dualproof fbvf - bpa-waterproofing.com · dualproof fbvf bpa gmbh behringstr. 12 d- 71083...
TRANSCRIPT
Waterproofing below-ground with DualProof Membrane Technology
DualProof FBVF
BPA GmbHBehringstr. 12D- 71083 Herrenberg-GültsteinTel: +49 – (0) 7032 / 89399 – 0Fax: +49 – (0) 7032 / 89399 – 29eMail: [email protected]: www.dichte-bauwerke.de
Waterproofing is our Passion
Our profileSince its establishment in 1998, BPA GmbH has grown to become the technical standard bearer
in the fields of structural waterproofing, construction joint sealing, tunnel sealing and
the refurbishment of concrete structures.
Through innovative system-based solutions, numerous product patents, independent product
accreditations, high-quality products, and our friendly and skilled technical advice,
BPA has become a Global Leader in the provision of innovative Structural Waterproofing and
Sealing Systems with many prestigious job references worldwide. "Waterproofing is our Passion!"
Specification servicesWe provide our specification services to Architects, Engineers,Tunnel Builders and Specifiers throughout the design anddocumentation stages. BPA can provide ongoing supportto the completion of your project through our international network and partners around the world.
Our Services:• Product - Application and Site Support
• Product Documentation and Samples
• Consulting & Engineering
• High Qauality Manufacturing Process
• Continuing Professional Development seminars
• Contractor Support - economical site solutions
• Advice on Quality requirements & documentation
Innovative and successful over a long number of years
German and Swiss based manufacturerBPA is a leading manufacturer of structural waterproofing products and below ground sealing systems. With manufacturing locations in both Germany and Switzerland and quality driven product development teams, BPA design and manufacture goods specifically for theWorldwide waterproofing market for below ground structures.
Our rangeBPA’s range of waterproofing and concrete construction products include engineering and architectural waterproofing, concrete technology, concrete sealing,
jointing systems, sealants, waterproofing materials, waterproofing membranes, bentonite based sealing systems, bentonite double sealing membranes, pre-applied concrete bonding membranes, self-healing membranes and water stops.
The DualProof waterproofing system is proven technology and has successfully waterproofed many below-ground concrete structures since its launch. It can be found in projects in many countries around the world and is quite simply one of the best performing cost-effective below-ground waterproofing solutions available today.
Brochure contents• Innovative Technology• BS 8102:2009, DIN 18195 T6, DIN V 20000-202• The benefits of using DualProof• Typical applications• A system-based solution
DualProof waterproofing membrane
2 3
The most innovative medium-sizedbusinesses
Innovative anti-tracking, pre-applied waterproofing systemThe solution that stands the test of lifetime
Concrete Walls Under-Slab Pipe Penetration
4 5
4 5
Below-ground waterproofingFor below-ground structures where the exterior face of the structural concrete is inaccessible, the waterproofing must be applied prior to pouring the concrete. Conventional systems are either loose-laid or self-adhering to the substrate not the structural concrete, this means there is no seal between the waterproofing and the structural concrete which can lead to water travelling between the waterproofing and the structure from any leakages that may occur. BS 8102:2009 highlights this problem and recommends that a fully-bonded pre-applied waterproofing system be used to mitigate this risk. A similar problem occurs where ground settlement takes place. BPA has developed an innovative system, DualProof, which incorporates a unique FiberTex-fleece.
The DualProof membrane is installed with the "FiberTex" non-woven fleece facing the concrete which is to be waterproofed.The fleece mechanically bonds to freshly placed concrete giving a unique waterproof seal, preventing any lateral water migration.It is installed rapidly with no need for blinding concrete, priming or protection and can be trafficked immediately after application. It is Radon Gas resistant and highly durable and is unaffected by contaminants within the ground. Quality is assured through MPA,KIWA, DIN EN 13967, CE-Certification, DIN V 20000-202 and DualProof is suitable for use in accordance with SIA, DIN and BS.
• Easy installation - no blinding concrete or protection required.
