dynaset catalogue us spa

60
PRODUCT CATALOGUE 2014 REACH the NEW HEIGHT of PRODUCTIVITY

Upload: dynaset-oy

Post on 11-Mar-2016

292 views

Category:

Documents


8 download

DESCRIPTION

 

TRANSCRIPT

Page 1: Dynaset catalogue us spa

PRODUCT CATALOGUE2014

REACH the NEW

HEIGHT of PRODUCTIVITY

Page 2: Dynaset catalogue us spa

PRODUCT CATALOGUE POWERED BY HYDRAULICS

HG

HWG

HMG

HPW

HK

DYNASET - IMPULSADOS POR LA HIDRÁULICA

DYNASET es la clave multiuso para el poder hidráulico existente, una notable hazaña de ingeniería que abre un mundo de posibilidades y le permite a usted ser más productivo y eficiente de una manera sencilla, compacta y fácil. – DYNASET es la solución inovadora hacia un mundo mejor de maquinarias .

• COMPACTO: La mejor relación poder-tamaño del mundo – fácilinstalación a bordo y siempre pórtatil.

• CONFIABLE: La hidráulica también ofrece poder hasta en las más duras condiciones – por su alta calidad en diseño y manufactura, seleccionados proveedores y partes garantizan una alta calidaden los productos DYNASET. Todas las unidades con examinadasantes de salir de la fábrica.

• POTENTE: Extremadamente alto poder en un pequeño tamaño,sin motores adicionales – cero emisiones.

• PRODUCTIVIDAD: Rápida recuperación de la inversión, bajo man-tenimiento – convierta el tiempo en dinero y genere más.

FUENTE DE ENERGIA DISPONIBLE DIRECTAMENTE DE LA MAqUINARIA DE TRABAJO – la confiabilidad de la hidráulica garantiza un trabajo efi-ciente en todo momento, en cualquier lugar que usted trabaje.

Motor Sistema Hidráulico Poder para el equipo de DYNASET Salida: electricidad, agua a alta presión, aire comprimido, imán, vibración, etc. Maquinaria Base

DYNASET - POWERED BY HYDRAULICS

Engine Hydraulics system Input for DYNASET transformer Output: electricity, high pressure water, compressed air, magnet, vibration etc. Base machine

DYNASET is the key for multipurpose of existing hydraulic power, a remarkable engineering feat that can open up a world of possibilities and allow you to be far more productive and efficient with simplicity, more compact and ease. – DYNASET innovative solution towards a new better world of machinery. • COMPACT: Best power-to-size ratio in the World – easiest on-board

installation or portable, always with you.• RELIABLE: Hydraulics offer power also in toughest conditions –

highest quality in design and manufacturing, selected subcontrac-tors and parts guarantee high quality of DYNASET products. All units are tested before leaving from the factory.

• POWERFUL: Extremely lot of power in small size, no extra engine– zero emission.

• PRODUCTIVITY: Quick return on investment, less maintenance –turn time into money and make more.

SOURCE OF ENERGY DIRECTLY AVAILABLE FROM THE WORKING MACHINE – reliability of hydraulics guarantee efficient working at anytime, anywhere you are working.

Page 3: Dynaset catalogue us spa

6 PRODUCT CATALOGUE

Powerful productivity with compact hydraulic equipment.

DYNASET is the leading manufacturer of hydraulicgenerators, -power washers, and -compressors in the

world. The DYNAmic Finnish manufacturer, founded in 1986, with innovative SET of hydraulic equipment that are reliable, compact, powerful and easy to use.

The powered by hydraulics DYNASET products produce electricity, high pressure water, compressed air, etc. for hundreds applications in fields of construction, mining, demolition, recycling, service, installation and maintenance, environment, forestry, agriculture, transportation, shipping, airport, rental, fire fighting, defence, infrastructure, oil field, offshore, process industry, etc. as a solution towards a new better world of machinery.

Hydraulic system of a work machine is power source that DYNASET expands for added productivity and work efficiency simply and in compact size without extra engines. Zero emission DYNASET transforms the hydraulic power into electricity, high pressure water, compressed air, magnetism, vibration, etc. with a simple connection of two hoses: pressure and tank.

DYNASET operates with the reliability of hydraulics without separate fuel or additional maintenance turning time into money for excavators, loaders, tractors, trucks, platform lifts, crushers, harvesters, mining machines, concrete trucks, cleaning vehicles, fire engines, rescue and service vehicles, ships, on railways, in industry, etc.

World’s best power-to-weight ratio guarantees easiest on-board installation on all work machines.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Productividad poderosa con un equipo hidráulico compacto

Dynaset es el principal fabricante de generadores hidráulicos, potentes lavadores y compresores del mundo. El fabricante finlandés DYNAmico, fundado en 1986, con un innovador conjunto de equipos hidráulicos que son fiables, compactos, potentes y fáciles de usar.

Los productos de DYNASET, impulsados por la hidráulica, producen electricidad, agua a alta presión, aire comprimido, etc. para cientos de aplicaciones en los campos de la construcción, la minería, demolición, reciclaje, servicio, instalación y mantenimiento, el medio ambiente, la silvicultura, la agricultura, el transporte, el transporte marítimo, aeropuertos, alquiler, extinción de incendios, defensa, infraestructura, campo petrolífero, alta mar, industria de procesos, etc. como una solución a un nuevo y mejor mundo de maquinarias.

El sistema hidráulico de una máquina de trabajo es fuente de energía que Dynaset expande para una mayor productividad y eficiencia en el trabajo; simple y en un tamaño compacto, sin motores adicionales. Con una emisión nula, Dynaset transforma la energía hidráulica en energía eléctrica, agua a alta presión, aire comprimido, magnetismo, vibración, etc., con una simple conexión de dos mangueras: la de presión y la del tanque.

Dynaset opera con la fiabilidad del sistema hidráulico sin combustible aparte o mantenimiento adicional, convirtiendo tiempo en dinero, para excavadoras, palas cargadoras, tractores, camiones, elevadores de plataforma, trituradoras, segadoras, maquinaria de minería, hormigoneras, vehículos de limpieza, camiones de bomberos, vehículos de rescate y de servicio, barcos, ferrocarriles, en la industria, etc.

La mejor relación potencia-peso del mundo garantiza la fácil instalación a bordo en todas las máquinas de trabajo.

Page 4: Dynaset catalogue us spa

PRODUCT CATALOGUE 5

7

8

10

12

14

15

16

17

HG

HGV

HWG

HMG

MAG

HMAG

HGG

ACC

HPW

KPL

PPL

HPW-DUST

HPW-FIRE

HDF

JPL

HSP

ACC

HK/HKL/HKR

ACC

HHK

HV/HVY

HPT

HVB/HVD

HVO

VAL

DATA

20

21

23

25

27

29

31

32

34

38

39

42

43

44

45

46

48

50

DYNASET - BLUE HYDRAULICSELECTRICITYHydraulic Generator

Variable Hydraulic Generator

Hydraulic Welding Generator

Hydraulic Magnet Generator

Lifting Magnet

Hydraulic Magnet

Hydraulic Ground Power Generator

Accessories

HIGH PRESSURE WATERHydraulic Power Washer

High Pressure Street Washing Unit

High Pressure Pipe Cleaning Unit

High Pressure Dust Suppression System

High Pressure Fire Fighting System

Hydraulic Drilling Fluid Pump

High Pressure Waste Bin Washing Robot

Hydraulic Submersible Pump

Accessories

COMPRESSED AIRHydraulic Compressor

Accessories

HYDRAULIC KNOW-HOWHydraulic Grinder

Hydraulic Winch

Hydraulic Power Unit Technology

Hydraulic Vibra Units

Hydraulic Power Take Off

Installation Valves

Installation Data

ELECTRICIDADGenerador hidráulico

Generador hidráulico variable

Máquina de soldar hidráulica

Generador hidráulico para imán

Imanes de elevación

Imán hidráulico

Generador hidráulico de potencia en tierra

Accesorios

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

AGUA A ALTA PRESIÓNBomba hidráulica de agua a alta presión

Unidad hidráulica para lavado de calles a alta presión

Unidad hidráulica para limpieza de tuberías a alta presión

Sistema hidráulico de supresión de polvo a alta presión

Sistema hidráulico para extinción de incendios a alta presión

Bomba hidráulica de fluido para perforaciones

Robot hidráulico para lavado de tanques de basura a alta presión

Bomba hidráulica sumergible

Accesorios

AIRE COMPRIMIDOCompresor hidráulico: de pistón y de paletas

Accesorios

CONOCIMIENTO TÉCNICO DE HIDRÁULICAEsmeriladora Hidráulica

Malacate hidráulico

Unidad hidráulica de potencia

Bomba hidráulica vibratoria

Tomas de potencia (PTO) hidráulicas

Válvulas de instalación

Datos de la instalación

Page 5: Dynaset catalogue us spa

PRODUCT CATALOGUE 3

HGHGV

HWGHMG

HMAG

HPWKPLPPL

HPW-DUSTHPW-FIRE

HEUHDF

HPWJPL

HSP

HK/HKL/HKR

VALHVOHHKHRU

HV/HVYHPU

12345

12345

6789

101112131415

6789

101112131415

16 16

171819202122

171819202122

ELECTRICITYHydraulic Generator

Variable Hydraulic Generator

Hydraulic Welder

Hydraulic Magnet Generator

Hydraulic Magnet

HIGH PRESSURE WATERHydraulic Power Washer

High Pressure Street Washing Unit

High Pressure Pipe Cleaning Unit

High Pressure Dust Suppression System

High Pressure Fire Fighting System

Hydraulic High Pressure Rock Bolting Unit

Hydraulic Drilling Fluid Pump

Water Cutting Power Pack

High Pressure Waste Bin Washing Robot

Hydraulic Submersible Pump

COMPRESSED AIRHydraulic Compressor

HYDRAULIC KNOW-HOWInstallation Valves

Pre-installed Hydraulic System

Hydraulic Grinder

Hydraulic Rescue Tool Power Pack.

Hydraulic Winch

Hydraulic Power Pack

ELETTRICITÀ Generatore idraulico

Generatore idraulico variabile

Saldatrice idraulica

Generatore idraulico a magneti

Magnete idraulico

ACQUA AD ALTA PRESSIONEPompa idraulica di acqua ad alta pressione

Unità di lavaggio stradale ad alta pressione

Unità per la pulizia di tubature ad alta pressione

Sistema per l’abbattimento delle polveri ad alta pressione

Sistema antincendio ad alta pressione

Unità idraulica per l’ancoraggio alle rocce ad alta pressione

Pompa idraulica di liquido di perforazione

Gruppo di alimentazione per taglio ad acqua

Robot per il lavaggio di contenitori per rifiuti ad alta pressione

Pompa idraulica a immersione

ARIA COMPRESSA Compressore idraulico

CONOSCENZE TECNICHE DI IDRAULICAValvole di installazione

Sistema idraulico preinstallato

Rettificatrice idraulica

Gruppo di alimentazione idraulica per utensili di soccorso

Verricello idraulico

Gruppo di alimentazione idraulica

Page 6: Dynaset catalogue us spa

1

2

3

3

3

3

4

6

6

9

9

9

11

12

15

16

16

16

16

16

17

19

6

Page 7: Dynaset catalogue us spa

1

1

1

1

2

1

5

6

6

7

7

8

10

10

13

14

16

17

17

16

1820

21

22

Page 8: Dynaset catalogue us spa

PRODUCT CATALOGUE 7

INFO ELECTRICITY

The most convenient and cost-effective way to do various tasks rely on availability of electricity in all conditions. DYNASET

offers high quality electricity powered by hydraulics anywhere, anytime for all worksite needs – even for boats, ships or ground power for airplanes.

Dynaset HG generates high quality electricity in power range 3,5 – 200kVA for all AC-powered tools, lights, heating, cooling, welding, 1 or 3 phase motors etc. Dynaset hydraulics regulates exact 50 or 60Hz by automatic frequency control. Automatic voltage control main tains steady voltage of 115, 230 and 400V for any electric load. Dynaset complete power station is less than half the size of traditional engine generator, silent, reliable and it runs without extra engine, fuel and maintenance in excavators, platform lifts, trucks, service vehicles, fire engines, mining machines, ships, etc.

Hydraulic welder HWG is the world’s lightest welder for machinery. Dynaset HWG welds and repairs pipelines, steel constructions, wearing parts, etc easily on work site.

Hydraulic magnet generator HMG is a complete power source to lifting magnets handling scrap metal, steel, casting, slag, etc. The magnet generator works in the original hydraulic system on all material handling excavators, cranes, trucks ets.

DYNASET HG unit is service free and installed to the working machine. It doesn’t take any space or require special user attention like traditional engine-generators.

La manera más conveniente y rentable para hacer varias tareas que dependan de la disponibilidad de energía eléctrica en

todas las condiciones. DYNASET ofrece electricidad de primera calidad desde la hidráulica donde sea, en cualquier momento para todas las necesidades de lugares de trabajo – incluso para botes, barcos y fuentes de poder en tierra para aviones.

La unidad HG de Dynaset genera electricidad de alta calidad en un rango de potencia de 3,5-200 kVA para todas las herramientas de CA, luces, calentadores, enfriadores, soldadura, motores monofásicos y trifásicos, etc. La hidráulica de Dynaset regula exactamente a 50 o 60 Hz por un control automático de frecuencia. El control automático de voltaje mantiene el voltaje constante de 115, 230 y 400 V con cualquier carga eléctrica. La estación de poder de Dynaset es menos de la mitad del tamaño de los accesorios tradicionales, silencioso, confiable y funciona sin motores adicionales, combustible y mantenimiento en excavadoras, elevadores de plataforma, camiones, vehículos de servicio, camiones de bomberos, maquinaria para minería, barcos, etc.

La máquina de soldar hidráulica HWG es la más liviana y compacta máquina de soldar para maquinarias en el mundo. Con la HWG de Dynaset, suelda y repara tuberías, elementos de acero, partes desgastas, etc. fácilmente en el sitio de trabajo.

El generador para imán hidráulico HMG es una completa fuente de alimentación para imanes que manejan chatarra, aceros, fundiciones, escoria, etc.

La unidad HG de DYNASET es sin mantenimiento e instalada a la maquinaria de trabajo. No toma espacio alguno ni necesita de atención especial del usuario como los generadores tradicionales.

ELECTRICIDAD

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 9: Dynaset catalogue us spa

8 PRODUCT CATALOGUE

HG HYDRAULIC GENERATOR

High power, high quality electricity always available at work site:

BASE MACHINES: Excavators, platform lifts, trucks, cranes, service vehicles, fire engines, mining machines, ships, power packs, etc.

APPLICATIONS: Powering of electric tools, lights, heaters/coolers, welding generators, 1- and 3-phase motors, etc.

FEATURES: Compact size, easy installation, silent operation, with no extra engine or fuel. Complete power station with overload protection, safety leakage relay and 3- or 5-pin sockets. Auxiliary fuse /socket box available.

GENERADOR HIDRÁULICO

Alta potencia, electricidad de alta calidad siempre disponible en el sitio de trabajo:

MÁQUINAS BASE: Excavadoras, elevadores de plataforma, camiones, grúas, vehículos de servicio, camiones de bomberos, maquinaría de minería, barcos, fuentes de alimentación, etc.

APLICACIONES: Alimentación de herramientas eléctricas, luces, calentadores/enfriadores, generadores para soldar, motores monofásicos y trifásicos, etc.

CARACTERÍSTICAS: Tamaño compacto, fácil instalación, funcionamiento silencioso, sin motores o combustibles extra. Central eléctrica completa con protección de sobrecarga, interruptor diferencial de seguridad y enchufes de 3 o 5 pines. Disponible fusible auxiliar / caja de tomacorrientes.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 10: Dynaset catalogue us spa

PRODUCT CATALOGUE 9

HG 3,5 HG 6,5 HG 12 HG 20

HG 3,7 HG 6X

HG 5,1 HG 20,1 HG 30,1HG 15,1

HG3,5S-E230SE23-17-VF 3,5 3,5/1,0 2 - 7.5 x 16.5 x 8.9 57 5.3 3 000

HG5S-E230SE23-24-VF 5 5,0/1,0 2 - 7.5 x 18.3 x 8.9 64 6.9 3 000

HG6,5E-E400ST23-33-VF 6,5 5,2/0,8 2 1 8.3 x 19.1 x 13.4 93 9.5 3 000

HG10E-E400ST23-48-VF 10 8,0/0,8 2 1 8.5 x 19.7 x 13.4 115 13.5 3 000

HG12T-E400ST23-57-K 12 9,6/0,8 2 1+1 10.6 x 21.3 x 315 125 16.1 3 000

HG15H-E400SS23-66-VF 15 12/0,8 2 1+1 13 x 32.9 x 17.5 264 18 3 000

HG20H-E400SS23-92-VF 20 16/0,8 2 1+1 11 x 33.1 x 15.6 264 25.1 3 000

HG20H-E400SS23-60-VF 20 16/0,8 2 1+1 11 x 33.1 x 15.6 264 16.1 6000

HG30I-E400SS23-120-K 30 24/0,8 16.9 x 44.1 x 20.1 425 35 3 000

HG30I-E400SS23-90-K 30 24/0,8 16.9 x 44.1 x 20.1 425 24.6 6 000

HG40C-E400SS23-90-K 40 32/0,8 16.9 x 44.1 x 20.3 436 24.6 6 000

HG40C-E400SS23-165-K 40 32/0,8 16.9 x 44.1 x 20.3 436 45.5 3 000

HG50C-E400SS23-120-K 50 40/0,8 approx. 17.7 x 47.2 x 21.7 approx. 550 33 3 000

HG50C-E400SS23-210-K 50 40/0,8 approx. 17.7 x 47.2 x 21.7 approx. 550 55.5 6 000

HG60C-E400SS23-120-K 60 48/0,8 approx. 17.7 x 47.2 x 21.7 approx. 617 33 6 000

HG70C-E400SS23-165-K 70 56/0,8 approx. 17.7 x 47.2 x 21.7 approx. 680 45 6 000

HG4,1D-E230SE54-24-VF 4,1 4,1/1,0 2 - 15 x 17.9 x 11.5 97 6.6 3 000

HG6,6D-E400ST54-33-VF 6,6 5,3/0,8 2 1 15 x 19.1 x 11.5 12.6 9.6 3 000

HG10,1D-E400ST54-48-VF 10,1 8,1/0,8 2 1 15 x 21 x 11.5 148 13.5 3 000

HG12,1D-E400ST54-57-VF 12,1 9,7/0,8 2 1 15 x 23 x 11.5 168 16.2 3 000

HG15,1D-E400ST54-66-VF 15,1 12,1/0,8 2 1+1 15 x 31.1 x 11.5 236 18 3 000

HG20,1D-E400ST54-81-VF 20,1 16,1/0,8 2 1+1 15 x 32.7 x 11.5 282 22 3 000

HG3,7S-U240SE23-20-VU 3,7 3,7/1,0 2 - 9.5 x 16.5 x 9.1 57 5.6 3 000

HG6X-U240SE23-29-VU 6 6,0/1,0 2 1 8.3 x 13.4 x 19.1 92 8.2 3 000

HG9M-U415SS23-40-VU 9 9,0/1,0 2 1 8.3 x 19.7 x 13.4 137 11.1 3 000

HG12Y-U415SS23-62-VU 12 9,6/0,8 2 1 10.6 x 29.1 x 10.6 232 17.2 3 000

HG18H-U415SS23-78-VU 18 14,4/0,8 2 1+1 11 x 15.6 x 11 216 21.7 3 000

HG25H-U415SS23-110-VU 25 20,0/0,8 2 1+1 11 x 15.6 x 11 265 29.9 3 000

HG40C-U415SS23-108-K 40 32,0/0,8 2 1+1 16.9 x 20.3 x 44.1 437 29.4 6 000

Standard models - 50 Hz, IP 23

Models - IP54

Models - 60 Hz

Automatic frequency control, sockets, voltage meter (models 6,5 kVA and up), automatic fuses and earth leakage relay (-V). Protection class IP23)

Modelos - 50 Hz, IP54

Modelos estándar - 50 Hz, IP23

Modelos - 60 Hz

Control automático de frecuencia, tomacorrientes, medidor de voltaje (modelos de 6,5 kVA y más), fusibles automáticos y relé de fuga a tierra (-V). Protección clase IP23

Fuse/socket box(option available for all models)

Caja de fusibles / tomascorrientes (opción disponible para todos los modelos)

| Modelos de 70-350 kVA disponibles por pedido, modelos de 115 V disponibles| 70-350 kVA models available by request, 115V models available

ModelModelo

Output powerPotencia de saldia

SocketsTomacorrientes

DimensionsDimensiones

WeightPeso

Hydraulic inputEntrada hidráulica

kVA kW/cosφ 1-Phase 220V

3-Phase380V (WxLxH), Inch lbs US gpm max.

psi

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

ModelModelo

Output powerPotencia de saldia

SocketsTomacorrientes

DimensionsDimensiones

WeightPeso

Hydraulic inputEntrada hidráulica

kVA kW/cosφ 1-Phase 220V

3-Phase380V (WxLxH), Inch lbs US gpm max.

psi

ModelModelo

Output powerPotencia de saldia

SocketsTomacorrientes

DimensionsDimensiones

WeightPeso

Hydraulic inputEntrada hidráulica

kVA kW/cosφ 1-Phase 220V

3-Phase380V (WxLxH), Inch lbs US gpm max.

psi

Page 11: Dynaset catalogue us spa

10 PRODUCT CATALOGUE

HGV VARIABLE HYDRAULIC GENERATOR

Stable high power electricity from engine from idle to full throttle:

BASE MACHINES: Trucks, vans, fire engines, rescue vehicles, boats and ships, power packs, temperature controlled vehicles, etc.

APPLICATIONS: AC-power out of any engine at any engine speed: container transport, heating, cooling, powering electric tools, lights, etc.

FEATURES: Hydraulic flow regulates generator speed: stable frequency at all times, no voltage fluctuation under varying load. Distributable components for easy installation. Additional hydraulic PTO available.

GENERADOR HIDRÁULICO VARIABLE

Electricidad estable de alta potencia desde el ralentí hasta la aceleración máxima del

motor:

MÁQUINAS BASE: Camiones, furgonetas, camiones de bomberos, vehículos de rescate, botes y barcos, fuentes de alimentación, vehículos de temperatura controlada, etc.

APLICACIONES: Salida eléctrica de CA de cualquier motor a cualquier velocidad del motor: contenedores para transporte, calefacción, refrigeración, alimentación de herramientas eléctricas, luces, etc.

