phN

1ph2ph3ph

1ph2ph3phN

6 4

PC

VOLTS

3

++

DEUTZISUZUPERKINSCATERPILLARMTUVOLVOCUMMINSSCANIA

D +W/L

GENERATOR SENSING

VOLTSCURRENT

USBPORT

CONFIGURABLEINPUTS

DC OUTPUTS ANALOGUESENDERS

EMERGENCY STOP

DC POWER SUPPLY 8-35V

ELECTRONICENGINES ORMAGNETIC PICK-UP

FUEL & CRANKOUTPUTS(Flexible with CAN)

CHARGEALTERNATOR

MAINS (UTILITY) SENSINGDSE6120 ONLY

ISSUE 2

+

1 1

DC OUTPUTS

+

COMPREHENSIVE FEATURE LIST TO SUIT AWIDE VARIETY OF GEN-SET APPLICATIONS

7

OTHER

DSE6110/20

The DSE6110 is an Auto StartControl Module and the DSE6120is an Auto Mains (Utility) FailureControl Module suitable for a widevariety of single gen-setapplications.

Monitoring speed, frequency,voltage, current, oil pressure,coolant temperature and fuel level,the modules will display warnings,shutdown and engine statusinformation on the back-lit LCDscreen and illuminated LED.

Both modules offer electronic(CAN) and non-electronic (magneticpick-up/alternator sensing) engineversions and offer a number offlexible inputs, outputs and engineprotections so the system can beeasily adapted to suit a wide rangeof application demands.

The modules can be easilyconfigured using the DSEConfiguration Suite PC software.Selected front panel editing is alsoavailable.

FEATURES

ENVIRONMENTAL TESTING STANDARDS

ELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment

ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment

TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oC

VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn

HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 oC@ 93% RH 48 Hours

SHOCKBS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS

DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the optional sealing gasket.

DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL sales@deepseaplc.com WEBSITE www.deepseaplc.com

DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL sales@deepseausa.com WEBSITE www.deepseausa.com

Registered in England & Wales No.01319649VAT No.316923457

055-069/10/11 (4)

KEY FEATURES• Back-lit text LCD display• Front panel editing• LED and LCD alarm indication• Power Save mode• CAN and Magnetic Pick-up/Alt.

versions available (specify onordering)

• PC and front panelconfiguration

• 6 Digital inputs• 3 Analogue inputs• 6 Outputs (4 configurable on

Magnetic Pick-up/Alt., 6configurable on CAN version)

• Configurable timers and alarms• Alternative configuration • Event Log (10)• Remote Start input• 3 Phase generator monitoring

• Current Monitoring and protection• 3 Phase Mains (Utility)

monitoring (DSE6120 only)• Test button (DSE6120 only)• Battery voltage monitoring• Engine pre-heat• Hours counter• Comprehensive shutdown or

warning on fault condition

KEY BENEFITS• Automatically transfers between

mains (utility) and generatorpower (DSE6120 only)

• Hours counter provides accurateinformation for monitoring andmaintenance periods

• User-friendly set-up and buttonlayout

• Multiple engine parameters aremonitored simultaneously

• Module can be configured tosuit individual applications

• Compatible with a wide rangeof CAN engines

• Tier 4 engine support• Uses DSE Configuration Suite

PC software for simplifiedconfiguration

• IP65 rating (with optionalgasket) offers increasedresistance to water ingress

• Licence-free PC software

RELATED MATERIALSTITLE PART NO’SDSE6110 Installation Instructions 053-059DSE6120 Installation Instructions 053-060DSE6100 Quick Start Guide 057-102DSE6100 Operator Manual 057-095DSE6100 Configuration Suite PC Manual 057-096

SPECIFICATION

DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V Continuous

CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT178 mA at 12 V, 95 mA at 24 V

MAXIMUM STANDBY CURRENT88 mA at 12 V, 50 mA at 24 V

CHARGE FAIL/EXCITATION RANGE0 V to 35 V

MAINS (UTILITY) DSE6120 ONLYVOLTAGE RANGE15 V - 333 V AC (L-N)

FREQUENCY RANGE3.5 Hz to 75 Hz

OUTPUTSOUTPUT A (FUEL)2 A DC at supply voltage

OUTPUT B (START)2 A DC at supply voltage

AUXILIARY OUTPUTS C,D,E & F2 A DC at supply voltage

GENERATORVOLTAGE RANGE 15 V - 333 V AC (L-N)

FREQUENCY RANGE3.5 Hz to 75 Hz

MAGNETIC PICK UPVOLTAGE RANGE+/- 0.5 V to 70 V

FREQUENCY RANGE10,000 Hz (max)

DIMENSIONSOVERALL215 mm x 158 mm x 42 mm 8.5” x 6.2” x 1.6”

PANEL CUT-OUT182 mm x 137 mm7.2” x 5.4”

MAXIMUM PANEL THICKNESS8 mm0.3”

STORAGE TEMPERATURE RANGE-40 oC to +85 oC

DSE6110/20AUTO START & AUTO MAINS FAILURECONTROL MODULES

®

DSEGenset

DSE6110

DSE6120

Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.

FEATURES