ducting - plastic rectangular 60x204mm flexible air ......ducting - plastic rectangular 60x204mm...
TRANSCRIPT
Due to a policy of continuous development, prices and specifications are subject to change without notice.
16b
15 july 2015 Technical Catalogue See www.smooth-air.co.nz for most recent pricing
Christchurch264 Annex Rd, PO Box 8358
Riccarton 03 343 6184
Wellington18 Armidale St, (PO Box 8358, Chch)
Petone 04 566 7969
Auckland6 Stanway Pl, PO Box 12-243
Penrose 09 579 3257
0800 SMOOTH (0800 766 684)www.smooth-air.co.nz
Smooth-AirR
igid
Duc
t
Continued on next page
Ducting - Plastic Rectangular 60x204mm
VE6601 Flexible Duct BE/BE (can stretch over BE too)
Flexible Duct BE/BEItem # width x height Length Max Temp
VE6601 64x208mm 3m 70°C
20 VENTS. Flexible air ducts for ventilation, air conditioning and heating | Catalogue No. 14 | 03-2011
Description
• Flexible PVC air duct with spiral high-carbon steel wire frame.
Features
• High compression ratio.
• Heavy-flammable, flame-retarding, self-extinguishing.
Recommended application
• Applied in residential and commercial venti-lation systems.
• The ideal solution for ventilation of living quarters and office premises.
Polyvent 660series
White(_)
Cardboardbox
Unit colouredpacking
Net
Flexible PVC film non-insulated air ducts
with steel wire frame (65 μm)
660
Item 660 6601
Range of sizes [mm] Ø 102; 127; 152 110х55; 60х204
Air duct base PVC film (65 μm)
Air duct wire steel spring, 0.8 mm thick
Operating temperature range [°C]
-18...+70
Standard length [m] 1; 1,5; 3; 6 1; 1,5; 3; 6
Available lengths (cutting) [m]
1; 1,5; 2,5; 3; 6; 15; 45 1; 1,5; 3; 6
Air speed [m/s] 30
Maximum operating pressure [Pa]
3000
Technical data
Colour range
Packing
Order code
Polyvent /type
6606601
lengthsize
Accessories
Diffusers and air disk valves Grilles and hoods Fittings ClampsBackdraft dampers
6660
6601
FLEXIBLE AIR DUCTS POLYVENT
VE6601
Item full code VE6601/60*204/3 P
Size 60x204mm
Length 3m
Air duct base PVC film 65 microns
Air duct wire Steel spring 0.8mm thick
Operating temperature range -18°C to +70°C
Air speed 30m/s
Max operating pressure 3000Pa
• Flexible PVC air duct with spiral high-carbon steel wire frame.• High compression ratio• Flame retarding, self-extinguishing• For residential and commercial ventilation systems
Smooth-Air
15 July 2015 Technical Catalogue
Due to a policy of continuous development, prices and specifications are subject to change without notice.
16c
See www.smooth-air.co.nz for most recent pricing
Christchurch264 Annex Rd, PO Box 8358
Riccarton 03 343 6184
Wellington18 Armidale St, (PO Box 8358, Chch)
Petone 04 566 7969
Auckland6 Stanway Pl, PO Box 12-243
Penrose 09 579 3257
0800 SMOOTH (0800 766 684)www.smooth-air.co.nz
Rig
id D
uct
Ducting - Plastic Rectangular 60x204mm
22 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Formation of flat air ductworks.
Design
• Made of white PVC.
• Size: 55x110, 60x122, 60x204 mm.
• Duct length from 350 to 2500 mm.
• Connected with matching connectors.
Flat duct
CodeDimensions [mm]
a b a1 b1 L
50035 55 110 52 107 35070035 60 122 57 119 35080035 60 204 57 200 3505005 55 110 52 107 5007005 60 122 57 119 5008005 60 204 57 200 5005010 55 110 52 107 10007010 60 122 57 119 10008010 60 204 57 200 1000
CodeDimensions [mm]
a b a1 b1 L
5015 55 110 52 107 15007015 60 122 57 119 15008015 60 204 57 200 15005020 55 110 52 107 20007020 60 122 57 119 20008020 60 204 57 200 20005025 55 110 52 107 25007025 60 122 57 119 25008025 60 204 57 200 2500
b
a1
b1
L
a
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Equipped with a backdraft damper for back flow prevention.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Flat duct connector
Flat duct connector with damper
CodeDimensions [mm]
a b a1 b1 c
515 55 110 59 114 66
717 60 122 63 125 69
818 60 204 64 208 91
CodeDimensions [mm]
a b a1 b1 c
5151 55 110 59 114 66
7171 60 122 63 125 70
8181 60 204 64 208 91
c
b1
a
b
a1
c
b1
a
b
a1
22 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Formation of flat air ductworks.
