dts511sha/03 technische daten type specifications … kg (595 lbs) 7721 kg (17022 lbs) 7661 kg...
TRANSCRIPT
270 kg (595 lbs)
7721 kg (17022 lbs)
7661 kg (16889 lbs)
13.5 m (44’ 3")
6952 kg (15326 lbs)
6589 kg (14526 lbs)
9.3 m (30’ 6")
7.4 m (24’ 3")
60 kg (132 lbs)
8793 kg (19385 lbs)
8635 kg (19037 lbs)
8391 kg (18499 lbs)
8072 kg (17795 lbs)
7377 kg (16263 lbs)
8703 kg (19187 lbs)
8515 kg (18772 lbs)
8291 kg (18278 lbs)
7992 kg (17619 lbs)
7317 kg (16131 lbs)
25.0 m (82’ 0")
22.5 m (73’ 10")
20.2 m (66’ 3")
18.0 m (59’ 1")
15.7 m (51’ 6")
11.3 m (37’ 1")
170 kg (375 lbs)
90 – 110 l/min (23.8 – 29.1 US gal./min)
36.5 MPa (365 bar) (5293 psi)
endlosendless
sans finite
25.0 m
34.6 m
(82’ 0")
(113’ 6")
22.5 m (73’ 10")
25000 kg (55110 lbs)
784.8 kNm (80.0 mt) (578630 ft.lbs)
76.0 kNm (7.7 mt) (56030 ft.lbs)
+V1
+2/4
9(H)7(F) 8(G)6(E)
STZY
5(D)4(C)3(B)2(A)
+V1
DTS511SHA/03
0100
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Alle Gewichtsangaben ohne Aufbauzubehör,Zusatzgeräte und Öl.
Kransockel - EGG Zusatztank
Hydr. Ausschübe:
Max. Reichweite mit 2. Knicksystem:
Mehrgewicht:
Max. Reichweite:
Fördermenge der Pumpe:
Max. Betriebsdruck:
Schwenkmoment:
Schwenkbereich:
Max. Reichweite:
Max. hydraulische Reichweite:
Max. Hubkraft:
Max. Hubmoment:
Gewicht +V ohne 2/4
Krangewicht (R3X,STZS):
Technische Daten
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
All weights given without assembly accessory,additional devices and oil.
Base - EGG External tank
Hydr. boom extensions:
Max. outreach + Fly-Jib:
Excess weight:
Max. outreach:
Pump capacity:
Operating pressure:
Slewing torque:
Slewing angle:
Max. outreach:
Max. hydraulic outreach:
Max. lifting capacity:
Lifting moment:
Weight +V without 2/4
Crane weight (R3X,STZS):
Specifications
Subject to change, production tolerances have to be taken into account.
Tous les poids sans huile ni accessoire de montage ni appareils accessoires
Socle - EGG Réservoir d'huile supplementair
Extensions hydrauliques:
Portee maximale + Fly-Jib:
Excessif poids:
Max. portee:
Debit de pompe:
Pression d' utilisation:
Couple de rotation:
Angle de rotation:
Max. portee:
Portee hydraulique maximale:
Capacite maxi de levage:
Couple de levage:
Poids +V sans 2/4
Poids grue (R3X,STZS):
Données Techniques
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
10MULTI
(0.39")
217
(8.5
4")
1870 mm (73.62")
1750 mm (68.90")
1750 mm (68.90")
1750 mm (68.90")
1740 mm (68.50")
1740 mm (68.50")
1740 mm (68.50")
1600 mm (62.99")
1600 mm (62.99")
973
(38.
31")
478 (18.82") 282 (11.10") 2247 (88.46")
476 (18.74")
26(1
.02"
)
2/4X
632
(24.
88")
19 (0.75")
R751 (29.57")
340(13.39")
2550 (100.39") 1275 (50.20") 523 (20.58")
1840
(72.
44")
392
(15.
44")
2450
(96.
46")
2435
(95.
87")
50(1
.97"
)
173
(6.7
9")
2/4X
9(H)
6(E) – 7(F)
8(G)
4(C) – 5(D)
2(A) – 3(B)
DTS511SHA/03
0200
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
hydraulische Ausschübe
Fahrzeugmitte
Transportstellung - LKW
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
hydraulic extensions
Middle of vehicle
Transport position - LKW
Subject to change, production tolerances have to be taken into account.
extensions hydrauliques
Milieu de véhicule
Position de transport - LKW
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
233
(9.1
6")
16 (0.63") 135 (5.31")
942
(37.
09")
737 (29.01") 2470 (97.24")
2431
(95.
72")
2247 (88.46") 1123 (44.23")
2345 mm (92.32")
2225 mm (87.60")
2225 mm (87.60")
2225 mm (87.60")
2200 mm (86.61")
2200 mm (86.61")
2200 mm (86.61")
2090 mm (82.28")
2000 mm (78.74")
2/4X
1275 (50.20") 838 (32.99")
2550 (100.39")
340 (13.39")
1780
(70.
08")
2388
(94.
02")
1958
(77.
