e-bid document for procurement of milk plastic hdpe …€¦ · in token of acceptance of above)...

75
(Signed & Sealed by the tenderer 1 RCDF in token of acceptance of above) Tender form for Milk Plastic Crate TENDER ID NO. 2020_RCDF_174932_1 e-BID DOCUMENT FOR PROCUREMENT OF MILK PLASTIC HDPE CRATES OF ISI TYPE MINIMUM 1.5 KG WEIGHT AND OF 168 MM HEIGHT EACH CRATE ON RUNNINIG RATE CONTRACT BASIS Single Stage - Two Parts Bid RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED “SARAS SANKUL” J. L. N. MARG, JAIPUR – 302017 Ph. No. 2702501-08 : Direct: 0141-2710209 : Website : www.sarasmilkfed.rajasthan.gov.in E-Mail : [email protected]

Upload: others

Post on 30-Apr-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

(Signed & Sealed by the tenderer 1 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

TENDER ID NO. 2020_RCDF_174932_1

e-BID DOCUMENT

FOR PROCUREMENT OF MILK

PLASTIC HDPE CRATES OF ISI

TYPE MINIMUM 1.5 KG

WEIGHT AND OF 168 MM

HEIGHT EACH CRATE

ON RUNNINIG RATE

CONTRACT BASIS

Single Stage - Two Parts Bid

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

“SARAS SANKUL” J. L. N. MARG, JAIPUR – 302017

Ph. No. 2702501-08 : Direct: 0141-2710209 : Website : www.sarasmilkfed.rajasthan.gov.in

E-Mail : [email protected]

(Signed & Sealed by the tenderer 2 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

“SARAS SANKUL” J. L. N. MARG, JAIPUR – 302017

Ph. No. 2702501-08 : Direct: 0141-2710209 : Website : www.sarasmilkfed.rajasthan.gov.in

E-Mail : [email protected]

RATE CONTRACT FOR MILK PLASTIC HDPE CRATES OF ISI

TYPE MINIMUM 1.5 KG WEIGHT AND OF 168 MM HEIGHT

EACH CRATE

Table of Contents

Disclaimer …………………………………………………………….……..…….…… 3

Critical Dates ................................................................................................................... 4

Notice Inviting Bids ....................................................................................................... 5-7

Section I: Instructions to Bidders (ITB) ……………………....………..……….…… 8-25

Section II: Bid Data Sheet…………………….…..…..………...………….……….. 26-30

Section III: Qualification and Evaluation Criteria ………………….………….…… 31-32

Section IV: Schedule of Supply ......................................…………………………... 33-39

Section V:Bidding Forms ….................……………………………………..…..... 40-60

Section VI (A):General and Special Conditions of Contract……….……………... 61-68

Section VI (B): Contract Forms and Performance Security……..…………..……. 69-75

(Signed & Sealed by the tenderer 3 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

“SARAS SANKUL” J. L. N. MARG, JAIPUR – 302017

Ph. No. 2702501-08 : Direct: 0141-2710209 : Website : www.sarasmilkfed.rajasthan.gov.in

E-Mail : [email protected]

Disclaimer

A. The information contained in this E-tender/Bid document provided to the Bidder(s), by or

on behalf of Rajasthan Co-operative Dairy Federation Limited or any of its employees or

advisors, is provided to the Bidder(s) on the terms and conditions set out in this E-

tender/Bid document and all other terms and conditions subject to which such information

is provided.

B. The purpose of this E-tender/Bid document is to provide the Bidder(s) with information to

assist the formulation of their Proposals. This E-tender/Bid document does not purport to

contain all the information which each Bidder may require. This E-tender/Bid document

may not be appropriate for all persons, and it is not possible for Rajasthan Co-operative

Dairy Federation Limited, its employees or advisors to consider the business/ investment

objectives, financial situation and particular needs of each Bidder who reads or uses this

E-tender/Bid document. Each Bidder should conduct its own investigations and analysis

and should check the accuracy, reliability and completeness of the information in this E-

tender/Bid document and where necessary obtain independent advice from appropriate

sources.

C. Rajasthan Co-operative Dairy Federation Limited, its employees and advisors make no

representation or warranty and shall incur no liability under any law, statute, rules or

regulations as to the accuracy, reliability or completeness of the E-tender/Bid document.

D. Rajasthan Co-operative Dairy Federation Limited may, in its absolute discretion, but

without being under any obligation to do so, update, amend or supplement the

information in this E-tender/Bid document.

(Signed & Sealed by the tenderer 4 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

“SARAS SANKUL” J. L. N. MARG, JAIPUR – 302017

Ph. No. 2702501-08 : Direct: 0141-2710209 : Website : www.sarasmilkfed.rajasthan.gov.in

E-Mail : [email protected]

RATE CONTRACT FOR MILK PLASTIC HDPE CRATES OF ISI

TYPE MINIMUM 1.5 KG WEIGHT AND OF 168 MM HEIGHT

EACH CRATE

Critical Dates

S. No. Particulars Date

1. Date of publishing Notice Inviting Bids and Bidding

Document on State Public Procurement Portal

Upto 5.00 PM

on 03.02.2020

2.

