________________________________________________________________________________________________________

1

E- AUCTION SALE PROCESS

MEMORANDUM

E-Auction Sale of assets of

S. Kumars Nationwide Limited - In Liquidation

CIN:L17120MH1990PLC058361

Date of Auction Announcement – December 12, 2019

Date of E-Auction – February 6, 2020 (as per Corrigendum)

Issued by:

Mr. Om Prakash Agrawal

Liquidator — S. Kumars Nationwide Limited

IBBI Reg. No: IBBI/IPA-001/IP-P00201/2017-18/10444

Regd Address: 801, Sterling Towers, 3rd Cross Lane, Lokhandwala complex,

Andheri (West), Mumbai 400053

Office: I-21/22, Paragon Centre, P. B. Marg, Worli, Mumbai – 400013

Email: lq.sknl@gmail.com

Dated: December 12, 2019 updated on January 15, 2020

________________________________________________________________________________________________________

2

TABLE OF CONTENTS

1. INTRODUCTION .................................................................................................................................. 3

2. DEFINITIONS ....................................................................................................................................... 4

3. BID PROCESS ....................................................................................................................................... 6

4. ELIGIBILITY CRITERIA .................................................................................................................... 9

5. DOCUMENTS REQUIRED TO BE SUBMITTED TO ASCERTAIN ELIGIBILITY OF THE

BIDDER(S)........................................................................................................................................... 10

6. PHYSICAL VERIFICATION AND SITE VISIT ............................................................................... 11

7. DUE DILIGENCE ............................................................................................................................... 12

8. ASSETS TO BE AUCTIONED AND RESERVE PRICE................................................................... 13

9. E-AUCTION DETAILS ....................................................................................................................... 15

10. EARNEST MONEY DEPOSIT ........................................................................................................... 16

11. DECLARATION OF SUCCESSFUL BIDDER(S) ............................................................................. 18

12. FRAUDULENT AND CORRUPT PRACTICES ................................................................................ 20

13. COSTS, EXPENSES AND TAX IMPLICATIONS ............................................................................ 22

14. GOVERNING LAW AND JURISDICTION ...................................................................................... 23

15. TIMELINE........................................................................................................................................... 24

16. DISCLAIMER ..................................................................................................................................... 26

17. ANNEXURES ...................................................................................................................................... 28

A. ANNEXURE I ...................................................................................................................................... 28

B. ANNEXURE II..................................................................................................................................... 33

C. ANNEXURE III ................................................................................................................................... 36

D. ANNEXURE IV ................................................................................................................................... 38

E. ANNEXURE V ..................................................................................................................................... 40

F. ANNEXURE VI ................................................................................................................................... 42

1. Building details ................................................................................................................................... 45

2. Plant and Machinery Details .............................................................................................................. 47

________________________________________________________________________________________________________

3

1. INTRODUCTION

S. Kumars Nationwide Limited (“SKNL”/ the Company) is a textile company established by S.

Kumars Group having its registered office in Mumbai. SKNL was incorporated as public limited

company in 1990. In 1998, SKNL entered in collaboration with Reid & Taylor (International)

Limited for manufacturing and marketing of suiting under the brand “Reid & Taylor” in India. It was

setup as a subsidiary company under the flagship of SKNL and named as Reid & Taylor (India)

Limited (RTIL). RTIL is also currently undergoing the Liquidation process.

The Company is in the business of manufacturing of cotton fabrics and has an operational weaving

and processing unit at Bharuch, Gujarat, (known as High Value Fine Cotton Fabric Unit). The

Bharuch unit has a capacity of manufacturing 12.50 million meters for weaving and 18 million for

processing and finishing of cotton fabric annually; however, currently it is working at around 30% of

its total capacity. The Company has imported plant & machinery and commissioned at Bharuch Unit

under EPCG Scheme but has not fully fulfilled export obligation under the said Scheme.

On April 24, 2018, due to non-payment of debt, CIRP was initiated under IBC by the creditors of

SKNL. However, as no resolution could be arrived at during the CIRP, the Hon’ble NCLT approved

commencement of the Liquidation Process vide order dated June 19, 2019 and appointed Mr. Om

Prakash Agrawal as Liquidator of SKNL with effect from the said date.

It is the endeavour of the Liquidator to sell the Assets and properties comprising the liquidation

estate of the Company in the manner specified under Regulation 32, 33 and Schedule I (provided

under Regulation 33) of the Insolvency and Bankruptcy Board of India (Liquidation Process)

Regulations 2016 and other rules, regulations, orders, circulars, directions or notifications or the

like, issued pursuant to or under the IBC or the Liquidation Process Regulations, as the case may be,

and as per directions, if any, of the NCLT in respect of the liquidation process of the Company and

in the manner specified in this E-Auction Sale Process Memorandum.

The E-Auction Participant(s) are encouraged to make themselves acquainted with the provisions of

the IBC and the Liquidation Process Regulations and any other rules, regulations, orders, circulars,

directions or notifications or the like, issued pursuant to or under the IBC or the Liquidation Process

Regulations, as the case may be.

________________________________________________________________________________________________________

4

2. DEFINITIONS

A. “Adjudicating Authority” or “NCLT” shall mean the Hon’ble Mumbai Bench of the

National Company Law Tribunal;

B. “Applicable Laws” shall mean all applicable laws, regulations, rules, guidelines, circulars,

re-enactments, revisions, applications and adaptations thereto, judgments, decrees,

injunctions, writs and orders of any court, arbitrator or governmental agency or authority,

rules, regulations, orders and interpretations of any governmental authority, court or statutory

or other body applicable for such transactions including but not limited to the IBC,

Liquidation Regulations, Companies Act, 1956 / 2013 (as applicable), Competition Act, 2002

, Transfer of Properties Act, 1882, Sale of Goods Act, 1930, Foreign Exchange Management

Act, 1999, whether in effect as of the date of this E Auction Process Information Document

or thereafter and each as amended from time to time;

C. “Assets” shall mean the assets of the S. Kumars Nationwide Limited as specified in Clause 8

of this E-Auction Sale Process Memorandum;

D. “Bid” shall mean, any bid submitted by the Bidder(s) as required in terms of this E-Auction

Sale Process Memorandum and in accordance with the provisions of IBC read together with

the Liquidation Process Regulations and the Applicable Laws;

E. “CIRP” shall mean Corporate Insolvency Resolution Process as per the Insolvency and

Bankruptcy Code, 2016;

F. “E-Auction Sale Process Memorandum” or “Document” shall mean this document

including all the appendices hereto, for the purposes of setting out the process for submission

of a bid and selection of Successful Bid in accordance with the provisions of the IBC and

shall include all supplements, modifications, amendments, alterations or clarifications thereto

issued in accordance with the terms hereof;

G. “E-Auction Participant(s)” or “Bidder(s)” shall mean, Person or Persons who submitted a

bid as per the E-Auction Sale Process Memorandum; and shall include a Qualified Bidder(s)

or the Successful Bidder(s), as the case may be, and as the context requires;

H. “Eligible Bidder(s)” shall mean Bidder(s) who are eligible in terms of this E-Auction Sale

Process Memorandum, provisions of IBC and provisions of the Liquidation Process

Regulations;

I. “EOI” or “Expression of Interest” shall mean an intimation from the Bidder(s) to the

Liquidator specifying their interest to be a part of the E-Auction process

J. “IBC” shall mean Insolvency and Bankruptcy Code, 2016 and the related rules and

regulations issued thereunder, as amended from time to time;

K. “Liquidation Process Regulations” shall mean, the Insolvency and Bankruptcy Board of

India (Liquidation Process) Regulations 2016 as amended from time to time;

________________________________________________________________________________________________________

5

L. “Liquidator” shall mean an insolvency professional appointed as a liquidator of the

Company in accordance with section 34 of the IBC;

M. “Person” shall mean an individual, a partnership firm, an association, a corporation, a limited

company, a trust, a body corporate, bank or financial institution or any other body, whether

incorporated or not;

N. “Qualified Bidder(s)” shall mean a Bidder(s) whose bid fulfils the eligibility criteria and

who furnishes Earnest Money Deposit as listed in the E-Auction Sale Process Memorandum.

O. “SKNL” or “The Company” or “Corporate Debtor” S. Kumars Nationwide Limited in

Liquidation acting through the Liquidator;

P. “Seller” shall mean S. Kumars Nationwide Limited in Liquidation acting through the

Liquidator;

Q. “Successful Bidder(s)” or “Successful E-Auction Participant(s)” means, the Qualified

Bidder(s) whose bid is/are approved and who is/are declared successful by the Liquidator

after the auction;

Capitalized terms used herein but not defined otherwise shall have meaning assigned to them under

the provisions of the IBC and the rules and regulations framed thereunder.

________________________________________________________________________________________________________

6

3. BID PROCESS

1. This Document has been issued for the purpose of carrying out electronic auction (“E-

Auction”) of assets of SKNL under IBC and Liquidation Process Regulations.

2. All information provided in this document should be read together with the provisions of the

IBC and the Liquidation Process Regulations. In the event of a conflict between this

document and IBC or Liquidation Process Regulations, the provisions of the IBC or the

Liquidation Process Regulations, as the case may be, shall prevail.

3. The information contained in this document or subsequently provided to Bidder(s), whether

verbally or in documentary or any other form by or on behalf of the Liquidator, is provided

based on the terms and conditions set out in this document.

4. This document is neither an agreement nor an offer by the Liquidator to the prospective

Bidder(s) or any other person. The purpose of this document is to provide interested parties

with information that may be useful to them in making their bids pursuant to issue of this

document. The assumptions, assessments, statements and information contained in this

document may not be complete, accurate, adequate or correct. Each Bidder(s) should conduct

their own investigations, analysis and should check the accuracy, adequacy, correctness,

reliability and completeness of the assumptions, assessments, statements and information

contained herein.

5. Information provided in this document to the Bidder(s) has been collated from several

sources. The information given is not intended to be an exhaustive account of statutory

requirements and should not be regarded as complete. The Liquidator accepts no

responsibility for the accuracy or otherwise for any statement contained herein.

6. The Liquidator, makes no representation or warranty and shall have no liability to any

person, including any Bidder(s) under any law, statute, rules or regulations or tort, principles

of restitution or unjust enrichment or otherwise for any loss, damages, cost or expense

which may arise from or be incurred or suffered on account of anything contained in this

document or otherwise, including the accuracy, adequacy, correctness, completeness or

reliability of the document and any assessment, assumption, statement or information

contained therein or deemed to form part of this document or arising in any way from

participation in the E-Auction process.

7. The Liquidator accepts no liability of any nature howsoever caused arising from reliance of

any Bidder(s) upon the statements contained in this document

8. The Liquidator may in its absolute discretion, but without being under any obligation to do

so, update, amend or supplement the information, assessment or assumptions contained in

this document.

9. The issue of this document does not imply that the Liquidator is bound to select a Bidder(s)

as Successful Bidder(s) for the assets of the company and the Liquidator reserves the right to

reject all or any of the Bidder(s) or bids without assigning any reason whatsoever.

________________________________________________________________________________________________________

7

10. Each Bidder(s) shall bear all its costs and charges associated with or relating to the

preparation and submission of its bid and/ or participation in the E-Auction, including but not

limited to preparation, copying, postage, delivery fees, expenses associated with any

demonstrations or presentations which may be required by the Liquidator or any other costs

incurred in connection with or relating to its bid.

11. E-Procurement Technologies Limited (Auction Tiger) has been appointed as the E-Auction

Service Provider. The sale of the Properties shall be undertaken by the E-Auction Service

Provider for and on behalf of the Seller through an E-Auction platform provided on the

website portal of the E-Auction Service Provider (Platform). Other details with respect to the

e-auction are as follows:

Particulars Description

Type of Bid E-Auction

Seller SKNL represented by the Liquidator Mr. Om Prakash Agrawal,

E-Auction Service Provider E-Procurement Technologies Limited (Auction Tiger)

Website of E-Auction

Service Provider https://ncltauction.auctiontiger.net

Annexures and Formats

Annexure I – Affidavit and Undertaking

Annexure II – Bid Form (to be filled in and signed and

stamped by the Bidder(s) and uploaded)

Annexure III – Declaration by the Bidder(s) (duly filled in and

signed and stamped by the Bidder(s) and uploaded along with

the Bid form)

Annexure IV – Technical Terms and Conditions of E-Auction

Annexure V – Format of Letter of Intent

Annexure VI – Description of Assets

Special Instructions

Please note that this bidding is a serious matter and last-minute

bidding may lead to unnecessary lapses. Neither the E-Auction

Service Provider nor the Liquidator will be responsible for

any lapses on part of the Bidder(s)

12. All terms and conditions with respect to the sale of the Properties shall be governed by the

directions of the Liquidator, in accordance with the provisions of applicable laws and

directions of Hon’ble NCLT. As mandated by the Hon’ble NCLT, the Liquidator shall

exercise all rights with respect to sale of the Assets and it would be open to the Liquidator to

appoint such experts, professionals or other persons, as the Liquidator might think necessary,

so as to enable the sale of the Assets.

13. The liquidator may conduct multiple rounds of auctions to maximize the realization from the

sale of the assets, and to promote the best interests of the creditors.

14. The Annexures to this Document shall form an integral part hereof and this Document shall

always be read in conjunction with the Annexures hereto.

________________________________________________________________________________________________________

8

15. The title documents relating to the Properties shall be available for inspection, on request to

be made to the Liquidator, at 5th Floor, B2, Marathon Innova, Marathon Nextgen, G K Marg,

Lower Parel, Mumbai, 400 013 by contacting Mr. M. K. Wadhwa (M:+91 9867555613)

(Email: lq.sknl@gmail.com).

16. This Document is neither transferable nor assignable.

________________________________________________________________________________________________________

9

4. ELIGIBILITY CRITERIA

Only those Bidder(s) who meet the eligibility criteria specified below may be considered / shortlisted

by the Liquidator to participate in the E-Auction Process. Bidder(s) which do not meet the said

eligibility criteria shall be rejected at the discretion of the Liquidator, without providing any reason

or incurring any liability. The liquidator reserves the right to revise eligibility criteria at any time.

Please note that any person submitting a bid under E-Auction Sale Process for SKNL shall not be a

person ineligible to be a resolution applicant in terms of the IBC including Section 29A of the Code.

An affidavit confirming eligibility to submit a bid for S. Kumars Nationwide Limited (in

Liquidation) shall be submitted along with EOI in the format as provided in “Annexure I”.

Criteria

A. Applicant shall not be an insolvent company / individual

B. Applicant should not have any negative track-record / history, i.e., Applicant should not have

defaulted on any resolution plan/liquidation sale under IBC or any other restructuring

mechanism

C. Applicant should not have been debarred during the CIRP tenure and this includes affiliates

or any restructuring / IBC cases in India

________________________________________________________________________________________________________

10

5. DOCUMENTS REQUIRED TO BE SUBMITTED TO ASCERTAIN ELIGIBILITY OF

THE BIDDER(S)

The E-Auction Sale Process Applicant(s) or the Bidder(s) would need to submit the following forms,

documents, authorizations by the Bidder(s):

A. Ownership Structure and Composition of the E-Auction Applicant(s) / Bidder(s), Proof of

Identification, Current Address Proof, PAN card, Valid Email ID, Landline and Mobile

Phone Number.

B. Authorization to the Signatory ( in case the Bidder(s) is the legal entity)

C. Affidavit and Undertaking by the E-Auction Sale Process Applicant(s) (through Authorized

Signatory in case the Bidder(s) is the legal entity). The format of Affidavit and Undertaking

is attached vide “Annexure I”

D. An Eligible Bidder(s) will need to submit the duly filled, signed and stamped Bid Application

Form attached vide “Annexure II” and duly filled, signed, and stamped Declaration by

Bidder(s) attached vide “Annexure III”

Upon verification of the eligibility of the E-Auction Sale Process Applicant(s), the said applicant

shall be informed to proceed further with due diligence / site visit and to submit Earnest Money

Deposit as per the terms of the E-Auction Sale Process Memorandum.

Interested Applicants can submit the eligibility documents immediately upon receipt of E-Auction

Sale Process Memorandum.

Further, it should be noted that at any stage of the E-Auction process, the Liquidator may request the

prospective Bidder(s) to submit additional documents to evaluate their eligibility.

________________________________________________________________________________________________________

11

6. PHYSICAL VERIFICATION AND SITE VISIT

Upon written request from Eligible Bidder(s), the Liquidator shall facilitate inspection / physical

verification and site visit of the Property and Assets of the Company preferably during January 20,

2020 to January 27, 2020. The properties can be inspected by the prospective Bidder(s) at the site

with prior appointment contacting Mr. M. K. Wadhwa (M:+91 9867555613) (Email:

lq.sknl@gmail.com).

The Liquidator may arrange a discussion meeting prior to Site visit of the Property and Assets at any

time prior to the closure of the e-auction process, if such meeting is considered necessary by the

Liquidator.

________________________________________________________________________________________________________

12

7. DUE DILIGENCE

The Liquidator shall provide necessary assistance for conduct of due diligence by eligible bidders.

The information and documents shall be provided by the Liquidator in good faith. The documents

shall be kept in an Online Data Room. Access to the Data Room shall be provided on signing the

Confidentiality Agreement. The Bidder(s) may note that the Liquidator would not have verified any

of the information, data or documents shared and shall not accept any responsibility or liability,

whatsoever, in respect of any statements or omissions contained in the shared data.

