duro-last roofing, inc. - ohioduro-last roofing gsa price list effective 3/29/09 table of contents...

DURO-LAST ROOFING, INC.

GSA PRICE LIST GSA CONTRACT GS-07F-5689P

Prices Effective 3/29/2009

WORLD HEADQUARTERS SAGINAW, MICHIGAN

OTHER LOCATIONS JACKSON, MISSISSIPPI GRANTS PASS, OREGON

SIGOURNEY, IOWA

TEL: (800) 248-0280 FAX: (800) 432-9331

EMAIL: [email protected] www.duro-last.com

Duro-Last RoofingGSA Price List Effective 3/29/09

TABLE OF CONTENTS

ITEM PAGEDURO-LAST MEMBRANE 3TWO-WAY ROOF VENTS 3PARAPET WALL VENTS 3

CORNERS 3CONDUIT WASHERS 3

STACK FLASHINGS 4,5STAINLESS STEEL BANDING 5

DRAIN BOOTS 6CDR RINGS 6

DRAIN BOOT ACCESSORIES 6ADHESIVES 7

UNDERLAYMENT 7WALKWAY PADS 7

PLATES 8FASTENERS FOR EDGE DETAILS 8

SCREWDRIVER TIPS 8PRE-ASSEMBLED POLY PLATES W/#14 FASTENERS 8

PRE-ASSEMBLED INSULATION PLATES W/#14 FASTENERS 8#14 SCREWS 9

NAIL TYPE FASTENERS 10CONCRETE SCREWS 10

AUGER FASTENER W/PLATES 11#15 SCREWS 11

DRILL BITS 12TERMINATION BAR 13

FASCIA BAR & VINYL COVERS 13DRIP EDGE 13

GRAVEL STOP 14DRIP EDGE CORNERS 14

GRAVEL STOP CORNERS 14SHINGLE-PLY MEMBRANE 15

SHINGLE-PLY MEMBRANE ACCESSORIES 15CUSTOM MADE CURBS 16

CUSTOM MADE CURBS W/TOPS 17CUSTOM MADE SCUPPERS 17

DURO-LAST ROOFING METAL COLORS 18KYNAR STEEL FASCIA COVER 19

KYNAR STEEL GRAVEL STOP COVER 19VINYL COATED METAL 19

2-PIECE SNAP-ON COMPRESSION METAL 20SNAP-ON FASCIA BASE 21

EDGE EXTENDER 21T-EDGE 21

T-EDGE PLUS 21VINYL COATED DRIP EDGE 22

SNAP COPING 22CANTED COPING 22

FLAT COPING 22D-STYLE GUTTER 23

DX-STYLE GUTTER 24L-STYLE GUTTER 25

LX-STYLE GUTTER 26E-STYLE GUTTER 27

EX-4 STYLE GUTTER 28M-STYLE GUTTER 29

MX-STYLE GUTTER 30DOWNSPOUTS 31

DOWNSPOUT ACCESSORIES 31DROP/OUTLETS 31

A-STYLE ELBOWS 32B-STYLE ELBOWS 32

VINYL COATED METAL SCUPPERS 33VINYL COATED METAL PITCH PANS 34

VINYL COATED METAL SCUPPER W/2" FLANGE 34ANCILLARY SERVICES PRICING - ROOFS OVER 100,000 SQ FT 36 - 42

ANCILLARY SERVICES PRICING - ROOFS UNDER 100,000 SQ FT 43 - 49STATE OF OHIO DAVIS BACON PRICING 51

STATE OF OHIO DAVIS BACON PRICING BY COUNTY 52 - 53

Duro-Last Roofing GSA Price List Effective 3/29/2009

Item No List Price Unit

7% Discount Net Price


40 mil - No Tabs 1004 0.83$ Sq. Ft. 0.78$ 0.76$ 40 mil - 60" Tabs 1004 0.88$ Sq. Ft. 0.82$ 0.81$ 40 mil - 120" Tabs 1004 0.88$ Sq. Ft. 0.82$ 0.81$ 40 mil - 28" Tabs 1004 0.95$ Sq. Ft. 0.89$ 0.87$ 40 mil - Parapets 1004 0.95$ Sq. Ft. 0.89$ 0.87$ 50 mil - No Tabs 1012 0.93$ Sq. Ft. 0.87$ 0.85$ 50 mil - 60" Tabs 1012 0.98$ Sq. Ft. 0.92$ 0.90$ 50 mil - 28" Tabs 1012 1.05$ Sq. Ft. 0.98$ 0.96$ 50 mil - Parapets 1012 1.05$ Sq. Ft. 0.98$ 0.96$ 40 mil - Asphalt Resistant (ARP) 1001 1.02$ Sq. Ft. 0.96$ 0.94$

Two-Way Vents 1231 12.95$ Ea. 12.13$ 11.87$ Two-Way Vent Caps 1230 2.50$ Ea. 2.34$ 2.29$ Snow Diverter 1240 34.55$ Ea. 32.37$ 31.68$

White 1235 15.40$ Ea. 14.43$ 14.12$

6" x 6" - Inside 1311 1.95$ Ea. 1.83$ 1.79$ 6" x 6" - Outside 1312 1.95$ Ea. 1.83$ 1.79$ 6" x 18" - Inside 1313 2.95$ Ea. 2.76$ 2.70$ 6" x 18" - Outside 1314 2.95$ Ea. 2.76$ 2.70$ 18" x 12" - Outside 1309 6.25$ Ea. 5.86$ 5.73$ 6" x 6" - Outside Butterfly 1312 BF 3.90$ Ea. 3.65$ 3.58$

1/2” - Conduit Washer 1338 1.40$ Ea. 1.31$ 1.28$ 3/4” - Conduit Washer 1337 1.40$ Ea. 1.31$ 1.28$ 1” - Conduit Washer 1336 1.40$ Ea. 1.31$ 1.28$

Description

DURO-LAST MEMBRANE (WHITE, GRAY OR TAN)

TWO-WAY ROOF VENTS(Add .47 for Gray & Tan)

PARAPET WALL VENTS(Add .28 for Gray & Tan)

CORNERS(Add .28 for Gray & Tan)(Add .56 for Butterfly Gray & Tan)

CONDUIT WASHERS (White, Tan, and Gray)





1” Closed Only 5.95$ Ea. 5.58$ 5.46$

1-1/2” 1315H Closed 2315H Open 6.95$ Ea. 6.51$ 6.37$

2” 1316 Closed 2316 Open 6.95$ Ea. 6.51$ 6.37$

3” 1317 Closed 2317 Open 6.95$ Ea. 6.51$ 6.37$

4” 1318 Closed 2318 Open 6.95$ Ea. 6.51$ 6.37$

5” 1319 Closed 2319 Open 6.95$ Ea. 6.51$ 6.37$

6” 1320 Closed 2320 Open 6.95$ Ea. 6.51$ 6.37$

7” 1321 Closed 2321 Open 6.95$ Ea. 6.51$ 6.37$

8” 1322 Closed 2322 Open 6.95$ Ea. 6.51$ 6.37$

9” 1323 Closed 2323 Open 8.95$ Ea. 8.39$ 8.21$

10” 1324 Closed 2324 Open 8.95$ Ea. 8.39$ 8.21$

11” 1325 Closed 2325 Open 8.95$ Ea. 8.39$ 8.21$

12” 1326 Closed 2326 Open 10.95$ Ea. 10.26$ 10.04$

13” 1327 Closed 2327 Open 10.95$ Ea. 10.26$ 10.04$

14” 1328 Closed 2328 Open 10.95$ Ea. 10.26$ 10.04$

15” 1329 Closed 2329 Open 10.95$ Ea. 10.26$ 10.04$

Description

STACK FLASHINGS(Add .28 for Gray & Tan)





16” Open Only 21.39$ Ea. 20.04$ 19.61$

18” Open Only 22.41$ Ea. 21.00$ 20.55$

20” Open Only 23.43$ Ea. 21.95$ 21.48$

22” Open Only 24.45$ Ea. 22.91$ 22.42$

24” Open Only 25.47$ Ea. 23.86$ 23.35$

26” Open Only 26.49$ Ea. 24.82$ 24.29$

28” Open Only 29.54$ Ea. 27.68$ 27.08$

30” Open Only 30.56$ Ea. 28.63$ 28.02$

32” Open Only 31.58$ Ea. 29.59$ 28.95$

34” Open Only 32.60$ Ea. 30.55$ 29.89$

36" Open Only 33.62$ Ea. 31.50$ 30.82$

38" Open Only 34.64$ Ea. 32.46$ 31.76$

40" Open Only 35.66$ Ea. 33.41$ 32.69$

42" Open Only 36.68$ Ea. 34.37$ 33.63$

44" Open Only 41.29$ Ea. 38.69$ 37.86$

Panduit - 3/8” x 14” S.S. Bands 1222 25.65$ Bag 24.03$ 23.52$ Pantuit - 3/8” x 20” S.S. Bands 1222P 38.51$ Bag 36.08$ 35.31$

STAINLESS STEEL BANDING

Description

STACK FLASHINGS CONT.(Add .28 for Gray & Tan)

Over 44”, call Sales for pricing





2” 1916 8.95$ Ea. 8.39$ 8.21$ 2 1/2” 1916H 8.95$ Ea. 8.39$ 8.21$ 3” 1917 8.95$ Ea. 8.39$ 8.21$ 3 1/2” 1917H 8.95$ Ea. 8.39$ 8.21$ 4” 1918 8.95$ Ea. 8.39$ 8.21$ 4 1/2” 1918H 8.95$ Ea. 8.39$ 8.21$ 5” 1922 8.95$ Ea. 8.39$ 8.21$ 5 1/2” 1922H 8.95$ Ea. 8.39$ 8.21$ 6” 1921 8.95$ Ea. 8.39$ 8.21$ 6 1/2” 1921H 8.95$ Ea. 8.39$ 8.21$ 7” 1923 8.95$ Ea. 8.39$ 8.21$ 7 1/2” 1923H 8.95$ Ea. 8.39$ 8.21$ 8” 1924 8.95$ Ea. 8.39$ 8.21$

2” 1536 9.61$ Pr. 9.00$ 8.81$ 2 1/2” 1536H 9.86$ Pr. 9.24$ 9.04$ 3” 1537 9.90$ Pr. 9.28$ 9.08$ 3 1/2” 1537H 10.03$ Pr. 9.40$ 9.20$ 4” 1538 10.17$ Pr. 9.53$ 9.32$ 4 1/2” 1538H 10.43$ Pr. 9.77$ 9.56$ 5” 1539 10.86$ Pr. 10.18$ 9.96$ 5 1/2” 1539H 11.38$ Pr. 10.66$ 10.43$ 6” 1540 11.63$ Pr. 10.90$ 10.66$ 6 1/2” 1540H 12.17$ Pr. 11.40$ 11.16$ 7” 1541 12.45$ Pr. 11.67$ 11.41$ 7 1/2” 1541H 15.45$ Pr. 14.48$ 14.16$ 8” 1542 16.85$ Pr. 15.79$ 15.45$

2” - Drain Adapter 1543 8.95$ Ea. 8.39$ 8.21$ 3” and 4” -PVC Drain 1518 38.50$ Ea. 36.07$ 35.30$ 3” to 5” - Black Leaf Grate 1820 8.50$ Ea. 7.96$ 7.79$ 2” to 8” - Dome Strainer (All Colors) 1830 29.66$ Ea. 27.79$ 27.19$

CDR RINGS

DRAIN BOOT ACCESSORIES

Description

DRAIN BOOTS(Add .28 for Gray & Tan)