Design
• Made of white PVC.
• Size: 55x110, 60x122, 60x204 mm.
• Duct length from 350 to 2500 mm.
• Connected with matching connectors.
Flat duct
CodeDimensions [mm]
a b a1 b1 L
50035 55 110 52 107 35070035 60 122 57 119 35080035 60 204 57 200 3505005 55 110 52 107 5007005 60 122 57 119 5008005 60 204 57 200 5005010 55 110 52 107 10007010 60 122 57 119 10008010 60 204 57 200 1000
CodeDimensions [mm]
a b a1 b1 L
5015 55 110 52 107 15007015 60 122 57 119 15008015 60 204 57 200 15005020 55 110 52 107 20007020 60 122 57 119 20008020 60 204 57 200 20005025 55 110 52 107 25007025 60 122 57 119 25008025 60 204 57 200 2500
b
a1
b1
L
a
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Equipped with a backdraft damper for back flow prevention.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Flat duct connector
Flat duct connector with damper
CodeDimensions [mm]
a b a1 b1 c
515 55 110 59 114 66
717 60 122 63 125 69
818 60 204 64 208 91
CodeDimensions [mm]
a b a1 b1 c
5151 55 110 59 114 66
7171 60 122 63 125 70
8181 60 204 64 208 91
c
b1
a
b
a1
c
b1
a
b
a1
Flat PVC duct Dimensions (mm)
SE/SE a b a1 b1 L
VE8010 60 204 57 200 1000
VE8015 60 204 57 200 1500
VE8025 60 204 57 200 2500
Flat duct connector Dimensions (mm)
BE/BE a b a1 b1 L
VE818 no back valve 60 204 64 200 91
VE8181 c/w back valve 60 204 64 200 91
23VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat flexible ducts.
Design
• Made of white PVC.
• Cover the connector with air duct and fix it with clamps.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b a1 b1 c
5153 55 110 52 107 60
7173 60 122 57 119 60
8183 60 204 57 200 60
Flexible flat duct connector
b
a1
b1
a
c
Application
• Supply or exhaust ventilation of various premises.
• Connection of single size flat air ducts.
• Decoration of mounting opening and connections to wall.
Design
• Made of white plastic.
• Air ducts are fitted inside the connector.
• Equipped with lock rings for easy adjustment.
• Screw fixing to wall.
• Connecting sizes: 55х110, 60х120, 60х204 mm.
Application
• Supply or exhaust ventilation of various premises.
• Connection of single size flat air ducts.
• Decoration of mounting opening and connections to wall.
Design
• Made of white plastic.
• Air ducts are fitted inside the connector.
• Equipped with lock rings for easy adjustment.
• Equipped with a back valve to prevent back drafting.
• Screw fixing to wall.
• Connecting sizes: 55х110, 60х120, 60х204 mm.
Air duct connector with a plate
Air duct connector with a plate and a
back valve
CodeDimensions [mm]
a b c A B C D L
555 110 55 2 141 154 154 141 131757 120 60 2 141 154 154 141 131858 204 60 3 229 154 242 141 186
CodeDimensions [mm]
a b c A B C D L
5551 110 55 2 141 154 154 141 1317571 120 60 2 141 154 154 141 1318581 204 60 3 229 154 242 141 186
Fittings connector Dimensions (mm)
SE/SE a b a1 b1 L
VE8183 60 204 57 200 60
22 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Formation of flat air ductworks.
Design
• Made of white PVC.
• Size: 55x110, 60x122, 60x204 mm.
• Duct length from 350 to 2500 mm.
• Connected with matching connectors.
