dual shot | sport owners manual€¦ · pop-a-shot dual shot-sport sku# pasdss19-02 page 14/17 snap...

DUAL SHOT | SPORT OWNERS MANUAL

SKU# PASDSS19-02 WWW.POP-A-SHOT.NET

Required Phillips Head Screwdriver (Not included) Flat Head Screwdriver (Not included) Allen Wrench (Included) Wrench (Included) Tip: The included tools will certainly do the job, but you probably have better tools of your own.

Recommended (but not required) Electric Screwdriver Tip: Make sure to set the tool to a very low torque to prevent damage to the game. Socket Wrench Set Level

Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list page.

Find a clean, level place to begin assembling your Pop-A-Shot game. Like most things in life, putting together your Pop-A-Shot is better when done with a friend.

Tip: (we’ll tell you when).

If you can’t find someone to help for the entire time, at least try to get help at certain times

Tip: Before putting your game together, please visit our Support Page at www.pop-a-shot.net/support There you’ll find more hints and hacks to help you put together your new game.

We hope you love your Pop-A-Shot and will let your friends and family (and any review sites) know how you feel. If you do have a problem (and it happens), please let us know first and give us a chance to fix it. Email: [email protected]

Read all instructions: All the safety and operating instructions should be read carefully before thisproduct is operated or played. Caution: This is not a toy and is intended for use by or under the supervision of adults. Adults should review safety guidelines with children to avoid possible risk of electric shock or other injuries. Recommend: The game should be periodically examined for conditions that may result in the risk of fire,electrical shock or injury to persons. In the event such conditions exist, the game should not be used until properly repaired. Storage: This product is made from wood-based components and is sensitive to extreme temperatures

/17WWW.POPASHOT.NET Pop-A-Shot Dual Shot-Sport SKU# PASDSS19-02

10

Extra LongBolt

ExtensionTube

DiagonalTube

ConnectorTubeVertical Tube

TopElbow TubeBase Tube

Back TubeFront Tube

AllenWrench

Bottom Tube

Back Board Scoreboard Metal Bolt Paddles Control Panel

Air Pump

BallsNut

BoltShortBolt

MediumBolt Washer

Rim Back Plate

Net

PlasticSpacer

Ball ReturnRamp

Lean Bar

Wrench

x2 x2 x2

ForwardTube x1

x2 x2 x2

1 2 3 4 5 6

7 8 9 1110 12

13 14 15 16 17

19 20 21 22 23 24

x2 x2 x2x2 x1 x1

x10 x4 x6 x16 x76x6

x40 x2 x1 x1 x4

x1

x1

x1

x1 x1 x2x4

25 26

31

x1

32

27 28 29 30

AC Adapter

DUAL SHOT SPORT-PARTS LIST


DUAL SHOT SPORT-NUMBERED PARTS

1

1

2

3

6

8

29

5

6

10

4

4

7

7

3

2

25

59


1

STEP 2

3

3

2

1

1

6

2

1

19

18

6

18

19

18 14

14 18

Attach the Base Tubes (#1) with a Connector Tube (#6) using aBolt (#14), two Washers (#18) and a Nut (#19).

Put the Vertical Tubes (#2) into the Base Tubes (#1), then put the Elbow Tubes (#3) into the Vertical Tubes (#2).


Attach the Base Tubes (#1) and Vertical Tubes (#2) with aConnector Tube (#6) using a Bolt (#14), two Washers (#18)and a Nut (#19).

619 18

18

14

Attach the Extension Tubes (#4) to the Base Tubes (#1) using a Short Bolt (#13), two Washers (#18) and a Nut (#19).

3

3

2

1

1

6

2

19 18

4

4

18

13

3

2

1

1

6

6

2

3


5

5

1918

15

1813

15

18

18

19

13

Take the Diagonal Tubes (#5) and telescope into full length(Fig. 5A).

Attach the Diagonal Tubes (#5) to the outside of theVertical Tubes (#2) using a Short Bolt (#13), onePlastic Spacer (#15), one Washer (#18) anda Nut (#19) (Fig. 5B).

Attach the other end of the Diagonal Tubes (#5) to the outside of the Forward Tubes (#4) using a Short Bolt (#13), one Plastic Spacer (#15), one Washer (#18) and a Nut (#19) (Fig. 5C).

Figure 5A

Figure 5C

5

4

Figure 5B


Attach the Front Tubes (#7) to the Extension Tubes (#4) using the spring locks (Fig. 6A).

Attach the Bottom Tube (#8) to the Front Tubes (#7) using the spring locks (Fig. 6B).

Attach the Lean Bar (#9) to the top of the Front Tubes (#7) using the spring locks.

8

7

4

7

Figure 6A

Figure 6B

9

8


Attach the Rims (#11) to the Backboard (#25) and the Backplates (#12) using Bolts (#17), two Washers (#18) and Nuts (#19).

Attach the Scoreboard (#26) onto the rear of the Backboard (#25) using the Short Bolts (#27).