The intending bidders, prior to submitting their bid, should make their independent inquiries

regarding the title of the property, zone of the land, dues of local taxes, electricity and water charges,

development charges, maintenance charges, if any and inspect the property at their own expenses

and satisfy themselves.

For any assistance in carrying out the due diligence Mr. M. K. Wadhwa (M:+91 9867555613)

(Email: lq.sknl@gmail.com) may be contacted.

________________________________________________________________________________________________________

13

8. ASSETS TO BE AUCTIONED AND RESERVE PRICE

SKNL proposes sale of High Value Fine Cotton Fabric Manufacturing Unit at Bharuch (Gujarat)

business as a going concern which includes Leasehold Land, and Freehold Land, Factory Building,

Plant and Machinery, Furniture and Fixtures and net current assets pertaining to the Unit [Current

Assets – Current Liabilities (Refer to liabilities accrued on or after the commencement of Corporate

Insolvency Resolution Process i.e. April 24, 2018)] and the Brands/ Trademarks owned by SKNL

along with licences, permits, approvals and registrations to the extent they are transferable under the

applicable law on “As is where is basis”, “As is what is basis”, “Whatever there is basis”, and

“No recourse basis”. The proposed sale of assets of the Company does not entail transfer of any title

except the title which the Company had on its assets as on date of transfer of the Unit.

Given below is a list of assets to be auctioned along with their Reserve prices

Lot Nature of

Asset Description

Reserve Price

(INR Crores)

Earnest Money

Deposit

(INR Crores)

1

Leasehold

Land

Part of Plot no. 825 of Jhagadia GIDC,

Bharuch in the village Dadheda,

Jhagadia Taluka, Bharuch District,

Gujarat having a total land area of 42.04

acres / 1,70,133 sq. mt. or 18,31,294 sq.

ft. This land is leasehold from GIDC

and is subject to sub-division of said

Plot.

201.80 20.18

Factory

building

Plant building along with ancillary

structures having total built up area of

61,994 sq. mt. or 6,67,298 sq. ft. This

also includes land developments in form

of boundary walls, Sewage line,

streetlights, internal roads etc.

Plant and

Machinery

Plant and Machinery which includes all

the machineries installed for

manufacturing of fabric as well as

equipment installed in utility such as

boiler, DG set, ETP, STP etc. This also

includes furniture & fixture, office

equipment, Computers and vehicles.

Brands Brands as owned by S. Kumars

Nationwide Limited

Net Current

Assets

Net Current Assets (Current Assets less

Current Liabilities) amounting to Rs 5

crore approx. as on date. The Current

Assets will not include the Debtors /

Claims which are under litigation as on

date of transfer of Unit.

Payable at book value additionally as

on date of transfer of Unit.

________________________________________________________________________________________________________

14

Kindly note that the Bidder(s) cannot place a bid for the Assets at a value below the Reserve

price

Further, the Bidders can increase their Bid by a minimum incremental amount of Rs. 50,00,000

for Lot No. 1.

Please find appended the details of underlying Assets in “Annexure VI”

Cognizance should be taken of the fact that the liquidator does not give any assurance or warranty of

the physical condition of assets and their suitability for any sort of operation that the bidder

envisages.

________________________________________________________________________________________________________

15

9. E-AUCTION DETAILS

Given below are the details pertaining to the proposed E-Auction

A. E-Auction date: February 6, 2020 from 11.00 am to 1.00 pm

In case, a bid is placed in the last 10 minutes of the closing time of the E-auction, the closing

time will automatically get extended for 10 minutes with unlimited extensions.

B. Last date for submission of EOI, Eligibility Documents and EMD: February 3, 2020 till 5.00 PM

C. For any technical support in bidding process please contact: Mr. Vijay Shetty - +91 9619002431/

6352490773 / E-Mail: vijay.shetty@auctiontiger.net

________________________________________________________________________________________________________

16

10. EARNEST MONEY DEPOSIT

All E-Auction Participant(s), along with or prior to the submission of their Bids, shall deposit INR

20,18,00,000 (INR Twenty Crores Eighteen Lakhs Only) for Lot No. - 1, as earnest money

(“Earnest Money Deposit” or “EMD”).

The Earnest Money shall be provided by way of a Demand Draft issued by any scheduled

commercial bank in India in favour of “S. Kumars Nationwide Limited- In Liquidation”.

Earnest Money may also be provided by the E-Auction Participant(s) by way of direct bank transfer

(RTGS / NEFT) to the bank account specified below. No interest will be paid to the E-Auction

Participant(s) in relation to the amount deposited as Earnest Money. In this regard, the following

must be noted

A. Earnest Money is to be paid by the Bidder(s) prior to uploading the online bid form.

B. The details for bank transfer of the Earnest Money are as follows:

Account Number: 0187102000006224

Beneficiary Name: S. Kumars Nationwide Limited - In Liquidation

Bank Name: IDBI Bank Limited

Branch: Lower Parel

IFSC Code: IBKL0000187

C. Earnest Money is required to be paid by way of NEFT/RTGS in name of “S. Kumars

Nationwide Limited - In Liquidation” latest by Monday, February 3, 2020 till 5.00 pm. In case

of payment by Bank Demand Draft, the payment of Earnest Money is required to be deposited

by January 29, 2020.

D. The details of any remittances in this regard shall be entered in the online form submitted by the

Bidder(s). The entire Earnest Money amount shall be remitted by the Bidder(s) from bank

account owned by the Bidder(s).

E. Bidder(s) shall preserve the remittance challan and shall produce the same in front of the

Liquidator as and when demanded.

F. All payment made by the Bidder(s) under the e-auction shall be intimated to the Liquidator at

lq.sknl@gmail.com

The Entire Amount paid by the bidder including the Earnest Money Deposit can be forfeited

at any time, upon the occurrence of any of the following events:

A. If any of the conditions under this Document are breached by the E-Auction Participant(s) or in

case the E-Auction Participant(s) is / are found to have made any misrepresentation; or

B. If the E-Auction Participant(s) is / are found to be ineligible to submit the bid under Section 29A

of the IBC (as amended from time to time) or is / are found to have made a false or misleading

declaration of eligibility under Section 29A of the IBC (as amended from time to time); or

C. If the E-Auction Participant(s) is / are identified as the Successful Bidder(s) and it fails to pay

balance sale consideration as per terms of the sale.

________________________________________________________________________________________________________

17

Adjustment of Earnest Money of the Successful Bidder(s)

The Earnest Money shall be allowed to be set-off against or used as part of the consideration in the

final payment only.

________________________________________________________________________________________________________

18

11. DECLARATION OF SUCCESSFUL BIDDER(S)

The Liquidator shall determine and at his sole discretion (which discretion shall not be used

arbitrarily), declare at the end of the E-Auction, the Successful Bidder(s) for any asset lot(s).

Determination of the Successful Bidder(s) shall be done on the basis of highest bid (not below the

reserve price) received for each Lot of assets via the E-Auction, unless the Liquidator determines,

acting reasonably, that the highest bidder shall not be identified as the Successful Bidder.

Where the Earnest Money has been provided by means of a remittance to the Company’s bank

account or by Demand Draft, such funds will be retained by the Liquidator as part payment of the

consideration that the Successful Bidder has agreed to pay for the relevant asset lot(s).

The Liquidator is not bound to accept the highest offer and has the absolute right to accept or reject

any or all offer(s) or adjourn / postpone / cancel the e-Auction or withdraw any asset lot or portion

thereof from the E-Auction proceedings at any stage without assigning any reason there for.

Return of Earnest Money Deposit of unsuccessful bidders

The Earnest Money Deposit of unsuccessful bidders will be returned within 7 days from the date of

declaration of the Successful Bidder. .

Issuance of Letter of Intent

The Liquidator shall, as soon as reasonably possible following the end of the E-Auction, but not

more than 7 days from the end of E-Auction, issue to the Successful Bidder a letter of intent (“ LoI”/

“Letter of Intent”), as per Annexure V inviting the Successful Bidder to provide balance sale

consideration (plus any applicable GST & other applicable charges, if any, on 100% of the bid sum)

within 90 (ninety) days of the date of issuance of the LoI,. This LoI per se does not confirm sale in

favour of the Successful Bidder. Confirmation of sale is subject to the fulfilment of terms and

conditions of E-Auction Sale and approval of the Liquidator.

The Successful Bidder shall, within a period of 2 (two) days from the date of issuance of the LoI,

unconditionally accept the LoI, and record such acceptance by providing the Liquidator with 1 (one)

copy of the LoI with an endorsement stating that such LoI is, “Accepted Unconditionally”, under the

signature of the authorized Director / Authorized Signatory of the Successful Bidder.

Failure to accept the LoI within the time period specified may result in the disqualification of the

Successful Bidder along with cancellation of the LoI and forfeiture of the Earnest Money.

Payment of Sale Consideration

The Successful Bidder(s) shall deposit the balance sale consideration within 90 (ninety) days from

the date of such demand. Provided that the payments after 30 (thirty) days shall attract interest at the

rate of 12% p.a. Provided further that the sale shall be cancelled if full payment is not received

within 90 (ninety) days.

________________________________________________________________________________________________________

19

Completion of Sale

On payment of the full amount of sale consideration and any applicable taxes & levies (if any), the

sale shall stand completed, and the Liquidator shall execute Certificate of sale or Sale deed and the

assets shall be delivered to the Successful Bidder. The Certificate of sale or Sale deed will be issued

and /or transaction / sale documents will be executed in the name of the Successful Bidder only and

will not be issued in any other name(s). It is expressly stipulated that there are no implied obligations

on the part of the Liquidator to do all acts, things and deeds whatsoever for the completion of the

sale.

Default in payment of the balance sale consideration and any applicable GST, if any, on 100% of the

bid sum by the Successful Bidder will result in disqualification of the Successful Bidder including

forfeiture of Earnest Money. The asset lot(s) may be put to re-auction or sold to the next highest

Qualified Bidder and the defaulting Successful Bidder shall have no claim/right in respect of such

asset lot.

________________________________________________________________________________________________________

20

12. FRAUDULENT AND CORRUPT PRACTICES

The E-Auction Participant(s) shall observe the highest standard of ethics during the E-Auction Sale

Process and subsequently during the closure of the E-Auction Sale Process and declaration of

Successful Bidder(s). Notwithstanding anything to the contrary, contained in this Document, or in

the Letter of Intent, the Liquidator shall reject an auction bid, revoke the Letter of Intent, as the case

may be, without being liable in any manner whatsoever to the E-Auction Participant(s), if the

Liquidator, at his discretion, determines that the E-Auction Participant(s) has, directly or indirectly

or through an agent, engaged in corrupt practice, fraudulent practice, coercive practice, undesirable

practice or restrictive practice in the E-Auction Sale Process or has, undertaken any action in respect

of such process which results in the breach of any Applicable Law including the Prevention of

Corruption Act, 1988. In such an event, the Liquidator may invoke the Earnest Money, without

prejudice to any other right or remedy that may be available under this Document or Applicable

Law.

For the purposes of this Clause the following terms shall have the meaning hereinafter

respectively assigned to them:

“Coercive practice” shall mean impairing or harming, or threatening to impair or harm, directly or

indirectly, any person or property to influence any person’s participation or action in the auction

Process;

“Corrupt practice” shall mean (i) the offering, giving, receiving, or soliciting, directly or

indirectly, of anything of value to influence the actions of any person connected with the auction

Process (for avoidance of doubt, offering of employment to or employing or engaging in any manner

whatsoever, directly or indirectly, any official of the Liquidator or the Company, who is or has been

associated or dealt in any manner, directly or indirectly with the auction Process or arising there

from, before or after the execution thereof, at any time prior to the expiry of 1 (one) year from the

date such official resigns or retires from or otherwise ceases to be in the service of the Liquidator or

the Company, shall be deemed to constitute influencing the actions of a person connected with the

auction Process); or (ii) engaging in any manner whatsoever, during the auction Process or

thereafter, any person in respect of any matter relating to the Company, who at any time has been or

is a legal, financial or technical adviser of the Liquidator or the Company, in relation to any matter

concerning the auction process;

“Fraudulent practice” shall mean a misrepresentation or omission of facts or suppression of facts

or disclosure of incomplete facts, in order to influence the auction Process;

“Restrictive practice” shall mean forming a cartel or arriving at any understanding or arrangement

among the E-Auction Participant(s) with the objective of restricting or manipulating a full and fair

competition in the auction Process; and

________________________________________________________________________________________________________

21

“Undesirable practice” shall mean (i) establishing contact with any person connected with or

employed or engaged by the liquidator with the objective of canvassing, lobbying or in any manner

influencing or attempting to influence the auction Process; or (ii) having a Conflict of Interest.

The Bidder(s) shall not involve himself or any of his representatives in price manipulation of any

kind directly or indirectly by communicating with other Bidder(s). The Bidder(s) shall not divulge

either his bid or any other details provided to him by the Liquidator or during the due diligence

process in respect of the asset to any other party. Prior to conduct of due diligence/ site visits, the

Liquidator may require the Bidder(s) to execute confidentiality agreement with the Company/

Liquidator.

________________________________________________________________________________________________________

22

13. COSTS, EXPENSES AND TAX IMPLICATIONS

The Auction Participant(s) shall be responsible for all the costs incurred by it on account of its

participation in the E-Auction Process, including any costs associated with participation in the

discussion Meeting (if any), Site Visit, etc. The Liquidator shall not be responsible in any way for

such costs, regardless of the conduct or outcome of the E-Auction Process.

For purpose of abundant clarity, it is hereby clarified that the E-Auction Participant(s) is / are

expected to make its own arrangements including accommodation for the discussion Meeting (if

organised) or Site Visit and all costs and expenses incurred in that relation shall be borne by the E-

Auction Participant(s).

All expenses incurred towards movement / shifting of plant & machinery(ies) or any asset of the

Company post the E-Auction Sale Process should be borne by the Buyer. The Liquidator shall not be

held responsible / liable to pay any expenses towards such movement of plant & machinery(ies) or

any asset of the Company.

The E-Auction Participant(s) shall not be entitled to receive re-imbursement of any expenses which

may have been incurred on account of carrying out due diligence, search of title to the assets and

matters incidental thereto or for any purpose in connection with the E-Auction Sale Process plan.

A. The Successful Bidder shall bear all the necessary expenses like applicable stamp duties/

additional stamp duty/ registration charges, transfer charges, sub-division charges, notified area

charges (applicable to Successful bidder of Lot No. 1), conversion charges, premium, fees, etc.

for transfer of property(ies) in name of the Successful Bidder(s)

B. The Successful Bidder/s shall bear the sub-division charges of land payable on land area

proportionate to area in Lot No.1. The Liquidator shall apply for sub-division of GIDC plot after

issuance of LoI to the Successful Bidder/s and such Bidder/s shall pay the amount of sub-division

charges within 10 days from the date of demand. In case, the bid succeeds only for one of the Lot

No. 1, the Successful bidder shall initially pay full amount of sub-division charges and said

Successful Bidder shall be given due set off for the excess amount, in subsequent payments/ final

payment.

C. The Successful Bidder shall bear the cess or other applicable taxes i.e. GST, TDS etc.

The E-Auction Participant(s) shall be responsible for fully satisfying the requirements of the IBC

and related Regulations as well as all Applicable Laws that relevant for the sale process. The Buyer

shall be responsible for obtaining requisite regulatory or statutory or third-party approvals, no-

objections, permission or consents, if any, that are or may be required under Applicable Law for

purchasing the relevant assets.

________________________________________________________________________________________________________

23

14. GOVERNING LAW AND JURISDICTION

This Document, the E-Auction Sale Process Memorandum and the other documents pursuant to this

Document shall be governed by the laws of India and any dispute arising out of or in relation to this

Document or the shall be subject to the exclusive jurisdiction of the Adjudicating Authority, courts

and tribunals at Mumbai, India.

________________________________________________________________________________________________________

24

15. TIMELINE

Given below is the Timeline for the E-Auction Sale Process :

Sr. No. Event Timeline (Days)

1.

Public Announcement and Opening of

Auction Portal and E-Auction Sale Process

Memorandum document made available on

the websites as per Terms and Conditions

December 12, 2019

Corrigendum dated January 15, 2020

2.

Last date for submission of EOIs including

KYC, Eligibility criteria documents and

EMD

February 3, 2020 till 5.00 PM.

In case the payment is done by way of

DD, the EMD shall be submitted latest by

January 29, 2020.

3. E-Auction Date and Time

February 6, 2020 from 11.00 am to 1.00

pm (In case, a bid is placed in the last 10

minutes of the closing time of the E-

auction, the closing time will

automatically get extended for 10 minutes

with unlimited extensions).

4. Letter of Intent (LOI) to be issued to the

Successful Bidder Within 7 days from close of the e-auction

5 Unconditional acceptance of LOI by the

Successful Bidder

Within 2 days from issuance of the LOI

by the Liquidator

6 Payment of Sale consideration by

Successful Bidder(s)

The Successful Bidder(s) shall deposit the

entire sale consideration within 90

(ninety) days from the date of such

demand. Provided that the payments after

30 (thirty) days shall attract interest at the

rate of 12% p.a. Provided further that the

sale shall be cancelled if full payment is

not received within 90 (ninety) days.

