dsr 2010-11 pipes rates
TRANSCRIPT
Page 1
Section - I- ( I )- C.I./D.I.PipesSr No Item Description Unit
With ED
1
a CLASS " LA "
1 RMT 766 6952 RMT 944 8563 RMT 1237 11224 RMT 1513 13735 RMT 2215 20096 RMT 2984 27077 RMT 3847 34908 RMT 4848 43989 RMT 5899 535210 RMT 7113 645311 RMT 8220 745812 RMT 10955 993813 RMT 14137 1282514 RMT 15833 1436415 RMT 17724 1607916 RMT 21589 1958517 25935 23528
b CLASS " A "
1 RMT 832 7552 RMT 1038 9423 RMT 1350 12254 RMT 1664 15095 RMT 2404 21806 RMT 3250 29487 RMT 4205 38158 RMT 5258 47709 RMT 6447 584910 RMT 7810 708611 RMT 8955 812412 RMT 11959 1084913 RMT 15584 1413814 RMT 17311 1570415 RMT 19352 1755616 RMT 23555 2136917 RMT 28332 25702
Rate ( in Rs.) 2010-2011
Without ED
Providing and supplying ISI mark C.I. S/S pipes of following class and diameter including all taxes (Central and local) insurance, railway freight, unloading from railway wagon, loading into trucks, transport to departmental stores / site, unloading stacking etc. complete. (IS:1536/1989)(Suitable for Tyton / Pig lead joints)
Class "LA" - 80mm
Class "LA" - 100 mm
Class "LA" - 125 mm
Class "LA" - 150 mm
Class "LA" - 200 mm
Class "LA" - 250 mm
Class "LA" - 300 mm
Class "LA" - 350 mm
Class "LA" - 400 mm
Class "LA" - 450mm
Class "LA" - 500 mm
Class "LA" - 600 mm
Class "LA" - 700 mm
Class "LA" - 750 mm
Class "LA" - 800 mm
Class "LA" - 900 mm
Class "LA" - 1000 mm
Class "A" - 80 mm
Class "A" - 100 mm
Class "A" - 125 mm
Class "A" - 150 mm
Class "A" - 200 mm
Class "A" - 250 mm
Class "A" - 300 mm
Class "A" - 350 mm
Class "A" - 400 mm
Class "A" - 450 mm
Class "A" - 500 mm
Class "A" - 600 mm
Class "A" - 700 mm
Class "A" - 750 mm
Class "A" - 800 mm
Class "A" - 900 mm
Class "A" - 1000 mm
Page 2
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
c CLASS " B "
1 RMT 884 8022 RMT 1107 10053 RMT 1453 13194 RMT 1791 16255 RMT 2599 23586 RMT 3514 31887 RMT 4557 41348 RMT 5703 51749 RMT 6584 597310 RMT 8430 764711 RMT 9689 879012 RMT 12765 1158013 RMT 16675 1513714 RMT 18779 1703615 RMT 20933 1899116 RMT 25520 2315217 RMT 30618 27777
2
a C.I. "LA"CLASS / D.I.-K-9/K-7 Mortar Lined
1 80 mm RMT 50 572 100 mm RMT 60 67
125 mm RMT 75 833 150 mm RMT 80 904 200 mm RMT 101 1185 250 mm RMT 132 1546 300 mm RMT 143 1737 350 mm RMT 177 2128 400 mm RMT 213 2629 450 mm RMT 223 27610 500 mm RMT 246 31811 600 mm RMT 324 42412 700 mm RMT 417 596
Class "B" - 80 mm
Class "B" - 100 mm
Class "B" - 125 mm
Class "B" - 150 mm
Class "B" - 200 mm
Class "B" - 250 mm
Class "B" - 300 mm
Class "B" - 350 mm
Class "B" - 400 mm
Class "B" - 450 mm
Class "B" - 500 mm
Class "B" - 600 mm
Class "B" - 700 mm
Class "B" - 750 mm
Class "B" - 800 mm
Class "B" - 900 mm
Class "B" - 1000 mm
NOTE : The pipe rates mentioned here shall be used when supply is from M.J.P. In case of Turnkey Projects , the rates shall be increased by 2.50%.
Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, giving hydraulic testing etc. complete.
Without Rubber Ring
With Rubber
Ring
Note : Only S.B.R. Rubber gasket to be used as per IS 5382 and IS 12820
Page 3
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
13 750 mm RMT 467 65314 800 mm RMT 572 76515 900 mm RMT 684 96216 1000 mm RMT 808 1166
Page 4
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
b C.I. "A"CLASS
1 80 mm RMT 53 602 100 mm RMT 64 71
125 mm RMT 81 903 150 mm RMT 88 984 200 mm RMT 109 1255 250 mm RMT 143 1656 300 mm RMT 155 1857 350 mm RMT 192 2278 400 mm RMT 215 2639 450 mm RMT 225 27810 500 mm RMT 266 33911 600 mm RMT 352 45312 700 mm RMT 453 63213 750 mm RMT 508 69414 800 mm RMT 600 79315 900 mm RMT 723 100216 1000 mm RMT 844 1202c C.I. "B"CLASS
1 80 mm RMT 57 632 100 mm RMT 68 75
125 mm RMT 83 923 150 mm RMT 93 1034 200 mm RMT 117 1335 250 mm RMT 154 1756 300 mm RMT 168 1997 350 mm RMT 206 2418 400 mm RMT 241 2909 450 mm RMT 244 29710 500 mm RMT 286 35911 600 mm RMT 380 48112 700 mm RMT 489 66813 750 mm RMT 552 73814 800 mm RMT 644 83715 900 mm RMT 764 104316 1000 mm RMT 871 1229
NOTE : Only 85% rate shall be payble till satiafactory hydraulic testing is given.
Page 5
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
3 With ED
a D.I. K - 9
1 RMT 1041 9642 RMT 1516 14043 RMT 1855 17174 RMT 2483 22995 RMT 3170 29356 RMT 3902 36137 RMT 4670 43258 RMT 5598 51839 RMT 6527 604410 RMT 8624 798511 RMT 11025 1020812 RMT 12529 1160113 RMT 13725 1270814 RMT 16745 1550515 RMT 19699 18240
b D.I. K-7
1 RMT 898 8322 RMT 1326 12283 RMT 1550 14354 RMT 2048 18975 RMT 2590 23986 RMT 3203 29667 RMT 3814 35318 RMT 4558 42219 RMT 5369 497110 RMT 7050 653611 RMT 9549 884112 RMT 11113 1029013 RMT 12868 1119514 RMT 15396 1425615 RMT 18083 16743
NOTE : 1) D.I. K-7 pipes shall not be used for Distribution System for dia. Less than & including 250mm.
NOTE : 2)For lowering laying & jointing D.I. K-9 / K-7 pipes rates shall be adopted as per C.I."LA" Class pipe.
Providing D.I. pipes of following grades with internal cement mortar lining and including all taxes, insurance, railway freight, unloading from railway wagon, loading into truck, transport to departmental stores/site, unloading, stacking, etc. complete. (IS:8329-2000 Latest Version) .
Without ED
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
Page 6
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
4
1 Joint 5972 Joint 7383 Joint 8804 Joint 10915 Joint 15916 Joint 19337 Joint 23318 Joint 26429 Joint 308110 Joint 427911 Joint 460012 Joint 591013 Joint 694314 Joint 788615 Joint 846916 Joint 903317 Joint 9631
NOTE : Only 85% payment shall be payble till satiafactory hydraulic testing is given.
5
1 RMT 1235.002 RMT 1525.003 RMT 1987.004 RMT 2479.005 RMT 3803.006 RMT 5125.007 RMT 6589.008 RMT 8601.009 RMT 10487.0010 RMT 12593.0011 RMT 14779.0012 RMT 21023.0013 RMT 28166.0014 RMT 30646.00
Providing and making lead caulked joint with molten lead to Cast Iron pipes and / or specials of all classes and fitting of following dia including cost of lead and all jointing material, labour, hydraulic testing etc. complete.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
Providing and supplying ISI standard CI double flanged pipes including all taxes (Central and local), railway freight, insurance, unloading from railway wagon, loading into truck transport to stores / site, unloading etc. complete as directed by Engneer-in-charge.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
Page 7
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
6
a D/F Specials
1 KG 60.002 KG 64.003 Above 600 mm Dia KG 68.00
b S/S Specials / Socketted Br.Flagd. Specials
1 KG58.00
2 KG62.00
3 Above 600 mm dia. Kg 65.00
c Plain ended / P.E. Br.Flagd. Specials
1 Upto and including 300 mm dia. KG 56.002 from 350 mm To 600 mm dia. KG 62.003 Above 600 mm dia. Kg 65.00
7
1 KG 65.00
2 KG 64.00
3 KG 62.004 KG 62.00
5 KG 62.00
6 KG 60.00
8
1 Joint 1582 Joint 2743 Joint 2854 Joint 5525 Joint 5726 Joint 8247 Joint 854
Providing and supplying ISI standard CI flanged / S& S specials including all taxes (Central and local), railway freight, insurance, unloading from railway wagon, loading into truck transport to depermental store/ site, unloading stacking etc. complete.
D/F Specials Upto and including 300 mm dia.
D/F Specials Above 350 mm dia upto 600 mm
S/S Specials/ socketed Branch Flanged Specials Upto and including 300 mm dia.
S/S Specials/ socketed Branch Flanged Specials from 350 mm To 600 mm dia.
Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside including all taxes (Central and local), octroi, inspection charges, transportation to stores / site, and stacking, etc. complete.
Machine ends suitable for PSC pipes of all diameters as per detailed drawing with 10 mm thick x 0.7 M long barrel welded to it.
Only flanges with machining and drilling holes, etc. complete more than 40 mm thick
Double flanged specials of all diameters
All socketted specials or socketted branch flanged specials of all diameters
Plain ended specials or plain ended branch flanged specials of all diameters
MS barrels (pipe pieces) locally manufactured (for small quantities)
Providing and making flanged joints to flanged C.I./M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
Page 8
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
8 Joint 11169 Joint 139610 Joint 170911 Joint 176512 Joint 188713 Joint 286414 Joint 293915 Joint 409016 Joint 423117 Joint 4372
NOTE : Only 85% payment shall be payble till satiafactory hydraulic testing is given.
9
1 Joint 1752 Joint 2963 Joint 3134 Joint 5865 Joint 6236 Joint 8927 Joint 9428 Joint 12269 Joint 153010 Joint 187111 Joint 195412 Joint 213913 Joint 319114 Joint 330815 800 mm Joint 450416 900 mm Joint 473217 1000 mm Joint 4979
NOTE : Only 85% payment shall be payble till satiafactory hydraulic testing is given.
10
For all types of specials , bends,tees etc.
a 80 to 300 mm dia. Kg. 91.00
b 350 mm & above dia. Kg. 110.00
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
Erecting and hoisting in position and jointing, testing M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour, scaffolding, hydraulic testing etc. complete.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading , unloading including all taxes , etc. complete.As per IS 9523
Page 9
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
Page 10
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
11
i) 100 mm RMT 1687ii) 150 mm RMT 2291iii) 200 mm RMT 2932iv) 250 mm RMT 3979v) 300 mm RMT 5009vi) 350 mm RMT 6523vii) 400 mm RMT 7896viii) 450 mm RMT 9435ix) 500 mm RMT 10966x) 600 mm RMT 14440xi) 700 mm RMT 19430xii) 800 mm RMT 23751xiii) 900 mm RMT 29480xiv) 1000 mm RMT 34615
Providing and supplying ISI standard welded DI double flanged pipe including all taxes (central & local) railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- cahrge. (for 2.75 m bare pipe)
Page 11
Section - I - ( ii )A.C.PipesSr No Item Description Unit
1 With ED
a Class - 15 ( Test Pressure - 1.5 Mpa.)
1 80 mm RMT 1392 100 mm RMT 1793 125 mm RMT 2144 150 mm RMT 3765 200 mm RMT 4976 250 mm RMT 7197 300 mm RMT 1052
b Class - 20 ( Test Pressure - 2.0 Mpa.)
1 80 mm RMT 1532 100 mm RMT 2293 125 mm RMT 2694 150 mm RMT 4755 200 mm RMT 6126 250 mm RMT 9067 300 mm RMT 11198
9
c Class - 25 ( Test Pressure - 2.5 Mpa.)
1 80 mm RMT 1732 100 mm RMT 2883 125 mm RMT 3344 150 mm RMT 5985 200 mm RMT 7896 250 mm RMT 11847 300 mm RMT 12988
9
Rate ( in Rs.) 2010-2011
Providing and supplying Asbestos Cement pressure pipes manufactured and tested as per ISO-160 standards of following class and diameter in standard lengths including cost of all taxes (Central and local) insurance, railway fright, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental stores / site, unloading, stacking, etc. complete.
Without ED
Page 12
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
2
a Class - 15 ( Test Pressure - 1.5 Mpa.)
1 No 2762 No 3553 No 4634 No 5535 No 9226 No 10477 No 1581
b Class - 20 ( Test Pressure - 2.0 Mpa.)
1 No 2932 No 3843 No 4904 No 5735 No 7706 No 10877 No 1636
3
a Class - 15 ( Test Pressure - 1.5 Mpa.)
1 No 392 No 503 No 694 No 845
6
7
Providing and supplying C.I. detachable joints suitable for A.C. pressure pipes manufactured as per ISO-160 standards of following class and diameter including cost of all taxes (Central and local), insurance, railway freight, inspection charges, unloading from railway wagon, loading into truck, transporting to departmental store / site, unloading, stacking and cost of rubber rings, nut bolts, etc. complete. ( IS 1538/1993 )
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
Providing and supplying A. C. pressure coupler suitable for A.C. pressure pipes manufactured as per ISO-160 standards of following class and diameter including cost of all taxes (Central and local) insurance, railway fright, inspection charges, and cost of rubber rings, etc. complete. (supply at stores / site).
80 mm
100 mm
125 mm
150 mm
Page 13
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
8
9
10
11
12
b Class - 20 ( Test Pressure - 2.0 Mpa.)
1 No 422 No 563 No 724 No 985
6
7
8
9
10
11
12
4
a Class - 15 ( Test Pressure - 1.5 Mpa.)
1 RMT 27.002 RMT 36.003 RMT 39.004 RMT 49.005 RMT 62.006 RMT 78.007 RMT 96.00
b Class - 20 ( Test Pressure - 2.0 Mpa.)
1 RMT 27.002 RMT 39.003 RMT 43.004 RMT 54.005 RMT 71.006 RMT 88.007 RMT 109.00
80 mm
100 mm
125 mm
150 mm
Lowering, laying and jointing with C.I.D. joints, A. C. pressure pipes and C.I. or M. S. specials of following class and diameters including conveyance from stores to site of works, cost of labour and material, giving satisfactory hydraulic testing, etc. as per IS code, etc. complete (excluding cost of C. I. D. joints nut bolts, rubber rings.)
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
Page 14
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
5
a Class - 15 ( Test Pressure - 1.5 Mpa.)
1 RMT 18.002 RMT 24.003 RMT 28.004 RMT 36.005 RMT 49.006 RMT 63.007 RMT 81.00
b Class - 20 ( Test Pressure - 2.0 Mpa.)
1 RMT 19.002 RMT 28.003 RMT 31.004 RMT 41.005 RMT 59.006 RMT 73.007 RMT 96.00
NOTE : 1) Only 85% payment for lowering laying jointing shall be payble till satiafactory hydraulic testing is given.
Lowering laying and jointitng with A. C. coupler A.C. pressure pipes and C.I. or M.S. specials of following class and diameters including conveyance from stores to site of works, cost of labour and material, giving satisfactory hydraulic testing, etc. as per IS code, etc. complete excluding cost of A. C. couplers and rubber rings.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
NOTE : 2) Without any extra cost every pipe in the factory shall be hydraulically tested for 1 higher class I.e. when class 15 is ordered every pipe shall be tested for 20 Kg./Sqcm at factory but pipe shall be branded & paid as class 15. This foot note shall appear in tender condition.
NOTE : 3) Whenever manufacturer & contractor for lowering laying jointing is separate the principle contractor shall enter into an aggrement with A.C.pipe manufacturer for satisfactory manufacturing ,transporting ,lowering ,laying jointing & testing of pipe.This foot Note shall appear in tender conditions
PVC 15
Section - I - ( iii ) - P.V.C.PipesSr No Item Description Unit
1
Note ; 1) 10% of cost of pipe shall be considered for cost of P.V.C. specials for estimate purpose only.
With ED
a Working Pressure 4 Kg./Sq.cm
1 RMT 39 352 RMT 55 503 RMT 77 704 RMT 105 955 RMT 176 1596 RMT 233 2107 RMT 316 2868 RMT 391 3549 RMT 500 45210 RMT 611 55311 RMT 810 73412 RMT 1031 93413 355 mm RMT 1382 125114 400 mm RMT 1762 1596
b Working Pressure 6 Kg./Sq.cm
1 RMT 56 502 RMT 79 723 RMT 113 1034 RMT 157 1425 RMT 261 2366 RMT 337 3057 RMT 448 4068 RMT 572 5189 RMT 723 65410 RMT 902 81711 RMT 1190 1077
Rate ( in Rs.)
2010-2011
Rate ( in Rs.)
2010-2011
Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent).
Note ; 2) One coupler & required cement solvent shall be provided with each full length pipe, cost of which is included in rates below.
Without ED
63 mm
75 mm
90 mm
110 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
63 mm
75 mm
90 mm
110 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
PVC 16
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
Rate ( in Rs.)
2010-2011
12 RMT 1517 137413 355 mm RMT 2025 183414 400 mm RMT 2588 2343
315 mm
PVC 17
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
Rate ( in Rs.)
2010-2011
c Working Pressure 8 Kg./Sq.cm
1 RMT 77 692 RMT 110 993 RMT 155 1404 RMT 218 1985 RMT 363 3286 RMT 474 4297 RMT 629 5708 RMT 791 7169 RMT 1004 90910 RMT 1255 113611 RMT 1654 149712 RMT 2094 189713 355 mm RMT 2816 255014 400 mm RMT 3647 3302
d . Working Pressure 10 Kg./Sq.cm
1 RMT 92 832 RMT 131 1193 RMT 189 1714 RMT 267 2415 RMT 432 3916 RMT 565 5117 RMT 777 7048 RMT 961 8709 RMT 1227 111110 RMT 1552 140411 RMT 1949 176512 RMT 2477 224313 355 mm RMT 3331 301614 400 mm RMT 4247 3845
e . Working Pressure 12.50 Kg./Sq.cm
1 RMT 117 1062 RMT 165 1503 RMT 239 2164 RMT 339 3065 RMT 551 4986 RMT 723 6557 RMT 989 8968 RMT 1228 11129 RMT 1561 141310 RMT 1973 178611 RMT 2481 2247
63 mm
75 mm
90 mm
110 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
63 mm
75 mm
90 mm
110 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
63 mm
75 mm
90 mm
110 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
PVC 18
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
Rate ( in Rs.)