Date from which Bidding Document will be provided from

the web-site of Rajasthan Co-operative Dairy Federation

Limited i.e.www.sarasmilkfed.rajasthan.gov.in or can be

downloaded from e-procurement or State Public

Procurement Portal

5.00 PM on

03.02.2020

3. Date of Pre bid meeting to be held at RCDF 11.30 AM on

17.02.2020

4. Clarifications end date 3.00 PM on

18.02.2020

5. Last time and date upto which Bids can be submitted/

uploaded on e-procurement website

Upto 3.00 PM of

11.03.2020

6. Time and date of opening of Technical Bid 2.30 PM of

12.03.2020

7. Time and date of opening of Financial Bid To be declared

later

(Signed & Sealed by the tenderer 5 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

“SARAS SANKUL” J. L. N. MARG, JAIPUR – 302017

Ph. No. 2702501-08 : Direct: 0141-2710209 : Website : www.sarasmilkfed.rajasthan.gov.in

E-Mail : [email protected]

No. RCDF/Pur/F.(Packaging/Cattle Feed Material)/2020/44854-89 Dated: 03 February, 2020

NOTICE INVITING E-TENDERS

1. Single Stage Two Parts unconditional online e-Tenders/e-Bids are invited by Rajasthan Co-

Operative Dairy Federation Ltd., Jaipur for the procurement of following materials listed

below from eligible bonafide manufacturers or their authorized Suppliers as per details

given in the bid document.

S.

No. Name of Article

Tender ID of

eproc.

website

Last time

and date for

submission

of online e-

Bid/tender

Date and

time for

opening of

the e-Bid/

tender

(Technical)

Date and

time of Pre-

bid meeting

Estimated

annual

requirement

Estimated

value of

bid (Rs. In

lacs)

Amount of

Bid

Security

(Rupees)

Bid/

Tender

Fee

(Rupees)

Bid/ Tender

Processing

Fee

(Rupees)

1 Lined Carton for 1 Litre

Ghee Packing

2020_RCDF

_174922_1

Upto 3.00

PM of

17.03.2020

2.30 PM of

18.03.2020

11.30 AM

on

17.02.2020

11170000

Nos. 644.50 12,89,000/- 1000/- 1000/-

2 Lined Carton for ½ Litre

Ghee Packing

2020_RCDF

_174924_1

Upto 3.00

PM of

17.03.2020

2.30 PM of

18.03.2020

11.30 AM

on

17.02.2020

5220000

Nos. 200.00 4,00,000/- 1000/- 1000/-

3 Polythene Liner for filling

25 kg. SMP

2020_RCDF

_174925_1

Upto 3.00

PM of

11.03.2020

2.30 PM of

12.03.2020

11.30 AM

on

17.02.2020

81500 Kg. 95.00 1,90,000/- 1000/- 1000/-

4 Corrugated Fibre Board

Cartons (CFC) for packing 15 kg. Ghee Tin

2020_RCDF

_174937_1

Upto 3.00

PM of

23.03.2020

2.30 PM of

24.03.2020

11.30 AM

on

17.02.2020

835000

Nos. 97.50 1,95,000 1000/- 1000/-

5

Single Wall Corrugated

Fibre Board Boxes for 1

Litre Ghee Carton Packing

(10 pouches of 1 litre each

in 1 CFC) 2020_RCDF

_174927_1

Upto 3.00

PM of

23.03.2020

2.30 PM of

24.03.2020

11.30 AM

on

17.02.2020

1070000

Nos. 88.00

2,40,000/- 1000/- 1000/- Single Wall Corrugated

Fibre Board Boxes for ½

Litre Ghee Carton Packing

(20 pouches of ½ litre each

in 1 CFC)

387000

Nos. 32.00

6 Dahi Cup for 200 gmDahi 2020_RCDF

_174928_1

Upto 3.00

PM of

02.03.2020

2.30 PM of

03.03.2020

11.30 AM

on

17.02.2020

31770000

Nos. 402.00 8,04,000/- 1000/- 1000/-

7 Vitamin AD2 2020_RCDF

_174930_1

Upto 3.00

PM of

02.03.2020

2.30 PM of

03.03.2020

11.30 AM

on

17.02.2020

7710 Kg. 55.50 1,11,000/- 1000/- 1000/-

8

Milk Plastic HDPE Crates

of ISI Type minimum 1.5

kg. Weight and of 168 MM Height each Crate

2020_RCDF

_174932_1

Upto 3.00

PM of

11.03.2020

2.30 PM of

12.03.2020

11.30 AM

on

17.02.2020

283600

Nos. 538.50 10,77,000/- 1000/- 1000/-

9 Vitamin-E 2020_RCDF

_174935_1

Upto 3.00

PM of

17.03.2020

2.30 PM of

18.03.2020

11.30 AM

on

17.02.2020

21700 Kgs. 157.32 314650/- 1000/- 1000/-

10 Vitamin AD3 2020_RCDF

_174936_1

Upto 3.00

PM of

17.03.2020

2.30 PM of

18.03.2020

11.30 AM

on

17.02.2020

5155 Kgs. 335.07 670150/- 1000/- 1000/-

(Signed & Sealed by the tenderer 6 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

The Complete Bidding Documents can be downloaded from our website

www.sarasmilkfed.rajasthan.gov.in, www.eproc.rajasthan.gov.in and

www.sppp.rajasthan.gov.in. E-Bids will be submitted only on http://eproc.rajasthan.gov.in.

(R.K. Suthar)

General Manager (Pur)

2. The Bid is for a Rate Contract for one year.

3. The complete Bidding Document including the Critical Dates, NIB, Instruction to Bidders,

Bid Data Sheet, Qualification and Evaluation Criteria, Schedule of Supply, Bidding Form,

General & Special Conditions of Contract and Contract Forms Procedure of Bidding etc. can

be seen at or downloaded from www.sarasmilkfed.rajasthan.gov.in. Alternatively, these

may be seen and downloaded from the website of State Public Procurement Portal,

www.sppp.rajasthan.gov.in and website of e-procurement www.eproc.rajasthan.gov.in.

