dv59 led - underwater lights usa · warranty. should your led light and/or matching driver box...

Application for: Floating docks, pilings, marinas, waterside restaurants and houses

––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––

Light Source:

High density LED arrayWhite, blue, green, red or color changing

––––––––––––––––––––––––––––––––––––––––––––––

Light Construction: Marine bronzeStainless Steel fasteners

––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––Driver Box Construction: Gray molded fiberglass polyester

Driver: 100 – 277VAC 50/60Hz2.0 – 0.68 Amps input range150W output

Installation:

———————————————————————

NOTE: All information is subject to change without prior notice, please confirm details prior to ordering.

A

Fastened to a flat surface by way of a mounting bracket or lay flat on bottom

DV59LED technical specif ications

DV59 LED

Glass Lens: Clear borosilicate0.19” / 48mm4.2” / 106mm

15,000

L

Lumens:

ife Length: Approx. 30,000 hours––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––

––––––––––––––––––––––––––––––––––––––––––––––

Light Dimensions: 5.9” (150mm) diameter x 1.4” (35mm) deep

Driver Box Dimensions:

11.5” (292mm) long x 9.3” (235mm) wide x 5.2” (132mm) deep

Thickness:Diameter:

3406 SW 26th Terrace, C-6/7, Fort Lauderdale, FL 33312 USA T. 954 760 4447 Toll Free 1 866 772 0130 F. 954 525 3261 [email protected] www.seavision.com

purpose built robust underwater

LED dock light designed to

withstand the saltwater or freshwater

environment. This marine dock light

manufactured in aluminum bronze

incorporates the latest LED high density

chip technology with a borosilicate

marine grade glass lens and GFCI

protection. The underwater dock light

can be mounted horizontally on any

structure or simply placed on the sea,

lake or pond bottom. Available in white,

blue, green, red or color changing RGB.

The driver box can be ordered with an

attached photo cell for automatic

switching at dusk. There is also an

optional mounting bracket available that

can be used to attach the dock light to

fixed structures.

Introduction:Congratulations on the purchase of your new LED dock light with matching driver box. Underwater Lights® USA, LLC takes pride inproviding well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. This LEDlight can be installed on your dock for aesthetics, to attract fish and/or for security and safety.General Information (LED Light):The latest commercial grade “COB” High-Density Light Emitting Diode (LED) technology used in this light will provide robust andreliable operation under normal operating conditions when used with the matching driver box.Internal thermal limit protection included. Note: Optimum performance and longevity will be achieved when operating underwater.This light is intended for underwater lighting applications.Depending upon water clarity conditions, the light beam can reach up to 30 meters (100 feet).General Information (Driver Box):Includes the latest control technology and electronic component construction to guarantee high levels of performance.Universal VAC input with short circuit, over current, over voltage and over temperature protections.Electrical cable attached GFCI male plug and electrical wiring terminal block with VAC input fuse protection.Safety Information:Always disconnect and lock-out power before working on the LED light.Always ensure that VAC power is disconnected and locked out before performing driver box installation and/or service.Never operate without GFCI protection at power source.Care and Maintenance:Marine growth should be regularly removed from the LED light lense using a soft brush to allow clear illumination from the light.Clear antifouling coating can be applied to aid with reducing marine growth (ie: SeaClear®).The matching driver box should be opened and visually inspected every six months.LED light and matching driver box electrical cabling should be visually inspected for proper operating condition every six months.Technical Specifications:Light source = Instant-on high flux, high density LED array - 14,630 maximum Lumens and 7000 Kelvin color temperature in White- Available in Blue, Green, Red or RGB changing LED array’s - Approx 15,000 hours lifeLense = Clear borosilicate glass - 4.8mm (0.19”) thick - 106mm (4.2”) diameter net apertureLight dimensions = 150mm (5.9”) diameter x 35mm (1.4”) long - 2936 grams (6.5 lbs)Light construction = Marine bronze - Stainless steel fastenersDriver box dimensions = 292mm (11.5”) long x 235mm (9.3”) wide x 132mm (5.2”) deep - 2127 grams (4.7 pounds)Driver box construction = Gray molded fiberglass polyester with polyurethane gasket, IP66/NEMA 4X ratedDriver = 100-277VAC, 50/60 Hz, 2.0-0.68 Ampere input range - 150 Watt outputCable to driver box = Marine grade electrical cable, 16/3 stranded copper wireCable from driver box to LED light = Marine grade electrical cable, 16/2 stranded copper wireTerminal block fuse = Fast blow 10 Amp cylindrical, 6.3mm diameter x 25mm or 32mm long (0.25” diameter x 1.0” or 1.25” long)Troubleshooting:Please contact our technical support staff in Florida at 1-954-760-4447, Monday to Friday from 8:00 am to 5:00 pm EST.Warranty:Underwater Lights® USA, LLC warrants this LED light and matching driver box to be free from defects in workmanship andmaterials for a period of two years from the date of original purchase. Further, misuse, abuse, improper installation, neglect,improper shipping, damage caused by disasters such as fire, flood and lightning, unauthorized repair or modifications will void saidwarranty. Should your LED light and/or matching driver box prove defective during the warranty period, promptly contactUnderwater Lights® USA, LLC for an RMA number and then return the LED light and/or matching driver box freight prepaid with theRMA number clearly marked on the outside of the shipping container.

