Note: Measurements may vary ± 6mm (0.25")

SPECIFICATION: (EXAMPLE)• Deck mount electronic lavatory faucet• All metal spout construction• Proximity® Sensing Technology• Hardwire units supplied with 24 VAC to

6.4 VDC converter (Transformer required). (Specify separately)

• Battery units supplied with 4 “C” cell batteries• Surface mount control box• Mixing valve required (Order separately)• Vandal resistant 0.5 gpm (1.9 L/min)

laminar outlet

590-P Series• Center mount, single hole installationo 590-PLGHDF (Battery)o 590-PLGHDFHW (Hardwire)

2.5

2.0

1.5

1.0

0.5

000

1

2

3

4

5

6

7

8

9

10 20 30 40 50 60 70 80Line Pressure (psig)

Outlet Flow RatesFLOW(L/min)

FLOW(GPM)

FLOW RATE vs PRESSURE

590-P SERIES ELECTRONIC DECK MOUNT LAVATORY FAUCET

FRONT VIEW SIDE VIEW

APPROVALS:• CSA certified • Complies to ASME A112.18.1/CSA B125.1• Indicates compliance to

ICC/ANSI A117.1• Verified compliant with 0.25% weighted average

Pb content regulations

( Contact Delta Representative for State and/or Local Approvals.)

Patented

®

82 mm(3.2") 135 mm

(5.3")

109 mm(4.3")

56 mm(2.2")

156 mm(6.1")

64 mm(2.5")

Max DeckThickness

590-P SERIESTYPICAL INSTALLATION

3/8"CompressionConnection

330 mm(13.0")MAX.

178 mm(7.0")MAX.

SensorWire

508 mm(20.0") Dia.

BraidedPolymer Hose

3/8"CompressionConnection

3/4" # 10 Screw

56 mm(2.22")

32 mm(1.25") Dia.

HoleRequired

3/8"CompressionConnection

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP –27C12 Rev. D Page 3.C.1

Batteries included on all battery models. Flow Rates are at 60 PSI. Refer to www.specselect.com for individual models. Note: Use all pages as product submittal sheets.

DSP–590-PHDF Rev. J

Electronic Proximity® Sensing Technology Lavatory Faucets

HDF®

COMMERCIAL

SPECIFICATION: (EXAMPLE)• Deck mount electronic lavatory faucet• All metal spout construction• Proximity® Sensing Technology • Hardwire units supplied with 24 VAC to

6.4 VDC converter (Transformer required). (Specify separately).

• Battery units supplied with 4 “C” cell batteries• Surface mount control box• Mixing valve required (Order separately)• Vandal resistant 0.5 gpm (1.9 L/min)

laminar outlet

591-P Series • 4" (102mm) centers • Coverplate with anti-rotation pino 591-PLGHDF (Battery)o 591-PLGHDFHW (Hardwire)

592-P Series • 8" (203mm) centers • Coverplate with anti-rotation pino 592-PLGHDF (Battery)o 592-PLGHDFHW (Hardwire)

2.5

2.0

1.5

1.0

0.5

000

1

2

3

4

5

6

7

8

9

10 20 30 40 50 60 70 80Line Pressure (psig)

Outlet Flow RatesFLOW(L/min)

FLOW(GPM)

FLOW RATE vs PRESSURE

Note: Measurements may vary ± 6mm (0.25")

591-P & 592-P SERIES ELECTRONIC DECK MOUNT LAVATORY FAUCET

FRONT VIEW

591-P & 592-P SERIESTYPICAL INSTALLATION

SIDE VIEW

50 mm(2.0")

Max Deck Thickness

32 mm(1.25") Dia.

3 Holesrequired

56 mm(2.22")

4" COVERPLATE102 mm (4.0")8" COVERPLATE203 mm (8.0")

4" COVERPLATE191 mm (7.5")8" COVERPLATE282 mm (11.1")

3/8"CompressionConnection

330 mm(13.0")MAX.

178 mm(7.0")MAX.

SensorWire

508 mm(20.0") Dia.

BraidedPolymer Hose

3/8"CompressionConnection

3/4" # 10 Screw

98 mm(3.9")

134 mm(5.3")

125 mm(4.9")

50 mm(2.0")

Max. DeckThickness

139 mm(5.5")

63 mm(2.5")

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.