• Assured watertight integrity - overbridges cracks Mechanical bond to the fresh concrete
• No water-tracking - improoving concrete strength• Easy jointing independent of temperature
-working temperature -5 up to 45 degree Celsius• Integrity assured at pile caps• Excellent solution for insitu concrete.• Protects structure against ground
contaminants and slat water• Long term watertight durability
The actual BS 8102:2009 standard for waterproofing below-ground structures, gives recommendations and provides guidance on methods of dealing with and preventing the entry of water from surrounding ground into a structure below ground level. Designers are encouraged to follow a process chart, to ensure that the correct waterproofing system will be selected. Some of the recommendations are highlighted below;
• To help mitigate risk, specify a combination of various types of compatible protection sourced from the same manufacturer -- BPA combines Type A and Type B waterproofing
• Where a waterproofing barrier is required for a structure supported on piled foundations, special consideration should be given to the detailing so that structural continuity is not compromised.
• Strategies for dealing with groundwater, soil gases and contaminants should be considered from the earliest stages of the planning and design processes.
• Products that are both water and gasproof are more cost-effective. DualProof is Radon-tight!• Where waterproofing admixtures are used, these should be in conjunction with other
waterproofing components supplied by the same manufacturer, e.g. waterstops, membranes and sealants.
• Fully bonded systems allow potential defects to be located and made good more easily.• Each project structure should be designed to its particular Grade
BS 8102:2009, DIN, SIA
Grade Example of use of structure Performance level
1 Car parking; Plant rooms (excluding electrical equipment); Workshops.
Some seepage and damp areas tolerable, dependent on the intended use.Local drainage might be necessary to deal with seepage.
2 Plant rooms and Workshops requiring a drier environment (than grade 1); Storage areas.
No water penetration acceptable.Damp areas tolerable; ventilation might be required.
3 Ventilated residential and commercial areas, including offices, restaurants etc ; Leisure centres.
No water penetration acceptable.Ventilation, dehumidification or air conditioning necessary, appropriate to the intended use.
One, or a combination, of the following types of waterproofing protection should be selected:Type A – (barrier) protectionProtection against water ingress which is dependent on a separate barrier system applied to the structure. e.g. DualProof, SilverSeal or CEMtobent
Type B – (structural integral) protectionProtection against water ingress which is provided by the concrete structure.e.g. CEMflex-Admixtures in conjunction with Predimax, CEMswell, Quellmax, CEMflex
Type C – (drained) protectionProtection against water ingress into usable spaces which is provided by the incorporation of an appropriate internalwater management system. e.g. CEMdrain
DualProof is the professionals choice for fully-bonded Type A barrier protection for below-groundstructures to achive a basement Grades 1, 2 + 3 as described in BS 8102:2009. It is fully compatible with the BPA CEMdrain drainage and protection board and the CEMflex liquid waterproofing concreteadmixtures assuring best system performance which may be sourced from one premium supplier.
DualProof pre-applied premium waterproofing system "Made in Germany"• Structural concrete + CEMflex water-stop• Steel reinforcement + DualProof
DualProof - saves time, saves labour cost and money
6 7
DualProof fulfills DIN V 20000-202 Use of building products in construction works DualProof fulfills DIN 18195 T6 Waterproofing against outside pressing water and
accumulating seepage water, design and execution (German & European) DualProof fulfills BS 8102 Type A (British) and SIA 272 (Swiss)
DIN - German StandardSIA - Swiss StandardBS - British StandardEN - European Standard
BPA below-ground waterproofing solutions
Construction applications• Single-sided formwork concrete walls• Double-sided formwork concrete walls• Pile caps• Lift pits• Pipe penetrations• Expansion and construction joints
BPA system solutions• DualProof pre-applied anti-tracking waterproofing membrane• DualProof liquide membrane, DualProof QS, CEM805 - ancillary products• CEMdicht 3 in 1 - cementitious tanking slurry for pile caps• CEMswell / CEM805 active - swellable hydrophilic rubber-based waterstops for joints / hydrophilic bonding and sealing agent• CEMproof PVC waterstops - PVC waterstops for joints• CEM805 MS - one-component flexible sealant for joints• CEMflex VB - active construction joint waterstop - patented coated steel plate waterstop• Quellmax bentonite waterstop tape with rain protection coating• SilverSeal - self-healing, hydrophilic, swelling non-woven - the active membrane• PREDIMAX - premium injection hose system - multiple injectable and cement injectable
8 9
TECHNICAL APPROVALS FOR CONSTRUCTION
APPROVAL
INSPECTION
TESTING
CERTIFICATION
In the unlikely event of damage to the membrane during installation, the smart anti-tracking Fiber-tex fleece of DualProof will prevent any water tracking between the membrane and the concrete.
