ducati monster 797/1200 - new rage cycles...ducati monster 797/1200 remove seat unscrew all bolts...
TRANSCRIPT
INSTALLATION INSTRUCTIONS
[email protected] | 914.339.2929
fender eliminator
ducati monster 797/1200
Remove seat
Unscrew all bolts under stock fender / stalk using 4mm allen key (picture 1)
Unplug (3) OEM connectors
Remove (4) bolts underneath to remove fender (picture 2)
With (4) M8 bolts, spacers, and push nuts, mount tail plate to bike. Slide (4) bolts through tail plate; slide white spacers over; and push nuts on top of spacers to secure in place. The belly pan should be sandwiched between the bike and the lens bracket. You have (2) 35mm bolts and (2) 30mm bolts. See picture for proper bolt placement (picture 3)• 797 has (4) 1/2 x 5/16 spacers• 1200 has (2) 7/8 | (2) 5/8 spacers
Plug connectors into OEM harness
Mount your license plate to the tabs on belly pan
Put seat back on bike
1
2
3
4
5
6
7
8
1
2
3