CARACTERÍSTICAS: El caudal hidráulico regula la velocidad del generador: frecuencia estable en todo momento, sin fluctuación del voltaje bajo carga variable. Componentes distribuibles para fácil instalación. Disponible tomas de potencia (PTO) hidráulica adicional.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 12: Dynaset catalogue us spa

PRODUCT CATALOGUE 11

HGV 3,5 kVA 230 V - R 45 LS 3,5 3,5/1,0 2 - 8.7 x 16.4 x 10.9 176.4 500 - 4000

HGV 6,5 kVA 400 V - R 45 LS 6,5 5,2/0,8 2 1 8.1 x 19.7 x 13.4 198.5 750 - 4000

HGV 10 kVA 400 V - R 45 LS 10 8,0/0,8 2 1 8.1 x 22 x 13.4 253.6 1100 - 4000 *

HGV 10 kVA 400 V - H90 LS 10 8,0/0,8 2 1 8.1 x 22 x 13.4 374.8 700 - 3000

HGV 12 kVA 400 V - H90 LS 12 9,6/0,8 2 1+1 29.9 x 21.3 x 14 396.9 800 - 3000

HGV 15 kVA 400 V - H90 LS 15 12,0/0,8 2 1+1 13 x 32.9 x 17.5 463 700 - 3000

HGV 20 kVA 400 V - R140 LS 20 16,0/0,8 2 1+1 13 x 35.4 x 17.5 507 650 - 3000

Sample models

System includes: Hydraulic generator, oil cooler, hydraulic pump with solenoid control 12/24 V.

Tooth belt drive PTO up to 30kW

Cardan from crankshaft

Flexible coupling from crank-shaft

Standard SAE- and DIN- type factory PTO for gearbox or engine

Split shaft PTO in cardan shaft

PTO installation alternatives

DYNASET has the knowledge to install hydraulic power take off to all engine systems.

The compact and modular nature of DYNASET HGV system allows easy installation without wasting valuable space.

Working boats are ideal environment for Dynaset -systems due to their powerful motors and electricity needs. Fuel consumption savings are instantly available.

Modelos

El sistema incluye: Generador hidráulico, enfriador de aceite, bomba hidráulica con control por solenoide 12/24 V.

Transmisión del PTO con correa dentada hasta 30kW

Cardán desde el cigüeñal

Acople flexible desde el cigüeñal

PTO de fábrica estándar tipo SAE y DIN para caja de cambios o motor

PTO con eje dividido en el eje del cardán

PTO - Alternativas de instalación

DYNASET tiene el conocimiento para instalar tomas de fuerza hidráulica en todos los sistemas a motor.

La naturaleza compacta y modular del sistema HGV de DYNASET permite la fácil instalación sin gastar valioso espacio.

Botes de trabajo son ambientes ideales para los sistemas DYNASET debido a sus potentes motores y necesidades eléctricas. Ahorro de consumo de combustible están instantáneamente disponibles.

ModelModelo

Output powerPotencia de saldia

SocketsTomacorrientes

GeneratorDimensions

Dimensiones

WeightPeso

Motor/drive shaft speedVelocidad del eje

kVA kW/cosφ 1-Phase 3-Phase (WxLxH), Inch lbs For rpmPara rpm

| * Cog belt drive recommended| * Se recomienda el uso de correa dentada

Above models examplery. Please ask for additional information and other confugurarations Los siguientes modelos son ejemplos. Por favor, pregunte por información adicional y otras configuraciones.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 13: Dynaset catalogue us spa

12 PRODUCT CATALOGUE

HWG HYDRAULIC WELDING GENERATOR

The lightest and most compact welder for machinery in the world – up to 400A of

welding power.

BASE MACHINES: Construction and mining machinery, drilling machines, service vehicles, cranes, forestry machines, etc.

APPLICATIONS: On-site repair of wear parts, welding of pipes, pipe casings, sheet metals, etc.

FEATURES: Professional DC-welder, with easy striking and wide current range for all electrode types. Auxiliary AC output for electric tools, lights etc. Heavy duty design for outdoor service. On-board and portable models with quick coupling available.

GENERADOR HIDRÁULICO PARA SOLDADURA

La más liviana y compacta máquina de soldar en el mundo – hasta 400 A de corriente.

MÁQUINAS BASE: Maquinaria para construcción y minería, máquinas perforadoras, vehículos de servicio, grúas, maquinaría para silvicultura, etc.

APLICACIONES: Reparación en sitio de partes desgastadas, soldadura de tuberías, revestimiento de tuberías, láminas de metal, etc.

CARACTERÍSTICAS: Máquina de soldar de CC profesional, con fácil creación del arco y amplio rango de corriente para todo tipo de electrodos. Salida auxiliar de CA para herramientas eléctricas. Diseño de alta durabilidad para uso en exteriores.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 14: Dynaset catalogue us spa

PRODUCT CATALOGUE 13

HWG 200 HWG 180 HWG 400HWG 250 HWG 300

HWG 200 - 30 (portable) 40 200 60 (110) 220 VDC (1) 2 7.5 x 9.1 x 15.4 39.7 9.3 3 000

HWG 200 - 46 (portable) 40 200 60 (110) 220 VDC (1) 2 7.5 x 9.1 x 15.4 39.7 12.7 2 300

HWG 250 - 40 (portable) 60 250 40 (110) 220 VDC (1) 2 7.5 x 9.1 x 15.4 41.9 11.1 3 000

HWG 250 - 60 (portable) 60 250 40 (110) 220 VDC (1) 2 7.5 x 9.1 x 15.4 41.9 16.4 2 300

HWG 180/6k - 33 40 180 50 230/400 VAC 3,0/4,8 8.3 x 13.4 x 24.4 115 9.6 3 000

HWG 220/6k - 48 60 220 40 230/400 VAC 3,5/5,2 8.3 x 13.4 x 25.2 116.9 13.5 3 000

HWG 300/8k - 68 40 300 60 230/400 VAC 4,0/5,8 11.6 x 17.2 x 23.2 202.8 19.1 3 000

HWG 400/10k - 81 40 400 60 230/400 VAC 4,0/5,8 12.2 x 23.3 x 31 220.5 22.8 3 000

Models

Includes: Automatic rotation speed control, sockets, overheat protection, welding cables

Modelos

Incluye: Control automático de velocidad de rotación, tomacorrientes, protección de sobrecalentamiento, cables para soldar.

ModelModelo

Welding currentCorriente de soldar

Auxiliary electricityElectricidad auxiliar

DimensionsDimensiones

WeightPeso

Hydraulic inputEntrada Hidráulica

A (DC)min

A (DC)max

/ED %VoltageVoltaje

V

PowerPotencia

kW

(WxLxH)Inch lbs US gpm Max

psi

K-series welding generators below produce single- and three-phase power at 50 Hz. 60 Hz models available on request.Los siguientes generadores para soldar serie K producen potencia monofásica y trifásica a 50 Hz. Modelos de 60 Hz disponibles por pedido.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 15: Dynaset catalogue us spa

14 PRODUCT CATALOGUE

HMG HYDRAULIC MAGNET GENERATOR

Complete power source for lifting magnets for all work machines:

BASE MACHINES: Material handling and demolition machinery, cranes, truck, tractors, etc.

APPLICATIONS: recycling, cleaning and handling of scrap metal, castings, bars, plates, swarf, slag, etc.

FEATURES: Electric in-cabin controls. Automatic quick demagnetizing with sorting function. Auxiliary AC power for grinding, cutting, welding, etc.

GENERADOR HIDRÁULICO PARA IMÁN

Fuente de alimentación completa para imanes industriales, para todo tipo de maquinaria:

MÁQUINAS BASE: Maquinaria para demolición, grúas, camiones, tractores, etc.

APLICACIONES: Reciclaje, limpieza y manejo de chatarra, piezas de fundición, barras, láminas, virutas, escoria, etc.

CARACTERÍSTICAS: Controles eléctricos en cabina. Rápida desimantación automática para uso como clasificadora. Salida auxiliar de CA para esmeriles, cortadoras, soldadura, etc.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 16: Dynaset catalogue us spa

PRODUCT CATALOGUE 15

MAG

HMG PRO 6.5 HMG 10 HMG 15 HMG 30

MAG 700 MAG MAG 900 ED100

HMG 3 kW 220 VDC - 17 3,5 3 E (12/24 V) / C 11.4 x 16.5 x 10 61.8 4.8 3 600 / 2 800

HMG 6 kW 220 VDC - 33 6 5,5 E (24 V) / C 14.4 x 18.7 x 12.2 108.1 9.6 3 600 / 2 800

HMG 10 kW 220 VDC - 48 10 9,5 E (24 V) / C 15.4 x 19.1 x 14.2 138.9 13.5 3 600 / 2 800

HMG 12 kW 220 VDC - 57 12 11,5 E (24 V) / C 15.4 x 21.3 x 14.2 154.3 17 3 600 / 2 800

HMG 15 kW 220 VDC - 62 15 14,5 E (24 V) / C 16.9 x 31.1 x 17.7 242.5 17.7 3 600 / 2 800

HMG 20 kW 220 VDC - 86 20 19,5 E (24 V) / C 19.7 x 35.4 x 17.1 352.8 24.4 3 600 / 2 800

HMG 30 kW 220 VDC - 120 30 29,5 E (24 V) / C 21.7 x 42.1 x 23.7 463 33.1 3 600 / 2 800

HMG 40 kW 220 VDC - 165 40 39,5 E (24 V) / C 21.7 x 46.9 x 23.7 552 45 3 600 / 2 800

HMG PRO 6 kW 220VDC - 33 6 5,5 E / H 12.6 x 19.7 x 15 108.1 9.6 3 600 / 2 800

HMG PRO 10 kW 220VDC - 48 10 9,5 E / H 12.6 x 22.1 x 15 138.9 13.5 3 600 / 2 800

MAG 700UL/3,0 kW 700 3 5500 2700 105 80 70 40 290

MAG 900L/4,9 kW 900 4,9 10500 5250 230 200 190 100 650

MAG1000M/5,5kW 1000 5,5 16000 8000 350 320 290 150 780

MAG1200L/9,0 kW 1200 9 15000 7500 410 370 360 190 1100

MAG1400L/10,0 kW 1400 10 18000 9000 560 530 510 240 1400

MAG1500H/12,5kW 1500 12,5 42000 21000 1450 1300 1200 600 2950

MAG1600M/15kW 1600 15 44000 22000 1330 1220 1150 580 3300

MAG1600H/16kW 1600 16 51500 25750 1650 1500 1400 700 3850

MAG1800M/25kW 1800 25 71000 35500 2150 1980 1830 950 4200

LIFTING MAGNETS

High quality lifting magnets with strong steel frame, deep field’s aluminum windings, screwed hooking points and insulated connection box. Quick couplings and grapple couplings available as options. Special sizes, shapes and finishes by request.

Lifting magnets

Magnet Generator

Lifting magnets below require a matching magnet generator for operation (see table Magnet Generators)

IMANES DE ELEVACIÓN

Imanes de elevación de alta calidad con estructura de acero endurecido, devanados en aluminio de campo profundo, puntos de enganche atornillados y caja de conexión aislada. Acoples rápidos y acoples con pinzas mecánicas están disponible como opciones. Tamaños, formas

y terminados especiales por pedido.

IMANES DE ELEVACIÓN Los imanes de elevación siguientes necesitan un generador hidráulico para imanes correspondiente para su operación (Ver tabla de Generador para imán)

Imanes de elevación

Generador Hidráulico para Imán

Model Modelo

Electric PowerPotencia Eléctrica

SocketsTomacorrientes

ControlControl

DimensionsDimensiones

WeightPeso

Hydraulic inputEntrada hidráulica

Power PotenciaMax. kW

CoilBobina

Max. kW(WxLxH) Inch kg US gpm Max./eff.

psi

ModelModelo

ØPower

PotenciaLifting capacity (nominal) lbs

Capacidad de elevación (nominal) lbsWeight

Peso

Inch 220 VDCkW

Tear-off w/ air gap Ø/300Arranque con

entrehierro Ø/300

Slabs, blocksLosas, bloques

Pig ironLingotes

Scrap / Chatarralbs

Grade: 3A 24 40

HMG PRO-series below feature on-board control method selection (E or H) and high speed demagnetization in 0,8 s.Las siguientes series de HMG PRO ofrecen método de selección de control en cabina (E o H) y rápida velocidad de desimantación en 0,8s.

Note: E= Electric: magnet on/off by electric switch; C=Combi: magnet on/off by hydraulic flow (optional, see accessories); H = Hydraulic, Magnet on/off by hudraulic flow or electric switch, no extra parts needed (HMGE models only)Nota: E= Eléctrico: Encendido/apagado del imán por interruptor eléctrico; C=Combi: Encendido/apagado del imán por flujo hidráulico (opcional, ver Acceso-rios); H= Hidráulico: Encendido/apagado del imán por flujo hidráulico o interruptor eléctrico, no es necesario partes adicionales (sólo modelos HMGE)

Other magnet types available on request: rectangular, high power, submersible, etc.Otros tipos de imánes disponibles por pedido: rectangulares, alto poder, sumergibles, etc.

230/400 V(optional)(opcional)

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 17: Dynaset catalogue us spa

16 PRODUCT CATALOGUE

HMAG

HMAG 700-18-k 28.3 3 12 000 6 000 230 175 155 88 771 4.8 5100 / 3000

HMAG 900-32-k 37.4 4,9 23 000 11 000 510 440 410 220 1874 8.5 5100 / 3000

HMAG 1200-48-k 49.2 9 33 000 16 000 900 1 800 790 420 3307 12.7 5100 / 3000

HMAG 1400-54-k 57.1 10 90 000 20 000 1 200 2 430 1130 530 6614 14.3 5100 / 3000

HYDRAULIC MAGNET

Scrap metal recycling and cleaning:

BASE MACHINES: Demolition handlers, excavators, pulverizers, crushers, grapples, trucks, tractors, etc.

APPLICATIONS: Rebar recovery from concrete waste, cleaning and handling scrap metal, plate, castings, chips, etc.

FEATURES: Magnet contains its own power source - hydraulic flow activates the magnet on and stopping the flow activates demagnetisation. Designed for sharing between several work machines. Ideal rental unit.

Hydraulic magnet

Hydraulic magnets below are supplied with built-in magnet generator, so that only the hydraulic connection is required. ON/OFF switching and demagnetiza-tion are triggered by hydraulic flow.

IMÁN HIDRÁULICO

Reciclaje y limpieza de chatarra:

MÁQUINAS BASE: Equipos para demolición, excavadoras, pulverizadoras, trituradoras, pinzas mecánicas, camiones, grúas, etc.

APLICACIONES: Recuperación de barras de refuerzo de residuos de hormigón, limpieza y manejo de chatarra, placas, piezas de fundición, virutas, etc.

CARACTERÍSTICAS: El imán contiene su propia fuente de poder – caudal hidráulico activa el imán y desimantización automática a falta de caudal. Diseñado para ser compartido entre varias máquinas de trabajo. Unidad ideal para alquilar.

Imán Hidráulico

Los imanes hidráulicos siguientes son entregados con un generador para imán incorporado, por lo que sólo es necesario la conexión hidráulica. El interrup-tor de encendido/apagado y la desimantación activados por el caudal hidráulico.

ModelModelo

ØPower

PotenciaLifting capacity (nominal) lbs

Capacidad de elevación (nominal) lbsWeight

PesoHydraulic input

Entrada hidráulica

Inch 220 VDCkW

Tear-off w/ air gap Ø/300Arranque con

entrehierro Ø/300

Slabs, BlocksLosas, bloques

Pig ironLingotes

Scrap / Chatarralbs US

gpmMax./Eff.

psiGrade: 3A 24 40

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 18: Dynaset catalogue us spa

PRODUCT CATALOGUE 17

HGG

HGG 200

HGG 200 - 30 28,5 40 200 8.3 x 13.4 x 24.4 114 9.5 3000

HYDRAULIC GROUND POWER GENERATOR

Ground power always available in mobile movers and utility vehicles:

BASE MACHINES: Push back tugs and tractors, airport trucks, service vehicles, etc.

APPLICATIONS: Ground power electricity for aircraft towing, stand-by service, etc.

FEATURES: Aviation standard 28 VOC up to 200 A output (11O V @ 400 Hz as an option). Easy compact installation to any utility vehicles. Dynaset also offers 115, 230 and 400 V hydraulic power sources for cleaning team vehicles, power washing for toilet vacuum trucks and HPW-pump system for aircraft deicing vehicles.

Ground power generator

GENERADOR HIDRÁULICO DE POTENCIA EN TIERRA

Potencia en tierra siempre disponible en motores móviles y vehículos utilitarios:.

MÁQUINAS BASE: Remolcadores de aviones y tractores, camiones de aeropuertos, vehículos de servicio, etc.

APLICACIONES: Electricidad en tierra para remolques de aviones, servicio en espera, etc.

CARACTERÍSTICAS: Estándar de aviación de 28 V DC hasta 200 A de salida (opcional: 110 V@400 Hz). Instalación fácil y compacta a cualquier vehículo utilitario. Dynaset también ofrece: fuentes de alimentación de 115, 230 y 400 V, para vehículos de equipos de limpieza; lavadores a presión, para vehículos para vaciado de inodoros; y sistema de bomba HPW, para vehículos para descongelar aviones.

Generador hidráulico de potencia en tierraModel

ModeloDirect current

Corriente ContinuaDimensions

DimensionesWeight

PesoHydraulic input

Entrada hidráulica

V (DC)max

A (DC)min

A (DC)max (WxLxH) Inch lbs US gpm Max psi

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 19: Dynaset catalogue us spa

18 PRODUCT CATALOGUE

ACC

HG

HG

3,5

HG

4

HG

5

HG

6,5

HG

10

HG

12

HG

15

HG

20

• • • • • • • •

• • • • • • • •

• • • • •

• • • • •

• • • • •

• •

HGV

HG

V 3,

5

HG

V 6,

5

HG

V 10

HG

V 12

HG

V 15

HG

V 20

• • • • • •

• • • • • •

• • • • •

• • • • • •

ACCESSORIES

Automatic starterArranque automático

Automatic generator start when electricity is neededArranque automático del generador cuando se necesite electricidad

Remote starter Arranque remoto

Remote start generator when neededArranque remoto del generador cuando se necesite

Electric central Central eléctrica

With 32 ft m cableCon 32 ft de cable

Cooling grill shieldEscudo

Protection class IP34 Protección clase IP34

Oil Cooler Enfriador de aceite

Mounts to generator air intake Montado en la entrada de aire del generador

Circuit breaker Disyuntores

Electric over and under voltage protectionProtección para bajo y alto voltaje eléctrico

PTO for aux. hydr. connection PTO para conexiones hidr. aux.

Flujo de 13 US gpm, para operar malacate hidráulico, etc.Flow rate 13 US gpm, for operating hydraulic winch, etc.

Oil reservoir, 10 gallonsDepósito de aceite, 10 gallons

Includes: oil level gauge/alarm, oil filter, temperature gauge, etc.Incluye: indicador/alarma de nivel de aceite, filtro de aceite, indicador de temperatura, etc.

Electric central Central eléctrica

For easier access to sockets.Para fácil acceso de las tomas de corriente.

Remote starter Arranque remoto

Remote start generator when needed Arranque remoto del generador cuando se necesite.

More special equipments available - Ask more from your sales contact.Disponibles más equipos especiales - Pregunte a su contacto de ventas.

ACCESORIOS

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 20: Dynaset catalogue us spa

PRODUCT CATALOGUE 19

HWG

HW

G 2

00

HW

G 2

50

HW

G 1

80 k

HW

G22

0 k

HW

G 3

00 k

HW

G 4

00 k

• •

• • • • • •

• • • •

HMG / HMGE

HM

G 3

HM

G 6

HM

G 1

0

HM

G 1

2

HM

G 1

5

HM

G 2

0

HM

G 3

0

HM

G 4

0

HM

GE

6

HM

GE

10

• • • • • • • •

• •

• • • •

• • •

HMAG / MAG

MAG

700

L

MAG

900

L

MAG

100

0M

MAG

120

0L

MAG

140

0L

MAG

150

0H

MAG

160

0M

MAG

160

0H

MAG

180

0M

HM

AG 7

00

HM

AG 9

00

HM

AG 1

200

•• • • • • • • •

• • • • • • • • • • • •

• • • • • • • • • • • •

Wired remote control Control remoto

Welding current remote control Control remoto para corriente de soldar

Cables, 32 ftCables, 32 ft

Welding cables with electrode holder and ground clampCables para soldar con sujetador de electrodo y pinza de tierra

Separate electric central Central eléctrica separada

With 32 ft cable Con 32 ft de cable

More special equipments available - Ask more from your sales contact.Disponibles más equipos especiales - Pregunte a su contacto de ventas.

HMG wiring set PCISet de cableado PCI para HMG

Cabin control wiring with switches Cableado con interruptores para control en cabina

HMGE wiring set Set de cableado para HMGE

Cabin control wiring with switches Cableado con interruptores para control en cabina

Combi magnet kit For HMG-series Combi Kit para HMGs

ON/OFF-switching by hydraulic flow, Installation on top of magnet Interruptor ON/OFF por flujo hidráulico, instalación sobre el imán

Separate electric sockets Tomas de corriente eléctrica separada

115/230 V 60 Hz sockets & 230/400 V 50 Hz sockets115/230 V 60 Hz tomas & 230/400 V 50 Hz tomas

More special equipments available - Ask more from your sales contact.Disponibles más equipos especiales - Pregunte a su contacto de ventas.

Magnet cable kit Kit de cables para imán

Cable 64 ft to the boom with plugs and guardCable de 64 ft con conectores y cubierta

Quick attachment plate Plato de acople rápido

Volvo, Hitachi, Doosan, Grapple mushroom...

Quick attachment Acople rápido

Oil quick, Lehnhoff, etc

Ask for other shapes (e.g. rectangular, square..), ED100% Magnet, Deep field and underwater magnets from DYNASETPregunte por otras formas (ej: rectangular, cuadrado...), Imán ED100%, Imanes de campo profundo y subacuáticos de DYNASET

More special equipments available - Ask more from your sales contact.Disponibles más equipos especiales - Pregunte a su contacto de ventas.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 21: Dynaset catalogue us spa

20 PRODUCT CATALOGUE

INFO

Qpf

Qh

Qpf_max

Qh_max

Ppf

Ph

Ppf_max

Ph_max

HIGH PRESSURE WATER

High pressure with atomizing nozzle creates ultra fine water mist. It creates 1000 times more surface area for the water, which makes it more effective with smaller water consumption.