7 Return of Earnest Money (EMD) for

Unsuccessful Bidder(s) On or before February 13, 2020

________________________________________________________________________________________________________

25

Note: The Liquidator reserves the right to amend the key terms of the E-Auction Sale Process

including reserve price, earnest money deposit, bid increment amounts and timelines at his sole

discretion, to the extent permissible under the applicable laws and regulations.

Any information about amendments / extension of any of the timelines will be available on the E-

Auction website and communicated to Eligible Bidder(s).

________________________________________________________________________________________________________

26

16. DISCLAIMER

This document is issued by Mr. Om Prakash Agrawal, the Liquidator for general information

purposes, to provide general information only, without regard to specific objectives, suitability,

financial situations and the requirements of any particular person. The purpose of this document is

to set out the process for submitting E-Auction bids for the assets of S. Kumars Nationwide Limited

(in liquidation) in accordance with the IBC. Nothing herein or in materials relating to this

Document is intended to be construed as legal, financial, accounting, regulatory or tax advice by the

Liquidator. This Document is personal and specific to each E-Auction Participant. Neither this

Document nor anything contained herein shall form the basis of, or be relied upon in connection

with any contract, agreement, undertaking, understanding or any commitment whatsoever. This

Document does not solicit any action based on the material contained herein.

The information in this Document, which does not purport to be comprehensive, is provided by the

Company and has not been independently verified by the Liquidator. While this information has been

prepared in good faith, no representation or warranty, expressed or implied, is or will be made and

no responsibility or liability is or will be accepted by the Liquidator, the Company or by any of its

officers, employees or agents in relation to the accuracy, fairness, authenticity or completeness of

this Document or any other written or oral information made available to any interested party or its

advisers and any such liability is expressly disclaimed. In so far as the information contained in this

Document includes current or historical information, the accuracy, adequacy, authenticity,

correctness, fairness, and completeness of such information cannot be guaranteed. By acceptance of

this Document, the E-Auction Participant(s) shall be deemed to have acknowledged that it has not

relied upon any representation and warranty made by the Liquidator. This document has not been

filed, registered or approved and will or may not be filed, registered, reviewed or approved by any

statutory or regulatory authority in India or by any stock exchange in India or any other jurisdiction.

This Document has not been approved, reviewed or recommended by SEBI.

This Document and information contained herein or disclosed pursuant to the terms of this

Document or any part of it does not constitute or purport to constitute any advice or information in

publicly accessible media and should not be printed, reproduced, transmitted, sold, distributed, or

published by the recipient without prior written approval from the Liquidator. Distributing or taking

/ sending / dispatching / transmitting this Document in certain foreign jurisdictions may be restricted

by law, and Persons into whose possession this Document comes should inform themselves about,

and observe, any such restrictions. Neither the Liquidator, nor his professional advisors, affiliates,

directors, employees, agents, representatives or managers of the process shall be liable for any

damages, whether direct or indirect, incidental, special or consequential including loss of revenue

or profits that may arise from or in connection with the use of this Document, including for the E-

Auction Participant(s) not being selected as a Successful Bidder(s) or on account of any decision

taken by the Liquidator.

The Liquidator and/or the Company give no undertaking to provide the recipient with access to any

additional information or to update this Document or any additional information, or to correct any

inaccuracies in it which may become apparent, and they reserve the right, without giving reasons, at

________________________________________________________________________________________________________

27

any time and in any respect, to amend or terminate the procedures set herein or to terminate

negotiations with any auction process applicant. The issue of this Document shall not be deemed to

be any form of commitment on the part of the Liquidator or the Company to proceed with any

transaction.

In addition to the provisions set out in this Document, the E-Auction Sale Process applicant(s) shall

be responsible for fully satisfying the requirements of the IBC and related Regulations as well as all

laws in force that are or may be applicable to the applicant or the sale process and for obtaining

requisite regulatory or other approvals, if any, that are or may be required under applicable law

and nothing contained in this Document shall be deemed to relieve, wholly or partially, directly or

indirectly, the auction process applicant from compliance with the IBC and related Regulations as

well as any other law in force, and/ or any instrument having the force of law as may be applicable

and nothing in this Document shall be construed as, or operate either, wholly or in part, as

exempting the E-Auction Sale Process Applicant(s) from complying with all such laws, as are or may

be applicable.

By procuring a copy of this Document, the recipient accepts the terms of this disclaimer notice,

which forms an integral part of this Document and all other terms and conditions of this Document.

Further, no Person, including the E-Auction Participant(s) shall be entitled under any law, statute,

rules or regulations or tort, principles of restitution or unjust enrichment or otherwise to claim for

any loss, damage, cost or expense which may arise from or be incurred or suffered on account of

anything contained in this Document or otherwise, including the accuracy, adequacy, authenticity,

correctness, completeness or reliability of the information or opinions contained in this Document

and any assessment, assumption, statement or information contained therein or deemed to form part

of this Document, and the Liquidator, Company, and their advisors, affiliates, directors, employees,

agents, representatives or managers do not have any responsibility or liability for any such

information or opinions and therefore, any liability or responsibility is hereby expressly disclaimed.

In no circumstances shall the E-Auction Participant(s) or its officers, employees, agents and

professional advisers make any contact, direct or indirect, by any mode whatsoever, with the

management, employees, customers, agents or suppliers of the Company until the Liquidator gives

permission to do so in writing.

The assets of the Company are proposed to be sold on “As is where is basis”, “As is what is basis”,

“Whatever there is basis” and “No recourse” basis and the proposed sale of assets of the Company

does not entail transfer of any title except the title which the Company had on its assets as on date of

transfer. The Liquidator does not take or assume any responsibility for any shortfall or defect or

shortcoming in the moveable / immoveable assets of the Company.

________________________________________________________________________________________________________

28

17. ANNEXURES

A. ANNEXURE I

FORMAT FOR AFFIDAVIT AND UNDERTAKING CONFIRMING ELIGIBILITY UNDER

SECTION 29A OF IBC

<<to be executed on Rs.100 stamp paper and notarized>>

Date: [●]

Mr. Om Prakash Agrawal

Liquidator of S. Kumars Nationwide Limited

IBBI Registration no: IBBI/IPA-001/IP-P00201/2017-18/10444

I-21/22, Paragon Centre, Pandurang Budhkar Marg, Worli, Mumbai - 400013.

Sub: Affidavit and Undertaking by [●] on eligibility of [●] under Section 29A of the

Insolvency and Bankruptcy Code, 2016.

Dear Sir,

I [Insert name of the authorized person of the EOI Applicant], son of/ daughter of [●], aged

about [●] years, currently residing at [Address to be inserted] and having Aadhaar / Passport

number [●], an authorised officer of [name of the EOI Applicant] having [registered] office at

[ ] (“EOI Applicant”) , a term which also

includes any person acting jointly with the EOI Applicant), on behalf of the EOI Applicant, do

solemnly affirm and state to Mr. Om Prakash Agrawal, the Liquidator of S. Kumars

Nationwide Limited (“Company/Corporate Debtor”) as follows:

1. That the EOI Applicant or any person acting jointly with the EOI Applicant or in concert

with EOI Applicant or any person who is a ‘connected person’ (as defined under the

Insolvency and Bankruptcy Code, 2016 (“Code”),

a) Is eligible to be a resolution applicant as per its meaning under the Code;

b) Is not an un-discharged insolvent;

c) Is not a wilful defaulter in accordance with the guidelines of the Reserve Bank of India

issued under the Banking Regulation Act, 1949 (10 of 1949);

d) at the time of submission of the EOI and the bid, doesn’t have an account, or an account

of a corporate debtor under the management or control of such person or of whom such

person is a promoter, classified as non-performing asset in accordance with the

guidelines of the Reserve Bank of India issued under the Banking Regulation Act 1949

(10 of 1949) or the guidelines of a financial sector regulator issued under any other law

for the time being in force and at least a period of one year has lapsed from the date of

such classification till the date of commencement of the liquidation process of the

corporate debtor:

________________________________________________________________________________________________________

29

Provided that the person shall be eligible to submit a bid if such person makes payment

of all overdue amounts with interest thereon and charges relating to non-performing

asset accounts before submission of bid;

Provided further that nothing in this clause shall apply to EOI Applicant where such

applicant is a financial entity and is not a related party to the corporate debtor.

Explanation I. - For the purposes of this proviso, the expression "related party" shall

not include a financial entity, regulated by a financial sector regulator, if it is a

financial creditor of the corporate debtor and is a related party of the corporate debtor

solely on account of conversion or substitution of debt into equity shares or

instruments convertible into equity shares, prior to the insolvency commencement date.

Explanation II.— For the purposes of this clause, where a resolution applicant has an

account, or an account of a corporate debtor under the management or control of such

person or of whom such person is a promoter, classified as non-performing asset and

such account was acquired pursuant to a prior resolution plan approved under this

Code, then, the provisions of this clause shall not apply to such resolution applicant for

a period of three years from the date of approval of such resolution plan by the

Adjudicating Authority under this Code.

e) Has not been convicted for any offence punishable with imprisonment

(i) for two years or more under any Act specified under the Twelfth Schedule;

or

(ii) for seven years or more under any law for the time being in force

Provided that this clause shall not apply to a person after the expiry of a period of two

years from the date of his release from imprisonment. Provided further that this clause

shall not apply in relation to a connected person referred to in clause (iii) of Explanation

I;

f) Is not disqualified to act as a director under the Companies Act, 2013 (18 of 2013):

Provided that this clause shall not apply in relation to a connected person referred to in

clause (iii) of Explanation I;

g) Is not prohibited by the Securities and Exchange Board of India from trading in

securities or accessing the securities markets;

h) Has not been a promoter or in the management control of a corporate debtor in which a

preferential transaction, undervalued transaction, extortionate credit transaction or

fraudulent transaction has taken place and in respect of which an order has been made

by the Adjudicating Authority under this Code; Provided that this clause shall not

apply if a preferential transaction, undervalued transaction, extortionate credit

transaction or fraudulent transaction has taken place prior to the acquisition of the

corporate debtor by the resolution applicant pursuant to a resolution plan approved

under this Code or pursuant to a scheme or plan approved by a financial sector

regulator or a court, and such E-Auction Sale Process Applicant has not otherwise

contributed to the preferential transaction, undervalued transaction, extortionate credit

transaction or fraudulent transaction;

________________________________________________________________________________________________________

30

i) Has not executed a guarantee in favour of a creditor in respect of a corporate debtor

against which an application for insolvency resolution made by such creditor has been

admitted under this Code and such guarantee has been invoked by the creditor and

remains unpaid in full or part;

j) subject to any disability, corresponding to clauses (a) to (h), under any law in a

jurisdiction outside India; or

k) does not have a connected person not eligible under clauses (a) to(i)

Explanation I - For the purposes of this clause, the expression “connected person” means

I. Any person who is the promoter or in the management or control of the E-Auction

Sale Process applicant; or

II. Any person who shall be the promoter or in management or control of the assets of

the Company pursuant to sale thereof as part of the liquidation process of the

Company; or

III. The holding company, subsidiary company, associate company or related party of a

person referred to in clauses (i) and (ii)

Provided that nothing in clause (iii) of this Explanation I shall apply to EOI Applicant where

such applicant is a financial entity and is not a related party of the corporate debtor,

Provided further that the expression "related party" shall not include a financial entity,

regulated by a financial sector regulator, if it is a financial creditor of the corporate debtor and

is a related party of the corporate debtor solely on account of conversion or substitution of debt

into equity shares or instruments convertible into equity shares, prior to the insolvency

commencement date

Explanation II—For the purposes of this section, "financial entity" shall mean the following

entities which meet such criteria or conditions as the Central Government may, in consultation

with the financial sector regulator, notify in this behalf, namely: —

(a) a scheduled bank;

(b) any entity regulated by a foreign central bank or a securities market regulator or other

financial sector regulator of a jurisdiction outside India which jurisdiction is compliant

with the Financial Action Task Force Standards and is a signatory to the International

Organisation of Securities Commissions Multilateral Memorandum of Understanding;

(c) any investment vehicle, registered foreign institutional investor, registered foreign

portfolio investor or a foreign venture capital investor, where the terms shall have the

meaning assigned to the min regulation 2 of the Foreign Exchange Management (Transfer

or Issue of Security by a Person Resident Outside India) Regulations, 2017 made under the

Foreign Exchange Management Act, 1999 (42 of1999);

(d) an asset reconstruction company register with the Reserve Bank of India under section 3 of

the Securitisation and Reconstruction of Financial Assets and Enforcement of Security

Interest Act, 2002 (54 of 2002);

________________________________________________________________________________________________________

31

(e) an Alternate Investment Fund registered with Securities and Exchange Board of India;

(f) such categories of persons as may be notified by the Central Government.”

2. That the EOI Applicant unconditionally and irrevocably undertakes that it shall provide

all data, documents and information as may be required to verify the statements made

under this affidavit.

3. That in the event any of the above statements are found to be untrue, incomplete or

incorrect, then the EOI Applicant unconditionally agrees to indemnify and hold

harmless the Liquidator against any losses, claims or damages incurred by the

Liquidator on account of such ineligibility of the EOI Applicant.

4. That the list of the connected persons of the EOI Applicant set out in hereto is

exhaustive and complete in all respects and the names of all the connected persons of the

EOI Applicant have been set out thereunder without any omission whatsoever

5. I declare and undertake that in case [name of EOI Applicant or the person acting jointly

with it or any of the connected person(s)] becomes ineligible at any stage during the

Liquidation Process; it would inform the Liquidator forthwith on becoming ineligible.

6. I also undertake that in case [name of EOI Applicant or the person acting jointly with it

or any of the connected person(s)] becomes ineligible at any time during the auction/bid

process for sale of assets of the Company including after submission of Earnest Money

Deposit (“EMD”) towards bid, then the EMD would be forfeited and the same would be

deposited in the account of S. Kumars Nationwide Limited – in liquidation

7. I also further undertake that my bid Amount will remain binding unless rejected by the

Liquidator.

8. I confirm that the said declaration and disclosure is true and correct, and I agree to

compensate the Liquidator for any cost incurred in relation to ascertaining the veracity

of this declaration.

9. I am duly authorized to submit this declaration by virtue of [●]. The said document is

true, valid and genuine to the best of my knowledge, information and belief.

(DEPONENT)

________________________________________________________________________________________________________

32

VERIFICATION

I, the deponent above, do hereby solemnly declare and affirm that the above statement given

by me is true and correct to the best of my knowledge and belief and nothing stated above is

false or misrepresentation or misleading.

(DEPONENT)

________________________________________________________________________________________________________

33

B. ANNEXURE II

BID APPLICATION FORM

(Please fill up separate Bid application forms for each property)

Date:

Dear Sir,

I am desirous in participating in the E-Auction of High Value Cotton Fabric Manufacturing

Unit at Bharuch (Gujarat) owned by S Kumars Nationwide Limited-In Liquidation as going

business forming part of Liquidation Estate formed by the Liquidator, appointed by the

Hon’ble National Company Law Tribunal, Mumbai Bench vide order dated June 19, 2019.

Details of Corporate Debtor:

Name S Kumars Nationwide Limited – In Liquidation

Account Number 0187102000006224

Bank Name IDBI Bank Limited

Branch Lower Parel

IFSC Code IBKL0000187

Details of Bidder(s)

Name of the Bidder

Constitution of Bidder

Contact No.

Email ID

PAN No.

Details of Division / Asset:

Lot No. / Block of Assets in sale notice for which Earnest

Money deposited

________________________________________________________________________________________________________

34

I/ We/M/s. also enclose copies of the required KYC documents. We request you to kindly

verify the same and arrange with the auction portals for issue of an ID and password for us to

enable us to take part in the E- Auction.

Place:

Date:

Signature

(Seal in case of company / firm)

Terms and Conditions of the E-auction are as under:

In addition to the Process Memorandum, following terms and conditions apply:

1. E-Auction will be conducted on “As is where is basis”, “As is what is basis”, “Whatever

there is basis”, and “No recourse basis” through approved service provider M/s e-

procurement Technologies Limited (Auction Tiger)

2. The complete E- Auction Process Memorandum containing Terms and Conditions of E-

Auction, E- Auction Bid form, Eligibility Criteria, Declaration by Bidders, Description of

Assets etc. are available on website https://ncltauction.auctiontiger.net Contact: Mr. Vijay

Shetty at +91 9619002431 / 6352490773 or email at vijay.shetty@auctiontiger.net. (On going

to the https://ncltauction.auctiontiger.net, interested bidders will have to search for the

mentioned company using either one of the two options, (i) Company’s name (S Kumars

Nationwide Limited) or by (ii) State and property type)

3. The intending bidders are required to deposit Earnest Money Deposit (EMD) amount by

Monday i.e. January 13, 2020 till 5.00 PM either through NEFT/RTGS in the Account of “S.

Kumars Nationwide Limited - In Liquidation”, Account No.: 0187102000006224, IDBI Bank,

Branch: Lower Parel, Mumbai, IFSC Code – IBKL0000187, drawn on any Scheduled Bank.

Payment of EMD by Bank DD is required to be deposited by January 8, 2020.

4. The Name of the intending Bidders eligible to participate in e-auction on the portal

(https://ncltauction.auctiontiger.net) shall be identified by the Liquidator and the E-auction

service provider (Auction tiger) will provide User ID and password by email to eligible

bidders.

