Code No. 0816644Rev. 1 (10/12)

INSTALLATION INSTRUCTIONS SINGLE, DOUBLE, TRIPLE STATION

DESIGNER SERIESSOLID SURFACE LAVATORY SYSTEMS

DSOF-80000/DSG-80000/DSWD-80000/DSCT-80000 SeriesSingle/Double/Triple Station Solid Surface Lavatory Sink Systems

DSWD-81000 Designer Series Weir DeckOne Station Solid Surface Lavatory System

DSWD-82000 Designer Series Weir DeckTwo Station Solid Surface Lavatory System

DSWD-83000 Designer Series Weir DeckThree Station Solid Surface Lavatory System

DSOF-81000 Designer Series Open FrontOne Station Solid Surface Lavatory System

DSOF-82000 Designer Series Open FrontTwo Station Solid Surface Lavatory System

DSOF-83000 Designer Series Open FrontThree Station Solid Surface Lavatory System

DSG-81000 Designer Series GradientOne Station Solid Surface Lavatory System

DSG-82000 Designer Series GradientTwo Station Solid Surface Lavatory System

DSG-83000 Designer Series GradientThree Station Solid Surface Lavatory System

DSCT-81000 Designer Series Counter TopOne Station Solid Surface Lavatory System

DSG-82000 Designer Series Counter TopTwo Station Solid Surface Lavatory System

DSG-83000 Designer Series Counter TopThree Station Solid Surface Lavatory System

®

LIMITED WARRANTYUnless otherwise noted, Sloan Valve Company warrants its Products to be made of first class materials, free from defects of material or workmanship under normaluse and to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of threeyears (1 year for SF Faucets, special finishes and PWT electronics and 30 days on PWT software) from date of purchase. During this period, Sloan Valve Companywill, at its option, repair or replace any part or parts which prove to be thus defective if returned to Sloan Valve Company, at customer’s cost, and this shall be thesole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons ororganizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of thebatteries.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEQUENTIALDAMAGES OF ANY MEASURE WHATSOEVER.

2

DSWD-81000 Designer Series Weir DeckSingle Station Solid Surface Lavatory System

LAVATORY SYSTEM ROUGH-IN SINGLE STATION

22”(558 mm)

1 ¹/8” (28 mm)

17”(431 mm) 6 ½”

(165 mm) 6½”(165 mm)

5”(127 mm)

2 ½” (63 mm)

CENTERLINE

30”(762 mm)

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADA 20” (508mm)

24” (610 mm)

Water Supply 22”(558 mm)

1 ¹/8” (28 mm)

17”(431 mm) 6 ½”

(165 mm) 6½”(165 mm)

5”(127 mm)

2 ½” (63 mm)

CENTERLINE

30”(762 mm)

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADAADADADADADADADADADADADADAAAAAAAA 20” (508mm)

24” (610 mm)

Water Supply

DSOF-81000 Designer Series Open FrontSingle Station Solid Surface Lavatory System

22”(558 mm)

17”(431 mm)

5” (127 mm)

13”(330 mm)

24”(609 mm)

1 3/4”(44 mm)

1 3/4”(44 mm)

CENTERLINE

22”(558 mm)

5” (63 mm)

P-Trap Configuration(In Wall)

CL 5”(127 mm)

4” (101 mm)

2 1/2” (63 mm)

2 1/2” (63 mm)

ADA

4”(101 mm)

22”(558 mm)

17”(431 mm)

5” (127 mm)

13”(330 mm)

24”(609 mm)

1 3/4”(44 mm)

1 3/4”(44 mm)

CENTERLINE

22”(558 mm)

5” (63 mm)

P-Trap Configuration(In Wall)

CL 5”(127 mm)

4” (101 mm)

2 1/2” (63 mm)

2 1/2” (63 mm)

ADAAAAAAAAAAAAAADDDDDDDDDDDAAAAAAAAAAA

4”(101 mm)

Prior to installing the Sloan Designer Series Lavatory System, install the itemslisted below. Also, refer to the appropriate rough-in diagram on pages 2 – 6.• Water Supply• Hot and cold water supply lines or tempered water supply line• Drain lines

Important:• ADEQUATE STRUCTURAL SUPPORT IN OR BEHIND THE WALL IS REQUIRED.

