Automatic Syringe Filling and Closing Machine

Innovative Designs

DSF-70/120

Specification subject to change without notice.All rights reserved. The copying of technical data and images is forbidden. © Copyright Dabrico, Inc.

Main Technical Features

PRODUCT CAPABILITIES:Nested Syringes, Glass, Plastic

The information given on this data sheet is accurate as for the date of issue. Nothing herein shall be deemed to constitute a warranty, explicitly or implicitly. It is the user’s responsibility to determine the applicability and suitability of such material to any particular purpose.

1555 Commerce Drive, Bourbonnais, IL 60914 USATel: 815-939-0580 Fax: 815-939-7798

www.dabrico.com sales@dabrico.com

• Stainless steel machine frame• 2 individually programmable piston pumps• Polycarbonate enclosure• Rubber plunger/stopper insertion station• Programmable servo-driven X-Y-Z axis syringe nest carrier and

positioning table• Frequency controlled motor• Nema 4X rated color touch screen• HMI and PLC with ethernet capabilities• Rubber plunger/stopper control sensor• Servo driven work station• Piston or peristaltic pump (± 0.5 -1.0 % accuracy)• SERVO/SERVO/SERVO & SERVO-driven piston pump; will increase

output from 50-60 to 60-70 for up to 2ml dispense

AVAILABLE OPTIONS• Vacuum filling syringe format: in nest• Vacuum stoppering syringe format: in nest / stopper format: in bulk• 5 head filling and closing configuration• VHP/ CIP compatible• Automatic fill check sampling• Fully automatic nest carrier indexing platform with

horizontal servo-driven X-Y axis (extended to move nest carrier to exit edge of enclosure and back into position for filling and stopper insertion stations).

• Robotic pick and place lifting device unit to automatically load nested syringes onto any model DSF syringe filler nest indexing carrier from tub loading station

• Pre & post gassing/flushing• Isolator and RABS technology• Laminer flow cabinet

TECHNICAL SPECIFICATIONSDSF-70

Production rate: 70 parts per minutePosition (X-Y-Z): SERVO - SERVO - SERVONet weight: 450 LBS.Dimensions (LxWxH): 48”/1219mm x 36”/914mm x 72”/1829mmElectrical: 120V, 50-60 HzLead time: 4-6 months

DSF-120Production rate: 120 parts per minutePosition (X-Y-Z): SERVO - SERVO - SERVONet weight: 650 LBS.Dimensions (LxWxH): 48”/1219mm x 36”/914mm x 72”/1829mmElectrical: 120V, 50-60 HzLead time: 6-8 months

The Dabrico Syringe Filler (DSF) is a fully automatic servo-driven liquid dispensing system with stopper placement capabilities. The system is designed for BD Hypak® or similar nested syringes (1ml to 10ml Glass or Plastic) with rates up to 70/120 parts per minute dependant on fill volume and fluid viscosity.