4. The scan copy of Bank Draft/Banker‟s Cheque being deposited towards price of Bidding

Document, Bank Draft/Banker‟s Cheque/Bank Guarantee being deposited towards Bid

Security/ Bid Securing Declaration, as applicable and Tender Processing Fee, alongwith the

bid must be uploaded on www.eproc.rajasthan.gov.in. Details of Bank Draft/Banker’s

Cheque/Bank Guarantee etc. are to be mentioned on www.eproc.rajasthan.gov.in at

respective columns. Three separate Bank Drafts shall be deposited towards price of bid

document, tender processing fee and bid security. However, Bank Guarantee may also

be deposited towards bid security.

5. The original Demand draft/ Banker‟s cheque and Bank Guarantee in the specified format,

from a Scheduled Bank in India, shall be submitted personally or dropped in the Bid Box or

by post in sealed envelopes deposited in the office of Rajasthan Co-operative Dairy

Federation Limited, Saras Sankul, JLN Marg, Jaipur-17 before scheduled Time and date of

opening of technical Bid, failing which the bid shall be rejected.

6. The Rajasthan Co-operative Dairy Federation Limited is not bound to accept the lowest Bid

and may reject any or all Bids in part or full without assigning any reason thereof.

General Manager (Pur)

(Signed & Sealed by the tenderer 7 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION LIMITED

“SARAS SANKUL” J. L. N. MARG, JAIPUR – 302017

Ph. No. 2702501-08 : Direct: 0141-2710209 : Website : www.sarasmilkfed.rajasthan.gov.in

E-Mail :[email protected]

No. RCDF/Pur/F.(Packaging/Cattle Feed Material)/2020/44854-89 Dated: 03 February, 2020

NOTICE INVITING E-TENDERS

Single Stage Two Parts unconditional online e-Tenders/e-Bids are invited by Rajasthan Co-Operative Dairy

Federation Ltd., Jaipur for the procurement of “Lined Carton for 1 Litre Ghee Packing(UBN No.

CDF1920GLRC01232), Lined Carton for ½ Litre Ghee Packing (UBN No. CDF1920GLRC01233), Polythene

Liner for filling 25 kg. SMP (UBN No. CDF1920GLRC01234), Corrugated Fibre Board Cartons (CFC) for

packing 15 kg. Ghee Tin (UBN No. CDF1920GLRC01235), Single Wall Corrugated Fibre Board Boxes for 1

Litre Ghee Carton Packing (10 pouches of 1 litre each in 1 CFC) and for ½ Litre Ghee Carton Packing (20

pouches of ½ litre each in 1 CFC) (UBN No. CDF1920GLRC01236), Dahi Cup for 200 gm Dahi (UBN No.

CDF1920GLRC01237), Vitamin AD2 (UBN No. CDF1920GLRC01238), Milk Plastic HDPE Crates of ISI

Type minimum 1.5 kg. Weight and of 168 MM Height each Crate (UBN No. CDF1920GLRC01239), Vitamin-

E (UBN No. CDF1920GLRC01240) and Vitamin AD3 (UBN No. CDF1920GLRC01241)” from eligible

bonafide manufacturers or their authorized suppliers as per details given in the respective bid document.

The Complete Bidding Documents can be downloaded from our website

www.sarasmilkfed.rajasthan.gov.in, www.eproc.rajasthan.gov.in and www.sppp.rajasthan.gov.in. E-Bids shall be

submitted only on http://eproc.rajasthan.gov.in.

(R.K. Suthar)

General Manager (Purchase)

Copy to:-

1. Financial Advisor, RCDF, Jaipur.

2. General Manager (P&A), RCDF, Jaipur - Please arrange to get the above NIT published in one All India

level daily English newspaper with wide circulation and One State level leading daily newspaper having

circulation of fifty thousand copies and above of each newspaper. Kindly send the published copy of NIT to

the undersigned.

3. Manager (Systems), RCDF, Jaipur –Please arrange to get the above NIT uploaded on the RCDF website

alongwith the enclosed detailed NIT & tender forms and also arrange to publish the same with individual

Tender ID on e-procurement website by 03.02.2020 upto 5.00 PM.

4. Dy. Manager (Systems), RCDF, Jaipur Nodal officer, State Public Procurement Portal – Please also arrange

to get the above NIT/tenders uploaded on the State Public Procurement Portal by 3.02.2020 upto5.00 PM.

5. Dy. Manager (Admn.), RCDF, Jaipur- Please arrange to display the copy of NIT on the Notice Board.

6. Managing Director/ Manager, All Milk Unions/ Cattle Feed Plants/ Units of RCDF – Please arrange to

display the copy of NIT on the Notice Board of all offices of Milk Unions/Cattle Feed Plants/Units and may

send a copy to prospective bidders.

General Manager (Purchase)

(Signed & Sealed by the tenderer 8 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Section I

Instruction to Bidders/Tenderer

(ITB)

Important Instruction:- The Law relating to procurement “The Rajasthan Transparency

in Public Procurement Act, 2012” [hereinafter called the Act] and the “Rajasthan

Transparency in Public Procurement Rules, 2013” [hereinafter called the Rules] under

the said Act have come into force which are available on the website of State Public

Procurement Portal http://sppp.rajasthan.gov.in Therefore, the Bidders are advised to

acquaint themselves with the provisions of the Act and the Rules before participating in

the bidding process. If there is any discrepancy between the provisions of the Act and the

Rules and this Bidding Document, the provisions of the Act and the Rules shall prevail.

S. No. Particulars Clause Description

1. General

1.1 Definitions 1.1.1 “Act” means the Rajasthan Transparency in Public Procurement

Act, 2012.

