dtl broadcast ltd
DESCRIPTION
MINIBLOX - BROADCAST SOLUTIONS IN A BOXTRANSCRIPT
Phone: +44 (0) 20 8813 5200 Fax: +44 (0) 20 8813 5022
Email: [email protected]
Web: www.dtl-broadcast.com
Johnson's Estate
Hayes, Middlesex
UB3 3BA, UK.
D T L B r o a d c a s t L t d
MINIBLOX FRAMES & ACCESSORIES
4010 1RU rack mounting frame for up to 5 MiniBlox™ units. Frame includes a central power supply
4020 2RU rack mounting frame for up to 14 MiniBlox™ units. Frame includes a central power supply. Note: When mounting 4461A, 4463A units, a maximum of 10 units is strongly advised.
4006 Desktop power supply for MINIBLOX
4021 MiniBlox Power supply for 4020 2U racking frame (Optional )
FeaturesFeaturesFeaturesFeatures
• Compact, rugged high quality units
• Expanding range of conversion & distribution units
• SDI, HD-SDI and analogue video
• Audio embedders & de-embedders
D T L B r o a d c a s t L t d
MiniBlox ™
Solutions in a box
• Automatic 3G, HD, or SD SDI or DVB-ASI at 270Mb/s standard detection
• Automatic input cable equalisation
• 6 re-clocked outputs (when DVB-ASI 3 are inverted)
• LED shows power and valid input signal presence
• Supports all data rates up to 360Mb/s
• 4 re-clocked outputs
• SMPTE 259M compatible
• Automatic input cable equalisation up to 300m at 270Mb/s
4401 SDI re-clocking DA
This distribution amplifier is suitable for all SDI data rates up to 360Mb/s. It has
automatic input cable equalisation and provides 4 re-clocked outputs.
www.dtl-broadcast.com Page 2
4206 1x6 3G-HD-SDI multi-rate re-clocking distribution amplifier
Digital video distribution amplifier that operates with all SDI standards from 270Mbit to
3GHz. It has automatic input cable equalization and provides 6 reclocked outputs.
• Differential looping input and 3 outputs
• Inherently good CMRR
• Signal presence LED
• Gain & equalisation adjustment
• Equalisation up to 450m of cable
• Control reset button
4500 Analogue VDA
The 4500 is a broadcast quality analogue video distribution amplifier. It has a looped
input and 4 outputs. There are controls to adjust the gain and equalisation, as well as
a button to reset the gain and equalisation to standard for minimum cable length.
DTL Broadcast Ltd Page 15
4262A 3G-HD-SD dual stereo analogue audio de-embedder
Extracts two balanced stereo analogue audio pairs from any group in the ancillary data
space of an SDI signal and provides broadcast quality analogue audio outputs.
• Automatic 3G, HD, or SD SDI standard detection
• Extracts two balanced analogue audio stereo pairs from any group
• High quality 24 bit audio DAC
• Adjustable full scale output levels to meet all international standards
• LEDs show group status and input signal presence
• Automatic input cable equalisation
• 2 re-clocked SDI outputs
• Locking connector for power supply
• Automatic 3G, HD, or SD SDI standard detection
• Extracts four balanced AES audio streams from any two groups
• LEDs show group status and input signal presence
• Automatic input cable equalisation
• 2 re-clocked SDI outputs
4262D 3G-HD-SD quad AES audio de-embedder
Extracts four balanced AES digital audio streams from any two groups within an SDI
signal
5CA15SD-X00 optional breakout cable for above
www.dtl-broadcast.com Page 14
• Automatic 3G, HD, or SD SDI standard detection
• Inserts four balanced AES audio streams into any two groups
• Internal sample rate converters for 48kHz AES synchronous with video input
• LEDs show group status and input signal presence
• Automatic input cable equalisation
• 2 re-clocked SDI outputs
• Compact and rugged design
• Optional XLR breakout cable (BNC to XLR adaptor available for unbalanced AES inputs)
4261A 3G-HD-SD dual Stereo analogue audio embedder Inserts two balanced stereo analogue audio pairs into any group in the ancillary data
space of an SDI signal.
5CA15SD-X05 optional breakout cable for above
• Automatic 3G, HD, or SD SDI standard detection
• Inserts two balanced analogue audio stereo pairs into any group
• Replaces or adds to existing audio
• High quality 24 bit audio ADC
• Adjustable full scale input levels to meet all
4261D 3G-HD– quad AES audio de-embedder Inserts two balanced stereo analogue audio pairs into any group in the ancillary data
space of an SDI signal.
• Multi-standard output
• 270Mb/s 525/625 operation
• 8-bit DAC
• VBI control
• Built in colour bar generator
4411 SDI to component analogue DAC
This is a monitoring quality 270Mb/s SDI to component analogue DAC. Switches select
YUV or RGB outputs, 525 or 625, output of colour bars and control vertical blanking
information.