Flat duct
CodeDimensions [mm]
a b a1 b1 L
50035 55 110 52 107 35070035 60 122 57 119 35080035 60 204 57 200 3505005 55 110 52 107 5007005 60 122 57 119 5008005 60 204 57 200 5005010 55 110 52 107 10007010 60 122 57 119 10008010 60 204 57 200 1000
CodeDimensions [mm]
a b a1 b1 L
5015 55 110 52 107 15007015 60 122 57 119 15008015 60 204 57 200 15005020 55 110 52 107 20007020 60 122 57 119 20008020 60 204 57 200 20005025 55 110 52 107 25007025 60 122 57 119 25008025 60 204 57 200 2500
b
a1
b1
L
a
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Equipped with a backdraft damper for back flow prevention.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Flat duct connector
Flat duct connector with damper
CodeDimensions [mm]
a b a1 b1 c
515 55 110 59 114 66
717 60 122 63 125 69
818 60 204 64 208 91
CodeDimensions [mm]
a b a1 b1 c
5151 55 110 59 114 66
7171 60 122 63 125 70
8181 60 204 64 208 91
c
b1
a
b
a1
c
b1
a
b
a1
22 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Formation of flat air ductworks.
Design
• Made of white PVC.
• Size: 55x110, 60x122, 60x204 mm.
• Duct length from 350 to 2500 mm.
• Connected with matching connectors.
Flat duct
CodeDimensions [mm]
a b a1 b1 L
50035 55 110 52 107 35070035 60 122 57 119 35080035 60 204 57 200 3505005 55 110 52 107 5007005 60 122 57 119 5008005 60 204 57 200 5005010 55 110 52 107 10007010 60 122 57 119 10008010 60 204 57 200 1000
CodeDimensions [mm]
a b a1 b1 L
5015 55 110 52 107 15007015 60 122 57 119 15008015 60 204 57 200 15005020 55 110 52 107 20007020 60 122 57 119 20008020 60 204 57 200 20005025 55 110 52 107 25007025 60 122 57 119 25008025 60 204 57 200 2500
b
a1
b1
L
a
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Equipped with a backdraft damper for back flow prevention.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Flat duct connector
Flat duct connector with damper
CodeDimensions [mm]
a b a1 b1 c
515 55 110 59 114 66
717 60 122 63 125 69
818 60 204 64 208 91
CodeDimensions [mm]
a b a1 b1 c
5151 55 110 59 114 66
7171 60 122 63 125 70
8181 60 204 64 208 91
c
b1
a
b
a1
c
b1
a
b
a1
23VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat flexible ducts.
Design
• Made of white PVC.
• Cover the connector with air duct and fix it with clamps.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b a1 b1 c
5153 55 110 52 107 60
7173 60 122 57 119 60
8183 60 204 57 200 60
Flexible flat duct connector
ba
1
b1a
c
Application
• Supply or exhaust ventilation of various premises.
• Connection of single size flat air ducts.
• Decoration of mounting opening and connections to wall.
Design
• Made of white plastic.
• Air ducts are fitted inside the connector.
• Equipped with lock rings for easy adjustment.
• Screw fixing to wall.
• Connecting sizes: 55х110, 60х120, 60х204 mm.
Application
• Supply or exhaust ventilation of various premises.
• Connection of single size flat air ducts.
• Decoration of mounting opening and connections to wall.
Design
• Made of white plastic.
• Air ducts are fitted inside the connector.
• Equipped with lock rings for easy adjustment.
• Equipped with a back valve to prevent back drafting.
• Screw fixing to wall.
• Connecting sizes: 55х110, 60х120, 60х204 mm.
Air duct connector with a plate
Air duct connector with a plate and a
back valve
CodeDimensions [mm]
a b c A B C D L
555 110 55 2 141 154 154 141 131757 120 60 2 141 154 154 141 131858 204 60 3 229 154 242 141 186
CodeDimensions [mm]
a b c A B C D L
5551 110 55 2 141 154 154 141 1317571 120 60 2 141 154 154 141 1318581 204 60 3 229 154 242 141 186
22 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Formation of flat air ductworks.
Design
• Made of white PVC.
• Size: 55x110, 60x122, 60x204 mm.
• Duct length from 350 to 2500 mm.
• Connected with matching connectors.
Flat duct
CodeDimensions [mm]
a b a1 b1 L
50035 55 110 52 107 35070035 60 122 57 119 35080035 60 204 57 200 3505005 55 110 52 107 5007005 60 122 57 119 5008005 60 204 57 200 5005010 55 110 52 107 10007010 60 122 57 119 10008010 60 204 57 200 1000
CodeDimensions [mm]
a b a1 b1 L
5015 55 110 52 107 15007015 60 122 57 119 15008015 60 204 57 200 15005020 55 110 52 107 20007020 60 122 57 119 20008020 60 204 57 200 20005025 55 110 52 107 25007025 60 122 57 119 25008025 60 204 57 200 2500
b
a1
b1
L
a
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts.