1.1.2 “Bid” means a formal offer made by a Bidder/Tenderer in form of

an e-tender/Bid including Technical Bid and Financial Bid to

Rajasthan Cooperative Dairy Federation Ltd., Jaipur in response to

Notice Inviting/e-tenders/ Bids.

1.1.3 “Bidder/Tenderer” means a person or any entity who submits a

Bid/Tender who may be selected to provide the Goods to

Rajasthan Cooperative Dairy Federation Ltd., Jaipur under the

Contract.

1.1.4 “Bidding Document means this entire Document consisting of

Notice Inviting Bids and I to VI Sections made available to the

Bidders by Rajasthan Cooperative Dairy Federation Ltd., Jaipur

for selection of the successful Bidder/Tenderer.

1.1.5 “Client/ Rajasthan Cooperative Dairy Federation Ltd., Jaipur”

means the self-governed society formed by Government of

Rajasthan and registered under the Rajasthan Cooperative

Societies Act, 1965. The selected Bidder/Tenderer will sign the

Contract with Rajasthan Cooperative Dairy Federation Ltd., Jaipur

for the procurement of Goods.

1.1.6 “Contract” means the Contract which shall be signed by Rajasthan

Cooperative Dairy Federation Ltd., Jaipur with the selected

successful Bidder/Tenderer and all its attached documents and the

appendices.

1.1.7 “Day” means a calendar day.

1.1.8 “Government/ GOR” means the Government of Rajasthan.

1.1.9 “Managing Director, Rajasthan Cooperative Dairy Federation

Ltd., Jaipur” means the executive head of Rajasthan Cooperative

Dairy Federation Ltd., Jaipur.

(Signed & Sealed by the tenderer 9 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

1.1.10 “Instructions to Bidders (ITB)”, “Bid Data Sheet (BDS)” are the

documents which provide the Bidders/Tenderer with information

needed to prepare their Bids. In case of any variation in the same,

the Bid Data Sheet will prevail.

1.1.11 “LOI/ LOA” means the Letter of Intent/ Acceptance which will be

sent by Rajasthan Cooperative Dairy Federation Ltd., Jaipur to the

selected successful Bidder/Tenderer.

1.1.12 “Personnel” means professionals and support staff which will be

working for the Bidder/Tenderer to perform the Goods.

1.1.13 “Bid/Proposal” means the Technical Bid/Proposal and the

Financial Bid/Proposal submitted by the Bidder/Tenderer.

1.1.14 “Rules” means the Rajasthan Transparency in Public Procurement

Rules, 2013.

1.1.15 “Goods” means the tasks to be performed by the selected

Bidder/Tenderer within the Contract period.

1.1.16 Terms not defined here shall have the same meaning as given to

them in the Act.

2.1 Scope of Bid 2.1.1 In support of the Invitation to Bid indicated in the Bid Data Sheet

(BDS), (The Procuring entity) Rajasthan Co-operative Dairy

Federation Limited, Jaipur issues this Bidding Document for the

supply of Goods/ equipment and Related Services incidental

there to as specified in Schedule of Supply.

2.1.2 Throughout this Bidding Document:

i. The term “in writing” means communicated in written form

through letter/fax/e-mail etc. with proof of dispatch;

ii. If the context so requires, singular means plural and vice

versa; and

iii. “Day” means calendar day.

2.2 Source of Funds 2.2.1 The expenditure for procurement of Goods/ equipment and

Related Services will be met by the provisions/ resources of

Rajasthan Co-operative Dairy Federation Limited, Jaipur

(Procuring Entity).

2.3 Code of Integrity 2.3.1 Any person participating in the procurement process shall -

(a) not offer any bribe, reward or gift or any material benefit

either directly or indirectly in exchange for an unfair

advantage in procurement process or to otherwise

influence the procurement process;

(b) not misrepresent or omit that misleads or attempts to

mislead so as to obtain a financial or other benefit or avoid

an obligation;

(c) not indulge in any collusion, Bid rigging or anti-

competitive behavior to impair the transparency, fairness

and progress of the procurement process;

(d) not misuse any information shared between the procuring

Entity and the Bidders with an intent to gain unfair

advantage in the procurement process;

(Signed & Sealed by the tenderer 10 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

(e) not indulge in any coercion including impairing or harming

or threatening to do the same, directly or indirectly, to any

party or to its property to influence the procurement

process;

(f) not obstruct any investigation or audit of a procurement

process;

(g) disclose conflict of interest, if any; and

(h) disclose any previous transgressions with any Entity in

India or any other country during the last three years or

any debarment by any other procuring entity.

Conflict of

Interest

2.3.2 A conflict of interest is considered to be a situation in which a

party has interests that could improperly influence that party‟s

performance of official duties or responsibilities, contractual

obligations, or compliance with applicable laws and regulations.

i. A Bidder may be considered to be in conflict of interest with

one or more parties in this bidding process if, including but

not limited to:

a. Have controlling partners/share holders in common; or

b. Receive or have received any director in direct subsidy

from any of them; or

c. Have the same legal representative for purposes of this

Bid; or

d. Have a relationship with each other, directly or through

common third parties, that puts them in a position to have

access to information about or influence on the Bid of

another Bidder, or influence the decisions of the Procuring

Entity regarding this bidding process; or

e. the Bidder participates in more than one Bid in this

bidding process. Participation by a Bidder in more than

one Bid will result in the disqualification of all Bids in

which the Bidder is involved. However, this does not

limit the inclusion of the same subcontractor, not

otherwise participating as a Bidder, in more than one Bid;

or

f. the Bidder or any of its affiliates participated as a

consultant in the preparation of the design or technical

specifications of the Goods and Related Services that are

the subject of the Bid; or

g. Bidder or any of its affiliates has been hired (or is

proposed to be hired) by the Procuring Entity as engineer-

in-charge/ consultant for the contract.

ii. The Bidder shall have to give a declaration regarding

compliance of the Code of Integrity prescribed in the Act, the

Rules and stated above in this Clause along with its Bid, in

the format specified in the Bidding Forms.