High pressure water can be used for effectiveeveryday mobile cleaning tasks, but it is

applicable as an alternative for industrial and other applications such as pressure washing, street-, pipeline- and bin cleaning, dust suppression, water cutting, hydro demolition and scaling, fire fighting, drilling fluid pumping, water hydraulics, washing robot, underwater works, submersible pumping etc.

Best power-to-size ratio in the world. Patented piston-to-hydraulic piston principle without any rotating parts guarantees superior durability and extremely compact size. Fro-stroke function closes intake valves fast, which seals the valves and guarantees longest life time even with the use of dirty water.

HPW-pump’s water flow and pressure corresponds linearly to hydraulic flow and pressure, from zero to maximum. Dynaset HPW models cover power range of 10 – 200 kW, pressure 1 300 -23 200 psi, and flow from 8 to 80 US gpm.

Relation of pumping fluid’s flow rate and pressure to corresponding parameters of hydraulic fluid is linear.

Dynaset HPW’s unique piston-to-piston principle guarentees longevity and unsurpassed power-to-size -ratio.

Hydraulic fluid flow

Pum

ping

flui

d flo

w

Hydraulic pressure

Pum

ping

flui

d pr

essu

re

Agua a alta presión puede ser usada para ladiaria eficaz tarea de limpieza móvil., pero es

aplicable también como una alternativa para la industria y otras aplicaciones tales como el lavado a presión, la limpieza de calles, tuberías y depósitos de basura, supresión de polvo, corte con agua, hidro-demolición y desincrustación, extinción de incendios bombeo de fluido para perforación, robot para lavado, trabajos subacuáticos, bombeo sumergible, etc.

La mejor relación potencia-tamaño en el mundo. Principio patentado pistón-pistón sin partes rotativas garantiza alta durabilidad y tamaño extremadamente compacto. La función de vaivén cierra las válvulas de admisión rápidamente, lo que las sella y garantizan mayor tiempo de vida, incluso al utilizar agua sucia.

El caudal de agua y presión de la bomba HPW corresponde linealmente al caudal y presión hidráulica, desde cero hasta el máximo. Los modelos de las bombas HPW cubren un rango de potencia de 10-200 kW, presión de 1 300 - 23 200 psi, y caudal desde 8 hasta 80 US gal.

Alta presión con boquilla atomizadora crea una niebla ultra fina. Crea 1000 veces más área superfi-cial de agua, lo que la hace más efectiva con un bajo consumo de agua.

La relación de caudal y presión del fluido bombeado con sus correspondientes parámetros del fluido hidráulico es lineal.

Las HPWs de Dynaset con su principio único de pistón-pistón garantizan larga duración y una relación potencia-tamaño sin igual.

AGUA A ALTA PRESIÓN

Caudal huile

Caud

al a

gua

Presion idraulica

Pres

ion

agua

Page 22: Dynaset catalogue us spa

PRODUCT CATALOGUE 21

HPW HYDRAULIC HIGH PRESSURE POWER WASHER

Outstanding durability with the best power/weight -ratio in the World. Poweful,

patented piston-to-piston -principle without rotating parts guarantees reliability even in dirty works. Unlimited dry run and good intake suction ensure easy power washing or pumping from containers or natural water sources :

BASE MACHINES: Excavators, loaders, tractors, trucks, platform lifts, crushers, harvesters, mining machines, concrete trucks, cleaning vehicles, fire engines, rescue and service vehicles, ships, etc.

APPLICATIONS: Power washing, street-, pipeline- and bin cleaning, dust suppression, water cutting, hydro demolition and scaling, fire fighting, drilling fluid flushing, water hydraulics, robotic washing, pressure testing, offshore and underwater works, etc.

FEATURES: Linear flow and pressure control 0 - 100%. No rotating parts – low maintenance.

BOMBA HIDRÁULICA DE AGUA A ALTA PRESIÓN

Extraordinaria durabilidad con la mejor relación potencia-peso en el mundo.

Bomba hidráulica autocebante usando el principio de pistón-pistón:

MÁQUINAS BASE: Excavadoras, palas cargadoras, tractores, camiones, elevadores de plataforma, trituradoras, segadoras, maquinaria para minería, hormigoneras, vehículos para limpieza, camiones de bomberos, vehículos de servicio y recate, barcos, etc.

APLICACIONES: Lavado a presión, limpieza de calles, tuberías y depósitos, supresión de polvo, corte por chorro de agua, demolición y desincrustación, extinción de incendios, bombeo de fluido para perforaciones, hidro-hidráulica, lavado por robots, pruebas de presión, trabajos en alta mar y subacuáticos, etc.

CARACTERÍSTICAS: Control lineal de caudal y presión del 0 al 100%. Sin partes rotativas, bajo mantenimiento: sólo dos partes movibles.

Page 23: Dynaset catalogue us spa

22 PRODUCT CATALOGUE

HPW 200 HPW 220 HPW 460 HPW 1000 HPW 90 HPW 800 HPW 200 MOBIHPW 420 & Carry Frame

MP1

HPW200/30-45 2 900 8 10 1,18 9.7 x 6.3 x 6.7 17.6 11.9 3 000

HPW200/30-45-ST 2 900 8 10 1,18 9.7 x 6.3 x 7.7 17.6 11.9 3 000

HPW200/30-45-AB-AL 2 900 8 10 1,18 9.7 x 6.3 x 7.7 26.5 11.9 3 000

HPW200/30-45-ST-AB-AL 2 900 8 10 1,18 9.7 x 6.3 x 7.7 26.5 11.9 3 000

HPW200/30-45 MOBI * 2 900 8 10 1,18 14.2 x 11 x 37.4 44 11.9 3 000

HPW420/20-50 6 000 5.3 14 2,12 9.6 x 4.9 x 6.1 33 13.2 3 200

HPW420/20-50-PA 6 000 5.3 14 2,12 9.6 x 5.9 x 8.3 39.7 13.2 3 200

HPW220/50-70 3 200 13.2 18 1,26 11 x 5.9 x 7.5 33 18.5 3 000

HPW220/50-70-PA 3 200 13.2 18 1,26 11 x 10 x 9.3 39.7 18.5 3 000

HPW220/50-70 MOBI * 3 200 13.2 18 1,26 14.2 x 11 x 37.4 53 18.5 3 000

HPW90/150-85 1 300 39.6 23 0,52 14.6 x 6.7 x 9.6 66 22.5 3 000

HPW90/150-85-PA 1 300 39.6 23 0,52 14.6 x 9.6 x 10.8 68.3 22.5 3 000

HPW520/30-85 7 600 8 26 2,62 11.4 x 4.5 x 6.7 44.1 22.5 3 000

HPW520/30-85-PA 7 600 8 26 2,62 11.4 x 6.5 x 8.9 48.5 22.5 3 000

HPW180/90-115 2 600 23.8 27 1,12 13 x 8.7 x 7.1 59.5 30.4 3 000

HPW180/90-115-PA 2 600 23.8 27 1,12 13 x 10.2 x 7.5 64 30.4 3 000

HPW460/50-115 6 700 13.2 39 2,03 12.6 x 7.7 x 7.9 66.1 30.4 3 600

HPW460/50-115-PA 6 700 13.3 39 2,03 12.6 x 7.7 x 7.9 72.8 30.4 3 600

HPW130/180-140 1 900 47.5 39 0,68 16.3 x 6.5 x 10.2 99.2 37 3 600

HPW130/180-140-PA 1 900 47.5 39 0,68 16.3 x 9 x 10.6 103.6 37 3 600

HPW1000/30-140 14 500 8 40 4 13.4 x 7.7 x 7.7 86 37 3 000

HPW800/30-140 11 600 8 40 4 13.4 x 7.7 x 7.7 86 37 3 000

HPW800/30-140-LS 11 600 8 40 4 13.4x 7.7 x 7.7 86 37 3 000

HPW1600/15-140 23 200 4 40 7,87 13.4 x 7.7 x 6.3 79.4 37 3 300

HPW1600/15-140-LS 23 200 4 40 7,87 13.4 x 7.7 x 6.3 79.4 37 3 300

HPW300/300-350 4 400 80 150 1,06 29.1 x 10.6 x 14.2 375 92.5 4 400

HPW300/300-350-LS 4 400 80 150 1,06 29.1 x 10.6 x 14.2 375 92.5 4 400

HPW1200/100-400 17 400 26.2 200 4 36 x 10.6 x 13.8 390 105.7 5 100

Models

HPW pumps combined with inexpensive injector based accessories such as filling pump, flow multiplier or sand blaster give new oppor-tunities for more effective work.

Right nozzle is in key role for best possible results

HPW pump can be run in parellel for double the flow.

Modelos

Las bombas HPW combinadas con accesorios de bajo costo tipo inyector como bombas de llenado, multiplicadores de caudal o chorro de arena da nuevas oportunidades para un trabajo más efectivo.

La boquilla correcta es clave obtener los mejores resultados posibles.

ModelModelo

Water output power Potencia de Salida del agua

Pressure ratioRazón de presión

DimensionsDimensiones

WeightPeso

Hydraulic inputEntrada hidráulica

Pressure Presión

psi

Flow CaudalUS gpm

Power Potencia

kW

Water/Hydraulics Agua / Hidráulica

(WxLxH)inch

lbs US gpm Max psi

Models “LS” equipped with water pressure regulator. Models “PA” equipped with water pressure unloader valve. Models “AB” with body construction of aluminium bronze. Model “MOBI” is mounted on a wheeled hand truck, complete with 32 ft pressure hose, ST-15-800-SW washing pistol, 10 ft suction hose and 2x6,5 ft hydraulic hoses.

Los modelos LS estan equipados con reguladores de presión. Los modelos PA están equipados con válvulas de descarga de presión. Los modelos AB tienen el cuerpo construido con bronce de aluminio. Los modelos MOBI están montados en una carretilla, incluyendo manguera de presión de 32 ft, una pistola para lavado ST-15-800-SW, una manguera de succión de 3 ft y dos mangueras hidráulicas de 6,5 ft.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 24: Dynaset catalogue us spa

PRODUCT CATALOGUE 23

KPL

High pressure street washing for dust free surfaces with reduced water consumption:

BASE MACHINES: Tractors, loaders, trucks, pickups, sweepers, municipal vehicles, etc.

APPLICATIONS: High pressure washing of road surfaces, tunnels, public areas, cow sheds, roofs, etc.

FEATURES: Cleaning with only 1 US gpm of water per 40 sq ft. With optional accessories: brush nozzles, road marking removal equipment etc.

STREET WASHING UNIT

UNIDAD PARA LAVADO DE CALLES

Lavado de calles a alta presión para superficies libres de polvo con bajo

consumo de agua:

MÁQUINAS BASE: Tractores, palas cargadoras, camiones, camionetas, vehículos barredores, vehículos municipales, etc.

APLICACIONES: Lavado a alta presión de pavimentos, túneles, áreas públicas, establos, techos, etc.

CARACTERÍSTICAS: Limpieza con tan solo 1 litro de agua por m2. Con accesorios adicionales: limpieza / enfriamiento del aire urbano, remoción de señalización vial, etc.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 25: Dynaset catalogue us spa

24 PRODUCT CATALOGUE

KPL 270-200 KPL 600-200 KPL 950-220 KPL 1200-220

KPL 200 KPL 220 KPL 180

KPL PICK-UPHBN BRUSH NOZZLE

KPL 270-200-1250x8* 2 900 8 9.5 176.4 4’11” 11.9 3 000

KPL 600-200-1650x9** 2 900 8 19.4 419 5’11” 11.9 3 000

KPL 950-200-1650x9** 2 900 8 33.5 573 5’11” 11.9 3 000

KPL 950-220-1850x9*** 3 200 / 2 600 13.2 33.5 573 6’7” 18.5 3 000

KPL 1200-220-1850x9**** 3 200 / 2 600 13.2 42.4 838 6’7” 18.5 3 000

KPL 1200-180-2200x10**** 2 600 23.8 42.4 838 8’2” 30.4 3 000

KPPL 600-800/30-140***** 11 600 8 19.4 485 20” 37 3 000

KPL 200-1650x9* 2 900 8 - 110 5’11” 11.9 3 000

KPL 220-1850X9* 3 200 / 2 600 13.2 - 132 6’7” 18.5 3 000

KPL 180-2200x10* 2 600 23.8 - 143 8’2” 30.4 3 000

KPL TRUCK 90-2200x11** 1 300 40 - 143 8’2” 22.5 3 000

KPL TRUCK 180-2200x10** 2 600 90 - 143 8’2” 30.4 3 000

KPL PICK-UP 1000-200-1650x9 2 900 8 35 176 5’11” 11.9 3 000

Models for Pick-UP trucks

Standard supply: Hydraulic pump, tooth belt drive, oil tank and oil cooler, control valves, HPW pump, water tank 35 qu ft, washing pipe, hydraulic hose reel, pressure hose 60 ft

Models without water tank

Standard supply: mounting frame, HPW pump, hydraulically operated washing pipe, washing pistol, spring return hose reel and 20m hose.

Models for Loaders, tractors, etc.

Standard supply: Water tank, HPW pump, hydraulically operated washing pipe (not in KPL 270), washing pistol, spring return hose reel and 60ft hose.

Modelos para pick-up

Suministro estándar: Bomba hidráulica, acople HDT de correa de tiempo, depósito de aceite y enfriador de aceite, tanque de agua de 35 qu ft, válvulas de con-trol, carrete para maguera hidráulica, manguera de presión de 60 ft

Modelos sin tanque de agua

Suministro estándar: Bomba HPW, carrete para maguera hidráulica, manguera de presión de 20 m.

Modelos para cargadoras, tractores, etc.

Suministro estándar: Bomba HPW, carrete para maguera hidráulica, tanque de agua, manguera de presión de 60ft.

Unit type Tipo de unidad

Washing power Potencia de lavado

Water tank Tanque de agua

Weight Peso

Width Ancho

Hydraulic input Entrada hidráulica

Presión Máx. Max. Pressure

psi

Salida Máx. Max. Output

US gpm

Volume Volumen

cu ft.lbs ft inch US gpm

max./effpsi

Unit typeTipo de unidad

Washing power Potencia de lavado

Water tank Tanque de agua

Weight Peso

Width Ancho

Hydraulic input Entrada hidráulica

Max. PressurePresión Máx.

bar

Salida Máx. Max. Output

US gpm

VolumenVolume

cu ft.lbs ft inch US gpm

max./effpsi

Unit type Tipo de Unidad

Washing power Potencia de lavado

Water tank Tanque de agua

Weight Peso

Width Ancho

Hydraulic input Entrada hidráulica

Max. PressurePresión Máx. psi

Max. OutputSalida Máx.

US gpm

VolumeVolumen

cu ft.lbs ft inch US gpm

max./effpsi

Recommended base machines: Maquinaria Base recomendada:

* Tractors, maintenance vehicles etc. with their own water tank / Tractores, vehículos para mantenimiento, etc. con su propio tanque de agua** Truck, lorries etc. / Camiones, trailers, etc.

Recommended base machines:Maquinaria base recomendada:

* Small loaders / Pequeños cargadores: Agromatic, Avant, Gehl, Jolly, Kramer, Weidemann, ... Working width / Ancho de trabajo 5 ft** Small loaders / Pequeños cargadores: Bobcat, Gehl, Wille, LM-Track, Volvo, ... Working width / Ancho de trabajo 6 ft*** Wheeled loaders / Cargadores con ruedas: Working width / Ancho de trabajo 6.5 m**** Wheeled loaders / Cargadores con ruedas: Working width / Ancho de trabajo 8.2 m***** Road Marking removal / Remoción de señalización vial

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 26: Dynaset catalogue us spa

PRODUCT CATALOGUE 25

PPL HIGH PRESSURE PIPE CLEANING UNIT

Self-propelled high pressure pipe and drain cleaning unit:

BASE MACHINES: Sewer & pick-up trucks, vans, vacuum & utility vehicles, trucks, tractors, etc.

APPLICATIONS: Cleaning, de-clogging, de-icing, flushing and purging of pipelines, drains, sewers, storm drains, culverts, etc.

FEATURES: HPW-piston-to-piston pump, self-propelled pulsating cleaning nozzle for over 100 m reach in horizontal pipes and over 5 storeys in vertical drains. Easy retraction and enhanced purge effect with hydraulic hose reel. Optional water heater for more cleaning power.

UNIDAD PARA LIMPIEZA DE TUBERÍAS A ALTA PRESIÓN

Unidad de limpieza de tuberías y desagües a alta presión autopropulsada:

MÁQUINAS BASE: Camiones de desagüe y pickups, furgonetas, vehículos de aspiración y utilitarios, camiones, tractores, etc.

APLICACIONES: Limpieza, desatasco, descongelamiento, descarga y purga de líneas de tuberías, desagües, alcantarillado, alcantarillado pluvial, cloacas, etc.

CARACTERÍSTICAS: Bomba de pistón-pistón (HPW), autopropulsada, con boquilla de limpieza intermitente para alcance horizontal en tuberías de más de 100 m y alcance vertical en drenajes de más de 5 plantas. Fácil retracción y efecto mejorado de purga con carrete hidráulico para la manguera. Opcional, calentador de agua para más poder de limpieza.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 27: Dynaset catalogue us spa

26 PRODUCT CATALOGUE

PPLD 460

PPL 600-180PPL 600-200

PPL 180/90 -K

PPL 500-200/30-45 2 900 8 3/8 162 14 x 35 x 26 152 11.9 3 000

PPL 500-220/50-70 3 200 13.2 1/2 162 14 x 35 x 26 159 18.5 3 000

PPL 600-180/90-115 2 600 23.8 3/4 162 18 x 36 x 26 161 30.4 3 000

PPL 600-460/50-115 6 700 13.2 1/2 328 26 x 36 x 26 187 30.4 3 000

PPLD - 460/50-42kW-T 6 700 13.2 ~3 000 30.4 3 000

LKH 500-xx-xx 230 164 (98) - - 14 x 35 x 26 86 2.6 3 000

LKH 600-300-xx 328 262 196 164 (98) 18 x 36 x 26 99 2.6 3 000

LKH 600-500-xx (558) 394 328 262 164 26 x 36 x 26 125 2.6 3 000

Compact PPL unit and water reservoir in service van leave lots of free space for other uses.

Hydraulic Hose Reels

Pipe cleaning units

Carrete para manguera hidráulica

Modelos

La configuración del equipo DYNASET para limpieza de tuberías instalado en furgonetas deja suficiente espacio para las herramientas.

Unit type Tipo de unidad

Washing power Potencia de lavado

Recommended hose Manguera

recomendada

Hose reel dimensionsDimensiones del carrete de la manguera

Hydraulic input Entrada hidráulica

Pressure Presión max. psi

Flow Caudal

max US gpm

DiámetroDiameter

inch

Length Longuitud

ft

(WxLxH)inch

Weight w/o hosePeso sin manguera

lbs

MaxUS gpm

Maxpsi

Trailer unit with diesel engineUnidad para camión con motor diesel

Unit type Tipo de unidad

Water hose Manguera de agua

Dimensions Dimensiones

Weight w/o hose Peso sin manguera

Hydraulic requirements Requerimientos hidráulicos

Recommended length, ft Longuitud recomendada, ft (WxLxH)

inchlbs

MaxUS gpm

Maxpsi

3/8” 1/2” 5/8” 3/4” 1”

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 28: Dynaset catalogue us spa

PRODUCT CATALOGUE 27

HPW-DUST HIGH PRESSURE DUST SUPPRESSION SYSTEM

Pure water based high power dust suppression system with ultra fine water fog for superior

effect:

BASE MACHINES: Demolition long boom excavators, loaders, mobile crushers, screeners and convoyers and attachments such as crushers, pulverizers, breakers, drills, grapples etc.

APPLICATIONS: Dust suppression in quarries, demolition sites, material handling areas, recycling and waste management, etc.

FEATURES: High power directional atomizing jets for targeted dust suppression turbo jets or housing umbrella for area dust suppression, foiling debris etc. Low water consumption: high power, no flooding in working area.

SISTEMA DE SUPRESIÓN DE POLVO A ALTA PRESIÓN

Sistema de supresión de polvo a base de agua de alto poder con niebla ultra fina para

efecto superior:

MÁQUINAS BASE: Excavadoras de pluma larga para demolición, palas cargadoras, trituradoras, pulverizadoras, martillos, perforadoras, pinzas, trituradoras móviles, etc.

APLICACIONES: Supresión de polvo en canteras, sitios de demolición, áreas de manejo de material, reciclaje y gestión de residuos, etc.

CARACTERÍSTICAS: Atomizadores direccionales de alto poder para supresión de polvo enfocada. Turbo jets o rociadores de neblina (“dust umbrella”) para supresión de polvo. Bajo consumo de agua: sin polvo, sin inundaciones del área. Aire limpio, mejor calidad de trabajo, intervalos entre servicio más largo para filtros, enfriadores, etc.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 29: Dynaset catalogue us spa

28 PRODUCT CATALOGUE

Dust suppression kit

HPW 200/30-45 Dust (1) 1 750 - 2030 1.3 … 8 3 (10)* 9.7 x 6.3 x 6.7 42 0 - 11.9 1 900 - 2 300

HPW 200/30-45 Double Dust (2) 1 750 - 2030 1.3 … 8 3 (20)* 9.7 x 6.3 x 6.7 42 0 - 11.9 1 900 - 2 300

HPW 220/50-70 Double Dust (3) 1 750 - 2030 1.3 … 13.2 5 (40)* 11 x 5.9 x 7.5 59 0 - 13.2 1 900 - 2 300

HPW 180/90-115 Double Dust (4) 1 750 - 2030 1.3 … 24 5 (40)* 13 x 8.7 x 7.1 86 0 - 30.4 1 900 - 2 300

HPW 130/180-140 Double Dust (4) 1 750 - 2030 1.3 … 45 5 (40)* 16.3 x 6.5 x 10.3 101 0 - 37 1 900 - 2 300

High Pressure Dust Suppression System

Standard supply: HPW pump, intallation valve, high pressure dust suppression nozzles, washing pistol with 10m pressure hose.

Sistema de supresión de polvo a alta presión

Suministro estándar: Bomba HPW, válvula de control prioritario hidráulico, boquillas de supresión de polvo a alta presión, pistola de lavado con manguera de presión de 10 m.

System typeTipo de sistema

Water output power Potencia de salida del agua

Nozzles Boquillas

Dimensions Dimensiones

Weight Peso

Hydraulic input Entrada hidráulica

Pressure Presión

psi

Output Caudal US gpm

Piezas pcs.