DL Water Base (5 Gallons) 1118 111.41$ Pail 104.39$ 102.14$ Solvent Base Adhesive (5 Gallons) 1113 117.26$ Pail 109.87$ 107.51$ Duro-Caulk Plus - White 1136 4.10$ Ea. 3.84$ 3.76$ Duro-Caulk Plus - Tan 1137 4.10$ Ea. 3.84$ 3.76$ Duro-Caulk Plus - Gray 1134 4.10$ Ea. 3.84$ 3.76$ Duro-Caulk Plus - Bronze 1135 4.10$ Ea. 3.84$ 3.76$ Strip Mastic 1129 64.16$ Pail 60.12$ 58.82$ Pitch Pocket Filler - Gray 1121 4.68$ Ea. 4.39$ 4.29$ Sure Bond 240 Mastic (5 Gallon Pail) 1123 73.91$ Pail 69.25$ 67.76$

Polyethylene film 20' x 100' 1292 39.00$ Roll 36.54$ 35.76$ Duro Fold Crush Fold 48” x 50’ x 3/8” 1295 38.50$ Bndl. 36.07$ 35.30$ Duro-Fold Cut Fold 48” x 50’ x 3/8” 1295-010 38.50$ Bndl. 36.07$ 35.30$ Ultra Fold TPM 48” x 50’ x 1/2” 1296 39.90$ Bndl. 37.39$ 36.58$ Atlas FR-10 Slipsheet 48” x 250' 1290 117.00$ Roll 109.63$ 107.27$ Atlas FR-50 Slipsheet 48” x 105' 1291 82.17$ Roll 76.99$ 75.34$ Geotextile 12' 6” x 360' 1298 245.60$ Roll 230.12$ 225.17$ Ballast Mat 12' x 100' 1293 144.00$ Roll 134.92$ 132.02$

30” x 60” - White 1080 17.25$ Ea. 16.16$ 15.82$ 60” x 60” - White 1082 31.85$ Ea. 29.84$ 29.20$ 30” x 60” - Tan 1081 17.25$ Ea. 16.16$ 15.82$ 60” x 60” - Tan 1083 31.85$ Ea. 29.84$ 29.20$ 30” x 60” - Gray 1084 17.25$ Ea. 16.16$ 15.82$ 60” x 60” - Gray 1085 31.85$ Ea. 29.84$ 29.20$ 30” x 60” - Safety 1086 17.25$ Ea. 16.16$ 15.82$ 60” x 60” - Safety 1087 31.85$ Ea. 29.84$ 29.20$ 30" x 60" - Safety Fully Skirted* 1356 23.50$ Ea. 22.02$ 21.55$ 30" x 60" - White Fully Skirted * 1355 23.50$ Ea. 22.02$ 21.55$

*Fully Skirted Walkpads have a white skirt on all four sides

UNDERLAYMENT

ROOF TRAC III WALKWAY PADS

Note: Walkway Pads come skirted in white lengthwise

Description

ADHESIVES





2” Round Poly Plates 1305P 82.00$ M 76.83$ 75.18$ 3” Square Steel Plates 1300S 106.00$ M 99.32$ 97.18$ 3” Plastic Insulation Plates 1305I 45.00$ M 42.16$ 41.26$ Cleat Plates 1304 120.00$ M 112.44$ 110.02$

1 5⁄8” Stainless Steel - #12 1243 165.00$ M 154.60$ 151.28$ 1 1⁄4” Hexhead - #14 1444 45.00$ M 42.16$ 41.26$ 1/4” x 1 1/2” Metal Anchor 1241-100 115.00$ Box 107.75$ 105.43$

2” - P3 Style Long 1265 1.50$ Ea. 1.41$ 1.38$ 2” - Squre Drive #3 1264 1.45$ Ea. 1.36$ 1.33$

#12 or #14 - White 1236 35.00$ Bag 32.79$ 32.09$ #12 or #14 - Black 1237 33.00$ Bag 30.92$ 30.26$

2” 1446PA 242.00$ M 226.75$ 221.87$ 3” 1447PA 267.00$ M 250.17$ 244.79$ 4” 1448PA 284.00$ M 266.10$ 260.38$ 5” 1449PA 305.00$ M 285.78$ 279.63$ 6” 1450PA 328.00$ M 307.33$ 300.72$ 7” 1451PA 389.00$ M 364.48$ 356.64$ 8” 1452PA 411.00$ M 385.10$ 376.82$

2” 1446INS 167.00$ M 156.47$ 153.11$ 3” 1447INS 190.00$ M 178.03$ 174.20$ 4” 1448INS 209.00$ M 195.83$ 191.62$ 5” 1449INS 228.00$ M 213.63$ 209.04$ 6” 1450INS 251.00$ M 235.18$ 230.12$ 7” 1451INS 312.00$ M 292.34$ 286.05$ 8” 1452INS 334.00$ M 312.95$ 306.22$

Description

PLATES

FASTENERS FOR EDGE DETAILS

SCREWDRIVER TIPS

PRE-ASSEMBLED INSULATION PLATES W/#14 FASTENERSPrices are per M (M = 1000) Drill Point Tipped Screws Only

SCREW POINT CAPS

PRE-ASSEMBLED POLY PLATES W/#14 FASTENERSPrices are per M (M = 1000) Drill Point Tipped Screws Only





1 1/2” 1442 48.00$ M 44.97$ 44.01$ 2” 1446 56.00$ M 52.47$ 51.34$ 2 1/2” 1456 70.00$ M 65.59$ 64.18$ 3” 1447 76.00$ M 71.21$ 69.68$ 3 1/2” 1457 92.00$ M 86.20$ 84.35$ 4” 1448 99.00$ M 92.76$ 90.77$ 4 1/2” 1458 130.00$ M 121.81$ 119.19$ 5” 1449 146.00$ M 136.80$ 133.86$ 5 1/2” 1459 168.00$ M 157.41$ 154.03$ 6” 1450 176.00$ M 164.91$ 161.36$ 7” 1451 228.00$ M 213.63$ 209.04$ 8” 1452 263.00$ M 246.42$ 241.12$ 9” 1253 362.00$ M 339.18$ 331.89$ 10” 1254 418.00$ M 391.66$ 383.23$ 11” 1255 473.00$ M 443.19$ 433.66$ 12” 1256 509.00$ M 476.92$ 466.66$

1 1/2” 1361 48.00$ M 44.97$ 44.01$ 2” 1362 56.00$ M 52.47$ 51.34$ 2 1/2” 1363 70.00$ M 65.59$ 64.18$ 3” 1364 76.00$ M 71.21$ 69.68$ 3 1/2” 1365 92.00$ M 86.20$ 84.35$ 4” 1366 99.00$ M 92.76$ 90.77$ 4 1/2” 1367 130.00$ M 121.81$ 119.19$ 5” 1368 146.00$ M 136.80$ 133.86$ 5 1/2” 1369 168.00$ M 157.41$ 154.03$ 6” 1370 176.00$ M 164.91$ 161.36$ 7” 1371 228.00$ M 213.63$ 209.04$ 8” 1372 263.00$ M 246.42$ 241.12$ 9” 1373 362.00$ M 339.18$ 331.89$ 10” 1374 418.00$ M 391.66$ 383.23$ 11” 1375 473.00$ M 443.19$ 433.66$ 12” 1376 509.00$ M 476.92$ 466.66$

Steel (18 to 24 ga) Decks / Prices are per M (M = 1000)

Wood Decks / Prices are per M (M = 1000)

#14 SCREWSDrill Point P-3 Head

Description

#14 SCREWSSpade Point P-3 Head





1 1/2” 1620 80.00$ M 74.96$ 73.35$ 2” 1621 100.00$ M 93.70$ 91.68$ 2 1/2” 1622 112.00$ M 104.94$ 102.68$ 3” 1623 122.00$ M 114.31$ 111.85$ 3 1/2” 1624 143.00$ M 133.99$ 131.11$ 4” 1625 163.00$ M 152.73$ 149.44$ 4 1/2” 1626 174.00$ M 163.03$ 159.53$ 5” 1627 192.00$ M 179.90$ 176.03$ 5 1/2" 1619 212.00$ M 198.64$ 194.37$ 6” 1628 232.00$ M 217.38$ 212.70$ 7” 1638 276.00$ M 258.61$ 253.04$ 8” 1639 473.00$ M 443.19$ 433.66$ 9” 1628-009 462.00$ M 432.88$ 423.57$ 10” 1628-010 535.00$ M 501.28$ 490.50$ 11” 1628-011 583.00$ M 546.26$ 534.51$ 12” 1628-012 813.00$ M 761.76$ 745.38$

1 1/4” 1470 45.00$ M 42.16$ 41.26$ 1 3/4” 1471 52.00$ M 48.72$ 47.67$ 2 1/4” 1472 68.00$ M 63.71$ 62.34$ 2 3/4” 1473 73.00$ M 68.40$ 66.93$ 3 1/4” 1474 91.00$ M 85.26$ 83.43$ 3 3/4” 1475 97.00$ M 90.89$ 88.93$ 4 1/4” 1476 113.00$ M 105.88$ 103.60$ 5” 1477 140.00$ M 131.18$ 128.36$ 5 1/2” 1478 158.00$ M 148.04$ 144.86$ 6” 1479 169.00$ M 158.35$ 154.94$ 6 1/2” 1480 192.00$ M 179.90$ 176.03$ 7” 1481 214.00$ M 200.51$ 196.20$ 7 1/2” 1482 243.00$ M 227.68$ 222.79$ 8” 1483 262.00$ M 245.49$ 240.21$ 9” 1484 325.00$ M 304.52$ 297.97$ 10” 1485 374.00$ M 350.43$ 342.89$ 11” 1486 419.00$ M 392.59$ 384.15$ 12” 1487 454.00$ M 425.39$ 416.24$

CONCRETE SCREWS - #14 HI_LOW THREADStructural Concrete - Predrill with 3/16” bit / Prices are per M (M = 1000)

Description

NAIL TYPE FASTENERSStructural Concrete - Predrill with 3/16” bit / Prices are per M (M = 1000)





2” 1751 260.00$ M 243.61$ 238.37$ 2 1/2” 1752 270.00$ M 252.98$ 247.54$ 3” 1753 290.00$ M 271.72$ 265.88$ 3 1/2” 1754 310.00$ M 290.46$ 284.22$ 4” 1755 320.00$ M 299.83$ 293.38$ 4 1/2” 1756 340.00$ M 318.57$ 311.72$ 5” 1757 350.00$ M 327.94$ 320.89$ 5 1/2” 1758 370.00$ M 346.68$ 339.23$ 6” 1759 380.00$ M 356.05$ 348.39$ 6 1/2” 1760 400.00$ M 374.79$ 366.73$ 7” 1761 410.00$ M 384.16$ 375.90$ 7 1/2” 1762 430.00$ M 402.90$ 394.23$ 8” 1763 550.00$ M 515.34$ 504.25$ 8 1/2” 1764 610.00$ M 571.55$ 559.26$ 9” 1765 640.00$ M 599.66$ 586.77$ 10” 1766 730.00$ M 683.99$ 669.28$ 1/4” Auger Bit (Square Drive) 1749 2.50$ Ea. 2.34$ 2.29$ 2” -Additional Auger Plates 1750 95.00$ M 89.01$ 87.10$

2” 1378 88.00$ M 82.45$ 80.68$ 3” 1379 112.00$ M 104.94$ 102.68$ 4” 1380 134.00$ M 125.55$ 122.85$ 5” 1381 189.00$ M 177.09$ 173.28$ 6” 1382 217.00$ M 203.32$ 198.95$ 7” 1383 296.00$ M 277.34$ 271.38$ 8” 1384 333.00$ M 312.01$ 305.30$ 9” 1385 522.00$ M 489.10$ 478.58$ 10” 1386 563.00$ M 527.52$ 516.17$ 11” 1387 582.00$ M 545.32$ 533.59$ 12” 1388 717.00$ M 671.81$ 657.36$ 14” 1257 785.00$ M 735.53$ 719.71$ 16” 1258 866.00$ M 811.42$ 793.97$ 18” 1259 1,110.00$ M 1,040.04$ 1,017.68$ 20” 1260 1,370.00$ M 1,283.66$ 1,256.05$