07")
2375
(93.
51")
940 (37.01")
1367 (53.82")
1673 (65.89") 840 (33.09")
PK 85002 V1H STZS
2/4X
9(H)
6(E) – 7(F)
8(G)
4(C) – 5(D)
2(A) – 3(B)
DTS511SHA/03
0300
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Schwerpunkt ohne Öltank
hydraulische Ausschübe
Fahrzeugmitte
Transportstellung - EGG
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Center of gravity without oil tank
hydraulic extensions
Middle of vehicle
Transport position - EGG
Subject to change, production tolerances have to be taken into account.
Centre de gravite sans réservoir
extensions hydrauliques
Milieu de véhicule
Position de transport - EGG
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
1755
(69.
09")
632
(24.
88")
55 kg (121 lbs)
9681 kg (21343 lbs)
9653 kg (21281 lbs)
9441 kg (20813 lbs)
575490
3.5t2.5t
(22.63")(19.29")
1269 (49.96")
LKW
270
0 E
GG
264
0 (1
06.3
0")
(103
.94"
)
2664
2594
3.5t
2.5t
(104
.88"
)(1
02.1
3")
2550 (100.39")
KBW006–AA SHES
KBW007–AA SHES
KBW010–AA SH24.5kN (2.5t)
34.3KN (3.5t)
PK 85002 F PJ 125 C,EJV1
PK 85002F R3X STZS
PK 85002 F PJ125 C
+2/4 PJ 125
PK 85002 F PJ 125 EJV1
PK 85002 F PJ 125 E
DTS511SHA/03
0400
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Fahrzeugmitte
Seilwindengewicht siehe Technische Informationsblätter 08 - Seilwindenaufbau
GewichtModell
Transportstellung - PJ125C,E
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Middle of vehicle
Cable weight see technical informations 08 - Cable winch assembly
WeightModel
Transport position - PJ125C,E
Subject to change, production tolerances have to be taken into account.
Milieu de véhicule
Poids treuile a cable voire le feuille information techniques 08 - Montage du treuil a cable
PoidsModèle
Position de transport - PJ125C,E
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
9915 kg (21858 lbs)
9887 kg (21797 lbs)
9675 kg (21329 lbs)
1870
(73.
62")
632
(24.
88")
55 kg (121 lbs)
575490
3.5t2.5t
(22.63")(19.29")
1269 (49.96")
LKW
270
0 E
GG
264
0 (1
06.3
0")
(103
.94"
)
2664
2594
3.5t
2.5t
(104
.88"
)(1
02.1
3")
2550 (100.39")
KBW006–AA SHES
KBW007–AA SHES
KBW010–AA SH24.5kN (2.5t)
34.3KN (3.5t)
PK 85002 G PJ 125 C,EJV1
PK 85002 G R3X STZS
PK 85002 G PJ125 C
+2/4 PJ 125
PK 85002 G PJ 125 EJV1
PK 85002 G PJ 125 E
DTS511SHA/03
0500
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Fahrzeugmitte
Seilwindengewicht siehe Technische Informationsblätter 08 - Seilwindenaufbau
GewichtModell
Transportstellung - PJ125C,E
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Middle of vehicle
Cable weight see technical informations 08 - Cable winch assembly
WeightModel
Transport position - PJ125C,E
Subject to change, production tolerances have to be taken into account.
Milieu de véhicule
Poids treuile a cable voire le feuille information techniques 08 - Montage du treuil a cable
PoidsModèle
Position de transport - PJ125C,E
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
1755
(69.
09")
632
(24.
88")
LKW
270
0 E
GG
264
0 (1
06.3
0")
(103
.94"
)
55 kg (121 lbs)
9623 kg (21215 lbs)
9582 kg (21124 lbs)
9347 kg (20606 lbs)
575490
3.5t2.5t
(22.63")(19.29")
1269 (49.96")
2664
2594
3.5t
2.5t
(104
.88"
)(1
02.1
3")
2550 (100.39")
KBW006–AA SHES
KBW007–AA SHES
KBW010–AA SH24.5kN (2.5t)
34.3KN (3.5t)
PK 85002 E PJ 170 C,EJV1
PK 85002E R3X STZS
PK 85002 E PJ 170 C
+2/4 PJ 170
PK 85002 E PJ 170 EJV1
PK 85002 E PJ 170 E
DTS511SHA/03
0600
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Fahrzeugmitte
Seilwindengewicht siehe Technische Informationsblätter 08 - Seilwindenaufbau
GewichtModell
Transportstellung - PJ170C,E
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Middle of vehicle
Cable weight see technical informations 08 - Cable winch assembly
WeightModel
Transport position - PJ170C,E
Subject to change, production tolerances have to be taken into account.
Milieu de véhicule
Poids treuile a cable voire le feuille information techniques 08 - Montage du treuil a cable
PoidsModèle
Position de transport - PJ170C,E
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
1755
(69.
09")
632
(24.