(WxLxH)inch

lbsFlow

Caudal US gpm

Pressure Presión

psi

* Standard supply (suggested), increased number possible | Suministro estándar (sugerido), es posible incrementar el número

Suggested base machines/applications: Maquinaria base recomendada / aplicaciones:

(1) Mobile crushers, mobile screeners, breakers, drilling rigs, loaders, dumpers | Trituradores móviles, cribas móviles, martillos, plataformas de perforación, cargado-ras, volquetes(2) Mobile crushers, mobile screeners, crushing stations, demolition machinery | Trituradoras móviles, cribas móviles, estaciones de triturado, maquinaria de demolición(3) Crushing plants, Mobile screeners, dumpers, demolition machinery | Plantas trituradoras, cribas móviles, volquetes, maquinaria de demolición(4) Crushing plants, demolition machinery | Plantas trituradoras, maquinaria de demolición

Kit de supresión de polvo

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 30: Dynaset catalogue us spa

PRODUCT CATALOGUE 29

HPW-FIRE HIGH PRESSURE FIREFIGHTING SYSTEM

High pressure, ultra-fine water fog extinguishes fire without water damage:

BASE MACHINES: Fire engines and ladders, trucks, platform lifts, utility vehicles, ATVs, etc.

APPLICATIONS: Firefighting, foaming, cleaning, power washing, etc.

FEATURES: Complete kit with HPW piston-to-piston high pressure pump, foam mixer (0-6%) and multipurpose nozzle pistol: foam, fog and point nozzles in one tool. The system is powered by vehicle motor through hydraulic PTO: auxiliary power available for generators, power packs, CAFS compressors, etc.

SISTEMA DE EXTINCIÓN DE INCENDIOS A ALTA PRESIÓN

Alta presión, niebla de agua ultra fina extingue el fuego sin daños causados por

agua:

MÁQUINAS BASE: Camiones de bomberos y escaleras, camiones, elevadores de plataforma, vehículos utilitarios, ATVs, etc.

APLICACIONES: Extinción de incendios, extinción con espuma, limpieza, lavado a presión, etc.

CARACTERÍSTICAS: Conjunto completo con bomba de pistón-pistón de alta presión HPW, mezclador de espuma (0-6%) y pistola con boquilla multipropósito: espuma, niebla y boquilla puntual en una sola herramienta. El sistema es alimentado por el motor de un vehículo a través de una toma de potencia (PTO) hidráulica: Disponible energía auxiliar para generadores, fuentes de alimentación, compresores CAFS, etc.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 31: Dynaset catalogue us spa

30 PRODUCT CATALOGUE

HPP D16 FM2-00XX FLOW MULTIPLIER

HRU 800

Piercing nozzle

Fog nozzle

Dynaset Fire penetration tool makes firefighters work safer. High pressure water fog lowers fire temperature rapidly.

Foam nozzle

HPW fire fighting pistole kit

Las herramientas de penetración para extinción de incendios de Dynaset les hace a los bomberos trabajar más seguros. La niebla de agua a alta presión disminuye la temperatura del incendio rápida-mente.

Kit de pistola para extinción de incendios HPW

System type Tipo de sistema

Description Descripción

HPW fire fighting pistole, high flowPistola para extinción de incendios HPW, alto caudal

Triple fuction combi nozzle for flow rate over 16 gpm Triple función combi boquilla para caudal de más de 16 gpm

HPP 800-42Hydraulic low pressure fire pump, max 211 gpm, 116 psi, hydraulic flow requirement 11 gpmBomba de baja presión hidráulica para extinción de incendios, máximo 211 gpm, 116 psi, requerimiento de caudal hidráulico de 11 gpm

HPP 1200-70Hydraulic low pressure fire pump, max 317 gpm, 116 psi, hydraulic flow requirement 18.5 gpmBomba de baja presión hidráulica para extinción de incendios, máximo 317 gpm, 116 psi, requerimiento de caudal hidráulico de 18.5 gpm

HPP D16/23-125Hydraulic low pressure fire pump, max 502 gpm, 101 psi, hydraulic flow requirement 33 gpm Bomba de baja presión hidráulica para extinción de incendios, máximo 502 gpm, 101 psi, requerimiento de caudal hidráulico de 33 gpm

HRU 800 /2x5-45Closed circuit hydraulic-to-hydraulic power unit. It delivers 2x11 600 psi, 1.3 gpm of hydraulic power for rescue tools Circuito cerrado de unidad de potencia hidráulica-a-hidráulica. Entrega 2 salidas de 11 600 psi y 1.3 gpm de potencia hidráulica para herramientas de rescate

HPI 700/30-75Hydraulic-to-hydraulic power unit. HPI delivers 1x10 152 psi, 8 gpm of hydraulic power for rescue tools. Unidad de potencia hidráulica-a-hidráulica. El HPI entrega 1 salida de 10 152 psi y 8 gpm de poder hidráulico para herramientas de rescate

Foam injector Inyector de espuma

Adjustable foam content 0 - 6% Contenido de espuma ajustable de 0-6%

FPxx/xx-43Fire fighting penetration kitKit de penetración para extinción de incendios

High pressure firefighting penetration tool, water pressure 1 885 - 3190 psi, flow 8 - 24 gpm. Kit includes: penetration tool, HPW pump, and control unit Herramienta de penetración a alta presión para extinción de incendios, presión del agua de 1 885 - 3190 psi, caudal de 8 - 24 gpm. El kit incluye: herramienta de penetración, bomba HPW y unidad de control

Boquilla para espuma

Boquilla para niebla

Boquilla perforadora

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 32: Dynaset catalogue us spa

PRODUCT CATALOGUE 31

HDF

HDF 90HDF 40 HDF 180

HDF 40/40 - 8 580 10.6 2,6 0,2 12.4 x 7.5 x 6.7 17.6 2.1 3 000

HDF 180/23 - 35 2 600 6.1 7 1,18 9.7 x 6.3 x 6.7 17.6 9.2 3 000

HDF 90/150 - 85 1 300 40 23 0,52 14.6 x 6.9 x 9.7 66 22.5 3 000

HDF 160/70 - 90 2 300 18.5 19 1,12 13 x 8.7 x 7.1 60 24 3 000

HDF 200/40 - 55 2 900 10.6 13 1,26 11 x 5.9 x 8.3 33 14.5 3 000

HDF 200/250 - 280 2 900 66 85 1,06 29 x 10.6 x 14.2 375 74 3 000

HYDRAULIC DRILLING FLUID PUMP

Hydraulic piston-to-piston type drilling fluid pump:

BASE MACHINES: Drilling machines, pile driving rigs, stabilization machines, power packs, etc.

APPLICATIONS: Soil flushing, drill bit jetting, casing lubrication, bore stabilization, pressurising, etc.

FEATURES: Works with all drilling fluids: bentonite and polymer mixes, foaming agents, etc. Fluid solid content up to 25 %. Forged poppet valves, self-lubricating seals, no rotating parts. Adjustable pumping power from 0 to 100%.

Models

BOMBA HIDRÁULICA DE FLUIDO PARA PERFORACIONES

Bomba hidráulica de fluido para perforaciones tipo pistón-pistón:

MÁQUINAS BASE: Máquinas perforadoras, equipos para hincado de pilotes, máquinas estabilizadoras, fuentes de alimentación, etc.

APLICACIONES: Lavado de sedimentos, chorreo a brocas, lubricación de tuberías de revestimiento, estabilización y presurización de perforadores, etc.

CARACTERÍSTICAS: Trabaja con todos los tipos de fluidos para perforaciones: Bentonita y mezclas de polímeros, agentes espumantes, etc. Contenido sólido del fluido de hasta el 25%. Válvulas con asientos forjados, sellos auto-lubricantes, sin partes rotativas. Potencia de bombeo ajustable desde el 0 hasta el 100%.

Modelos

ModelModelo

Drilling fluid output power Potencia de salida del fluido de perforación

Pressure ratio Razón de presión

Dimensions Dimensiones

Weight Peso

Hydraulic input Entrada hidráulica

Pressure Preción

psi

Flow CaudalUS gpm

PowerPotencia

kW

Fluid/HydraulicsLíquido / Hidráulica

(WxLxH)inch

lbsMax

US gpmMax. psi

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 33: Dynaset catalogue us spa

32 PRODUCT CATALOGUE

JPL

JPL sample kit WHU -water heating unit

HTN bin wahing nozzle washes whole bin in 15s run

JPL-200-ST15-LK M 2 900 8 HPW 200/30-45 11.9 3000

JPL-200-ST15-LK-WHU * M 2 900 8 HPW 200/30-45 11.9 3000

JPL-2000-1500-180 A 2 600 24 HPW 180/90-115 30.4 3000

HIGH PRESSURE BIN WASHING SYSTEM

Automatic power washing of waste bins as a part of the emptying cycle:

BASE MACHINES: Waste compactor/collector trucks, refuse recycling machinery, etc.

APPLICATIONS: Bin washing at high pressure, recycling, garbage disposal, etc.

FEATURES: Range from hand pistol washers to automatic washing robots with 1 or 2 automatic washing heads. Hydraulic rotating tank cleaning nozzles. Patented washing water recycling system: enough water for 300 bins with typical bin cleaning time of 15 seconds.

Sample Configurations

Standard supply: Main components, HPW pump, nozzles, washing pistol, 20 m hose with reel. Water tank sold separately.

SISTEMA PARA LAVADO DE TANQUES (DE BASURA) A ALTA PRESIÓN

Lavado a presión automático de tanques de basura como parte de un ciclo de vaciado:

MÁQUINAS BASE: Camiones compactadores / recolectores de basura, maquinaria para reciclado, etc.

APLICACIONES: Lavado de contenedores de basura a alta presión, reciclaje, deposición de residuos, etc.

CARACTERÍSTICAS: Con un rango desde lavadores manuales de pistola hasta robots automáticos de lavado con 1 o 2 cabezas de lavado automáticas. Boquillas hidráulicas rotativas para la limpieza de tanques. Sistema patentado de reciclaje de agua de lavado: suficiente agua para 300 tanques con un tiempo de limpieza de 15 segundos de un tanque típico.

Configuraciones de muestra

Suministro estándar: Bomba HPW, boquillas, pistola de lavado, manguera de 64 ft con carrete. Tanque de agua se vende por separado.

Unit type Tipo de unidad

Operation Operación

Washing power Potencia de lavado

Pump type Tipo de bomba

Hydraulic input Entrada hidráulica

M: Manual Manual

A: Automatic Automático

Pressure PresiónMax psi

Flow CaudalUS gpm

Max

US gpmMax psi

* With Water heating unit

Con Unidad de calentamiento de agua

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 34: Dynaset catalogue us spa

PRODUCT CATALOGUE 33

HSP

HSP 600 HSP 1500 HSP 2600

HSP 4000 HSP 10000 HSP 16000

HSP 600/5-38 160 82 2 5.5 x 21.7 15.4 10 3 800 1/2 1/2 -

HSP 1500/5-40 530 82 3 13.8 x 27.6 33 10.6 2 600 1/2 1/2 -

HSP 2600/5-50 900 98 5 17.7 x 35.4 44 13.2 3 600 1/2 3/4 -

HSP 4000/5-100 1320 98 5 17.7 x 35.4 99 26.4 3 600 1/2 3/4 -

HSP 7000/5-169 2100 115 5 17.7 x 35.4 119 44.6 6 000 3/4 3/4 3/8

HSP 10000/5- 200 3170 115 6 19.7 x 43.3 154 52.8 6 000 3/4 3/4 3/8

HSP 16000/5-317 5280 115 8 25.6 x 49.2 187 84 6 000 1 1 3/8

HYDRAULIC SUBMERSIBLE PUMP

Submersible pumps for fast and efficient pumping with hydraulic power:

BASE MACHINES: Tractors, cranes, excavators, dredgers, boats, etc.

APPLICATIONS: Pumping fluids and slurries from trenches, quarries, construction sites, buildings, sewers, etc. Dredging and flood prevention.

FEATURES: High volume and head, adjustable impeller speed. Fully encased motor and self-lubrication for reliability.

Models

BOMBA HIDRÁULICA SUMERGIBLE

Bomba sumergible para un rápido y eficiente bombeo con energía hidráulica:

MÁQUINAS BASE: Tractores, grúas, excavadoras, dragas, botes, etc.

APLICACIONES: Bombeo de fluidos y lodos de zanjas, canteras, obras de construcción, edificios, alcantarillas, etc. Dragados y prevención de inundaciones.

CARACTERÍSTICAS: Alto volumen y altura de bombeo, velocidad del impulsor ajustable. Motor totalmente encerrado y auto-lubricado para su fiabilidad.

Modelos

ModelModelo

Output Salida

HeadAltura

Hose Manguera

Dimensions Dimensiones

Weight Peso

Hydraulic input Entrada hidráulica

Hydraulic connections Conexiones hidráulicas

MaxUS gpm

Maxft

Diameter Diámetro

inch

(WxH)inch

No hoseSin manguera

lbs

Flow CaudalUS gpm

Max pressurePresión Máx

psi

Pressure Presión

Return Retorno

Overflow Exceso de flujo

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 35: Dynaset catalogue us spa

34 PRODUCT CATALOGUE

HPW

HPW

200

HPW

420

HPW

220

HPW

520

HPW

90

HPW

180

HPW

460

HPW

130

HPW

800

HPW

100

0

HPW

300

HPW

120

0

HPW

160

0

• •

• •

• •

• • • •

• • • • • • • • • •

• • • • • • • • • •

• • • • • • • • • •

• • • • •

• •

• • • • •

ACC ACCESSORIES

Carry handleAsa de transporte

Simple carry handle for handlingAsa de transporte simple para traslados

Detergent injectorInyector de detergente

Injector with R3/8” coupling. Adjustable mixing ratio.Inyector con acople de 3/8”. Razón de mezclado ajustable.

ST15-SW-xxx-25xxWash pistolPistola para lavado

Flow 13.2 US gpm, Pressure 4 500 psi, 31.5 or 47.2 inch long, complete setCaudal de 13.2 US gpm, presión hasta 4 500 psi, 31.5 o 47.2 inch, completo

ST15-ST53-25xxWash pistolPistola para lavado

Duplex spraying pipe, regulation knob, length 47.2 inchTubería aspersor doble, pomo regulador, longitud de 47.2 inch.

RL100-xxx-25xxWash pistolPistola para lavado

Flow 26.4 US gpm, Pressure 1 800 psi, 31.5 inch long, complete Caudal de 26.4 US gpm, presión hasta 1 800 psi, 31.5 inch, completo

ST30-1000-25xxWash pistolPistola para lavado

Flow 21.1 US gpm, Pressure 8 700 psi, 39.4 inch long, complete Caudal de 21.1 US gpm, presión hasta 8 700 psi, 39.4 inch, completo

SP1000-800-00xx Wash pistolPistola para lavado

Flow 21.1 US gpm, Pressure 14 500 psi, 31.5 inch long, completeCaudal de 21.1 US gpm, presión hasta 14 500 psi, 31.5 inch, completo

Pressure hose, 32 ft Manguera de presión, 32 ft

Available with variety of connectors, sizes and pressure versions Disponible con gran variedad de conectores, versiones de tamaños y presiones

Pressure hose, 64 ft Manguera de presión, 64 ft

Available with variety of connectors, sizes and pressure versions Disponible con gran variedad de conectores, versiones de tamaños y presiones

Pressure hoseManguera de presión

Available with variety of connectors, sizes and pressure versionsDisponible con gran variedad de conectores, versiones de tamaños y presiones

PVC19-3m-STR70Suction hoseManguera de succión

Suction hose 10 ft + filter 3/4”, 8 US gpm, claw couplingManguera de succión de 3 m + filtro de 3/4”, 8 US gpm, acople rápido

PVC25-3m-STR70Suction hoseManguera de succión

Suction hose 10 ft + filter 1”, 13.2 US gpm, claw couplingManguera de succión de 3 m + filtro de 1”, 13.2 US gpm, acople rápido

PVC32-3m-STR100Suction hoseManguera de succión

Suction hose 10 ft + filter 1 1/4” , 23.8 US gpm, claw couplingManguera de succión de 3 m + filtro de 1 1/4”, 23.8 US gpm, acople rápido

CA 7105- R 3/4Suction filterFiltro de succión

Suction filter, 80 mesh, 8 US gpmFiltro de succión, 80 mesh, 8 US gpm

CA 7106- R 1 Suction filterFiltro de succión

Suction filter 80 mesh 13.2 US gpmFiltro de succión, 80 mesh, 13.2 US gpm

ACCESORIOS

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 36: Dynaset catalogue us spa

PRODUCT CATALOGUE 35

HPW

HPW

200

HPW

420

HPW

220

HPW

520

HPW

90

HPW

180

HPW

460

HPW

130

HPW

800

HPW

100

0

HPW

300

HPW

120

0

HPW

160

0

• •

• • • • • • • • • •

• • •

• • • •

• •

• • • • • • • • • • •

• • •

• • •

• • • •

• • •

• • • • • • •

• • • •

CA 7107- R 1 1/4Suction filterFiltro de succión

Suction filter, 80 mesh, 23.8 US gpmFiltro de succión, 80 mesh, 23.8 US gpm

CA 7108- R 1 1/2Suction filterFiltro de succión

Suction filter, 80 mesh, 40 US gpm Filtro de succión, 80 mesh, 40 US gpm

CA 7109- R 2Suction filterFiltro de succión

Suction filter, 80 mesh, 53 US gpm Filtro de succión, 80 mesh, 53 US gpm

MEGxxxxBoquilla para rociadoSpraying nozzle

Spraying nozzle MEG - 1/4” point (0 °) / fan, 15 ... 65°, std. 25° Boquilla rociadora tipo MEG – punta de 1/4”, 0°, 15... 65°. std 25°

MT10xxJet cutting nozzleBoquilla para corte tipo jet

Water cutting nozzle, sharp point spray Boquilla para corte con agua, rociador con punta fuerte

ST357-xxxRotating turbo nozzleBoquilla rotativa turbo

Rotating turbo nozzle, 2 900 psi Boquilla rotativa turbo, 2 900 psi

DPA350-xxxRotating turbo nozzleBoquilla rotativa turbo

Rotating turbo nozzle, 5 100 psi Boquilla rotativa turbo, 5 100 psi

DPA500-xxxRotating turbo nozzleBoquilla rotativa turbo

Rotating turbo nozzle, 5250 psi Boquilla rotativa turbo, 5250 psi

F3-800-xxxRotating turbo nozzleBoquilla rotativa turbo

Rotating turbo nozzle, 11 500 psiBoquilla rotativa turbo, 11 500 psi

F2-1000-xxxRotating turbo nozzleBoquilla rotativa turbo

Rotating turbo nozzle, 14 500 psi Boquilla rotativa turbo, 14 500 psi

HN1600Rotating swivel head nozzleBoquilla rotativa con cabeza giratoria

For washing, hydroscaling and roadmark removalPara lavado, desincrustación por agua y remoción de señalización vial

HRN-10-Hydraulic rotating nozzle Boquilla hidráulica rotativa

Rotating washing and dust binding nozzle Boquilla giratoria para lavado y fijación de polvo

HBN-10-Hydraulic brush nozzleBoquilla hidráulica para cepillar

Effective washing with small water consumption Lavado efectivo con bajo consumo de agua

HTN-10-3DHydr. 3D container washerLavador hidráulico 3D de contenedores

For Bin washing Para lavado de contenedores de basura

ST55-060 Sandblasting attachment Accesorio para limpieza con chorro de arena

For 5.3 US gpm flow, 2 900 psi pressurePara caudal de 5.3 US gpm y presión de 2 900 psi

DPA2504xx Sandblasting attachment Accesorio para limpieza con chorro de arena

For 7.9 US gpm flow, 6 525 psi pressurePara caudal de 7.9 US gpm y presión de 6 525 psi

LK9021-20mHose reelCarrete de manguera

64 ft, max 8000 psi, spring reel-in, with automatic latch, without hose64 ft, 8000 psi bar máx., carrete de resorte, con seguro automático, no incluye manguera

LK9021-20m -RSTHose reel, Stainless steelCarrete de manguera

Stainless steel, 64 ft, max 2 900 psi , spring reel-in, with automatic latch, without hoseDe acero inoxidable, 64 ft, 2 900 psi máx., carrete con resorte, con seguro au-tomático, no incluye manguera

More special equipments available - Ask more from your sales contact.Disponible más equipos especiales. Pregunte a su contacto de ventas.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 37: Dynaset catalogue us spa

36 PRODUCT CATALOGUE

PPL

HPW

200

HPW

420

HPW

220

HPW

520

HPW

90

HPW

180

HPW

460

HPW

130

HPW

800

HPW

100

0

HPW

300

HPW

120

0

HPW

160

0

• •

• •

• • • • • • •

• • • • • • •

KPL

HPW

200

HPW

420

HPW

220

HPW

520

HPW

90

HPW

180

HPW

460

HPW

130

HPW

800

HPW

1000

HPW

300

HPW

1200

HPW

160

0

• •

• •

• • •

• • • • • • • • • • •

• • • • • • • • • • •

• • • • • • • • • • •

LKH600-xxx-160Hydraulic hose reelCarrete hidráulico para manguera

164 - 394 ft, hydraulic, control valves, rotating coupling, without hose 164 - 394 ft, hidráulica, válvulas de control, acoples rotativos, no incluye manguera

LKH500-xxx-160Hydraulic hose reelCarrete hidráulico para manguera

164 - 328 ft, hydraulic, control valves, rotating coupling, without hose164 - 328 ft, hidráulica, válvulas de control, acoples rotativos, no incluye manguera

ST49Pipe cleaning nozzleBoquilla para limpieza de tuberías

Flow 6.6 US gpm, pressure 2 900 psi, economic basic nozzleCaudal de 6.6 US gpm, presión de 2 900 psi, boquilla económica básic

ST49-RPipe cleaning nozzleBoquilla para limpieza de tuberías

Rotating, 6.6 US gpm, 2 900 psi, for subsurface drainsRotativa, 6.6 US gpm, 2 900 psi, para drenajes superficiales

Pipe cleaning nozzle Boquilla para limpieza de tuberías

For flowrate 6.6 - 23.8 US gpmPara caudal de 6.6 - 23.8 US gpm

De-icing nozzle Boquilla para deshielo

For flowrate 6.6 - 23.8 US gpm Para caudal de 6.6 - 23.8 US gpm

VRE35-10xxRoot cutter Cortador de raíz

3/4”, 23.8 US gpm, 2 600 psi bar, with rotating chains 3/4”, 23.8 US gpm, 2 600 psi, con cadenas rotativas

More special equipments available - Ask more from your sales contact.Disponible más equipos especiales. Pregunte a su contacto de ventas.