(Signed & Sealed by the tenderer 11 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Breach of Code

of Integrity by the

Bidder:

2.3.3 Without prejudice to the provisions of Chapter IV of the Rajasthan

Transparency in Public Procurement Act, in case of any breach of

the Code of Integrity by a Bidder or prospective Bidder, as the

case may be, the Procuring Entity may take appropriate action in

accordance with the provisions of sub-section (3) of section 11

and section 46 of the Act.

2.4 Eligible Bidders

2.4.1 As specified in the Act and Rajasthan Transparency in Public

Procurement Rules.

2.4.2 No Bidder who is not registered under the GST prevalent in the

State where his business is located shall bid. The Goods Service

Tax Registration Number must be quoted.

2.4.3

A Bidder should not have a conflict of interest in the procurement

in question as stated in the Rule 81 and this Bidding document.

2.4.4

A Bidder debarred under section 46 of the Act shall not be eligible

to participate in any procurement process undertaken by -

(a) any Procuring Entity, if debarred by the State Government; and

(b) a Procuring Entity if debarred by such procuring Entity.

3. Contents of Bidding Document

3.1 Sections of the

Bidding

Document

3.1.1 The Bidding Document consists of Sections indicated below, and

should be read in conjunction with any Addenda issued there to:

Section I. Instructions to Bidders (ITB)

Section II. Bid Data Sheet (BDS)

Section III. Qualification and Evaluation Criteria

Section IV. Schedule of Supply Section V. Bidding Forms Section VI(A). General & Special Conditions of Contract (GSCC)

Section VI(B). Contract Forms and Performance Security

The Notice Inviting Bids issued by the Procuring Entity shall also

be a part of the Bidding Document.

3.1.2 i. The Bidding Document shall be placed on the website of State

Public Procurement Portal www.sppp.rajasthan.gov.in, e-

Procurement Portal website www.eproc.rajasthan.gov.in and

the departmental website www.sarasmilkfed.rajasthan.gov.in.

The prospective Bidders shall be permitted to download the

Bidding Document from the website and pay its price while

submitting the filled-up Bidding Document to the e-

procurement website www.eproc.rajasthan.gov.in, as per

procedure laid down in the bidding document.

3.1.3 The Procuring Entity is not responsible for the completeness of

the Bidding Document and its addenda, if they were not

downloaded correctly from the Procuring Entity‟s website/ State

Public Procurement Portal/e-Procurement Portal.

(Signed & Sealed by the tenderer 12 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

3.1.4 The Bidder is expected to examine all instructions, forms, terms,

and specifications in the Bidding Document. Failure to furnish

all information or authentic documentation required by the

Bidding Document may result in rejection of the Bid.

3.2 Clarification of

Bidding

Document and

Pre-Bid

Conference

3.2.1 The Bidder shall be deemed to have carefully examined the

conditions, specifications, size, make and drawings, etc., of the

Goods and Related Services to be supplied. If any Bidder has any

doubts as to the meaning of any portion of the conditions or of

the specifications, drawings etc., it shall, before submitting the

Bid, refer the same to the Procuring Entity and get clarifications.

A Bidder requiring any clarification of the Bidding Document

shall contact the Procuring Entity in writing at the Procuring

Entity‟s address indicated in the BDS. The Procuring Entity will

respond in writing to any request for clarification, within seven

days, provided that such request is received no later than twenty-

one (21) days prior to the deadline for submission of Bids. The

Procuring Entity shall forward copies of its response to all

Bidders who have acquired/ procured the Bidding Document

directly from it including a description of the inquiry but without

identifying its source. It shall also be placed on the websites of

State Public Procurement Portal and should the Procuring Entity

deem it necessary to amend the Bidding Document as a result of

a clarification, it shall do so following the procedure under

Amendment of Bidding Document.

3.2.2 The Bidder or his authorized representative is invited to attend

the Pre- Bid Conference, if provided for in the BDS. The purpose

of the Pre- Bid Conference will be to clarify issues and to answer

questions on any matter related to this procurement that may be

raised at that stage.

3.2.3 The Bidder is requested, to submit questions in writing, to reach

the Procuring Entity not later than one week before the Pre- Bid

Conference.

3.2.4 Minutes of the Pre-Bid Conference, including the text of the

questions raised, and the responses given, without identifying the

source, will be transmitted promptly to all Bidders who have

acquired the Bidding Document and will also be placed on the

State Public Procurement Portal. Any modification to the

Bidding Document that may become necessary as a result of the

Pre-Bid Conference shall be made by the Procuring Entity

exclusively through the issue of an addendum (part of Bidding

Document) and not through the minutes of the Pre-Bid

Conference.

3.2.5 At any time prior to the deadline for submission of the Bids, the

Procuring Entity, suo motto, may also amend the Bidding

Document, if required, by issuing an addenda which will form

part of the Bidding Document.

(Signed & Sealed by the tenderer 13 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

3.2.6 Non-attendance at the Pre-Bid Conference will not be a cause for

disqualification of a Bidder.

3.3 Amendment of

Bidding

Document

3.3.1 Any addendum issued shall be part of the Bidding Document and

shall be communicated in writing to all Bidders who have

obtained the Bidding Document directly from the Procuring

Entity. It shall also be uploaded on the website of State Public

Procurement Portal for prospective bidders to download.