2010-2011
12 RMT 3164 286513 355 mm RMT 4228 382914 400 mm RMT 5479 4961
2
a . Working Pressure 4 Kg./Sq.cm
1 63 mm RMT 41.00 37.002 75 mm RMT 59.00 52.003 90 mm RMT 82.00 74.004 110 mm RMT 111.00 101.005 125 mm RMT 154.00 139.006 140 mm RMT 186.00 169.007 160 mm RMT 247.00 223.008 180 mm RMT 335.00 303.009 200 mm RMT 414.00 375.0010 RMT 529.00 480.0011 RMT 648.00 587.0012 RMT 859.00 778.0013 RMT 1094.00 989.00
b . Working Pressure 6 Kg./Sq.cm
1 RMT 59.00 53.002 RMT 84.00 76.003 RMT 121.00 109.004 RMT 167.00 150.005 RMT 230.00 207.006 RMT 276.00 251.007 RMT 357.00 323.008 RMT 475.00 431.009 RMT 606.00 549.0010 RMT 766.00 693.0011 RMT 956.00 866.0012 RMT 1261.00 1142.0013 RMT 1607.00 1456.00
315 mm
Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes for potable water with rubber ring joints including cost of rubber ring as per IS 4985-1988, all local and central taxes, transportation. freight charges, transit insurance, inspection charges, loading, unloading, conveyance to store / site and stacking the same in closed shed duly protected from sun rays and rains, etc. complete as directed.( With third party inspection )
Note ; One Rubber Ring shall be provided with each full length pipe, cost of which is included in rates below.
225 mm
250 mm
280 mm
315 mm
63 mm
75 mm
90 mm
110 mm
125 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
PVC 19
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
Rate ( in Rs.)
2010-2011
. Working Pressure 8 Kg./Sq.cm
1 RMT 81.00 73.002 RMT 116.00 105.003 RMT 164.00 148.004 RMT 231.00 210.005 RMT 319.00 289.006 RMT 385.00 348.007 RMT 502.00 455.008 RMT 667.00 604.009 RMT 839.00 759.0010 RMT 1064.00 964.0011 RMT 1330.00 1204.0012 RMT 1753.00 1588.0013 RMT 2220.00 2011.00
c . Working Pressure 10 Kg./Sq.cm
1 RMT 97.00 89.002 RMT 140.00 126.003 RMT 201.00 181.004 RMT 283.00 256.005 RMT 391.00 352.006 RMT 457.00 414.007 RMT 599.00 542.008 RMT 824.00 746.009 RMT 1019.00 922.0010 RMT 1301.00 1177.0011 RMT 1644.00 1489.0012 RMT 2066.00 1871.0013 RMT 2625.00 2377.00
c . Working Pressure 12.5 Kg./Sq.cm
1 RMT 124.00 112.002 RMT 175.00 158.003 RMT 253.00 229.004 RMT 360.00 325.005 RMT 496.00 448.006 RMT 584.00 529.007 RMT 767.00 694.008 RMT 1049.00 950.009 RMT 1301.00 1178.0010 RMT 1654.00 1498.0011 RMT 2092.00 1893.0012 RMT 2630.00 2382.0013 RMT 3353.00 3036.00
63 mm
75 mm
90 mm
110 mm
125 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
63 mm
75 mm
90 mm
110 mm
125 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
63 mm
75 mm
90 mm
110 mm
125 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
PVC 20
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
Rate ( in Rs.)
2010-2011
3
a . Working Pressure 4 Kg./Sq.cm
1 RMT 142 RMT 183 RMT 214 RMT 255 RMT 296 RMT 327 RMT 368 RMT 399 RMT 4610 RMT 4911 RMT 5412 RMT 6013 RMT 6614 RMT 72
b . Working Pressure 6 to 12.50 Kg./Sq.cm
1 RMT 182 RMT 253 RMT 294 RMT 315 RMT 376 RMT 417 RMT 458 RMT 499 RMT 5410 RMT 5911 RMT 6712 RMT 7413 RMT 8214 RMT 90
NOTE : 1) Only 85% payment for lowering laying jointing shall be payble till satiafactory hydraulic testing is given.
Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint).
63 mm
75 mm
90 mm
110 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
355 mm
400 mm
63 mm
75 mm
90 mm
110 mm
140 mm
160 mm
180 mm
200 mm
225 mm
250 mm
280 mm
315 mm
355 mm
400 mm
NOTE : 2) Third party inspecting agency shall invarably carry out Specific gravity Test , Ash Content test and confirm in writing that those are within prescribed limits. This condition shall appear in tender conditions.
NOTE : 3) After receipt of pipes at site concerned Deputy Engineer shall confirm that weight of pipe for every class and dia is not less than the prescribed standard weight as per IS 4985/1998 ( Which is given in CSR ) underweight pipes shall be rejected .This condition shall appear in tender conditions.
G.I. 21
Section -I ( IV ) - G.I.PipesSr No Item Description Unit
1
With ED
a LIGHT
1 RMT 65 592 RMT 96 873 RMT 133 1214 RMT 166 1515 RMT 208 1896 RMT 262 2387 RMT 367 3338 RMT 434 3949 RMT 659 598
b MEDIUM
1 RMT 77 702 RMT 98 893 RMT 150 1364 RMT 190 1725 RMT 218 1986 RMT 311 2827 RMT 385 3498 RMT 505 4599 RMT 754 684
10 RMT 997 90411 150 mm RMT 1192 1081
c HEAVY
1 RMT 87 792 RMT 114 1033 RMT 178 1614 RMT 224 2035 RMT 259 2356 RMT 359 3267 RMT 462 4198 RMT 590 5359 RMT 851 772
10 RMT 1054 95611 RMT 1269 1151
Rate
( in Rs.) 2010-
2011
Rate
( in Rs.) 2010-
2011Providing ISI mark G.I. pipe of following class and dia. Including all local and central taxes, octroi, inspection charges, transportation to stores, etc. complete .as per IS 1239/2004
Note ; 2) One coupler shall be provided with each full length pipe, cost of which is included in rates below.
Without ED
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
125 mm
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
G.I. 22
Sr No Item Description Unit Rate
( in Rs.) 2010-
2011
Rate
( in Rs.) 2010-
20112
a LIGHT
1 RMT 19.002 RMT 22.003 RMT 28.004 RMT 32.005 RMT 39.006 RMT 47.007 RMT 66.008 RMT 79.009 RMT 87.00
b MEDIUM
1 RMT 21.002 RMT 23.003 RMT 29.004 RMT 33.005 RMT 42.006 RMT 50.007 RMT 73.008 RMT 83.009 RMT 87.00
10 125 mm 94.0011 150 mm 98.00
c HEAVY
1 RMT 23.002 RMT 25.003 RMT 31.004 RMT 37.005 RMT 46.006 RMT 57.007 RMT 80.008 RMT 96.00
RMT 87.0097.00
9 RMT 105.00Note : Only 85 % Payment shall be payable till satisfactory hydraulic testing is given
Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
Section -I ( V ) - S.W.PipesSr No Item Description Unit
1
1 RMT 1022 RMT 1393 RMT 1864 RMT 2245 RMT 2506 RMT 293
2
1 RMT 53.002 RMT 86.003 RMT 108.004 RMT 118.005 RMT 129.006 RMT 151.00
Note : Only 85 % Rate shall be payable till satisfactory hydraulic testing is given
Rate
( in Rs.) 2010-
2011Providing ISI standard Stoneware pipes including all taxes (Central and local), inspection charges, railway freight, unloading from railway wagons, loadng into trucks, transport to departmental stores, unloading, stacking etc. complete.as per IS 651
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
Lowering, laying and jointing in proper grade and alignment Stoneware pipes with cement joints in C. M. (1:1) proportion of following diameters including cost of conveyance from stores to site of work jointing material, labour, giving satisfactory hydraulic testing etc. complete.as per IS 1742
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
Page 24
Section - I- ( Vi )- R.C.C.Pipes
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
Collar Joints
With E.D With E.D
1
With Third Party Inspection
a Class ‘P-I’
1 RMT 363 330 321 2912 RMT 381 346 345 3143 RMT 399 363 358 3244 RMT 466 423 418 3795 RMT 532 484 479 4346 RMT 581 528 521 4747 RMT 744 676 667 6058 RMT 801 728 721 6549 RMT 1016 923 920 83510 RMT 1252 1137 1132 102711 RMT 1506 1368 1356 123112 RMT 1900 1725 1713 155513 RMT 2474 2247 2226 202214 RMT 2856 2594 2569 233315 RMT 3595 3265 3237 293916 RMT 4212 3826 3794 344517 RMT 4786 4346 4308 391318 RMT 5749 5221 5179 4703
b Class ‘P-II ’
1 RMT 387 352 345 3122 RMT 413 375 372 3373 RMT 494 448 446 4054 RMT 666 604 603 5475 RMT 788 715 710 6446 RMT 853 775 774 7037 RMT 1125 1022 1075 9758 RMT 1404 1275 1271 11549 RMT 1567 1423 1427 129510 RMT 1901 1726 1706 154911 RMT 2654 2410 2419 219712 RMT 3291 2989 2966 269413 RMT 4483 4072 4078 370314 RMT 5392 4898 4914 446315 RMT 6074 5517 6120 5558
Rubber Ring Joints
Without E.D
Without E.D
Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete. as per IS 458/1988
Note ; One Collar shall be supplied with each full length plain ended R.C.C.pipe, cost including in rates below.One rubber ring shall be supplied with each full length socketted pipe , cost including in rates below.
80 mm
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
80 mm
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
Page 25
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
Collar Joints Rubber Ring Joints
16 RMT 7352 6677 6619 6011 1000 mm
Page 26
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
Collar Joints Rubber Ring Joints
c Class ‘P-III ’
1 RMT 418 379 413 3742 RMT 451 409 446 4043 RMT 514 467 515 4674 RMT 699 635 700 6355 RMT 834 757 834 7576 RMT 975 886 976 8857 RMT 1354 1230 1354 12298 RMT 1767 1605 1767 16059 RMT 2432 2209 2432 220910 RMT 2791 2535 2792 253611 RMT 3406 3094 3407 309312 RMT 4375 3974 4376 397413 RMT 6241 5669 6241 566814 RMT 7927 7199 7927 7199
d Class ‘NP-II ’ ( For 2.00 m Length )
1 RMT 264 2672 RMT 278 2853 RMT 316 3224 RMT 397 4065 RMT 445 4546 RMT 448 4587 RMT 593 605
( For 2.50 m Length )
8 RMT 774 7889 RMT 894 91110 RMT 989 100811 RMT 1402 143012 RMT 1526 155813 RMT 2253 229914 RMT 2689 274715 RMT 3277 334616 RMT 3890 396717 RMT 4910 500718 RMT 5277 538519 RMT 6455 658920 RMT 7411 756321 RMT 9910 10113
e Class ‘NP-III ’ ( For 2.00 m Length )
1 RMT 305 3162 RMT 346 3523 RMT 381 3894 RMT 569 5815 RMT 663 6756 RMT 710 7267 RMT 789 8068 RMT 1543 15779 RMT 1883 192510 RMT 2006 2045
80 mm
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
80 mm
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1400 mm
1600 mm
1800 mm
80 mm
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
350 mm
400 mm
450 mm
Page 27
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
Collar Joints Rubber Ring Joints
11 RMT 2364 241512 RMT 2736 279513 RMT 3878 395914 RMT 4859 495615 RMT 5094 520416 RMT 6232 635917 RMT 7552 770418 RMT 8458 863019 RMT 10648 1086720 RMT 15516 1584021 RMT 19591 19990
f Class ‘NP-IV ’
1 RMT 328 3342 RMT 385 3943 RMT 436 4474 RMT 609 6245 RMT 720 7366 RMT 811 8257 RMT 1010 10308 RMT 1694 17309 RMT 1976 202210 RMT 2088 213011 RMT 2707 276212 RMT 2909 296813 RMT 4540 463514 RMT 5444 567615 RMT 6386 652116 RMT 8206 837317 RMT 8902 911518 RMT 9367 956219 RMT 13963 1425620 RMT 18236 1860821 RMT 24999 25507
2
1 RMT 36 262 RMT 44 313 RMT 66 474 RMT 87 625 RMT 103 746 RMT 115 82
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1400 mm
1600 mm
1800 mm
80 mm
100 mm
150 mm
200 mm
225 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1400 mm
1600 mm
1800 mm
Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of pipes.) Collar Joints.as per IS 783/1985
Collar Joint
Rubber Ring Joint
80 mm
100 mm
150 mm
200 mm
225 mm
250 mm
Page 28
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
Collar Joints Rubber Ring Joints
7 RMT 139 998 RMT 143 1029 RMT 182 13010 RMT 220 15711 RMT 240 17112 RMT 304 21713 RMT 344 24614 RMT 398 28415 RMT 438 31316 RMT 479 34217 RMT 666 47618 RMT 707 50519 RMT 788 56320 RMT 869 62121 RMT 950 679
Note : Only 85 % rate shall be payable till satisfactory hydraulic testing is given
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1400 mm
1600 mm
1800 mm
Page 29
Section -I ( VII ) PSC - P.S.C.PipesSr No Item Description Unit
With ED
1
Note : One rubber ring should be supplied with each pipe, cost of which is included in rates below.
a Test Pressure 2 kg/Sq.cm
1 RMT 2978 30262 RMT 3204 32553 RMT 3362 34154 RMT 3700 37605 RMT 4450 45206 RMT 4954 50327 RMT 6117 62158 RMT 7607 77289 RMT 8868 900810 RMT 10127 1028911 RMT 11702 1188912 RMT 13533 1374813 RMT 14890 1512614 RMT 17042 1731215 RMT 18901 1920216 20760 2109217 22620 22982
b Test Pressure 4 kg/Sq.cm
1 RMT 2978 30262 RMT 3205 32563 RMT 3362 34154 RMT 3700 37605 RMT 4451 45216 RMT 4955 50347 RMT 6118 62168 RMT 7608 77299 RMT 8869 901010 RMT 10130 1029111 RMT 11703 1188912 RMT 13535 1375113 RMT 14891 1512814 RMT 17045 17315
Rate ( in Rs.) 2010-2011
Without ED
Providing ISI standard Pre - stressed Cement concrete pipes (Non steel cylinder ) pipes of following class and diameter including cost of all meterial and labour required, cost of all taxes(Central and local) , inspection charges, transportaion to stores/ site, unloading and stacking etc. complete as per IS 784/2001 .
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
Page 30
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
15 RMT 18905 1920516 RMT 20765 2109517 RMT 22626 22984
c Test Pressure 6 kg/Sq.cm
1 RMT 2982 30292 RMT 3223 32743 RMT 3371 34244 RMT 3729 37875 RMT 4510 45826 RMT 5127 52087 RMT 6345 64458 RMT 7907 80349 RMT 9224 937110 RMT 10503 1066911 RMT 12166 1236012 RMT 14056 1427913 RMT 15464 1571014 RMT 17714 1799515 RMT 19674 1998616 RMT 21634 2197617 RMT 23593 23967
d Test Pressure 8 kg/Sq.cm
1 RMT 2988 30362 RMT 3246 32973 RMT 3391 34454 RMT 3781 38415 RMT 4661 47366 RMT 5385 54707 RMT 6612 67188 RMT 8244 83749 RMT 9640 979310 RMT 11030 1120511 RMT 12772 1297312 RMT 14774 1500713 RMT 16328 1658714 RMT 18709 1900615 RMT 21111 2144616 RMT 23513 2388617 RMT 25915 26325
e Test Pressure 10 kg/Sq.cm
1 RMT 3003 3051
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
Page 31
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
2 RMT 3289 33433 RMT 3510 35664 RMT 3933 39955 RMT 4862 49406 RMT 5603 56927 RMT 6951 70608 RMT 8660 87989 RMT 10143 1030410 RMT 11639 1182411 RMT 13484 1369912 RMT 15613 1586013 RMT 17648 1792814 RMT 20231 2055215 RMT 22544 2290216 RMT 24858 2525117 RMT 27171 27601
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
Page 32
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
f Test Pressure 12 kg/Sq.cm
1 RMT 3076 31252 RMT 3378 34313 RMT 3621 36794 RMT 4066 41315 RMT 5055 51366 RMT 5855 59487 RMT 7279 73958 RMT 9052 91969 RMT 10606 1077410 RMT 12159 1235211 RMT 14331 1455812 RMT 16597 1686013 RMT 18363 1865514 RMT 21029 2136315 RMT 23433 2380416 RMT 25837 2624617 RMT 28241 28687
g Test Pressure 14 kg/Sq.cm
1 RMT 3152 32022 RMT 3467 35223 RMT 3734 37934 RMT 4199 42655 RMT 5250 53346 RMT 6108 62057 RMT 7611 77328 RMT 9485 96369 RMT 11314 1149410 RMT 13001 1320811 RMT 15073 1531212 RMT 17399 1767513 RMT 19829 2014314 RMT 22722 2308315 RMT 25410 2581316 RMT 28099 2854417 RMT 30787 31275
h Test Pressure 16 kg/Sq.cm
1 RMT 3220 32712 RMT 3561 36173 RMT 3847 39084 RMT 4338 4406
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
Page 33
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
5 RMT 5443 55296 RMT 6366 64677 RMT 7941 80668 RMT 10540 107079 RMT 11862 1205010 RMT 14235 1446111 RMT 16431 1669112 RMT 18910 1921013 RMT 20874 2120514 RMT 24795 2518915 RMT 27810 2825216 RMT 30825 3131517 RMT 33840 34378
RMT
I Test Pressure 18 kg/Sq.cm
1 RMT 3295 33472 RMT 3658 37173 RMT 3959 40214 RMT 4472 45435 RMT 5636 57266 RMT 6963 70727 RMT 8687 88258 RMT 10987 111629 RMT 12911 1311710 RMT 14901 1513711 RMT 17222 1749512 RMT 19836 2015113 RMT 26175 2659114 RMT 29515 2998315 RMT 33266 3379416 RMT 37016 3760417 RMT 40767 41414
J Test Pressure 20 kg/Sq.cm
1 RMT 3372 34252 RMT 3748 38073 RMT 4074 41384 RMT 4613 46865 RMT 5836 59286 RMT 7712 78357 RMT 10260 10423
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
Page 34
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
8 RMT 12126 123209 RMT 14590 1482210 RMT 17343 1761811 RMT 21812 2215712 RMT 23999 2438013 RMT 28035 2848014 RMT 35027 3219115 RMT 35439 3600216 RMT 38778 3981317 RMT 42116 43624
2
1
2 RMT 953 RMT 1354 RMT 1635 RMT 1856 RMT 2457 RMT 2708 RMT 3039 RMT 31410 RMT 40411 RMT 53212 RMT 56913 RMT 67514 RMT 71215 RMT 89916 RMT 101117 1700 mm RMT 112618 1800 mm RMT 1191
Note : 1)Only 85 % Payment shall be payable till satisfactory hydraulic testing is given
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
Lowering laying and jointing in proper grade and alignment Prestressed cement concrete pipe with rubber ring joint including cost of conveyance from store to site of work all labour involved giving hydraulic test etc complete but excluding cost of rubber ring ( For all class of pipes )
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
NOTE : 2)Whenever manufacturer is separate& contractor for lowering laying jointing & testing is seperate the principal contractor shall enter into an aggrement with P S C pipe manufacturer for satisfactory manufacturing transporting lowering laying jointing & testing of pipe.This foot Note shall appear in tender conditions
Section -I ( VIII ) B.W.S.C. (Bar Wrapped steel Cylinder) PipesSr No Item Description Unit
With ED
1
Note : 1) Class mentioned below represents the working pressure of pipe.
a Working Pressure 4 kg/Sqcm.