5. The EMD of the Successful Bidder shall be allowed to be set-off against or used as part of the

sale consideration in the final payment only and the EMD of unsuccessful bidders shall be

refunded with 7 (seven) days.

6. The Successful Bidder shall bear the applicable stamp duties/transfer charge, fees etc. and all

the statutory / non- statutory dues, taxes, rates, assessment charges, fees etc. in respect of the

property put on auction.

7. The sale certificate/agreement will be issued in the name of the successful bidder only and will

not be issued in any other name.

8. The Eligible Bidders, participating in the E-Auction, will have to bid for at least the Reserve

Price, and increase their bid by a minimum incremental amount as mentioned in the table

above.

________________________________________________________________________________________________________

35

9. The Liquidator has the absolute right to accept or reject any or all offer(s) or

adjourn/postpone/cancel the e- Auction or withdraw any property or portion thereof from the

auction proceeding at any stage without assigning any reason thereof.

10. The sale shall be subject to provisions of Insolvency and Bankruptcy Code, 2016 and

Regulations made there under.

11. E-auction date & Time: Thursday, January 16, 2020 at 11.00 am to 1.00 pm (with unlimited

extension of 10 min)

12. The Bidders should make their own Independent inquiries regarding the encumbrances, title

of assets put on auction and claims/rights/dues/ affecting the assets and should conduct

their own prior to submitting their bid. The E-Auction advertisement does not constitute and

will not be deemed to constitute any commitment or any representation of the Liquidator. The

property is being sold with all the existing and future encumbrances/ claims/ dues/demands

whether known or unknown to the Liquidator. Liquidator shall not be responsible in any of way

for any third-party claims/rights/dues.

13. It should be the responsibility of the interested bidders to inspect and satisfy themselves about

the property before submission of the bid.

14. Liquidator has right to demand documents from bidder for the process and in case the

documents are not provided, the liquidator may disqualify the bid.

15. The e-Auction/ bidding of above properties would be conducted exactly on the schedule Date

& Time as mentioned against each property by way of inter-se bidding amongst the bidders.

The bidder may improve their offer in multiple of amount mentioned under the column “Bid

Increment Amount” against each property. In case bid is placed in the last 10 minutes of the

closing time of the e-auction, the closing time will automatically get extended for 10 minutes.

16. The decision of Liquidator on declaration of successful bidder shall be final and binding on all

the Bidders.

Date:

Place:

________________________________________________________________________________________________________

36

C. ANNEXURE III

DECLARATION BY BIDDERS(S)

To,

Mr. Om Prakash Agrawal

The Liquidator,

S Kumars Nationwide Limited (In Liquidation)

Sir,

1. I / We do hereby state that I/We have read the entire terms and conditions governing the

auction of Assets of S Kumars Nationwide Limited - In Liquidation, as specified in the

Process Memorandum dated December 12, 2019 and have understood them fully. I/We

hereby unconditionally agree to confirm with and to be bound by the said terms and

conditions and agree to take part in the e-auction process.

2. I/ We declare that the Earnest Money and the deposit towards purchase – price have been

made by me/us as against my/our bid and that the particulars of remittance and all other

information given by me/us in the online form is true and correct.

3. I/ We further understand and agree that if any of the statement / information revealed by

me/us is found to be incorrect and / or untrue, the bid submitted by me/ us is liable to be

cancelled and in such case, the Earnest Money and / or any monies paid by me/us is liable

to be forfeited by the Seller and that the Seller will be at liberty to annul the offer made to

me/us at any point of time.

4. I/ We also agree that after my/ our offer given in my/our bid for purchase of property (ies)

is accepted by the Seller and if, I/ We, fail to accept or act upon the terms and conditions of

the sale or am/are not able to complete the transaction within the time limit specified for

any reason whatsoever and/or fail to fulfil any/all the terms and conditions of the auction

and offer letter, the Earnest Money and other monies paid by me/us along with the online

form and thereafter, are liable to be forfeited. The timeline for payment of final sale

consideration may be extended by sole discretion of liquidator, to the extent permissible

under the applicable laws and regulations. In case final sale consideration is not paid within

stipulated timeline, the liquidator shall forfeit Earnest Money.

5. I/ We understand that the Earnest Money of all Bidders shall be retained by the Liquidator

and returned only after the conclusion of the auction process as per the timelines mentioned.

I/We, state that I/We have fully understood the terms and conditions therein and agree to be

bound by the same.

6. I/ We confirm that our participation in the e-auction process, submission of bid or

acquisition of the Assets pursuant to the provisions of the Process Memorandum will not

conflict with, or result in a breach of, or constitute a default under (i) our constitutional

documents; or (ii) any applicable laws; or (iii) any authorisation or approval of any

________________________________________________________________________________________________________

37

government agency or body; or (iv) any judgement, order, injunction, decree, or ruling of

any court or governmental authority, domestic or foreign binding on me/ us; or (v) any

agreement to which I am / we are a party or by which I am / We are bound.

7. The decision taken by the Liquidator with respect to the selection of the Successful Bidder

and communicated to us shall be binding on me/us.

8. I/ We also undertake to abide by the additional conditions if announced during the e-auction

including any announcement (s) on correction of and/ or additions or deletions to the time

of auction portal and Assets being offered for sale.

9. I/We confirm that the Seller and/or his professional advisors, affiliates, directors,

employees, agents, representatives or managers of the process, shall not be liable and

responsible in any manner whatsoever for my/our failure to access and bid on the e-auction

portal due to any unforeseen circumstances etc. before or during the auction event.

10. I/We hereby confirm that I/we are eligible to purchase the assets of the Company under

Section 29A of the Insolvency and Bankruptcy Code, 2016 (as amended from time to time)

(Signature)

Name:

Address:

Email ID:

Mobile:

________________________________________________________________________________________________________

38

D. ANNEXURE IV

TECHNICAL TERMS & CONDITIONS OF E-AUCTION SALE

1. Intending bidders shall have a valid e-mail ID, valid PAN Card and KYC document to

register with the E- Auction Service Provider.

2. Intending bidders must register with the e-auction service provider.

3. Only upon verification of the Online Form and confirmation of remittance of Earnest

Money will the Eligible Bidders be declared and thereafter, permitted to access the Platform

for bidding for a particular Property/Asset.

4. The Bidder shall be solely responsible for all consequences arising out of the bid submitted

by him (including any wrongful bidding) and no complaint/ representation will be

entertained in this regard by the Agency/ the Seller. Hence, Bidders are cautioned to be

careful to check the bid amount and alter/ rectify their bid if required before confirming the

bid submitted.

5. Bidders should not disclose their User ID as well as password and other material

information relating to the bidding to anyone to safeguard its secrecy.

6. Bidders are advised to change the password immediately on receipt thereof.

7. The Affidavit and declaration as per the format set out in Annexure I and Annexure III

must be executed in accordance with applicable law and it must be in issued in accordance

with the constitutional documents of the Bidder, if applicable, after obtaining all corporate

approvals as may be required. The extract of constitutional documents and certified copies

of the corporate approvals must be enclosed with the declaration. In case of Bidder being an

individual, the declaration must be personally signed by the Bidder. In case the Bidder is

not an individual, the declaration must be signed by a who is duly authorized to sign the

same.

8. All the aforementioned documents are required to be uploaded on the portal and the original

physical copies thereof shall be provided by the Successful Bidder to the Seller in

accordance with the Process Memorandum.

9. All bids placed are legally valid bids and are to be considered as bids from the Bidder

himself. Once the bid is placed, the Bidder cannot reduce or withdraw the bid for whatever

reason. If done so, the Earnest Money amount shall be forfeited.

10. The highest bid on the auction shall supersede all the previous bids of the respective

Bidders. The Bidder with the highest offer/ bid does not get any right to demand for

acceptance of his bid.

11. After the conclusion of the e-auction for each Asset, the Successful Bidder shall be

informed through a message generated automatically by the portal, of the outcome of the e-

________________________________________________________________________________________________________

39

auction. A separate Intimation shall also be sent to the Successful Bidder. Date of sending

the e-mail will be considered as the date of receipt of the Intimation i.e. Date of Intimation.

12. Bidders may encounter certain unforeseen problems such as time lag, heavy traffic, and

system/ power failure at the Bidder’s end. To avoid losing out on bidding because of

above-mentioned reasons, it is advised not to wait for the last moment.

________________________________________________________________________________________________________

40

E. ANNEXURE V

LETTER OF INTENT

To, [name to be inserted]

[address to be inserted]

Attn. [ ]

Re: Auction sale of Asset Lot number [•] (insert description of asset) of S. Kumars Nationwide

Limited (In Liquidation) conducted on _____________.

Dear Sir/ Ma’am,

1. With reference to the above, successful bid was submitted by yourself___________

(“Successful Bidder”) in relation to E-auction sale of Asset (Asset or Asset Lot No__) of S.

Kumars Nationwide Limited (In Liquidation) (“Company”) auctioned on __________.

2. You are requested to confirm your acceptance of this LoI within 2 (two) days of the date of

issuance hereof with an endorsement stating that this LoI is, “Accepted Unconditionally”,

under the signature of the authorised director / authorised signatory. Within 90 (ninety) days

from the date of issuance of this LoI, you shall pay an aggregate amount of INR

________________ as the sale consideration towards purchase of assets comprised in Lot

number __ (“Sale Consideration”) plus any applicable GST, if any, on 100% of the Sale

Consideration, and as set out in the schedule to this LoI. Please note that, failure to accept

this LoI within the time period specified may result in your disqualification as the Successful

Bidder along with cancellation of this LoI and forfeiture of the Earnest Money deposited, in

relation to the captioned transaction issued by the Liquidator (“E-Auction Sale Process

Memorandum”).

3. The Liquidator agrees that simultaneously upon full payment of Sale Consideration and any applicable GST, if any, the Liquidator shall execute a deed of sale in your favour for conveyancing on “as is where is”, “as is what is”, “whatever there is” and “no recourse” basis of the specified Asset Lot, without any representations and warranties on the part of the Liquidator for any encumbrances / statutory liabilities etc. in relation to Asset Lot __.

4. This LoI is not a sale confirmation letter and is issued without prejudice to other terms and

conditions of the E-Auction Sale Process Memorandum. The issuance of this LoI shall not

be deemed to be conveying any right, title or interest in the Company or in any manner granting any right against the Liquidator, or their representatives and advisors, except to the

extent any right has been created under this LoI.

5. In the event you are found to have made any misrepresentation, wrongful disclosure or

misleading declaration of eligibility, this LoI may be revoked and on account of such

revocation you shall have no right under this LoI.

6. Any contravention of the terms of this LoI, including non- acceptance of the contents hereof

within the stipulated time period, shall lead to cancellation of this LoI, unless otherwise

provided in the Asset Sale Process Memorandum.

________________________________________________________________________________________________________

41

7. You shall keep the contents of this LoI confidential, save and except where any disclosure is required under applicable laws or a disclosure is required for securing financing or to your

professional advisors and financiers, who are in each case required in the course of their duties to receive and consider the same for the purpose of advising you in relation to the

transaction.

8. This LoI shall be governed by, and construed in accordance with, the laws of India and the

National Company Law Tribunal, Mumbai Bench shall have exclusive jurisdiction over all

disputes arising under, pursuant to and/ or in connection with this LoI.

9. Capitalised terms used but not defined herein shall have the meaning ascribed to them in the

Asset Sale Process Memorandum.

You are requested to unconditionally accept this LoI by countersigning this LoI and returning the

same to me.

Yours faithfully,

___________________

Liquidator

Unconditionally agreed and accepted by:

For

___________________

Authorized Signatory

________________________________________________________________________________________________________

42

F. ANNEXURE VI

DESCRIPTION OF ASSETS

The company owns a contiguous land parcel admeasuring 90.71 acres comprises of Leasehold

and Freehold land, as per following details:

SKNL proposes sale of High Value Fine Cotton Fabric Manufacturing Unit at Bharuch (Gujarat)

business as a going concern which includes Leasehold Land, and Freehold Land, Factory

Building, Plant and Machinery, Furniture and Fixtures and net current assets pertaining to the

Unit [Current Assets – Current Liabilities (Refer to liabilities accrued on or after the

commencement of Corporate Insolvency Resolution Process i.e. April 24, 2018)] and the

Brands/ Trademarks owned by S. Kumars Nationwide Limited along with licences, permits,

approvals and registrations to the extent they are transferable under the applicable law on “As is

where is basis”, “As is what is basis”, “Whatever there is basis”, and “No recourse basis”.

The proposed sale of assets of the Company does not entail transfer of any title except the title

which the Company had on its assets as on date of transfer of the Unit.

Lot No. 1:

Leasehold Land:

Part of Plot no. 825 of Jhagadia GIDC, Bharuch in the village Dadheda, Jhagadia Taluka,

Bharuch District, Gujarat having a total land area of 42.04 acres / 1,70,133 sq. mt. or 18,31,294

sq. ft. This land is leasehold land from GIDC and is subject to sub-division.

Factory building:

Plant building along with ancillary structures having total built up area of 61,994 sq. mt. or

6,67,298 sq. ft. This also includes land developments in form of boundary walls, Sewage line,

streetlights, internal roads etc as mentioned in subsequent pages.

Plant and Machinery:

Plant and Machinery which includes all the machineries installed for manufacturing of fabric as

well as equipment installed in utility such as boiler, DG set, ETP, STP etc. This also includes

furniture & fixture, office equipment, Computers and vehicles as mentioned in subsequent pages

Brands & Trademarks:

Following are live Brands & Trademarks owned by SKNL registered under Trade Marks Act,

1999:

Sr.

No. Name Regn. No Class Validity Goods in respect of class

1. Baruche 1867185 24

25-Sep-29 Textile piece goods

25 Readymade Garments

2. Belmonte 1883643 24

11-Dec-29 Textile piece goods

25 Readymade Garments

3. Carmichael 1387057 24 23-Sep-25 24-Textile piece fabrics

________________________________________________________________________________________________________

43

Sr.

No. Name Regn. No Class Validity Goods in respect of class

House 25 23-Sep-25 25-Readymade garments

4. Carmichael

House (Label) 1538451

24 09-Mar-27 24-Textile piece fabrics

25 09-Mar-27 25-Readymade garments

5. Kruger 2030415 25 20-Sep-20 Clothing (Readymade Garments)

6. Tamariind 2347556 24 13-Jun-22 Textile piece goods

7. World Player 916704 24 04-Jul-20 Textile piece goods

8. World Player 1395038 25 27-Oct-25 Readymade garments, clothing,

footwear, headgear.

9. Balmoral 945128 24 04-Aug-20 Textile piece goods.

10. Balmoral 945127 25 04-Aug-20 Readymade garments

11. Cinnamon 944889 24 03-Aug-20 Textile piece goods

12. Cinnamon 944888 25 03-Aug-20 Clothing (readymade garments),

hosiery, footwear and headgear

13. Clove 981255 24 03-Jan-21 Textile piece goods

14. Clove 981256 25 03-Jan-21 Readymade garments.

15. Crespo 1092240 24 04-Apr-22 Textile piece goods.

16. Linkool 1092245 24 04-Apr-22 Textile piece goods, shirting.

17. Manhattan

Farbriano 926018 24 22-May-20

Textile piece goods including

fabrics, shirting and suiting’s.

18. Mistral 1092250 24 04-Apr-22 Textile piece goods including

fabrics, shirting and suiting.

19. Triple Nine 865112 24 07-Dec-29 Tissues (piece goods) Bed and

table covers, textile articles.

20. TWS 996602 24 14-Mar-21 Textile piece goods.

21. TWS 996603 25 14-Mar-21 Clothing (readymade garments),

hosiery, footwear and headgear.

22. Belmonte 2152510 99

31-May-21 Cl.9-Sunglasses

(Cl.9&14) cl.14-Watches

23. Cinnamon

(Label) 953904 3 09-Jun-20 Perfumery, cosmetic

24. Cinnamon 953907 18 09-Jun-20 Leather imitation leather material

25. Sks White 953900 9 09-Jun-20 Personal diaries, electrical and

electronic apparatus, etc.

26. Sks White 953903 14 09-Jun-20

Precious metals, metals and their

alloys and goods in precious

metals

27. Sks White 953902 18 09-Jun-20 Leather imitation leather material

28. Spice Up Your

Dressing 978048 3 19-Dec-20 Perfumery, cosmetic

29. Spice Up Your

Dressing 978047 9 19-Dec-20

Scientific, electric, photographic

optical and teaching apparatus and

instruments

30. Spice Up Your

Dressing 978046 14 19-Dec-20

Precious metals, metals and their

alloys and goods in precious

metals

31. Spice Up Your Dressing

978045 18 19-Dec-20 Leather imitation leather material

________________________________________________________________________________________________________

44

Sr.