KPxxx-9x6501-D27Street washing pipeTubería para lavado de calles

9 nozzles, 7.9 US gpm, 2 900 psi, L= 3’11” ... 5’5” 9 boquillas, 7.9 US gpm, 2 900 psi, L=3’11”…5’5”

KPxxx-9x6502-D33Street washing pipeTubería para lavado de calles

9 nozzles, 13.2 US gpm, 2 610 psi, L= 5’5” ... 6’7” 9 boquillas, 13.2 US gpm, 2 610 psi, L=5’5”…6’7”

KPxxx-11x6506-D33Street washing pipeTubería para lavado de calles

11 nozzles, 39.6 US gpm, 1305 psi, L= 5’5” ... 9’2”11 boquillas, 39.6 US gpm, 1305 psi, L=5’5”…9’2”

HBN-10-Hydraulic brush nozzleBoquilla hidráulica para cepillar

Effective Street washing with small water consumption Lavado efectivo de calles con bajo consumo de agua

3-way flow control valve Válvula 3 vías para control de caudal

Installed on Street cleaning unit Instalado en la unidad para lavado de calles

Water cistern, plastic Cisterna de agua, plástica

Volume 132... 264 US galVolumen de 132…264 US gal

Rear light kit Kit de luces traseras

For KPL street washing units without water cistern Para unidades KPL para lavado de calles sin cisterna de agua

More special equipments available - Ask more from your sales contact.Disponible más equipos especiales. Pregunte a su contacto de ventas.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 38: Dynaset catalogue us spa

PRODUCT CATALOGUE 37

HPW-FIRE

HPW

200

HPW

420

HPW

220

HPW

520

HPW

90

HPW

180

HPW

460

HPW

130

HPW

800

HPW

100

0

HPW

300

HPW

120

0

HPW

160

0

• •

• • •

• • • •

GENERAL

HPW

200

HPW

420

HPW

220

HPW

520

HPW

90

HPW

180

HPW

460

HPW

130

HPW

800

HPW

100

0

HPW

300

HPW

1200

HPW

160

0

• •

• •

• •

• • • • • •

• • • •

HPW Fire fighting pistol, Low FlowPistola para extinción de incendios HPW, bajo caudal

3-functional fire fighting pistol, under 16 US gpmPistola para extinción de incendios con 3 funciones, menos de 16 US gpm

HPW Fire fighting pistol, Hi Flow Pistola para extinción de incendios HPW, alto caudal

3-functional fire fighting pistol, over 16 US gpmPistola para extinción de incendios con 3 funciones, más de 16 US gpm

HPW200 Fire fighting pistol kit Kit para pistola para extinción de incendios HPW200

2 900 psi, 7.9 US gpm, Handle, piercing, fog and foam nozzle wiht quick coupling. De 2 900 psi, 7.9 US gpm, asa, penetrante, boquilla de niebla y espuma con acople rápido

HPW220 Fire fighting pistol kit Kit para pistola para extinción de incendios HPW220

3 200 psi, 13.2 US gpm, Handle, piercing, fog and foam nozzle wiht quick coupling. De 3 200 psi 13.2 US gpm, asa, penetrante, boquilla de niebla y espuma con acople rápido

HPW130 Fire fighting pistol kit Kit para pistola para extinción de incendios HPW130

1 900 psi, 47.6 US gpm, Handle, piercing, fog and foam nozzle wiht quick coupling. De 1 900 psi, 47.6 US gpm, asa, penetrante, boquilla de niebla y espuma con acople rápido

HPW180 Fire fighting pistol kit Kit para pistola para extinción de incendios HPW180

2 600 psi, 23.8 US gpm, Handle, piercing, fog and foam nozzle wiht quick coupling. De 2 600 psi, 23.8 US gpm, asa, penetrante, boquilla de niebla y espuma con acople rápido

FM2-00xxFlow multiplierMultiplicador de caudal

158 US gpm, 116 psi, High flow pumping with HPW, injector principle De 158 US gpm, 116 psi, bombeo de gran caudal con HPW, principio de inyector

More special equipments available - Ask more from your sales contact.Disponible más equipos especiales. Pregunte a su contacto de ventas.

WHU 110-12VWater heating unit Unidad para calentamiento de agua

Water pressure 2 900 psi, 110kW (6.6 US gpm ∆T= 136 °F), diesel powered, 12V Presión de agua de 2 900 psi, 110 kW (6.6 US gpm ΔT=136 °F), funciona con diesel, 12V

WHU 110-24VWater heating unit Unidad para calentamiento de agua

Water pressure 2 900 psi, 110kW (6.6 US gpm ∆T=136 °F), diesel powered, 24V Presión de agua de 2 900 psi, 110 kW (6.6 US gpm ΔT=136 °F), funciona con diesel, 24V

WHU70 high pressureWater heating unit Unidad para calentamiento de agua

Water pressure 7 300 psi, 70kW (7.9 US gpm ∆T=91°F), diesel powered, 12/24V Presión de agua de 7 300 psi, 70 kW (7.9 US gpm ΔT=91°F), funciona con diesel, 12/24V

MP1”-xx-R3/8Mud and filling pumpBomba para lodos y llenado

53 US gpm ,Injector 1”, without hose De 53 US gpm, inyector de 1”, sin manguera

Filter for MP1 Filtro para MP1

Strainer for MP1” Mud pump / filling pump Colador para bomba de lodos y llenado MP1”

MP2”-xx-R1/2Mud and filling pumpBomba para lodos y llenado

132 US gpm, Injector 2”, strainer, without hose De 132 US gpm, inyector de 2”, colador, sin manguera

FM2-00xxFlow multiplierMultiplicador de caudal

158 US gpm, 116 psi, High flow pumping with HPW, injector principle158 US gpm, 116 psi, bombeo de gran caudal con HPW, principio de inyector

More special equipments available - Ask more from your sales contact.Disponible más equipos especiales. Pregunte a su contacto de ventas.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 39: Dynaset catalogue us spa

38 PRODUCT CATALOGUE

INFO COMPRESSED AIR

Pneumatic tools and attachments need high quality compressed air as a power source, but compressed air

is also needed in demanding conditions such as in mining, quarrying etc.

DYNASET hydraulic compressors are the most compact complete air compressor with integrated tank, oil separator and automatic unloader and works most reliably in all machines and vehicles.

High power air flushing for drilling rigs in hydraulic excavators or tire filling from service vans, pressurizing hydraulic breakers against water or dust, cleaning coolers and filters in crushers and farming machines as well all pneumatic tools etc. work with hydraulic power source with Dynaset HK or HKL compressor.

Compared to typical compressor trailer unit, the DYNASET Hydraulic compressors take no space at work site. They are mounted to the workin machine, service free and always available.

Las herramientas neumáticas y sus accesorios necesitan aire comprimido de alta calidad como fuente de alimentación,

pero también el aire comprimido es necesario en condiciones exigentes como en la minería, canteras, etc.

DYNASET es el más compacto compresor de aire completo con su tanque integrado, separador de aceite y descargador automático y trabaja de forma confiable en todas las maquinarias y vehículos.

Descarga de aire de alto poder para máquinas de perforación en excavadoras hidráulicas o llenado de neumáticos desde furgonetas de servicio, presurización de martillos hidráulicos contra agua y polvo, enfriadores de limpieza y filtros en trituradores y maquinarias para agricultura así como todas las herramientas neumáticas, etc. Trabaje con su fuente de energía hidráulica usando los compresores HK o HKL de Dynaset.

En comparación al típico compresor con remolque, el compresor hidráulico de DYNASET no ocupa espacio en el sitio de trabajo. Son instalados en la máquina de trabajo, sin mantenimiento y siempre disponible.

AIRE COMPRIMIDO

Page 40: Dynaset catalogue us spa

PRODUCT CATALOGUE 39

HK/HKL/HKR HYDRAULIC COMPRESSOR

Compressed air in compact and reliable package, for all work machines:

BASE MACHINES: Mining machines, excavators, loaders, tractors, trucks, platform lifts, crushers, harvesters, vehicles, fire engines, rescue and service vehicles, etc.

APPLICATIONS: Powering pneumatic tools, filling tires, air flushing in drilling rigs, purge air protection and cleaning of equipment, CAFS foam generation, etc.

FEATURES: Reliable piston and rotary vane compressors available. Easy installation with integrated speed control, pressure control and unloader. Complete with frame integrated air tank.

COMPRESOR HIDRÁULICO

Aire comprimido en una unidad compacta y fiable, para toda maquinaria de trabajo:

MÁQUINAS BASE: Maquinaria para minería, excavadoras, palas cargadoras, tractores, camiones, elevadores de plataforma, trituradoras, segadoras, vehículos, camiones de bomberos, vehículos de rescate y servicio, etc.

APLICACIONES: Alimentación de herramientas neumáticas, llenado de neumáticos, limpieza de equipos, descarga de aire en máquinas de perforación, protección contra agua y polvo de martillos neumáticos, generación de espuma (CAFS), etc.

CARACTERÍSTICAS: Disponible compresor de pistón y el de paletas. Fácil instalación. Completo con tanque de aire integrado en el marco.

Page 41: Dynaset catalogue us spa

40 PRODUCT CATALOGUE

HK 450 HK 1000 HKL 400 HKL 5000HKL 1300 HKL 7500 HKR 2500 HKR 5000

HK 450/8-23 16 116 17 x 20.9 x 18.1 81 3.7 1900 3000

HK 1000/12-35 35 175 19.3 x 28.5 x 25.8 176 9.2 2 500 3 000

HKL 400/8-24 14 115 * 9.8 x 22.7 x 12.3 66 6.3 2 500** 3 600

HKL 801/8-26-OE 28 115 * 12.6 x 21.3 x 25.2 121 6.9 2 800 3 600

HKL 1300/8-38-OE 45 115 * 12.6 x 20.5 x 25.2 121 10 3 000 3 600

HKL 1300/8-46-OE 45 115 * 12.6 x 20.5 x 25.2 121 12 2 500** 3 600

HKL 1800/8-46-OE 63 115 * 15.4 x 31 x 24.4 227 12 3 000 3 600

HKL 2600/8-65-OE 92 115 * 15.4 x 31.9 x 24.4 227 17 3 000 3 600

HKL 2600/8-85-OE 92 115 * 15.4 x 31.9 x 24.4 227 22.5 2 500** 3 600

HKL 4100/8-113-OE 145 115 * 20.3 x 35 x 31 408 29.8 2 900 3 600

HKL 5000/8-135-OE 176 115 * 20.3 x 35 x 31 408 35.6 2 600 3 600

HKL 7500/8-176+12-OE 265 115 * 35 x 43.3 x 35.4 728 49.7 3 200 3 600

HKR 1300/10-37 45 145 18x19.3x16.7 74 10 3000 4060

HKR 2000/10-53 70 145 18x19.3x16.7 74 14 2900 4060

HKR 2500/10-67 88 145 18x19.3x16.7 74 17.7 2900 4060

HKR 4000/10-104 141 145 20.5x24.2x28 137 27.5 2900 3330

HKR 5000/10-137 176 145 20.5x24.2x28 137 36 2900 3330

Models

Standard supply HK: automatic speed control valve, air pressure control with unloader, pressure meter, air tank.Standard supply HKL: automatic speed control (up to HKL 1800), cooler, oil separator, unloader automatics, solenoid control valve for off-load valve (not in HKL 400)Standard supply HKR: Automatic speed control, cooler, oil separator, unloader valve, intake filter

Modelos

Suministro estándar HK: válvula automática para control de velocidad, control de presión de aire con descargador, manómetro, tanque de aire.Suministro estándar HKL: control de velocidad automático (hasta HKL1800), enfriador, separador de aceite, descargador automático, válvula solenoide de control para válvula sin carga (no en HKL400)

ModelModelo

Compressed air Aire comprimido

DimensionsDimensiones

WeightPeso

Hydraulic input Entrada hidráulica

ISO 1217cfm

psi(WxLxH)

Inchlbs

FlowCaudalUS gpm

Pressure (operating) Presión (en operación)

Min. psi

PressurePresión

Max. psi **

* Available up to 188 psi / 13 bar by request | Disponible por pedido hasta 188 psi / 13 bar** Low pressure 2500 psi / 170 bar models available by request | Disponible por pedido modelos de baja presión de 2500 psi / 170 bar

Page 42: Dynaset catalogue us spa

PRODUCT CATALOGUE 41

HK / HKL

HK 4

00

HK 10

00

HKL 4

00

HKL 8

01

HKL 1

300

HKL 2

600

HKL 4

100

HKL5

000

HKL 7

500

• •

• •

• •

ACC ACCESSORIES

Cyclone filter Filtro tipo ciclón

Pneumatic stopping automation Automatización detener pneumatic

Electric stopping automationAutomatización detener eléctrico

More special equipments available - Ask more from your sales contact.Disponible más equipos especiales. Pregunte a su contacto de ventas.

ACCESORIOS

Page 43: Dynaset catalogue us spa

42 PRODUCT CATALOGUE

INFO

PV-SAE

PC-SAE

LSV

Dynaset for easy installation and guaranteed reliability. Dynaset PV SAE priority valve takes the correct oil flow

from the main pump with bolt-on sandwich flange.

Dynaset hydraulic PTO takes power out of truck, van, ship, ATV etc engines up to 6500 rpm.

Dynaset is familiar with all hydraulic systems and has experience of main machine brands in the World.

Dynaset hydraulic vibra pump HVB vibrates the excavator bucket cylinder boosting penetration for use as a breaker, vibrator plate etc. Dynaset HV hydraulic winch is excellent for pulling long underground pipelines etc. HEU expands Swellex-type tunnel and mine pre-reinforcing bolts with 320 bar water cost effectively. HRU gives 2x800 bar power for rescue tools. HPI intensifiers the pressure up top 700bar. Etc.

Any machine with sufficient power can be used as a hydraulic power source. Hydraulic power can be converted to multiple outputs with DYNASET technology - to make new kind of innovative products. This and much more, You will benefit from co-operation with DYNASET.

HYDRAULIC KNOW-HOW

Los productos DYNASET son de fácil instalación y garantizada confiabilidad. La válvula prioritaria PV SAE de Dynaset toma el

caudal de aceite correcto de la bomba principal utilizando ¿? brida.

La toma de potencia hidráulica (PTO) de Dynaset toma el poder fuera del motor de camiones, furgonetas, barcos, ATVs, etc. hasta 6500 rpm. Dynaset está familiarizado con todos los sistemas hidráulicos y tiene comprobada experiencia en cada una de las marcas de maquinarias en el mundo.

La bomba vibratoria HVB de Dynaset hace vibrar el cilindro del cubo de excavadoras incrementando la penetración para ser usado como martillo, placa vibratoria, etc. El malacate hidráulico HV de Dynaset es excelente para el halado de largas tuberías subterráneas, etc. El equipo HEU expande túneles tipo Swellex y pernos para pre-reforzado de minas de manera rentable con agua a 320 bar. El equipo HRU proporciona 2 salidas de 800 bar cada una para alimentar herramientas de rescate. El equipo HPI intensifica la presión hasta 700bar.

Cualquier maquinaria con suficiente poder puede ser usada como fuente de alimentación hidráulica. La energía hidráulica puede ser convertida en múltiples salidas con la tecnología de DYANSET – para hacer un nuevo tipo de productos innovadores. Esto y mucho más, usted puede beneficiarse de la cooperación con Dynaset.

CONOCIMIENTO TÉCNICO DE HIDRÁULICA

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 44: Dynaset catalogue us spa

HHK 200-12 3000 7.9 ½ - 1 ¼ 1 ¼ 10.4 x 11.9 x 7.87 27.3 3.2 3045

HHK 200-17 3000 7.9 ½ - 1 ¼ 1 ¼ 10.4 x 11.9 x 7.87 27.3 4.5 3045

PRODUCT CATALOGUE 43

HHK

HHK

HYDRAULIC GRINDER

Complete grinding tool with automatic speed control is the only reliable grinder for dirty and wet environment:

BASE MACHINES: Rock drilling machines, geology rigs, forest machinery, etc

APPLICATIONS: Servicing drilling bits, sharpening the tools in forestry, farming and drilling tools, etc .

FEATURES: Automatic speed control for cons-tant grindstone rotation speed. EN 13218 safety equipment, dust suction connection. Easy installation to any hydraulics. Grindstone changing with just one tool.

Models

Standard supply: Automatic rotations speed control, adjustable grinding support, grindstone shield.

ESMERILADORA HIDRÁULICA

Completa herramienta esmeriladora con control automático de velocidad, es la única esmeriladora fiable

para ambientes sucios y húmedos:

MÁQUINAS BASE: máquinas perforadoras de rocas, equipos de geología, maquinaria para silvicultura, etc.

APLICACIONES: Mantenimiento de taladros de perforación, afilado para silvicultura, geología, herramientas de labranza, taladros, etc.

CARACTERÍSTICAS: Control automático de velocidad para velocidad constante de rotación del esmeril. Fácil instalación en cualquier equipo hidráulico – tolera grandes contrapresiones. Cambio de la piedra de amolar con sólo una herramienta.

Modelos

Suministro estándar: Válvula automática para control de velocidad, soporte ajustable del esmeril, protector de la piedra de amolar.

Unit typeTipo de unidad

SpeedVelocidad

GrindstonePiedra de amolar

Dimensions Dimensiones

WeightPeso

Hydraulic input Entrada hidráulica

rpmØ

inch

Width Ancho

inch

ShaftAgujeroØ inch

(WxLxH)inch

lbs US gpmMax.psi

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 45: Dynaset catalogue us spa

HV 5 t - 50* 5 (5.5) 30 720 0.47 29.5 x 29.5 x 30.3 771 13..2 2 900

HV 10 t - 60* 10 (11) 21 557 0.55 33 x 40 x 52 1390 15.9 2 900

HV 20 t - 120* 20 (22) 25.6 590 0.7 33 x 40 x 52 1480 31.7 2 900

HVY 5 t - 9,5 kW** 5 (5.5) 30 720 0.47 25.5 x 37 x 45.3 1190 13..2 2 900

HVY 10 t - 13 kW** 10 (11) 21.3 557 0.55 33 x 40 x 52 1764 15.9 2 900

HVY 20 t - 13 kW** 20 (22) 21.3 590 0.7 33 x 40 x 52 1852 31.7 2 900

HVY 30 t - 36 kW** 30 (33) 39.4 2300 0.87 63.8 x 63.9 x 94.5 9480 52.8 3 625

44 PRODUCT CATALOGUE

HV ⁄ HVY

HVY 5T HVY 20T HVY 30T

HYDRAULIC WINCH / WINCH UNIT

Most economical winch unit for over 150m pulling. Compact design with reliable planet-

chain hydraulic motor drive.

BASE MACHINES: Construction and maintenance machinery, self-standing unit.

APPLICATIONS: Trenchless construction of oil, gas, water, waste, etc. pipe lines. Pipe bursting, replacement and repair.

FEATURES: Support boom to quide pulling force to the reel for more efficiency. Compact and lightweight design. Fully adjustable pulling force and speed.

Models

MALACATE HIDRÁULICO

El malacate más económico para halar más de 150 m. Diseño compacto con fiable manejo por

cadena con motor hidráulico.

Máquinas Base: Maquinaría de construcción y mantenimiento, unidad independiente.

Aplicaciones: Construcción de líneas de aceite, gas, agua, residuos, etc. sin abrir zanjas. Ruptura, reemplazo y reparación de tuberías.

Características: Brazo de soporte para dirigir la fuerza de halado al riel para mejor eficiencia. Diseño compacto y liviano. Velocidad y fuerza de halado completamente ajustables.

Modelos

ModelModelo

Pulling power Po-tencia de halado

Pulling speed Velocidad de

halado

Wire Cables

Dimensions Dimensiones

Weight Peso

Hydraulic input Entrada hidráulica

metric tons(short tons)

Max.ft/min

LongitudLength

ft

Øinch

(WxLxH) lbsMax.

US gpmMax. psi

* Connection to work machines’s hydraulics | Conexión al sistema hidráulico de la maquinaria** Complete with hydraulic power pack, petrol engine, electric start | Completo con fuente de alimentación hidráulica, motor de gasolina, encendido eléctrico

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 46: Dynaset catalogue us spa

PRODUCT CATALOGUE 45

HPT

HPU HRU HEU HPI

HYDRAULIC POWER UNIT TECHNOLOGY

Specialized hydraulic power unit technology for demanding applications:

BASE MACHINES: Rescue vehicles, demolition equipment, mining machinery and hydraulic supports, test rigs, etc.

FEATURES: Compact heavy duty units, special features. Dynaset HPU power units bring hydraulic power to every work site. HEU features fully automatic operation with automated expansion pressure hold for easy operation in tunneling works. HRU generates hydraulic power for rescue tools through separate low viscosity oil in output side. HPI powers all high pressure hydraulic tools with up 700 bar pressure.

Power unit types

UNIDAD HIDRÁULICA DE POTENCIA

Unidad especializada de potencia hidráulica con tecnología para aplicaciones demandantes:

MÁQUINAS BASE: Vehículos de rescate, equipos de demolición, maquinaria para minería y soportes hidráulicos, equipos de prueba, etc.

APLICACIONES: Ver la tabla siguiente para más información.

CARACTERÍSTICAS: Unidades compactas de alta durabilidad, características especiales. Una ventaja del HEU es su operación completamente automática con espera de expansión de presión automatizada. El HRU genera potencia hidráulica para herramientas separadas en la salida con aceite de baja viscosidad.

Tipos de unidades de potencia

ModelModelo

Hydraulic inputEntrada hidráulica

Hydraulic outputSalida hidráulica

Weight Peso

Description Descripción

US gpm psiUS

gpmMaxbar

lbs

HPU B.S. 18-38 - - 10OilAceite3 045

227Power pack with 18 hp petrol engine, electric start. Unidad de potencia con motor de gasolina de 18 hp, encendido eléctrico.

HRU 800/2x5-45 11.9 3 0452x1.32

OilAceite11 600

35Hydraulic power source for rescue tools, Two high pressure outputs with separet oil. Fuente de alimentación hidráulica para herramientas de rescate, dos salidas de alta presión con aceite separados.

HEU 320-40 2.6-10.6246 - 4 350

5.28WaterAgua4 640

79Hydraulic expansion unit for tunnel wall reinforcement with Swellex-type anchors. Unidad de expansión hidráulica para el reforzamiento de paredes de túneles con anclajes tipo Swellex.