1 RMT 2886 31782 RMT 3165 34853 RMT 3503 38584 RMT 3898 42925 RMT 5069 55816 RMT 5857 64497 RMT 6360 70038 RMT 8888 97869 RMT 10243 11278
10 RMT 14722 1621011 RMT 16418 1807712 RMT 19172 2110913 RMT 20565 2264314 RMT 21947 2416415 RMT 23644 2603316 RMT 25083 2761817 RMT 26781 29487
b Working Pressure 6 kg/Sqcm.
1 RMT 2888 31802 RMT 3167 34873 RMT 3506 38594 RMT 3904 42985 RMT 5075 55876 RMT 5862 64547 RMT 6366 70098 RMT 8893 97929 RMT 10248 11283
10 RMT 14728 1621511 RMT 16424 1808212 RMT 19177 2111413 RMT 20569 2264814 RMT 21952 2417015 RMT 23649 2603816 RMT 25088 27623
Rate ( in Rs.) 2010-2011
Without ED
Providing and supplying European Standard EN 639/1994 and EN 641/1994 or AWWA C-303 standard reinforced concrete pressure pipes cylinder type (Bar wrapped steel cylinder pipes suitable for overlaping steel welded joint or butt welded steel joints) of following class and diameter including cost of all material and labour required, cost of all taxes (Central and State Govt.), inspection charges, transportation to stores/ site, transit insurance, loading and unloding and stacking etc. complete.
Note : 2) For external coating at site to the joints , necessary polyethene wrapping for pouring cement slurry shall also be given free with each pipe.
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
17 RMT 26786 29492
c Working Pressure 8 kg/Sqcm.
1 RMT 2892 31832 RMT 3170 34903 RMT 3508 38634 RMT 3913 43085 RMT 5083 55976 RMT 5871 64647 RMT 6374 70198 RMT 8902 98019 RMT 10258 11293
10 RMT 14736 1622511 RMT 16432 1809212 RMT 19186 2112413 RMT 20579 2265814 RMT 21960 2418015 RMT 23658 2604816 RMT 25097 2763317 RMT 26795 29502
d Working Pressure 10 kg/Sqcm.
1 RMT 2894 31872 RMT 3174 34943 RMT 3511 38664 RMT 3924 43215 RMT 5095 56106 RMT 5883 64777 RMT 6386 70328 RMT 8914 98069 RMT 10270 11306
10 RMT 14748 1623911 RMT 16444 1810512 RMT 19198 2113713 RMT 20591 2267114 RMT 21973 2419315 RMT 23670 2606116 RMT 25109 2764617 RMT 26807 29515
e Working Pressure 12 kg/Sqcm.
1 RMT 2897 31902 RMT 3176 34973 RMT 3514 38694 RMT 3941 43385 RMT 5111 56286 RMT 5899 64957 RMT 7294 80328 RMT 8914 98159 RMT 11081 12201
10 RMT 14765 1625611 RMT 16461 1812312 RMT 19214 2115513 RMT 20607 22689
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
14 RMT 22223 2446715 RMT 24583 2706716 RMT 26609 2929717 RMT 29593 32583
f Working Pressure 14 kg/Sqcm.
1 RMT 2900 31932 RMT 3179 35003 RMT 3524 38804 RMT 4011 44175 RMT 5204 57296 RMT 6771 74557 RMT 7939 87418 RMT 9791 107809 RMT 11789 12979
10 RMT 14824 1632211 RMT 16454 1811612 RMT 19689 2167913 RMT 22249 2449714 RMT 24755 2725715 RMT 27605 3039416 RMT 30309 3337117 RMT 33161 36511
g Working Pressure 16 kg/Sqcm.
1 RMT 2903 31962 RMT 3182 35043 RMT 3648 40164 RMT 4302 47375 RMT 5586 61506 RMT 7207 79347 RMT 8636 95088 RMT 10681 117609 RMT 12983 14295
10 RMT 15636 1721611 RMT 18235 2007712 RMT 21723 2391713 RMT 24521 2699814 RMT 27346 3011015 RMT 30410 3348216 RMT 33755 3716617 RMT 37665 41470
h Working Pressure 18 kg/Sqcm.
1 RMT 2907 32002 RMT 3230 35563 RMT 3763 41434 RMT 4431 48795 RMT 5796 63826 RMT 7620 83897 RMT 8994 99028 RMT 11116 122399 RMT 13561 14931
10 RMT 16318 1796711 RMT 19014 20934
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
12 RMT 22577 2485713 RMT 25800 28406
1300 mm
1400 mm
Sr No Item Description Unit
With ED
Rate ( in Rs.) 2010-2011
Without ED
14 RMT 28496 3137515 RMT 32325 3559116 RMT 35851 3947217 RMT 39681 43689
I Working Pressure 20 kg/Sqcm.
1 RMT 2897 31892 RMT 3411 37553 RMT 3896 42904 RMT 4723 52005 RMT 6179 68036 RMT 8034 88467 RMT 9807 107988 RMT 12110 133339 RMT 14817 16314
10 RMT 17782 1957811 RMT 20674 2276212 RMT 24558 2703913 RMT 28303 3116314 RMT 31875 3509515 RMT 35602 3919916 RMT 39772 4379017 RMT 44026 48473
Note ; 2) For field welding rates applicable for similar welding in M.S. pipes given in that section shall be adopted.
1500 mm
1600 mm
1700 mm
1800 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
1300 mm
1400 mm
1500 mm
1600 mm
1700 mm
1800 mm
Note ; 1) For lowering , laying and pouring of cement mortar in the field on joints ( after laying and welding ), rates as per P.S.C. pipes lowering, laying and jointing shall be adopted.
NOTE : 3) Whenever manufacturer is separate& contractor for lowering laying jointing & testing is seperate the principal contractor shall enter into an aggrement with B.W. S C pipe manufacturer for satisfactory manufacturing transporting lowering laying jointing & testing of pipe.This foot Note shall appear in tender conditions
NOTE : 4) No negative tolerance shall be accepted for the M.S.shell thickness of B.W.S.C. pipes over the thickness mentioned in EN 641 or AWW AC 303
Page 40
Section - I- ( IX ) - G.R.P./F.R.P. PipesSr No Item Description Unit
With ED
1
A Class (SN) 2500
a 3 Kg/Sq. cm
1 300mm RMT 1229 13712 350mm RMT 1422 15863 400mm RMT 1565 17454 450mm RMT 1761 19655 500mm RMT 1992 22226 600mm RMT 2559 28557 700mm RMT 3181 35488 800mm RMT 3906 43579 900mm RMT 4773 5324
10 1000mm RMT 5662 631511 1100mm RMT 6883 767712 1200mm RMT 8013 893813 1300mm RMT 9074 1012114 1400mm RMT 10477 1168515 1500mm RMT 11907 1328016 1600mm RMT 13867 1546617 1700mm RMT 16573 1826918 1800mm RMT 18085 1993519 1900mm RMT 20216 2228420 2000mm RMT 21856 2409221 2100mm RMT 24424 2692322 2200mm RMT 26217 2889923 2300mm RMT 28333 3123224 2400mm RMT 30286 33384
b 6 Kg/Sq. cm
1 300mm RMT 1275 14222 350mm RMT 1458 16263 400mm RMT 1638 18274 450mm RMT 1819 20295 500mm RMT 2068 23076 600mm RMT 2679 29887 700mm RMT 3331 3715
Rate ( in Rs.)2010-2011
Without ED.
Providing & supplying Glass fibre reinforced polyester pipes confirming to BIS 12709 / BIS 14402 with double bell REKA - GRP couplings EPDM rubber gaskets for sealing of follosing pressure diameter and stiffness class including cost of all material and labour required cost of all taxes (Central and local) insurance, transportation to site of work / store unloading and stacking etc. complete.
Page 41
Sr No Item Description Unit
With ED
Rate ( in Rs.)2010-2011
Without ED.
8 800mm RMT 4081 45529 900mm RMT 4972 5545
10 1000mm RMT 5913 659511 1100mm RMT 7166 799212 1200mm RMT 8293 924913 1300mm RMT 9489 1058314 1400mm RMT 10857 1210915 1500mm RMT 12385 1381416 1600mm RMT 14445 1611117 1700mm RMT 17271 1903818 1800mm RMT 18793 2071519 1900mm RMT 21029 2318120 2000mm RMT 22710 2503321 2100mm RMT 25389 2798722 2200mm RMT 27360 3015923 2300mm RMT 29488 3250424 2400mm RMT 31489 34710
c 9 Kg/Sq. cm
1 300mm RMT 1316 14682 350mm RMT 1530 17063 400mm RMT 1705 19024 450mm RMT 1933 21575 500mm RMT 2192 24456 600mm RMT 2843 31717 700mm RMT 3541 39498 800mm RMT 4410 49199 900mm RMT 5387 6009
10 1000mm RMT 6378 711411 1100mm RMT 7708 859812 1200mm RMT 8950 998313 1300mm RMT 10335 1152714 1400mm RMT 11875 1324515 1500mm RMT 13488 1504416 1600mm RMT 15747 1756417 1700mm RMT 18867 2079718 1800mm RMT 20633 2274419 1900mm RMT 22921 2526620 2000mm RMT 24872 2741621 2100mm RMT 27678 3051022 2200mm RMT 29755 3279923 2300mm RMT 32129 3541524 2400mm RMT 34649 38193
Page 42
Sr No Item Description Unit
With ED
Rate ( in Rs.)2010-2011
Without ED.
d 12 Kg/Sq. cm
1 300mm RMT 1395 15562 350mm RMT 1610 17963 400mm RMT 1793 20004 450mm RMT 2342 26135 500mm RMT 2029 22646 600mm RMT 3054 34077 700mm RMT 3788 42258 800mm RMT 4693 52349 900mm RMT 5754 6418
10 1000mm RMT 6859 765011 1100mm RMT 8406 937712 1200mm RMT 9805 1093613 1300mm RMT 11097 1237814 1400mm RMT 12772 1424615 1500mm RMT 14604 1628916 1600mm RMT 16938 1889217 1700mm RMT 20334 2241418 1800mm RMT 22293 2457319 1900mm RMT 24676 2720020 2000mm RMT 26835 2958021 2100mm RMT 29916 3297622 2200mm RMT 32284 35587
e 15 Kg/Sq. cm
1 300mm RMT 1452 16202 350mm RMT 1677 18713 400mm RMT 1865 20804 450mm RMT 2150 23985 500mm RMT 2471 27566 600mm RMT 3265 36427 700mm RMT 4073 45438 800mm RMT 5082 56699 900mm RMT 6264 6987
10 1000mm RMT 7434 829211 1100mm RMT 9121 1017312 1200mm RMT 10583 1180413 1300mm RMT 12147 1354914 1400mm RMT 13982 1559515 1500mm RMT 15862 1769216 1600mm RMT 18404 2052717 1700mm RMT 22403 2469518 1800mm RMT 24483 26988
Page 43
Sr No Item Description Unit
With ED
Rate ( in Rs.)2010-2011
Without ED.
19 1900mm RMT 27338 3013420 2000mm RMT 29752 32796
B Class (SN) 5000
a 3 Kg/Sq. cm
1 300mm RMT 1317 14702 350mm RMT 1546 17243 400mm RMT 1761 19654 450mm RMT 2004 22345 500mm RMT 2216 24726 600mm RMT 2889 32227 700mm RMT 3616 40338 800mm RMT 4482 49999 900mm RMT 5519 6155
10 1000mm RMT 6564 732111 1100mm RMT 7956 887412 1200mm RMT 9325 1040113 1300mm RMT 10618 1184314 1400mm RMT 12204 1361215 1500mm RMT 13926 1553316 1600mm RMT 16190 1805817 1700mm RMT 19400 2138518 1800mm RMT 21277 2345419 1900mm RMT 23682 2610520 2000mm RMT 25758 2839421 2100mm RMT 28677 3161122 2200mm RMT 30954 34120
b 6 Kg/Sq. cm
1 300mm RMT 1338 14922 350mm RMT 1572 17533 400mm RMT 1737 19384 450mm RMT 1980 22095 500mm RMT 2282 25456 600mm RMT 2952 32927 700mm RMT 3708 41368 800mm RMT 4589 51199 900mm RMT 5653 6305
10 1000mm RMT 6711 748511 1100mm RMT 8208 915412 1200mm RMT 9540 1064113 1300mm RMT 10902 1216014 1400mm RMT 12509 1395215 1500mm RMT 14252 15896
Page 44
Sr No Item Description Unit
With ED
Rate ( in Rs.)2010-2011
Without ED.
16 1600mm RMT 16589 1850217 1700mm RMT 19874 2190718 1800mm RMT 21791 2402019 1900mm RMT 24274 2675720 2000mm RMT 26446 2915221 2100mm RMT 29420 3242922 2200mm RMT 31804 35057
c 9 Kg/Sq. cm
1 300mm RMT 1387 15472 350mm RMT 1625 18133 400mm RMT 1829 20404 450mm RMT 2082 23235 500mm RMT 2382 26576 600mm RMT 3273 36507 700mm RMT 3886 43348 800mm RMT 5005 55829 900mm RMT 5909 6590
10 1000mm RMT 7049 786111 1100mm RMT 11381 1269412 1200mm RMT 12948 1444213 1300mm RMT 14588 1627114 1400mm RMT 16330 1821315 1500mm RMT 18707 2086616 1600mm RMT 21252 2370317 1700mm RMT 25586 2820418 1800mm RMT 27880 30732
d 12 Kg/Sq. cm
1 300mm RMT 1426 15912 350mm RMT 1692 18873 400mm RMT 1870 20864 450mm RMT 2165 24155 500mm RMT 2473 27586 600mm RMT 3265 36427 700mm RMT 4116 45918 800mm RMT 5080 56669 900mm RMT 6344 7076
10 1000mm RMT 7461 832211 1100mm RMT 9170 1022912 1200mm RMT 10657 1188613 1300mm RMT 12214 1362314 1400mm RMT 14074 1569815 1500mm RMT 15986 17831
Page 45
Sr No Item Description Unit
With ED
Rate ( in Rs.)2010-2011
Without ED.
16 1600mm RMT 18476 2060717 1700mm RMT 22241 2451618 1800mm RMT 24450 2695119 1900mm RMT 27095 29866
e 15 Kg/Sq. cm
1 300mm RMT 1477 16472 350mm RMT 1758 19623 400mm RMT 1966 21934 450mm RMT 2271 25335 500mm RMT 2591 28906 600mm RMT 3439 38367 700mm RMT 4328 48278 800mm RMT 5415 60409 900mm RMT 6679 7450
10 1000mm RMT 7963 888211 1100mm RMT 9685 1080212 1200mm RMT 11348 1265713 1300mm RMT 12967 1446314 1400mm RMT 14962 1668815 1500mm RMT 17018 1898116 1600mm RMT 19703 2197517 1700mm RMT 23659 2607918 1800mm RMT 26057 28722
Note :3) Only 85 % Payment shall be payable till satisfactory hydraulic testing is given
Note :1) For lowering , laying & jointing rates of G.R.P. pipes 50% rates for lowering , laying & jointing of P.S.C. Pipes of corrosponding diameter shall be adopted.
Note : 2) Whenever manufacturer is separate& contractor for lowering laying jointing & testing is seperate the principal contractor shall enter into an aggrement with G.R.P. pipe manufacturer for satisfactory manufacturing transporting lowering laying jointing & testing of pipe.This foot Note shall appear in tender conditions
Page 46
Section - I - ( XI ) - P.C.C.P. PipesSr No Item Description Unit
With E.D.
1
a TP 4Kg/Sq.Cm.
1 350 mm RMT 3827 34752 400 mm RMT 4208 38213 450mm RMT 4621 41974 500 mm RMT 5114 46455 600 mm RMT 6184 56176 700 mm RMT 7145 64897 800 mm RMT 8044 73068 900 mm RMT 9859 89559 1000 mm RMT 11386 1034110 1100mm RMT 12749 1157911 1200mm RMT 14017 1273112 1300 mm RMT 16195 1470913 1400mm RMT 17585 1597114 1500 mm RMT 18856 1712615 1600 mm RMT 20127 1828016 1700mm RMT 21398 1943517 1800mm RMT 22669 20589
b TP 5.5 Kg/Sq.Cm.
1 350 mm RMT 3827 34752 400 mm RMT 4227 38403 450mm RMT 4645 42204 500 mm RMT 5144 46725 600 mm RMT 6226 56556 700 mm RMT 7202 65407 800 mm RMT 8139 73928 900 mm RMT 9951 90389 1000 mm RMT 11499 1044410 1100mm RMT 12895 1171311 1200mm RMT 14710 1336112 1300 mm RMT 16434 1492613 1400mm RMT 17889 1624814 1500 mm RMT 19162 1740315 1600 mm RMT 20433 1855816 1700mm RMT 21704 1971317 1800mm RMT 22975 20867
c TP 7 Kg/Sq.Cm.
1 350 mm RMT 3836 3484
Rate ( in Rs.) 2010-
2011Without
EDProviding and supplying Prestressed Concrete Cylinder Pipes suitable for sliding overlap weld joint or confined rubber ring joint with necessary rubber ring of following class and diameters including cost of all taxes (Central and local) inspection charges, transportation to site of work / store, transit insurance, unloading and stacking etc. complete.
Page 47
Sr No Item Description Unit
With E.D.
Rate ( in Rs.) 2010-
2011Without
ED2 400 mm RMT 4245 38553 450mm RMT 4668 42404 500 mm RMT 5171 46975 600 mm RMT 6269 56946 700 mm RMT 7270 66037 800 mm RMT 8256 74988 900 mm RMT 10079 91549 1000 mm RMT 11672 1060210 1100mm RMT 13108 1190511 1200mm RMT 14966 1359212 1300 mm RMT 16734 1519913 1400mm RMT 18391 1670414 1500 mm RMT 19191 1742915 1600 mm RMT 20462 1858516 1700mm RMT 21733 1973917 1800mm RMT 23004 20893
d TP 8.5 Kg/Sq.Cm.
1 350 mm RMT 3851 34982 400 mm RMT 4266 38753 450mm RMT 4692 42614 500 mm RMT 5202 47245 600 mm RMT 6324 57446 700 mm RMT 7354 66797 800 mm RMT 8372 76048 900 mm RMT 10222 92849 1000 mm RMT 11847 1076010 1100mm RMT 13321 1209911 1200mm RMT 15349 1394112 1300 mm RMT 17175 1559913 1400mm RMT 18741 1702114 1500 mm RMT 19539 1774615 1600 mm RMT 20810 1890116 1700mm RMT 22081 2005517 1800mm RMT 23352 21210
e TP 10 Kg/Sq.Cm.