88")
1273 (50.14")
LKW
276
0 E
GG
270
0 (1
08.6
6")
(106
.30"
)
2550 (100.39")
55 kg (121 lbs)
9924 kg (21878 lbs)
9883 kg (21788 lbs)
9648 kg (21270 lbs)
575490
3.5t2.5t
(22.63")(19.29")
2664
2594
3.5t
2.5t
(104
.88"
)(1
02.1
3")
KBW006–AA SHES
KBW007–AA SHES
KBW010–AA SH24.5kN (2.5t)
34.3KN (3.5t)
PK 85002 F PJ 170 C,EJV1
PK 85002F R3X STZS
PK 85002 F PJ 170 C
+2/4 PJ 170
PK 85002 F PJ 170 EJV1
PK 85002 F PJ 170 E
DTS511SHA/03
0700
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Fahrzeugmitte
Seilwindengewicht siehe Technische Informationsblätter 08 - Seilwindenaufbau
GewichtModell
Transportstellung - PJ170C,E
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Middle of vehicle
Cable weight see technical informations 08 - Cable winch assembly
WeightModel
Transport position - PJ170C,E
Subject to change, production tolerances have to be taken into account.
Milieu de véhicule
Poids treuile a cable voire le feuille information techniques 08 - Montage du treuil a cable
PoidsModèle
Position de transport - PJ170C,E
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
4034 mm (158.82")
1374 mm (54.09")
4803 mm (189.09")
2671 mm (105.16")
2488 mm (97.95")
3665 mm (144.29")
1332 mm (52.44")
4782 mm (188.27")
2806 mm (110.47")
2384 mm (93.86")
3264 mm (128.50")
1281 mm (50.43")
4759 mm (187.36")
2859 mm (112.56")
2345 mm (92.32")
2780 mm (109.45")
1212 mm (47.72")
4732 mm (186.30")
2928 mm (115.28")
2295 mm (90.35")
2292 mm (90.24")
1128 mm (44.41")
4710 mm (185.43")
3050 mm (120.08")
2205 mm (86.81")
1839 mm (72.40")
1035 mm (40.75")
4688 mm (184.57")
3186 mm (125.43")
2110 mm (83.07")
1415 mm (55.71")
924 mm (36.38")
4666 mm (183.70")
3281 mm (129.17")
2045 mm (80.51")
889 mm (35.00")
803 mm (31.61")
4644 mm (182.84")
3336 mm (131.34")
2009 mm (79.09")
947(37.29")
5562
(218
.99"
)52
72(2
07.5
7")
2893
(113
.88"
)
X
1500 (59.06")
Y1 Y2
1850
(72.
84")
414 (16.30") 314 (12.36")
164 (6.46")
2210
(87.
02")
4699 (185.00") 4235 (166.73")
SZ (SZA)
3136
(123
.47"
)
9(H)8(G)7(F)6(E)4(C) 5(D)2(A) 3(B)
SZA=
SZ=
X
SZA
SZ
Y2
Y1
DTS511SHA/03
0800
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
voll ausgefahren
voll eingefahren
hydraulische Ausschübe
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Arbeitsstellungen
fully extended
fully retracted
hydraulic extensions
Subject to change, production tolerances have to be taken into account.
Working positions
completement sorties
completement rentres
extensions hydrauliques
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Position de travail
4014 mm (158.03")
1354 mm (53.31")
3645 mm (143.50")
1312 mm (51.65")
3245 mm (127.76")
1262 mm (49.69")
2762 mm (108.74")
1194 mm (47.01")
2275 mm (89.57")
1112 mm (43.78")
1824 mm (71.81")
1020 mm (40.16")
1403 mm (55.24")
912 mm (35.91")
1045 mm (41.14")
792 mm (31.18")
SZ (SZA)
4182 (164.64")
2792
(109
.93"
)
2631
(103
.57"
)
1705
(67.
13")
1340
(52.
77")
4746 (186.85")
9(H)8(G)7(F)6(E)4(C) 5(D)2(A) 3(B)
SZA=
SZ=
SZA
SZ
DTS511SHA/03
0900
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
voll ausgefahren
voll eingefahren
hydraulische Ausschübe
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Arbeitsstellungen
fully extended
fully retracted
hydraulic extensions
Subject to change, production tolerances have to be taken into account.
Working positions
completement sorties
completement rentres
extensions hydrauliques
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Position de travail
2550 (100.39")
225.0 kN (50560 lbs)
240.0 kN (53930 lbs)
1940 kg (4277 lbs)
1960 kg (4321 lbs)
2000 kg (4409 lbs)
2020 kg (4453 lbs)
340 (13.39")
2247 (88.46") 1123 (44.23")
2500 (98.43")
R3X 8600 (338.58") 4300 (169.29") 4300 (169.29")
340 (13.39")
2542 (100.09") 1271 (50.05")
R3X 8600 (338.58") 4300 (169.29") 4300 (169.29")
F max. F max.
LKW
STZYSTZS–STÜ03STZS STZY–STÜ01
LKW–STZS
LKW–STZY
F
F
max.
max.