Wood or Steel Decks / Prices are per M (M = 1000)

Gypsum, Lt. Wt. Concrete - Predrill with 7/16" - 9/16" bit / Prices are per M (M = 1000)

*The purchase price of augers includes the cost of plates

#15 SCREWS

Description

AUGER FASTENER W/ PLATESTectum, Gypsum, and Lt. Wt. Concrete





7⁄32” x 6” - Straight 1631 2.95$ Ea. 2.76$ 2.70$ 7/32” x 12” - Straight 1637 15.42$ Ea. 14.45$ 14.14$ 7/32” x 115/8” - SDS 1644* 13.51$ Ea. 12.66$ 12.39$ 7/32” x 14 1/4” - SDS 1645** 17.32$ Ea. 16.23$ 15.88$ 3⁄16” x 3” - Straight 1632 2.16$ Ea. 2.02$ 1.98$ 3⁄16” x 6” - Straight 1633 2.65$ Ea. 2.48$ 2.43$ 3⁄16” x 6” - TE-CX Bit 1730 9.55$ Ea. 8.95$ 8.76$ 3⁄16” x 6 1⁄2” - SDS 1629 5.25$ Ea. 4.92$ 4.81$ 3⁄16” x 8” - TE-CX Bit 1731 10.60$ Ea. 9.93$ 9.72$ 3⁄16” x 8 1⁄2” - SDS 1635 7.50$ Ea. 7.03$ 6.88$ 3⁄16” x 10” - SDS 1630 10.50$ Ea. 9.84$ 9.63$ 3⁄16” x 12” - Straight 1804 12.75$ Ea. 11.95$ 11.69$ 3/16” x 12” - SDS 1640 11.70$ Ea. 10.96$ 10.73$ 3⁄16” x 12” - TE-CX Bit 1732 11.70$ Ea. 10.96$ 10.73$ 3⁄16” x 16” - TE-CX Bit 1733 12.75$ Ea. 11.95$ 11.69$ 1/4” x 4” - Straight 1266 2.50$ Ea. 2.34$ 2.29$ 1/4” x 4” - TE-CS Bit 1734 10.70$ Ea. 10.03$ 9.81$ 1/4” x 4” - SDS 1268 5.00$ Ea. 4.68$ 4.58$ 1/4” x 6” - TE-CX Bit 1735 11.90$ Ea. 11.15$ 10.91$ 1/4” x 6” - SDS 1643 5.25$ Ea. 4.92$ 4.81$ 1/4” x 8” - TE-CX Bit 1736 13.55$ Ea. 12.70$ 12.42$ 1/4” x 12” - TE-CX Bit 1737 15.20$ Ea. 14.24$ 13.94$ 1/2” x 6” - SDS 1269 10.95$ Ea. 10.26$ 10.04$ 1/2” x 6” - Straight 1271 9.95$ Ea. 9.32$ 9.12$ 1/2” x 10” - SDS 1270 15.50$ Ea. 14.52$ 14.21$ 1/2” x 12” - Straight 1272 17.95$ Ea. 16.82$ 16.46$ 7/16” x 6” - Straight 1267 7.98$ Ea. 7.48$ 7.32$ 7/16” x 6” - SDS 1641 8.15$ Ea. 7.64$ 7.47$ 7/16” x 12” - SDS 1642 11.85$ Ea. 11.10$ 10.86$

Deduct approx. 2" for insertion of bit into tool.

*Use with 8” & 9” concrete nails**Use with 10”, 11” & 12” concrete nails

Description

DRILL BITSAll drill bits are listed by size and total length





Termination Bar - White 1225 0.35$ LF 0.33$ 0.32$ Termination Bar - Tan 1225B 0.44$ LF 0.41$ 0.40$ Termination Bar - Gray 1225G 0.44$ LF 0.41$ 0.40$

1 3/4" Fascia Bar 1568 0.38$ LF 0.36$ 0.35$ 1 3/4" White Vinyl Cover 1569 0.19$ LF 0.18$ 0.17$ 1 3/4" Tan Vinyl Cover 1569B 0.23$ LF 0.22$ 0.21$ 1 3/4" Gray Vinyl Cover 1574 0.23$ LF 0.22$ 0.21$ 1 3/4" Additional White Joint Clips 1570 0.26$ Ea. 0.24$ 0.24$ 1 3/4" Additional Tan Joint Clips 1570B 0.29$ Ea. 0.27$ 0.27$ 1 3/4" Additional Gray Joint Clips 1575 0.29$ Ea. 0.27$ 0.27$ 4" Fascia Bar 1571 0.97$ LF 0.91$ 0.89$ 4" White Vinyl Cover 1572 0.75$ LF 0.70$ 0.69$ 4" Tan Vinyl Cover 1572B 0.87$ LF 0.82$ 0.80$ 4" Gray Vinyl Cover 1578 0.87$ LF 0.82$ 0.80$ 4" Additional White Joint Clips 1573 0.63$ Ea. 0.59$ 0.58$ 4" Additional Tan Joint Clips 1573B 0.76$ Ea. 0.71$ 0.70$ 4" Additional Gray Joint Clips 1579 0.76$ Ea. 0.71$ 0.70$

2” Face - White/White Skirt 1220 1.57$ LF 1.47$ 1.44$ 2” Face - Tan/Tan Skirt 1220B 1.95$ LF 1.83$ 1.79$ 2” Face - Gray/Gray Skirt 1220G 1.95$ LF 1.83$ 1.79$ 4” Face - White/White Skirt 1583 2.00$ LF 1.87$ 1.83$ 4” Face - Tan/Tan Skirt 1583B 2.26$ LF 2.12$ 2.07$ 4” Face - Gray/Gray Skirt 1583G 2.26$ LF 2.12$ 2.07$ 2” Face - Drip Edge Clip White 1228 0.64$ Ea. 0.60$ 0.59$ 2” Face - Drip Edge Clip Tan 1228B 0.72$ Ea. 0.67$ 0.66$ 2” Face - Drip Edge Clip Gray 1228G 0.72$ Ea. 0.67$ 0.66$ 4” Face - Drip Edge Clip White 1584 0.76$ Ea. 0.71$ 0.70$ 4” Face - Drip Edge Clip Tan 1584B 0.80$ Ea. 0.75$ 0.73$ 4” Face - Drip Edge Clip Gray 1584G 0.80$ Ea. 0.75$ 0.73$

(10-Foot Lengths with 6" Skirt)

FASCIA BAR & VINYL COVERS(10-Foot Lengths)

DRIP EDGE

Description

TERMINATION BAR (10-Foot Lengths)





2” Face - White/White Skirt 1226 1.62$ LF 1.52$ 1.49$ 2” Face - Tan/Tan Skirt 1226B 1.95$ LF 1.83$ 1.79$ 2” Face - Gray/Gray Skirt 1226G 1.95$ LF 1.83$ 1.79$ 4” Face - White/White Skirt 1587 1.93$ LF 1.81$ 1.77$ 4” Face - Tan/Tan Skirt 1587B 2.16$ LF 2.02$ 1.98$ 4” Face - Gray/Gray Skirt 1587G 2.16$ LF 2.02$ 1.98$ 2” Face - Gravel Stop Clip White 1613 0.56$ Ea. 0.52$ 0.51$ 2” Face - Gravel Stop Clip Tan 1613B 0.65$ Ea. 0.61$ 0.60$ 2” Face - Gravel Stop Clip Gray 1613G 0.65$ Ea. 0.61$ 0.60$ 4” Face - Gravel Stop Clip White 1588 0.68$ Ea. 0.64$ 0.62$ 4” Face - Gravel Stop Clip Tan 1588B 0.77$ Ea. 0.72$ 0.71$ 4” Face - Gravel Stop Clip Gray 1588G 0.77$ Ea. 0.72$ 0.71$

2” Face - White 1558 5.50$ Ea. 5.15$ 5.04$ 2” Face - Tan 1558B 6.75$ Ea. 6.32$ 6.19$ 2” Face - Gray 1558G 6.75$ Ea. 6.32$ 6.19$ 4” Face - White 1585 6.00$ Ea. 5.62$ 5.50$ 4” Face - Tan 1585B 7.25$ Ea. 6.79$ 6.65$ 4” Face - Gray 1585G 7.25$ Ea. 6.79$ 6.65$

2” Face - White 1614 5.50$ Ea. 5.15$ 5.04$ 2” Face - Tan 1614B 6.75$ Ea. 6.32$ 6.19$ 2” Face - Gray 1614G 6.75$ Ea. 6.32$ 6.19$ 4” Face - White 1589 6.00$ Ea. 5.62$ 5.50$ 4” Face - Tan 1589B 7.25$ Ea. 6.79$ 6.65$ 4” Face - Gray 1589G 7.25$ Ea. 6.79$ 6.65$

DRIP EDGE CORNERS (OUTSIDE ONLY)

GRAVEL STOP CORNERS (OUTSIDE ONLY)

Description

GRAVEL STOP(10-Foot Lengths with 6" Skirt)





Minimum 10-day lead time for Shingle-Ply Material50 mil - Sandstone Tan 1012TN 1.39$ Sq. Ft 1.30$ 1.27$ 50 mil - Slate Gray 1012S 1.39$ Sq. Ft 1.30$ 1.27$

64" x 150' (800 square feet) 1,112.00$ Roll 1,041.92$ 1,019.51$ 64" x 75' (400 square feet) 556.00$ Roll 520.96$ 509.75$ 32" x 150' (800 square feet) 556.00$ Roll 520.96$ 509.75$ 32" x 75' (400 square feet) 278.00$ Roll 260.48$ 254.88$

Two-Way Roof Vents 9969 17.49$ Ea. 16.39$ 16.04$ Parapet Wall Vent 1235TN 20.67$ Ea. 19.37$ 18.95$ 6" x 6" Inside Corners 9971 2.93$ Ea. 2.75$ 2.69$ 6" x 6" Outside Corners 9970 2.93$ Ea. 2.75$ 2.69$ 6" x 18" Inside Corner 9971 4.23$ Ea. 3.96$ 3.88$ 6" x 18" Outside Corner 9970 4.23$ Ea. 3.96$ 3.88$ 18" x 12" Outside Corner 9970 8.52$ Ea. 7.98$ 7.81$ 6" x 6" Outside Butterfly Corner 9970 5.85$ Ea. 5.48$ 5.36$ 1" Stack 9984 8.13$ Ea. 7.62$ 7.45$ 1 1/2" - 8" Stack 9984 9.43$ Ea. 8.84$ 8.65$ 9" - 11" Stack 9984 12.03$ Ea. 11.27$ 11.03$ 12" - 15" Stack 9984 14.63$ Ea. 13.71$ 13.41$ 2" - 8" Drain 9973 8.95$ Ea. 8.39$ 8.21$ Ridge Valley Material 18" x 25' - Sandstone Tan 1030TN 52.13$ Roll 48.84$ 47.79$ Ridge Valley Material 12" x 25' - Sandstone Tan 1030TN 34.75$ Roll 32.56$ 31.86$ Ridge Valley Material 18" x 25' - Slate Gray 1030S 52.13$ Roll 48.84$ 47.79$ Ridge Valley Material 12" x 25' - Slate Gray 1030S 34.75$ Roll 32.56$ 31.86$

Available in the following roll sizes only

SHINGLE-PLY MEMBRANE ACCESSORIES

Description

SHINGLE-PLY MEMBRANEAvailable in Sandstone Tan or Slate Gray No Lap Material Only


6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126

18.37 19.55 20.73 21.90 23.08 24.25 25.42 26.60 27.77 28.94 30.12 31.29 32.47 33.64 34.82 35.99 37.16 38.34 39.51 40.68 41.86

20.73 21.90 23.08 24.25 25.42 26.60 27.77 28.94 30.12 31.29 32.47 33.64 34.82 35.99 37.16 38.34 39.51 40.68 41.86 43.04

