dss series scrap steel shredders - cloud object … · model / 規格 dss/600 dss/1000 working...
TRANSCRIPT
www.diyo.com.tw
DIYORecycling
DSS SERIES Scrap steel shredders
廢鋼磚預碎機
Pre-shredder is applicable to breaking and
disposing of car shells as well as all types of
metal bricks like alumimum and iron bricks.It can
restore and pre-shred different type of pressed
and packaged metal bricks to process following
productivity. For instance melting can shorten the
disolving time and reduce garbbage, sand, stone,
etc, hence to improve productivity and quality,
become more environmental-friendly and profit-
able virtually.
DPS 600
DSS Introduction
1
廢鋼磚預碎設備可用於汽車外殼及鐵磚的撕碎分解，可用於汽車外殼粉碎前處理，提升後段設備的產能。另外可將各類型金屬磚如鋁、鐵等...經預碎設備壓還原分解後進行後段處理，如:熔解，會縮短熔解的時間以及熔解前的垃圾，如:砂、土等..，實質提升產能及品質，以及減少環境汙染。
Website
Youtube
Address Contact
No.28-1, Wayao Rd.Dali Dist., Taichung City 41259Taiwan (R.O.C.)
台中市大里區瓦磘路28之1號
TEL: 04-24064957 FAX: 04-24065272
Email: [email protected]
www.diyo.com.tw
DIYO recycling / 大佑機械廠 / Taiwan DIYO / Scrap steel shredder
DSS SERIES Scrap steel shredders
功能介紹
Website
Youtube
Address Contact
No.28-1, Wayao Rd.Dali Dist., Taichung City 41259Taiwan (R.O.C.)
台中市大里區瓦磘路28之1號
TEL: 04-24064957 FAX: 04-24065272
Email: [email protected]
www.diyo.com.tw
DIYO recycling / 大佑機械廠 / Taiwan DIYO / Scrap steel shredder
DSS SERIES Scrap steel shredders
THE SPECIAL SPECIFICATION ACCEPTS ORDERINGS, PLEASE CONTACT US.特殊規格可接受訂製，歡迎洽詢
已加工材料
2
Processed materials
Model / 規格 DSS/600 DSS/1000Working width / 工作寬度 2000 mm 2000 mmShaft rotors / 轉軸 2 n. 2 n.Shaft rotor diamter at gear wheel / 齒輪轉軸直徑 500 mm 800 mm
Working length of shaft rotors / 轉軸的工作長度 2200 mm 800 mm
Width (overall) / 寬度(整體) 3000 mm 4000 mm
Length (overall) / 長度(整體) 8500 mm 10500 mm
Height, excluding base (overall) and feedhopper / 整體高度(不包括基座、進料斗) 3000 mm 3500 mm
Engine control flipper switch / 發動機控制踏板開關 50 hp 50 hp
Production / 產量 20~30 t/h. 30~80 t/h.
Albero veloce / High speed shaft
Hydraulic engines / 液壓發動機 2 n. 2 n.
Installed power / 安裝電源 300 x 2 hp 500 x 2 hp
Gear wheel shaft rotor speed / 齒輪軸轉子轉速 7 n. 3 n.
Maximum gear wheel diameter / 最大齒輪直徑 1100 mm 1500 mm
Number of teeth per gear wheel (inclined profile) / 每個齒輪的齒數 (傾斜的輪廓) 9 n. 11 n.
Maximum working pressure / 最大工作壓力 350 bar 350 bar
Machinable Items 加工項目
www.diyo.com.tw
DIYORecycling
DSS SERIES