1 350 mm RMT 3865 35112 400 mm RMT 4283 38913 450mm RMT 4721 42884 500 mm RMT 5245 47635 600 mm RMT 6386 57996 700 mm RMT 7439 67567 800 mm RMT 8499 77198 900 mm RMT 10363 94129 1000 mm RMT 12023 1091910 1100mm RMT 13654 12402
Page 48
Sr No Item Description Unit
With E.D.
Rate ( in Rs.) 2010-
2011Without
ED11 1200mm RMT 15610 1417812 1300 mm RMT 17482 1587813 1400mm RMT 19099 1734714 1500 mm RMT 19899 1807315 1600 mm RMT 21170 1922816 1700mm RMT 22441 2038217 1800mm RMT 23712 21536
f TP11.5 Kg/Sq.Cm.
1 350 mm RMT 3881 35252 400 mm RMT 4310 39153 450mm RMT 4758 43204 500 mm RMT 5289 48035 600 mm RMT 6450 58596 700 mm RMT 7523 68327 800 mm RMT 8735 79348 900 mm RMT 10506 95439 1000 mm RMT 12198 1107910 1100mm RMT 13873 1260011 1200mm RMT 15873 1441612 1300 mm RMT 17791 1615913 1400mm RMT 19461 1767614 1500 mm RMT 20260 1840115 1600 mm RMT 21531 1955616 1700mm RMT 22802 2071017 1800mm RMT 24073 21864
g TP 13 Kg/Sq.Cm.
1 350 mm RMT 3912 35522 400 mm RMT 4346 39473 450mm RMT 4796 43564 500 mm RMT 5333 48435 600 mm RMT 6512 59146 700 mm RMT 7608 69097 800 mm RMT 8879 80658 900 mm RMT 10649 96729 1000 mm RMT 12454 1131110 1100mm RMT 14093 1280011 1200mm RMT 16138 1465712 1300 mm RMT 18107 1644513 1400mm RMT 19819 1800014 1500 mm RMT 20617 1872615 1600 mm RMT 21888 1988016 1700mm RMT 23159 2103417 1800mm RMT 24430 22179
h TP 14.5 Kg/Sq.Cm.
Page 49
Sr No Item Description Unit
With E.D.
Rate ( in Rs.) 2010-
2011Without
ED1 350 mm RMT 3945 35832 400 mm RMT 4386 39833 450mm RMT 4843 43994 500 mm RMT 5383 48895 600 mm RMT 6578 59746 700 mm RMT 8107 73637 800 mm RMT 9023 81958 900 mm RMT 10894 98959 1000 mm RMT 12636 1147610 1100mm RMT 14314 1300011 1200mm RMT 16401 1489612 1300 mm RMT 18415 1672513 1400mm RMT 20714 1881414 1500 mm RMT 21513 1953915 1600 mm RMT 22784 2069416 1700mm RMT 24055 2184817 1800mm RMT 25326 23002
I TP17 Kg/Sq.Cm.
1 350 mm RMT 3975 36112 400 mm RMT 4426 40203 450mm RMT 4893 44444 500 mm RMT 5442 49425 600 mm RMT 6662 60506 700 mm RMT 7781 70687 800 mm RMT 9198 83558 900 mm RMT 11050 100359 1000 mm RMT 12821 1164410 1100mm RMT 14544 1321011 1200mm RMT 16667 1513812 1300 mm RMT 18728 1701013 1400mm RMT 21115 1917714 1500 mm RMT 21913 1990215 1600 mm RMT 23184 2105716 1700mm RMT 24455 2221117 1800mm RMT 25726 23366
j TP 18.5 Kg/Sq.Cm.
1 350 mm RMT 4007 36392 400 mm RMT 4466 40563 450mm RMT 4942 44894 500 mm RMT 5501 49965 600 mm RMT 6747 61286 700 mm RMT 7878 71567 800 mm RMT 9501 86298 900 mm RMT 11243 102119 1000 mm RMT 13041 11844
Page 50
Sr No Item Description Unit
With E.D.
Rate ( in Rs.) 2010-
2011Without
ED10 1100mm RMT 14773 1341711 1200mm RMT 16935 1538112 1300 mm RMT 19627 1782713 1400mm RMT 21662 1967414 1500 mm RMT 22009 1998915 1600 mm RMT 23280 2114416 1700mm RMT 24551 2229817 1800mm RMT 25822 23453
k TP 20 Kg/Sq.Cm.
1 350 mm RMT 4039 36682 400 mm RMT 4507 40943 450mm RMT 4992 45344 500 mm RMT 5564 50535 600 mm RMT 6832 62056 700 mm RMT 8073 73327 800 mm RMT 9730 88368 900 mm RMT 11501 104459 1000 mm RMT 13344 1211910 1100mm RMT 15122 1373411 1200mm RMT 17820 1618512 1300 mm RMT 20051 1821113 1400mm RMT 22140 2010814 1500 mm RMT 22486 2042315 1600 mm RMT 23757 2157716 1700mm RMT 25028 2273217 1800mm RMT 26299 23886
l TP 21.5 Kg/Sq.Cm.
1 350 mm RMT 4073 37002 400 mm RMT 4546 41303 450mm RMT 5041 45794 500 mm RMT 5623 51075 600 mm RMT 6931 6295
Page 51
Sr No Item Description Unit
With E.D.
Rate ( in Rs.) 2010-
2011Without
ED6 700 mm RMT 8470 76937 800 mm RMT 9884 89768 900 mm RMT 11755 106769 1000 mm RMT 13647 1239410 1100mm RMT 15885 1442711 1200mm RMT 18263 1658712 1300 mm RMT 20515 1863313 1400mm RMT 23355 2121214 1500 mm RMT 23703 2152715 1600 mm RMT 24974 2268316 1700mm RMT 26245 2383717 1800mm RMT 27516 24991
m TP 23 Kg/Sq.Cm.
1 350 mm RMT 4104 37282 400 mm RMT 4587 41663 450mm RMT 5092 46244 500 mm RMT 5683 51615 600 mm RMT 7076 64286 700 mm RMT 8737 79367 800 mm RMT 10185 92518 900 mm RMT 12010 109089 1000 mm RMT 13949 1267010 1100mm RMT 16304 1480811 1200mm RMT 18712 1699512 1300 mm RMT 21101 1916513 1400mm RMT 23789 2160614 1500 mm RMT 24135 2192015 1600 mm RMT 25406 2307516 1700mm RMT 26677 2422917 1800mm RMT 27948 25384
n TP 24.5 Kg/Sq.Cm.
1 350 mm RMT 4137 37572 400 mm RMT 4628 42033 450mm RMT 5141 46704 500 mm RMT 5743 52165 600 mm RMT 7361 66866 700 mm RMT 8858 80457 800 mm RMT 10371 94198 900 mm RMT 12212 110929 1000 mm RMT 14606 1326510 1100mm RMT 16726 1519111 1200mm RMT 19166 1740812 1300 mm RMT 22770 2068113 1400mm RMT 24243 2201914 1500 mm RMT 24586 22330
Page 52
Sr No Item Description Unit
With E.D.
Rate ( in Rs.) 2010-
2011Without
ED15 1600 mm RMT 25857 2348516 1700mm RMT 27128 2463917 1800mm RMT 28399 25793
Note ; 1) For P.C.C.P pipes lowering , laying and pouring of cement mortar in the field on joints (after laying and welding ), rates as per P.S.C. pipes lowering, laying and jointing shall be adopted.
Note ; 2) For field welding rates applicable for similar welding in M.S. pipes given in that section shall be adopted.
NOTE : 3) Whenever manufacturer is separate& contractor for lowering laying jointing & testing is seperate the principal contractor shall enter into an aggrement with P C C P pipe manufacturer for satisfactory manufacturing transporting lowering laying jointing & testing of pipe.This foot Note shall appear in tender conditions
Page 53
Section - I - ( X ) - MDPE.PipesSr No Item Description Unit
With E.D.
1
PN 16 (SDR 9)
i) 20 mm Rmt 27 25ii) 25 mm Rmt 38 35iii) 32 mm Rmt 63 58iv) 40 mm Rmt 97 88v) 50 mm Rmt 148 134vi) 63 mm Rmt 208 188vii) 75 mm Rmt 294 266viii) 90 mm Rmt 422 383ix) 110 mm Rmt 627 569x) 125 mm Rmt 809 734xi) 140 mm Rmt 1013 919xii) 160 mm Rmt 1326 1203vii) 180 mm Rmt 1674 1518viii) 200 mm Rmt 2066 1874ix) 225 mm Rmt 2613 2370x) 250 mm Rmt 3213 2915xi) 280 mm Rmt 4041 3666xii) 315 mm Rmt 5107 4633
B) PN 12.5 (SDR 11)i) 25 mm Rmt 35 32ii) 32 mm Rmt 59 54iii) 40 mm Rmt 90 82iv) 50 mm Rmt 127 115v) 63 mm Rmt 172 156vi) 75 mm Rmt 241 219vii) 90 mm Rmt 349 317viii) 110 mm Rmt 518 470ix) 125 mm Rmt 668 606
Rate ( in Rs.)2010-2011
Without ED
Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC / CIPET (India) / DVGM / KIWA / SPGN etc. for usage in Drinking Water syatem The cost shall include testing of all materials, all taxes Central,Sate ,Municipal,Inspection charges, transportation up to site, transitinsurance, loading, unloading, stacking etc. complete as specified and directed.
Page 54
Sr No Item Description Unit
With E.D.
Rate ( in Rs.)2010-2011
Without ED
x) 140 mm Rmt 837 760xi) 160 mm Rmt 1092 991xii) 180 mm Rmt 1381 1253vii) 200 mm Rmt 1703 1545viii) 225 mm Rmt 2157 1957ix) 250 mm Rmt 2653 2407x) 280 mm Rmt 3327 3018xi) 315 mm Rmt 4213 3822
C) PN 10 (SDR 13.6)i) 63 mm Rmt 143 130ii) 75 mm Rmt 203 184iii) 90 mm Rmt 293 265iv) 110 mm Rmt 431 391v) 125 mm Rmt 555 503vi) 140 mm Rmt 696 631vii) 160 mm Rmt 907 822viii) 180 mm Rmt 1151 1044ix) 200 mm Rmt 1754 1591x) 225 mm Rmt 1791 1625xi) 250 mm Rmt 2205 2000xii) 280 mm Rmt 2762 2506vii) 315 mm Rmt 3488 3164
D) PN 8 (SDR 17)i) 63 mm Rmt 119 108ii) 75 mm Rmt 167 152iii) 90 mm Rmt 240 218iv) 110 mm Rmt 356 323v) 125 mm Rmt 461 418vi) 140 mm Rmt 577 524vii) 160 mm Rmt 751 682viii) 180 mm Rmt 950 862ix) 200 mm Rmt 1170 1061x) 225 mm Rmt 1482 1344xi) 250 mm Rmt 1824 1655xii) 280 mm Rmt 2290 2077
315 mm Rmt 2895 2626E) PN 6 (SDR 21)
i) 63 mm Rmt 92 84ii) 75 mm Rmt 133 121iii) 90 mm Rmt 188 170
Page 55
Sr No Item Description Unit
With E.D.
Rate ( in Rs.)2010-2011
Without ED
iv) 110 mm Rmt 276 250v) 125 mm Rmt 356 323vi) 140 mm Rmt 449 407vii) 160 mm Rmt 584 530viii) 180 mm Rmt 737 669ix) 200 mm Rmt 899 815x) 225 mm Rmt 1152 1045xi) 250 mm Rmt 1416 1284
280 mm Rmt 1775 1610315 mm Rmt 2249 2040
2
1 Couplers 20 No. 1542 Couplers 25 No. 1543 Couplers 32 No. 1544 Couplers 40 No. 1735 Couplers 50 No. 2176 Couplers 63 No. 2807 Couplers 75 No. 5368 Couplers 90 No. 6159 Couplers 110 No. 941
10 Couplers 125 No. 105511 Couplers 140 No. 148812 Couplers 160 No. 159913 Couplers 180 No. 225414 Couplers 200 No. 253015 Couplers 225 No. 318916 Couplers 250 No. 510017 Couplers 280 No. 560018 Couplers 315 No. 6116
19 Equal Tee 20 No. 58020 Equal Tee 25 No. 593
Providing & Supply of Electro Fusion Fittings in accordance with BS EN12201: Part-3 suitable for drinking water with in black/ blue colour manufactured from compounded PE80/ PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR11 with min PN12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central, state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.
Page 56
Sr No Item Description Unit
With E.D.
Rate ( in Rs.)2010-2011
Without ED
21 Equal Tee 32 No. 60722 Equal Tee 40 No. 72723 Equal Tee 50 No. 76124 Equal Tee 63 No. 87225 Equal Tee 75 No. 120326 Equal Tee 90 No. 175227 Equal Tee 110 No. 236028 Equal Tee 125 No. 310429 Equal Tee 160 No. 538030 Equal Tee 180 No. 791131 Equal Tee 200 No. 1091032 Equal Tee 225 No. 1240033 Equal Tee 250 No. 18200
34 Elbow 90 Deg. 20 No. 11235 Elbow 90 Deg. 25 No. 11236 Elbow 90 Deg. 32 No. 12637 Elbow 90 Deg. 40 No. 15338 Elbow 90 Deg. 50 No. 18139 Elbow 90 Deg. 63 No. 25240 Elbow 90 Deg. 75 No. 39441 Elbow 90 Deg. 90 No. 46542 Elbow 90 Deg. 110 No. 64143 Elbow 90 Deg. 125 No. 81644 Elbow 90 Deg. 160 No. 178645 Elbow 90 Deg. 180 No. 207046 Elbow 90 Deg. 200 No. 267947 Elbow 90 Deg. 225 No. 584048 Elbow 90 Deg. 250 No. 10943
49 Elbow 45 Deg. 32 No. 12650 Elbow 45 Deg. 40 No. 15351 Elbow 45 Deg. 50 No. 18152 Elbow 45 Deg. 63 No. 25253 Elbow 45 Deg. 75 No. 39454 Elbow 45 Deg. 45 No. 46555 Elbow 45 Deg. 110 No. 64156 Elbow 45 Deg. 125 No. 81657 Elbow 45 Deg. 160 No. 150358 Elbow 45 Deg. 180 No. 197059 Elbow 45 Deg. 200 No. 207060 Elbow 45 Deg. 225 No. 2679
Page 57
Sr No Item Description Unit
With E.D.
Rate ( in Rs.)2010-2011
Without ED
61 Elbow 45 Deg. 250 No. 5840
62 Reducer 25X20 No. 18163 Reducer 32X20 No. 18164 Reducer 32X25 No. 18165 Reducer 40X32 No. 17966 Reducer 50X32 No. 17967 Reducer 50X40 No. 17968 Reducer 63X32 No. 21769 Reducer 63X40 No. 21770 Reducer 63X50 No. 21771 Reducer 90X63 No. 53672 Reducer 110X75 No. 69773 Reducer 110X90 No. 69774 Reducer 125X90 No. 77475 Reducer 160X110 No. 136976 Reducer 180X125 No. 170577 Reducer 200X160 No. 202078 Reducer 225X160 No. 295579 Reducer 250X160 No. 408280 Reducer 250X200 4465
81 End Cap 20 No. 4082 End Cap 25 No. 4083 End Cap 32 No. 5584 End Cap 40 No. 6085 End Cap 50 No. 6486 End Cap 63 No. 8487 End Cap 75 No. 30888 End Cap 90 No. 35189 End Cap 110 No. 49390 End Cap 125 No. 62491 End Cap 140 No. 102192 End Cap 160 No. 110693 End Cap 180 No. 128694 End Cap 200 No. 205595 End Cap 225 No. 353096 End Cap 250 No. 455097 End Cap 315 No. 7527
98 Ferrule tapping tee 63 x 1/2" No. 79999 Ferrule tapping tee 63 x 3/4" No. 799
Page 58
Sr No Item Description Unit
With E.D.
Rate ( in Rs.)2010-2011
Without ED
100 Ferrule tapping tee 63 x 1" No. 799101 Ferrule tapping tee 75 x 1/2" No. 799102 Ferrule tapping tee 75 x 3/4" No. 799103 Ferrule tapping tee 75 x 1" No. 799104 Ferrule tapping tee 90 x 1/2" No. 799105 Ferrule tapping tee 90 x 3/4" No. 799106 Ferrule tapping tee 90 x 1" No. 799107 Ferrule tapping tee 90 x 11/4" No. 1037108 Ferrule tapping tee 90 x 11/2" No. 1037109 Ferrule tapping tee 90 x 2" No. 1037110 Ferrule tapping tee 110 x 1/2" No. 799111 Ferrule tapping tee 110 x 3/4" No. 799112 Ferrule tapping tee 110 x 1" No. 799113 Ferrule tapping tee 110 x 11/4" No. 1037114 Ferrule tapping tee 100 x 11/2" No. 1037115 Ferrule tapping tee 110 x 2" No. 1037116 Ferrule tapping tee 160 x 1/2" No. 799117 Ferrule tapping tee 160 x 3/4" No. 799118 Ferrule tapping tee 160 x 1" No. 799119 Ferrule tapping tee 160 x 11/4" No. 1132120 Ferrule tapping tee 160 x 11/2" No. 1132121 Ferrule tapping tee 160 x 2" No. 1132122 Ferrule tapping tee 200 x 1/2" No. 1128123 Ferrule tapping tee 200 x 3/4" No. 1128124 Ferrule tapping tee 200 x 1" No. 1128125 Ferrule tapping tee 200 x 11/4" No. 1632126 Ferrule tapping tee 200 x 11/2" No. 1632127 Ferrule tapping tee 200 x 2" No. 1632128 Ferrule tapping tee 250 x 1/2" No. 1128129 Ferrule tapping tee 250 x 3/4" No. 1128130 Ferrule tapping tee 250 x 1" No. 1128131 Ferrule tapping tee 250 x 11/4" No. 1632132 Ferrule tapping tee 250 x 11/2" No. 1632133 Ferrule tapping tee 250 x 2" No. 1632134 Ferrule tapping tee 315 x 1/2" No. 1344135 Ferrule tapping tee 315 x 3/4" No. 1344136 Ferrule tapping tee 315 x 1" No. 1344137 Ferrule tapping tee 315 x 11/4" No. 1824138 Ferrule tapping tee 315 x 11/2" No. 1824139 Ferrule tapping tee 315 x 2" No. 1824
Page 59
Sr No Item Description Unit
With E.D.
Rate ( in Rs.)2010-2011
Without ED
3
Compression Fittings List Price
Description1 Male Adaptor 20x1/2" No. 682 Male Adaptor 25x3/4" No. 783 Male Adaptor 32x1" No. 1004 Male Adaptor 40x1 1/4" No. 1845 Male Adaptor 50x1 1/2" No. 2416 Male Adaptor 63x2" No. 3447 Female Adaptor 20x1/2" No. 738 Female Adaptor 25x3/4" No. 869 Female Adaptor 32x1" No. 108
10 Female Adaptor 40x1 1/4" No. 20211 Female Adaptor 50x1 1/2" No. 25912 Female Adaptor 63x2" No. 36513 Coupling 20x20 No. 7014 Coupling 25x25 No. 7715 Coupling 32x32 No. 9816 Coupling 40x40 No. 18717 Coupling 50x50 No. 24018 Coupling 63x63 No. 34719 Reducing Coupling 25x20 No. 12820 Reducing Coupling 32x20 No. 16921 Reducing Coupling 32x25 No. 16922 Reducing Coupling 40x25 No. 28923 Reducing Coupling 40x32 No. 28924 Reducing Coupling 50x32 No. 37425 Reducing Coupling 50x40 No. 37426 Reducing Coupling 63x50 No. 53027 90 Deg. Elbow 20 No. 13028 90 Deg. Elbow 25 No. 15529 90 Deg. Elbow 32 No. 19030 90 Deg. Elbow 40 No. 312
Providing & Supply of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shall be tested as per ISO:3459, ISO:3501 & ISO:3503,suitable for drinking water & approved by WRAS, UK/ KIWA etc, in food grade polypropylene and shall be inclusive of all cost such as testing, all taxes related to central, state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete.