B
B A
A
DTS511SHA/03
1000
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Ausführung:
Fahrzeugmitte
Kranabstützung - LKW
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Type:
Middle of vehicle
Crane support - LKW
Subject to change, production tolerances have to be taken into account.
Version:
Milieu de véhicule
Support de grue - LKW
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
2270 kg (5004 lbs)
2290 kg (5049 lbs)
2210 kg (4872 lbs)
2230 kg (4916 lbs)
340 (13.39") 2500 (98.43")
2247 (88.46") 1123 (44.23")
2550 (100.39")
225.0 kN (50560 lbs)
240.0 kN (53930 lbs)
R3X 8600 (338.58") 4300 (169.29") 4300 (169.29")
340 (13.39")
2542 (100.09") 1271
(50.05")
R3X 8600 (338.58") 4300 (169.29") 4300 (169.29")
F max. F max.
EGG
STZYSTZS–STÜ03STZS STZY–STÜ01
EGG–STZY
EGG–STZS
F
F
max.
max.
B
B
A
A
DTS511SHA/03
1100
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Ausführung:
Fahrzeugmitte
Kranabstützung - EGG
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Type:
Middle of vehicle
Crane support - EGG
Subject to change, production tolerances have to be taken into account.
Version:
Milieu de véhicule
Support de grue - EGG
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
658 (25.91")
360(14.17")
282
282
(11.10")
(11.10")
196
196
(7.72")
(7.72")
1608
(63.
31")
993
(39.
09")
Ø146 Ø146 (5.75") (5.75")
360 (14.17")
360(14.17")
658 (25.91")
1391
(54.
76")
885
(34.
84")
1114
(43.
84")
964
(37.
93")
1337
(52.
65")
910
(35.
84")
180°
180°
360 (14.17")
1637
(64.
46")
1060
(41.
75")
Ø146 Ø146 (5.75") (5.75")
360 (14.17")
STZY
STZS
STÜ01
STÜ03
DTS511SHA/03
1200
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Kranabstützung - LKW
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Crane support - LKW
Subject to change, production tolerances have to be taken into account.
Support de grue - LKW
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
360 (14.17")
1388
(54.
65")
773
(30.
43") Ø146
(5.75")11
69(4
6.02
")66
3(2
6.10
")
360 (14.17")
196 (7.72")
360 (14.17")
360 (14.17")
196 (7.72")
Ø146(5.75")
180°
180°
1417
Ø146
1184
(46.
60")
1117
(43.
99")
690
(27.
18")
(5.75")
1417
(55.
80")
840
(33.
08")
Ø146(5.75")
1334
(52.
50")
STZY
STZS
STÜ01
STÜ03
DTS511SHA/03
1300
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Kranabstützung - EGG
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Crane support - EGG
Subject to change, production tolerances have to be taken into account.
Support de grue - EGG
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
962
(37.
89")
600
(23.
62")
==
max. 1000 (39.37") min. 545
(min. 21.46")
1362
(53.
63")
1427
(56.
18")
1362
(53.
63")
1259
(49.
56")
1025
(40.
35")
962
(37.
89")
600
(23.
62")
min. 380 (14.96")
min. 653 (25.69")
340 (13.39")
1450 mm (57.09")
1450 mm (57.09")
110 (4.33") 25 (0.98")
ld
42 Cr Mo 4 V
42 Cr Mo 4 V
HIG 388
HIG 633
1550 Nm
2500 Nm
M36x1.5
M42x1.5
dd
l
14xEM 209
8xHTR3382
32xEM 083
4xHTR105216xHTR1051
1xEM 2374xHIG 633
8xHIG 388
UZ131
UZ131
UZ235
UZ235
l
Sou
s re
serv
e de
mod
ifica
tions
de
conc
eptio
n. L
es to
lera
nces
rel
ativ
es a
la te
chni
que
de p
rodu
ctio
n do
iven
t etr
e pr
ises
en
cons
ider
atio
n.S
ubje
ct to
cha
nge,
pro
duct
ion
tole
ranc
es h
ave
to b
e ta
ken
into
acc
ount
. K
onst
rukt
ions
ände
rung
en v
orbe
halte
n, fe
rtig
ungs
tech
n. T
oler
anze
n m
üsse
n be
rück
sich
tigt w
erde
n.