No. Name Regn. No Class Validity Goods in respect of class

32. Streets of

Chennai 2200721 35 09-Jun-21

Retail services in relation to

clothing, Buying & selling of

fabrics, Retail store services

33. Streets of

Kolkata 2200722 35 09-Jun-21

Retail services in relation to

clothing, Buying and selling of

fabrics, Retail store services

34. Streets of

Mumbai 2200724 35 09-Jun-21

Retail services in relation to

clothing, Buying and selling of

fabrics, Retail store services

35. Streets of Delhi 2200723 35 09-Jun-21

Retail services in relation to

clothing, Buying and selling of

fabrics, Retail store services

36. Streets of

Bangalore 2200720 35 09-Jun-21

Retail services in relation to

clothing, Buying and selling of

fabrics, Retail store services

37. Streets of Pune 2200719 35 09-Jun-21

Retail services in relation to

clothing, Buying and selling of

fabrics, Retail store services

38. Streets of

Hyderabad 2200726 35 09-Jun-21

Retail services in relation to

clothing, Buying and selling of

fabrics, Retail store services

39. TWS 996599 3 14-Mar-21 Perfumery, cosmetic

40. TWS 996607 9 14-Mar-21

Scientific, electric, photographic,

optical and teaching apparatus and

instruments

41. TWS 996606 14 14-Mar-21

Precious metals, metals and their

alloys and goods in precious

metals

42. TWS 996605 16 14-Mar-21

Printed matter, namely

publications, electronic,

publications, books, periodicals,

newsletters, magazines, etc.

Net Current Assets:

Net Current Assets (Current Assets less Current Liabilities) amounting to Rs 5 crore approx. as

on date. The Current Assets will not include the Debtors / Claims which are under litigation as

on date of transfer of Unit.

The Value of the Net Current Assets shall be determined by an independent Chartered

Accountant / Valuer appointed by the Liquidator. Such value shall be final and binding upon the

Successful Bidder.

________________________________________________________________________________________________________

45

1. Building details

Building description:

The total land area underneath the plant measures 42.04 acres out of 70.61 acres and it

comprises main factory building and other miscellaneous building like power plant, boiler

house, ETP, STP, stores, weigh bridge, security office. Construction of all building completed

by year 2009. Total built area including auxiliary buildings is 61,994 Sq.mtr. Details of the

built-up area, type of the structure and year of construction is mention in table below:

Sr. No Name of Building

Built up

area

(Sqm)

Type of structure Year of

construction

Condi

tion

Main plant building

1 Process House 21,285.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

2 Admin Building & Display

Room 860.00

RCC frame structure with RCC slab

roofing 2009 Fair

3 Yarn Dyeing 972.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

4 Grey Yarn Store 2,018.25 RCC column with MS Truss and A

C sheet roofing 2009 Fair

5 Dyed Yarn Store 2,118.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

6 Winding department 1,184.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

7 TFO 1,213.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

8 Humidification plant (GF) 1,746.00 RCC frame structure with RCC slab

roofing 2009 Fair

9 Humidification plant (FF) 530.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

10 Warper Department 3,960.25 RCC column with MS Truss and A

C sheet roofing 2009 Fair

11 Weaving Preparation (with

Sizing department) 2,768.00

RCC column with MS Truss and A

C sheet roofing 2009 Fair

12 Drawing 800.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

13 Beam storage 520.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

14 Scrape Storage and dispatch

area 2,722.50

RCC column with MS Truss and A

C sheet roofing 2009 Fair

15 Weaving area (Office & toilet

blocks) 6,960.00

RCC column with MS Truss and A

C sheet roofing 2009 Fair

16 Reed cleaning 150.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

________________________________________________________________________________________________________

46

Sr. No Name of Building

Built up

area

(Sqm)

Type of structure Year of

construction

Condi

tion

17 Grey Store 2,681.25 RCC column with MS Truss and A

C sheet roofing 2009 Fair

18 Canteen 937.50 RCC frame structure with RCC slab

roofing 2009 Fair

19 First Floor of Canteen 667.50 RCC column with MS Truss and A

C sheet roofing 2009 Fair

20 Compressor room 300.00 RCC frame structure with RCC slab

roofing 2009 Fair

21 Passage 2,247.00 2009 Fair

Auxiliary buildings

22 Finished fabric store 1,680.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

23 General Store 715.20 RCC column with MS Truss and A

C sheet roofing 2009 Fair

24 Workshop & HT Room 737.55 RCC column with MS Truss and A

C sheet roofing 2009 Fair

25 Stores / Office / Toilets 742.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

26 Power Plant 1,287.00 RCC column with MS Truss and A

C sheet roofing 2009 Fair

27 Gate Cabin 12.00 RCC frame structure with RCC slab

roofing 2009 Fair

28 Retail Store 180.00 RCC frame structure with RCC slab

roofing 2009 Fair

Total 61,994.00

________________________________________________________________________________________________________

47

2. Plant and Machinery Details

The SKNL, Bharuch plant has a capacity of manufacturing 12.50 -million-meter and processing

& finishing capacity of 18 million-meter of cotton fabric per year. The plant also has a facility of

Dyeing of Yarn. It has total Nos. of 7 divisions which are named as Dyeing,

Winding/Unwinding, Warping, sizing, Drawing-In, Weaving and Processing unit. Each unit

perform a specific task for an end to end process of manufacturing of cotton fabric from cotton

yarn. Machines that are installed in the facility according to process are Winding, Dyeing, drier,

unwinding, warping, sizing, drawing-in, looms, inspection, batching, pad-dry, CPB, singeing,

desizing, mercerizer, stenter, sanforizer, calendaring and packaging machines. There are many

auxiliary machines installed for the operation in the plant are Boilers, Air compressors, Gas

compressors, Chillers, Gas generator and CRP plant.

The Bharuch Unit is currently operating at around 30% of capacity.

The list below tabulates the make, technical details, year of installation, operating status of the

main machineries at present:

Sr. No. Name of Machine Section Make Qty Capacity YOI

1 Dyeing Machine Yarn Dyeing

Drier Thies AG, Switzerland 2 4.5 Ton/day 2010

Large Dyer Thies AG, Switzerland 5 4.5 Ton/day-594

Kg/slot 2010

Small Dyer Thies AG, Switzerland 10 2010

2 Winding/unwinding

Machine Winding

Winding Machine OerlikonSchlafhorst –

Germany 4

60 heads-8

ton/day 2009

Unwinding Machine OerlikonSchlafhorst –

Germany 2

60 heads-8

ton/day 2009

Unwinding Machine OerlikonSchlafhorst –

Germany 2

50 heads-8

ton/day 2009

3 Warping Machine Warping

Sample warping SUZUKI-Almundo

Associates, Japan 2

7/14/21 meter-

180 Cm width 2009

Direct Warping Benninger AG, Switzerland 1

6 set per day-180

cm Width- 5000

mtr to 1 Lakh

mtr beam per

day capacity

2009

Sectional Warping Benninger AG, Switzerland 4

6 set per day-180

cm Width- 1000

mtr per beam

only

2009

Desk Sample warping

CCI 2 3 set per day-180

cm Width 2009

________________________________________________________________________________________________________

48

Sr. No. Name of Machine Section Make Qty Capacity YOI

4 Sizing Machine Sizing

CTB Machine Benninger AG, Switzerland 1 15 Beam/Day 2010

BTB Machine Benninger AG, Switzerland 1 15 Beam/Day 2010

Sample sizing Machine Yamada 1 2009

5 Drawing-In Drawing

Manual StabuliSargans AG,

Switzerland 12

1.25 Lacs ends

per day 2009

Automatic StabuliSargans AG,

Switzerland 2

720 fibre

drawing at a

time from beam

2009

6 Looms Machine Weaving

Rapier Looms Picanol-Optimax 70

190 cm Width-6

Beam per day

per Machine-650

RPM-85%

Effieciency-

1200 mtr avg

beam length-

Production

capacity 4000

meter to 8800

meter

2009

Airjet Looms Picanol-Omniplus 800 60

190 cm Width-6

Beam per day

per Machine-850

to 1050 RPM-

85%

Effieciency-

1200 mtr avg

beam length-

Production

capacity 3300

meter to 17000

meter

2010

Desk Sample looms CCI 2 6 Beam per day

per Machine 2010

7 Inspection Machine Weaving

Inspection Machine Yash textile market 7 50 mtr/min 2010

Batching Unit Yash textile market 1 50 mtr/min-

46080 mtr/day 2010

8 Pad-Dry Machine Processing

Pad-Dry Machine A MonfortsTextile machine

GMBH Germany 1

80 mtr/min-2500

mtr per shade 2011

CPB-dry Machine Benninger AG, Switzerland 1 50 mtr/min-2500

mtr per shade 2010

9 Singeing Machine Processing

Singeing Machine Osthoff - Senge System 1 80 mtr/min-320

cm 2010

10 Continuous Scouring

& Bleaching Machine Processing

________________________________________________________________________________________________________

49

Sr. No. Name of Machine Section Make Qty Capacity YOI

Extracta Benninger AG, Switzerland 1 80 mtr/min 2010

Impacta

11 Mercerizing Machine Processing

Mercerizer Benninger AG, Switzerland 1 80 mtr/min-

70560 mtr/min

2010

12 Stenter Machine Processing

Stenter- 8 Chamber A

MonfortsTextilmaschinen

GMBH Germany

1

60% efficiency-

148 width+3000

mtr/hr-190 C-

60480 mtr/day

2010

Stenter- 6 Chamber A

MonfortsTextilmaschinen

GMBH Germany

1

60% efficiency-

148 width+3000

mtr/hr-190 C-

51840 mtr/day

2011

13 Shrinking Range For

Processing Machine Processing

Sanforizer Machine A

MonfortsTextilmaschinen

GMBH Germany

1 3000 mtr/hr- 150

C-51840 mtr/day 2010

14 HYCON

CALENDER Processing

Calendering Machine AndritzKusters GMBH &

Co., GE 1

3600 mtr/hr-150

C-51480 mtr/day 2010

15 Packaging Processing

Inspection Machine Yash textile market 7 50 mtr/min 2010

Packaging Machine Yash textile market 1 80 mtr/min 2010

OTC packging

Machine Yash textile market 1 80 mtr/min 2010

The list below tabulates the make, technical details of the Auxiliary Machineries:

Sr. No Name of Machine Make Qty Capacity YOI

1 Boiler 1 12 ton/hr- 10.54 KG

pressure

2 Chiller Turbomach,

Switzerland 2

2000 KL-storing

capacity 2011

3 Caustic Soda Recovery System Korting Hannover

AG, Germany

4 Dehumidification Plant

Winding 1 2010

Weaving 2 2010

Warping 1 2010

5 Gas Compressor Enerproject SA,

Switzerland 1

2200 N/m3-265 KW-

2980 RPM 2011

6 Air Compressor

Atlas Copco

Airpower NV

Belgium

1 5206 CFM 2009

________________________________________________________________________________________________________

50

Detailed List of Plant and Machinery at Bharuch Plant:

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

Plant and Machinery

1

Winding

AUTO CORNER - 1-SOFT-

REWINDING 1

60 Spindle 19.3

KG/ SPINDLE

Type Autocorner 338 E

/ 60 Head Working

2 AUTO CORNER - 2-SOFT-

REWINDING 1

60 Spindle 19.3

KG/ SPINDLE

Type Autocorner 338 E

/ 60 Head Working

3 AUTO CORNER - 3-SOFT-

REWINDING 1

60 Spindle 19.3

KG/ SPINDLE

Type Autocorner 338 E

/ 60 Head Working

4 AUTO CORNER - 4-

REWINDING 1

60 Spindle 19.3

KG/ SPINDLE

Type Autocorner 338 E

/ 60 Head Working

5 AUTO CORNER - 5-

REWINDING 1

60 Spindle 8.8

KG/SPINDLE

Type Autocorner 338 E

/ 60 Head Working

6 AUTO CORNER - 6-

REWINDING 1

60 Spindle 8.8

KG/SPINDLE

Type Autocorner 338 E

/ 60 Head Working

7 AUTO CORNER - 7-

BOTTOM-REWINDING 1

50 Spindle 8.8

KG/SPINDLE

Type Autocorner 338 E

/ 50 Head Working

8 AUTO CORNER - 8-

BOTTOM-REWINDING 1

50 Spindle 8.8

KG/SPINDLE

Type Autocorner 338 E

/ 50 Head Working

9

Sample

Warper

SUZUKI SAMPLE

WARPER -1 MODEL

:NAS-140CW

1

Warping Width

:2250 , Drum

Circumstance :7

Meter

3BEAMS/DAY

Suzuki :NAS-140CW-

2250 Working

10

SUZUKI SAMPLE

WARPER -2 MODEL

:NAS-140CW

1

Warping Width

:2250 , Drum

Circumstance :7

Meter

3BEAMS/DAY

Suzuki: NAS-140CW-

2250 Working

11

Warping

DIRECT WARPING -1 1

Benninger high

speed warping

machine

6SET/DAY

(DYED)

Ben-Direct-800-1800-

GV /optostop-720 Working

12 SECTIONAL WARPING -1 1

Benninger high

speed warping

machine 6

BEAMS/DAY

Beninger Type

Ergotec-2200-GP-

W/ISTONS-720

Working

13 SECTIONAL WARPING -2 1

Benninger high

speed warping

machine 6

BEAMS/DAY

Beninger Type

Ergotec-2200-GP-

W/ISTONS-720

Working

14 SECTIONAL WARPING -3 1

Benninger high

speed warping

machine 6

BEAMS/DAY

Beninger Type

Ergotec-2200-GP-

W/ISTONS-720

Working

15 SECTIONAL WARPING -4 1

Benninger high

speed warping

machine 6

BEAMS/DAY

Beninger Type

Ergotec-2200-GP-

W/ISTONS-720

Working

________________________________________________________________________________________________________

51

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

16

CCI

SAMPL

E

WEAVI

NG

CCI SAMPLE LOOM NO -

1 1

24 Shaft , 12

Selectors

NOlWlNAL

WORKING WIDTH:

430

MM,ELECTRONIC

CONTROLLED

SHAFTS: 24 (2 FOR

LENO, 22

FOR PATTERN)

ELECTRONIC

CONTROLLED

WEFT COLOR

SELECTORS: 12

BEAT-UP: DRIVEN

BY SERVO MOTOR

WEFT INSERTION:

SINGLE RAPIER

DRIVEN BY SERVO

MOTOR

WEFT ROTARY

CUTTER

Working

17 CCI SAMPLE LOOM NO -

2 1

24 Shaft, 12

Selectors

NOlWlNAL

WORKING WIDTH:

430

MM,ELECTRONIC

CONTROLLED

SHAFTS: 24 (2 FOR

LENO, 22

FOR PATTERN)

ELECTRONIC

CONTROLLED

WEFT COLOR

SELECTORS: 12

BEAT-UP: DRIVEN

BY SERVO MOTOR

WEFT INSERTION:

SINGLE RAPIER

DRIVEN BY SERVO

MOTOR

WEFT ROTARY

CUTTER

Working

18 CCI

SAMPL

E

WARPI

NG

CCI SAMPLE WARPER-1 1 Working Width

:500MM

NOMINAL

WORKING WIDTH:

500 MM

WARP LENGTH: 3.6

METERS

Working

19 CCI SAMPLE WARPER-2 1 Working Width

:500MM

NOMINAL

WORKING WIDTH:

500 MM

WARP LENGTH: 3.6

METERS

Working

________________________________________________________________________________________________________

52

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

20

Sizing

SIZING BEAM TO BEAM

-1 1

BEN-SIZETEC SWA

TKD ZT8 BB Working

21 SIZING CREEL TO BEAM

-1 1

SIZETEC ZB16 SWA

TKD TKD CT4/4/4 BB Working

22 Yamada YAMADA SIZING 1 TYPE

:YS-20 1

Type : YS-6 20

Spindles,Steam Type Working

23 Delta DELTA MACHINE 1

MAKE :STAUBLI 1 STAUBLI DELTA 110 Working

24 Reed

Cleaning

REED CLEANER M/C 1

MAKE :SPALECK 1

Weaving Reed

Cleaning

Through Steam

+ Chemical

SPALECK REED

CLEANER Working

25

Material

Handlin

g

Rimtex Alluminium Trolley

Size :600 X 400 X 600 mm 15

Yarn

Movement M/s Rimtex Working

26

Rimtex Alluminium Trolley

IIIMENSION 1330

X730X910MM

40 Yarn

Movement M/s Rimtex Working

27

Rimtex Alluminium Trolley

SIZE 1600X1100X1150

MM WITH 125 MM

15 Yarn

Movement M/s Rimtex Working

28 Peg Trolley 116 M/s K.B Son &

Dharmshil Working

29

A FRAME TROLLEY

MODEL EMBEE 329

110 (ZMTR

ROLLER

FACE)

M/S EMBEE

CORPORATION

Working

30 HORSE ACK TROLLY 24 Working

31 U FRAME TROLLY 15 Working

32

EOT CRANE -1 FOR

SIZING MAKE : SAFEX

CAP :2.5 TONNE

1 2.5 Tonne Load SAFEX Working

33

EOT CRANE -1 FOR

SIZING MAKE : SAFEX

CAP :2.5 TONNE

1 2.5 Tonne Load SAFEX Working

34

EOT CRANE -1 FOR

YARNDYEING MAKE :

SAFEX CAP :2.5 TONNE

1 2.5 Tonne Load SAFEX Working

35

GENKINGER SINGLE

BEAM TROLLEY 1 EE-

KHUR-20/10

1 Weaving Beam

Lifting Purpose

GENKINGER-

HUBTEX

Working

36

GENKINGER TOP BEAM

TROLLEY 1 EE-KHUR-

20/80

1 Weaving Beam

Lifting Purpose

GENKINGER-

HUBTEX

Working

37 GENKINGER WARPY 1 1 Weaving Beam M/s Picanol Working

________________________________________________________________________________________________________

53

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

TROLLEY FOR

WEAVING MACHINE (

Delta )