Page 60
Sr No Item Description Unit
With E.D.
Rate ( in Rs.)2010-2011
Without ED
31 90 Deg. Elbow 50 No. 44332 90 Deg. Elbow 63 No. 60033 90 Deg. Elbow threaded male off take 20x1/2" No. 7834 90 Deg. Elbow threaded male off take 25x3/4" No. 9535 90 Deg. Elbow threaded male off take 32x1" No. 12336 90 Deg. Elbow threaded male off take 40x11/4" No. 19737 90 Deg. Elbow threaded male off take 50x11/2" No. 26938 90 Deg. Elbow threaded male off take 63x2" No. 37439 90 Deg. Elbow threaded female off take 20x1/2" No. 8940 90 Deg. Elbow threaded female off take 25x3/4" No. 11041 90 Deg. Elbow threaded female off take 32x1" No. 13242 90 Deg. Elbow threaded female off take 40x11/4" No. 25743 90 Deg. Elbow threaded female off take 50x11/2" No. 34444 90 Deg. Elbow threaded female off take 63x2" No. 46645 Equal Tee 20x20x20 No. 15546 Equal Tee 25x25x25 No. 20447 Equal Tee 32x32x32 No. 26448 Equal Tee 40x40x40 No. 43649 Equal Tee 50x50x50 No. 59050 Equal Tee 63x63x63 No. 83951 End Cap 20 No. 4052 End Cap 25 No. 4053 End Cap 32 No. 5554 End Cap 40 No. 6055 End Cap 50 No. 6456 End Cap 63 No. 84
Section - I - ( X ) - H.D.P.E.PipesSr No Item Description Unit
With E.D. Without ED
1
A P.E. 100
a 6 Kg/Sq. Cm
1 63 mm RMT 78 712 75 mm RMT 112 1013 90 mm RMT 156 1424 110 mm RMT 227 2065 125mm RMT 309 2806 140 mm RMT 388 3527 160 mm RMT 503 4578 180 mm RMT 634 5769 200 mm RMT 744 675
10 225mm RMT 959 87011 250 mm RMT 1177 106812 280 mm RMT 1476 133913 315 mm RMT 1870 169614 355mm RMT 2370 215015 400mm RMT 3105 281716 450mm RMT 4090 371117 500mm RMT 5058 458818 560mm RMT 6331 574319 630mm RMT 10334 937520 710mm RMT 10956 9939
b 8 Kg/Sq. Cm
1 63 mm RMT 98 892 75 mm RMT 146 1333 90 mm RMT 196 1784 110 mm RMT 289 2625 125mm RMT 392 3556 140 mm RMT 490 4457 160 mm RMT 637 5788 180 mm RMT 803 7289 200 mm RMT 946 858
Rate ( in Rs.)2010-2011
Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all local & central taxes , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains , etc. complete.
Sr No Item Description Unit
With E.D. Without ED
Rate ( in Rs.)2010-2011
10 225mm RMT 1215 110211 250 mm RMT 1497 135812 280 mm RMT 1878 170313 315 mm RMT 2374 215414 355mm RMT 3005 272615 400mm RMT 3947 358116 450mm RMT 5278 478817 500mm RMT 6510 590618 560mm RMT 8172 741319 630mm RMT 12381 1123220 710mm RMT 14137 12825
c 10 Kg/Sq. Cm
1 63 mm RMT 123 1112 75 mm RMT 173 1573 90 mm RMT 247 2244 110 mm RMT 364 3315 125mm RMT 469 4256 140 mm RMT 586 5317 160 mm RMT 761 6918 180 mm RMT 965 8769 200 mm RMT 1131 1026
10 225mm RMT 1448 131411 250 mm RMT 1808 164012 280 mm RMT 2233 202613 315 mm RMT 2868 260214 355mm RMT 3599 326515 400mm RMT 4794 434916 450mm RMT 6379 578717 500mm RMT 7884 715218 560mm RMT 9482 860219 630mm RMT 14986 1359620 710mm RMT 17151 15560
d 12.5 Kg/Sq. Cm
1 63 mm RMT 144 1312 75 mm RMT 203 1843 90 mm RMT 293 2664 110 mm RMT 432 3925 125mm RMT 557 5066 140 mm RMT 698 6347 160 mm RMT 909 8258 180 mm RMT 1150 1043
Sr No Item Description Unit
With E.D. Without ED
Rate ( in Rs.)2010-2011
9 200 mm RMT 1351 122610 225mm RMT 1744 158211 250 mm RMT 2145 194612 280 mm RMT 2690 244013 315 mm RMT 3405 308914 355mm RMT 4323 392215 400mm RMT 5682 515516 450mm RMT 7593 688917 500mm RMT 9359 849118 560mm RMT 11732 1064419 630mm RMT 16232 14725
e 16 Kg/Sq. Cm
1 63 mm RMT 174 1572 75 mm RMT 245 2223 90 mm RMT 351 3194 110 mm RMT 520 4715 125mm RMT 671 6096 140 mm RMT 837 7607 160 mm RMT 1098 9968 180 mm RMT 1382 12549 200 mm RMT 2386 2165
10 225mm RMT 3016 273611 250 mm RMT 3721 337612 280 mm RMT 4667 423413 315 mm RMT 5899 535214 355mm RMT 7484 678915 400 mm RMT 9694 879516 450mm RMT 12288 1114717 500mm RMT 15153 13747
2
i) 63mm Rmt 34ii) 75mm Rmt 36iii) 90mm Rmt 50iv) 110mm Rmt 53v) 125mm Rmt 60
Lowering laying and Jointing HDPE pipes by heating to the ends of pipes with the help of tefflon coated disc & hot flame blower to the required temparature and then pressing the ends together against each other , to form a monolithic & leakproof joint by thermosetting process. The pressing may be required to be done with jig fixtures etc. complete. with all material labour as directed by Engineer-in-charge ,including giving satisfactory hydraulic test.
Sr No Item Description Unit
With E.D. Without ED
Rate ( in Rs.)2010-2011
vi) 140mm Rmt 81vii) 160mm Rmt 86viii) 180mm Rmt 86ix) 200mm Rmt 96x) 225mm Rmt 124xi) 250mm Rmt 128xii) 280mm Rmt 158xiii) 315mm Rmt 174xiv) 355mm Rmt 190xv) 400mm Rmt 192xvi) 450mm Rmt 216xvii) 500mm Rmt 280xviii) 560mm Rmt 314xix) 630mm Rmt 353
Page 65
Section - I - ( XII ) - Pipe AppurtenancesSr No Item Description Unit
1
A
a Without by pass arrangement - PN -1
1 No 30632 No 35863 No 37764 No 52725 No 75286 No 91157 No 163838 No 279579 No 38309
10 No 6340611 No 8729012 No 10283213 No 16840714 No 24713015 No 433792
b With by pass arrangement - PN -1
1 No 43602 No 62113 No 84574 No 100445 No 187266 No 306087 No 410868 No 673639 No 90395
10 No 10576111 No 17167412 No 25044213 No 65668514 No 71880315 No 78092216 No 85191517 No 993901
c Without by pass arrangement - PN-1.6
1 No 29882 No 32283 No 52944 No 67815 No 94476 105737 No 224858 No 36098
Rate ( in Rs.)
2010-2011Providing and supplying ISI mark CI D/F reflux valves (non-return
valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I (1984)
CI D/F reflux valves (non-return valves ) With Third Party Inspection
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
Page 66
Sr No Item Description Unit Rate ( in Rs.)
2010-20119 No 50439
10 No 8687011 No 10039312 No 11845113 No 19243914 No 28276315 No 34167616 No 39223017 No 44627018 No 56481019 No 69729720 No 84372921 No 1004107
d With by pass arrangement - PN-1.6
1 No 30672 No 34513 No 50784 No 65675 91776 No 111397 No 224988 No 339959 No 47248
10 No 7936411 No 10395612 No 12162513 No 19742214 No 28800815 No 34801216 No 39950317 No 45454618 No 57528519 No 71022820 No 85937521 No 1022727
2
A Without byepass
a Sluice valves - PN -1
1 No 40662 No 46163 No 47374 No 63075 No 78906 No 94607 No 17901
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
Providing , and supplying double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally conforming in BS 5155, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding C. C. foundation/ structural steel support confirming to IS 13095-1991,
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
200 mm
Page 67
Sr No Item Description Unit Rate ( in Rs.)
2010-20118 No 27697
9 No 3490310 No 4951611 No 6676012 No 8165513 No 10507114 No 15519115 No 27817616 No 31722517 No 39559218 No 51005619 No 75387920 No 99864221 No 1185434
With by pass arrangement - PN-1.
i) 50 mm No 4066ii) 65 mm No 4616iii) 80 mm No 4737iv) 100 mm No 6307v) 125 mm No 7890vi) 150 mm No 11457vii) 200 mm No 20235viii) 250 mm No 30799ix) 300 mm No 37946x) 350 mm No 53784xi) 400 mm No 71526xii) 450 mm No 86366xiii) 500 mm No 111207xiv) 600 mm No 161294xv) 700 mm No 287608xvi) 750 mm No 325922xvii) 800 mm No 404922xviii) 900 mm No 519986xix) 1000 mm No 765384xx) 1100 mm No 1012667xxi) 1200 mm No 1197847
b , Sluice valves without byepass arrangement - PN -1.6
1 No 53732 No 58993 No 67274 No 89225 No 111336 No 110127 No 223168 No 346139 No 46018
10 No 6741811 No 9233312 No 114571
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
Page 68
Sr No Item Description Unit Rate ( in Rs.)
2010-201113 No 148283
14 No 22590915 No 48590016 No 53618317 No 62277718 No 75290519 No 109567120 No 119048421 No 1593546
d) Sluice valve - PN - 1.6with byepass arrangement
i) 50 mm No 5373ii) 65 mm No 5899iii) 80 mm No 6727iv) 100 mm No 8922v) 125 mm No 11133vi) 150 mm No 12976vii) 200 mm No 24773viii) 250 mm No 37934ix) 300 mm No 49351x) 350 mm No 72098xi) 400 mm No 97631xii) 450 mm No 119873xiii) 500 mm No 155187xiv) 600 mm No 232901xv) 700 mm No 498657xvi) 750 mm No 545666xvii) 800 mm No 631917xviii) 900 mm No 762470xix) 1000 mm No 1107007xx) 1100 mm No 1201494xxi) 1200 mm No 1605806
Butterfly Valve with byepass arrangement
b) - PN -1.0
1 80 mm No 53782 100 mm No 68743 125 mm No 78404 150 mm No 101335 200 mm No 135066 250 mm No 168807 300 mm No 267078 350 mm No 543199 400 mm No 58355
10 450 mm No 6741811 500 mm No 7402512 600 mm No 9141413 700 mm No 14794814 750 mm No 183643
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
1100 mm
1200 mm
Page 69
Sr No Item Description Unit Rate ( in Rs.)
2010-201115 800 mm No 202050
16 900 mm No 27905417 1000 mm No 33215118 1100 mm No 53866519 1200 mm No 50972120 1400 mm No 77719221 1500 mm No 965698
Butterfly Valve with byepass arrangement
d) Butterfly valve - PN - 1.6
1 80 mm No 59672 100 mm No 79053 125 mm No 86274 150 mm No 116535 200 mm No 155336 250 mm No 194127 300 mm No 307148 350 mm No 624679 400 mm No 67107
10 450 mm No 7753111 500 mm No 8512912 600 mm No 10512713 700 mm No 17014014 750 mm No 21118915 800 mm No 23135816 900 mm No 32091317 1000 mm No 41518918 1100 mm No 67333219 1200 mm No 63715320 1400 mm No 97149021 1500 mm No 1198961
3 Providing Manually Operated
With byepass arrangement
Butterfly Valves PN -1.0
i) 80 mm No
ii) 100 mm No
iii) 125 mm No
iv) 150 mm No
v) 200 mm No
vi) 250 mm No
vii) 300 mm No
viii) 350 mm No
ix) 400 mm No
x) 450 mm No
xi) 500 mm No
xii) 600 mm No
xiii) 700 mm No
xiv) 750 mm No
xv) 800 mm No
Page 70
Sr No Item Description Unit Rate ( in Rs.)
2010-2011xvi) 900 mm No
xvii) 1000 mm No
xviii) 1100 mm No
xix) 1200 mm No
xx) 1400 mm No
xxi) 1500 mm No
With byepass arrangement
Butterfly Valves PN -1.6
i) 80 mm No
ii) 100 mm No
iii) 125 mm No
iv) 150 mm No
v) 200 mm No
vi) 250 mm No
vii) 300 mm No
viii) 350 mm No
ix) 400 mm No
x) 450 mm No
xi) 500 mm No
xii) 600 mm No
xiii) 700 mm No
xiv) 750 mm No
xv) 800 mm No
xvi) 900 mm No
xvii) 1000 mm No
xviii) 1100 mm No
xix) 1200 mm No
xx) 1400 mm No
xxi) 1500 mm No
4 Lowering, laying, jointing CIDF Reflux, Sluice,
Butterfly valves
i) 50 mm No 626ii) 65 mm No 942iii) 80 mm No 1309iv) 100 mm No 1710v) 125 mm No 2129vi) 150 mm No 2688vii) 200 mm No 2796viii) 250 mm No 3644ix) 300 mm No 3780x) 350 mm No 4658xi) 400 mm No 5620xii) 450 mm No 6685xiii) 500 mm No 6924xiv) 600 mm No 7348xv) 700 mm No 7922xvi) 750 mm No 8725xvii) 800 mm No 10398
Page 71
Sr No Item Description Unit Rate ( in Rs.)
2010-2011xviii) 900 mm No 11033
xix) 1000 mm No 13006xx) 1100 mm No 15019xxi) 1200 mm to 1500 mm No 16503
5
12/15 MM No 569 20 mm No 686
3 No 9464 No 10335 No 11376 No 1249
b Air Valve Single Ball Flanged / Screwed Type - PN -1.6
1 No 6662 No 9463 No 11374 No 12265 No 13136 No 1714
5
A With Third Party Inspection
a a) Air Valve Double Ball Flanged Type - PN -1
1 No 52532 No 61293 No 7001
b a) Air Valve Double Ball Flanged Type - PN -1.6
1 No 69582 No 78793 No 9750
6
A With Third Party Inspection
a Air Valve Double Ball Flanged Type - PN -1
1 No 88532 No 16134
Providing and supplying Air valve as per IS 10845 and MJP Std Specification..... etc complete
25 mm
32 mm
40 mm
50 mm
12/15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transportatoin upto departmental stores / site, etc. complete.
50 mm
65 mm
80 mm
50 mm
65 mm
80 mm
Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with isolating sluice valve, mounted in horzontal position and operated by wheel gearing, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloading, transportation upto departmental store / site, etc. complete.
100 mm
150 mm
Page 72
Sr No Item Description Unit Rate ( in Rs.)
2010-20113 No 27133
b Air Valve Double Ball Flanged Type - PN -1.6
1 No 135342 No 190683 No 32068
7
A With Third Party Inspection
a a) Kinetic Air Valve Flanged Type - PN -1.
1 No 88112 No 108603 No 14170
b a) Kinetic Air Valve Flanged Type - PN -1.6.
1 No 104442 No 128733 No 16830
8 No
A With Third Party Inspection
a a) Kinetic Air Valve Flanged Type - PN -1.
1 No 190832 No 359303 No 52462
b a) Kinetic Air Valve Flanged Type - PN -1.6
1 No 226182 No 425863 No 62186
9
a Air Valve Single Ball (PN-1 and PN - 1.6)
1 No 100 2 No 127 3 No 163 4 No 181 5 No 193 6 No 210 7 No 221 8 No 232
200 mm
100 mm
150 mm
200 mm
Providing and supplying Kinetic Double Orifice type Air Valves as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloading, transportation upto departmental stores / site, etc. complete.
40 mm
50 mm
80 mm
40 mm
50 mm
80 mm
Providing and supplying Kinetic Double Orifice type Air Valves as per MJP’s standard specifications having small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring,with built-in Kinetic features, isolatintg sluice valve mounted in horizontal position and operated by wheel gearing, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transportation upto departmental stores / site, etc. complete.
100 mm
150 mm
200 mm
100 mm
150 mm
200 mm
Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
Page 73
Sr No Item Description Unit Rate ( in Rs.)
2010-20119 No 259
10 No 313 11 No 348 12 No 383 b Air Valve Double Ball (PN-1 and PN - 1.6)
1 No 109 2 No 136 3 No 163 4 No 186 5 No 216 6 No 250 7 No 288 8 No 344 9 No 364
10 No 401 11 No 548 12 No 604
100 mm
125 mm
150 mm
200 mm
15 mm
20 mm
25 mm
32 mm
40 mm
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
200 mm
Page 74
Sr No Item Description Unit Rate ( in Rs.)
2010-2011c Kinetic Air Valve (PN-1 and PN - 1.6)
1 No 248 2 No 287 3 No 313 4 No 344 5 No 379 6 No 414 7 No 593 8 No 647
10
A With Third Party Inspection
a
1 No 135702 No 180933 No 271404 No 423275 No 609136 No 779387 No 1039178 No 1734089 No 236596
10 No 27834811 No 317781
b b).Butterfly Valves
1 No 980032 No 1044773 No 1173494 No 1250135 No 1447126 No 162856
11
A With Third Party Inspection
a
1 No 146072 No 230633 No 351634 No 595305 No 551466 No 1003547 No 1692488 No 246905
40 mm
50 mm
65 mm
80 mm
100 mm
125 mm
150 mm
200 mm
Providing erecting Cast Steel/ Spheroidal Graphite (S.G) Iron D/F Sluice Valves / Butterfly Valves with jointing to pipe work (including all hardware and packing) water works quality, having non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, excluding C. C. foundation / structural steel support.
For Rating Class 150 (Working Pressure 20 kg/cm2 and Test Pressure 30 kg/cm2) a) Sluice Valves.
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
600 mm dia
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
600 mm dia
Providing erecting Cast Steel D/F Sluice Valves with jointing to pipe work (including all hardware and packing) water works qualityhaving non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, excluding C. C. foundation / structural steel support.
For Rating Class 300 (Working Pressure 52 kg/cm2 and Test Pressure 78 kg/cm2). Sluice Valves
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
350 mm dia
400 mm dia
Page 75
Sr No Item Description Unit Rate ( in Rs.)