4412 SDI to universal analogue DAC
This is a monitoring quality 270Mb/s SDI to composite/component analogue DAC.
Switches select YUV and composite (CVBS), RGB & CVBS, RGB-S, or YC & 2 CVBS, 525 or
625, output of colour bars and control vertical blanking information.
• Multi-standard output
• 270Mb/s 525/625 operation
• 8-bit DAC
• VBI control
• Built in colour bar generator
DTL Broadcast Ltd Page 3
4410 SDI to composite analogue DAC
This is a monitoring quality 270Mb/s SDI to composite analogue DAC. The analogue
output is configurable to different types of PAL and NTSC via switches on the end of the
unit. These also control output of colour bars and VBI blanking.
• Multi-standard output
• 270Mb/s 525/625 operation
• 8-bit DAC
• VBI control
• Built in colour bar generator
www.dtl-broadcast.com Page 4
• Component & RGB output
• SMPTE/EBU, Beta or MII levels
• 270Mb/s 525/625 operation
• 4x over-sampling 10-bit DAC
• VBI control
• Built in test pattern & blackburst output
• Composite, component, RGB & YC output
• SMPTE/EBU, Beta or MII levels
• 270Mb/s 525/625 operation
• 4x over-sampling 10-bit DAC
• VBI control - built in test pattern & blackburst output
4422 SDI to universal analogue 10-bit DAC
This is a full featured broadcast quality 270Mb/s SDI to universal analogue encoder. The
analogue output is selectable to YUV & composite (CVBS), RGB & CVBS, RGBS, or YC and
2 CVBS via switches on the end of the unit. These switches also control the output of a
built in test pattern, vertical blanking information and blackburst output.
4421 SDI to component analogue 10-bit DAC
This is a fully featured broadcast quality 270Mb/s SDI to component analogue converter.
YUV or RGB output is set by switches on the end of the unit. These also control 525/625
lines, output of colour bars, blackburst and VBI blanking. .
• Multi-standard output
• SMPTE/EBU, Beta or MII levels
• 270Mb/s 525/625 operation
• 4x over-sampling 10-bit DAC
• VBI control
• Built in test pattern & blackburst output
4420 SDI to composite analogue 10-bit DAC
This is a full featured broadcast quality 270Mb/s SDI to composite analogue DAC. The
analogue output is configurable to different types of PAL and NTSC via switches on the
end of the unit. These also control output of colour bars, blackburst and VBI blanking. .
DTL Broadcast Ltd Page 13
4600U Unbalanced AES-EBU Audio DA
1x4 unbalanced (75 ohm) with equalization >600m
• Unbalanced AES3-id 75Ω input
• Four unbalanced AES3-id 75Ω outputs
• Automatically equalises over 610m of cable
• Supports data rates from 32 to 192kHz
4610 AES-EBU to analogue stereo audio DAC
Offers 24 bit ADC, gain controls, balanced or unbalanced I/O. The unit will operate on all
input rates from 22 to 192kHz. Cable equalization is also included
• Balanced AES3 input on 9 way D-type socket or unbalanced AES-3id input on BNC
• Balanced and unbalanced analogue outputs on 9 way D-type socket
• 24-bit DAC resolution
• Output level continuously adjustable to cover all commonly used levels
• Balanced analogue stereo audio input
• Balanced AES3 110Ω and unbalanced AES3-id 75Ω outputs
• 24-bit ADC
• Locks to any AES reference from 32-96KHz or free runs at 48KHz
• Input gain controls to cover all commonly used
4640 Analogue stereo audio to AES-EBU ADC
Offers 24 bit ADC, free running at 48kHz, locks to any AES reference from 22 to 96kHz.
I/O can be balanced or unbalanced
www.dtl-broadcast.com Page 12
• Extracts two AES-EBU streams from any group
• Digital silence output if embedded audio is absent
• 20 or 24 bit de-embedding
• LEDs show group status and input signal presence
• Automatic input cable equalisation up to 100m
• Re-clocked SDI output
4462DB SDI balanced AES-EBU audio de-embedder
This extracts two digital stereo audio streams from any group in the ancillary data space
of a 270Mb/s SDI stream. There is automatic input cable equalisation and a re-clocked
SDI output.
4462DU SDI unbalanced AES-EBU audio de-embedder
As 4462DB above, but this extracts two unbalanced digital stereo audio streams from
any group in the ancillary data space of a 270Mb/s SDI signal.
• Extracts 2 unbalanced AES-EBU stereo pairs
• Otherwise as 4462DB above
4600B Balanced AES-EBU audio DA
1x4 balanced (110 Ohm) on 9 pin ‘D’ connectors with an extra, unbalanced output on a
BNC connector. Also includes cable equalization >250m.