23.08 24.25 25.42 26.60 27.77 28.94 30.12 31.29 32.47 33.64 34.82 35.99 37.16 38.34 39.51 40.68 41.86 43.04 44.21

25.42 26.60 27.77 28.94 30.12 31.29 32.47 33.64 34.82 35.99 37.16 38.34 39.51 40.68 41.86 43.04 44.21 45.39

27.77 28.94 30.12 31.29 32.47 33.64 34.82 35.99 37.16 38.34 39.51 40.68 41.86 43.04 44.21 45.39 46.56

30.12 31.29 32.47 33.64 34.82 35.99 37.16 38.34 39.51 40.68 41.86 43.04 44.21 45.39 46.56 47.73

32.47 33.64 34.82 35.99 37.16 38.34 39.51 40.68 41.86 43.04 44.21 45.39 46.56 47.73 48.91

34.82 35.99 37.16 38.34 39.51 40.68 41.86 43.04 44.21 45.39 46.56 47.73 48.91 50.08

37.16 38.34 39.51 40.68 41.86 43.04 44.21 45.39 46.56 47.73 48.91 50.08 51.25

39.51 40.68 41.86 43.04 44.21 45.39 46.56 47.73 48.91 50.08 51.25 52.43

41.86 43.04 44.21 45.39 46.56 47.73 48.91 50.08 51.25 52.43 53.60

44.21 45.39 46.56 47.73 48.91 50.08 51.25 52.43 53.60 54.78

46.56 47.73 48.91 50.08 51.25 52.43 53.60 54.78 55.95

48.91 50.08 51.25 52.43 53.60 54.78 55.95 57.13

51.25 52.43 53.60 54.78 55.95 57.13 58.28

53.60 54.78 55.95 57.13 58.28 59.47

55.95 57.13 58.28 59.47 60.65

58.28 59.47 60.65 61.82

60.65 61.82 62.99

62.99 64.17

65.34

Prices are for open curbs. Add $2.00 for closed curbs.

Unless stated otherwise the height “C; will be 12 inches and the skirt will be 6 inches wide.

120

126

108

114

96

102

84

90

72

78

60

66

48

54

36

42

24

30

12

18

The skirt can also be custom ordered in 6 inch increments for additional cost.

DURO-LAST MEMBRANE CUSTOM MADE CURBS-7% DISCOUNT NET PRICE

(Multiply by .9785 for 9% Discount Net Price)B A

6


6 12 18 24 30 36 42 48 54 60 66 72 78 84 90 96 102 108 114 120 126

37.63 38.77 39.92 41.06 42.20 43.34 44.48 45.62 46.76 47.91 49.05 50.19 51.33 52.47 53.61 54.76 55.90 57.04 58.18 59.32 60.46

40.07 41.39 42.69 43.99 45.29 46.61 47.91 49.21 50.51 51.82 53.13 54.43 55.73 57.04 58.35 59.65 60.95 62.26 63.56 64.87

42.85 44.32 45.79 47.25 48.72 50.19 51.66 53.13 54.59 56.06 57.53 58.99 60.46 61.93 63.40 64.87 66.34 67.80 69.27

45.95 47.58 49.21 50.84 52.47 54.10 55.73 57.36 58.99 60.62 62.26 63.89 65.52 67.15 68.78 70.41 72.04 73.67

49.38 51.17 52.96 54.76 56.55 58.35 60.14 61.93 63.72 65.24 67.31 69.11 70.90 72.69 74.49 76.28 78.08

53.13 55.08 57.04 58.99 60.95 62.91 64.87 66.83 68.78 70.74 72.69 74.65 76.61 78.57 80.52 82.48

57.20 59.32 61.45 63.56 65.68 67.80 69.93 72.04 74.16 76.28 78.41 80.52 82.64 84.76 86.89

61.61 63.89 66.17 68.46 70.74 73.02 75.30 77.59 79.87 82.15 84.44 86.72 89.00 91.29

66.34 68.78 71.23 73.67 76.12 78.10 81.01 83.46 85.90 88.35 90.79 93.24 95.69

71.39 74.00 76.61 79.22 81.83 84.44 87.04 89.66 92.26 94.88 97.48 100.09

B A 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32

4 23.30 24.12 24.93 25.75 26.56 27.38 28.19 29.01 29.82 30.64 31.45 32.27 33.08 33.90 34.71

6 24.93 25.75 26.56 27.38 28.19 29.01 29.82 30.64 31.45 32.27 33.08 33.90 34.71 35.53

8 26.56 27.38 28.19 29.01 29.82 30.64 31.45 32.27 33.08 33.90 34.71 35.53 36.35

10 28.19 29.01 29.82 30.64 31.45 32.27 33.08 33.90 34.71 35.53 36.35 37.16

12 29.82 30.64 31.45 32.27 33.08 33.90 34.71 35.53 36.35 37.16 37.98

14 31.45 32.27 33.08 33.90 34.71 35.53 36.35 37.16 37.98 38.79

16 33.08 33.90 34.71 35.53 36.35 37.16 37.98 38.79 39.61

18 34.71 35.53 36.35 37.16 37.98 38.79 39.61 40.42

20 36.35 37.16 37.98 38.79 39.61 40.42 41.24

22 37.98 38.79 39.61 40.42 41.24 42.05

24 39.61 40.42 41.24 42.05 42.87

26 41.24 42.05 42.87 43.68

28 42.87 43.68 44.50

30 44.50 45.31

32 46.13

B A

6

DURO-LAST MEMBRANE CUSTOM MADE CURBS WITH TOPS – 7% DISCOUNT NET PRICE

(Multiply by .9785 for 9% Discount Net Price)

12

18

24

30

36

42

48

54

60

Use the longest dimension as “A”. The above prices are for the height “C” up to 12 inches and 6 inch skirt.

DURO-LAST MEMBRANE CUSTOM MADE SCUPPERS – 7% DISCOUNT NET PRICE(Multiply by .9785 for 9% Discount Net Price)

The above prices are good for scuppers with distance through the “C” equal to 18 inches or less.


DURO-LAST ROOFING METAL PRODUCTS

Medium Bronze - Cool R Dark Bronze - Cool R Stone White - Cool R Slate Gray - Cool R Sierra Tan - Cool R

Solar White - Cool R Regal White - Cool R Ash Gray - Cool R Sandstone - Cool R Aged Copper - Cool R Patina Green - Cool RHartford Green - Cool R Slate Blue - Cool R Pacific Blue - Cool R Regal Red - Cool R Terra Cotta - Cool RMansard Brown - Cool R Colonial Red - Cool R Matte Black - Cool RGalvalume Plus - High Gloss (not Cool R Rated)

Copper Metallic - Cool RBurgundy - Cool REvergreen - Cool RChampagne Metallic - Cool RSilver Metallic - Cool R

STANDARD COLORS

CUSTOM COLORS

PREMIUM COLORS (ADDITONAL COST)

Note: Unless otherwise stated, all non-stock metal detail will take a minimum of 10 days to manufacture





1-3/4” - Fascia Cover Steel 2537 1.11$ Ft. 1.04$ 1.02$ 1-3/4” - Fascia Cover Steel O.S.Corner 2515 10.48$ Ea. 9.82$ 9.61$ 1-3/4” - Fascia Cover Steel I.S.Corner 2517 10.48$ Ea. 9.82$ 9.61$

4” - Fascia Cover Steel 2543 1.43$ Ft. 1.34$ 1.31$ 4” - Fascia Cover Steel O.S.Corner 2545 11.80$ Ea. 11.06$ 10.82$ 4” - Fascia Cover Steel I.S.Corner 2547 11.80$ Ea. 11.06$ 10.82$

2” - Gravel Stop Cover Steel 2525-001 1.37$ Ft. 1.28$ 1.26$ 2” - Gravel Stop O.S.Corner Steel 2527 11.58$ Ea. 10.85$ 10.62$ 2” - Gravel Stop I.S.Corner Steel 2529 11.58$ Ea. 10.85$ 10.62$

4” - Gravel Stop Cover Steel 2554 1.68$ Ft. 1.57$ 1.54$ 4” - Gravel Stop O.S.Corner Steel 2555 12.83$ Ea. 12.02$ 11.76$ 4” - Gravel Stop I.S.Corner Steel 2556 12.83$ Ea. 12.02$ 11.76$

4' x 10' - White 1603 91.55$ Sheet 85.78$ 83.94$ 4' x 10' - Tan 1603B 91.55$ Sheet 85.78$ 83.94$ 4' x 10' - Gray 1603G 91.55$ Sheet 85.78$ 83.94$

(In stock, available within 5 business days when ordered in standard colors)

VINYL COATED METAL25 sheets per pallet, .023" thick


4” KYNAR STEEL GRAVEL STOP COVER(Snaps on Duro-Last 4” gravel stop)


2” KYNAR STEEL GRAVEL STOP COVER(Snaps on Duro-Last 2” gravel stop)


4” KYNAR STEEL FASCIA COVER(Snaps on Duro-Last 4” fascia bar)

Description

1-3⁄4” KYNAR STEEL FASCIA COVER(Snaps on Duro-Last 1-3⁄4” fascia bar)





3” 2 pc Snap-On Base galvalume plus 2597 0.93$ Ft. 0.87$ 0.85$ 3” 2 pc Snap-On Cover 2598 1.46$ Ft. 1.37$ 1.34$ 3” 2 pc Snap-On Cover O.S. Corner 2298 11.95$ Ea. 11.20$ 10.96$ 3” 2 pc Snap-On Cover I.S. Corner 2299 11.95$ Ea. 11.20$ 10.96$

4” 2 pc Snap-On Base galvalume plus 2600/2600B 1.04$ Ft. 0.97$ 0.95$ 4” 2 pc Snap-On Cover 2600T 1.59$ Ft. 1.49$ 1.46$ 4” 2 pc Snap-On Cover O.S. Corner 2301 12.46$ Ea. 11.67$ 11.42$ 4” 2 pc Snap-On Cover I.S. Corner 2300 12.46$ Ea. 11.67$ 11.42$

5” 2 pc Snap-On Base galvalume plus 2601B 1.15$ Ft. 1.08$ 1.05$ 5” 2 pc Snap-On Cover 2601T 1.75$ Ft. 1.64$ 1.60$ 5” 2 pc Snap-On Cover O.S. Corner 2307 13.13$ Ea. 12.30$ 12.04$ 5” 2 pc Snap-On Cover I.S. Corner 2297 13.13$ Ea. 12.30$ 12.04$

6” 2 pc Snap-On Base galvalume plus 2602/2602B 1.26$ Ft. 1.18$ 1.16$ 6” 2 pc Snap-On Cover 2602T 1.89$ Ft. 1.77$ 1.73$ 6” 2 pc Snap-On Cover O.S. Corner 2303 13.71$ Ea. 12.85$ 12.57$ 6” 2 pc Snap-On Cover I.S. Corner 2302 13.71$ Ea. 12.85$ 12.57$

7” 2 pc Snap-On Base galvalume plus 2603B 1.36$ Ft. 1.27$ 1.25$ 7” 2 pc Snap-On Cover 2603T 2.03$ Ft. 1.90$ 1.86$ 7” 2 pc Snap-On Cover O.S. Corner 2304 14.30$ Ea. 13.40$ 13.11$ 7” 2 pc Snap-On Cover I.S. Corner 2304-001 14.30$ Ea. 13.40$ 13.11$

8” 2 pc Snap-On Base galvalume plus 2604B 1.47$ Ft. 1.38$ 1.35$ 8” 2 pc Snap-On Cover 2604T 2.17$ Ft. 2.03$ 1.99$ 8” 2 pc Snap-On Cover O.S. Corner 2305 14.89$ Ea. 13.95$ 13.65$ 8” 2 pc Snap-On Cover I.S. Corner 2306 14.89$ Ea. 13.95$ 13.65$

Description

3” 2 PIECE SNAP-ON COMPRESSION METAL

4” 2 PIECE SNAP-ON COMPRESSION METAL(In stock, available within 5 business days when ordered in standard colors)