DTS511SHA/03
1400
12/2005PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Fahrzeugmitte
AnzugsmomentBridenschrauben Werkstoff
Stationärmontage ist nicht zulässig
Bridenschrauben
Bridenschrauben
Montage mit 8 Bridenschrauben
Montage mit 4 Bridenschrauben
MONTAGE AUF FAHRZEUG
FahrzeugrahmenFahrzeugrahmen
Anordnung der Bridenschrauben
Middle of vehicle
Tightening torqueBolts Work material
Stationary mounting is not permissible
Bolts
Bolts
Mounting with 8 bolts
Mounting with 4 bolts
MOUNTING ON VEHICLE
Vehicle frameVehicle frame
Location of mounting bolts
Milieu de véhicule
Couple de serrageBrides Matériel
Montage stationaire n'est pas admissible
Brides
Brides
Montage avec 8 brides
Montage avec 4 brides
MONTAGE A VÉHICULE
Châssis de véhiculeChâssis de véhicule
Arrangement de brides
12°
106.9kN
137.3kN
188.4kN
245.3kN25000kg
19200kg
14000kg
10900kg
–4m
–2m
0m
12m
10m
8m
6m
4m
2m
0m 0m
8m6m4m2m0m
DTS511SHA/04
0100
07/2010PK 85002 A
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
12°
245.3kN
184.4kN
134.4kN
103.0kN
83.4kN8500kg
10500kg
13700kg
18800kg
25000kg
0m0m
2m
4m
6m
8m
10m
12m
14m
0m
–2m
–4m0m 2m 4m 6m 8m 10m
DTS511SHA/04
0200
07/2010PK 85002 B
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
12°245.3kN
178.5kN
129.5kN
99.1kN
79.5kN
65.7kN6700kg
8100kg
10100kg
13200kg
18200kg
25000kg
0m
2m
4m
6m
8m
10m
12m
14m
16m
0m 0m
–2m
–4m0m 2m 4m 6m 8m 10m 12m
DTS511SHA/04
0300
07/2010PK 85002 C
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
12°
52.0kN
61.8kN
75.5kN
95.2kN
124.6kN
172.7kN
245.3kN25000kg
17600kg
12700kg
9700kg
7700kg
6300kg
5300kg
–4m
–2m
0m
18m
16m
14m
12m
10m
8m
6m
4m
2m
0m
0m 2m 4m 6m 8m 10m 12m 14m
DTS511SHA/04
0400
07/2010PK 85002 D
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabeKonstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacité
12°
42.2kN
49.1kN
58.9kN
72.6kN
91.2kN
120.7kN
166.8kN
245.3kN25000kg
17000kg
12300kg
9300kg
7400kg
6000kg
5000kg
4300kg
–4m
–2m
0m
20m
18m
16m
14m
12m
10m
8m
6m
4m
2m
0m
0m 2m 4m 6m 8m 10m 12m 14m 16m
DTS511SHA/04
0500
07/2010PK 85002 E
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
12°245.3kN
161.9kN
116.7kN
88.3kN
68.7kN
55.9kN
46.1kN
39.2kN
34.3kN
4000kg
25000kg
16500kg
11900kg
9000kg
7000kg
5700kg
4700kg 3500kg
–4m
–2m
0m0m
22m
20m
18m
16m
14m
12m
10m
8m
6m
4m
2m
0m
18m16m14m12m10m8m6m4m2m0m
DTS511SHA/04
0600
07/2010PK 85002 F
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
12°
29.4kN
32.4kN
37.3kN
43.2kN
53.0kN
66.7kN
85.3kN
113.8kN
158.9kN
244.3kN24900kg
16200kg
11600kg
8700kg
6800kg
5400kg
4400kg
3800kg
3300kg
3000kg
0m0m
2m
4m
6m
8m
10m
12m
14m
16m
18m
20m
22m
24m
26m
0m
–2m
–4m20m18m16m14m12m10m8m6m4m2m0m
DTS511SHA/04
0700
07/2010PK 85002 G
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
12°
23.5kN
26.5kN
30.4kN
35.3kN
42.2kN
51kN
64.7kN
83.4kN
111.8kN
156.0kN
234.5kN23900kg
15900kg
11400kg
8500kg
6600kg
5200kg
4300kg
3600kg
3100kg
2700kg
2400kg
–4m
–2m
0m0m
26m
28m
24m
22m
20m
18m
16m
14m
12m
10m
8m
6m
4m
2m
22m20m18m16m14m12m10m8m6m4m2m0m
DTS511SHA/04
0800
07/2010PK 85002 H
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
2000kg
3210kg
2490kg
4530kg
6500kg
3070
2040
3210
2410
1900
2490
3400
2220
4530
1940
1770
2000
3770
2420
6500
kg
kg
kg