Lifting Purpose

38

"GODREJ DIESEL

FORKLIFT TRUCK

MODEL GX

39

300 D" 1 3.0 Tonne Load GODREJ & BOYCE

MFC.CO.LTD

Working

40

GODREJ POWER PALLET

TRUCK 1 MODEL WP

2320 CROWN

1 GODREJ & BOYCE

MFC.CO.LTD

Working

41

GODREJ POWER PALLET

TRUCK 2 MODEL WP

2320 CROWN

1 GODREJ & BOYCE

MFC.CO.LTD

Working

42

GODREJ POWER PALLET

TRUCK 3 MODEL WP

2320 CROWN

1 GODREJ & BOYCE

MFC.CO.LTD

Working

43

GODREJ HYDRAULIC

HAND PALLET TRUCK,

MODEL CROWN PTH 20-

45

6 2300 kg GODREJ & BOYCE

MFC.CO.LTD

Working

44

GODREJ HYDRAULIC

HAND PALLET TRUCK,

MODEL CROWN PTH 20-

45

2 2300 kg GODREJ & BOYCE

MFC.CO.LTD

Working

45

HAND PALLET TRUCK

CROWN GODREJ MAKE

CAPACITY 2.3 TON

MODEL PTH 27-45

4 2300kg GODREJ & BOYCE

MFC.CO.LTD

Working

46

GENKINGER

HYDRAULIC LIFT

TROLLEY HR 25

4 Process

Department

GENKINGER-

HUBTEX

Working

47

Hydraulic Lifter for Batch 6 1.5 Tonne Skega Engineering Co

Pvt Ltd

Working

48

GENKINGER PC-WARP

BEAM LOW LIFTTRUCK

TYPE :KGH 20/13

1 GENKINGER-

HUBTEX

Working

49

GENKINGER FABRIC

LIFT TRUCK WB 3/6 FOR

WEAVING

2 GENKINGER-

HUBTEX

Working

________________________________________________________________________________________________________

54

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

50

GENKINGER EMPTY

BEAM TRUCK LTW5S

FOR WEAVING

1 GENKINGER-

HUBTEX

Working

51

Grey Inspection Automatic

Lifting Trolley

3 M/s Anetex

52

GENKINGER A-FRAME

LIFTER CUM PULLAR

EGS-40

1 A-Frame

Lifting Trolley

For Process

GENKINGER-

HUBTEX

Working

53

Weaver's Beam Hand Pallet

Trolley

1 Skega Engineering Co

Pvt Ltd

Working

54 Sizing

Kitchen

SIZE KITCHEN M/s

K.B.Son 1

Size

Preparation

Cooker +

Transfer Pump

K.B. Son Working

55

Weaving

Machina

ries

Picanol Rapier ( Optimax

Machines ) 70

11000 Mtr /

Day , 92 Picks

per inch

M/s Picanol , Rapier

190CM Machine Working

56 Picanol Airjet ( Omni Plus

800 ) 60

17000 Mtr /

Day , 80 Picks

per Inch

M/s Picanol , Airjet

190CM Omni Plus 800

Machine,OmniplusS0O

-2-p - 190 (18 Nos.)

Omniplus8OO - 4 - p -

190 (30 Nos.)

OlUiplus800 - 6 - p -

190 (12 Nos.)

Working

57

Travelli

ng

Cleaner

for

Weaving

ELECTRO JET 1 MODEL

:LT2 SR :T-2845 1

M/S ELECTRO JET,

Model :LT2

Working

58 ELECTRO JET 2 MODEL

:LT2 SR :T-2846 1 Working

59 ELECTRO JET 3 MODEL

:LT2 SR :T-2844 1 Working

60 ELECTRO JET 4 MODEL

:LT2 SR :T-2835 1 Working

61 ELECTRO JET 5 MODEL

:LT2 SR :T-2843 1 Working

62 ELECTRO JET 6 MODEL

:LT2 SR :T-2836 1 Working

63 ELECTRO JET 7 MODEL

:LT2 SR :T-3120 1 Working

64 ELECTRO JET 8 MODEL

:LT2 SR :T-2839 1 Working

65 ELECTRO JET 9 MODEL

:LT2 SR :T-2840 1 Working

66 ELECTRO JET 10 MODEL

:LT2 SR :T-2842 1 Working

67 ELECTRO JET 11 MODEL 1 Working

________________________________________________________________________________________________________

55

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

:LT2 SR :T-2837

68 ELECTRO JET 12 MODEL

:LT2 SR :T-2838 1 Working

69 ELECTRO JET 13 MODEL

:LT2 SR :T-2841 1 Working

70 Name

Writer

Name Writer Attachment (

Selvedge Writter ) 24

For Selvedge

Write up

M/s SNS ( Perfect

Scale , Bhilwara ) Working

71

Spool

Winder

Spool Winder for Selvedge 1 Spool

Preparation for

Selvedge

Prashant GammaTex ,

Ahmedabad

Working

72

Yarn

Dyeing

Eco-bloc Quattro Type

2/229/2 2 2 kgs each Coupling Option Working

73 Eco-bloc Quattro Type

4/229/3 4 3 kgs each

Coupling option in all

permutation &

combination

Working

74 Eco-bloc Quattro Type

4/229/6 4 6 kgs each

Coupling option in all

permutation &

combination

Working

75 Eco-bloc X Yarn dyeing m/c

Type 800KB ( 106 Kg ) 2 140kgs

Vertical High

temperature high

pressure package

dyeing.

Working

76 Eco-bloc X Yarn dyeing m/c

Type 650KB ( 57 Kg ) 1 70kgs Working

77 Eco-bloc X Yarn dyeing m/c

Type 1350LB (600 Kg ) 1 700kg Working

78 Eco-bloc X Yarn dyeing m/c

Type 1350KB ( 300 Kg ) 1 400kg Working

79 Pressure Dryer " RIII " 1350

KB ( 300 KG ) 1

500 kg per

batch

Pressure Dryer/Rapid

Dryer Working

80 Chemical Supply System

MPS-L 1

10 overhead

tanks

For liquid chemicals

only Working

81 Dyestuff desolving system

MPS-D -300 Ltr 1 300litres

Automatic Chemical

Transfer to Machine as

per Programming in

Orgatex

Working

82 Dyestuff desolving system

MPS-D -600 Ltr 1 600litres Working

83 Orga Tex Overhead System

for T 858 1

Orgatex

Computer

Server + Client

Automatic

Programming of All

Dyeing Machines as

per programme

Working

84 Heat Recovery Plant Type

150 1

Heat Recovery

System Working

85 Yarn

Dyeing

Lab

Equipm

ent

ELECTRO-HYDRAULIC

LIFT 1 2.5 Tonne

Make :TRUCK MAN

Hydraulic Lift for

Loading & unloading

Chemical & Material

Working

86 MATHIS SOAPY 1 MATHIS Working

87 MATHIS LABOMAT 2

12 Beakers

each with hank

quantity of

30gms.

RF Drying Beaker

dyeing machine. Working

________________________________________________________________________________________________________

56

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

88 WRAP REEL 1 TEX LAB Working

89 WRAP REEL 1 INNOLAB India

90 DATACOLOR AUTO LAB

SPS 1

Gravimetric laboratory

dispenser (Datacolor) Working

91 Automatic Solution Maker

(Datacolor) 1 Autolab SPS Working

92 Computer Color Matching

(Datacolor) 1 DATACOLOUR Working

93 SPECTRA LIGHT BOX 2

SPECTRA LIGHT

BOX CHECKING OF

COLOUR SHED

Working

94

SHADE CARD

PREPARATION

MACHINE

1 M/s Mesdan Working

95 LAB FASTNESS TESTER 1 M/s Mesdan Working

96 HOT AIR OVEN 1 Eie Instruments Working

97 HANK TO CONE PS M/C. 1 3 Spindle PS IND. Working

98 Singeing

SENGE-DESIGE

MACHINE (SINGEING

AND PREPRATORY

LINES OSTHOFF SENGE

SYSTEM )

1 3400MM OSTHOFF Working

99 PTR

Machine

PRE-TREATMENT

RANGE ( PTR-I & II ) (

BENNINGER OPEN

WDTH CONTINOUS

SCOURING AND

BLEACHING RANGE M/C

PRE-TREATMENT

RANGE(PTR) ( machine no

TA301972) )

1 3400MM/3200

MM BENNINGER Working

100 VDR

VDR FOR OPEN WIDTH

CONTINOUS SCOURING

AND BLEACHING

RANGE (18+2 WW3200

MM)

1 (18+2 WW3200

MM) KUSTER CALICO Working

101 Merceris

er

MERCERISER

(BENNINGER FABRIC

MERCERIZING

MACHINE WITHOUT

CAUSTIC RECOVERY

UNIT TYPE MS5-1E-LG

EXTRACTA-(ZT)-3200(

machine no TA301974) )

1 3200MM BENNINGER Working

102 VDR

VDR FOR FABRIC

MERCERISING (20+2 WW

3200 MM)

1 (20+2 WW

3200 MM) KUSTER CALICO Working

103 PAD PADDRY - Thermosol 1 1800MM MONFORT'S Working

________________________________________________________________________________________________________

57

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

Dry

104 PAD

STEAM PAD STEAM 1 1800MM BENNINGER Working

105 VDR

VDR FOR FABRIC FOR

PAD STEAM (16+2 WW

1800 MM)

1 (16+2 WW

1800 MM) KUSTER CALICO Working

106 CPB

COLD PAD BATCH

MACHINE ( BENNINGER

COLD PAD BATCH TYPE

222-12-1800 (CPB) )

1 1800MM BENNINGER Working

107 VDR

VDR FOR OPEN WIDTH

CONTINOUS SCOURING

AND BLEACHING

RANGE (18+2 WW3200

MM)

1 (18+2 WW3200

MM) KUSTER CALICO Working

108 Stenter -

8

STENTER (8 CH)-CURING

(MONFORTS MAKE

STENTER FRAME RANG

MONTEX 6500- 8F- 200

CM )

1 1800MM MONFORT'S Working

109 Stenter -

6

STENTER(6 CH) (

MONFORTS MAKE

STENTER FRAME RANG

MONTEX 6500- 6F- 200

CM )

1 1800MM MONFORT'S Working

110 Shrinka

ge

MONFORTS MAKE

SHRINKAGE RANGE 200

CM ( monfortex sanforizer)

71-T-75004

1 1800MM MONFIRT'S Working

111 VDR

VDR FOR FABRIC

MERCERISING (20+2 WW

3200 MM)

1 (20+2 WW

3200 MM) KUSTER CALICO Working

112

Calende

r

CALENDER MACHINE (

HYCON-L CALANDER

423.55 X 3600 MM RW

INCLUDING

ACCESSORIES )

1 3400MM ANDTRIZ KUSTER'S Working

113 CRP CAUSTIC RECOVERY

PLANT 1

4 Stage Caustic

Soda Recovery

System for

14000 Ltrs /

Hrs Capacity

alongwith spare

parts for 2-year

operation

Korting Hannover AG Working

114 Batch

Rotation

Rotating Station 1 ( 12

Station ) 1 Kuster Working

115 Rotating Station 2 ( 6

Station ) 1 Kuster Working

________________________________________________________________________________________________________

58

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

116

SS Tank

for

Process

SS TANK 2000 LTR

CAPACITY 2

Chemical

Mixing &

Storage

Working

118 SS TANK 1000 LTR

CAPACITY 11

Chemical

Mixing &

Storage

Working

119 SS TANK 500 LTR

CAPACITY 8

Chemical

Mixing &

Storage

Working

120 SS TANK 250 LTR

CAPACITY 3

Chemical

Mixing &

Storage

Working

121 SS MOBILE TANK 1000

LTR CAPACITY 5

Chemical

Mixing &

Storage

Working

122 SS MOBILE TANK 500

LTR CAPACITY 5

Chemical

Mixing &

Storage

Working

123 MS

Tank

MS TANK 20000 LTRS

CAPACITY FOR

CAUSTIC RECOVERY

PLANT

6

Chemical

Mixing &

Storage

Working

124

Processi

ng Lab

Equipm

ent

MATHIS DRYER 1 MATHIS Working

125 MATHIS PADDER 1 MATHIS Working

126 RBE Padding Mangle 1 R B Electronic &

Engineering Pvt Ltd Working

127 MATHIS E-CONTROL 1 MATHIS Working

128 MATHIS PAD STEAMER 1 MATHIS Working

129 MATHIS WASHER 1 MATHIS Working

130 Data colour Auto lab sps

mixer station 1 DATACOLOUR Working

131 Data colour Auto lab

solution maker 1 DATACOLOUR Working

132 data colour autolab TF 80

dispenser 1 DATACOLOUR Working

133 PHOTO SPETRO METER -

600TM 1 DATACOLOUR Working

134

MACBETH SPECTRA

LIGHT BOX model-

SPL111 W-1500

1 SPECTRA Working

135

MICROWAVE OVEN W-

1350 MODEL-MC8087

ABR & MC3283 FMPG

2 LG Working

136

QA Lab

Equipm

ent

ELEWRAP- 10 MODEL -

NO MAG Y0151 1 MAG SOLVICS Working

137 AUTO WINDER Model-

MAG Y0821 1 MAG SOLVICS Working

138 MECTEAR ( FABRIC

TEAR TESTER ) Model- 1 MAG SOLVICS Working

________________________________________________________________________________________________________

59

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

MAG C0801

139

Circular specimen cutter

capacity -dia 112,80 mm

model -MAG C0101 (

GSM Cutter )

1 MAG SOLVICS Working

140

WEIGHING SCALE -220G

MAX, MODEL-

ML204/A01 TYPE-NEW

CLASSIC MF

1 METTLER TOLEDO Working

141

NU MARTINDALE

ABRASION &PILLING

TESTER MODEL- 864

NU MARTINDALE

1 JAMES H. HEAL Working

142

TITAN 3 UNIVERSAL

STRENGTH TESTER

MODEL -910 TITAN

1 JAMES H. HEAL Working

143 PILLIS COPE MODEL-

PILLIS COPE 1 VERIVIDE Working

144

PNEUMASTIFF MODEL-

M09C11031 CAPACITY -

30KG

1 MAG SOLVICS Working

145

ATTRIFIL FRICTION

TESTER MODEL-

ATTRIFIL TYPE-223B

1 MESDAN (ITALY) Working

146

COMPUTWIST MODEL-

MAG Y0762 CAPACITY-

20 INCH

1 MAG SOLVICS Working

147

USHA JANCME

STITCHING MACHINE

MODEL- STITCH MAGIC

2 USHA Working

148

UNISTRETCH 250

MODEL-MAG G0101

CAPACITY-250 KG

1 MAG SOLVICS Working

149

ROTARY IRON MODEL-

B990 ART.NO-13099026

GB , M.NO-7222710

1 MIELE Working

150

HUMIDIFIRE MODEL-

M25KA001VBG00 20M

X12L O7601

1 EMERSION Working

151 VERIVIDE LIGHT BOX

MODEL- ATCC24 1 VERIVIDE Working

152 HYGRO- THERMO

GRAPH MODEL-ST50 1 SEKONIC Working

153 CREASE RECOVERS

ANGLE TESTER 1 JAMES H. HEAL Working

154 SMART PUB XT MODEL-

MAG C0252 1 MAG SOLVICS Working

155 CROCK MASTER (

COLOUR FASTNESS TO 1 JAMES H. HEAL Working

________________________________________________________________________________________________________

60

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

RUBBING) MODEL-

MOTOR DRIVEN CROCK

MASTER

156 CARBOLITE OVEN

TYPE-HX30 1 JAMES H. HEAL Working

157 CARBOLITE OVEN

TYPE-PF60 1 CARBOLITE Working

158 PH TESTER MODEL-

CPM-280 1 ENDRESS + HAUSER Not Working

159

PRESOHOT SH ( HOT

PLATE) MODEL-MAG

C2101 CAPACITY -

160X125 MM

1 MAG SOLVICS Working

160 SEDKO (HOT PLATE) 1 SEDKO Working

161

PRECISA XB 320M (

WEIGHING SCALE)

MODEL-MAG BA019A

CAPAITY-320 GMS

1 PRECISA Working

162

PARAMOUNT SPRAY

TESTER (S.S) SPECIMEN

TEMPLATE SIZE-18 CMS

X 18CMS

1 PARAMOUNT Working

163 WASHING MACHINES

MODEL-W10095570 1 WHIRLPOOL (USA) Working

164 AIR DRYER MODEL-

W10095950 1 WHIRLPOOL (USA) Working

165

WASHING MACHINES (-

WHITE MAGIC PROXL

800H ) MODEL-11585

1 WHIRLPOOL Not Working

166 WASHING MACHINES

360 Blow Wash 1 WHIRLPOOL Working

167 Washing Machines Ultra 6

Sense 1 WHIRLPOOL Working

168

GYROWASH (WASHING

DRY CLEANING

COLOUR FASTNESS

TESTER)