6” 2 PIECE SNAP-ON COMPRESSION METAL(In stock, available within 5 business days when ordered in standard colors)





4” Snap-On Fascia Base* 2600B-400 0.91$ Ft. 0.85$ 0.83$ 5” Snap-On Fascia Base* 2601B-500 1.02$ Ft. 0.96$ 0.94$ 6” Snap-On Fascia Base* 2602B-600 1.13$ Ft. 1.06$ 1.04$ 7” Snap-On Fascia Base* 2603B-700 1.26$ Ft. 1.18$ 1.16$ 8” Snap-On Fascia Base* 2604B-800 1.34$ Ft. 1.26$ 1.23$

3” Edge Extender 2530-003 1.18$ Ft. 1.11$ 1.08$ 4” Edge Extender (Need Cleat) 2530-004 1.32$ Ft. 1.24$ 1.21$ 5” Edge Extender (Need Cleat) 2530-005 1.46$ Ft. 1.37$ 1.34$ 6” Edge Extender (Need Cleat) 2530-006 1.61$ Ft. 1.51$ 1.48$ 7” Edge Extender (Need Cleat) 2530-007 1.75$ Ft. 1.64$ 1.60$ 8” Edge Extender (Need Cleat) 2530-008 1.89$ Ft. 1.77$ 1.73$ 3 1/2” Cleat 2742-001 0.72$ Ft. 0.67$ 0.66$

2” T-Edge 2756-203 4.76$ Ft. 4.46$ 4.36$ 3” T-Edge 2756-206 4.92$ Ft. 4.61$ 4.51$ 4” T-Edge (Need Cleat) 2756-204 5.08$ Ft. 4.76$ 4.66$ 5” T-Edge (Need Cleat) 2756-207 5.25$ Ft. 4.92$ 4.81$ 6” T-Edge (Need Cleat) 2756-205 5.41$ Ft. 5.07$ 4.96$ 3 1/2” Cleat 2742-001 0.72$ Ft. 0.67$ 0.66$ Hook Strip* 2756-220 3.13$ Ft. 2.93$ 2.87$

2” T-Edge Plus 2756-402 5.58$ Ft. 5.23$ 5.12$ 3” T-Edge Plus 2756-403 5.74$ Ft. 5.38$ 5.26$ 4” T-Edge Plus (Need Cleat) 2756-404 5.90$ Ft. 5.53$ 5.41$ 5” T-Edge Plus (Need Cleat) 2756-405 6.06$ Ft. 5.68$ 5.56$ 6” T-Edge Plus (Need Cleat) 2756-406 6.23$ Ft. 5.84$ 5.71$ 3 1/2” Cleat 2742-001 0.72$ Ft. 0.67$ 0.66$ Hook Strip* 2756-220 3.13$ Ft. 2.93$ 2.87$

Description

SNAP-ON FASCIA BASE

*Used with 2 pc snap-on cover

EDGE EXTENDER

T-EDGE

(Price includes hook strip)

*Available in White, Tan, and Gray, can be purchased seperately

(Price includes hook strip)

*Available in White, Tan, and Gray, can be purchased seperately

T-EDGE PLUS





2” Vinyl Coated D/E With Skirt 2529-302 3.23$ Ft. 3.03$ 2.96$ 3” Vinyl Coated D/E With Skirt 2529-003 3.45$ Ft. 3.23$ 3.16$ 4” Vinyl Coated D/E With Skirt (Need Cleat) 2529-204 3.66$ Ft. 3.43$ 3.36$ 5” Vinyl Coated D/E With Skirt (Need Cleat) 2529-006 3.87$ Ft. 3.63$ 3.55$ 6” Vinyl Coated D/E With Skirt (Need Cleat) 2529-107 4.09$ Ft. 3.83$ 3.75$ 3 1/2” Cleat 2742-001 0.72$ Ft. 0.67$ 0.66$

D= 15" - 22" 2740S 8.35$ Ft. 7.82$ 7.66$ D= 22" - 30" 2740S 10.16$ Ft. 9.52$ 9.31$

D= 10" - 15" 2740 5.46$ Ft. 5.12$ 5.01$ D= 15" - 22" 2740 6.51$ Ft. 6.10$ 5.97$ D= 22" - 30" 2740 7.70$ Ft. 7.21$ 7.06$

D= 10" - 15" 2740 5.38$ Ft. 5.04$ 4.93$ D= 15" - 22" 2740 6.42$ Ft. 6.02$ 5.89$ D= 22" - 30" 2740 7.62$ Ft. 7.14$ 6.99$

Pricing based on 24-gauge Galvalume with Kynar 500 standard finish

A (Face) + B (Wall) + C (Back Leg) = D (Stretch Out)D= Over 30" Call Exceptional Metals

Pricing Includes coping, continuous cleat, and splice plate; based on a 4" face.Pricing based on 24-gauge Galvalume with Kynar 500 standard finish

Pricing Includes coping, continuous cleat, and splice plate; based on a 4" face.Pricing based on 24-gauge Galvalume with Kynar 500 standard finish

FLAT COPING

CANTED COPINGA (Face) + B (Wall) + C (Back Leg) = D (Stretch Out)D= Over 30" Call Exceptional Metals

SNAP COPINGA (Face) + B (Wall+3/8) + C (Back Leg) = D (Stretch Out)D= Over 30" Call Exceptional Metals

Pricing Includes coping, cleats, and splice plate.

Description

VINYL COATED DRIP EDGE





D-4 Style Gutter 2745-020 5.22$ Ft. 4.89$ 4.79$ End Cap (Left) 2747-020 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-020 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-020 3.96$ Ea. 3.71$ 3.63$ Inside Miter 2755-021 67.89$ Ea. 63.61$ 62.24$ Outside Miter 2755-022 67.00$ Ea. 62.78$ 61.43$



D-6 STYLE GUTTERRecommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

D-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

Description

D-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets





DX-4 Style Gutter 2745-021 4.54$ Ft. 4.25$ 4.16$ End Cap (Left) 2747-020 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-020 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-020 3.96$ Ea. 3.71$ 3.63$ Inside Miter 2755-023 67.26$ Ea. 63.02$ 61.67$ Outside Miter 2755-024 66.92$ Ea. 62.70$ 61.35$



DX-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets, and Term Bar

Rivets, and Term Bar

Description

DX-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets, Term Bar

DX-6 STYLE GUTTERRecommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant,





L-4 Style Gutter 2745-050 5.32$ Ft. 4.98$ 4.88$ End Cap (Left) 2747-050 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-050 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-050 4.09$ Ea. 3.83$ 3.75$ Inside Miter 2755-051 68.23$ Ea. 63.93$ 62.55$ Outside Miter 2755-052 67.29$ Ea. 63.05$ 61.69$



Description

L-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

L-6 STYLE GUTTER

L-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

Recommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets





LX-4 Style Gutter 2745-051 4.62$ Ft. 4.33$ 4.24$ End Cap (Left) 2747-050 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-050 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-050 4.09$ Ea. 3.83$ 3.75$ Inside Miter 2755-053 67.60$ Ea. 63.34$ 61.98$ Outside Miter 2755-054 66.68$ Ea. 62.48$ 61.13$




Description

LX-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets, Term Bar

LX-6 STYLE GUTTERRecommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant,

LX-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets, and Term Bar





E-4 Style Gutter 2745-080 5.19$ Ft. 4.86$ 4.76$ End Cap (Left) 2747-080 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-080 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-080 4.07$ Ea. 3.81$ 3.73$ Inside Miter 2755-081 67.72$ Ea. 63.45$ 62.09$ Outside Miter 2755-082 66.51$ Ea. 62.32$ 60.98$



Description

E-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

E-6 STYLE GUTTERRecommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

E-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets





EX-4 Style Gutter 2745-081 4.50$ Ft. 4.22$ 4.13$ End Cap (Left) 2747-080 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-080 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-080 4.07$ Ea. 3.81$ 3.73$ Inside Miter 2755-083 67.07$ Ea. 62.84$ 61.49$ Outside Miter 2755-084 65.94$ Ea. 61.78$ 60.46$



and Term Bar

Rivets,and Term Bar

Description

EX-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets, Term Bar

EX-6 STYLE GUTTERRecommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant,

EX-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets,





M-4 Style Gutter 2745-110 5.19$ Ft. 4.86$ 4.76$ End Cap (Left) 2747-110 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-110 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-110 4.09$ Ea. 3.83$ 3.75$ Inside Miter 2755-111 67.78$ Ea. 63.51$ 62.14$ Outside Miter 2755-112 66.61$ Ea. 62.41$ 61.07$



Description

M-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

M-6 STYLE GUTTERRecommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets

M-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets





MX-4 Style Gutter 2745-111 4.50$ Ft. 4.22$ 4.13$ End Cap (Left) 2747-110 14.36$ Ea. 13.45$ 13.17$ End Cap (Right) 2748-110 14.36$ Ea. 13.45$ 13.17$ Splice Plates 2755-110 4.09$ Ea. 3.83$ 3.75$ Inside Miter 2755-113 67.14$ Ea. 62.91$ 61.56$ Outside Miter 2755-114 66.01$ Ea. 61.85$ 60.52$



MX-6 STYLE GUTTERRecommended Accessories: DS-34, DS-44, DS-45 Outlets, Elbows and Downspouts, Gutter Sealant,

and Term Bar


MX-5 STYLE GUTTERRecommended Accessories: DS-34 & DS-44 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets,

Description

MX-4 STYLE GUTTERRecommended Accessories: DS-34 Outlets, Elbows and Downspouts, Gutter Sealant, Rivets, Term Bar





DS-34 - 3" x 4" 2754-034 4.66$ Ft. 4.37$ 4.27$ DS-44 - 4" x 4" 2754-044 4.97$ Ft. 4.66$ 4.56$ DS-45 - 4" x 5" 2754-045 5.12$ Ft. 4.80$ 4.69$ DS-57 - 5" x 7" 2754-057 5.68$ Ft. 5.32$ 5.21$ DS -66 - 6" x 6" 2754-066 5.90$ Ft. 5.53$ 5.41$

DS-34 - 3" x 4" 2750-010 4.30$ Ft. 4.03$ 3.94$ DS-44 - 4" x 4" 2750-020 4.58$ Ft. 4.29$ 4.20$ DS-45 - 4" x 5" 2750-030 4.85$ Ft. 4.54$ 4.45$ DS-57 - 5" x 7" 2750-040 5.66$ Ft. 5.30$ 5.19$ DS -66 - 6" x 6" 2750-061 5.67$ Ft. 5.31$ 5.20$

Downspout Straps 2753 0.76$ Ft. 0.71$ 0.70$ Square to Round Adapters 4" x 4" 2749-200 51.72$ Ea. 48.46$ 47.42$ Rivets - 250/bag 1400-005 25.00$ Bag 23.42$ 22.92$

DS-34 - 3" x 4" 2749-010 10.06$ Ea. 9.43$ 9.22$ DS-44 - 4" x 4" 2749-020 10.13$ Ea. 9.49$ 9.29$ DS-45 - 4" x 5" 2749-030 10.17$ Ea. 9.53$ 9.32$ DS-57 - 5" x 7" 2749-040 10.34$ Ea. 9.69$ 9.48$ DS -66 - 6" x 6" 2749-050 10.34$ Ea. 9.69$ 9.48$

DROP/OUTLETS(Drops will be required to attach gutters to downspouts)

Recommended Accessories: Downspout Straps, Rivets, Elbows, Outlets

MISCELLANEOUS ACCESSORIES

Rivets and downspout straps available in standard and custom colors.