REFER TO THE APPROPRIATE ROUGH-IN DIAGRAM ON PAGES 2 – 6 FORDRY WEIGHT OF SINK. STRUCTURAL SUPPORT MUST HAVE A MINIMUMPULLOUT RATING OF 1000 POUNDS (450 kg).

• ALL PLUMBING SHOULD BE INSTALLED IN ACCORDANCE WITH APPLICABLECODES AND REGULATIONS.

• BEFORE CONNECTING FLEX HOSES TO SUPPLY STOPS, FLUSH ALL WATERLINES UNTIL WATER IS CLEAR.

PRIOR TO INSTALLATION

22”(558 mm)

1 ¹/8” (28 mm)

17”(431 mm) 6 ½”

(165 mm) 6½”(165 mm)

5”(127 mm)

2 ½” (63 mm)

CENTERLINE

30”(762 mm)

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADA 20” (508mm)

24” (610 mm)

Water Supply

3

DSG-81000 Designer Series GradientSingle Station Solid Surface Lavatory System

LAVATORY SYSTEM ROUGH-IN SINGLE STATION

1 ¹/8” (28 mm)

22”(558 mm)

2 ½” (63 mm)

5”(127 mm)

17”(431 mm) 6 ½”

(165 mm) 6½”(165 mm)

30”(762 mm)

CENTERLINE

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADA 20” (508mm)

24” (610 mm)

Water Supply

1 ¹/8” (28 mm)

22”(558 mm)

2 ½” (63 mm)

5”(127 mm)

17”(431 mm) 6 ½”

(165 mm) 6½”(165 mm)

30”(762 mm)

CENTERLINE

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADA 20” (508mm)

24” (610 mm)

Water Supply 1 ¹/8” (28 mm)

22”(558 mm)

2 ½” (63 mm)

5”(127 mm)

17”(431 mm) 6 ½”

(165 mm) 6½”(165 mm)

30”(762 mm)

CENTERLINE

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADAADADADADADADADADADADADADADADADADAAAAAA 20” (508mm)

24” (610 mm)

Water Supply

DSCT-81000 Designer Series Counter TopSingle Station Solid Surface Lavatory System

6 ¼”(158 mm)

4”(101 mm)

30”(762 mm)

11 ¾”(298 mm)

ADA

4” (101 mm)

4” (101 mm)

34”(864 mm)

6 ¼”(158 mm)

4”(101 mm)

30”(762 mm)

11 ¾”(298 mm)

ADA

4” (101 mm)

4” (101 mm)

34”(864 mm)

6 ¼”(158 mm)

4”(101 mm)

30”(762 mm)

11 ¾”(298 mm)

ADA

4” (101 mm)

4” (101 mm)

ADADADADADADADADADADAAAAAA 34”(864 mm)

4

DSWD-82000 Designer Series Weir DeckDouble Station Solid Surface Lavatory System

LAVATORY SYSTEM ROUGH-IN TWO STATION

1 ¹/8” (28 mm)

22”(558 mm)

2 ½” (63 mm)

5”(127 mm)

4”(101 mm)

4”(101 mm)

60”(1524 mm)

52”(1320 mm)

CENTERLINE

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADAADADADADADADADADADADADADADADADAAAAAAAA 20” (508mm)

24” (610 mm)

Water Supply

DSOF-82000 Designer Series Open FrontDouble Station Solid Surface Lavatory System

60”(1524 mm)

22”(558 mm)

6”(152 mm)

6”(152 mm)

12”(305 mm)

30”(762 mm)

CENTERLINE

2 1/2” (63 mm)

2 1/2” (63 mm)

22”(558 mm)

5” (63 mm)

CL 5”(127 mm)

4” (101 mm)