• Balanced AES3 110Ω input
• Four balanced AES3 110Ω outputs
• One unbalanced AES3-id 75Ω output
• Automatically equalises over 250m of audio cable
• Supports data rates from 32 to 192kHz
• Transformer coupling on input and outputs for good common mode and isolation performance
DTL Broadcast Ltd Page 5
4424 SDI to composite analogue 10-bit DAC
270Mb/s 525/625 SDI input with broadcast quality multi-standard NTSC/PAL composite
analogue output, plus reclocked SDI output and automatic 525/625 line detection
• SDI to composite analogue DAC • Automatic 270Mb/s 525/625 detection • 4x over-sampling • 10-bit DAC • VBI control • Automatic input cable equalisation to over 350m • Re-clocked SDI output • Built in colour bar & blackburst generator (requires an SDI Input)
• SDI to component analogue DAC • Component or RGB outputs • SMPTE/EBU or Beta component levels • Automatic 270Mb/s 525/625 detection • 4x over-sampling • 10-bit DAC • VBI control • Automatic input cable equalisation to over 350m • Re-clocked SDI output • Built in colour bar generator
4425 SDI to composite analogue 10-bit DAC
270Mb/s 525/625 SDI input with broadcast quality RGB/Bata/MII/YUV analogue output,
plus re-clocked SDI output and automatic 525/625 line detection
4426 SDI to universal analogue 10-bit DAC
270Mb/s 525/625 SDI input with broadcast quality multi-standard NTSC/PAL composite,
YUV, Beta, MII, RGB(S) component or YC analogue output, plus reclocked SDI output and
automatic 525/625 line detection.
• SDI to universal analogue DAC • Composite, component, RGB or YC outputs • SMPTE/EBU or Beta component levels • Automatic 270Mb/s 525/625 detection • 4x over-sampling • 10-bit DAC • VBI control • Automatic input cable equalisation to over 350m • Re-clocked SDI output • Built in colour bar generator (requires an SDI input)
www.dtl-broadcast.com Page 6
• Analogue composite to SDI ADC
• Dual high speed oversampling 11-bit ADC’s
• Digital TBC and jitter filter for greater output stability
• Temporal frame recursive noise reduction
• Motion adaptive 3D YC separation using a 5 line comb filter
• Component analogue to SDI ADC
• Two 270Mb/s 525/625 outputs
• Dual high-speed over sampling 10-bit A/D converters
• Automatically selects between 525 and 625 lines
• VBI control
• Automatic gain control
4431 omponent analogue to SDI ADC YUV analogue input with 270Mb/s 525/625 SDI output.
4430+ Composite analogue to SDI ADC
Composite analogue input with 270Mb/s 525/625 SDI output. Includes jitter filter, dual
11-bit oversampling, 5 line comb filter and recursive noise reduction.
• Composite analogue to SDI ADC
• Auto select multi-standard input – PAL, NTSC & SECAM
• Two 270Mb/s 525/625 outputs
• Dual high-speed over sampling 10-bit A/D converters
• 4 line adaptive comb filter
4430 Composite analogue to SDI ADC
Multi-standard NTSC/PAL composite analogue input with 270Mb/s 525/625 SDI
output.
DTL Broadcast Ltd Page 11
• Inserts 2 balanced AES-EBU stereo pairs
• Inserts audio into any group
• Replaces or adds to existing audio
• Digital silence inserted if no audio feed is present
• Selectable 20 or 24 bit embedding
• LEDs show group status & input signal presence
• Automatic input cable equalisation up to 100m
4461DB SDI balanced AES-EBU audio embedder
This embeds two balanced stereo AES-EBU signals into the ancillary data space of a
270Mb/s SDI signal. Conforms to SMPTE 272M and allows audio to be inserted into any
of the four groups. Existing audio groups can be added to or completely removed. Digital
silence is inserted when an audio feed is absent. There is automatic input cable
equalisation and a re-clocked SDI output.
• Inserts 2 unbalanced AES-EBU stereo pairs
• Otherwise as 4461DB for above
4461DU SDI unbalanced AES-EBU audio embedder AS 4461DB above, but this embeds two unbalanced stereo AES-EBU signals into the
ancillary data space of a 270Mb/s SDI signal.
www.dtl-broadcast.com Page 10
• Inserts two asynchronous unbalanced AES-EBU stereo pairs into any group
• Supports all audio sample rates from 32kHz to 96kHz
• Inserts digital silence when audio signals are not present
• Replaces or adds to existing audio
• Automatic detection of 525/625 SDI
• Selectable 20 or 24 bit embedding
• LEDs show group status and input signal presence
• Automatic input cable equalisation to over 350m
• EDH generation
• Re-clocked SDI output
4461DU+ SDI unbalanced AES-EBU audio embedder with SRC
Inserts two asynchronous unbalanced AES/EBU stereo pairs into any group. Includes
sample rate converters and automatic equalization.