Recommended Accessories: Downspout Straps, Rivets, Elbows, Outlets

CLOSED DOWNSPOUTS(Available in tapered or non-tapered sections. For length longer than 10' contact Exceptional Metals)

Description

OPEN DOWNSPOUTS(Available in non-tapered sections only. For length longer than 10' contact Exceptional Metals)









Style "B" Directs Water Beside the Building

B-STYLE ELBOWS 45°Style "B" Directs Water Beside the Building

B-STYLE ELBOWS 80°

A-STYLE ELBOWS 80°Style "A" Directs Water Away from the Building

Description

A-STYLE ELBOWS 45°Style "A" Directs Water Away from the Building


B A 4 6 8 10 12 14 16 18 20 22 24 26 28 30 324 35.72 37.07 38.40 39.75 41.08 42.43 43.77 45.11 46.45 47.79 49.13 50.47 51.81 52.96 54.116 38.40 39.75 41.08 42.43 43.77 45.11 46.45 47.79 49.13 50.47 51.81 53.15 54.49 55.188 41.09 42.43 43.77 45.11 46.45 47.79 49.13 50.47 51.81 53.15 54.49 55.82 57.16

10 43.77 44.40 46.45 47.79 49.13 50.47 51.81 53.15 54.49 55.82 57.16 53.2512 46.45 47.79 49.13 50.47 51.81 53.15 54.49 55.82 57.16 58.50 59.8514 49.13 50.47 51.81 53.15 54.49 55.82 57.16 58.50 59.85 61.1816 51.81 53.15 54.49 55.82 57.16 58.50 59.85 61.18 62.5318 54.49 55.82 57.16 58.50 59.85 61.18 62.53 63.8620 57.16 58.50 59.85 61.18 62.53 63.86 65.2122 59.85 61.18 62.53 63.86 65.21 66.5424 62.53 63.86 65.21 66.54 67.8926 65.21 66.54 67.89 69.2328 67.89 69.23 70.5730 70.57 71.9132 73.25

B A 4 6 8 10 12 14 16 18 20 22 24 26 28 30 324 52.59 54.56 56.55 58.52 60.51 62.50 64.47 66.46 68.45 70.42 72.41 74.39 76.36 78.35 80.336 56.55 58.52 60.51 62.50 64.47 66.46 68.45 70.42 72.41 74.39 76.33 78.35 80.33 82.318 60.51 62.50 64.47 66.46 68.45 70.42 72.41 74.39 76.33 78.35 80.33 82.31 84.29

10 64.47 66.46 68.45 70.42 72.41 74.39 76.33 78.35 80.33 82.31 84.29 86.2812 68.45 70.42 72.41 74.39 76.33 78.35 80.33 82.31 84.29 86.28 88.2614 72.41 74.39 76.33 78.35 80.33 82.31 84.29 86.28 88.26 90.2416 76.33 78.35 80.33 82.31 84.29 86.28 88.26 90.24 92.2318 80.33 82.31 84.29 86.28 88.26 90.19 92.23 94.2120 84.29 86.28 88.26 90.19 92.23 94.21 96.1922 88.26 90.19 92.23 94.21 96.19 98.1824 92.23 94.21 96.19 98.18 100.1526 96.19 98.13 100.15 102.1428 100.15 102.14 104.1330 104.13 106.1032 108.08

VINYL COATED METAL SCUPPERS – 7% DISCOUNT NET PRICE(Multiply by .9785 for 9% Discount Net Price)

Skirt on one side

*Prices figured at 10” through the wall & with 6” skirt

VINYL COATED METAL SCUPPERS – 7% DISCOUNT NET PRICE(Multiply by .9785 for 9% Discount Net Price)

Skirt two sides

*Prices figured at 10” through the wall & with 6” skirt


B A 4 6 8 10 12 14 16 18 20 22 24 26 28 30 324 37.95 39.51 40.74 42.14 43.53 44.92 46.32 47.71 49.10 50.50 51.89 53.28 54.68 56.07 57.466 40.74 42.14 43.53 44.92 46.32 47.71 49.10 50.50 51.89 53.28 54.68 56.07 57.46 58.868 43.53 44.92 46.32 47.71 49.10 50.50 51.89 53.28 54.68 56.07 57.46 58.86 60.2510 46.32 47.71 49.10 50.50 51.89 53.28 54.68 56.07 57.46 58.86 60.25 61.6412 49.10 50.50 51.89 53.28 54.68 56.07 57.46 58.86 60.25 61.64 63.0414 51.89 53.28 54.68 56.07 57.46 58.86 60.25 61.64 63.04 64.4316 54.68 56.07 57.46 58.86 60.25 61.64 63.04 64.43 65.8218 57.46 58.86 60.25 61.64 63.04 64.43 65.82 67.2220 60.25 61.64 63.04 64.43 65.82 67.22 68.6122 63.04 64.43 65.82 67.22 68.61 70.0024 65.82 67.22 68.61 70.00 71.4026 68.61 70.00 71.40 72.7928 71.40 72.79 74.1830 74.18 75.5832 76.97

B A 4 6 8 10 12 14 16 18 20 22 24 26 28 30 324 55.31 56.89 58.47 60.05 61.63 63.21 64.79 66.37 67.95 69.53 71.11 72.69 74.27 75.85 77.436 58.47 60.05 61.63 63.21 64.79 66.37 67.95 69.53 71.11 72.69 74.27 75.85 77.43 79.018 61.63 63.21 64.79 66.37 67.95 69.53 71.11 72.69 74.27 75.85 77.43 79.01 80.5910 64.79 66.37 67.95 69.53 71.11 72.69 74.27 75.85 77.43 79.01 80.59 82.1712 67.95 69.53 71.11 72.69 74.27 75.85 77.43 79.01 80.59 82.17 83.7514 71.11 72.69 74.27 75.85 77.43 79.01 80.59 82.17 83.75 85.3316 74.27 75.85 77.43 79.01 80.59 82.17 83.75 85.33 86.9118 77.43 79.01 80.59 82.17 83.75 85.33 86.91 88.4920 80.59 82.17 83.75 85.33 86.91 88.49 90.0722 83.75 85.33 86.91 88.49 90.07 91.6424 86.91 88.49 90.07 91.64 93.2226 90.07 91.64 93.22 94.8028 93.22 94.80 96.3830 96.38 97.9632 99.54

(Multiply by .9785 for 9% Discount Net Price)

*Prices figured at 8” high & with 6” skirt

*Prices figured at 8” high & with 6” skirt

VINYL COATED METAL SCUPPER WITH A 2” METAL FLANGE – 7% DISCOUNT NET PRICE

VINYL COATED METAL PITCH PANS – 7% DISCOUNT NET PRICE (Multiply by .9785 for 9% Discount Net Price)


ANCILLARY SERVICES

Duro-Last Roofing, Inc.Services Pricing - Roofs Over 100,000 SFEffective April 1, 2009

LINE ITEM DESCRIPTION SIN PER TOTAL RATEA. A. BASE RATE DESCRIPTION -- ROOFS OVER 100,000 SQUARE FEET

A.1

Install 40-mil white, grey or tan Duro-Last Roofing system, mechanically fastened, reroof with no tear off, Duro-Last recovery board, Duro-Last PVC termination, up to 25 penetrations and 4 walkpads on the entire roof, 60-inch fastening tabs, metal or wood deck 563-4 SF $3.79

A.2

Install 40-mil white, grey or tan Duro-Last Roofing system, mechanically fastened, reroof with no tear off, Duro-Last recovery board, Duro-Last PVC termination, up to 25 penetrations and 4 walkpads on the entire roof, 60-inch fastening tabs, concrete deck 563-4 SF $5.05

A.3

Install 40-mil white, grey or tan Duro-Last Roofing system, mechanically fastened, reroof with no tear off, Duro-Last recovery board, Duro-Last PVC termination, up to 25 penetrations and 4 walkpads on the entire roof, 60-inch fastening tabs, lightweight concrete, tectum, or gypsum deck 563-4 SF $4.80

A.4


A.5


ROOFS OVER 100,000 SQUARE FEET

DURO-LAST OHIO STS ANCILLARY SERVICES PRICES


LINE ITEM DESCRIPTION SIN PER TOTAL RATE



A.6


A.7


A.8


A.9


A.10

Install 40-mil white, grey or tan shingle pattern Duro-Last Roofing system, mechanically fastened, reroof with no tear off, Duro-Last recovery board, Duro-Last PVC termination, up to 25 penetrations and 4 walkpads on the entire roof, 60-inch fastening tabs, metal or wood deck (only available as a mechanically fastened system) 563-4 SF $4.80





B. B. DEMOLITION SERVICESB.1 Tear off and dispose existing roof system, per inch of thickness 563-4 SF $1.16B.2 Remove and dispose rock ballast 563-4 SF $0.42B.3 Remove standard metal roof deck panels 563-4 SF $1.01B.4 Remove wood decking 563-4 SF $0.76B.5 Remove metal edge termination, counterflashing or coping cap 563-4 LF $1.52B.6 Remove metal gutters and downspouts 563-4 LF $1.52B.7 Remove vent pipes, pitch pockets, and wind turbines 563-4 EA $101.07B.8 Remove roof hatch or skylight 563-4 EA $202.14B.9 Remove roof drain, except plumbing 563-4 EA $303.22

C. C. ADDITIONS TO THE BASE RATE -- INSTALL DURO-LAST ROOFING SYSTEMC.1 Install fully adhered system instead of mechanically fastened system, add 563-4 SF $0.66C.2 Install ballasted system instead of mechanically fastened system, add 563-4 SF $0.86C.3 Install 28-inch fastening tabs instead of 60-inch fastening tabs, add 563-4 SF $0.76C.4 Install less than 28-inch fastening tabs instead of 60-inch fastening tabs, add 563-4 SF $1.16C.5 Install Duro-Last system on building over 40-feet high, add 563-4 SF $1.16C.6 Install Duro-Last system on building with a barrel roof, add 563-4 SF $1.01C.7 Install Duro-Last system on building with a pitched roof greater than 4:12, add 563-4 SF $1.42C.8 Install Duro-Last system on building with restricted access environment, add 563-4 SF $2.02C.9 Install Duro-Last system on building in remote area, add 563-4 SF $2.32C.10 Install Duro-Last for special project requirements, add 563-4 SF $3.03C.11 Install fire-rated slipsheets, add 563-4 SF $0.51C.12 Install asphalt resistant product, add 563-4 SF $0.91C.13 Install 5 or more Duro-Last walk pads, add 563-4 EA $15.16C.14 Install 26 or more penetrations, add 563-4 EA $15.16C.15 Install Duro-Last gutter liner, add 563-4 LF $5.05C.16 Install Duro-Last caulk on masonry joints, add 563-4 LF $3.69C.17 Install Duro-Last ice and water shield, add 563-4 LF $1.26





D. D. ADDITIONS TO THE BASE RATE -- INSTALL DURO-LAST METAL PRODUCTSD.1 Install Duro-Last gutters, add 563-4 LF $4.14D.2 Install Duro-Last downspouts, add 563-4 LF $3.54D.3 Install Duro-Last metal coping cap, add 563-4 LF $5.05D.4 Install Duro-Last metal edge termination products, add 563-4 LF $5.05D.5 Install Duro-Last metal counterflashing, add 563-4 LF $3.23

E. E. ADDITIONS TO THE BASE RATE -- INSTALL INSULATION PRODUCTSE.1 Install 4X8 .5-inch wood fiber insulation boards, add 563-4 SF $0.25E.2 Install 4X8 1.0 - 1.5-inch polyisocyanurate flat insulation boards, add 563-4 SF $0.25E.3 Install 4X8 2.0-inch polyisocyanurate flat insulation boards, add 563-4 SF $0.35E.4 Install tapered polyisocyanurate insulation boards, add 563-4 BF $0.66E.5 Install 4X8 1.0 - 1.5-inch EPS flat insulation boards, add 563-4 SF $0.25E.6 Install 4X8 2.0-inch EPS flat insulation boards, add 563-4 SF $0.35E.7 Install tapered EPS insulation boards, add 563-4 BF $0.66E.8 Install EPS flute filler, add 563-4 BF $0.25