kN
kN
kN 44.4 31.5 24.4 19.6
19.6kN
24.4kN
31.5kN
44.4kN
63.8kN
23.7 21.8 20.0 18.6 17.4
37.0 33.4 30.1 23.6 19.0
63.8
80°
70°
45°
25°
0m 5m 10m 15m 20m 25m
5m
10m
15m
20m
25m
30m
0m
DTS511SHA/04
0900
07/2010PK 85002 E PJ 170 CPK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
6500kg
4190kg
1220kg
2240kg
1430kg
2940kg
1020kg
1760kg
2830 1170
1800 1210
2940 1220
2160 980
1660 1010
41kg
2240 1020
3150 1380
1980 1420
4190 1430
1700
1540
1760
3520
2180
6500
kg
kg
kg
kN
kN
kN 41.1 14.028.8 12.022.0 10.017.3
17.3kN
10.0kN
22.0kN
12.0kN
28.8kN
14.0kN
41.1kN
63.8kN
21.4 19.4 13.917.7 11.916.3 9.9
90lbs
15.1
34.5 30.9 13.527.8 11.521.2 9.616.7
63.8
25°
45°
70°
80°
0m
35m
30m
25m
20m
15m
10m
5m
30m25m20m15m10m5m0m
DTS511SHA/04
1000
07/2010PK 85002 E PJ 170 EJV1PK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
D SP ual ower ystem
1860 17302020 16102210kg
1530kg
2480kg
1910kg
3530kg
4600kg
3210
2400
1550
2480
2490
1840
1450
1910
4530
2800
1680
3530
2000
1480
1360
1530
6500
3080
1820
4600
kg
kg
kg
kg
kN
kN
kN
kN
kN 34.6 24.3 18.7 15.0
15.0kN
18.7kN
24.3kN
34.6kN
45.1kN
63.8 44.4 31.5 24.4 19.6
21.7 19.8 18.2 17.0 15.8
17.9 16.5 15.2 14.2 13.3
30.2 27.5 23.5 18.1 14.5
45.1
80°
70°
45° 25°
0m
30m
25m
20m
15m
10m
5m
25m20m15m10m5m0m
DTS511SHA/04
1100
07/2010PK 85002 F PJ 170 C DPS
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
1720kg
2780kg
2150kg
3940kg
4600kg
kg
kg
kg
4600
1820
3080
1720
1360
1670
3940
1680
2800
2150
1450
2080
2780
1550
2540
kN
kN
kN 38.7 27.3 21.1 16.9
16.9kN
21.1kN
27.3kN
38.7kN
45.1kN
17.9 16.5 15.2 14.2 13.3
30.2 27.5 24.9 20.4 16.4
45.1
80°
70°
45° 25°
0m
30m
25m
20m
15m
10m
5m
25m20m15m10m5m0m
DTS511SHA/04
1200
07/2010PK 85002 F PJ 170 CPK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
D SP ual ower ystem
1620 980128014901780 117013801970kg
4600kg
3230kg
1670kg
2220kg
1050kg
890kg
730kg
1300kg
kg
kg
kg
kg
4600
1580
2830
6500
1300
1120
1250
1760
890
880
850
1220
3230
1440
2550
4190
1670
1210
1610
2240
1050
1040
1000
1430
730
730
700
1020
2220
1320
2150
2930
41kg
kN
kN
kN
kN
kN 31.7 21.8 16.4 12.8 10.3 8.7 7.2
7.2kN
8.7kN
10.3kN
12.8kN
16.4kN
21.8kN
31.7kN
45.1kN
63.8 41.1 28.7 22.0 17.3 14.0 12.0 10.0
19.3 17.5 15.9 14.6 13.5 12.6 11.5 9.6
15.5 14.1 12.9 11.9 11.0 10.2 8.6 7.2
0.4kN
27.8 25.0 21.1 15.8 12.3 9.8 8.3 6.9
45.1
80°
70°
45° 25°
0m
35m
30m
25m
20m
15m
10m
5m
30m25m20m15m10m5m0m
DTS511SHA/04
1300
07/2010PK 85002 F PJ 170 EJV1 DPS
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
4600kg
3620kg
1900kg
2520kg
1210kg
1020kg
850kg
1490kg
kg
kg
kg
4600
1580
2830
1490
1120
1430
1020
980
980
3620
1440
2550
1900
1210
1830
1210
1040
1160
850
840
820
2520
1320
2300
41kg
kN
kN
kN 35.5 24.7 18.6 14.6 11.9 10.0 8.3
8.3kN
10.0kN
11.9kN
14.6kN
18.6kN
24.7kN
35.5kN
45.1kN
15.5 14.1 12.9 11.9 11.0 10.2 9.6 8.2
90lbs
27.8 25.0 22.6 18.0 14.0 11.4 9.6 8.0
45.1
80°
70°
45° 25°
0m
35m
30m
25m
20m
15m
10m
5m
30m25m20m15m10m5m0m
DTS511SHA/04
1400
07/2010PK 85002 F PJ 170 EJV1PK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
1370kg
2210kg
1700kg
3140kg
4500kg
kg
kg
kg
4500
2000
3260
1370
1330
1330
3140
1850
2960
1700
1610
1650
2210
1720
2150
kN
kN
kN 30.8 21.7 16.7 13.4
13.4kN
16.7kN
21.7kN
30.8kN
44.1kN
19.6 18.1 16.9 15.8 13.0