2010-20119 No 297275
10 No 46312811 No 700005
450 mm dia
500 mm dia
600 mm dia
Page 76
Sr No Item Description Unit Rate ( in Rs.)
2010-2011b Butterfly Valves
1 No 1195642 No 1274623 No 1431664 No 1525165 No 1765496 No 198684
12
A With Third Party Inspection
1 No 94692 No 145013 No 245654 No 467065 No 813256 No 107142
13
A With Third Party Inspection
1 No 141082 No 198863 No 330714 No 585885 No 1060696 No 129146
14
A With Third Party Inspection
1 No 27357.002 No 38134.003 No 73074.004 No 94457.00
15
A With Third Party Inspection
1 No 273572 No 381343 No 730744 No 94457
300 mm dia
350 mm dia
400 mm dia
450 mm dia
500 mm dia
600 mm dia
Providing erecting Cast Steel /Spheroidal Graphite (S.G.) Iron D/F Reflux Valves Single Door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement, with gunmental seats excluding C. C. foundation / structural steel support.
For Rating Class 150 (Working Pressure 20 kg/cm2 and Test Pressure 30 kg/cm2).
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
Providing erecting Cast Steel D/F Reflux Valves Single door with jointing to pipe work (including all hardware and packing) water works quality with jointing to pipe without bypass arrangement, with gunmetal seat excluding C. C. foundation / structural steel support.
For Rating Class 300 (Working Pressure 52 kg/cm2 and Test Pressure 78 kg/cm2)
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250 mm dia
300 mm dia
Providing erecting Kinetic Double Orifice Cast Steel Air Valves with an isolating Sluice Valve mounted in horizontal position operated by wheel gear suitable for working pressure of Class-150 rating (20 kg/cm2).
80 mm dia
100 mm dia
150 mm dia
200 mm dia
Providing erecting Kinetic Double Orifice Cast Steel Air Valves with an isolating Sluice Valve mounted in horizontal position operated by wheel gear suitable for working pressure of Class 300 rating (52 kg/cm2)
80 mm dia
100 mm dia
150 mm dia
200 mm dia
Page 77
Sr No Item Description Unit Rate ( in Rs.)
2010-201116
a Foundation on Murun and Harder Strata.
1 No 46362 No 54313 No 110454 No 13870
b Foundation in B. C. Soil or Any Other Soil.
1 No 54922 No 66253 No 126164 No 15821
17
A With Third Party Inspection
a Pressure relief valves Type - PN -1.
1 No 39202 No 51083 No 66164 No 100345 No 140466 No 191527 No 218848 No 483289 No 67932
10 No 89590
b Pressure relief valves Type - PN -1.6.
1 No 49022 No 63823 No 82544 No 125405 No 175546 No 239347 No 273568 No 604069 No 84914
10 No 112246
Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.)
upto 150 mm dia
200 to 400 mm dia
450 to 900 mm dia
1000 to 1200 mm dia
upto 150 mm dia
200 to 400 mm dia
450 to 900 mm dia
1000 to 1200 mm dia
Providing and supplying C.I. D/F angle type spring loaded pressure relief valves of approved make and quality including all taxes (Central and local), octroi, inspection charges, transportatoin to departmental stores, etc. complete.
25 mm
40 mm
50 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
25 mm
40 mm
50 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
Page 78
Sr No Item Description Unit Rate ( in Rs.)
2010-201118
1 No 1872 No 2483 No 2874 No 3445 No 3776 No 4207 No 5938 No 6479 No 755
10 No 863Note : Only 85% rate is payable till satisfactiry hydraulic testing is given.
19 a
C.I. Pipes.
1 No 302 No 353 No 544 No 695 No 996 No 1177 No 1198 No 1529 No 176
10 No 21111 No 25712 No 30313 No 36214 No 39515 No 43516 No 474
19 b
A.C. Pipes.
1 No 102 No 123 No 194 No 205 No 296 No 407 No 498 No 559 No 60
10 No 6811 No 78
Lowering, laying and fixing in proper alignment and position all types of C.I. D/F angle type spring loaded pressure relief valves including all cost of all material, labour, cost of conveyance from stores to site of work and giving satisfactory hydraulic testing, etc. complete. (For all class of valves.).
25 mm
40 mm
50 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
Cutting and champhering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge (for all class of pipes).
80 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
Cutting and champhering of pipes of following diameters including cost of all materials and labour involved, etc. complete as directed by Engineer-in-charge (for all class of pipes).
80 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
Page 79
Sr No Item Description Unit Rate ( in Rs.)
2010-201120
a S.B.R. Gaskets for C. I. / DI Pipes.
1 No 352 No 363 No
4 No 515 No 856 No 1127 No 1578 No 1809 No 251
10 No 27411 No 37412 No 51713 No 92214 No 95815 No 99316 No 143517 No 1844
b Sealing ‘O’ Rings of SBR (for CID joints)
1 Set 422 Set 493 Set 594 Set 69
c Flat Flanged Gaskets moulded out of SBR (For Flanged Joints).
1 No 762 No 1013 No 1194 No 1645 No 2036 No 2847 No 3028 No 3649 No 451
10 No 49311 No 57712 No 776
21
C I Air valve PN 1.6 No
1 50 MM No 88082 80 MM No 122233 100 MM No 19654
Providing and supplying I.S.I. mark rubber gasket suitable for C.I. or D. I. pipe of all class for tyton joints including all taxes (Central and local) inspection charges, transportation to departmental stores / site, etc. complete.
80 mm
100 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
800 mm
900 mm
1000 mm
80 mm
100 mm
125 mm
150 mm
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
Providing and fixing and jointing high proformance C I Air valve for water combination type ( Kinetic Air Valve alongwith automatic air valve ) double ball , double orifice with stainless steel ball tampar proof air vent rolling sill machanism for air release and anyivaccum application design for 16 Kg/Sqcm working pressure and tested for 20 Kg /Sqcm pressure ( Rate include cost of gasket, belt, nut and any other material required for jointing and its transportation etc and including all taxes and duties and excluding octroi ).etc complete.
Page 80
Sr No Item Description Unit Rate ( in Rs.)
2010-20114 150 MM No 32896
5 200 MM 39847
Page 81
Section - I - ( XIII ) - Mechanical Joints/FittingsSr No Item Description Unit
1
1 No 12062 No 13143 No 16544 No 23665 No 30656 No 46237 No 51758 No 68269 No 891010 No 1045811 No 1314212 No 1685213 No 2298414 No 27930
2
1 No 7262 No 7793 No 10384 No 14005 No 15986 No 25627 No 32798 No 40419 No 628910 No 706111 No 965012 No 12037
Rate ( in Rs.)
2010-2011
Manufacturing,Suppling of C.I mechanical compression flanged/socket Tail Pieces (Popularly known as IT.M flange/socket tail piece) suitable for making flanged connection with the plain barrel of C.I. spun pipes (As per I.S. 1536/2001) & D.I. pipes (As per I.S. 8329/2000) The tail piece to be supplied complete with sealing rubber gasket of S.B.R.cast iron follower glands & mild steel nut-bolts.The whole assembly should be mechanically & hydraulically tested to the provision as laid down in I.S. 1538/1993. The rates are inclusive of cost of material,forwarding charges,saletax, loading, transportation & unloading at departmental store. etc complete as directed.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
Manufacturing,Suppling & delivery of C.I mechanical compression coller coupling (Popularly known as fifty T.M. coller coupling) ) suitable for C.I. spun pipes (As per I.S. 1536/2001) & D.I. pipes (As per I.S. 8329/2000) complete with sealing rubber gasket of S.B.R,cast iron follower glands & mild steel nut-bolts.The whole assembly should be mechanically & hydraulically tested to the provision as laid down in I.S. 1538/1993. The rates are inclusive of cost of material,forwarding charges,saletax, loading, transportation & unloading at departmental store. etc complete as directed.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
Page 82
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
13 No 1572614 No 18452
3
1 No 20662 No 23953 No 27984 No 43995 No 58386 No 86907 No 105768 No 175109 No 2386610 No 3046211 No 3790712 No 5357613 No 8456814 No 96049
4
1 No 19182 No 21353 No 26984 No 37065 No 48816 No 71607 No 86398 No 144119 No 1778210 No 2480411 No 2763412 No 3826313 No 5452614 No 72110
700 mm
750 mm
Supply of C. I. Mechanical Joint Double Socket 90° (1/4) Bends as dimensionally described in Table-14 of IS-13382/1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
Supply of CI Mechanical joint Double Socket Socket 45° (1/8) Bends as dimensionally described in Table -15 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R.(dimensionally described in IS-12820/1989) with cast iron follower gland mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
Page 83
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
5
1 No 18412 No 20493 No 24604 No 34795 No 43626 No 65967 No 79628 No 125709 No 1611510 No 2038611 No 2375712 No 3148013 No 4735414 No 52146
6
1 No 18232 No 20023 No 21744 No 34005 No 41876 No 61907 No 68588 No 108239 No 1466110 No 1850511 No 2017012 No 2765113 No 3727614 No 41585
Supply of C. I. Mechanical Joint Double Socket 22.5° (1/6) Bends as dimensionally described in Table -16 of IS-13382/1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
Supply of CI Mechanical joint Double Socket 11.25° (1/32) Bends as dimensionally described in Table -17 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. dimensionally described in (IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.
80 mm
100 mm
125 mm
150 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
600 mm
700 mm
750 mm
Page 84
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
7
1 No 27932 No 30033 No 33304 No 46645 No 47306 No 58667 No 56258 No 56879 No 677410 No 745411 No 792112 No 809613 No 966214 No 1020815 No 1145016 No 868617 No 888118 No 1139019 No 1176720 No 1245821 No 13749
8
1 No 27352 No 30013 No 31754 No 45305 No 46426 No 55287 No 53168 No 56709 No 653110 No 748811 No 750712 No 790013 No 937514 No 981015 No 10157
Supply of CI Mechanical joint All Socket Tees as dimenisonlly described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.
80x80x80 mm dia
100x100x80 mm dia
100x100x100 mm dia
150x150x80 mm dia
150x150x100 mm dia
150x150x150 mm dia
200x200x80 mm dia
200x200x100 mm dia
200x200x150 mm dia
200x200x200 mm dia
250x250x80 mm dia
250x250x100 mm dia
250x250x150 mm dia
250x250x200 mm dia
250x250x250 mm dia
300x300x80 mm dia
300x300x100 mm dia
300x300x150 mm dia
300x300x200 mm dia
300x300x250 mm dia
300x300x300 mm dia
Supply of CI Mechanical joint Double Stocket with Flanged Tees dimenisonlly described in Table -19 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.
80x80x80 mm dia
100x100x80 mm dia
100x100x100 mm dia
150x150x80 mm dia
150x150x100 mm dia
150x150x150 mm dia
200x200x80 mm dia
200x200x100 mm dia
200x200x150 mm dia
200x200x200 mm dia
250x250x80 mm dia
250x250x100 mm dia
250x250x150 mm dia
250x250x200 mm dia
250x250x250 mm dia
Page 85
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
16 No 881417 No 898618 No 1037519 No 1046320 No 1154621 No 1415122 No 1232823 No 1311024 No 1410625 No 1643726 No 1684027 No 1927028 No 1611529 No 1708230 No 1901931 No 1940332 No 2338233 No 2677334 No 1922035 No 2019036 No 2367937 No 2987938 No 3152739 No 3424440 No 2162541 No 2957042 No 3063543 No 3693744 No 4459445 No 3090446 No 4243647 No 4834748 No 5231949 No 6423850 No 4095851 No 4745052 No 5733553 No 6159854 No 4885155 No 5602456 No 107482
300x300x80 mm dia
300x300x100 mm dia
300x300x150 mm dia
300x300x200 mm dia
300x300x250 mm dia
300x300x300 mm dia
350x350x80 mm dia
350x350x100 mm dia
350x350x150 mm dia
350x350x200 mm dia
350x350x300 mm dia
350x350x350 mm dia
400x400x80 mm dia
400x400x100 mm dia
400x400x150 mm dia
400x400x200 mm dia
400x400x300 mm dia
400x400x400 mm dia
450x450x80 mm dia
450x450x100 mm dia
450x450x200 mm dia
450x450x300 mm dia
450x450x350 mm dia
450x450x450 mm dia
500x500x100 mm dia
500x500x250 mm dia
500x500x300 mm dia
500x500x400 mm dia
500x500x500 mm dia
600x600x100 mm dia
600x600x300 mm dia
600x600x400 mm dia
600x600x500 mm dia
600x600x600 mm dia
700x700x100 mm dia
700x700x200 mm dia
700x700x350 mm dia
700x700x400 mm dia
750x750x150 mm dia
750x750x250 mm dia
750x750x750 mm dia
Page 86
Sr No Item Description Unit Rate ( in Rs.)
2010-2011
9
1 No 19372 No 30483 No 32274 No 37145 No 40626 No 55507 No 54158 No 68269 No 683710 No 695411 No 982612 No 985713 No 974114 No 1484215 No 1314816 No 1323617 No 1643618 No 1642619 No 1622120 No 1975821 No 1945722 No 1896623 No 2869024 No 2792225 No 2621626 No 3938227 No 3574228 No 4245029 No 3923830 No 5840031 No 50133
Supply of CI Mechaincal joint Double Socket Reducers as described in Table -21 of IS - 13382/1992 complete with sealing rubber gasket of SBR dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.
100x80 mm dia
150x80 mm dia
150x100 mm dia
200x100 mm dia
200x150 mm dia
250x150 mm dia
250x200 mm dia
300x150 mm dia
300x200 mm dia
300x250 mm dia
350x200 mm dia
350x250 mm dia
350x300 mm dia
400x250 mm dia
400x300 mm dia
400x350 mm dia
450x400 mm dia
450x350 mm dia
450x400 mm dia
500x350 mm dia
500x400 mm dia
500x450 mm dia
600x400 mm dia
600x450 mm dia
600x500 mm dia
700x500 mm dia
700x600 mm dia
750x600 mm dia
750x700 mm dia
800x450 mm dia
800x700 mm dia
Page 87
Section - I - ( XIV ) - M.S.PipesSr No Item Description Unit
1
a Dia of Pipe : 219.10 mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
8 RMT
b Dia of Pipe : 273.10 mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
c Dia of Pipe : 323.90 mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
d Dia of Pipe : 355.70 mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
Rate ( in Rs.) 2010-2011
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes including procurements of plates, gas cutting to requried size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including all taxes (Central and local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores / site, unloading, stacking, etc, complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).
4.80 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.20 mm thick
8.70 mm thick
9.50 mm thick
4.80 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.40 mm thick
8.70 mm thick
9.50 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
Page 88
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
e Dia of Pipe : 406.00 mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
f Dia of Pipe : 457.00 mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
g Dia of Pipe : 508.00.mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
h Dia of Pipe : 559.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
I Dia of Pipe : 610.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
8 RMT
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
Page 89
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
j Dia of Pipe : 660.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
k Dia of Pipe : 711.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
8 RMT
l Dia of Pipe : 762.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
m Dia of Pipe : 813.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
8 RMT
n Dia of Pipe : 864.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
Page 90
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
o Dia of Pipe : 914.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
p Dia of Pipe : 965.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
q Dia of Pipe : 1016.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
8 RMT
r Dia of Pipe : 1067.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
s Dia of Pipe : 1118.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
Page 91
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
t Dia of Pipe : 1168.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
u Dia of Pipe : 1219.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
v Dia of Pipe : 1296.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
w Dia of Pipe : 1321.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
x Dia of Pipe : 1422.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
y Dia of Pipe : 1473.00. mm (O. D.)
1 RMT
2 RMT
z Dia of Pipe : 1524.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5.60 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
9.50 mm thick
9.98 mm thick
10.00 mm thick
6.40 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
9.50 mm thick
9.98 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
Page 92
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
5 RMT
6 RMT
7 RMT
10.00 mm thick
11.90 mm thick
12.00 mm thick
Page 93
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
aa Dia of Pipe : 1550.00. mm (O. D.)
1 RMT
2 RMT
ab Dia of Pipe : 1576.00. mm (O. D.)
1 RMT
2 RMT
ac Dia of Pipe : 1626.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
ad Dia of Pipe : 1650.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ae Dia of Pipe : 1700.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
af Dia of Pipe : 1750.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ag Dia of Pipe : 1800.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ah Dia of Pipe : 1850.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
10.00 mm thick
11.00 mm thick
9.50 mm thick
10.00 mm thick
7.10 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
Page 94
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
5 RMT 12.00 mm thick
Page 95
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
ai Dia of Pipe : 1900.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
aj Dia of Pipe : 1950.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ak Dia of Pipe : 2000.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
al Dia of Pipe : 2050.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
am Dia of Pipe : 2100.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
an Dia of Pipe : 2150.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ao Dia of Pipe : 2200.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
Page 96
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
ap Dia of Pipe : 2250.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
aq Dia of Pipe : 2300.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ar Dia of Pipe : 2350.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
as Dia of Pipe : 2400.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
at Dia of Pipe : 2450.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
au Dia of Pipe : 2500.00. mm (O. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
7.90 mm thick
8.70 mm thick
9.50 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
Page 97
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
2
a Dia of Pipe : 200.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
b Dia of Pipe : 250.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
c Dia of Pipe : 300.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
d Dia of Pipe : 350.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
e Dia of Pipe : 400.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including all taxes (Central and local), railway freight, insurance unloading from railway wagon, loading into truck, transport to stores / site, unloading, stacking, etc, complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
Page 98
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
5 RMT
6 RMT
9.00 mm thick
10.00 mm thick
Page 99
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
f Dia of Pipe : 450.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
g Dia of Pipe : 500.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
h Dia of Pipe : 550.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
I Dia of Pipe : 600.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
j Dia of Pipe : 650.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
k Dia of Pipe : 700.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
Page 100
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
5 RMT
6 RMT
7 RMT
l Dia of Pipe : 750.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
m Dia of Pipe : 800.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
n Dia of Pipe : 850.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
o Dia of Pipe : 900.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
p Dia of Pipe : 950.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
Page 101
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
7 RMT
q Dia of Pipe : 1000.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
r Dia of Pipe : 1050.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
s Dia of Pipe : 1100.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
t Dia of Pipe : 1150.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
u Dia of Pipe : 1200.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
7 RMT
v Dia of Pipe : 1250.00 mm (I. D.)
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
5.00 mm thick
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
Page 102
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
Page 103
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
w Dia of Pipe : 1300.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
6 RMT
x Dia of Pipe : 1350.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
y Dia of Pipe : 1400.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
z Dia of Pipe : 1450.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
aa Dia of Pipe : 1500.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ab Dia of Pipe : 1550.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ac Dia of Pipe : 1600.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
6.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
7.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
Page 104
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
5 RMT 12.00 mm thick
Page 105
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
ad Dia of Pipe : 1650.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
ae Dia of Pipe : 1700.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
af Dia of Pipe : 1750.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
ag Dia of Pipe : 1800.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
ah Dia of Pipe : 1850.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
ai Dia of Pipe : 1900.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
aj Dia of Pipe : 1950.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
ak Dia of Pipe : 2000.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
al Dia of Pipe : 2050.00 mm (I. D.)