19

19

18

1218

25

11

18

17

17

27

25

18


26

Attach the Paddles (#28) to the Backboard (#25) using Bolts (#17), two Washers (#18) and Nuts (#19). Plug the Paddles jacks into the corresponding ports on the Scoreboard (#26).

Attach the Nets (#20) to the Rims (#11).

1825

18

1828

2818

18

18

19

19


Tip: Try to get a helper for this part.

Attach the Backboard (#25) to the top of the Vertical Tubes (#2) using a Bolt (#16), two Washers (#18) and a Nut (#19).

Attach a Back Tube (#10) to both Vertical Tubes (#2) using Medium Bolts (#14), Washers (#18) and Nuts (#19).

27

25

10

1814

19

3

2

2

18

19 18

16


Install The Ramp And NetFeed each Ball Return Ramp (#24) sleeve over a Top Elbow Tube (#3) (Fig.13A).Thread the front of the Ball Return Ramp (#24) onto Forward Tube (#29) (Fig.13B). Flip the Forward Tube (#29) and the attached Ball Return Ramp (#24) over the Lean Bar (#9) and align the bolt holes of each bar (Fig.13C).

Attach Forward Tube (#29) to Front Tube (#7) and Lean Bar (#9) using an Extra Long Bolt (#16), Two Washers (#18), and a Nut (#19) (Fig.13D).

Figure 13A

24

18

29

9

7

18

16

19

2924

Figure 13B

Figure 13C

Figure 13D


Pull the Ramp under the Back Tube (#10). Slide the other Back Tube (#10) through the sleeve of the Ball Return Ramp (#24) and attach to the bottom of the scoreboard with a Bolt (#16), two Washers (#19) and a Nut (#18) (Fig.14B).Tighten the front of the Ball Return Ramp (#24) using the velcro strapsin the front (Fig. 14C).

Note: Make sure the Back Tube (#10) is in front of the ramp (Fig. 14A)

Figure 14A

Figure 14C

10


Figure 14B

1618

18

19


Snap the Control Panel (#30) onto the middle of the Lean Bar (#9) (Fig 16A).

Thread the control panel wire through the hole of the laminated Game Operations“Cheat Sheet” until the cheat sheet is next to the Control Panel wire. Weave the wire throughthe loops of the right side of the ramp towards the back of the backboard.Plug the Control Panel wire into the outlet labeled “Control” in the Scoreboard.Plug the AC Adapter (#32) to the Scoreboard and into the wall outlet.Optional: You may use 3 AAA batteries (not included).

Tip: You’ll find complete game directions and operations in this booklet.The “Cheat Sheet” is intended as a quick reference guide.

YOU’RE READY TO PLAY!

Figure 16A


COMPLETED GAME


Now that you’ve put your Classic Dual together, let’s get started playing!

Push GAME until desired Game Number is displayed, then press START to begin.

To turn Game o�, press and Hold START.

1. Standard: 2 Players/:30Announcer and clock will count down to startBonus: :15 extra at 30 points; :10 extra at 60 points Baskets are 2 points until final :10when they’re 3 points

2. Solo: 1 Player/:30Only 1 basket is active

Announcer and clock will count down to startBonus: :15 extra at 30 points; :10 extra at 60 points Baskets are 2 points until final :10 when they’re 3 points

3. Crisscross: 2 Players/:30Players shoot at their opponent’s basketAnnouncer and clock will count down to startBonus: :15 extra at 30 points; :10 extra at 60 points Baskets are 2 points until final :10 when they’re 3 points

4. Skeet Shooting: 1 or 2 PlayersAnnouncer says “Shoot”, then have :03 to make basket

5. Sharp Shooter: 1 PlayerAnnouncer says “Left” or “Right” and scoreboard indicates “L” or “R”, then have :03 to makea shot in that basket

6. Climbing the Ladder: 2 Players/:30 First basket is 2 points; each subsequent basket is an additional point (3, 4, 5, etc.)If no basket is made within :03, next basket is 2 pointsBonus: :15 extra at 30 points; :10 extra at 60 points

7. Overtime: 2 Players/1:00Baskets are 2 points until final :10 when they’re 3 pointsBonus: :15 extra at 30 points; :10 extra at 60 points

8. Sudden Death: 2 Players/:15Baskets are 2 points until final :10 when they’re 3 pointsBonus: :15 extra at 30 points; :10 extra at 60 points

9. Free Play: 1-2 Players/No clock All baskets count 2 points

10. Team: 2 Players /:30 Score displays on both sidesAnnouncer and clock will count down to startBonus: 15 extra at 30 points; :10 extra at 60 points Baskets are 2 points until final :10 when they’re 3 points


POP-A-SHOT DUAL SHOT | SPORT

© Copyright 2019 Pop-A-Shot

dual shot | sport owners manual€¦ · pop-a-shot dual shot-sport sku# pasdss19-02 page 14/17 snap...

Documents