F. F. ADDITIONS TO THE BASE RATE -- INSTALL OTHER PRODUCTSF.1 Install 2X4 wood nailers to roof edge, add 563-4 LF $1.01F.2 Install standard metal roof deck replacement panels, add 563-4 SF $2.78F.3 Install wood deck replacement panels, add 563-4 SF $2.53F.4 Install gypsum deck replacement, add 563-4 SF $2.68F.5 Install lightweight concrete deck replacement, add 563-4 SF $3.28F.6 Install tectum deck replacement, add 563-4 SF $3.64F.7 Install new roof hatch (material and labor), add 563-4 EA $1,368.69F.8 Install new skylights (material and labor), add 563-4 EA $973.87F.9 Install new wind turbines (material and labor), add 563-4 EA $1.16F.10 Install new roof drain, excluding plumbing, add 563-4 EA $989.67





G.G. ADDITIONS TO THE BASE RATE -- SUPPLY INSULATION PRODUCTS TO BE INSTALLED WITH THE DURO-LAST ROOFING SYSTEM

G.1 1.0-inch 4X8 polyisocyanurate board - flat 563-4 SF $0.57G.2 1.5-inch 4X8 polyisocyanurate board - flat 563-4 SF $0.62G.3 2.0-inch 4X8 polyisocyanurate board - flat 563-4 SF $0.82G.4 Polyisocyanurate board - tapered 563-4 BF $0.65G.5 1.0-inch 4X8 EPS board - flat 563-4 SF $0.37G.6 2.0-inch 4X8 EPS board - flat 563-4 SF $0.72G.7 EPS board - tapered (per inch thickness) 563-4 SF $0.60G.8 EPS flute filler 563-4 BF $0.26G.9 0.5-inch 4x8 wood fiberboard 563-4 SF $0.84G.10 0.5-inch DensDeck 563-4 SF $0.79

H.H. ADDITIONS TO THE BASE RATE -- SUPPLY ROOF DECKING PRODUCTS TO BE INSTALLED WITH THE DURO-LAST ROOFING SYSTEM

H.1 Metal Decking 563-4 SF $2.32H.2 Wood Decking 563-4 SF $4.53H.3 Lightweight Concrete Decking 563-4 Cubic Yard $1.11H.4 Gypsum Decking 563-4 SF $0.79H.5 Tectum Decking 563-4 SF $6.58

I.I. ADDITIONS TO THE BASE RATE -- SUPPLY OTHER PRODUCTS TO BE INSTALLED WITH THE DURO-LAST ROOFING SYSTEM

I.1 Rock Ballast 563-4 TON $31.59I.2 3/4-Inch OSB 4X8 sheet 563-4 EA $19.74I.3 2X4 wood nailers 563-4 LF $1.05

J.J. ADDITIONS TO THE BASE RATE -- SUPPLY EQUIPMENT RENTALS FOR THE INSTALLATION OF THE DURO-LAST ROOFING SYSTEM

J.1 Crane rental, roof over 40-feet high 563-4 DAY $2,105.68J.2 Lull rental, roof under 40-feet high 563-4 DAY $684.34J.3 Dumpster rental 563-4 DAY $52.64J.4 Port-a-potty rental 563-4 DAY $26.32





KK. ADDITIONS TO THE BASE RATE -- OTHER DURO-LAST SUPPLIED ITEMS AND SERVICES FOR INCLUSION WITH THE DURO-LAST ROOFING SYSTEM

K.1 Duro-Last program administration - total contract value up to $200,000 563-4CONTRACT

VALUE 6%

K.2 Duro-Last program administration - total contract value over $200,000 563-4CONTRACT

VALUE 5%K.3 Bid, performance, or payment bonds, per $1,000 total contract value 563-4 THOUSAND $9.48K.4 Moisture survey/Infrared scanning, 2,500 SF minimum 563-4 SF $0.21K.5 Duro-Last prepaid inspections (2) for Duro-Last 20-year NDL warranty 563.4 TOTAL $1,579.26

K.6Duro-Last leak calls caused by 3rd party damages - 4-hour minimum (excluding Duro-Last material) 563-4 HOUR $63.17

K.7 Duro-Last roof maintenance services (excluding Duro-Last material) 563-4 DAY $789.63K.8 Duro-Last roof inspection services (excluding Duro-Last material) 563-4 DAY $789.63K.9 Additional Duro-Last on-site supervision 563-4 HOUR $78.96K.10 Additional Duro-Last reporting, change order or submittal requirements 563-4 HOUR $52.64





L.L. ADDITIONS TO THE BASE RATE -- DAVIS-BACON WAGE RATE COUNTY MULTIPLIERS

L.1Tier 1 Counties (color-coded green), Davis-Bacon rate of $5.15 to $15.00 per hour, of total demolition and installation line items 563-4 1.0

L.2Tier 2 Counties (color-coded yellow), Davis-Bacon rate of $15.00 to $30.00 per hour, of total demolition and installation line items 563-4 1.5

L.3Tier 3 Counties (color-coded blue), Davis-Bacon rate of $30.00 to $40.00 per hour, of total demolition and installation line items 563-4 2.5

L.4Tier 4 Counties (color-coded pink), Davis-Bacon rate of $40.00 to $58.04 per hour, of total demolition and installation line items 563-4 3.5

L.5Tier 5 Counties (color-coded orange, Alaska/Hawaii), of total demolition and installation line items 563-4 4.0

M. M. ANNUAL SERVICES PRICE ADJUSTMENT, EFFECTIVE 1/1/2009 563-4 Annual 4.5%

Legend:SF - Square FeetLF - Linear FeetBF - Board FootEA - EachCY - Cubic Yard

Duro-Last Roofing, Inc.Services Pricing - Roofs Under 100,000 SFEffective April 1, 2009

LINE ITEM DESCRIPTION SIN PER

TOTAL RATE

A. A. BASE RATE DESCRIPTION -- ROOFS UNDER 100,000 SQUARE FEET

A.1


A.2


A.3

Install 40-mil white, grey or tan Duro-Last Roofing system, mechanically fastened, reroof with no tear off, Duro-Last recovery board, Duro-Last PVC termination, up to 25 penetrations and 4 walkpads on the entire roof, 60-inch fastening tabs, lightweightconcrete, tectum, or gypsum deck 563-4 SF $5.00

A.4


A.5


A.6


ROOFS UNDER 100,000 SQUARE FEET




TOTAL RATE



A.7


A.8


A.9


A.10

Install 40-mil white, grey or tan shingle pattern Duro-Last Roofing system, mechanically fastened, reroof with no tear off, Duro-Last recovery board, Duro-Last PVC termination, up to 25 penetrations and 4 walkpads on the entire roof, 60-inch fastening tabs, metal or wood deck (only available as a mechanically fastened system) 563-4 SF $5.00



TOTAL RATE



B. B. DEMOLITION SERVICESB.1 Tear off and dispose existing roof system, per inch of thickness 563-4 SF $1.21B.2 Remove and dispose rock ballast 563-4 SF $0.42B.3 Remove standard metal roof deck panels 563-4 SF $1.05B.4 Remove wood decking 563-4 SF $0.79B.5 Remove metal edge termination, counterflashing or coping cap 563-4 LF $1.58B.6 Remove metal gutters and downspouts 563-4 LF $1.58B.7 Remove vent pipes, pitch pockets, and wind turbines 563-4 EA $105.28B.8 Remove roof hatch or skylight 563-4 EA $210.57B.9 Remove roof drain, except plumbing 563-4 EA $315.85

C. C. ADDITIONS TO THE BASE RATE -- INSTALL DURO-LAST ROOFING SYSTEMC.1 Install fully adhered system instead of mechanically fastened system, add 563-4 SF $0.68C.2 Install ballasted system instead of mechanically fastened system, add 563-4 SF $0.89C.3 Install 28-inch fastening tabs instead of 60-inch fastening tabs, add 563-4 SF $0.79C.4 Install less than 28-inch fastening tabs instead of 60-inch fastening tabs, add 563-4 SF $1.21C.5 Install Duro-Last system on building over 40-feet high, add 563-4 SF $1.21C.6 Install Duro-Last system on building with a barrel roof, add 563-4 SF $1.05C.7 Install Duro-Last system on building with a pitched roof greater than 4:12, add 563-4 SF $1.47C.8 Install Duro-Last system on building with restricted access environment, add 563-4 SF $2.11C.9 Install Duro-Last system on building in remote area, add 563-4 SF $2.42C.10 Install Duro-Last for special project requirements, add 563-4 SF $3.16C.11 Install fire-rated slipsheets, add 563-4 SF $0.53C.12 Install asphalt resistant product, add 563-4 SF $0.95C.13 Install 5 or more Duro-Last walk pads, add 563-4 EA $15.79C.14 Install 26 or more penetrations, add 563-4 EA $15.79C.15 Install Duro-Last gutter liner, add 563-4 LF $5.26C.16 Install Duro-Last caulk on masonry joints, add 563-4 LF $3.84C.17 Install Duro-Last ice and water shield, add 563-4 LF $1.32



TOTAL RATE



D. D. ADDITIONS TO THE BASE RATE -- INSTALL DURO-LAST METAL PRODUCTSD.1 Install Duro-Last gutters, add 563-4 LF $4.32D.2 Install Duro-Last downspouts, add 563-4 LF $3.68D.3 Install Duro-Last metal coping cap, add 563-4 LF $5.26D.4 Install Duro-Last metal edge termination products, add 563-4 LF $5.26D.5 Install Duro-Last metal counterflashing, add 563-4 LF $3.37

E. E. ADDITIONS TO THE BASE RATE -- INSTALL INSULATION PRODUCTSE.1 Install 4X8 .5-inch wood fiber insulation boards, add 563-4 SF $0.26E.2 Install 4X8 1.0 - 1.5-inch polyisocyanurate flat insulation boards, add 563-4 SF $0.26E.3 Install 4X8 2.0-inch polyisocyanurate flat insulation boards, add 563-4 SF $0.37E.4 Install tapered polyisocyanurate insulation boards, add 563-4 BF $0.68E.5 Install 4X8 1.0 - 1.5-inch EPS flat insulation boards, add 563-4 SF $0.26E.6 Install 4X8 2.0-inch EPS flat insulation boards, add 563-4 SF $0.37E.7 Install tapered EPS insulation boards, add 563-4 BF $0.68E.8 Install EPS flute filler, add 563-4 BF $0.26

F. F. ADDITIONS TO THE BASE RATE -- INSTALL OTHER PRODUCTSF.1 Install 2X4 wood nailers to roof edge, add 563-4 LF $1.05F.2 Install standard metal roof deck replacement panels, add 563-4 SF $2.90F.3 Install wood deck replacement panels, add 563-4 SF $2.63F.4 Install gypsum deck replacement, add 563-4 SF $2.79F.5 Install lightweight concrete deck replacement, add 563-4 SF $3.42F.6 Install tectum deck replacement, add 563-4 SF $3.79F.7 Install new roof hatch (material and labor), add 563-4 EA $1,368.69F.8 Install new skylights (material and labor), add 563-4 EA $973.87F.9 Install new wind turbines (material and labor), add 563-4 EA $1.16F.10 Install new roof drain, excluding plumbing, add 563-4 EA $989.67



TOTAL RATE



G.G. ADDITIONS TO THE BASE RATE -- SUPPLY INSULATION PRODUCTS TO BE INSTALLED WITH THE DURO-LAST ROOFING SYSTEM

G.1 1.0-inch 4X8 polyisocyanurate board - flat 563-4 SF $0.57G.2 1.5-inch 4X8 polyisocyanurate board - flat 563-4 SF $0.62G.3 2.0-inch 4X8 polyisocyanurate board - flat 563-4 SF $0.82G.4 Polyisocyanurate board - tapered 563-4 BF $0.65G.5 1.0-inch 4X8 EPS board - flat 563-4 SF $0.37G.6 2.0-inch 4X8 EPS board - flat 563-4 SF $0.72G.7 EPS board - tapered (per inch thickness) 563-4 SF $0.60G.8 EPS flute filler 563-4 BF $0.26G.9 0.5-inch 4x8 wood fiberboard 563-4 SF $0.84G.10 0.5-inch DensDeck 563-4 SF $0.79