32.0 29.0 21.1 16.2 13.0
44.1
80°
70°
45° 25°
0m
30m
25m
20m
15m
10m
5m
25m20m15m10m5m0m
DTS511SHA/04
1500
07/2010PK 85002 F PJ 125 CPK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
4300kg
2860kg
1480kg
1980kg
930kg
800kg
660kg
1160kg
kg
kg
kg
4300
1800
3030
1160
1120
1120
800
760
760
2860
1640
2740
1480
1400
1430
930
900
900
660
640
640
1980
1510
1920
28kg
kN
kN
kN 28.1 19.4 14.5 11.4 9.1 7.8 6.5
6.5kN
7.8kN
9.1kN
11.4kN
14.5kN
19.4kN
28.1kN
42.2kN
17.7 16.1 14.8 13.7 11.0 8.8 7.5 6.3
0.3kN
29.7 26.9 18.8 14.0 11.0 8.8 7.5 6.3
42.2
80°
70°
45° 25°
0m
35m
30m
25m
20m
15m
10m
5m
30m25m20m15m10m5m0m
DTS511SHA/04
1600
09/2010PK 85002 F PJ 125 EJV1PK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
D SP ual ower ystem
720kg
1200kg
900kg
1770kg
2600kg
kg
kg
kg
kg
kg
2600
4500
2600
1840
1550
700
1370
720
1330
700
1720
3140
1770
1700
1440
870
1700
900
1470
870
1170
2210
1200
1570
1170
kN
kN
kN
kN
kN
7.1kN
8.8kN
11.8kN
17.4kN
25.5kN
25.5
44.1
25.5
18.1
15.2
16.9
30.8
17.4
16.7
14.1
11.5
21.7
11.8
15.4
11.5
8.5
16.7
8.8
14.4
8.5
6.9
13.4
7.1
13.0
6.9
25°45°
70°
80°
0m 5m 10m 15m 20m 25m 30m
5m
10m
15m
20m
25m
30m
35m
0m
DTS511SHA/04
1700
07/2010PK 85002 G PJ 125 C DPS
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
830kg
1380kg
1040kg
2000kg
2600kg
kg
kg
kg
2600
2600
1550
800
830
800
1950
2000
1440
1010
1040
1010
1340
1380
1340
kN
kN
kN
8.1kN
10.2kN
13.5kN
19.6kN
25.5kN
25.5
25.5
15.2
19.1
19.6
14.1
13.1
13.5
13.1
9.9
10.2
9.9
7.8
8.1
7.8
25°45°
70°
80°
0m 5m 10m 15m 20m 25m 30m
5m
10m
15m
20m
25m
30m
35m
0m
DTS511SHA/04
1800
07/2010PK 85002 G PJ 125 CPK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
400kg
340kg
270kg
520kg
1000kg
700kg
1540kg
2600kg
960
1360
1000
1980
960
670
1255
250
28kg
640
380
900
700
1480
270
660
400
930
670 250380
1220
1480
1540
2860
1500
500
1120
320
760
520
1160
340
790
500 320
1330
1620
2600
4500
2490
kg
kg
kg
kg
kg
4.9
11.0
3.1
7.5
5.1
11.4
3.3
7.7
4.9 3.1
6.6
12.3
2.5
0.3kN
6.3
3.7
8.8
6.9
14.5
2.6
6.5
3.9
9.1
6.6 2.53.7
9.4
13.3
9.8
19.4
9.4
12.0
14.5
15.1
28.1
14.7
13.0
15.9
25.5
44.1
24.4
25.5kN
15.1kN
9.8kN
6.9kN
5.1kN
2.6kN
3.3kN
3.9kN
kN
kN
kN
kN
kN
80°
70°
45° 25°
0m
35m
40m
30m
25m
20m
15m
10m
5m
30m 35m25m20m15m10m5m0m
D SP ual ower ystem
DTS511SHA/04
1900
07/2010PK 85002 G PJ 125 EJV1 DPS
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
500kg
410kg
340kg
630kg
1170kg
840kg
1770kg
2600kg
1130
1170
1130
800 320
28kg
470
840 340500
800 320470
1220
1770
1720
600 400
630 410
600 400
1330
2600
2490
kg
kg
kg
5.9 3.9
6.2 4.0
5.9 3.9
7.8 3.1
0.3kN
4.6
8.2 3.34.9
7.8 3.14.6
11.1
11.5
11.1
12.0
17.4
16.9
13.0
25.5
24.4
25.5kN
17.4kN
11.5kN
8.2kN
6.2kN
3.3kN
4.0kN
4.9kN
kN
kN
kN
80°
70°
45° 25°
0m
35m
40m
30m
25m
20m
15m
10m
5m
30m 35m25m20m15m10m5m0m
DTS511SHA/04
2000
07/2010PK 85002 G PJ 125 EJV1PK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
PK 85002 V1H
90kg
24.9m
2100kg
20°
DTS511SHA/04
2100
07/2010V1
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Einstufung: HC1 HD4/B3 nach EN12999
Traglast-Verlängerung
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Classification: HC1 HD4/B3 in EN12999
Load capacity-Extension
Subject to change, production tolerances have to be taken into account.