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
Page 106
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
am Dia of Pipe : 2100.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
an Dia of Pipe : 2150.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ao Dia of Pipe : 2200.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ap Dia of Pipe : 2250.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
aq Dia of Pipe : 2300.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
ar Dia of Pipe : 2350.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
as Dia of Pipe : 2400.00 mm (I. D.)
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
Page 107
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
Page 108
Sr No Item Description Unit Rate ( in Rs.) 2010-2011
at Dia of Pipe : 2450.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
au Dia of Pipe : 2500.00 mm (I. D.)
1 RMT
2 RMT
3 RMT
4 RMT
5 RMT
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
8.00 mm thick
9.00 mm thick
10.00 mm thick
12.00 mm thick
16.00 mm thick
Page 109
Section - I - ( XIV ) - M.S.Pipes
1398.001625.001850.002018.002268.002350.002488.002706.00
1750.002036.002320.002602.002812.003126.003334.00
2422.002762.003057.003393.003602.003727.004059.00
2664.003037.003363.003733.004102.004468.00
Rate ( in Rs.) 2010-2011
Page 110
Rate ( in Rs.) 2010-2011
3047.003476.003849.004274.004697.005119.005382.00
3435.003919.004341.004822.005300.005778.006075.00
3824.004363.004833.005369.005903.006436.006768.00
4212.004806.005325.005917.006506.007094.007461.00
4600.005250.005817.006464.007109.007753.008154.009752.00
Page 111
Rate ( in Rs.) 2010-2011
4980.005685.006300.007001.007701.008398.008834.00
5368.006128.006792.007549.008304.009057.009527.00
11399.00
575765727284809689079715
10220
61457016777686449510
103741091313063
6533745982689191
101131103211606
Page 112
Rate ( in Rs.) 2010-2011
6913789487519728
107041167812286
7302.008338.009243.00
10276.0011307.0012336.0012979.00
7690.008781.009735.00
10823.0011910.0012995.0013672.0016374.00
8078.009225.00
10227.0011371.0012513.0013653.0014365.00
8466.009668.00
10719.0011918.0013116.0014312.0015058.00
Page 113
Rate ( in Rs.) 2010-2011
8846.0010103.0011202.0012455.0013707.0014957.0015737.00
10547.0011694.0013003.0014310.0015616.0016431.0019684.00
16610.0017442.0017477.00
11434.0012678.0014098.0015516.0016932.0017817.00
13652.0015182.0016710.0018236.0019189.0022995.00
18895.0019843.00
14637.0016277.0017916.0019553.00
Page 114
Rate ( in Rs.) 2010-2011
20576.0024454.0024658.00
Page 115
Rate ( in Rs.) 2010-2011
20929.0023007.00
20225.0021282.00
15621.0017372.0019122.0020870.0021962.0026322.00
17630.0019406.0021180.0022288.0026713.00
18167.0019997.0021826.0022967.0027528.00
18704.0020588.0022471.0023647.0028344.00
19240.0021179.0023117.0024327.0029159.00
19777.0021771.0023762.0025006.00
Page 116
Rate ( in Rs.) 2010-2011
29975.00
Page 117
Rate ( in Rs.) 2010-2011
20314.0022362.0024408.0025686.0030790.00
20851.0022953.0025053.0026365.0031605.00
21388.0023544.0025699.0027045.0032421.00
21925.0024135.0026344.0027724.0033236.00
22461.0024726.0026990.0028404.0034052.00
22998.0025318.0027635.0029083.0034867.00
23535.0025909.0028281.0029763.0035682.00
Page 118
Rate ( in Rs.) 2010-2011
24072.0026500.0028926.0030442.0036498.00
24609.0027091.0029572.0031122.0037313.00
25145.0027682.0030218.0031801.0038129.00
25682.0028274.0030863.0032481.0038944.00
26219.0028865.0031509.0033160.0039760.00
26756.0029456.0032154.0033840.0040575.0054013.00
Page 119
Rate ( in Rs.) 2010-2011
1393.001680.001969.002262.002556.002854.00
1733.002088.002445.002805.003168.003534.00
2073.002495.002921.003349.003780.004213.00
2412.002903.003396.003892.004391.004893.00
2752.003311.003872.004436.00
Page 120
Rate ( in Rs.) 2010-2011
5003.005572.00
Page 121
Rate ( in Rs.) 2010-2011
3092.003718.004348.004980.005614.006252.00
3432.004126.004823.005523.006226.006931.00
3771.004534.005299.006067.006838.007611.00
4111.004942.005775.006611.007449.008290.009981.00
4451.005349.006250.007154.008061.008970.00
10797.00
4791.005757.006726.007698.00
Page 122
Rate ( in Rs.) 2010-2011
8672.009649.00
11612.00
5131.006165.007202.008241.009284.00
10329.0012427.00
5470.006573.007677.008785.009895.00
11009.0013243.00
5810.006980.008153.009329.00
10507.0011688.0014058.00
6150.007388.008629.009872.00
11119.0012368.0014874.00
6490.007796.009104.00
10416.0011730.0013047.00
Page 123
Rate ( in Rs.) 2010-2011
15689.00
6829.008203.009580.00
10960.0012342.0013727.0016505.00
7169.008611.00
10056.0011503.0012953.0014406.0017320.00
7509.009019.00
10531.0012047.0013565.0015086.0018136.00
7849.009427.00
11007.0012591.0014177.0015765.0018951.00
8188.009834.00
11483.0013134.0014788.0016445.0019766.00
Page 124
Rate ( in Rs.) 2010-2011
10242.0011959.0013678.0015400.0017124.0020582.00
Page 125
Rate ( in Rs.) 2010-2011
10650.0012434.0014221.0016011.0017804.0021397.00
12910.0014765.0016623.0018483.0022213.00
13386.0015309.0017234.0019163.0023028.00
13861.0015852.0017846.0019843.0023844.00
14337.0016396.0018458.0020522.0024659.00
14813.0016940.0019069.0021202.0025475.00
15288.0017483.0019681.0021881.00
Page 126
Rate ( in Rs.) 2010-2011
26290.00
Page 127
Rate ( in Rs.) 2010-2011
18027.0020292.0022561.0027105.00
18570.0020904.0023240.0027921.00
19114.0021516.0023920.0028736.00
19658.0022127.0024599.0029552.00
20201.0022739.0025279.0030367.00
20745.0023350.0025958.0031183.00
21289.0023962.0026638.0031998.00
21832.0024573.0027317.0032814.0043838.00
Page 128
Rate ( in Rs.) 2010-2011
22376.0025185.0027997.0033629.0044926.00
22920.0025797.0028677.0034444.0046013.00
23463.0026408.0029356.0035260.0047100.00
24007.0027020.0030036.0036075.0048187.00
24550.0027631.0030715.0036891.0049275.00
25094.0028243.0031395.0037706.0050362.00
25638.0028855.0032074.0038522.0051449.00
Page 129
Rate ( in Rs.) 2010-2011
26181.0029466.0032754.0039337.0052537.00
Page 130
Rate ( in Rs.) 2010-2011
26725.0030078.0033433.0040153.0053624.00
27269.0030689.0034113.0040968.0054711.00
Page 131
Section - I - ( XV ) - Fabrication of M.S.Pipes and SpecialsSr No Item Description Unit
1
5 To 8 mm MT 7650.008 To12 mm MT 6000.0012 To 16 mm MT 4500.0016 To 20 mm MT 4050.0020 To 25 mm MT 3900.00
2
5 To 8 mm MT 10500.008 To12 mm MT 6900.0012 To 25 mm MT 4950.00
3
5 To 8 mm MT 12600.008 To12 mm MT 8400.0012 To 16 mm MT 6600.0016 To 25 mm MT 6150.00
4 MT 9750.00
Rate ( in Rs.)
2010-2011Fabricating pipes from steel plates supplied free of cost and stacking
the same in the fabricator’s yard. The rate to include cutting the plate, rolling, tack welding, assembling in suitable lengths to form pipes, welding on automatic welding machines and forming ‘V’ edge for both ends of pipe.
Fabricating one piece cants, short pipes (shorter than one strake length) from the steel plates supplied free of cost of and stacking the same in fabricator’s yard. The rate to include cutting the plates, rolling, tack welding either on automatic welding machine or manually and forming ‘V’ edge to both ends of pipes.
Fabricating composite bends from steel plates supplied free of cost and stacking the same in the fabricator’s yard. The rate to include cutting the plates, rolling, tacking drums, assembling the same to form bend of suitable length, welding either on automatic welding machine or manually and forming ‘V’ edge to both ends of bend but the rate excluding the circumferential butt welding required for assembling cants to form necessary composite bend.
Circumferential butt welding will be paid seperately under Item No. 7. (a) Howevere, the rate under this item will include the cost of longitudinal butt welding of pipes strakes.
Fabricating tapers from the steel plates, supplied free of cost and stacking the same in the fabricator’s yard. The rate to include cutting the plates, rolling, tack welding, welding either on automatic welding machine or manually and forming ‘V’ edge to both ends of tapers but the rate excludes circuferential butt welding required for assembling drums to form necessary tapers. Circumferential butt welding will be paid for under Item No. 7 (a). Howerver, the rate under this includes the longitudinal butt welding to form drums The rate shall also include the cost of fabrication of stifferner rings and gussets and mounting the same on tapers, tack and chain welding, etc. as directed by Engineer-in-charge.
Page 132
Sr No Item Description Unit Rate ( in Rs.)
2010-20115
MT 39000.00
MT8250.00
MT12750.00
MT 13650.00
MT 8850.00
MT 14400.00
MT 18750.00
I)for thickness of flange ring below 40 mm. Sq.m 825.00ii) for thickness of flange ring 40 mm. and above. Sq.m 1260.00
Sq.m 630.00
Sq.m 3000.00
Each 57.00
6
Expansion joints suitable for pipe diameters.
1 Each 18595
Fabricating specials and fixtures from steel materials supplied free of cost (welding will be paid separately except for category vi (a) and (b) below. The weight for payment under this item shall be caluculated on the basis of finished material neglecting the bolt holes wherever provided.)
i). Saddle pieces, loose stiffener rings, pressure type blank flanges, ladders, platforms, and any other minor fixtures. The rate to include cutting, bending, tack welding, etc. complete.
ii). ‘Y’ branches, ‘T’ branches. The rate to include cutting, bending, tack welding etc. complete.
iii). Dished closures such as domes. The rate to include cutting, cold pressing and tack welding etc. complete.
iv). Dished closures such as manhole cover. The rate to include cutting cold pressing and tack welding only. The rate also to include drilling holes including grinding wherever nesessary, with supply of bolts, nuts, washers, etc. complete as per drawing.
v). Flat manhole covers. The rate to include cutting, tack welding. The rate also to include drilling holes including grinding wherever necessary with supply of bolts, nuts, washers, etc.complete as per drawing.
vi , a). Flange rings below 40 mm. thick. The rate to include gas : cutting, tack welding to form ring, drilling holes including grinding wherever necessary etc. complete.
vi , b). Flange rings 40 mm.and above thick. The rate to include gas cutting to tack welding to form ring, drilling holes including grinding wherever necessary etc. complete.
vii , a). Machining of flange ringe for cut upto 2 mm. including handling, assembling, alignment the ring on machine, etc. complete as directed by Engineer-in-charge -
vii b). Extra over and above (vii) (a) for machining beyond 2 mm. for every additional cut of 2 mm. or part thereof.
i). Stress relieving of flange rings as specified and directed.
ii). Plug plates 150 mm. dia. and the thickness of plate from 14 mm to 25 mm as per drawing. The rate to include gas cutting, drilling holes, cost of G. I. plugs, rolling to raquired curvature and therading, etc. complete.
Providing, fabricating and fixing expansion joints for pipelines as per the drawing. The rate to include machining the strakes and steel ring as shown in the drawing and welding on either automatic welding machine or manually, Rate includes plates and flats required for expansion joint and all othr materials such as synthetic rubber, rubber ring, etc. complete. including packing as per specifications, grease, bolts and nuts, etc. including local handling, all types of taxes and duties etc. complete.
300mm. dia.
Page 133
Sr No Item Description Unit Rate ( in Rs.)
2010-20112 Each 26836
3 Each 349064 Each 468005 Each 549806 Each 684427 Each 754238 Each 877769 Each 101914
10 Each 12203011 Each 162070
7 MT
4950
8 MT 6750.00
9 MT 14693
10 Sq.m 65.00
11 Sq.m 65.00
12 Sq.m 78.00
400 mm. dia.
450 mm. dia.
500 mm. dia.
600 mm. dia.
700 mm. dia.
750 mm. dia.
800 mm. dia.
900 mm. dia.
1000 mm. dia.
1200 mm. dia.
Fabricating ring girder as per drawing and specifications from M.S. channels, flats, plates, etc. supplied free of cost and assembling the same on the ring girder strake and tack welding as per directions.
Fabricating ring girder supports (stools) as per drawing and specifications complete with top plates, base plates, side flats for fixing rollers wherever nescessary, grease box covers, rag bolts, grid road etc. from steel material supplied free of cost and stacking the same in fabricators yard.
Fabricating and assembling M.S. roller as per drawing. The rate to include machining, assembling and fixing the same to the side flats provided below the top plates of R.C. supports (stools) greasing including providing anti-thteft measures M.S. rounds will be supplied free of cost. All other materials such as bright stainless steel pins etc. shall be supplied by the fabricator at his cost.
Blast cleaning the surface of the old or new pipeline internally to remove all rust etc. complete, including providing sand, machinery, labour, cutting of pipes at required places and rewelding the same etc, complete as directed by Engineer-in-charge. (Pipes pieces if required for rewelding of old pipeline shall be paid separately.)
Cleaning of old or new pipeline internally with mechanical cleaning machine having steel scraper blades with required passes including removing all rust, scaling etc. including cutting of pipes at required places, rewelding the same incuding cost of all materials and labour, etc, complete (Pipes pieces if required for rewelding of old pipeline shall be paid separately.)
Cleaning of old pipeline internally by using swabbing method by passing polyurethane foam “Pig” with required hydraulic pressure, cutting of pipes at required places, rewelding the same including cost of all materials and labour, etc. complete. (Pipe pieces if required for rewelding of old pipeline shall be paid separately.)
Note : Water for this purpose shall be supplied by the department free of cost at fixed point within 5 Kms. Lead and all arrangements for filling section and creating hydraulic pressure on polyurethene pig shall be done by contractor at his own cost.
Page 134
Sr No Item Description Unit Rate ( in Rs.)
2010-201113 Sq.m 78.00
14 Sq.m 21.58
15 Sq.m 36.40
16
For pipe dia:
1 Each 18172 Each 35303 Each 52554 Each 91915 Each 125096 Each 15293
17Sqm 23.00
18Sqm 51.00
19Sqm 26.00
20Sqm 56.00
21Sqm 42.00
b) Second coat Sq.m 35.00
c)Third coat Sq.m 34.00
Blast cleaning the surface of the old or new pipeline externally to remove all rust including providing sand machinery. etc. complete as directed by Engineer-in-charge.
Providing and applying primer and one coat of red oxide of iron,paint, internally, to blast clened surface of the pipes.
Providing and applying primer and one coat of red oxide of iron, paint, internally, including cleaning the surface of the pipes with steel scrappers, wire brushes, and metal cleaning solution, etc.
Fabricating and fixing insulated flange rings assembly as per drawing from steel material, supplied free of cost. The rate to include fabrication of tail pipe (about 0.6 M long) fabrications of flange rings, machining, drilling holes, including grinding wherever necessary and welding, The rate above to include nuts, bolts, washers, etc. but shall not include supply and fixing of backbite/PVC rings, cylinders and rubber packing.
From 300mm.Upto 450mm. dia.
Above 450 mm. Upto 750 mm. dia.
Above 750 mm. Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Providing and applying primer & one coat of red oxide of iron paint internally at factory to blast cieaned surface of the pipes.
Providing & applying one coat of Zinc Rich Epoxy Primer, to the internal surface of pipes at factory as per specifications and directions.
Providing & applying first coat of intertol 49W thich to the internal surface of pipes at factory as per specifications and directions.
Providing & applying second coat of intertol 49W thich to the internal surface of pipes at factory as per specifications and directions.
Providing & applyin first coat of intertol 49W thich to the internal surface of pipes at factory as per specifications and directions.
Page 135
Section - I - ( XVI ) - M.S.Pipes LayingSr No Item Description Unit
1
a) 5 mm to 8 mm thick.
1 RMT 2332 RMT 2743 RMT 3154 RMT 3565 RMT 398b) Above 8 mm upto 12 mm thick.
1 RMT 4752 RMT 5293 RMT 5844 RMT 6405 RMT 6946 RMT 7497 RMT 805c) Above 12 mm upto 16 mm thick.
1 RMT 7142 RMT 7703 RMT 8234 RMT 8765 RMT 9306 RMT 983d) Above 16 mm upto 20 mm thick
1 RMT 10792 RMT 11393 RMT 11994 RMT 12585 RMT 13186 RMT 1378e) Above 20 mm upto 25 mm thick
1 RMT 14692 RMT 1554
Rate ( in Rs.) 2010-2011Lowering laying in position to correct line and level including M. S.
pipes with / without any outcoating on pedastals or chairs upon prepared formation.The rate to include loading, unloading hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. completed as specified.
Upto 250 mm. dia.
Above 250 mm. Upto 500 mm. dia.
Above 500 mm. Upto 750 mm. dia.
Above 750 mm. Upto 1000 mm. dia
Above 1000 mm. Upto 1250 mm. dia.
From 750 mm. Upto 1000 mm. dia.
Above 1000 mm. Upto l250 mm. dia
Above 1250 mm. Upto 1500 mm. Dia
Above 1500 mm Upto 1750 mm. dia
Above 1750 mm. Upto 2000 mm dia
Above 2000 mm. upto 2250 mm dia
Above 2250 mm. upto 2500 mm dia
From 2000 mm Upto 2250 mm dia
Above 2250 rnm. Uplo 2500 mm dia.
Above 2500 mm Upto 2750 mm dia
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. upto 3250 mm dia.
Above 3250 mm. Upto 3500 mm
From 2500 mm Upto 2750 mm dia
Above 2750 mm Upto 3000 mm dia
Above 3000 mm upto 3250 mm dia
Above 3250 mm Upto 3500 mm did
Above 3500 mm Upto 3750 mm dia
Above 3750 mm upto 4000 mm dia
Above 3500 mm Upto 3750 mm dia
Above 3750 mm upto 4000 mm dia
Page 136
Sr No Item Description Unit Rate ( in Rs.) 2010-20112
a) 5 mm to 8 mm thick.
1 RMT 3252 RMT 3823 RMT 4414 RMT 4985 RMT 556b) Above 8 mm upto 12 mm thick.
1 RMT 6642 RMT 7413 RMT 8184 RMT 8945 RMT 9726 RMT 10497 RMT 1126c) Above 12 mm upto 16 mm thick
1 RMT 10352 RMT 10783 RMT 11524 RMT 12265 RMT 13016 RMT 1375d) Above 16 mm upto 20 mm thick.
1 RMT 14852 RMT 15513 RMT 16784 RMT 17625 RMT 18456 RMT 1928e) Above 20 mm upto 25 mm thick.
1 RMT 20572 RMT 2175
3
a) 5 mm to 8 mm thick.