ADAAAAAAAAAAAAADDDDDDDDDDAAAAAAAAAA

4”(101 mm)

P-Trap Configuration(In Wall)

DSG-82000 Designer Series GradientDouble Station Solid Surface Lavatory System

22”(558 mm)

2 ½” (63 mm)

5”(127 mm) 1 ¹/8”

(28 mm)

52”(1320 mm)

4”(101 mm) 4”

(101 mm) 60”(1524 mm)

CENTERLINE

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADAADADADADADADADADADADADADADADADADAAAAAAAA 20” (508mm)

24” (610 mm)

Water Supply

5

LAVATORY SYSTEM ROUGH-IN TWO STATION

DSCT-82000 Designer Series Counter TopDouble Station Solid Surface Lavatory System

6 ¼”(158 mm)

4”(101 mm)

30”(762 mm)

15”(381 mm)

15”(381 mm)

11 ¾”(298 mm)

ADA

4” (101 mm)

4” (101 mm)

ADADADADADADADADADADAAAAAAAA 34”(864 mm)

DSWD-83000 Designer Series Wier DeckTriple Station Solid Surface Lavatory System

LAVATORY SYSTEM ROUGH-IN THREE STATION

1 ¹/8” (28 mm)

22”(558 mm)

2 ½” (63 mm)

4”(101 mm)

90”(2286 mm)

82”(2082 mm)

4”(101 mm)

CENTERLINE

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADAADADADADADADADADADADADADADADADADAAAAAAA 20” (508mm)

24” (610 mm)

Water Supply

DSOF-83000 Designer Series Open FrontTriple Station Solid Surface Lavatory System

22”(558 mm)

90”(2286 mm)

6”(152 mm)

6”(152 mm)

12”(305 mm)

12”(305 mm)

60”(762 mm)

60”(762 mm)

CENTERLINE

2 1/2” (63 mm)

2 1/2” (63 mm)

22”(558 mm)

5” (63 mm)

CL 5”(127 mm)

4” (101 mm)

ADAAAAAAAAAAAAAAADDDDDDDDDDDAAAAAAAAA

4”(101 mm)

P-Trap Configuration(In Wall)

6

DSG-83000 Designer Series GradientTriple Station Solid Surface Lavatory System

1 ¹/8” (28 mm)

22”(558 mm)

2 ½” (63 mm)

5”(127 mm)

82”(2082 mm)

4”(101 mm)

4”(101 mm)

90”(2286 mm)

22”(558 mm)

5”(127 mm)

5”(127 mm)

34” (863 mm)

ADAADADADADADADADADADADADADADAAAAAAAA 20” (508mm)

24” (610 mm)

Water Supply

LAVATORY SYSTEM ROUGH-IN THREE STATION

DSCT-83000 Designer Series Counter TopTriple Station Solid Surface Lavatory System

11 ¾”(298 mm) 6 ¼”

(158 mm)

4”(101 mm)

15”(381 mm)

30”(762 mm)

30”(762 mm)

15”(381 mm)

ADA

4” (101 mm)

4” (101 mm)

ADADADADADADADADADADADAAAAAAAA 34”(864 mm)

• Electric drill for drilling anchor holes.• Socket or open end wrench for installing anchoring fasteners.

• Open end wrench for connecting water lines.• Pipe wrench for installing drain lines.

TOOLS REQUIRED FOR INSTALLATION

SINK LOCATION

Determine the appropriate wall location for the Lavatory System. Consider that hot and cold water supply lines, a drain line, and an electrical source (receptacle forhardwired faucets) will be required. Compare the physical dimensions of the Lavatory System to the space available for the installation. If wall is not load bearing, acarrier may be required behind the wall. Refer to the appropriate Rough-in diagram on pages 2 – 6 for Lavatory System dimensions.Prior to Lavatory System installation, electric wiring, water supply and drain must be installed.

1– STRAINER INSTALLATION

DRAIN NUT

CARDBOARD SEAT

RUBBER GASKET

STRAINERA

B

Insert Strainer into Basin using plumbers putty (supplied by installer).