1 JAMES H. HEAL Working

169 WASCATOR MODEL-

FOM71C15 1

JAMES H. HEAL

(ELECTOROLUX) Not Working

170

ACCUDRY

STANDARDISEAL

TUMBLE DRYER

1 JAMES H. HEAL Working

171 Revo Overlock Machine 2 Revo

One Working

& 1 Only

Head

172 Hardness Tester HP 5 1 Working

173 Moisture Meter 2 Digi Moist One Working

174 KNITTING MACHINE 1 BHARAT Working

175 KNITTING MACHINE 1 MESDAN (ITALY) Working

________________________________________________________________________________________________________

61

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

TYPE-294 E

176

Greige

Inspecti

on

Machine

GREIGE INSPECTION

MACHINE NO 1 MAKE

:YASH

1 2500 Mtr / Shift

YASH TEXTILE

MACHINES PVT

LTD

Working

177

GREIGE INSPECTION

MACHINE NO 2 MAKE

:YASH

1 2500 Mtr / Shift Working

178

GREIGE INSPECTION

MACHINE NO 3 MAKE

:YASH

1 2500 Mtr / Shift Working

179

GREIGE INSPECTION

MACHINE NO 4 MAKE

:YASH

1 2500 Mtr / Shift Working

180

GREIGE INSPECTION

MACHINE NO 5 MAKE

:YASH

1 2500 Mtr / Shift Working

181

GREIGE INSPECTION

MACHINE NO 6 MAKE

:YASH

1 2500 Mtr / Shift Working

182 Greige

Batching

GREIGE PREPARATORY

LINE M/C TYPE NDR

JSCRAY-SWBB MOD

PREMIER

1 Working

183

Finish

Inspecti

on

Machine

FINISH INSPECTION

MACHINE NO 1 MAKE

:YASH

1 2000 Mtr / Shift Working

184

FINISH INSPECTION

MACHINE NO 2 MAKE

:YASH

1 2000 Mtr / Shift Working

185

FINISH INSPECTION

MACHINE NO 3 MAKE

:YASH

1 2000 Mtr / Shift Working

186

FINISH INSPECTION

MACHINE NO 4 MAKE

:YASH

1 2000 Mtr / Shift Working

187

FINISH INSPECTION

MACHINE NO 5 MAKE

:YASH

1 2000 Mtr / Shift Working

188

FINISH INSPECTION

MACHINE NO 6 MAKE

:YASH

1 2000 Mtr / Shift Working

189

FINISH INSPECTION

MACHINE NO 7 MAKE

:YASH

1 2000 Mtr / Shift Working

190

LOGISTIC SET UP FOR

PACKING M/C TYPE

STD, MODEL

EURO,MAKE : YASH

1 Working

191 FABRIC PACKING M/C 1 500 Roll Per Working

________________________________________________________________________________________________________

62

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

TYPE EUROPACK,

MODEL L/30/180 MAKE

:YASH

day

192

Batch to

Batch &

Batch to

Roll

Machine

Yash Batch to Batch &

Batch to Roll Machine 1 Working

193 Spool

Winder Spool Winder for Selvedge 1

Spool

Preparation for

Selvedge

Prashant GammaTex,

Ahmedabad Working

194

HMI

Panel

for Grey

& Finish

Inspecti

on

Panel for Grey Inspection

Machines Incl. 1 Database (

HMI )

4

Communication

with Finish

Inspection data

With Server &

Mention Report

of Each Defect

Maag Brother

Not Working

195

Panel for Finish Inspection

Machines Incl. 1 Database (

HMI ) + 5 Label Printer

5 Not Working

196

Almac &

Polytex

OTC

Machine

ries

ALMAC FABRIC

DOUBLING & LAPPING

MACHINE 1 MODEL

:DFLM-02

1

YASH TEXTILE

MACHINES PVT

LTD

Working

197 AlMAC Layer & Cutting

Machine 1

ALMAC POLYTEX

INDIA Not Use

198

MULTIPLE STAPLING

MACHINE MAKE

:ALMAC POLYTEX TYPE

SE

1 ALMAC POLYTEX

INDIA Working

199

FABRIC DRILLING

MACHINE MAKE

:ALMAC POLYTEX TYPE

BO

1 ALMAC POLYTEX

INDIA Working

200 POLYTEX GLUEING

MACHINE TYPE CP 1 POLYTEX AG Working

201

WATERFALL MACHINE

MAKE :POLYTEX TYPE

FB

1 POLYTEX AG Working

202

SAMPLE PINKING

MACHINE MAKE:

POLYTEX TYPE ZE-V

1 POLYTEX AG Working

203

Staubli Top Matic 4 Pattern

Knotting

Machine

M/s Staubli , India Working

204 Compre

ssor

ATLAS COPCO ZR-900

VSD COMPRESSOR With

Dryer

1 5200 CFM ATLAS COPCO Working

205 Chicago Air Compressor

with Receiver 1 400 CFM Chicago Working

206 Luwa

Humidif

COOLING TOWER

ATLAS COMPRESSOR 2 Advance Working

________________________________________________________________________________________________________

63

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

207 ication

Plant

WEAVING -I H-PLANT

OF LUWA 1

10440 M3

Volume LUWA Working

208 WEAVING -II H-PLANT

OF LUWA 1

8443 M3

Volume LUWA Working

209 WEAVING -III H-PLANT

OF LUWA 1

10440 M3

Volume LUWA

Not

Commission

210 WARPING H-PLANT OF

LUWA 1

17820 M3

Volume LUWA Working

211 WINDING H-PLANT OF

LUWA 1

5333 M3

Volume LUWA Working

212

Therma

x Boiler

BOILER

THERMAX MODEL:SM1

20DH/10.54/2,FO/NGAS

FIRE

1

12 Tonne

THERMAX -SHELL

MAX Working

213

OILON BURNER

TYPE:GRP-800ME,200-

800KG/H,CAP:2.2-9.0MW

1 OILON Working

214

Air

Handlin

g

ADVANCE MAKE

COOLING UNIT --Process 1 25 TR

WC-75000-22-T-

DCPHE-AC-CSS-MT3 Working

215

Air

Handlin

g

ADVANCE MAKE

COOLING UNIT----Process 1 10 TR

WC-30000-22-T-

CITSS-AC-CSS-T3 Working

216

Air

Handlin

g

ADVANCE MAKE

COOLING UNIT----Yarn

dyeing

1 10 TR WC-30000-22-T-

CITSS-AC-CSS-T3-R1 Working

217

ETP ,

RO &

RO,

STP,

Therma

x make

HBD SYSTEM 1

HYDRO 1V

_3P_1PT_11KW_SD

with VFD

Working

218

ETP ,

RO &

RO,

STP,

Therma

x make

HBD SYSTEM 1

Supply of

Water through

Pressure

Boosting Panel

( 2 W + 1 S )

HYDRO 2W + 1S NB

PUMPS with VFD

Panel ( M/s Jaypump )

Working

219

ETP ,

RO &

RO,

STP,

Therma

x make

HBD SYSTEM 1

Grundfos

Pressure

Boosting

system supply

water 45 m3 /

hr

HYDRO BPVS 3 X

7.5KW with VFD

Panel ( M/s Harsh

Engineering )

Working

220 D.G. Set D.G Set For Plant Lighting ( 1 250 KVA Cater Piller ( Kirloskar Working

________________________________________________________________________________________________________

64

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

DIESEL GENERATING

SET 250 KVA, CATER

PILLAR, 1500 RPM, NON

M )

)

221

Fire

Hydrant

System

D.G SET for Fire Hydrant

System 1 100 KVA

1 )KIRLOSKAR OIL

ENGINE TYPE

:6R1080,RATING

:KW/HP 82,RPM

:1800,RATING STD -

130 3046,ENGINE

NO:6H.210.4.22/09000

02. 2)RADIATOR

MAKE :BANCO

PRODUCTS,MODEL

:6RT/100KVA,PART

NO:6H.056.100.00,SR

NO:2009 08 21

Working

222 MOTOR FIRE SYSTEM 1

CROMPTON MAKE

3-PHASE

INDUCTION MOTOR

M/C NO:NADT

126,KW:55,RPM

:2955,AMP:88A,REF

:IAAN722474

Working

223

Utility

FIRE ALARM SYSTEM

OF SYSTEMTEK 1

Fire Alarm

System to Alert

any Fire in

Admin block

SYSTEMTEK Working

224 COMPRESSOR COOLING

PUMP - 2 1

KSB PUMP MEGA 80

– 315 Working

225 COMPRESSOR COOLING

PUMP - 3 1

KSB PUMP MEGA 80

– 315 Working

226 COMPRESSOR COOLING

PUMP - 4 1

KSB PUMP MEGA 80

– 315 Working

227 COMPRESSOR COOLING

PUMP MOTOR - 1 1

ABB MOTOR 3Ø

SQUIRREL CAGE

INDUCTION MOTOR

TYPE :- HX

+180MLB4

Working

228 COMPRESSOR COOLING

PUMP MOTOR - 2 1

ABB MOTOR 3Ø

SQUIRREL CAGE

INDUCTION MOTOR

TYPE :- HX

+180MLB5

Working

229 COMPRESSOR COOLING

PUMP MOTOR - 3 1

ABB MOTOR 3Ø

SQUIRREL CAGE

INDUCTION MOTOR

TYPE :- HX

+180MLB6

Working

230 COMPRESSOR COOLING 1 ABB MOTOR 3Ø Working

________________________________________________________________________________________________________

65

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

PUMP MOTOR - 4 SQUIRREL CAGE

INDUCTION MOTOR

TYPE :- HX

+180MLB7

231

ETP ,

RO &

RO,

STP,

Therma

x make

ETP Equipment & System (

2MLD CAPACITY ETP

PLANT )

1

Set

Complete Pump

with Motor &

other Asseroies

Supply M/s

Thermax

M/s Thermax Working

232

ETP Softening & Dual

Media Filter+ RO Permeate

+ RO Reject Pump System

Complete & Evaporate

System ( RO PLANT

2MLD CAPCACITY

THERMAX )

1

Set

Softening Plant

125 M3/ Hr

Qty=2,Raw

Water Pump

125 M3/hr

Qty=3, Dual

Media Filter

125M3/hr

Qty=2 & RO

Permeate

transfer &

Softening

M/s Thermax Working

233

STP Plant ( SEWAGE

TRATMENT PLANT (STP)

THERMAX CAP 35

M3/DAY )

1

Set

Cap 35 M3 /

day M/s Thermax Working

234 BOD incubetor 1 For Analysis Working

235 Furnace 1 For Analysis Working

236 Oven 1 For Analysis Working

237 COD Digester 1 For Analysis Working

238 DO Meter 1 For Analysis Working

239 Turbidity Meter 1 For Analysis Working

240 PH Meter 1 For Analysis Working

241 Weighing Balance 1 For Analysis Working

242

Stitching

and

Sewing

M/c

"REVO"MAKE 81-24Z

SINGLE NEEDLE SINGLE

THREAD

HIGH SPEED SELF

LUBRICATED MACHINE

FOR PIECE

END JOINING WITH 1/2

HP MOTOR & ALL

ACCESSR

1

243

CLOTH STICHING

MACHINE REVO MAKE

MODEL 81-24Z

1

244

CLOTH STICHING

MACHINE REVO MAKE

MODEL 81-24Z

5

245 CLOTH STICHING 2

________________________________________________________________________________________________________

66

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

MACHINE REVO MAKE

MODEL 81-24Z

246

CLOTH STICHING

MACHINE REVO MAKE

MODEL 81-24Z

5

247

CLOTH STICHING

MACHINE REVO MAKE

MODEL 81-24Z

3

248

CHAIN SEWING

MACHINE REVO C-89-

1/DA HEAVY DUTY

SINGLE NEEDLE

1

249

HANGING CHAIN STICH

SEWING MC MAKE

OLIVIA NO 3840

1

250

HEAD FOR STICHING

MACHINE REVO MODEL

81-24Z

3

251

SINGLE THREAD

ABUTTED SEAM

SEWING MACHINE,

MODEL NO. IDL 302

1

252

OVERLOCK SEWING

MACHINE REVO 81-3

HEAD ONLY

1

253

OVERLOCK SEWING

MACHINE WITH

ACCESSORIES REVO

MAKE MODEL81-3

1

254

SEWING MACHINE

USHA MAKE LOCK

STITCHING MC MODEL

8500

1

255

CHAIN SEWING

MACHINE REVO C-89-

1/DAD HEAVY DUTY

DOUBLE NEEDL

2

Non Measurable items

256 Gujarat Gas Pipe Line

Installation 1

Gas Pipe Line

Installation for

Supply of NG

Gujarat Gas Working

257 Gujarat Gas Skid 1

6Inch X 6 inch

Gas Filteration

& Pressure

Reducing Skid

As Gujarat Gas

Design

Nirmal Industrial

Control Pvt. Ltd Working

258

Charges for Piping,

Insulation and Ducting,

Fabrication, Pumps, some

________________________________________________________________________________________________________

67

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

lab equipments, Electricity

connection from GEB,

Water softining plant,

Drilling and cutting machine

etc.

Electrical installation

259

HT

Panel

HT PANEL MAKE

:AREVA 11KV Breaker AREVA Working

260 HT PANEL-1 MOTOR

FEEDER 935KW 1 11KV Breaker AREVA Working

261 HT PANEL-2 MOTOR

FEEDER 800KW 1 11KV Breaker AREVA Working

262 HT PANEL-3 O/G TRFO

FEEDER-1, 2500KVA 1 11KV Breaker AREVA Working

263 HT PANEL-4 GEN.

INCOMER -1 1 11KV Breaker AREVA Working

264 HT PANEL-5 O/G TRFO

FEEDER-2, 2500KVA 1 11KV Breaker AREVA Working

265

HT PANEL-6 AUXILARY

TRANSFORMER O/G

FEEDER -1250KVA

1 11KV Breaker AREVA Working

266 HT PANEL-7 BUS PT -1 1 11KV Breaker AREVA Working

267 HT PANEL-8 O/G TRFO

FEEDER-3, 2500KVA 1 11KV Breaker AREVA Working

268 HT PANEL-9

BUSCOUPER 1 11KV Breaker AREVA Working

269 HT PANEL-10 BUS PT -2 1 11KV Breaker AREVA Working

270 HT PANEL-11 O/G TRFO

FEEDER-4, 2500KVA 1 11KV Breaker AREVA Working

271 HT PANEL-12 O/G TRFO

FEEDER-5, 2500KVA 1 11KV Breaker AREVA Working

272 HT PANEL-13 GAS

ENGINE I/C 1 11KV Breaker AREVA Working

273 HT PANEL-14 O/G TRFO

FEEDER-6, 2500KVA 1 11KV Breaker AREVA Working

274 HT PANEL-15 MOTER

FEEDER 800KW (B) 1 11KV Breaker AREVA Working

275 HT PANEL-16 SPARE

BUS COUPLER 1 11KV Breaker AREVA Working

276 Battery

Bank

Battery Bank of Source 110

VDC Make : Amaraja 1 Make : Amaraja Working

277 LT

Panel

LT PANEL MAKE

:HORIZON 1

11kv / 433 LT

Breaker ( 4000

A - 2 Nos +

2000 A -13 Nos

) ACB

HORIZON

MICROTECH PVT

LTD

Working

278

LT

Panel

Breaker

ACB 3WL 4000A Siemens 5

3WL 4000A 4P

ED0 Size-2,

ACB,

M/S SIEMENS

LIMITED

Not

Commissioned

________________________________________________________________________________________________________

68

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

s Icc=80KA,

Protection

Release -

without release,

Motor &

closing coil

rated at

230V AC,

Shunt release

rated at 24V

DC,

Accessories -

Safety Shutter,

2N0+2NC Aux

contact, Door

Sealing

Frame, Release

Cover only

279 ACB 3WL 2000A Siemens 7

3WL 2000A 3P

MDO ACB,

lcs=lcu=IOOK

A, lew for lsec

= 80KA

Protection

Release -

E'rU27B(LSIN

G), Shunt

release rated at

24V DC,

Accessories -

Safety Shutter,

2NO+2NC

M/S SIEMENS

LIMITED

Not

Commissioned

280

Transfor

mers

TRANSFORMER NO:1 -

11KV/433V,2500KVA,SRN

O-D7797

1 25000KVA,11/

0.433 kV AREVA Working

281

TRANSFORMER NO:2 -

11KV/433V,2500KVA,SRN

O-D7796

1 25000KVA,11/

0.433 kV AREVA Working

282

TRANSFORMER NO:3 -

11KV/433V,2500KVA,SRN

O-D7795

1 25000KVA,11/

0.433 kV AREVA

Not

Commissioned

283

TRANSFORMER NO:4 -

11KV/433V,2500KVA,SRN

O-D7794

1 25000KVA,11/

0.433 kV AREVA

Not

Commissioned

284

TRANSFORMER NO:5 -

11KV/433V,2500KVA,SRN

O-D7793

1 25000KVA,11/

0.433 kV AREVA

Not

Commissioned

285

TRANSFORMER NO:6 -

11KV/433V,1250KVA,SRN

O-D7825

1 1250KVA,11/0.

433 kV AREVA

Not

Commissioned

________________________________________________________________________________________________________

69

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

286

TRANSFORMER NO:7 -

11KV/506V,1250KVA,SR

NO:10210702506

1 1250KVA,11/0.