HPI 700/30-75 19.8 4 640 7.9OilAceite10 150

31Hydraulic pressure intensifier for powering tools, pressure testing, etc.Intensificador hidráulico de presión para alimentar herramientas, pruebas de presión, etc.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 47: Dynaset catalogue us spa

HVB 350/ 9-40 0 - 5 (0 - 5.5) 5 075 5.5 30 5 9.6 x 4.3 x 6.1 28.7

HVB 350/ 18-60 5 - 10 (5.5 - 11) 5 075 11 23 5.8 9.6 x 4.3 x 6.1 28.7

HVB 350/ 27-80 10 - 15 (11 - 16.5) 5 075 16.5 19 7.4 9.6 x 4.3 x 6.1 28.7

HVD 55 / 30-24 18 3045 6.3 55 3.2 x 4.5 x 8.9 28.7

46 PRODUCT CATALOGUE

HVB/HVD

HVB 350 HVD

HYDRAULIC VIBRA

Hydraulic vibra - vibration effect added to a standard bucket:

BASE MACHINES: Excavators, earth moving machines, loaders, dumpers, tippers, etc.

APPLICATIONS: Enhanced penetration to hard, stony or frozen ground. Enhanced bucket emptying for sticky substances (mud, snow, etc). Compacting sand, soil, dirt, snow, waste, etc.

FEATURES: Compact piston-to-piston pump sets excavators cylinders to fast back-and-forth movement. Adjustable vibration at 0-30 Hz. Easy installation to boom hydraulics.

BOMBA HIDRÁULICA VIBRATORIA

Bomba vibratoria – efecto adicional de vibración a un cubo estándar:

MÁQUINAS BASE: Excavadoras, maquinaria para movimiento de tierra, palas cargadoras, dúmperes, volquetes, etc.

APLICACIONES: Mejora la penetración en terrenos duros, rocosos o congelados. Mejora el vaciado de los cubos de sustancias pegadizas (lodo, nieve, etc). Compactación de arena, suelo, tierra, nieve, desechos, etc.

CARACTERÍSTICAS: Bomba compacta de pistón-pistón da a los cilindros un rápido movimiento de vaivén. Vibración ajustable de 0 a 30 Hz. Fácil instalación a la hidráulica del cubo.

Unit type Tipo de unida

Base machine Maquinaria base

Hydraulic specificationEspecificaciones hidráulicas

Frequency Frecuencia

Dimensions Dimensiones

Weight Peso

Size Tamaño

metric tons (short tons)

Input Entrada Max psi

Output displacement

Salida cu inch

MaxUS gpm

Max Hz(WxLxH)

inchlbs

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Unit typeTipo de unida

Force Hydraulic specificationEspecificaciones hidráulicas

FrequencyFrecuencia

DimensionsDimensiones

WeightPeso

kNPressurePressionMax bar

FlowCaudal

Max. l/minHz

(WxLxH)mm

kg

Page 48: Dynaset catalogue us spa

HVO 33/6,5-180 7.9 2 610 Honda TRX 300, TRX 350, TRX 400, Suzuki LT 4WD, Yamaha YFM 350, John Deere AMT 600, etc

HVO 40/2-200 13.2 3 045

PRODUCT CATALOGUE 47

HVOHVO 33 -KIT

HYDRAULIC POWER TAKE-OFF

Hydraulic power for external use from main engine with power take-off:

BASE MACHINES: trucks, vans, pickups, ATVs, motor cycles, service vehicles, etc.

APPLICATIONS: Hydraulic power for accessories.

FEATURES: Control valve allows use of hydraulic cylinders, equipment with hydraulic motor, etc.

Tooth belt drive PTO up to 30kW

Cardan from crankshaft

Flexible coupling from crankshaft

Standard SAE- and DIN- type factory PTO for gearbox or engine

Split shaft PTO in cardan shaft

PTO installation alternatives

TOMAS DE POTENCIA (PTO) HIDRÁULICAS

Energía hidráulica para uso externo del motor primario con tomas de fuerza:

MÁQUINAS BASE: Camiones, furgonetas, pickups, ATVs, motocicletas, vehículos de servicio, etc.

APLICACIONES: Energía hidráulica para accesorios.

CARACTERÍSTICAS: Potencia hasta de un 50% de la potencia del motor principal. Sólo Dynaset es capaz de crear una tecnología que permite impulsar bombas hidráulicas variables a 5000 rpm. Energía disponible, también, mientras se conduce el vehículo. Potencia tomada del cigüeñal, con un acoplamiento flexible, una correa dentada o un cardán.

Alternativas de instalación de PTO

System typeTipo de sistema

Hydraulic output*Salida hidráulica

Examples Ejemplos

MaxUS gpm

Maxpsi

Vans, trucks, utility vehicles, etc. | Furgonetas, camiones,vehículos utilitarios etc.

Floating valveVálvula flotante

Floating valve is used for snowplow installation etc.La válvula flotante es usada para la instalación en quitanieves

PTO dividing gearboxCaja de cambios con dividido PTO

Installation between two U-joints (engine - U-joint -PTO dividing gearbos - U-joint) for vans. Hydraulic power taken out at gear box.Instalación entre dos juntas en U (motor – junta en U – caja de cambio con dividido PTO – junta en U) para furgonetas. Potencia hidráulica tomada en la caja de cambios.

Hydraulic throttle cylinderCilindro hidráulico de aceleración

Automatic throttle / pressureAutomática aceleración / presión

Hydroulic PTO kitKit hidráulico de PTO

Cam pump intallation kit for vans (MB vito, Sprinter, Toyota Hiace, etc.)Transmisión del PTO con correa dentada kit pour furgones (MB vito, Sprinter, Toyota Hiace, etc.)

* Depends on engine power of base machine | Depende de la potencia del motor de la maquinaria base.

Transmisión del PTO con correa dentada hasta 30kW

Cardán desde el cigüeñal

Acople flexible desde el cigüeñal

PTO de fábrica estándar tipo SAE y DIN para caja de cambios o motor

PTO con eje dividido en el eje del cardán

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 49: Dynaset catalogue us spa

48 PRODUCT CATALOGUE

VAL INSTALLATION VALVES

DYNASET is familiar with most machine brands and their hydraulic systems. Extra hydraulic power output cannot

be easier:

BASE MACHINES: All hydraulic systems.

FEATURES: PV SAE Priority valve takes the correct oil flow from the main pump with bolt-on sandwich flange: easiest way for extra output from original hydraulics. Pressure compensated and fast reacting oil flow control works perfect for single function or for multi-spool LS-valve like Danfoss, Rextroh, Bucher etc. LSV valve is a ready extra hydraulic output for LS-Variable pump systems such as Komatsu, CAT, Case, Rextroth etc and as well for load sensing directional control valves like Danfoss, Aichi, etc. Including the knowhow of right connection. Dynaset also offers additional installation items needed like Komatsu LS-nipple etc. Also other valves for installation available such as flow limiters and solenoid valves.

VÁLVULAS DE INSTALACIÓN

DYNASET sabe de todas las marcas de maquinaria y de todos los sistemas hidráulicos. Salida extra de potencia

hidráulica no podría ser más fácil:

MÁQUINAS BASE: Todos los sistemas hidráulicos.

CARACTERÍSTICAS: Las Válvulas Prioritarias PV SAE toman el caudal de aceite correcto de la bomba principal con brida SAE: la manera más fácil para obtener salida adicional del sistema hidráulico original. Presión compensada y control rápido del caudal de aceite, trabaja perfectamente para función sencilla o, también, para válvulas seccionales; como Danfoss, Rexroth, Bucher, etc. La válvula LSV es salida hidráulica extra siempre disponible, para sistemas de bombas LSV, como Komatsu, CAT, Case, Rexroth, etc; y también para válvulas de control direccional sensibles a carga, como Danfoss, Aichi, etc. Incluyendo el conocimiento técnico de la conexión correcta como de las boquillas Komatsu LS, etc.

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 50: Dynaset catalogue us spa

PV SAE ¾ - xx lpm - 12/24VPV SAE 1 - xx lpm - 12/24VPV SAE 1 ¼ - xx lpm - 12/24V

SV SAE 1 - Sxx-12/24VSV SAE 1 ¼ - Sxx-12/24V

LSV 40 - xx lpm - 12/24 VLSV 60 - xx lpmLSV 95 - xx lpmLSV 150 - xx lpm

VR 50PK - ½ - xx lpmVR 95PK - ¾ - xx lpmVRD 180PK - 1 - xx lpm

SV 70NC - ½ - 12/24 VSV 150NC - 1 - 12/24V

SV 70NC - ½ - 12/24 V -FeSV 150NC - 1 - 12/24V -Fe

VKV 90 - ¾

VKV 90 - ¾ -Fe

FLC

PRODUCT CATALOGUE 49

HMV VALVE SETUP

HMV VALVE SYSTEM BASIC BLOCKS

Models

Marking “xx” in the table below signifies flow on l/min. All DYNASET valves are factory set to designated flow rate, please specify upon ordering.

Modelos

Las “xx” en la siguiente tabla significan el caudal en l/min. Todas las válvulas DYNASET son pre ajustadas en fábrica para el caudal designado, por favor especifique al ordenar.

Model Modelo

DescriptionDescripción

Priority valve for max. 5075 psi, 18.5, 26.4 or 38.3 US gpm system, sandwich mounted with solenoid, through flow 0-25 US gpmVálvula prioritaria para un sistema de 5075 psi, 18.5, 26.4 or 38.3 US gpm máx., brida montado con solenoide, caudal de 0-25 US gpm.

Electric valve SAE 1” or 1 1/4” max. 26.4 US gpm Válvula eléctrica SAE de 1” , 1 1/4” y 26.4 US gpm máx.

LS-valve, solenoid control operated, pressure relief, max. 10.6, 15.85, 25 or 39.6 US gpm Válvula LS, operada por control con solenoide, desahogo de presión, 10.6 US, 15.85, 25, 39.6 US gpm máx.

Oil flow limiter, pressure compensator, max. 13.2, 25 or 47.6 US gpm Limitador de caudal de aceite, compensador de presión, 13.2, 25, 47.6 US gpm máx.

Solenoid valve 2/2, max. 18.5 or 39.6 US gpm, 3 045 psi, LS-connection Válvula solenoide 2/2, 18.5, 39.6 US gpm., 3 045 psi, con conexión LS.

Solenoid valve 2/2, max. 18.5 or 39.6 US gpm, LS-connection, 5075 psi max. Válvula solenoide 2/2, 39.6 18.5 US gpm máx., con conexión LS, 5075 psi máx.

Free flow valve, solenoid and pressure control, max. 3 045 psiVálvula de caudal libre, solenoide y control de presión, 3 045 psi máx.

Free flow valve, solenoid and pressure control, 5075 psi max. Válvula de caudal libre, solenoide y control de presión, 5075 psi máx.

DYNASET’s unique rpm control cartridge for DYNASET equipement with pilot control connection integrated.

HMV Modular Valve SystemHMV Modul Ventil System

DYNASET HMV is full set of Valve blocks to be stacked for every project for compact installation. LS-Valves, Flow limiters, Directional control etc. available

Details subject to change without notice / Detalles sujetos a cambios sin previo aviso

Page 51: Dynaset catalogue us spa

50 PRODUCT CATALOGUE

DATA

ArmaTrac / Atlas / Avant Tecno / Badger / Bobcat / CASE / CAT / Changling / Cukurova / Doosan / Dressta / Fiori / Foton / Lovol / Furukawa / Galmax / Gehl / Gradall / Hidromek / Hinowa / Hitachi / Holland / Hydrema / Hyundai / Ihimer / Jakob / JCB / Kobelco / Komatsu / Kramer / LBX Link Belt / Liebherr / LiuGong / Locust / LST Group / Lännen / M.Z. Imer / Magnum / Mecalac / Merlo / Palazzani / Paus / Rohr / Schäffer / Sennebogen / Sunward / Takeuchi / Thomas / Wacker Neuson / Weidemann / VF Venieri / Willmar / ...

AVANT 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic Pro

Articulated Loader218 0,59 13,4 23 185 3,5 (200/30) 400 ok PV-SAE R1/2

220 0,62 14 29 185 3,5 (200/30) 400 ok PV-SAE R1/2

Skid Steer Loader313S 0,53 9,7 22,5 175 3,5 (200/30) 400 ok PV-SAE R1/2320S 0,72 14 2x22,5 200 3,5 (200/30) 400 ok PV-SAE R1/2320S+ 0,72 14 2x22,5 220 3,5 (200/30) 400 ok PV-SAE R1/2

Telescopic loader

420 0,98-1,03 14 31 185 3,5 (200/30) 400 ok PV-SAE R1/2520 1,05+0,17 14 31 185 3,5 (200/30) 400 ok PV-SAE R1/2528 1,15+0,17 21 36 200 3,5 (200/30) 400 ok PV-SAE R1/2630 1,35 21 44 200 3,5, 6,5 (200/30) 400-800 ok PV-SAE R1/2635 1,38 28 66 200 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2

Articulated Telescopic Loader745 1,65 36 70 n. 200 (3,5) 6,5-15 200-420/20-50 400-1800 ok+VR PV-SAE R1/2750 1,7 36 70 n. 200 (3,5) 6,5-15 200-420/20-50 400-1800 ok+VR PV-SAE R1/2

BOBCAT 1000 kg kW l/min bar kW bar/lpm lpm Basic Pro

Skid Steer/ Wheel

S70 2,8 17,5 37 205 (3,5) 6,5 (200/30) 400-800 ok PV-SAE R1/2S100 4,1 26,5 50 205 (3,5) 6,5 200-420/20-30 400-800 ok PV-SAE R1/2S130 5,2 36,5 64 185 (3,5) 6,5-12 200-420/20-30 400-800 ok+VR PV-SAE R1/2S150 5,9 36,5 64 230 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2S160 6 45,5 64 (100) 230 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2S175 6,3 36,5 64 230 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2S185 6,2 45,5 64 (100) 230 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2S205 6,7 49 64 (100) 230 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2S250 7,8 56 78 (140) 230 (3,5) 6,5-15 200-420/20-50 400-2600 ok+VR PV-SAE R1/2S300 8,3 60,5 78 (140) 230 (3,5) 6,5-15 200-420/20-50 400-2600 ok+VR PV-SAE R1/2S630 7,7 55,5 87 (115,5) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2S650 8,3 55,5 87 (115,5) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2S750 8,7 63,5 87 (138) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2S770 9,2 68,5 90 (138) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2S850 10 68,5 87 (140) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2

Skid Steer/Roll

T110 5,2 31 47 205 (3,5) 6,5 200/30 400-1300 ok PV-SAE R1/2T180 7,6 49 64 (100) 230 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2T190 7,8 49 64 (100) 225 (3,5) 6,5-12 200-420/20-30 400-1800 ok+VR PV-SAE R1/2T630 9 55,5 87 (115,5) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2T650 9,4 55,5 87 (115,5) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2T750 10,3 63 87 (138) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2T770 10,3 68,5 87 (138) 240 (3,5) 6,5-15 90-420/20-150 400-2600 ok+VR PV-SAE R1/2

INSTALLATION DATA

EXCAVATORS, LOADERS ETC.

DYNASET has experience of practically all machine manufacturers and hydraulic systems. The following tables

contain short list of selected examples of maxhines and their matching DYNASET solution. If your machine is not on the list, contact us for details.

INFORMACIÓN PARA INSTALACIÓN

EXCAVADORAS, CARGADORAS, ETC.

DYNASET posee experiencia con prácticamente todos los fabricantes de maquinarias y todos los sistemas hidráulicos.

Las siguientes tablas contienen una corta lista de seleccionados ejemplos de maquinaria y su respectiva solución de DYNASET. Si su equipo no aparece en la lista, contáctenos para más detalle.

Manufacturer Marca

Model Modelo

PesoWeight

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 52: Dynaset catalogue us spa

PRODUCT CATALOGUE 51

CASE 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic Pro

Tracked Excavators

CX75SR 7,9 40 2x68 294 (3,5) 6,5-15 90-1600/20-180 400-5000 ok+VR LSVCX80 8,4 40 2x68 294 (3,5) 6,5-15 90-1600/20-180 400-5000 ok+VR LSVCX130B 12,6 71 2x129 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVCX135SR 13,5 70,9 2x117 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVCX160B120 17,1 89,2 2x142 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVCX180B120 17,9 89,2 2x142 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVCX210B157 21,5 117 2x211 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVCX230B157 23,6 117 2x190 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVCX240B177 25 132 2x234 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVCX290B207 29,8 154 2x234 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSV

Wheeled Excavators

WX95 Series 2 10 74 151 350 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVWX125 Series 2 12,6 84 182 350 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVWX145 Series 2 16,5 90 2x143+73 345 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVWX165 Series 2 18,5 105 2x150+80 350 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVWX185 Series 2 20,5 118 2x155+110 350 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVWX210 Series 2 22 129 2x206+108 350 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVWX240 Series 2 24,5 129 2x206+108 350 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSV

Loader Backhoes

580 Super R Series 3 7,9 72 160 210 (3,5) 6,5-20 90-800/20-180 400-7500 ok+VR LSV580 Super R+ Series 3 7,9 72 160 210 (3,5) 6,5-20 90-800/20-180 400-7500 ok+VR LSV590 Super R Series 3 7,9 82 170 210 (3,5) 6,5-20 90-800/20-180 400-7500 ok+VR LSV695 Super R Series 3 8,8 82 160 210 (3,5) 6,5-20 90-800/20-180 400-7500 ok+VR LSV

Skid Steer Loaders

410 Series 3 2,5 42 74/101 210 (3,5) 6,5-15 200-520/20-150 400-2600 ok+VR LSV420 Series 3 3 52 90/126 210 (3,5) 6,5-15 90-520/20-150 400-4100 ok+VR LSV445 Vertical Lift Series 3 3,7 57 90/126 210 (3,5) 6,5-15 90-520/20-150 400-4100 ok+VR LSV435 Vertical Lift Series 3 3,1 57 90/126 210 (3,5) 6,5-15 90-520/20-150 400-4100 ok+VR LSV430 Series 3 3,1 57 90/126 210 (3,5) 6,5-15 90-520/20-150 400-4100 ok+VR LSV440 Series 3 3,2 62 83/143 210 (3,5) 6,5-15 200-800/20-180 400-4100 ok+VR LSV

Telehandlers

TX130-33 9,9 74 115 240 (3,5) 6,5-20 90-520/20-150 400-4100 ok+VR LSVTX130-45 10,6 88 115 240 (3,5) 6,5-20 90-520/20-150 400-4100 ok+VR LSVTX130-40 10,2 88 115 240 (3,5) 6,5-20 90-520/20-150 400-4100 ok+VR LSVTX140-45 11,5 88 115 240 (3,5) 6,5-20 90-520/20-150 400-4100 ok+VR LSVTX170-45 12,3 88 115 240 (3,5) 6,5-20 90-520/20-150 400-4100 ok+VR LSV

CATERPILLAR 1000 kg kW l/min bar kW bar/lpm lpm Basic ProMidi 307D 7 40/54 150 280 (3,5) 6,5-10 200-420 30- 50 400-2600 PV-SAE R1

Maxi308C 8 41/55 128 274 (3,5) 6,5-10 200-420 30- 50 400-2600 PV-SAE R1311D 12,5 60/82 224 305 (3,5) 6,5-10 200-1600 30-180 400-2600 PV-SAE R1314D 15 67/91 224 305 (3,5) 6,5-10 200-1600 30-180 400-2600 PV-SAE R1

Tracked

320DL 21,8 103/140 2x205 350 (3,5) 6,5-10 200-1600 30-180 400-2600 PV-SAE R1323DL 22,3 103/140 2x205 350 (3,5) 6,5-10 200-1600 30-180 400-2600 PV-SAE R1324DL 26,1 124/169 2x220 350 (3,5) 6,5-10 200-1600 30-180 400-2600 PV-SAE R1329DL 29,6 140/190 2x235 350 (3,5) 6,5-10 200-1600 30-180 400-2600 PV-SAE R1

Wheeled

M313 16,2 95/129 190 350 (3,5) 6,5-10 200-1600/30-180 400-2600 LSVM315D 18,3 101/137 220 350 (3,5) 6,5-10 200-1600/30-180 400-2600 LSVM316D 19,8 118/160 250 350 (3,5) 6,5-10 200-1600/30-180 400-2600 LSVM318D 20,1 124/169 290 350 (3,5) 6,5-10 200-1600/30-180 400-2600 LSVM322D 22 123/167 350 350 (3,5) 6,5-10 200-1600/30-180 400-2600 LSV

Loader Backhoes422E 72,1-10,2 56/76 125 227 (3,5) 6,5-10 200-420/30-50 400-2600432E 77,8-10,7 67/91 156 249 (3,5) 6,5-10 200-420/30-50 400-2600444E 88,1-10,7 73/99 156 249 (3,5) 6,5-10 200-420/30-50 400-2600

Skid Steer Loaders216B 25,9 36/49 60 230 3,5-6,5 200-30 400-2600232B 26,8 42/57 60 230 3,5-6,5 200-30 400-2600

DOOSAN 1000 kg kW l/min bar kW bar/lpm lpm Basic ProDX 27Z 2,79 16,5 2x26+19 215 3,5-6,5 200-420/20-30 400-1000 ok PV-SAE R1/2DX 35Z 3,65 20,5 2x38 225 3,5-6,5 200-420/20-30 400-1000 ok PV-SAE R1/2DX 55W 5,5 40,8 2x55+37 240 (3,5) 6,5-10 90-420/20-30 400-1000 ok PV-SAE R1/2S75-S 8 37,9 2x60+37 240 (3,5) 6,5-10 90-520/20-30 400-1800 ok PV-SAE R3/4DX140LC 14 71 2x114 343 6,5-15 90-520/20-150 400-4100 ok+VR PV-SAE R3/4DX140W 14,8 99 2x156 343 6,5-20 90-1600/20-300 400-5000 ok+VR PV-SAE R3/4DX160W 15,9 99 2x156 343 6,5-20 90-1600/20-300 400-5000 ok+VR PV-SAE R3/4DX180LC 17,6 88 2x152 343 6,5-15 90-1600/20-300 400-5000 ok+VR PV-SAE R1DX190W 17,8-19,3 116 2x200 343 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1DX210W 19,9-20,8 120 2x231,7 343 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1DX225LC 21,5-22,4 110 2x206,5 343 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1DX255LC 24,6-25,5 129 2x219 343 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1DX300LC 31 147 2x247 343 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAE R1DX340LC 34 184 2x265 343 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAE R1DX420LC 42 218 2x315 343 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAE R11/4DX520LC 51 245 2x355 343 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAE R11/4

Manufacturer Marca

Model Modelo

PesoWeight

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 53: Dynaset catalogue us spa