Design
• Made of white plastic.
• Designed for installation into air duct and equipped with a lock ring for easy jointing.
• Equipped with a backdraft damper for back flow prevention.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Flat duct connector
Flat duct connector with damper
CodeDimensions [mm]
a b a1 b1 c
515 55 110 59 114 66
717 60 122 63 125 69
818 60 204 64 208 91
CodeDimensions [mm]
a b a1 b1 c
5151 55 110 59 114 66
7171 60 122 63 125 70
8181 60 204 64 208 91
c
b1
a
b
a1
c
b1
a
b
a1BE: Big End
SE: Small EndContinued on
next page
24 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Angular connection of flat ducts.
Design
• Made of white plastic.
• Turning point angle from 3° to 48°.
• Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
• On flange side direct connection to flat duct of respective size.
• Connecting section: 55x100 and 60x204 mm.
CodeDimensions [mm]
a b c
52510 190 143 55х110
82810 286 247 60х204
Versatile flat angular connector
a
32
b
c
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° vertically.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° horizontally.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Vertical 90° bend for flat ducts
Horizontal 90° bend for flat ducts
b
a
c
a
c
b
CodeDimensions [mm]
a b c
5252 55x110 89 32
7272 60x120 93 32
8282 60x204 103 42
CodeDimensions [mm]
a b c
5251 55х110 143 32
7271 60х122 155 32
8281 60х204 238 32b
a
c
a
c
b
24 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Angular connection of flat ducts.
Design
• Made of white plastic.
• Turning point angle from 3° to 48°.
• Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
• On flange side direct connection to flat duct of respective size.
• Connecting section: 55x100 and 60x204 mm.
CodeDimensions [mm]
a b c
52510 190 143 55х110
82810 286 247 60х204
Versatile flat angular connector
a
32
b
c
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° vertically.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° horizontally.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Vertical 90° bend for flat ducts
Horizontal 90° bend for flat ducts
b
a
c
a
c
b
CodeDimensions [mm]
a b c
5252 55x110 89 32
7272 60x120 93 32
8282 60x204 103 42
CodeDimensions [mm]
a b c
5251 55х110 143 32
7271 60х122 155 32
8281 60х204 238 32b
a
c
a
c
b
24 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Angular connection of flat ducts.
Design
• Made of white plastic.
• Turning point angle from 3° to 48°.
• Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
• On flange side direct connection to flat duct of respective size.
• Connecting section: 55x100 and 60x204 mm.
CodeDimensions [mm]
a b c
52510 190 143 55х110
82810 286 247 60х204
Versatile flat angular connector
a
32b
c
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° vertically.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° horizontally.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Vertical 90° bend for flat ducts
Horizontal 90° bend for flat ducts
b
a
c
a
c
b
CodeDimensions [mm]
a b c
5252 55x110 89 32
7272 60x120 93 32
8282 60x204 103 42
CodeDimensions [mm]
a b c
5251 55х110 143 32
7271 60х122 155 32
8281 60х204 238 32b
a
c
a
c
b
24 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Angular connection of flat ducts.
Design
• Made of white plastic.
• Turning point angle from 3° to 48°.
• Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
• On flange side direct connection to flat duct of respective size.
• Connecting section: 55x100 and 60x204 mm.
CodeDimensions [mm]
a b c
52510 190 143 55х110
82810 286 247 60х204
Versatile flat angular connector
a
32
b
c
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° vertically.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° horizontally.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Vertical 90° bend for flat ducts
Horizontal 90° bend for flat ducts
b
a
c
a
c
b
CodeDimensions [mm]
a b c
5252 55x110 89 32
7272 60x120 93 32
8282 60x204 103 42
CodeDimensions [mm]
a b c
5251 55х110 143 32
7271 60х122 155 32
8281 60х204 238 32b
a
c
a
c
b
90° horizontal elbow Dimensions (mm)
BE/BE a b c
VE8281 60x204 238 32
90° vertical elbow Dimensions (mm)
BE/BE a b c
VE8282 60x204 103 42
Flat duct connector is Big End/ Big End, it goes over the SE/SE flat duct lengths. VE8181 is equipped with back
draft damper for back flow prevention.