3.3.2 At any time prior to the deadline for submission of the Bids, the

Procuring Entity, suo motto, may also amend the Bidding

Document, if required, by issuing an addenda which will form

part of the Bidding Document.

3.3.3 To give prospective Bidders reasonable time in which to take an

addendum into account in preparing their Bids, the Procuring

Entity may, at its discretion, extend the deadline for the

submission of the Bids, under due intimation to the Bidders who

have procured the Bidding Document from the Procuring Entity

and also by uploading it on the website of State Public

Procurement Portal.

4. Preparation of Bids

4.1 Cost of Bidding 4.1.1 The Bidder shall bear all costs associated with the preparation

and submission of its Bid, and the Procuring Entity shall not be

responsible or liable for those costs, regardless of the conduct or

outcome of the bidding process.

4.2 Language of Bid

4.2.1 The Bid, as well as all correspondence and documents relating to

the Bid exchanged by the Bidder and the Procuring Entity, shall

be written in the language specified in the BDS. Supporting

documents and printed literature that are part of the Bid may be

in another language provided they are accompanied by a self

attested accurate translation of the relevant passages duly

accepted by the Bidder in the language specified in the BDS, in

which case, for purposes of interpretation of the Bid, such

translation shall govern.

4.3 Documents

Comprising the

Bid

4.3.1 The Bid shall comprise of two envelopes (e-envelope on

www.eproc.rajasthan.gov.in) submitted simultaneously, one

containing the Technical Bid and the other the Financial or Price

Bid. Further technical bid and the financial bid shall contain

documents as per Bid Data Sheet.

4.4 Bid Submission

Sheets and Price

Schedules

4.4.1 The Bidder shall submit the Technical Bid and Financial Bid using

the appropriate Bid Submission Sheets provided in Bidding

Forms. These forms must be completed without any alterations to

their format, and no substitutes shall be accepted. All blank

spaces shall be filled in ink or typed with the information

requested.

4.4.2 The Bidder shall submit as part of the Financial Bid, the Price

Schedules for Goods and Related Services, according to their

origin as appropriate, using the forms provided in Bidding Forms.

(Signed & Sealed by the tenderer 14 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

4.5 Alternative

Bids

4.5.1 Unless otherwise specified in the BDS, alternative Bids shall not

be considered.

4.6 Currencies of

Bid.

4.6.1 The unit rates and the prices shall be quoted by the Bidder

entirely in Indian Rupees unless otherwise specified in BDS in

case of International Competitive Bidding (ICB). All payments

shall be made in Indian Rupees only, unless otherwise specified

in the BDS.

4.7 Documents

Establishing the

Eligibility of the

Bidder

4.7.1 To establish their eligibility Bidders shall complete the eligibility

declarations in the Bid Submission Sheet and Declaration Forms

included in Bidding Forms.

4.8 Documents

Establishing the

Eligibility of the

Goods and

Related Services

4.8.1 To establish the eligibility of the Goods and Related Services,

Bidders shall complete the declarations in the Technical Bid,

Price Bid Forms included in Bidding Forms.

4.9 Documents,

Tests, Samples

and Trials

Establishing the

Conformity of

the Goods and

Related Services

to the Bidding

Document

4.9.1 To establish the conformity of the Goods and Related Services to

the Bidding Document, the Bidder shall furnish as part of its Bid,

the documentary evidence (specifications, designs and drawings

and conformance to BIS or other acceptable codes) and where

asked for, supply samples, demonstrate trials or carry out tests as

specified in Schedule of Supply and any amendment thereof

issued in accordance with Amendment of Bidding Document.

4.10 Documents

Establishing the

Qualifications of

the Bidder

4.10.1 To establish its qualifications to perform the Contract, the Bidder

shall submit as part of its Technical Bid the documentary

evidence indicated for each qualification criteria specified in

Qualification and Evaluation Criteria.

4.11 Period of Validity

of Bids

4.11.1 Bids shall remain valid for the period specified in the BDS after

the Bid submission deadline date as specified by the Procuring

Entity. A Bid valid for a shorter period shall be rejected by the

Procuring Entity as non-responsive.

4.11.2 In exceptional circumstances, prior to the expiration of the Bid

validity period, the Procuring Entity may request Bidders to

extend the period of validity of their Bids. The request and the

responses shall be made in writing. If it is so requested, Bid

Security shall also be extended for a corresponding period. A

Bidder may refuse the request without forfeiting its Bid

Security. A Bidder granting the request shall not be required or

permitted to modify its Bid.

4.12 Bid Security 4.12.1 Unless otherwise specified in the BDS, the Bidder shall furnish

as part of its Bid, a Bid Security in original form and in the

amount and currency specified in the BDS.

4.12.2 Bid Security shall be 2% of the estimated value of subject matter of

procurement put to bid or as specified by the State Government.

(Signed & Sealed by the tenderer 15 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

4.12.3 The Bid Security may be given in the form of banker‟s cheque or

bank demand draft or bank guarantee, in specified format, of a

Scheduled Bank in India.

4.12.4 In lieu of Bid Security, a Bid Securing Declaration shall be taken

from Departments of the State Government and State Government

Public Sector Enterprises, Autonomous bodies, Registered

Societies, Cooperative Societies which are controlled or managed

by the State Government and Public Sector Enterprises of Central

Government. For the Bid Securing Declaration the Bidder shall

use the form included in Bidding Forms.

4.12.5 Bid Security instrument or cash receipt of Bid Security or a Bid

securing declaration shall necessarily accompany the sealed Bid.

Any Bid not accompanied by Bid Security or Bid Securing

Declaration, if not exempted, shall be liable to be rejected.