Lowering laying in position to correct line and level including M. S. specials with / without any outcoating such as distance pieces, straps, bends, tapers, etc. on pedastals or chairs upon perpared formation in trenches upon prepared formation.The rate to include loading, unloading hoisting, marginal cutting wherever required, assembling and tack welding, and transportation upto 500 M. etc. complete.
Upto 250 mm. dia.
Above 250 mm. Upto 500 mm. dia.
Above 500 mm. Upto 750 mm. dia.
Above 750 mm. Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
From 750 mm.Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
From 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
From 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
From 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Lowering laying in position to correct line and level including M. S. pipes with / without any outcoating, on pedestals or chairs upon piers, trestles etc. The rate to include loading, unloading hoisting, marginal cutting wherever required, assembling and tack welding, transportaion upto 500 M. etc. complete.
Page 137
Sr No Item Description Unit Rate ( in Rs.) 2010-20111 RMT 278
2 RMT 3283 RMT 3774 RMT 4285 RMT 477b) Above 8 mm upto 12 mm thick.
1 RMT 5692 RMT 6343 RMT 7014 RMT 7675 RMT 8336 RMT 9007 RMT 965c) Above 12 mm upto 16 mm thick.
1 RMT 8222 RMT 8613 RMT 9874 RMT 10525 RMT 11156 RMT 1170d) Above 16 mm upto 20 mm thick.
1 RMT 12952 RMT 13663 RMT 14384 RMT 15095 RMT 15816 RMT 1654e) Above 20 mm upto 25 mm thick.
1 RMT 17632 RMT 1864
4
a) 5 mm to 8 mm thick.
1 RMT 3902 RMT 4593 RMT 5284 RMT 5985 RMT 667
Upto 250 mm. dia.
Above 250 mm. Upto 500 mm. dia.
Above 500 mm. Upto 750 mm. dia.
bove 750 mm. Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
From 750 mm.Upto 1 000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
From 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
from 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Lowering and laying in position to correct line and level including M. S. specials such as distance pieces, straps, bends, tapers, etc. on pedestals or chairs up on piers or trestles. The rate to include loading, unloading hoisting, marginal cutting wherever required, assembling and tack welding, and including transportation upto 500 M. etc. complete as specified.
Upto 250 mm. dia.
Above 250 mm. Upto 500 mm. dia.
Above 500 mm. Upto 750 mm. dia.
Above 750 mm. Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
Page 138
Sr No Item Description Unit Rate ( in Rs.) 2010-2011b) Above 8 mm upto 12 mm thick.
1 RMT 7972 RMT 8893 RMT 9824 RMT 10745 RMT 11676 RMT 12607 RMT 1351c) Above 12 mm upto 16 mm thick.
1 RMT 12422 RMT 12923 RMT 13824 RMT 14725 RMT 15616 RMT 1651d) Above 16 mm upto 20 mm thick.
1 RMT 18142 RMT 19123 RMT 20144 RMT 21135 RMT 22146 RMT 2315e) Above 20 mm upto 25 mm thick.
1 RMT 24692 RMT 2609
5
a) 5 mm to 8 mm thick.
1 RMT 2392 RMT 2813 RMT 3224 RMT 3655 RMT 407b) Above 8 mm upto 12 mm thick.
1 RMT 4862 RMT 5423 RMT 5984 RMT 6555 RMT 711
From 750 mm.Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
From 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3 000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
From 2500 mm. Upto 2750 mm. dia.
Above 275Omm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
From 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Transporting within 500 meters,laying in position to correct line and level M. S. pipes with / without any outcoating, on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding the same. The rate to include loading, unloading, hoisting, ect. complete as specified.
Upto 250 mm. dia.
Above 250 mm. Upto 500 mm. dia.
Above 500 mm. Upto 750 mm. dia.
Above 750 mm. Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
From 750 mm.Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Page 139
Sr No Item Description Unit Rate ( in Rs.) 2010-20116 RMT 767
7 RMT 823c) Above 12 mm upto 16 mm thick
1 RMT 7572 RMT 7893 RMT 8444 RMT 8985 RMT 9536 RMT 1008d) Above 16 mm upto 20 mm thick.
1 RMT 11022 RMT 11643 RMT 12264 RMT 12875 RMT 13496 RMT 1412
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
From 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
From 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 3500 mrn. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Page 140
Sr No Item Description Unit Rate ( in Rs.) 2010-2011e) Above 20 mm upto 25 mm thick.
1 RMT 15022 RMT 1589
6
a) 5 mm to 8 mm thick.
1 RMT 3352 RMT 3933 RMT 4524 RMT 5115 RMT 571b) Above 8 mm upto 12 mm thick.
1 RMT 6812 RMT 7593 RMT 8374 RMT 9175 RMT 10656 RMT 11127 RMT 1152c) Above 12 mm upto 16 mm thick.
1 RMT 10602 RMT 11053 RMT 11804 RMT 12575 RMT 13356 RMT 1412d) Above 16 mm upto 20 mm thick.
1 RMT 15332 RMT 16303 RMT 17174 RMT 18035 RMT 18896 RMT 1976e) Above 20 mm upto 25 mm thick.
1 RMT 21022 RMT 2224
From 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Transporting within 500 meters,laying in position to correct line and level M. S. specials pipes with / without any outcoating, such as distance pieces, straps, bends, tapers, etc. on prepared bedding in trenches including marginal cutting wherever required, assembling tack welding, the same. The rate to including loading, unloading, hoisting, ect. complete as specified.
Upto 250 mm. dia.
Above 250 mm. Upto 500 mm. dia.
Above 500 mm. Upto 750 mm. dia.
Above 750 mm. Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
From 750 mm.Upto 1000 mm. dia.
Above 1000 mm. Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
From 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
From 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
From 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Page 141
Sr No Item Description Unit Rate ( in Rs.) 2010-20117
a) Butt Joints : Plate thickness:
1 RMT 1082 RMT 1643 RMT 3854 RMT 4295 RMT 5386 RMT 6597 RMT 7068 RMT 8419 RMT 101810 RMT 110211 RMT 132212 RMT 165913 RMT 2252b) Lap joints with convex fillet welds Lag Lengths:
1 RMT 1512 RMT 1943 RMT 2564 RMT 2865 RMT 4296 RMT 5827 RMT 6418 RMT 7779 RMT 87810 RMT 117311 RMT 1424
8
1 RMT 2942 RMT 3593 RMT 4244 RMT 4895 RMT 5546 RMT 6197 RMT 6848 RMT 7509 RMT 81510 RMT 880
Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.
4 mm.
5 mm.
6 mm.
7 mm.
8 mm.
10mm.
12mm.
14mm.
16mm.
18mm.
20 mm.
22 mm.
25 mm.
5 mm.
6 mm.
8 mm.
10mm.
12mm.
14mm.
16mm.
18mm.
20 mm.
22 mm.
25 mm.
Shifiting and aligning ring girders including removing tack welds and re-tacking in the correct position etc. complete as per specification for the pipes of following diameter.
From 1000 mm, Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Page 142
Sr No Item Description Unit Rate ( in Rs.) 2010-201111 RMT 945
12 RMT 1015
9
1 Each 10742 Each 11613 Each 12494 Each 13365 Each 14246 Each 15127 Each 15998 Each 16869 Each 177510 Each 186211 Each 196612 Each 2036
10
1 Each 36322 Each 37673 Each 39044 Each 40395 Each 76356 Each 78057 Each 79768 Each 80949 Each 831610 Each 848811 Each 865712 Each 8828
11
a) MT
6503
Above 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Transporting within 500 meters and fixing in position stools, base plates, roller sets, grease box covers, etc. including welding wherever necessary. The rate also to include fixing stools, base plates, etc. in true line and level, connecting the base plate to anchor bolts by flush welding including cutting the bolts, if required, assembleng and aligning C. I. or M. S. roller sets of any size including oiling, greasing, etc. The rate also to include grouting anchor bolts, welding of two halves of grease box covers as directed by Engineer-in-charge, for pipes of following dia.
From 1000 mm, Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Transporting within 500 meters and aligning, fixing in position and tack welding expansion joints suitable for pipeline of diameters.
From 1000 mm, Upto 1250 mm. dia.
Above 1250 mm. Upto 1500 mm. dia.
Above 1500 mm. Upto 1750 mm. dia.
Above 1750 mm. Upto 2000 mm. dia.
Above 2000 mm. Upto 2250 mm. dia.
Above 2250 mm. Upto 2500 mm. dia.
Above 2500 mm. Upto 2750 mm. dia.
Above 2750 mm. Upto 3000 mm. dia.
Above 3000 mm. Upto 3250 mm. dia.
Above 3250 mm. Upto 3500 mm. dia.
Above 3500 mm. Upto 3750 mm. dia.
Above 3750 mm. Upto 4000 mm. dia.
Transporting within 500 meters aligning and fixing in position and tack welding only, including marginal cutting, supplying and providing rubber packing etc. where necessary.
Minor fixtures such as manhole cover, pressure and non-pressure type blank flanges, loose rings, small pipes to form saddle bypass arrangement, plug plates, ladders, platform, stiffener rings, etc.
Page 143
Sr No Item Description Unit Rate ( in Rs.) 2010-2011b) MT
3303 Minor fixtures such as tees, domes, ‘Y’ branches, insulating flange ring assembly, etc
Page 144
Sr No Item Description Unit Rate ( in Rs.) 2010-201112 Gas cutting (either square cut or V cut) pipes, plates, etc. of thickness
1 RMT 492 RMT 693 RMT 904 RMT 1035 RMT 1426 RMT 190
13 Gas cutting holes upto 50 mm dia (for plugs)
Thickness of shell
1 No 532 No 74
14 Sq.m 985
15 No 2211
16 No 10819
17
1 Km 307842 Km 308303 Km 309004 Km 310065 Km 311136 Km 313227 Km 316308 Km 32148
upto 5 mm.
above 5 mm. Upto 10 mm.
Above 10 mm. Upto 14 mm.
Above 14 mm. Upto 18 mm.
Above 18 mm. Upto 22 mm.
Above 22 mm.
5 mm. to 12 mm
Above 12 mm
Providing M.S. bar mesh prepared out of 16 mm dia M.S. bar at 15 cm. c/c both ways, welded to flanged ring including tack welding of bars and fixing the same with nuts and bolts on open faces of outlet / inlet pipes in the sump or reservoir, etc. complete as directed by Engineer-in-charge.
Providing permanent test points on the pipe line as per drawing and as directed by Engineer-in-charge including providing and fixing sluice valves, road boxes for sluice valves of size 80 mm to 250 mm in one brick masonry chamber 300 mm x 300 mm clear C. M. 1:5 with 12 mm thick 1:3 cement plaster both inside and outside on M-100 C.C. , 150 mm thick etc. complete as specified and directed.
Supplying transporting, the S.P. fire hydrants including duck foot bend, S.V. and S.V. road box, painting the hydrant,fixing the saddle piece, supplying, and laying required lenght of C.I. pipeline and jointing the same spun yarn, molten lead including caulking, fixing the S.V. road box in one brick masonry chamber in 1:5 C.M. with 12 mm thick 1:3 cement plaster both inside and outside on 1:3:6: C.C.150 mm thick etc, complete specified and directed. [As per I.S.900/1965 Revised]
Hydraulic testing of M.S. pipeline to specified pressure including cost of all materials and labour and water for testing for the lenght upto 1km., using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary.
Upto 600mm.dia.(I.D.)
Above 600 mm. upto 750 mm. dia. (l.D.)
Above 750 mm. upto 900 mm. dia. (l.D.)
Above 900 mm. upto 1050 mm. dia. (l.D.)
Above 1050 mm. upto 1200 mm. dia. (l.D.)
Above 1200 mm. upto 1500 mm. dia. (l.D.)
Above 1500 mm. upto 1800 mm. dia. (l.D.)
Above 1800 mm. upto 2250 mm. dia. (l.D.)
Page 145
Sr No Item Description Unit Rate ( in Rs.) 2010-20119 Km 32523
10 Km 32900
Extra over initial KM
1 Km 1562 Km 2223 Km 3324 Km 4395 Km 5666 Km 8357 Km 12628 Km 19379 Km 241310 Km 291711 Km 3444
18 Sq.m 343
19 Sq.m 370
20 Sq.m 300
Above 2250 mm. upto 2500 mm. dia. (l.D.),
Above 2500 mm. dia. (l.D.)
Upto 600mm.dia.(I.D.)
Above 600 mm. upto 750 mm. dia. (l.D.)
Above 750 mm. upto 900 mm. dia. (l.D.)
Above 900 mm. upto 1050 mm. dia. (l.D.)
Above 1050 mm. upto 1200 mm. dia. (l.D.)
Above 1200 mm. upto 1500 mm. dia. (l.D.)
Above 1500 mm. upto 1800 mm. dia. (l.D.)
Above 1800 mm. upto 2250 mm. dia. (l.D.)
Above 2250 mm. upto 2500 mm. dia. (l.D.),
Above 2500 mm. upto 2750 mm. dia. (l.D.),
Above 2750 mm. dia. (l.D.)
Providing and applying with mechanical arrangement 1:3 proportion cement sand gunite, 40 to 50 mm thick to M. S. pipe surface under 2.1 kg. per sqcm. to 2.80 kg. per sqcm. pressure including removing the loose materials as directed by Engineer-in-charge and including scrapping the surface with wire brushes, degreasing, cleaning by compressed air and providing fixing BRC fabric no.14 as reinforcement, curing for 21 days, disposing off the rebound materials within a lead of 50 M, etc. complete as directed by Engineer-in-charge.
Providing and applying pipe coating of fibres, coaltar and solvent based rubber modified bituminous primer of density 0.92 gms/cu cm and viscosity of 1000-2000 cps @ 150 gms/sqm followed by seven layers(4mm thick) of polythene polymerised bitumen and polyester of local 7 layers) pipe cost 4 mm should conform to requirement of IS-10221 and AWWA C-203 for pre-fabricated tapes including covering cost on pipe coating. Rates shall include cost of material coating and wrapping over the pipes, handling charges, perparation of pipe surface, all labour, material, etc. complete.] Note : Pipe coating is to be done at laying worksite only.
Providing and applying with mechanical arrangement cement sand gunite of 50 mm thickness to floors, walls, floor slabs or any other structure under 2.1 kg. per sqcm. to 2.80 kg. per sqcm. pressure including removing the loose materials on surface, cleaning with comperssed air, degreasing, etc. including scaffolding and curing for 21 days, providing and fixing BRC fabric no. 14 but excluding cost of reinforcement, if any and removing rebound materials within a lead of 50 M, etc. complete as directed by Engineer-in-charge (for GSRs and buildings.)
Page 146
Sr No Item Description Unit Rate ( in Rs.) 2010-201121 Sq.m 394
22
1 Sq.m 2692 Sq.m 312
23 Sq.m 961
24 Sq.m 562
25
Providing and applying with mechanical arrangement cement sand gunite of 50 mm thickness to floors, walls, roof slabs or any other structure under 2.1 kg. per sqcm. to 2.80 kg. per sqcm. pressure including removing the loose materials on surface, cleaning with compressed air, degreasing, etc. including scaffolding and curing for 21 days, providing and fixing BRC fabric no. 14 but excluding cost of reinforcement, if any and removing rebound materials within a lead of 50 M, for staging and bottom of bottom slab, etc. complete as directed by Engineer-in-charge (for RCC ESRs)
Providing and making inner cement mortar lining to M.S. pipes with mechanical devices in cement mortar 1:1 proportion, including cost of all materials, labour, special sand required, machinery, power generation, all equipments and taking necessary access openings and manholes, cuts at suitable intervals as directed by Engineer-in-charge and rewelding the same after done with doubler plates pipes including necessary excavation, refilling concerte breaking and remaking if any, breaking guniting and remaking the same, repainting wherever required with epoxy paint in 3 coats, all dewatering including emptying the pipline and refilling the same after done with (water to be supplied by department free of cost within 5 km. lead at fixed point and all other arrangements to be done by agency), including carrying out “C” value performance test of pipeline, complete job as per the directions of the Engineer-in-charge.
9 mm thick for pipes upto 700 mm dia.
12 mm thick for pipes upto 700 mm dia.
Providing and applying of elastomeric (450% elongation), thermoplastic, fire retardant, coating skin tensile strength 18 to 21 kg/cm2, antifungal antibacterial anticorrosive, graft co-polymer Coating on smooth plastered surface. 100 Micron dyu film thickness of Self bonding with plastered surface and 100 Micron of top coat. For sewage treatment plant ( R.C.C.Tank inside coating) and water treatment plant.
Providing and applying external and internal coating for steel structures in sewage treatement plant/water treatement plant with elastomeric (450% elongation), thermoplastic, fire retardant, coating skin tensile strength 18 to 21 kg/cm2, antifungal antibacterial, anticorrosive, graft co-polymer. 50 Micron DFT. of self bonding grade with steel, 50 Micron DFT. of inner coat and 50 Micron DFT of top coat.
Providing and applying of elastomeric (450% elongation), thermoplastic, fire retardant, coating skin tencile strength 18 to 21 kg/cm2, antifungal, antibacterial anticorrosive, graft co-polymer Coating on external pipe lines in un laid/laid condition after proper cleaning. 50 Micron DFT of self bonding grade with metal surface, 50 Micron DFT inner coat and 50 Micron DFT of top coat.
Page 147
Sr No Item Description Unit Rate ( in Rs.) 2010-20111 Water and sewage pipe lines (external) in unlaid condition. Sq.m 588
2 Water and sewage pipe lines (external) in laid condition. Sq.m 60326
1 Pipe line in unlaid condition Sq.m 7402 Pipe line in laid condition Sq.m 790
27
1 6 mm dia MT 269072 8 mm dia MT 205893 10 mm dia MT 163154 12 mm dia MT 135755 16 mm dia MT 101656 20 mm dia MT 82737 25 mm dia MT 65348 32 mm dia MT 52359 40 mm dia MT 3975
28
H.D.P.E. coating Thickness in micron
1 2000 sq.m 13712 3000 sq.m 17213 4000 sq.m 19784 5000 sq.m 2274
Providing and applying of elastomeric (450% elongation), thermoplastic, fire retardant, coating skin tensile strength 18 to 21 kg/cm2, antifungal, antibacterial anticorrosive, graft co-polymer Coating on internal surface of pipe lines. 100 Micron DFT of site bonding grade with steel surface and 100 Micron DFT of top coat.
Providing and applying of elastomeric (450% elongation), thermoplastic, fire retardant, coating skin tensile strength 18 to 21 kg/cm2, antifungal, antibacterial anticorrosive, graft co-polymer Coating on cleaned steel reinforcement bars. 80 to 100 Micron DFT with self bonding trade of bar coating.
Providing and applying HDPEcoating for MS pipe internally as well as externally including cost of HDPE powder moulding pipes grade , labour , scrapping the pipe surface with wire brushes, degrading , cleaning by compressed air and surface grinding and finishing including cost of loading , unloading and handelling pipes at factory etc. complete as directed by Engineer - in -Charge ( Factory at Virar Mumbai.).