VE8183 is same diameter as the flat PVC duct, it is used to connect Big End fittings together.
BE
SE
SE
BE
BE
Due to a policy of continuous development, prices and specifications are subject to change without notice.
17b
15 july 2015 Technical Catalogue See www.smooth-air.co.nz for most recent pricing
Christchurch264 Annex Rd, PO Box 8358
Riccarton 03 343 6184
Wellington18 Armidale St, (PO Box 8358, Chch)
Petone 04 566 7969
Auckland6 Stanway Pl, PO Box 12-243
Penrose 09 579 3257
0800 SMOOTH (0800 766 684)www.smooth-air.co.nz
Smooth-AirDucting - Plastic Rectangular 60x204mm
24 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Angular connection of flat ducts.
Design
• Made of white plastic.
• Turning point angle from 3° to 48°.
• Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
• On flange side direct connection to flat duct of respective size.
• Connecting section: 55x100 and 60x204 mm.
CodeDimensions [mm]
a b c
52510 190 143 55х110
82810 286 247 60х204
Versatile flat angular connector
a
32
b
c
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° vertically.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° horizontally.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Vertical 90° bend for flat ducts
Horizontal 90° bend for flat ducts
b
a
c
a
c
b
CodeDimensions [mm]
a b c
5252 55x110 89 32
7272 60x120 93 32
8282 60x204 103 42
CodeDimensions [mm]
a b c
5251 55х110 143 32
7271 60х122 155 32
8281 60х204 238 32b
a
c
a
c
b
24 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Angular connection of flat ducts.
Design
• Made of white plastic.
• Turning point angle from 3° to 48°.
• Depending on selected turning angle one connector side is cut out. Connection to the flat duct through matching sized connector.
• On flange side direct connection to flat duct of respective size.
• Connecting section: 55x100 and 60x204 mm.
CodeDimensions [mm]
a b c
52510 190 143 55х110
82810 286 247 60х204
Versatile flat angular connector
a
32
b
c
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° vertically.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Application
• Supply and exhaust ventilation of various premises.
• Connection of same sized flat ducts at 90° horizontally.
Design
• Made of white plastic.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Vertical 90° bend for flat ducts
Horizontal 90° bend for flat ducts
b
a
c
a
c
b
CodeDimensions [mm]
a b c
5252 55x110 89 32
7272 60x120 93 32
8282 60x204 103 42
CodeDimensions [mm]
a b c
5251 55х110 143 32
7271 60х122 155 32
8281 60х204 238 32b
a
c
a
c
b
Multiangle bend Dimensions (mm)
BE/SE a b c
VE82810 286 247 60x204
25VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Mounting of flat ducts to wall, ceiling or any other plane surface.
Design
• Made of white plastic.
• Fixation to plane surface with screws.
• Specially designed configuration provides reliable duct to holder fixation and quick dismantling.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b c
56 114 59 74
76 126 64 86
86 209 65 169
Flat duct holder
a
c
b
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of same sized flat ducts and integration into complex ventilation systems.
Design
• Made of white plastic.
• Connection of same sized three flat ducts at 90°.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
• Direct connection to matching sized ducts.
T-joint for flat ducts
CodeDimensions [mm]
a b с
535 144 174 55х110
737 155 185 60х122
838 248 288 60х204
b
c
c
a
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat and round ducts at 90°.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100, 60x122-100, 60x204-100, 60x204-125, 60x204-150 mm.
• Flat ducts have direct connection and round ducts are connected through a matching connector.
90° connecting bend for flat and round ducts
CodeDimensions [mm]
a D D1 b h L
521 55х110 100 103 58х113 87 138
721 60х122 100 103 63х125 87 140
821 60х204 97 100 64х208 92 140822 60х204 122 125 64х208 92 164823 60х204 147 150 64х208 92 188
D1
D
L
a b
h
25VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Mounting of flat ducts to wall, ceiling or any other plane surface.
Design
• Made of white plastic.
• Fixation to plane surface with screws.
• Specially designed configuration provides reliable duct to holder fixation and quick dismantling.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b c
56 114 59 74
76 126 64 86
86 209 65 169
Flat duct holder
a
c
b
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of same sized flat ducts and integration into complex ventilation systems.
Design
• Made of white plastic.
• Connection of same sized three flat ducts at 90°.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
• Direct connection to matching sized ducts.