4.12.6 Bid Security of a Bidder lying with the Procuring Entity in respect

of other Bids awaiting decision shall not be adjusted towards Bid

Security for this Bid. The Bid Security originally deposited may,

however, be taken into consideration in case Bids are re-invited.

4.12.7 The issuer of the Bid Security and the confirmer, if any, of the Bid

Security, as well as the form and terms of the Bid Security, must be

acceptable to the Procuring Entity.

4.12.8 Prior to presenting a submission, a Bidder may request the

Procuring Entity to confirm the acceptability of proposed issuer of

a Bid Security or of a proposed confirmer, if different than as

specified. The Procuring Entity shall respond promptly to such a

request.

4.12.9 The bank guarantee presented as Bid Security shall be got

confirmed from the concerned issuing bank. However, the

confirmation of the acceptability of a proposed issuer or of any

proposed confirmer does not preclude the Procuring Entity from

rejecting the Bid Security on the ground that the issuer or the

confirmer, as the case may be, has become insolvent or is under

liquidation or has otherwise ceased to be creditworthy.

4.12.10 The Bid Security of unsuccessful Bidders shall be refunded soon

after final acceptance of the successful Bid and signing of Contract

Agreement and submission of Performance Security by the

successful Bidder.

4.12.11

The Bid Security taken from a Bidder shall be forfeited in the

following cases, namely:-

when the Bidder withdraws or modifies his Bid after opening of

Bids; or

when the Bidder does not execute the agreement within the

specified time after issue of letter of acceptance/ placement of

supply order; or

when the Bidder fails to commence the supply of the Goods or

Related Services as per supply order within the time specified; or

(Signed & Sealed by the tenderer 16 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

when the Bidder does not deposit the Performance Security in the

specified time period after the supply / work order is placed; or

if the Bidder breaches any provision of the Code of Integrity

prescribed for Bidders specified in the Act or

if the Bidder does not accept the correction of its Bid Price

pursuant to Correction of Arithmetical Errors.

4.12.12 In case of the successful Bidder, the amount of Bid Security may

be adjusted in arriving at the amount of the Performance Security,

or refunded if the successful Bidder furnishes the full amount of

Performance Security. No interest will be paid by the Procuring

Entity on the amount of Bid Security.

4.12.13 The Bid Security of a Joint Venture, Consortium or Association

must be in the name of the Joint Venture, Consortium or

Association that submits the Bid. If the Joint Venture, Consortium

or Association has not been legally constituted at the time of

Bidding, the Bid Security shall be submitted in the names of all

future partners as named in the letter of intent.

4.13 Format and

Signing of Bid

4.13.1 The E-Bidder shall prepare the Technical Bid and the Financial

Bid as specified on the State e-Procurement Portal,

http://eproc.rajasthan.gov.in.

5. Submission and Opening of Bids

5.1 Sealing and

Marking of Bids

5.1.1 Bidders shall submit their Bids electronically only as specified

on the State e-Procurement Portal, http://eproc.rajasthan.gov.in.

5.2 Deadline for

Submission of

Bids

5.2.1 Bids shall be submitted electronically, where asked for at the

place and upto the time and date specified in the Notice Inviting

Bids or an extension issued thereof.

5.3 Late Bids 5.3.1 The Procuring Entity shall not consider any Bid that arrives after

the deadline for submission of Bids.

5.4 Withdrawal,

Substitution and

Modification of

Bids

5.4.1 Withdrawal, substitution and modification of bids shall be as

given on the www.eproc.rajasthan.gov.in.

5.5 Bid Opening 5.5.1 Bid opening shall be as given on the www.eproc.rajasthan.gov.in.

1. Evaluation and Comparison of Bids

6.1 Confidentiality 6.1.1 Information relating to the examination, evaluation, comparison,

and post-qualification of Bids, and recommendation of contract

award, shall not be disclosed to Bidders or any other persons not

officially concerned with such process until information on

Contract award is communicated to all Bidders.

6.1.2 Any attempt by a Bidder to influence the Procuring Entity in the

examination, evaluation, comparison, and post qualification of

the Bids or Contract award decisions may result in the rejection

of its Bid, in addition to the legal action which may be taken by

the Procuring Entity under the Act and the Rules.

(Signed & Sealed by the tenderer 17 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

6.1.3 Notwithstanding Confidentiality clause, from the time of

opening the Bid to the time of Contract award, if any Bidder

wishes to contact the Procuring Entity on any matter related to

the Bidding process, it should do so in writing.

6.1.4 In addition to the restrictions specified in section 49 of the Act,

the Procuring Entity, while procuring a subject matter of such

nature which requires the procuring Entity to maintain

confidentiality, may impose condition for protecting

confidentiality of such information.

6.2 Clarification of

Technical or

Financial Bids

6.2.1 To assist in the examination, evaluation, comparison and

qualification of the Technical or Financial Bids, the Bid

evaluation committee may, at its discretion, ask any Bidder for a

clarification regarding its Bid. The committee‟s request for

clarification and the response of the Bidder shall be in writing.

6.2.2 Any clarification submitted by a Bidder with regard to his Bid

that is not in response to a request by the Bid evaluation

committee shall not be considered.

6.2.3 No change in the prices or substance of the Bid shall be sought,

offered, or permitted, except to confirm the correction of

arithmetical errors discovered by the Bid evaluation committee

in the evaluation of the financial Bids.

6.2.4 No substantive change to qualification information or to a

submission, including changes aimed at making an unqualified

Bidder, qualified or an unresponsive submission, responsive

shall be sought, offered or permitted.