H.H. ADDITIONS TO THE BASE RATE -- SUPPLY ROOF DECKING PRODUCTS TO BE INSTALLED WITH THE DURO-LAST ROOFING SYSTEM

H.1 Metal Decking 563-4 SF $2.32H.2 Wood Decking 563-4 SF $4.53H.3 Lightweight Concrete Decking 563-4 CY $1.11H.4 Gypsum Decking 563-4 SF $0.79H.5 Tectum Decking 563-4 SF $6.58

I.I. ADDITIONS TO THE BASE RATE -- SUPPLY OTHER PRODUCTS TO BE INSTALLED WITH THE DURO-LAST ROOFING SYSTEM

I.1 Rock Ballast 563-4 TON $31.59I.2 3/4-Inch OSB 4X8 sheet 563-4 EA $19.74I.3 2X4 wood nailers 563-4 LF $1.05

J.J. ADDITIONS TO THE BASE RATE -- SUPPLY EQUIPMENT RENTALS FOR THE INSTALLATION OF THE DURO-LAST ROOFING SYSTEM

J.1 Crane rental, roof over 40-feet high 563-4 DAY $2,105.68J.2 Lull rental, roof under 40-feet high 563-4 DAY $684.34J.3 Dumpster rental 563-4 DAY $52.64J.4 Port-a-potty rental 563-4 DAY $26.32



TOTAL RATE



K.K. ADDITIONS TO THE BASE RATE -- OTHER DURO-LAST SUPPLIED ITEMS AND SERVICES FOR INCLUSION WITH THE DURO-LAST ROOFING SYSTEM

K.1 Duro-Last program administration - total contract value up to $200,000 563-4CONTRACT

VALUE 6%

K.2 Duro-Last program administration - total contract value over $200,000 563-4CONTRACT

VALUE 5%K.3 Bid, performance, or payment bonds, per $1,000 total contract value 563-4 THOUSAND $9.48K.4 Moisture survey/Infrared scanning, 2,500 SF minimum 563-4 SF $0.21K.5 Duro-Last prepaid inspections (2) for Duro-Last 20-year NDL warranty 563.4 TOTAL $1,579.26

K.6Duro-Last leak calls caused by 3rd party damages - 4-hour minimum (excluding Duro-Last material) 563-4 HOUR $63.17

K.7 Duro-Last roof maintenance services (excluding Duro-Last material) 563-4 DAY $789.63K.8 Duro-Last roof inspection services (excluding Duro-Last material) 563-4 DAY $789.63K.9 Additional Duro-Last on-site supervision 563-4 HOUR $78.96K.10 Additional Duro-Last reporting, change order, or submittal requirements 563-4 HOUR $52.64



TOTAL RATE



L.L. ADDITIONS TO THE BASE RATE -- DAVIS-BACON WAGE RATE COUNTY MULTIPLIERS

L.1Tier 1 Counties (color-coded green), Davis-Bacon rate of $5.15 to $15.00 per hour, of total demolition and installation line items 563-4 1.0

L.2Tier 2 Counties (color-coded yellow), Davis-Bacon rate of $15.00 to $30.00 per hour, of total demolition and installation line items 563-4 1.5

L.3Tier 3 Counties (color-coded blue), Davis-Bacon rate of $30.00 to $40.00 per hour, of total demolition and installation line items 563-4 2.5

L.4Tier 4 Counties (color-coded pink), Davis-Bacon rate of $40.00 to $58.04 per hour, of total demolition and installation line items 563-4 3.5

L.5Tier 5 Counties (color-coded orange, Alaska/Hawaii), of total demolition and installation line items 563-4 4.0

M. M. ANNUAL SERVICES PRICE ADJUSTMENT, EFFECTIVE 1/1/2009 563-4 Annual 4.5%

Legend:SF - Square FeetLF - Linear FeetBF - Board FootEA - EachCY - Cubic Yard


DAVIS BACON PRICING

Duro-Last Roofing, Inc.Davis Bacon PricingEffective April 1, 2009

STATE Tier 1 Rates Tier 2 Rates Tier 3 Rates Tier 4 Rates Tier 5 Rates$ 5.15 - $15.00 $15.00 - $30.00 $30.00 - $40.00 $40.00 - $58.04 (Market Conditions)

MULTIPLIER RATE 1.0 1.5 2.5 3.5 4.0

OHIO Darke County ← Athens County ← Entire State ExceptMercer County Carroll CountyPaulding County Champaign CountyPutnam County Clark CountyVan Wert County Clinton County

Defiance CountyFulton CountyGallia CountyGreene CountyHardin CountyHenry CountyHighland CountyLawrence CountyLogan CountyLorain CountyMarion CountyMedina CountyMeigs CountyMiami CountyMontgomery CountyPreble CountyShelby CountyUnion CountyWilliams County

GSA PRICING TIERS BY STATE AND COUNTY

DAVIS BACON RATES BY COUNTY (ROOFER) ------ OHIO

GSA Pricing: Tier 1 and Tier 2 and Tier 3 MULTIPLIER

RATE 1.0 1.5 2.5

FRINGE BENEFIT HOURLY RATE RATE TOTAL RATE METRO AREA

Adams County Ohio 23.70$ 8.76$ 32.46$ Allen County Ohio 24.37$ 11.27$ 35.64$ Ashland County Ohio 21.90$ 8.74$ 30.64$ Ashtabula County Ohio 25.75$ 13.10$ 38.85$ Athens County Ohio 17.07$ -$ 17.07$ Auglaize County Ohio 22.16$ 8.90$ 31.06$ Belmont County Ohio 23.27$ 9.00$ 32.27$ Brown County Ohio 24.12$ 7.62$ 31.74$ CincinnatiButler County Ohio 24.12$ 7.62$ 31.74$ CincinnatiCarroll County Ohio 21.48$ 7.93$ 29.41$ Champaign County Ohio 18.25$ 5.90$ 24.15$ Clark County Ohio 20.35$ 7.36$ 27.71$ Clermont County Ohio 24.12$ 7.62$ 31.74$ CincinnatiClinton County Ohio 20.35$ 7.36$ 27.71$ Columbiana CountyOhio 20.29$ 11.19$ 31.48$ Coshocton County Ohio 21.90$ 8.74$ 30.64$ Crawford County Ohio 21.90$ 8.74$ 30.64$ Cuyahoga County Ohio 25.75$ 13.10$ 38.85$ ClevelandDarke County Ohio 13.33$ -$ 13.33$ Defiance County Ohio 21.48$ 7.93$ 29.41$ Delaware County Ohio 22.16$ 8.90$ 31.06$ ColumbusErie County Ohio 25.75$ 13.10$ 38.85$ Fairfield County Ohio 22.16$ 8.90$ 31.06$ ColumbusFayette County Ohio 22.16$ 8.90$ 31.06$ Franklin County Ohio 22.16$ 8.90$ 31.06$ ColumbusFulton County Ohio 21.48$ 7.93$ 29.41$ ToledoGallia County Ohio 17.07$ -$ 17.07$ Geauga County Ohio 25.75$ 13.10$ 38.85$ ClevelandGreene County Ohio 20.35$ 7.36$ 27.71$ DaytonGuernsey County Ohio 22.19$ 7.98$ 30.17$ Hamilton County Ohio 24.12$ 7.62$ 31.74$ CincinnatiHancock County Ohio 24.37$ 11.27$ 35.64$ Hardin County Ohio 18.25$ 5.90$ 24.15$ Harrison County Ohio 23.27$ 9.00$ 32.27$ Henry County Ohio 21.48$ 7.93$ 29.41$ Highland County Ohio 20.35$ 7.36$ 27.71$ Hocking County Ohio 22.16$ 8.90$ 31.06$ Holmes County Ohio 21.90$ 8.74$ 30.64$ Huron County Ohio 21.90$ 8.74$ 30.64$ Jackson County Ohio 23.70$ 8.76$ 32.46$ Jefferson County Ohio 23.27$ 9.00$ 32.27$ Knox County Ohio 22.16$ 8.90$ 31.06$ Lake County Ohio 25.75$ 13.10$ 38.85$ ClevelandLawrence County Ohio 17.07$ -$ 17.07$ Licking County Ohio 22.16$ 8.90$ 31.06$ ColumbusLogan County Ohio 18.25$ 5.90$ 24.15$ Lorain County Ohio 16.75$ 4.06$ 20.81$ ClevelandLucas County Ohio 24.37$ 11.27$ 35.64$ ToledoMadison County Ohio 22.16$ 8.90$ 31.06$ ColumbusMahoning County Ohio 20.29$ 11.19$ 31.48$ YoungstownMarion County Ohio 21.48$ 7.93$ 29.41$ Medina County Ohio 21.48$ 7.93$ 29.41$ ClevelandMeigs County Ohio 17.07$ -$ 17.07$ Mercer County Ohio 13.33$ -$ 13.33$ Miami County Ohio 20.35$ 7.36$ 27.71$ Dayton

DAVIS BACON RATES BY COUNTY (ROOFER) ------ OHIO

GSA Pricing: Tier 1 and Tier 2 and Tier 3 MULTIPLIER

RATE 1.0 1.5 2.5

FRINGE BENEFIT HOURLY RATE RATE TOTAL RATE METRO AREA

Monroe County Ohio 23.27$ 9.00$ 32.27$ Montgomery Count Ohio 20.35$ 7.36$ 27.71$ DaytonMorgan County Ohio 22.19$ 7.98$ 30.17$ Morrow County Ohio 22.16$ 8.90$ 31.06$ ColumbusMuskingum County Ohio 22.19$ 7.98$ 30.17$ Noble County Ohio 22.19$ 7.98$ 30.17$ Ottawa County Ohio 25.75$ 13.10$ 38.85$ ToledoPaulding County Ohio 13.33$ -$ 13.33$ Perry County Ohio 22.16$ 8.90$ 31.06$ Pickaway County Ohio 22.16$ 8.90$ 31.06$ ColumbusPike County Ohio 23.70$ 8.76$ 32.46$ Portage County Ohio 21.90$ 8.74$ 30.64$ AkronPreble County Ohio 20.35$ 7.36$ 27.71$ DaytonPutnam County Ohio 13.33$ -$ 13.33$ Richland County Ohio 21.90$ 8.74$ 30.64$ Ross County Ohio 22.16$ 8.90$ 31.06$ Sandusky County Ohio 25.75$ 13.10$ 38.85$ Scioto County Ohio 23.70$ 8.76$ 32.46$ Seneca County Ohio 21.90$ 8.74$ 30.64$ Shelby County Ohio 18.25$ 5.90$ 24.15$ Stark County Ohio 21.90$ 8.74$ 30.64$ Summit County Ohio 21.90$ 8.74$ 30.64$ AkronTrumbull County Ohio 20.29$ 11.19$ 31.48$ YoungstownTuscarawas CountyOhio 21.90$ 8.74$ 30.64$ Union County Ohio 18.25$ 5.90$ 24.15$ ColumbusVan Wert County Ohio 13.33$ -$ 13.33$ Vinton County Ohio 23.70$ 8.76$ 32.46$ Warren County Ohio 24.12$ 7.62$ 31.74$ CincinnatiWashington CountyOhio 22.19$ 7.98$ 30.17$ Wayne County Ohio 21.90$ 8.74$ 30.64$ Williams County Ohio 21.48$ 7.93$ 29.41$ Wood County Ohio 24.37$ 11.27$ 35.64$ ToledoWyandot County Ohio 22.16$ 8.90$ 31.06$

Grey shaded counties do not have Davis-Bacon rates for roofers, and use the state average instead

duro-last roofing, inc. - ohioduro-last roofing gsa price list effective 3/29/09 table of contents...

Documents