Classement: HC1 HD4/B3 en mesure EN12999
Force portante-Rallonge
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Dual Power System
plusDPS
1860 17302020 16102210kg
4600kg
3940kg
2150kg
2780kg
1720kg
3210
2540
1550
2780
2490
2080
1450
2150
4530
2800
1680
3940
2000
1670
1360
1720
6500
3080
1820
4600
kg
kg
kg
kg45.1
16.420.424.927.530.2
13.314.215.216.517.9
15.817.018.219.821.7
19.624.431.544.463.8
45.1kN
38.7kN
27.3kN
21.1kN
16.9kN
16.921.127.338.7kN
kN
kN
kN
kN
80°
70°
45° 25°
0m
30m
25m
20m
15m
10m
5m
25m20m15m10m5m0m
DTS511SHA/04
2200
07/2010PK 85002 F PJ 170 C DPS+PK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Dual Power System
plusDPS
kg 1970 1380 11701780 1490 1280 9801620
1490kg
850kg
1020kg
1210kg
2520kg
1900kg
3620kg
4600kg
41kg
2930
2300
1320
2520
1020
820
840
850
1430
1160
1040
1210
2240
1830
1210
1900
4190
2550
1440
3620
1220
980
980
1020
1760
1430
1120
1490
6500
2830
1580
4600
kg
kg
kg
kg 45.1
8.09.611.414.018.022.625.027.8
0.4kN
8.29.610.211.011.912.914.115.5
9.611.512.613.514.615.917.519.3
10.012.014.017.322.028.741.163.8
45.1kN
35.5kN
24.7kN
18.6kN
14.6kN
11.9kN
10.0kN
8.3kN
8.310.011.914.618.624.735.5kN
kN
kN
kN
kN
80°
70°
45° 25°
0m
35m
30m
25m
20m
15m
10m
5m
30m25m20m15m10m5m0m
DTS511SHA/04
2300
07/2010PK 85002 F PJ 170 EJV1 DPS+
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Dual Power System
plusDPS
830kg
1380kg
1040kg
2000kg
2600kg
1340
1570
1380
2210
1340
1010
1470
1040
1700
1010
1440
1700
2000
3140
1950
800
1330
830
1370
800
1550
1840
2600
4500
2600
kg
kg
kg
kg
kgkN
kN
kN
kN
kN
8.1kN
10.2kN
13.5kN
19.6kN
25.5kN
25.5
44.1
25.5
18.1
15.2
19.1
30.8
19.6
16.7
14.1
13.1
21.7
13.5
15.4
13.1
9.9
16.7
10.2
14.4
9.9
7.8
13.4
8.1
13.0
7.8
25°45°
70°
80°
0m 5m 10m 15m 20m 25m 30m
5m
10m
15m
20m
25m
30m
35m
0m
DTS511SHA/04
2400
07/2010PK 85002 G PJ 125 C DPS+PK 85002 HPLS
TypeModelModellPagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Dual Power System
plusDPS
500kg
410kg
340kg
630kg
1170kg
840kg
1770kg
2600kg
kg
kg
kg
kg
kg
2490
4500
2600
1620
1330
400600
790
410
1160
630
760
400
1120
600
1720
2860
1770
1480
1220
570 320800
930
500
660
340
1480
840
900
470
640
28kg
320
1255
800
1130
1980
1170
1360
1130
kN
kN
kN
kN
kN
4.9kN
4.0kN
3.3kN
6.2kN
8.2kN
11.5kN
17.4kN
25.5kN
24.4
44.1
25.5
15.9
13.0
16.9
28.1
17.4
14.5
12.0
11.1
19.4
11.5
13.3
11.1
5.6 3.17.8
9.1
4.9
6.5
3.3
14.5
8.2
8.8
4.6
6.3
0.3kN
3.1
12.3
7.8
3.95.9
7.7
4.0
11.4
6.2
7.5
3.9
11.0
5.9
80°
70°
45° 25°
0m
35m
40m
30m
25m
20m
15m
10m
5m
30m 35m25m20m15m10m5m0m
DTS511SHA/04
2500
07/2010PK 85002 G PJ 125 EJV1 DPS+
PK 85002 HPLSTypeModelModell
PagePageSeite
ChapitreChapterKapitel
EditionEditionAusgabe
Zulässige Traglasten für Seilwinde siehe Datenblatt DTKBW0000-04.0100
Krandarstellung symbolisch, Angaben bei 20°Hauptarmstellung & Lastarm horizontal
Einstufung: HC1 HD4/B3 nach EN12999
Die Tragkräfte laut Diagramm verringern sich bei Verwendung von mechanischen Verlängerungen um deren Eigengewicht.
Traglastdiagramm
Konstruktionsänderungen vorbehalten, fertigungstechn. Toleranzen müssen berücksichtigt werden.
For Rope winch load capacity refer to page DTKBW0000-04.0100
Symbolic crane figure, indications at 20°main boom position & load arm in horizontal position
Classification: HC1 HD4/B3 in EN12999
When using mechanical boom extensions, the loads, shown on the charts need to be reduced by the weight of these extensions.
Lifting capacity diagram
Subject to change, production tolerances have to be taken into account.
Charges autorisées pour le treuil, voir DTKBW0000-04.0100
Représentation symbolique de la grue, indication avec angle de premier bras 20°et extensions an position horizontale
Classement: HC1 HD4/B3 en mesure EN12999
Les charges admissibles du diagramme ci-apres se reduisent du poids de la rallonge manuelle utilisee.
Diagramme de capacité
Sous reserve de modifications de conception. Les tolerances relatives a la technique de production doivent etre prises en consideration.