DualProof has been tested to ASTM D5385 and shows no lateral water migration when tested at 50m hydrostatic water pressure. (University of Nuernberg GER)
The FiberTex Fleece has a positive influence of the water/ cement ratio in the concrete cover zone and improves the quality of the concrete surface on the very best way.
Non water-tracking
DualProof benefits
Permanently bonds to structural concrete
No blinding concrete required
No membrane protection required
Benefits to owners / designers
Benefits to contractors / installers
DualProof - Fresh Concrete Bonding Waterproofing Membrane The transparent membrane allows to assess the concrete quality.
It is possible to examine the concrete finish through the installed membrane after the form-work has been removed.
DualProof will remain in place fully bonded to the structural concrete assuring complete waterproof integrity even if ground settlement or concrete cracks occurs.
Made in Germany High Quality - ISO 9001:2008 TÜV-Süd Germany Dual Proof fulfills DIN EN 13917 - CE Certification
BS 8102:2009 Type A, DIN 18195 T6, SIA 272 Tanking system with the total security
Aging Test completed - German Radon Gas test passed Very good mechanical bonding to the concrete Quality - Technology - Waterproofing - German Engineering
Blinding concrete is preferred, however DualProof can be placed directly on top of a well compacted smooth granular fill substrate. A broadcast of damp sand on top of the granular material is useful. Removal of the blinding concrete means less concrete and less labour time but also means less concrete truck movements which not only saves time and money but is more environment friendly.
DualProof is a robust, heavy duty membrane with many refererences in projects throughout the world.
The structural steel reinforcement is laid directly on top of the membrane ready for the structural concrete placement.
There is no requirement for screed protection which saves valuable time and money.
An ever increasing level of importance is being placed by owners and designers with regards to structural integrity, cost-effectiveness and durability. BPA recognise this, and DualProof with its proven history, excellent holistic cost benefits and independent certification offers an unparalleled system solution for below-ground structures to combat these demands. It provides owners, clients and designers with a high performance system backed by excellent customer/technical service delivered through a comprehensive international network.
DualProof is designed for typical site conditions. It is heavy duty, robust and can be rapidly installed with easy to apply jointing ancillaries which are system-compatible. The system has a long track record, however BPA can offer on-site training assistance for specific projects, delivered through teams of local experts. Contact your BPA office for more details.
10 11
Typical CAD details
Typical site pictures
Case studies and referenceBPA-Technology has been successfully waterproofing many structures across the world since its launch in 1998.
Case studies are available along with project references, please contact your BPAoffice for full details.
12 13
Delivery to siteNormally DualProof is delivered to site shrink wrapped on pallets and will required mechanical equipment for offloading at site.
BPA has de
• Easy
Store DualProof rolls vertically. DualProof needs to be stored in a warehouse.
Material storage
Rolls: 1,20 x 25m, 360m²/palletDimensions: 30m²/roll, 44kg/roll, 12 rolls/palletWeight: 1,470 g/m²,
PVC-membrane 1,2mm thick, 200g/m² PP FiberTex Fleece
...made in GermanyBPA-Technology has been successfully used throughout the world since its launch in 1998.System Engineering based on Quality this is what BPA stands for!.
Production Control, Quality Managament System internal and external according to the DIN EN ISO 9001:2008.
14 15