From beneath Basin, install the Rubber Gasket, Cardboard Seat andDrain Nut onto Strainer. Secure Drain Nut against Basin.

• Adhesive Caulk for vanity or bracket mounting• Adhesive for Lavatory optional mounting

7

2B – WALL MOUNTING

2A – VANITY MOUNTING

3 - INSTALL FAUCET, SENSOR, DRAIN AND WATER LINE CONNECTIONS

Measure and mark a level line on the wall at your required height.

MOUNTING BRACKETS

Note: Wall mounting fasteners supplied by others.

Install faucet, sensor, and water line connections as instructed in theinstallation instructions furnished with the Faucet.

A

A

B

B

C

D

A

B

Apply adhesive caulk (not supplied) to perimeter of vanity casework andcorners of deck.

With the help of another person, place the lavatory deck on vanity.

Measure and mark the Bracket locations as shown. Drill holes in thewall using the Mounting Bracket as a template.Install wall anchors that are specific for that type of wall: drywall,concrete, metal studs, wood studs, etc. (supplied by installer). Somewall materials will require additional reinforcement. Anchors with aminimum pull-out force of 1000 lbs. (reinforce wall at anchor points.)

Secure Mounting Brackets (optional) to the wall. Use left and rightBrackets as required.

Note: Be sure Mounting Bracket is level and plumb against wall so that Lavatory will drain correctly once assembly is completed.

Apply adhesive (not supplied) to brackets and corners of lavatory deck.With the help of another person, place the Lavatory on the MountingBrackets and secure to screws to subtop.

Caution: Do not leave lavatory on mounting brackets unsupported.It may fall and cause damage or personal injury.

WALL

P-TRAPFLEX HOSE

STRAINER

WATERSUPPLYLINE

DRAINLINEInstall P-trap and drain lines making sure that all connections are

secure.

C Flush supply line(s) of any debris. Install Flex Hose(s) to water supplyline(s). Tighten fitting(s) securely.

Note: P-trap and drain lines furnished by others.

CARE AND CLEANINGDO NOT USE abrasive or chemical cleaners (including chlorine bleach) to clean lavatory deck or faucets that may dull the luster and attack the finish. Use ONLY soapand water, then wipe dry with clean cloth or towel.

While cleaning the sink area, protect the faucet from any splattering of cleaner. Acids and cleaning fluids will discolor or remove chrome plating.

E

8

Item DescriptionNo.

1 DSG-81000 Gradient (triple)2 DSG-82000 Gradient (double)3 DSG-83000 Gradient (single)4 DSOF-83000 Open Front (triple)5 DSOF-82000 Open Front (double)6 DSOF-81000 Open Front (single)7 ELB-3 Right Mounting Bracket (optional) (not supplied)8 ELB-4 Left Mounting Bracket (optional) (not supplied)9 ETF-460-A Grid Strainer Assembly- Sloan Faucet (model varies)

PARTS LIST

1

3

9

2

7

8

4

5

6

9

Item DescriptionNo.

1 DSWD-81000 Wier Deck (single)2 DSWD-82000 Wier Deck (double)3 DSWD-83000 Wier Deck (triple)4 DSCT-83000 Counter Top (triple)5 DSCT-82000 Counter Top (double)6 DSCT-81000 Counter Top (single)7 ELB-3 Right Mounting Bracket (optional) (not supplied)8 ELB-4 Left Mounting Bracket (optional) (not supplied)9 ETF-460-A Grid Strainer Assembly- Sloan Faucet (model varies)

SLOAN • 10500 SEYMOUR AVENUE • FRANKLIN PARK, IL 60131Phone: 1-800-9-VALVE-9 or 1-847-671-4300 • Fax: 1-800-447-8329 or 1-847-671-4380 • www.sloanvalve.com

COPYRIGHT © 2012 SLOAN VALVE COMPANY Code No. 081664 – Rev. 1 (10/12)

1

3

9

2

7

84

5

6

NOTICE:The information contained in this document is subject to change without notice.

PARTS LIST