DTL Broadcast Ltd Page 7
• Universal analogue to SDI ADC
• Composite, YC or component YUV input
• Two SDI 270Mb/s 525/625 outputs
• Dual high-speed over sampling 10-bit A/D converters
• 4 line adaptive comb filter
4432 Universal analogue to SDI ADC
This extracts two digital stereo audio streams from any group in the ancillary data space
of a 270Mb/s SDI stream. There is automatic input cable equalisation and a re-clocked
SDI output.
4432+ Universal analogue to SDI ADC
Composite analogue YUV or YC input with 270Mb/s 525/625 SDI output. Includes jitter
filter, dual 11-bit oversampling, 5 line comb filter and recursive noise reduction.
• Universal analogue to SDI ADC
• Dual high speed oversampling 11-bit ADC’s
• Digital TBC and jitter filter for greater output stability
• Temporal frame recursive noise reduction
• Motion adaptive 3D YC separation using a 5 line comb filter
• Extracts two balanced analogue audio stereo pairs from any group
• High quality 24 bit audio DAC
• Automatic detection of 525/625 SDI
• 20 or 24 bit de-embedding
• Adjustable full scale output levels to meet all international standards
• LEDs show group status and input signal presence
• Automatic input cable equalisation to over 350m
• 10-bit video DAC with 4x over-sampling
4464A SDI to analogue composite video & audio DAC
Includes an analogue audio de-embedder. The unit accepts an SDI signal and outputs
NTSC/PAL composite video and balanced stereo analogue audio. Note: This unit gets a little warm. When mounting in a 4020 2RU frame, mount no more than two units
together and leave a blank space on either side
www.dtl-broadcast.com Page 8
• Converts analogue composite video to SDI and inserts two balanced analogue audio stereo pairs into any group
• Auto select multi-standard input of PAL, NTSC & SECAM
• Two 11 bit 4x oversampled video ADCs with 5 line adaptive comb filtering
• Automatic video gain control range from -3dB to 6dB
• Jitter filter and digital TBC for unstable input signals
4463A Composite video & analogue audio to SDI with audio ADC
Includes an analogue audio embedder. The unit accepts two stereo pairs and embeds
them into the SDI data-stream. Note: This unit gets a little warm. When mounting in a 4020 2RU frame, mount no more than two units together
and leave a blank space on either side.
• Inserts two stereo pairs into any group
• High quality 24 bit audio ADC
• Replaces or adds to existing audio
• Digital silence inserted if audio feed is absent
• Selectable 20 or 24 bit embedding
• LEDs show group status & input signal presence
• Automatic input cable equalisation up to 100m
4461A SDI analogue audio embedder
This embeds two balanced stereo audio pairs into the ancillary data space of a
270Mb/s SDI stream. Conforms to SMPTE 272M and allows audio to be inserted into
any of the four groups. Existing audio groups can be added to or completely removed.
Digital silence is inserted when an audio feed is absent. There is automatic input cable
equalisation and a re-clocked SDI output.
DTL Broadcast Ltd Page 9
• Inserts 2 balanced AES-EBU stereo pairs
• Inserts audio into any group
• Replaces or adds to existing audio
• Digital silence inserted if no audio feed is present
• Selectable 20 or 24 bit embedding
• LEDs show group status & input signal presence
4461DB SDI balanced AES-EBU audio embedder
This embeds two balanced stereo AES-EBU signals into the ancillary data space of a
270Mb/s SDI signal. Conforms to SMPTE 272M and allows audio to be inserted into any
of the four groups. Existing audio groups can be added to or completely removed. Digital
silence is inserted when an audio feed is absent. There is automatic input cable
equalisation and a re-clocked SDI output.
• Inserts 2 unbalanced AES-EBU stereo pairs
• Otherwise as 4461DB above
4461DU SDI unbalanced AES-EBU audio embedder AS 4461DB above, but this embeds two unbalanced stereo AES-EBU signals into the
ancillary data space of a 270Mb/s SDI signal.
• Inserts two asynchronous balanced AES-EBU stereo pairs into any group
• Supports all audio sample rates from 32kHz to 96kHz
• Inserts digital silence when audio signals are not present
• Replaces or adds to existing audio
• Automatic detection of 525/625 SDI
• Selectable 20 or 24 bit embedding
• LEDs show group status and input signal presence
• Automatic input cable equalisation to over 350m
• EDH generation
• Re-clocked SDI output
4461DB+ SDI balanced AES-EBU audio embedder with SRC
Inserts two asynchronous balanced AES/EBU stereo pairs into any group. Includes
sample rate converters and automatic equalization.