500 kV

PAVWELS - ATLAS

COPCO ( RECEIVED

WITH ZR-900

COMPRESSOR )

Working

287

APFC

Panel

APFC 550 KVAR PANEL

1 MAKE :NEPTUNE 1

550 kvr

capacitor bank

for

improvement of

power factore

NEPTUNE SYSTEMS

PVT LTD Working

288 APFC 550 KVAR PANEL

2 MAKE :NEPTUNE 1

550 kvr

capacitor bank

for

improvement of

power factore

NEPTUNE SYSTEMS

PVT LTD Working

289 APFC 550 KVAR PANEL

3 MAKE :NEPTUNE 1

550 kvr

capacitor bank

for

improvement of

power factore

NEPTUNE SYSTEMS

PVT LTD Working

290

Panel

STABILIZER NO :1

500KVA MAKE:SUVIK 1

Supplyitg

Constant

Voltage 380 V

A.C Output

SUVIK

ELECTRONICS PVT

LTD

Working

291 STABILIZER NO :2

500KVA MAKE:SUVIK 1

Supplyitg

Constant

Voltage 380 V

A.C Output

SUVIK

ELECTRONICS PVT

LTD

Working

292

STABILIZER NO :3

250KVA MAKE:SUVIK

VS 32250C

1

Supplyitg

Constant

Voltage 380 V

A.C Output

SUVIK

ELECTRONICS PVT

LTD

Working

293

STABILIZER NO :4

250KVA MAKE:SUVIK

VS 32250C

1

Supplyitg

Constant

Voltage 380 V

A.C Output

SUVIK

ELECTRONICS PVT

LTD

Working

294

PDB-2 FOR PROCESS

MACHINE MAKE

:HORIZON

1

HORIZON

MICROTECH PVT

LTD

295

PDB-4 FOR PROCESS

MACHINE MAKE

:HORIZON

1

HORIZON

MICROTECH PVT

LTD

296

PDB-6 FOR WEAVING

MACHINE MAKE

:HORIZON

1

HORIZON

MICROTECH PVT

LTD

297

PDB-7 FOR WARPING

MACHINE MAKE

:HORIZON

1

HORIZON

MICROTECH PVT

LTD

298

PDB-8 FOR WINDING

MACHINE MAKE

:HORIZON

1

HORIZON

MICROTECH PVT

LTD

________________________________________________________________________________________________________

70

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

299

PDB-9 FOR YARN

DYEING MAKE

:HORIZON

1

HORIZON

MICROTECH PVT

LTD

300 PDB-10 FOR ETP MAKE

:HORIZON 1

HORIZON

MICROTECH PVT

LTD

301 PDB-11 FOR POWER

PLANT MAKE :HORIZON 1

HORIZON

MICROTECH PVT

LTD

302

MLDB 1 FOR PLANT

LIGHTING MAKE

:COTMAC

1

Lighting

Distrubution

Main Panel in

LT Room

COTMAC

ELECTRONICS PVT

LTD

303

SLDB 1 FOR PROCESS

LIGHTING MAKE

:COTMAC

1 Process

Lighting

COTMAC

ELECTRONICS PVT

LTD

304

SLDB 2 FOR

COMPRESSOR MAKE

:COTMAC

1 Compressor

COTMAC

ELECTRONICS PVT

LTD

305 SLDB 3 MAKE :COTMAC 1 Admin Block

COTMAC

ELECTRONICS PVT

LTD

306

SLDB 4 FOR PROCESS

LIGHTING MAKE

:COTMAC

1 Process

Lighting

COTMAC

ELECTRONICS PVT

LTD

307

SLDB 5 FOR

PREPARATORY MAKE

:COTMAC

1 Winding

Lighting Supply

COTMAC

ELECTRONICS PVT

LTD

308 SLDB 6 FOR PROCESS

MAKE :COTMAC 1

Process

Lighting

COTMAC

ELECTRONICS PVT

LTD

309

SFU 800A PANEL FOR

ZR900 COMPRESSOR

MAKE : COTMAC

1

SFU Switch for

Supply Power

to Compressore

COTMAC

ELECTRONICS PVT

LTD

310

MCC PANEL FOR

COMPRESSOR UTILITY

MAKE :COTMAC

1

MCC Panel for

Supply for

Utilities Pump

COTMAC

ELECTRONICS PVT

LTD

311

LDB 1 PANEL FOR

WEAVING MACHINE

MAKE :COTMAC

1

Weaving

Machinaries

MCB Panel

COTMAC

ELECTRONICS PVT

LTD

312

LDB 2 PANEL FOR

WEAVING MACHINE

MAKE :COTMAC

1

Weaving

Machinaries

MCB Panel

COTMAC

ELECTRONICS PVT

LTD

313

LDB 3 PANEL FOR

WEAVING MACHINE

MAKE :COTMAC

1

Weaving

Machinaries

MCB Panel

COTMAC

ELECTRONICS PVT

LTD

314

LDB 4 PANEL FOR

WEAVING MACHINE

MAKE :COTMAC

1

Weaving

Machinaries

MCB Panel

COTMAC

ELECTRONICS PVT

LTD

________________________________________________________________________________________________________

71

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

315

LDB 5 PANEL FOR

WEAVING MACHINE

MAKE :COTMAC

1

Weaving

Machinaries

MCB Panel

COTMAC

ELECTRONICS PVT

LTD

316

LDB 6 PANEL FOR

WEAVING MACHINE

MAKE:COTMAC

1

Weaving

Machinaries

MCB Panel

COTMAC

ELECTRONICS PVT

LTD

317

LDB 7 PANEL FOR

WEAVING MACHINE

MAKE:COTMAC

1

Weaving

Machinaries

MCB Panel

COTMAC

ELECTRONICS PVT

LTD

318

LDB 8 PANEL FOR

WEAVING MACHINE

MAKE :COTMAC

1

Weaving

Overhead MCB

Panel

COTMAC

ELECTRONICS PVT

LTD

319 ETP MCC PANEL MAKE

:THERMAX 1

M/s Thermax

Supply MCC

Panel for

Supplying

power to ETP

Utilities

DIVISION SWITCH

GEAR & CONTROL

PRIVATE LIMITED

Supplied by M/s

Thermax

320

TFO&ASMB MCC-

WINDING MACHINE

SUPPLY

1

Winding

Machines

Supply Panel

HORIZON

MICROTECH PVT

LTD

321 AIRJET MCC PANEL

MAKE :HORIZON 1

Weaving Panel

Room

HORIZON

MICROTECH PVT

LTD

322 HUMIDIFICATION MCC

MAKE :HORIZON 1

Weaving H

Plant

HORIZON

MICROTECH PVT

LTD

323 O/H CLEANER MCC

MAKE:HORIZON 1

Weaving Panel

Room

HORIZON

MICROTECH PVT

LTD

324 BOILER MCC MAKE

:HORIZON 1

HORIZON

MICROTECH PVT

LTD

325 O/H CLEANER MCC

MAKE:HORIZON 1

HORIZON

MICROTECH PVT

LTD

326 CRP MCC MAKE

:HORIZON 1

HORIZON

MICROTECH PVT

LTD

327 PLATING MACHINE

MCC MAKE:HORIZON 1

HORIZON

MICROTECH PVT

LTD

328 FINAL TEST LAB MCC

MAKE :HORIZON 1

HORIZON

MICROTECH PVT

LTD

329 AUTO QUATRO MCC

MAKE :HORIZON 1

HORIZON

MICROTECH PVT

LTD

330 INSPECTION MACHINE 1 1 HORIZON

________________________________________________________________________________________________________

72

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

MCC MAKE :HORIZON MICROTECH PVT

LTD

331 TFO&ASMB MCC MAKE

:HORIZON 1

HORIZON

MICROTECH PVT

LTD

332 INSPECTION MACHINE 2

MCC MAKE :HORIZON 1

HORIZON

MICROTECH PVT

LTD

333 INSPECTION MACHINE 3

MCC MAKE :HORIZON 1

HORIZON

MICROTECH PVT

LTD

334 SAMPLE WARPER MCC-

LT ROOM 1

HORIZON

MICROTECH PVT

LTD

335

SOFTNER/HBB MCC-FOR

SIZING KITCHEN

MACHINE MAKE

:HORIZON

1

HORIZON

MICROTECH PVT

LTD

336 SIZE KITCHEN PANEL

1&2 MAKE:K.B.SONS 1 MAKE : K.B .SONS

337

STRTER PANEL 3 FOR

CHILLED WATER MAKE

:COTMAC

1

COTMAC

ELECTRONICS PVT

LTD

338 STARTER PANEL 2 FOR

CRP MAKE :COTMAC 1

COTMAC

ELECTRONICS PVT

LTD

339

GRUNDFOS PRESSURE

BOOSTING PUMP PANEL

1 MAKE :GRUNDFOS /

JAY PUMP SYSTEM

1 JAY PUMPS P LTD

340

CONTROL PANEL

FORWATER

TREATMENT PLANT-

PART NO-

WH823JCP02,D.G.NO-

WSH823JCP2

1 THERMAX

341

CONTROL PANEL

FORWATER

TREATMENT PLANT-

PART NO-

WH823JCP01,D.G.NO-

WSH823JCP1

1 THERMAX

342

FIRE FIGHTING PANEL

IN FIRE HOUSE MAKE

:AKHIL

1 AKHIL INDUSTRIS

343 FIRE ENGINE CONTROL

PANEL 1 AKHIL INDUSTRIS

Power Plant

344 Power CVL BOILER Complete 1 12000KG/HR STEAM Not

________________________________________________________________________________________________________

73

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

Plant System GENERATOR

12600KG/HR@100

Deg C F & A,STEAM

PRESSURE SAFETY

VALVE

:10.54KG/CM2G,WO

RKING PRESSURE

10KG/CM2,STEAM

TEMP: SATURATED

184 DEG C,TYPE OF

BOILER : WATER

TUBE,NATURAL

CIRCULATION.

Commissioned

345 Gas

Turbine

Power accessories of Gas

Turbine power plant 1 5.4 MW

Auxiliary Panel and

Main supply panel

Not

Commissioned

346

Gas

Compre

ssor

SCREW GAS

COMPRESSOR 1

Type EGS –S-

100/300 W (

Screw Type )

MODEL/TYPE-EGS-

S-100/300, MEDIUM

GAS SUCTION

PRESURE/TEMP: 1.5

BAR/35. Discharge

Pr/Temp – 18 Bar/60,

Nominal Flow Rate at

Nominal Condition/

Suction Flow –

2200NM3/HR(880/m3/

hr), Power at coupling-

265 KW, Rotating

Speed-2980 RPM,

Year of Const - 2008

Not

Commissioned

347

Tank &

Storage

system

ALFA LEVEL MANUAL

CLEANING TYPE

CENTRIFUGAL

SEPERATOR MODEL

MAB 206

1 M/s Alfa Level

348 F.O. STORAGE TANK 1 90 KL FUEL STORAGE

349 HSD. STORAGE TANK 1 250 KL FUEL STORAGE Not

Commissioned

350 HSD. STORAGE TANK 1 20 KL FUEL STORAGE Not

Commissioned

351 F.O. STORAGE TANK 1 10KL FUEL STORAGE

352 Thermax 400 TR CHILLER

+ Complete Motor System 2 400 TR

Model: Thermax 90

NOSO,400 TR.241.9

M3/HR

Not

Commissioned

353 AIR COMPRESSOR GX-3

F F + Receiver 2

5.3

L/S.(11.23006

FT3/MIN,19.08

M3/HR)

ATLAS COPCO Not

Commissioned

354

355 Office

Equipm

ELECTRIC GIZER

ALMONARD MAKE - 10 1.00 10 Ltr Make : ALMonard Working

________________________________________________________________________________________________________

74

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

ents LTR

356 GYSER ELECTRIC 35

LTR CAPACITY 1.00 35 Ltr Working

357 GYSER ELECTRIC 35

LTR CAPACITY 1.00 35 Ltr Working

358 Nilfisk CA 551 6 Floor Cleaing Macine Working

359 Nilfik P 3 -30 2 Working

360 Attix 961-01 2 Working

361

Nilfisk High Speed

Burnisher DR 1500H (

Viper )

2 Working

362 Nllfisk R305 ( CFM R 305 ) 2 Working

363

Industrial Vaccum Cleaner

for Dry Model GS 83 Cotton

EU 220-240v Tech Spec.

1 Working

364

AQUA GUARD PURE

CHILL (COOLING

CAPACITY 80

LTR/STORAGE

CAPACITY 120 LTR)

MODEL 120 PSS

6 Capacity 80 Ltr /Hr Working

365 Advance Panel A.C for

Process Panel Cap :2000W 20

Panel Cooling

Purpose Working

366 Advance Panel A.C for

Process Panel Cap :3000W 5

Panel Cooling

Purpose Working

367

AC

WINDOW AIR

CONDITIONER 1.5 TON

BLUE STAR WAE181YA

10.0

0 Old

368

3 STAR,1.5 TR SPLIT AIR

CONDITIONERS.MODEL

NO.3HW181YB

5.00 Old

369

3 STAR 1.5 TR SPLIT AIR

CONDITIONER WITH

COR-

DLESS REMOTE, MODEL

3HW181YB

6.00 Old

370

3 STAR 1.5 TR SPLIT AIR

CONDITIONER WITH

CORDLESS REMOTE

MODEL - 3HW181YC

5.00 Old

371

3 STAR,1.5 TR SPLIT AIR

CONDITIONERS..3HW181

YB

2.00 Old

372

3 STAR,2.0 TR SPLIT AIR

CONDITIONERS.MODEL

NO.3HW241YB

2.00 Old

373

3 STAR 2.0 TR SPLIT AIR

CONDITIONER WITH

COR-

1.00 Old

________________________________________________________________________________________________________

75

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

DLESS REMOTE, MODEL

3HW241YB

374

3 STAR 2.0 TR SPLIT AIR

CONDITIONER WITH

CORDLESS REMOTE

MODEL - 3HW241YC

1.00 Old

375

3 STAR 2.0 TR SPLIT AIR

CONDITIONER WITH

CORDLESS REMOTE

MODEL - 3HW241YC

2.00 Old

376

3 STAR 2.5 Tr. SPLIT AIR

CONDITIONER WITH

CORDLESS REMOTE/3

PHASE

2.00 Old

377

AIR CONDITIONER

WITH CORDLESS

REMOTE 3.0 TR

MEGA SPLIT, MODEL

MHWE 361 RB, SR.NO.

IDU361-

RB0900132,133

2.00 Old

378

3 STAR,3.0 TR SPLIT AIR

CONDITIONERS.MEGA

SPLI/3PHASE

1.00 Old

379

SAMSUNG WINDOW

A/C(1.5)TON

M.NO.AWT18QKA

1.00 Old

380

SAMSUNG MAKE

WINDOW AIR

CONDITIONER 1.5 TON

CAP MODEL 18 ZKA

1.00 Old

381

SAMSUNG MAKE

WINDOW AIR

CONDITIONER 1.5 TON

CAP MODEL 18 ZKA

3.00 Old

382 WINDOW A/C 2 TON

SAMSUNG MODEL AW24 1.00 Old

383 SPLIT A/C 1.5 TON MAKE

SAMSUNG MODEL FK-18 1.00 Old

384 SPLIT A/C 1.5 TON MAKE

SAMSUNG MODEL FK-18 5.00 Old

385

BLUE STAR MAKE 1

STAR RATED ENERGY

EPPICIENT

WINDOW TYPE AIR

CONDITIONER, MODEL -

WAE 181YB, CAP - 1.5 TR

2 Old

386 Furnitur

e &

IND310,60T 1 60T Mettler Toledo Working

387 MINICAT 1 600KG Mettler Toledo Working

________________________________________________________________________________________________________

76

Sr. No. Section Name of the machine Qty Installed

Capacity

Other Technical

Specifications if any

Working / not

working

388 Fixtures BBK422- 3X5 1 3.1KG Mettler Toledo Working

389 BBK422- 3X5 1 7.1KG Mettler Toledo Working

390 IND690 1 32KG Mettler Toledo Working

391 JL503-C5/03 1 102 Gms Mettler Toledo Working

392 PG4002-S DELTA RANGE 1 4.1KG Mettler Toledo Working

393 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working

394 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working

395 MINICAT 1 600KG Mettler Toledo Working

396 RW11-3220-044 1 6KG Mettler Toledo Working

397 RW11-3220-044 1 6KG Mettler Toledo Working

398 RW11-3220-044 1 6 KG Mettler Toledo Working

399 PCA320-1 1 1000KG Mettler Toledo Working

400 PCA320-1 1 1000KG Mettler Toledo Working

401 MINICAT 1 600KG Mettler Toledo Working

402 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working

403 PG6002-S DELTA RANGE 1 6.1KG Mettler Toledo Working

404 PG4002-S DELTA RANGE 1 4.1KG Mettler Toledo Working

405 ML204/A01 1 220 Gms Mettler Toledo Working

406 BBK422- 3CS 1 3.1KG Mettler Toledo Working

407 IND690 1 32KG Mettler Toledo Working

408 MINICAT 1 200KG Mettler Toledo Working

409 RW11-4220-044 1 15 KG Mettler Toledo Working

410 RW11-4220-044 1 15 KG Mettler Toledo Working

411 MINICAT 1 300KG Mettler Toledo Working

412 MAG-BA-01GA 1 320 Gms PRECISA Working

413 200D 1 200 Gms DHONA Working

414 IND225 1 100KG Mettler Toledo Working

415 Computers

416

Vehicles

Maruti Ritz 1 MH-01-AX-

6379

417 Sumo Grande 1 GJ-16-AP-2163

418 Swift Dezire 1 GJ-16-AJ-4523