52 PRODUCT CATALOGUE

HITACHI 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic ProZX17U-2 2,1 11 2x19,2+12,5 210 3,5-6,5 200-420/20-30 400-1000 ok PV-SAE R1/2ZX27U-2 3,15 19,7 2x35,2+17,6 245/206 (3,5) 6,5-10 90-520/20-50 400-1800 ok PV-SAE R1/2ZX35U-2 3,8 22,3 2x40+26,3 245/206 (3,5) 6,5-10 90-520/20-50 400-2600 ok PV-SAE R1/2ZX5OU-2 5,,20 29,8 125 245 (3,5) 6,5-15 90-520/20-150 400-2600 ok+VR PV-SAE R3/4ZX6OUSBLC-3 6,1 40,5 144 245 (3,5) 6,5-15 90-800/20-180 400-4100 ok+VR PV-SAE R3/4ZX85USBLC-3 8,1 39,4 2x79,2+61,6 360/250 (3,5) 6,5-12 90-800/20-180 400-4100 ok+VR PV-SAE R3/4ZX135USPL-3 15 69 2x117 343 (3,5) 6,5-20 90-1600/20-180 400-4100 ok+VR PV-SAE ZX140W-3 16 90 135+180 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1ZX170W-3 18,6 107 2x200 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1ZX180LC-3 19 90,2 2x191 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1ZX190W-3 19,4 122 2x189 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1ZX210W-3 20,8 122 189+195 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1ZX225USLCPL-3 26 122 2x212 350 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1ZX280LC-3 30 140 2x227 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1

HYUNDAI 1000 kg kW l/min bar kW bar/lpm lpm Basic Pro

Tracked Excavators

R16-9 1,8 12,5 2X17 170 3,5-5.0 200/30 400 ok PV-SAER27 Z-9 2,9 18,4 2X27,6+19,6 220 3,5-5.0 200-420/20-30 400-1800 ok PV-SAER35 Z-9 3,7 20,4 2X38,5 230 3,5-5.0 200-420/20-30 400-2600 ok PV-SAER55-9 5,78 42,5 2X55 230 3,5-20 200-420/20-50 400-2600 ok+VR PV-SAER60 CR-9 5,9 56 2X57.8 230 3,5-20 90-520/20-150 400-2600 ok+VR PV-SAER80 CR-9 8,4 59 2X72 230 3,5-30 90-1600/15-150 400-4100 ok+VR PV-SAER110-7A 12,5 72 2X107 260 (3,5) 6,5-40 90-1600/15-150 400-4100 ok+VR PV-SAER140 LC-9 15 89 2X123,5 260 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+VR PV-SAER145 LCR-9 16 89 2X130 260 (3,5) 6,5-50 90-1600/15-150 400-5000 ok+VR PV-SAER160 LC-9 19 94 2X160 330 (3,5) 6,5-50 90-1600/15-150 400-7500 ok+VR PV-SAER180 LC-9 19,9 94 2X160 330 (3,5) 6,5-50 90-1600/15-150 400-7500 ok+VR PV-SAER210 LC-9 22,3 113 2X222 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER235 LCR-9 24,2 113 2X222 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER250 LC-9 25,5 146 2X222 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER290 LC-9 29,9 169 2X252 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER320 LC-9 33,6 213 2X270 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER380 LC-9 38,2 221 2X288 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER480 LC-9 48,1 266 2X360 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER520 LC-9 51 266 2X360 330 (3,5) 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAER800 LC-7A 82,3 380 2X504 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAE

Wheeled Excavators

R55 W-9 5,5 42,5 2X55 230 5/3/2020 200-420/20-50 400-2600 ok+VR PV-SAER140 W-9 15,1 109 2X168 330 6,5-50 90-1600/15-150 400-7500 ok+VR PV-SAER170 W-9 18,6 122 2X168 330 6,5-50 90-1600/15-150 400-7500 ok+VR PV-SAER 210 W-9 20,9 131 2X222 330 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAE

Loaders

HL 730-9 9,8 93 126 170 6,5-20 90-520/20-150 400-4100 ok+VR PV-SAEHL 740-9 12 108 155 170 6,5-30 90-1600/15-300 400-5000 ok+VR PV-SAEHL 757-9 14,5 129 185 170 6,5-30 90-1600/15-300 400-4100 ok+VR PV-SAEHL 760-9 17,9 160 233 6,5-30 90-1600/15-300 400-7500 ok+VR PV-SAEHL 770-9 23,1 209 342 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAEHL 780-9 30 260 420 6,5-50 90-1600/15-300 400-7500 ok+VR PV-SAE

JCB 1000 kg kW l/min bar kW bar/lpm lpm Basic ProJCB 8020 2,1 14,7 43,6 220 3,5-6,5 200-420/20-30 400-2600 ok+VR PV-SAE R1/2JCB 8025 2,69 25,1 102 220 (3,5) 6,5-10 90-800/20-150 400-2600 ok+VR PV-SAE R3/4JCB 8030 3,3 25,1 102 245 (3,5) 6,5-10 90-800/20-150 400-2600 ok+VR PV-SAE R3/4JCB 8035 3,65 22,7 110 245 (3,5) 6,5-10 90-800/20-150 400-2600 ok+VR PV-SAE R3/4JCB 8040 4,3 33,1 169 220 (3,5) 6,5-10 90-800/20-180 400-5000 ok+VR PV-SAE R3/4JCB 8045 4,75 33,1 169 250 (3,5) 6,5-15 90-800/20-180 400-5000 ok+VR PV-SAE R3/4JCB 8055 ZTS 5,3 36 163 250 (3,5) 6,5-15 90-800/20-180 400-5000 ok+VR PV-SAE R3/4JCB JZ 70 8 44 170 284 (3,5) 6,5-15 90-1600/20-180 400-5000 ok+VR PV-SAE R3/4JCB JZ 140 14,8 73 2x124 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JZ 145 15,2 73 2x128 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JZ 149 D 16,8 73 2x128 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JZ 140 HD 17,1 73 2x124 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JS 145 HD 17,5 73 2x128 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JS 160 17,9 92 2x138 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JS 180 18 128 2x138 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JS 190 19 128 2x140 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB JS 200 21,2 128 2x214 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 220 22,6 128 2x214 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 235 23,2 128 2x208 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 220 PP 23,8 128 2x214 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 240 25,2 147 2x226 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JZ 255 26 128 2x208 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 260 27,8 147 2x226 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 290 29 161 2x250 373 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 330 33 212 2x290 348 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 360 36 212 2x310 348 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB JS 460 46 228 2x340 355 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1

Manufacturer Marca

Model Modelo

PesoWeight

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 54: Dynaset catalogue us spa

PRODUCT CATALOGUE 53

Wheeled Excavators

JCB 130 W 15,1 70/94 2x128 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB 145 W 15,1 92/123 2x138 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB 160 W 17,7 92/123 2x138 343 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR PV-SAE R3/4JCB 175 W 18,1 128/172 2x156 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1JCB 200 W 21,4 128/172 399 343 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR PV-SAE R1

KOBELCO 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic Pro17SR 1,65 11,3 2x 16,30 206 3,5-5 0 bar/lpm 400-800 ok27SR 2,52 15,9 2x 26,4 230 3,5-6,5 200/ 30 400-1800 ok PV-SAE30SR 3,17 21,1835SR 3,61 21,2 2x 38,40 230 3,5-12 200-420/ 20-30 400-2600 ok+VR PV-SAE50SR 4,66 29,3 2x 57,10 230 3,5-15 90-520/ 20-150 400-2600 ok+VR PV-SAE140SR 14,3 70,1 259,68 (3,5) 6,5-30 90-1600/ 20-180 400-7500 ok+VR PV-SAE215SR 24,8 114,09 416,39 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAE235SR 26,7 114,09 439,86 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAE70SR 7,45 40,27 152,17 (3,5) 6,5-30 90-520/20-150 400-7500 ok+VR PV-SAE80C 7,98 40,27 152,17 (3,5) 6,5-30 90-520/20-150 400-7500 ok+VR PV-SAE80CS 7,98 40,27 152,17 (3,5) 6,5-30 90-520/ 20-150 400-7500 ok+VR PV-SAESK115SR 11,9 58,8 2x118 324 (3,5) 6,5-30 90-1600/20-180 400-7500 ok+VR PV-SAESK135SRLC 13,9 62,5 2x118 343 (3,5) 6,5-30 90-1600/20-180 400-7500 ok+VR PV-SAEED150 16 70,1 259,68 (3,5) 6,5-30 90-1600/20-180 400-7500 ok+VR PV-SAESK135SL 16 62,5 2x118 343 (3,5) 6,5-30 90-1600/20-180 400-7500 ok+VR PV-SAESK135SRL 16 62,5 2x118 343 (3,5) 6,5-30 90-1600/ 20-180 400-7500 ok+VR PV-SAESK170LG 17,15 83,52 286,18 (3,5) 6,5-30 90-1600/20-180 400-7500 ok+VR PV-SAEED195 20,32 90,23 286,18 (3,5) 6,5-30 90-1600/20-180 400-7500 ok+VR PV-SAESK110NLC 20,4 110 2x210 343 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK210LR 23,36 111,86 439,86 (3,5) 6,5-30 90-1600/ 20-180 400-7500 ok+VR PV-SAESK210LC 21,7 111,86 439,86 343 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK120LR 23,36 111,86 439,86 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK235SRNLC 23,9 110 2x210 343 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK235SRLC 24 110 2x210 343 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK260LS 26 134,97 439,86 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK350ME 26,29 196,86 587,5 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK260LR 28,08 134,97 439,86 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK295LC 30,3 146,9 491,35 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK295LR 34,11 146,9 491,35 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK350LC 36,1 196,86 587,5 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK485LC 49,9 243,1 740,43 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK485ME 50,89 243,1 740,43 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAESK850LC Super Acera 80,98 369,87 1008,06 (3,5) 6,5-30 90-1600/20-300 400-7500 ok+VR PV-SAE

KOMATSU 1000 kg kW l/min bar kW bar/lpm lpm Basic Pro

Tracked Excavators Mini

PC14R-3 1,5 11,2 40,8 190 3,5-6,5 200-420/20-30 400-1000 ok PV-SAE R1/2PC20M-2 2 15,5 53,9+15,2 245 (3,5) 6,5-10 200-800/20-150 400-1800 ok LSVPC26MR-3 2,5 15,5 53,9+15,2 245 (3,5) 6,5-10 200-800/20-150 400-1800 ok LSVPC30MR-3 3,2 21,6 70+19,8 260 (3,5) 6,5-15 200-800/20-150 400-2600 ok LSVPC35MR-3 3,6 21,6 2x36,1+19,8 260 (3,5) 6,5-15 200-800/20-150 400-2600 ok LSVPC40MR-3 4,6 28,5 2x53,5+33,8 265 (3,5) 6,5-15 200-800/20-150 400-2600 ok LSVPC50MR-2 5 29,4 2x51+32 270 (3,5) 6,5-15 200-520/20-150 400-2600 ok LSV

Tracked Excavators MidiPC80MR-3 8 45,6 178+72 270 (3,5) 6,5-10 90-1600/20-180 400-4100 ok+VR LSVPC88MR-8 8,1 50,7 160+70 270 (3,5) 6,5-10 90-1600/20-180 400-4100 ok+VR LSVPC110R-1 10,5 70,9 180+73 294 (3,5) 6,5-10 90-1600/20-180 400-4100 ok+VR LSV

Tracked Excavators Maxi

PC130-8 13 68,4 242 352 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVPC138US-8 13,5 68 242 352 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVPC160LC-7 17,5 86 312 380 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVPC180LC-7 18,5 86 312 380 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVPC210LC-8 22 110 2x219 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPC210LC-8 Waste Spec 22 110 2x219 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPC230NHD-8 22,8 110 2x219 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPC240LC-8 25 125 2x219 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPC290LC-8 30 140 2x225 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPC350LC-8 35 184 2x268 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPC450LC-8 45 257 2x345 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSV

Wheeled Excavators Midi

PW75R-2 7,5 48 167+62 265 (3,5) 6,5-10 90-800/30-180 400-4100 ok+VR LSVPW95R-2 9 61,5 180+63 275 (3,5) 6,5-10 90-1600/20-180 400-4100 ok+VR LSVPW98MR-6 9 51 165+66 270 (3,5) 6,5-10 90-1600/20-180 400-4100 ok+VR LSVPW110R-1 10 70 180+73 295 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSV

Wheeled Excavators Maxi

PW140-7 13 86 252 380 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVPW160-7 15,5 90 308 380 (3,5) 6,5-20 90-1600/20-180 400-7500 ok+VR LSVPW180-7 16,5 109 308 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPW200-7 19 134 2x218 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPW220-7 20 134 2x218 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSVPW220-7MH 26 134 2x218 380 (3,5) 6,5-20 90-1600/20-300 400-7500 ok+VR LSV

Manufacturer Marca

Model Modelo

PesoWeight

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 55: Dynaset catalogue us spa

54 PRODUCT CATALOGUE

MULTIONE 1000 kg kW l/min bar kW bar/lpm lpm Basic ProM14D 0,39 9 19 3,5 (200/30) 400 ok PV-SAE R1/2M23B 0,65 17 31 3,5 (200/30) 400 ok PV-SAE R1/2M20D 0,75 15 31 3,5 (200/30) 400 ok PV-SAE R1/2M28D 0,75 21 31 3,5 (200/30) 400 ok PV-SAE R1/2S620 DT 0,88 14 32 3,5 (200/30) 400 - 800 ok PV-SAE R1/2S630 DT 0,9 20 42 3,5 - 6,5 (200/30) 400 - 800 ok PV-SAE R1/2SL835 DT 1,43 25 66 3,5 - 12 200 - 420 / 20 - 30 400 - 1800 ok+VR PV-SAE R1/2SL840 DT 1,46 30 72 3,5 - 12 200 - 420 / 20 - 50 400 - 1800 ok+VR PV-SAE R1/2GT45 DT 1,82 36 69 3,5 - 12 200 - 420 / 20 - 30 400 - 1800 ok+VR PV-SAE R1/2GT70 DT 1,88 36 50 3,5 - 6,5 200 - 420 / 20 - 30 400 - 1800 ok+VR PV-SAE R1/2GT950 DT 1,6 36 80 3,5 - 15 200 - 420 / 20 - 50 400 - 1800 ok+VR PV-SAE R1/2

TEREX 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic Pro

Wheel

TSR-50 2,9 37 65 230 (3,5)6,5-12 200-420 / 20-30 400-2600 ok PV-SAE R1/2TSR-60 2,9 45 65 230 (3,5)6,5-12 200-420 / 20-30 400-2600 ok PV-SAE R1/2TSR-70 3,4 55 81 230 (3,5)6,5-12 200-420 / 20-50 400-2600 ok PV-SAE R1/2TSR-80 3,5 62 81 230 (3,5)6,5-12 200-420 / 20-50 400-2600 ok+VR PV-SAE R1/2

Skid Steer Loaders

TSV-50 3,2 37 65 230 (3,5)6,5-12 200-420 / 20-30 400-2600 ok+VR PV-SAE R1/2TSV-60 3,2 45 65 230 (3,5)6,5-12 200-420 / 20-30 400-2600 ok+VR PV-SAE R1/2TSV-70 3,7 55 106 230 (3,5)6,5-15 90-420 / 20-150 400-2600 ok+VR PV-SAE R1/2TSV-80 3,9 62 106 230 (3,5)6,5-15 90-420 / 20-150 400-2600 ok+VR PV-SAE R1/2

Roll

PT-30 1,6 25 38 210 (3,5)6,5 (200/30) 400-1300 ok PV-SAE R1/2PT-60 2,88 45 66 210 (3,5)6,5-12 200-420 / 20-30 400-2600 ok+VR PV-SAE R1/2PT-80 4,07 56 114 210 (3,5)6,5-20 90-420 / 20-150 400-4100 ok+VR PT-100G 5,2 74,5 170 250 (3,5)6,5-20 90-800 / 20-180 400-5000 ok+VR

Tracked

TC16 1,65 13 31,5+18 165 3,5 (200/30) 400 ok PV-SAE R1/2TC20 1,95 13 31,5+18 180 3,5 (200/30) 400 ok PV-SAE R1/2TC25 2,45 17,4 67 250 (3,5)6,5-12 200-420 / 20-30 400-2600 ok+VR PV-SAE R1/2TC29 2,85 19 99 210 (3,5)6,5-20 90-420 / 20-150 400-2600 ok+VRTC35 3,5 22 95 250 (3,5)6,5-15 90-420 / 20-150 400-2600 ok+VRTC37 3,57 22 95 250 (3,5)6,5-15 90-420 / 20-150 400-2600 ok+VRTC48 4,68 29 2x57+37+8 245 (3,5)6,5-15 90-420 / 20-150 400-2600 ok+VRTC50 4,82 26,5 140 250 (3,5)6,5-30 90-800 / 20-180 400-5000 ok+VRTC60 5,65 32,2 2x62,4+43,2+8,4 245 (3,5)6,5-30 90-800 / 20-180 400-5000 ok+VRTC75 7,5 54 150 280 (3,5)6,5-30 90-1600 / 20-180 400-5000 ok+VRTC125 12,5 74,9 158 350 (3,5)6,5-30 90-1600 / 20-180 400-5000 ok+VR

WheeledTW70 6,8 50,2 2x62 245 (3,5)6,5-30 90-460 / 20-150 400-2600 ok+VRTW85 8,8 67 142 280 (3,5)6,5-30 90-1600 / 20-180 400-5000 ok+VRTW110 10,99 44 190 330 (3,5)6,5-40 90-1600 / 20-180 400-7500 ok+VR

CompactTL80AS 4,5 44TL65 (SKL824) 3,9 36,4 41 250 (3,5)6,5 (200/30) 400-1300 ok PV-SAE R1/2TL70S (SKS634) 5,2 44

Wheel LoaderTL80 (SKL834) 4,9 44 64 250 (3,5)6,5-12 200-420 / 20-30 400-1800 ok+VR PV-SAE R1/2TL100 (SKL844) 5,7 54 76 250 (3,5)6,5-12 200-420 / 20-50 400-2600 ok+VR PV-SAE R1/2TL120 (SKL854) 6,8 62,5 76 250 (3,5)6,5-12 200-420 / 20-50 400-2600 ok+VR PV-SAE R1/2

Heavy

TL160 (SKL160H) 9,2 74,5 99 280 (3,5)6,5-15 90-420 / 20-150 400-2600 ok+VRTL210 (SKL873SP) 12,5 119 160 270 (3,5)6,5-30 90-1600 / 20-180 400-5000 ok+VRTL260 (SKL260H) 14,4 128 160 310 (3,5)6,5-30 90-1600 / 20-180 400-5000 ok+VRTL310 17,6 203 220 350 (3,5)6,5-40 90-1600 / 20-180 400-7500 ok+VR

VOLVO 1000 kg kW l/min bar kW bar/lpm lpm Basic Pro

Mini Wheel Loaders

L20B 4,55 41 55 200 3,5-6,5 (10) 200-420/20-30 400-1800 ok+vrL25B 4,83 43 55 230 3,5-6,5 (10) 200-420/20-30 400-1800 ok+vrL30B Pro 5,5 52 55 250 3,5-6,5 (10) 200-420/20-30 400-1800 ok+vrL35B Pro 6,25 59,3 73 250 3,5-12 200-420/20-50 400-2600 ok+vrL40B 7,82 71 106 230 3,5-30 90-520/20-150 400-2600 ok+vrL45B 8,33 75 106 250 3,5-30 90-520/20-150 400-2600 ok+vrL45F 8,63 74,9 132 260 (3,5) 6,5-20 (30) 90-520/20-150 400-4100 ok+vrL50F 8,41 87 132 260 (3,5) 6,5-20 (30) 90-1600/15-150 400-4100 ok+vrL60F 11-13,3 115 145 260 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+vr

Wheel Loader

L60F 11-13,3 115 145 260 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+vrL70F 12,7-15 126 154 260 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+vrL90F 15-17 129 162 260 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+vrL110F 18-20 170 145 236 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+vrL120F 19-21 180 145 250 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+vrL150F 23-26 210 171 260 (3,5) 6,5-40 90-1600/15-150 400-5000 ok+vrL180F 26-30 235 247 260 (3,5) 6,5-50 90-1600/15-150 400-7500 ok+vrL220F 21-35 261 199 260 (3,5) 6,5-50 90-1600/15-150 400-7500 ok+vrL150G 23 220 180 290 (3,5) 6,5-50 90-1600/15-150 400-7500 ok+vrL180G 28 246 217 290 (3,5) 6,5-50 90-1600/15-150 400-7500 ok+vrL220G 32 274 253 290 (3,5) 6,5-50 90-1600/15-150 400-7500 ok+vrL180F High-lift 36,6 235 247+247 200+210 6,5-50 90-1600/15-150 400-7500 ok+vr LSVL350F 50-56 397 256+354+84 250+260+100 6,5-50 90-1600/15-150 400-7500 ok+vr

Manufacturer Marca

Model Modelo

PesoWeight

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 56: Dynaset catalogue us spa

PRODUCT CATALOGUE 55

Mini Excavators

EC15C 1,54-1,63 12,3 31 170 3,5-5 200/30 400-800 ok LSVEC17C 1,56-1,65 12,3 31 170 3,5-5 200/30 400-800 ok LSVEC18C 1,67-1,76 12,3 44 170 3,5-6,5 200/30 400-1300 ok LSVEC20C 1,85-1,94 3,5-6,5 200/30 400-1300EC25 2,66-2,85 20 45 230 3,5-6,5 200/30 400-1300 ok LSVEC27C 2,66-2,79 19,7 45 250 3,5-6,5 200/30 400-1300 ok LSVEC30 2,96-3,15 20 45 250 3,5-6,5 200/30 400-1300 ok LSVEC35C 3,43-3,56 27,1 60 240 3,5-10 200-420/20-30 400-1800 ok+vr LSVEC55C 5,7 36,2 57,8 216 3,5-10 200-420/20-30 400-1800 ok+vr LSVEC55C Pro 5,5 38,8 52,5 210 3,5.6.5 (10) 200-420/20-30 400-1800 ok+vr LSVECR28 2,7-2,8 13,5 45 210 3,5-6,5 200/30 400-1300 ok+vr LSVECR38 3,3-3,4 19,7 45 210 3,5-6,5 200/30 400-1300 ok+vr LSVECR48C 4,7-4,85 27,1 60 240 3,5-10 200-420/20-30 400-1800 ok+vr LSVECR58 Plus 5,8-5,97 37,5 70 240 3,5-12 (15) 200-420/20-50 400-2600 ok+vr LSVECR88 Plus 8,45-8,65 40,3 70 240 3,5-12 (15) 200-420/20-50 400-2600 ok+vr LSV