T-joint for flat ducts
CodeDimensions [mm]
a b с
535 144 174 55х110
737 155 185 60х122
838 248 288 60х204
b
c
c
a
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat and round ducts at 90°.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100, 60x122-100, 60x204-100, 60x204-125, 60x204-150 mm.
• Flat ducts have direct connection and round ducts are connected through a matching connector.
90° connecting bend for flat and round ducts
CodeDimensions [mm]
a D D1 b h L
521 55х110 100 103 58х113 87 138
721 60х122 100 103 63х125 87 140
821 60х204 97 100 64х208 92 140822 60х204 122 125 64х208 92 164823 60х204 147 150 64х208 92 188
D1
D
L
a b
h
25VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Mounting of flat ducts to wall, ceiling or any other plane surface.
Design
• Made of white plastic.
• Fixation to plane surface with screws.
• Specially designed configuration provides reliable duct to holder fixation and quick dismantling.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b c
56 114 59 74
76 126 64 86
86 209 65 169
Flat duct holder
a
c
b
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of same sized flat ducts and integration into complex ventilation systems.
Design
• Made of white plastic.
• Connection of same sized three flat ducts at 90°.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
• Direct connection to matching sized ducts.
T-joint for flat ducts
CodeDimensions [mm]
a b с
535 144 174 55х110
737 155 185 60х122
838 248 288 60х204
b
c
c
a
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat and round ducts at 90°.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100, 60x122-100, 60x204-100, 60x204-125, 60x204-150 mm.
• Flat ducts have direct connection and round ducts are connected through a matching connector.
90° connecting bend for flat and round ducts
CodeDimensions [mm]
a D D1 b h L
521 55х110 100 103 58х113 87 138
721 60х122 100 103 63х125 87 140
821 60х204 97 100 64х208 92 140822 60х204 122 125 64х208 92 164823 60х204 147 150 64х208 92 188
D1
D
L
a b
h
25VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Mounting of flat ducts to wall, ceiling or any other plane surface.
Design
• Made of white plastic.
• Fixation to plane surface with screws.
• Specially designed configuration provides reliable duct to holder fixation and quick dismantling.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
CodeDimensions [mm]
a b c
56 114 59 74
76 126 64 86
86 209 65 169
Flat duct holder
a
c
b
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of same sized flat ducts and integration into complex ventilation systems.
Design
• Made of white plastic.
• Connection of same sized three flat ducts at 90°.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
• Direct connection to matching sized ducts.
T-joint for flat ducts
CodeDimensions [mm]
a b с
535 144 174 55х110
737 155 185 60х122
838 248 288 60х204
b
c
c
a
c
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat and round ducts at 90°.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100, 60x122-100, 60x204-100, 60x204-125, 60x204-150 mm.
• Flat ducts have direct connection and round ducts are connected through a matching connector.
90° connecting bend for flat and round ducts
CodeDimensions [mm]
a D D1 b h L
521 55х110 100 103 58х113 87 138
721 60х122 100 103 63х125 87 140
821 60х204 97 100 64х208 92 140822 60х204 122 125 64х208 92 164823 60х204 147 150 64х208 92 188
D1
D
L
a b
h
T joint Dimensions (mm)
BE/BE/BE a b c
VE838 248 288 60x204
Flat duct holder Dimensions (mm)
BE a b c
VE86 209 65 169
BE: Big EndSE: Small End
27VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Decoration of supply or exhaust vents of public, residential and industrial ventilation systems.
• Correct air flow distribution in premises.
• Wall or ceiling mounting.
Design
• Made of white plastic.
• Detachable front part facilitates cleaning.
• Modification with an insect screen (s) is available.
• Connecting dimensions: 55x110 and 60x204 mm.
Application
• Decoration of supply or exhaust vents of public, residential and industrial ventilation systems.
• Correct air flow distribution in premises.
• Wall or ceiling mounting.
Design
• Made of white plastic.
• Equipped with a movable flap for air capacity regulation.
• Air pass is regulated with a tilt wand.
• Detachable front part facilitates cleaning.
• Modification with an insect screen (s) is available.
• Matches with 55x110 and 60x204 mm air ducts.
End grille
End grille with air pass regulation
CodeDimensions [mm]
a b c d e f
571 88 137 114 59 73 9
871 93 232 208 64 76 9
CodeDimensions [mm]
a b c d e f
572 88 137 114 59 73 18
872 93 232 208 64 76 18
f
ec
b
a d
f
e
d
c
b
a
Application
• Supply and exhaust ventilation of various premises.