DV59 LED Light

Underwater Lights Europe Sarl16, rue Rouaze

06400 Cannes, FrancePhone: 33-(0)-4-97-21-02-96

Fax: 33-(0)-4-97-21-10-96Internet: www.seavision.com

Underwater Lights USA, LLC 3406 SW 26th Terrace, C-6/7 Fort Lauderdale, FL 33312 USA Phone: 1-954-760-4447Fax: 1-954-525-3261 Internet: www.seavision.com Email: [email protected] DOC:021113-4 Email: [email protected]

120-230VAC

Installation:

Ensure that the LED light will be submerged at low tide (if applicable), then select a flat mounting surface for the light and secureby way of two Main Body (1) M8 x 1.25 x 9mm deep threaded holes or simply lay on bottom facing up. Note: An optionalmounting bar is also available. Caution! Route LED light electrical cable away from any sharp edges/surfaces.

Preferably, the matching driver box should be mounted in a cool, dry, well ventilated and easily accessible location. Attach thedriver box to a fixed bulkhead or similar secure structure using four appropriate M8 fasteners, leaving adequate space betweenadjacent driver boxes for proper cooling. Note: Whereas the driver box can be placed in any orientation, it is recommended thatthe cable strain relief connectors face down. Insert the provided GFCI male plug into a standard 120V/15A wall outlet.

Serviceable Parts (LED Light):

The LED light is factory rebuildable only. For all servicing call and request an RMA number and return the LED light to the US officefor repair and/or rebuilding.

Serviceable Parts (Driver Box):

Upon opening the driver box by unscrewing four captive lid fasteners, replacement of Driver (12) or Fused Terminal Block (14) isaccomplished by removal and replacement of associated fasteners and wiring (see diagram below). Further, a 10 Amp Fast BlowFuse (16) located in the Fused Terminal Block (14) may be pulled out and replaced as required. Caution! Ensure that VACpower is disconnected and locked out before servicing driver box.

MODEL 13C15B39B67B99 LED LIGHT WITH DRIVER BOX

BALLOON PART DESCRIPTION

1 59001 MAIN BODY, BRONZE*

2 59006 FRONT FLANGE, BRONZE*

3 59012 LENSE

4 59013 WIRE PULL HANDLE

5 59020 LED ARRAY*

6 59011 GLASS GASKET

7 59026 M8 x 1.25 x 20 LG SST HEX BOLT

8 59028 CABLE STRAIN RELIEF

9 59029 ELECTRICAL CABLE

10 59030 ENCLOSURE

11 59031 MOUNTING PLATE

12 59032 DRIVER

13 59036 M4 x 0.7 x 6LG SST PHILLIPS PAN HEAD SCREW

14 59033 FUSED TERMINAL BLOCK

15 59037 M3.5 x 0.6 x 12LG PPHS

16 59034 FAST BLOW FUSE

17 59035 CABLE STRAIN RELIEF

18 59043 GFCI MALE PLUG*

19 59039 ELECTRICAL CABLE

*PLEASE CALL FOR OTHER PRODUCT COMPONENT CONFIGURATIONS





DV59 LED Light120-230VAC

English:

All drawings of general management, design detail and invention are the property of Underwater Lights USA, LLC and

may be used solely for work contracted or by express written permission of Underwater Lights USA, LLC. This applies

to first hand use and material on loan to others. Any infringement may be liable to penalty and/or compensation

without regard to the question of guilt. All drawings are subject to detail development during the course of

construction, and all rights of reproduction are reserved. Any information provided by Underwater Lights USA, LLC in

either hard copy or electronic format may be subject to change/s without prior purchaser, customer or end user

notice.

French:

Tous les dessins, détails généraux, de conception et d’invention sont la propriété de Underwater Lights USA, LLC et ne

peuvent être utilisés que pour des travaux sous contrat ou avec l’autorisation écrite expresse de Underwater Lights

USA, LLC. Ceci s'applique à la fois à la première utilisation et au matériel emprunté ou visualisé par des tiers. Toute

infraction peut faire l’objet de sanctions et / ou d’une indemnisation sans qu'il soit nécessaire d'établir la preuve de

culpabilité. Tous les dessins font l’objet de développements détaillés pendant la construction et tous les droits de

reproduction sont réservés. Les informations fournies par Underwater Lights USA, LLC, en version papier ou

électronique, peuvent être sujettes à modification(s) sans notification préalable à l'acheteur, au client ou à l'utilisateur

final.

I talian:

Tutti i disegni, generali, dettagli di progettazione e di invenzione sono di proprietà della Underwater Lights USA, LLC e

possono essere utilizzati esclusivamente per il lavoro contratto o mediante espressa autorizzazione scritta della

Underwater Lights USA, LLC. Ciò vale sia per la prima utilizzazione sia per il materiale in prestito o visione a terzi.

Qualsiasi infrazione può essere soggetta a sanzioni e/o indennizzi senza considerare la questione del senso di colpa.

Tutti i disegni sono soggetti a sviluppo dettagliato durante la costruzione e sono riservati tutti i diritti di riproduzione.

Le informazioni fornite dalla Underwater Lights USA, LLC, in copia cartacea o elettronica, possono essere soggette a

modifica/modifiche senza preavviso all'acquirente, al cliente o all'utente finale.

Spanish:

Todos los dibujos, detalles de diseño y creación son propiedad de Underwater Lights USA, LLC y pueden ser utilizados

únicamente para trabajos relacionados o a través de autorización escrita de Underwater Lights USA, LLC. Esto aplica a

utilizarlos de primera mano o a material prestado a otros. Cualquier violación de estos términos puede ser penalizada

y/o una compensación puede ser requerida sin cuestionar la culpabilidad. Todos los dibujos están sujetos a ser

desarrollados en detalle durante el transcurso de la construcción y todos los derechos de reproducción son reservados.

Toda la información proporcionada por Underwater Lights USA, LLC tanto en forma impresa como digital está sujeta a

cambios en cualquier momento sin notificarle al comprador, cliente o usuario final.

IMPORTANT NOTICE!





dv59 led - underwater lights usa · warranty. should your led light and/or matching driver box...

Documents