Tracked Excavators

EC140C 12,8-15 69 2x118 343 6,5-50 90-1600/15-180 400-7500 ok+vr LSVECR145C 14,8-15,9EC160C 16,7-19,1 87 2x145 343 6,5-50 90-1600/15-180 400-7500 ok+vr LSVEC180C 18,3-19,2 87 2x145 343 6,5-50 90-1600/15-180 400-7500 ok+vr LSVEC210C 21,7-23,1 110 2x200 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC235C 23,7-25 110 2x200 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSVECR235C 23,9-26,1 113 2x200 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC240C 25,2-26,2 125 2x230 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC290C 29,1-30,4 143 2x250 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSVECR305C 33,8-37 143 2x263 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC360C 38-39,7 205 2x300 353 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC380D 38-50,5 215 2x300 353 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC480D 38-50,5 265 2x 358 353 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC460C 47,9-50,5 245 2x358 353 6,5-50 90-1600/15-300 400-7500 ok+vr LSVEC700C 69,3-71,7 316 2x436 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSV

Tracked Forestry MachineryFC2121C 24,5 110 2x200 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSVFC2421C 27,9 110 2x200 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSV

Demolition

EC210CLD 21,7-23 110 2x200 343 6,5-50 90-1600/15-300 400-7500 ok+vr PV-SAE R3/4EC240CLD 25,3-26,2 125 2x230 343 6,5-50 90-1600/15-300 400-7500 ok+vr PV-SAE R3/4EC290CLD 29,1-30,4 143 2x250 343 6,5-50 90-1600/15-300 400-7500 ok+vr PV-SAE R1EC360CLD 38,3-39,7 205 2x300 343 6,5-50 90-1600/15-300 400-7500 ok+vr PV-SAE R1EC460CLD 45,6-48,3 245 2x358 343 6,5-50 90-1600/15-300 400-7500 ok+vr PV-SAE R1EC700CLD 68,3-70,6 316 2x436 343 6,5-50 90-1600/15-300 400-7500 ok+vr

High Reach DemolitionEC360C HR 43-46,3 205 2x300 343 6,5-50 90-1600/15-300 400-7500 ok+vrEC460C HR 52,6-56,6 245 2x358 343 6,5-50 90-1600/15-300 400-7500 ok+vrEC700C HR 81,5-88,5 316 2x436 343 6,5-50 90-1600/15-300 400-7500 ok+vr LSV

Manufacturer Marca

Model Modelo

PesoWeight

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 57: Dynaset catalogue us spa

56 PRODUCT CATALOGUE

Airo / Aichi / Alba-Marcel / Alimak Hek / Altrad / Altrex / ATN / Bauer / Bluelift / Bronto Skylift / Büter / Cargotec / Cela / Combisafe / Cormach / CTE / Dinolift / Dur-A-Lift / Goian / Effer / Elliot / Ensinger / ESDA / Fassi / Ferrari / Furukawa / GEDA / HIAB / Hinowa / Hubtex / Hymer / Ihimer / Jakob / Jiangsu / JLG / Kreit-zler / Leguan Lifts / Manitou / MEC / Merlo / Multitel Pagliero / Oil&Steel / Omme Lift / Palazzani / Palfinger / Paus / PM-Group / Raxtar / Ruthmann / Secatol / Skyjack / Snorkel / Socage / Tadano / Vema / Versalift / ...

AICHI 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic Pro

Telescopic lift

SR18 A 12,8 44,3 (3,5) 6,5-15 90-800/20-150 400-2600SR18 AJ 12,9 44,3 (3,5) 6,5-15 90-800/20-150 400-2600SR21 A 15,2 44,3 (3,5) 6,5-15 90-800/20-150 400-2600SR21 AJ 14,9 44,3 (3,5) 6,5-15 90-800/20-150 400-2600SP18 A 12,3 44,3 (3,5) 6,5-15 90-800/20-150 400-2600SP18 AJ 12,3 44,3 (3,5) 6,5-15 90-800/20-150 400-2600SP21 AJ 14,3 44,3 (3,5) 6,5-15 90-800/20-150 400-2600SP25 B 14,7 42,3 (3,5) 6,5-15 90-800/20-150 400-2600

DINO LIFT 1000 kg kW l/min bar kW bar/lpm lpm Basic Pro

Telescopic lift

205 RXT 4,2 19,7 50,4 210 3,5-6,5 200 / 30 400-1800240 RXT 4,4 19,7 50,4 210 3,5-6,5 200 / 30 400-1800265 RXT 4,5 19,7 50,4 210 3,5-6,5 200 / 30 400-1800165 XTC 2,9 18,7 50,4 210 3,5-6,5 200 / 30 400-1800185 XTC 3 18,7 50,4 210 3,5-6,5 200 / 30 400-1800220 XTC 3,2 18,7 50,4 210 3,5-6,5 200 / 30 400-1800185 XTS 8 50,4 210 3,5-6,5 200 / 30 400-1800

HAULOTTE 1000 kg kW l/min bar kW bar/lpm lpm Basic Pro

Scissors

Compact 10DX 3,3 20,4 3,5 200/30 400-800 LSVCompact 12DX 3,9 20,4 3,5 200/30 400-800 LSVH12SX 5,6 22,3 3,5 200/30 400-800 LSVH15SX 6,2 23,1 3,5 200/30 400-800 LSVH15SXL 6,5 23,1 3,5 200/30 400-800 LSVH18SX 7,3 23,1 3,5 200/30 400-800 LSVH18SXL 7,5 23,1 3,5 200/30 400-800 LSV

Articulated

HA120PX 5,6 21 3,5 200/30 400-800 LSVHA16PE 7,9 31 3,5-5 200/30 400-800 LSVHA16PX 7 31,2 3,5-5 200/30 400-800 LSVHA16SPX 6,6 31,2 3,5-5 200/30 400-800 LSVHA16X 6,5 31,2 3,5-5 200/30 400-800 LSVHA18PX 7,9 31,2 3,5-5 200/30 400-800 LSVHS18SPX 7,5 31,2 3,5-5 200/30 400-800 LSVHA20PX 11,7 43,1 3,5-6,5 200-420/20-30 400-1300 LSVHA260SPX 16 43,1 3,5-6,5 200-420/20-30 400-1300 LSVHA32PX 21,1 62 3,5-6,5 200-420/20-30 400-1300 LSVHA41PX-NT 23 62 3,5-6,5 200-420/20-30 400-1300 LSV

Telescopic

H14TX 6 21 3,5 200/30 400-800 LSVH16TPX 6,8 31,2 3,5-5 200/30 400-800 LSVH21TX 11,8 33,3 3,5-5 200/30 400-800 LSVH23TPX 13,1 33,3 3,5-5 200/30 400-800 LSVH25TPX 13,7 33,3 3,5-5 200/30 400-800 LSVH28TJ+ 17,3 55 3,5-6,5 200-420/20-30 400-1300 LSVH43TPX 20,6 62 3,5-6,5 200-420/20-30 400-1300 LSV

Telehandlers

HTL3210 7,9 62 3,5-5 200-420/20-30 400-1300 LSVHTL3510 8,5 70 3,5-6,5 200-420/20-30 400-1300 LSVHTL4010 8,6 70 3,5-6,5 200-420/20-30 400-1300 LSVHTL4014 11 74,9 3,5-6,5 200-420/20-30 400-1300 LSVHTL4017 12,1 74,9 3,5-6,5 200-420/20-30 400-1300 LSV

JLG 1000 kg kW l/min bar kW bar/lpm lpm Basic Pro

Telescopic boom

150 HAX 26,4 57 147 262 3,5-20 90-1600 / 20-180 400-2600800S 15,1 47-47,2 86 310 3,5-15 90-520 / 20-150 400-2600860SJ 16,5 47-47,2 86 310 3,5-15 90-520 / 20-150 400-2600460SJ 7,2 36,5 280 3,5-15 90-800 / 30-150 400-1800600S 10,3 36,5-47,2 46 3,5-6,5 200 / 30 400-1800600SJ 10,8 36,5-47,2 46 3,5-6,5 200 / 30 400-1800660SJ 12,5 36,5-47,2 46 3,5-6,5 200 / 30 400-1800600SC 10,2 47-47,2 46 310 3,5-6,5 200 / 30 400-1800660SJC 12,3 47-47,2 46 310 3,5-6,5 200 / 30 400-1800800AJ 15,6 47-47,2 3,5-15 90-800 / 30-150 400-2600600A 10 36,5-47,2 46 3,5-6,5 200 / 30 400-1800600AJ 10,5 36,5-47,2 46 3,5-6,5 200 / 30 400-1800600AN 10,9 36,5-47,2 3,5-6,5 200 / 30 400-1800600AJN 11 36,5-47,2 3,5-6,5 200 / 30 400-1800340AJ 4,4 18,5 81 280 3,5-15 90-520 / 20-150 400-2600450AJ 7,3 36,5 3,5-15 90-800 / 30-150 400 - 18001350SJP 20,4 55,9 317 3,5-20 90-800 / 30-150 400-26001200SJP 18,6 55,9 317 3,5-20 90-800 / 30-150 400-26001500SJ 21,8 55,9 317 3,5-20 90-800 / 30-150 400-26001250AJP 20 55,9 317 3,5-20 90-800 / 30-150 400-2600

PLATFORM LIFTSELEVADORES DE PLATAFORMA

Manufacturer Marca

ModelModelo

Weight Peso

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 58: Dynaset catalogue us spa

PRODUCT CATALOGUE 57

Scissor lift3394RT 5,4 36,5 3,5-10 200-520 / 30-50 400-26004394RT 6,9 36,5 3,5-10 200-520 / 30-50 400-2600

MANITOU 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic Pro

Telescopic Truck

MVT628 5,6 74,5 80 235 3,5-15 200-420/20-50 400-2600 PV-SAEMVT665 11,4 78 140 275 3,5-20 90-520/20-150 400-4100 PV-SAEMVT675 12,1 78 140 275 3,5-20 90-520/20-150 400-4100 PV-SAEMRT1432 12,5 74,5 115 270 3,5-20 90-520/20-150 400-2600 PV-SAEMRT1542 13,4 74,5 115 270 3,5-20 90-520/20-150 400-2600 PV-SAEMRT1635 13 74,5 115 270 3,5-20 90-520/20-150 400-2600 PV-SAEMRT1742 14,6 74,5 115 270 3,5-20 90-520/20-150 400-2600 PV-SAEMRT1850 15,4 110 160 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMRT2150 16,1 110 160 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMRT2440 17,4 94 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMRT2540 17,2 110 160 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMRT3050 22,9 159 165+74 220+270 3,5-20 ( 30 ) 90-1600/20-180 400-7500 PV-SAEMHT860LT 11,6 106 140 275 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMHT7140 LT 21,4 125 165 350 3,5-20 ( 60 ) 90-1600/20-180 400-7500 PV-SAEMHT7140 turbo 19,5 129 170 350 3,5-20 ( 60 ) 90-1600/20-180 400-7500 PV-SAEMHT10120 L 15,9 129 165 350 3,5-20 ( 60 ) 90-1600/20-180 400-7500 PV-SAEMHT10160 L 22,3 129 170 350 3,5-20 ( 60 ) 90-1600/20-180 400-7500 PV-SAEMHT10210 L 26,9 129 165 350 3,5-20 ( 60 ) 90-1600/20-180 400-7500 PV-SAEBT420 4,5 38 49,5 230 3,5-6,5 200/30 400-1300 PV-SAEBT425 4,4 38 49,5 230 3,5-6,5 200/30 400-1300 PV-SAEMT523 5,2 43 87 230 3,5-15 200-420/20-30 400-2600 PV-SAEMT620 5,2 43 87 230 3,5-15 200-420/20-30 400-2600 PV-SAEMT728 6,3 61,5 105 240 3,5-20 90-520/20-150 400-2600 PV-SAEMT732 7,25 70 105 240 3,5-20 90-520/20-150 400-2600 PV-SAEMT928 6,7 61,5 105 240 3,5-20 90-520/20-150 400-2600 PV-SAEMT932 7,6 70 105 240 3,5-20 90-520/20-150 400-2600 PV-SAEMT940 LT 9 74 96 250 3,5-15 90-520/20-150 400-2600 PV-SAEMT1030 S-ST 7,5 70 105 250 3,5-20 90-520/20-150 400-2600 PV-SAEMT1033 7,8 74,5 105 250 3,5-20 90-520/20-150 400-2600 PV-SAEMT1235 S 9 74,5 105 260 3,5-20 90-520/20-150 400-2600 PV-SAEMT1240 LT 9,5 74,5 166 260 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1435 H 11 74,5 168 250 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1435 H SLT 10,2 74,5 168 250 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1436 R 9,5 64 103 270 3,5-20 90-520/20-150 400-2600 PV-SAEMT1440 A 11,4 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1440 EP 10,8 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1440 H 10,7 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1440 HA 11,4 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1440 SLT 10,7 74,5 168 260 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT1440 SLT ORH 12 74,5 192 260 3,5-20 ( 40 ) 90-1600/20-180 400-5000 PV-SAEMT1445 HLT 10,7 74,5 168 260 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT 1740 SLT 11,2 74,5 196 260 3,5-20 ( 40 ) 90-1600/20-180 400-5000 PV-SAEMT 1740 SLT ORH 11,8 74,5 163 260 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT 1745 HSLT 11,5 74,5 206 260 3,5-20 ( 40 ) 90-1600/20-180 400-5000 PV-SAEMT 1745 HSLT ORH 11,5 74,5 192 260 3,5-20 ( 40 ) 90-1600/20-180 400-5000 PV-SAEMT 1840 A 12 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT 1840 EP 11,4 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT 1840 H 11,7 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT 1840 HA 12,4 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMT 1840 11,4 74,5 170 270 3,5-20 ( 30 ) 90-1600/20-180 400-5000 PV-SAEMLT 523 5,2 55 89 260 3,5-15 200-420/20-30 400-2600 PV-SAEMLT 627 5,9 74,5 105 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 627-20 5,9 74,5 101 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 627-24 5,9 74,5 100 260 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 627 T 20 5,9 74,5 105 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 627 T 24 5,9 74,5 105 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 630 6,6 74,5 105 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 634 7 91 149 270 3,5-20 90-520/20-150 400-4100 PV-SAEMLT 731 LSU 7 74,5 110 270 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 731 T 7,2 74,5 106 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 731 TNC 7,1 74,5 106 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 735 7 74,5 108 270 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 735 120 LSU 6,6 91 150 270 3,5-20 90-520/20-150 400-4100 PV-SAEMLT 741 120 LSU 7,5 91 150 270 3,5-20 90-520/20-150 400-4100 PV-SAEMLT 742 T 7,7 74,5 106 250 3,5-20 90-520/20-150 400-2600 PV-SAEMLT 742 H LSU 7,6 74,5 150 270 3,5-20 90-520/20-150 400-4100 PV-SAEMLT 845 8,8 91 150 270 3,5-20 90-520/20-150 400-4100 PV-SAEMLT 845 HT 8,9 74,5 150 270 3,5-20 90-520/20-150 400-4100 PV-SAEMLT 940 L 9,3 91 150 270 3,5-20 90-520/20-150 400-4100 PV-SAEMLT 1035 LT 8 74,5 108 270 3,5-20 90-520/20-150 400-2600 PV-SAE

Articulated160ATJ 7,5 33,5 3,5 200/30 400180ATJ 8,1 33,5 3,5 200/30 400200ATJ 10 33,5 3,5 200/30 400

Manufacturer Marca

ModelModelo

WaightPeso

EngineMotor

FlowCaudal

PressurePresión

HG HPW HK/HKLInstallationInstalación

Page 59: Dynaset catalogue us spa

58 PRODUCT CATALOGUE

Atlas / Caterpillar / Fuchs / Leaper / Liebherr / Manitou / Minelli / Mantsinen / Sennebogen / Terex / ...

SENNEBOGEN 1000 kg kW l/min bar kW (model) bar/lpm (model) lpm (model) Basic Pro

Telehandler305 C+ multihandler 11,5 91kW 200 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV310 multiloader 21 144 285 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV

Material handler

718 M 19,5 97 / 113 310 + 200 (aux.) 340 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV723 M-HD 22 112 310 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV730 M-HD 30 148 530 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV735 M-HD 38,5 186 530 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV818 M 19,9 97 310 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV818 R 22 97 310 340 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV821 M 22 97 310 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV821 R 22 97 310 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV825 M 28 129 410 340 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV825 R 33 129 410 340 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV830 M 36 151 520 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV830 M-HD 37-40 151 520 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV830 R 43 151 520 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV830 R-HD 35 151 520 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV830 R-HDD 43 151 520 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV835 M 44 194 660 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV835 R 54 186 660 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV835 SPECIAL 66 186 660 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV840 M 53 194 660 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV840 R 59 194 660 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV850 M 61 268 770 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV850 R 66,5 268 770 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV850 SPECIAL 65-88 268 770 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV860 M 71 268 770 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV860 R 77 268 770 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV870 M 70 300 950 360 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV870 R 87 300 950 360 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV870 SPECIAL 90-110 300 950 340 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV880 150-180 570 2 x 1100 350 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV880 EQ 215-270 570 2 x 1100 330 (3,5kVA) 6,5-30 90-1600/ 20-180 400-7500 ok+VR LSV

FUCHS 1000 kg kW L/min Bar kW Bar/lpm lpm Basic PRO

Material handler

MHL320 17,8 85 290 320 6,5-30 200-1600 / 30-180 400-7500 ok+VR LSVMHL331 22 114 380 320 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSVMHL335 23,5 114 380 320 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSVMHL340 27,5 128 2x320 325 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSVMHL350 32 148 2x320 320 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSVMHL360 44 186 640 360 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSVMHL380 66 273 640 320 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSVMHL454 31 176 608 350 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSVMHL474 41,5 213 608 330 6,5-30 90-1600 / 30-300 400-7500 ok+VR LSV

MATERIAL HANDLING EQUIPMENT

MANEJADORAS DE MATERIAL

Manufacturer Marca

ModelModelo

Weight Peso

Engine Motor

Flow Caudal

Pressure Presión

HG HPW HK/HKLInstallation Instalación

Page 60: Dynaset catalogue us spa

3.5 - 120 kVA

50/60 Hz

26 kg >

180-400 A

18 kg >

2 - 10 kVA

3.5 - 40 kW

28 kg >

3-12 kW

0 720 - 1450 mm

350 kg >

10-200 kW

90 - 1600 bar

10 - 300 l/min

8 kg >

1500 - 2800 mm

30 - 180 l/min

~> 200 m

15 - 120 l/min

400 - 11 500 l/min

8 - 13 bar

PV SAE

PC SAE ¾, 1 , 1¼”

DYN

ASE

T O

Y 2/

2014

3-12 kW

Ø 28 - 57 “

770 lbs >

10-200 kW

1300-23 000 psi

4-80 Gpm

18 lbs >

<->60 - 110 “

8 - 47 Gpm

~> 650 ft

4 - 32 Gpm

100 - 2000 Gpm

116 - 190 psi

PV SAE

PC SAE ¾, 1 , 1¼”

3.5-120 kVA

50/60 Hz

57 lbs >

180-400 A

40 lbs >

2-10kVA

3.5-40kW

61 lbs >

EQUIPO HIDRÁULICO

ELECTRICIDAD GENERADOR HIDRÁULICO (HG) – electricidad de alta calidad para todas las herramientas de CA, motores, etc. Control automático de frecuencia y voltaje. MÁQUINA DE SOLDAR HIDRÁULICA (HWG) – la más livi-ana del mundo para maquinaria. GENERADOR HIDRÁULICO PARA IMÁN (HMG) – una fuente de aliment-ación completa para imanes industriales con rápida desimantación automática. IMÁN HIDRÁULICO (HMAG) – unidad completa para el reciclaje de chatarra de demolición. Fácil conexión con dos acoples rápidos.

AGUA A ALTA PRESIÓNBOMBA HIDRÁULICA DE AGUA A ALTA PRESIÓN (HPW) – con la mejor relación potencia-peso del mundo. Con el principio patentado de pistón-pistón y sin partes rotativas garantizan gran durabilidad y tamaño extremadamente compacto. Aplicaciones: Lavado a presión, limpieza de calles y tuberías, supresión de polvo, corte con agua, hidro-demolición y desincrustación, extinción de incendios, bombeo de fluido para perfora-ciones, hidro-hidráulica, robots para lavado, trabajos subacuáticos, etc.

CONOCIMIENTO TÉCNICO DE HIDRÁULICA Válvula prioritaria PV SAE de Dynaset de fácil instalación y garantizada fiabilidad: Caudal de aceite correcto de la bomba principal. Fuentes de alimen-tación hidráulica, herramientas de rescate, tomas de potencia (PTO), bombas vibratorias y mucho más con la tecnología de Dynaset.

AIRE COMPRIMIDOCOMPRESOR HIDRÁULICO (HK & HKL) – Aire comprimido potente y fiable, en un tamaño compacto en todas las máquinas de trabajo. El compresor de pistón HK tiene el tanque integrado en el marco y una válvula de descarga; el compresor de paleta HKL tiene una válvula de descarga automática.

ELECTRICITY HYDRAULIC GENERATOR HG - high quality electricity for all AC-powered tools, motors etc. Automatic frequency & voltage control. Hydraulic welder HWG - the world’s lightest welder for machinery. Hydraulic magnet generator HMG – a complete power source for lifting magnet with quick automatic demagnetization. Hydraulic magnet HMAG -0 complete unit for demolition scrap recycling. Easy connection with two quick couplings.

HIGH PRESSURE WATER IHYDRAULIC HIGH PRESSURE WATER PUMP HPW - the best power-to-size ratio in the world. Patented piston-to-hydraulic piston principle and no rotating parts guarantees great durability and extremely compact size. Applications: power washing, street and pipeline cleaning, dust suppression, water cutting, hydro demolition and scaling, fire fighting, drilling fluid pumping, water hydraulics, washing robot, underwater works, etc.

HYDRAULIC EQUIPEMENT

COMPRESSED AIR HYDRAULIC COMPRESSOR HK & HKL - powerful and reliable compressed air in compact size in all work machines. HK piston compressor has frame integrated air tank and unload valve, HKL rotary vane compressor has automatic unload.

HYDRAULIC KNOW-HOW Dynaset PV SAE priority valve for easy installation and guaranteed reliability: Correct oil flow from main pump. Hydraulic power packs, rescue tools, PTOs, vibra pumps and much more with Dynaset technology.

Distributor :