• Flat to round duct connection.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100 mm.
• Direct connection of reducer to round and flat ducts.
Reducer for flat and round ducts
CodeDimensions [mm]
cхb Ø D f а
115 58х114 103 62 32
Dc
a
b
f
27VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Decoration of supply or exhaust vents of public, residential and industrial ventilation systems.
• Correct air flow distribution in premises.
• Wall or ceiling mounting.
Design
• Made of white plastic.
• Detachable front part facilitates cleaning.
• Modification with an insect screen (s) is available.
• Connecting dimensions: 55x110 and 60x204 mm.
Application
• Decoration of supply or exhaust vents of public, residential and industrial ventilation systems.
• Correct air flow distribution in premises.
• Wall or ceiling mounting.
Design
• Made of white plastic.
• Equipped with a movable flap for air capacity regulation.
• Air pass is regulated with a tilt wand.
• Detachable front part facilitates cleaning.
• Modification with an insect screen (s) is available.
• Matches with 55x110 and 60x204 mm air ducts.
End grille
End grille with air pass regulation
CodeDimensions [mm]
a b c d e f
571 88 137 114 59 73 9
871 93 232 208 64 76 9
CodeDimensions [mm]
a b c d e f
572 88 137 114 59 73 18
872 93 232 208 64 76 18
f
ec
b
a d
f
e
d
c
b
a
Application
• Supply and exhaust ventilation of various premises.
• Flat to round duct connection.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100 mm.
• Direct connection of reducer to round and flat ducts.
Reducer for flat and round ducts
CodeDimensions [mm]
cхb Ø D f а
115 58х114 103 62 32
Dc
a
b
f
End grille Dimensions (mm)
BE a b c d e f
VE871 93 232 208 64 76 9
26 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of air ducts to ventilation shafts.
• Decoration of mounting openings.
Design
• Made of white plastic.
• Screw fixing to wall.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Wall plate for flat ducts
CodeDimensions [mm]
a b c d e D E
55 111 56 2 141 141 154 154
75 123 61 2 141 141 154 154
85 205 61 3 229 141 242 154
a
cd
D
bE e
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat different sized ducts.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-60x204 mm.
Reducer for flat ducts
CodeDimensions [mm]
a b c
518 60х204 55х110 30
b
a
cc
T-joint for flat and round ducts
CodeDimensions [mm]
aхb D D1 c d h L
531 55х110 100 103 58 113 87 172
L
d
b
D1
D
a c
h
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of flat and round ducts.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100 mm.
• Direct connection to air duct.
26 VENTS. Flat and round PVC ductworks | Catalog №15 | 06-2013
FLAT PVC DUCTWORK SYSTEM
Application
• Supply and exhaust ventilation of various premises.
• Connection of air ducts to ventilation shafts.
• Decoration of mounting openings.
Design
• Made of white plastic.
• Screw fixing to wall.
• Connecting sizes: 55x100, 60x122, 60x204 mm.
Wall plate for flat ducts
CodeDimensions [mm]
a b c d e D E
55 111 56 2 141 141 154 154
75 123 61 2 141 141 154 154
85 205 61 3 229 141 242 154
a
cd
D
bE e
Application
• Supply and exhaust ventilation of various premises.
• Connection of flat different sized ducts.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-60x204 mm.
Reducer for flat ducts
CodeDimensions [mm]
a b c
518 60х204 55х110 30
b
a
cc
T-joint for flat and round ducts
CodeDimensions [mm]
aхb D D1 c d h L
531 55х110 100 103 58 113 87 172
L
d
b
D1
D
a c
h
Application
• Formation of branch connections in supply or exhaust ventilation systems located in residential, public and other buildings.
• Connection of flat and round ducts.
Design
• Made of white plastic.
• Connecting dimensions: 55x110-100 mm.
• Direct connection to air duct.
Wall plate Dimensions (mm)
BE a b c d e D E
VE85 205 61 3 229 141 242 154
Turning point angle from 3° to 48°.Depending on desired turning angle, one connector side is
cut out. Connection to flat duct through a matching sized connector eg VE818. BE
SE
For mounting of flat ducts to plane surface with screws.
Wall or ceiling mounting.Detachable front for cleaning.
Continued on next page
BE
BE
BE
BE
Rig
id D
uct