Batteries included on all battery models. Flow Rates are at 60 PSI. Refer to www.specselect.com for individual models. Note: Use all pages as product submittal sheets.

Page 4.C.2 DSP–1500T4 Rev. LDSP–1500T4 Rev. CDSP–590-PHDF Rev. J

Electronic Proximity® Sensing Technology Lavatory Faucets

HDF®

COMMERCIAL

APPROVALS:• CSA certified • Complies to ASME A112.18.1/CSA B125.1• Indicates compliance to

ICC/ANSI A117.1• Verified compliant with 0.25% weighted average

Pb content regulations

( Contact Delta Representative for State and/or Local Approvals.)

Patented

®

Note: Measurements may vary ± 6mm (0.25")

590-P Series• Center mount, single hole installationo 590-PLGHDF (Battery)o 590-PLGHDFHW (Hardwire)

591-P Series • 4" (102mm) centers • Coverplate with anti-rotation pino 591-PLGHDF (Battery)o 591-PLGHDFHW (Hardwire)

592-P Series • 8" (203mm) centers • Coverplate with anti-rotation pino 592-PLGHDF (Battery)o 592-PLGHDFHW (Hardwire)

OPERATION: • Hands free (touchless) operation.• No visible sensor, the spout is the sensor.• Water flows when sensing is activated.• Water flow stops upon de-activation of sensing.• Adjustable sensing distance factory set to

76 mm (3").• Low battery audible beep (for battery models

only) will activate after faucet shuts off when approximately1500 cycles remain.

• Adjustable auto shut off feature. Factory set to 45 seconds.

• Metering mode with selectable flow times of 7 seconds to 4 minutes, factory set off.

• Periodic Rinse feature, time adjustable in 6 hour increments up to 2 days. Selectable rinsing lengths from 10 to 180 seconds. Factory set off.

NOTE 1: For optimum performance of this product, we recommend a system pressure between 20 and 80 PSI static. This product will operate up to a maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting.

NOTE 2: Designed for routine 180°F (82°C) disinfection cycles up to 10 minutes.

NOTE 3: Use 3-conductor 18AWG wire between transformer and hardwire converter/driver board earth ground.

NOTE 4: Use Delta Commercial approved transformers and mount the transformer a minimum of 6 inches away from the Delta driver board enclosure.

NOTE 5: Refer to Proximity Application Notes for installation best practices, proper grounding and wiring diagrams on www.specselect.com.

590-P, 591-P & 592-P SERIES ELECTRONIC DECK MOUNT LAVATORY FAUCET

VANDAL RESISTANT SURFACE MOUNT HOUSING

3/8" CompressionConnection

Outlet

3/8" CompressionInlet

36 mm (1.43")

Recommended381 mm

(15" max.) to top of counter

146 mm (5.73")

89 mm(3.5")MAX.

101 mm (3.96")

139 mm (5.47")

3/4" # 10 Screw

BatteryPack

CSA/UL RATED ELECTRICAL BOX

CONNECT GROUNDTO ELECTRICAL BOX

CONDUIT TO ELECTRICALPANEL

BUILDING/PANELGROUND

LINE

PRIM

ARY

SECO

NDAR

Y

NEUTRAL

DELTA TRANSFORMER:RP32508, 060704A060771A

24 VAC AND GROUND AVAILABLE FOR DELTA HARDWIRECONVERTER ANDCONTROLLER

FAUCET CONTROLLER /SINK GROUND

ELECTRICAL SCHEMATICS

Battery Operated – Box shown.Hardwire Version comes complete with Watertight Connector and Hardwire Converter 24 VAC to 6.4 VDC.Hardwire with Battery Backup (Available option for field conversion) comes complete with Watertight Connector, Hardwire Converter 24 VAC to 5 VDC and 9 volt battery. See DSP-BB for detailed specification.

AVAILABLE OPTIONS FOR FIELD CONVERSIONo 061047A Hardwire with Battery Backup

See DSP-BB for detailed specification.

o 060651A 3 Position Switch

See DSP-ELACC for detailed specification.

Electronic Proximity® Sensing Technology Lavatory Faucets

HDF®

COMMERCIAL

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP –27C12 Rev. D Page 3.C.3

Batteries included on all battery models. Flow Rates are at 60 PSI. Refer to www.specselect.com for individual models. Note: Use all pages as product submittal sheets.

DSP–590-PHDF Rev. J