6.3 Deviations,

Reservations and

Omissions in

Technical or

Financial Bids

6.3.1 During the evaluation of Technical or Financial Bids, the

following definitions shal l apply:

i. “Deviation” is a departure from the requirements

specified in the Bidding Document;

ii. “Reservation” is the setting of limiting conditions or

withholding from complete acceptance of the

requirements specified in the Bidding Document; and

iii. “Omission” is the failure to submit part or all of the

information or documentation required in the Bidding

Document.

6.4 Nonmaterial

Nonconformities

in Technical or

Financial Bids

6.4.1 Provided that a Technical or Financial Bid is substantially

responsive, the Procuring Entity may waive any nonconformity

(with recorded reasons) in the Bid that do not constitute a

material deviation, reservation or omission.

6.4.2 Provided that a Technical or Financial Bid is substantially

responsive, the Procuring Entity may request that the Bidder to

submit the necessary information or documentation, within a

reasonable period of time, to rectify nonmaterial nonconformities

or omissions in the Bid related to documentation requirements.

(Signed & Sealed by the tenderer 18 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Request for information or documentation on such

nonconformities shall not be related to any aspect of the

Financial Proposal of the Bid. Failure of the Bidder to comply

with the request may result in the rejection of its Bid.

6.5 Correction of

Arithmetical

Errors in

Financial Bid

6.5.1 Provided that a Financial Bid is substantially responsive, the

Procuring Entity will correct arithmetical errors during

evaluation of Financial Bids on the following basis:

i. if there is a discrepancy between the unit price and the total

price that is obtained by multiplying the unit price and

quantity, the unit price shall prevail and the total price shall

be corrected, unless in the opinion of the Procuring Entity

there is an obvious misplacement of the decimal point in

the unit price, in which case the total price as quoted shall

govern and the unit price shall be corrected;

ii. if there is an error in a total corresponding to the addition

or subtraction of subtotals, the subtotals shall prevail and

the total shall be corrected; and

iii. if there is a discrepancy between words and figures, the

amount in words shall prevail, unless the amount expressed

in words is related to an arithmetic error, in which case the

amount in figures shall prevail subject to (i) and (ii) above.

6.5.2 If the Bidder that submitted the lowest evaluated Bid does not

accept the correction of errors, its Bid shall be disqualified and

its Bid Security shall be forfeited or its Bid Securing Declaration

shall be executed.

6.6 Preliminary

Examination of

Technical or

Financial Bids

6.6.1 The Procuring Entity shall examine the Technical or Financial

Bids to confirm that all documents and technical documentation

requested in Documents Comprising the Bid have been provided.

6.7 Responsiveness

of Technical or

Financial Bids

6.7.1 The Procuring Entity‟s determination of the responsiveness of a

Technical or Financial Bid is to be based on the contents of the

Bid itself, as defined in Documents Comprising the Bid.

6.8 Examination of

Terms and

Conditions of the

Technical or

Financial Bids

6.8.1 The Procuring Entity shall examine the Bids to confirm that all

terms and conditions specified in the Bidding Documents have

been accepted by the Bidder without any material deviation or

reservation.

6.9 Evaluation of

Qualification of

Bidders in

Technical Bids

6.9.1 The determination o f qualification of a Bidder in evaluation of

Technical Bids shall be based upon an examination of the

documentary evidence of the Bidder‟s qualifications submitted

by the Bidder and in accordance with the qualification criteria

indicated in Qualification and Evaluation Criteria. Factors not

included in Qualification and Evaluation Criteria shall not be

used in the evaluation of the Bidder‟s qualification.

(Signed & Sealed by the tenderer 19 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

6.10 Price and/ or

Purchase

Preference

6.10.1 Price and/ or Purchase Preference, if applicable, shall be given in

accordance with the policy of State Government notified /

prevalent at the time of issue of NIB.

6.11 Evaluation of

Financial Bids

6.11.1

The Procuring Entity shall evaluate each Financial Bid, the

corresponding Technical Bid of which has been determined to

be substantially responsive.

6.11.2 To evaluate a Financial Bid, the Procuring Entity shall only use

all the criteria and methodologies defined in this Clause and in

Qualification and Evaluation Criteria. No other criteria or

methodology shall be permitted.

6.11.3 To evaluate a Financial Bid, the Procuring Entity shall consider

the following: i. the Bid Price quoted in the Financial Bid; ii. price adjustment for correction of arithmetical errors;

iii. price adjustment due to discounts offered, if permitted;

iv. price and/ or purchase preference in accordance with

relevant clause;

v. price adjustment due to application of all the evaluation

cri teria specified in Qualification and Evaluation

Criteria. These criteria may include factors related to the

characteristics, performance, and terms and conditions of

procurement of the Goods and Related Services which shall

be expressed to the extent practicable in monetary terms to

facilitate comparison of the Bids, unless otherwise specified.

6.11.4 i. Unless otherwise specified in BDS, the evaluation of the

total Price of a Bid shall be the price of delivering the

Goods and Related Services at the site(s) or place(s) of

delivery specified in Schedule of Supply, including all taxes

and duties payable on them, insurance, transport, loading,

unloading, erecting, stacking, testing, commissioning, etc.

6.12 Comparison

of Bids

6.12.1

The Procuring Entity shall compare all substantially responsive

Bids to determine the lowest-evaluated Bid, in accordance with

Evaluation of Financial Bids.

6.13 Post qualification

of the Bidder

6.13.1 The Procuring Entity shall determine to its satisfaction that the

Bidder that is selected as the lowest Bidder is qualified to

perform the Contract satisfactorily.

6.14 Negotiations 6.14.1

Except in case of procurement by method of single source

procurement or procurement by competitive negotiations, to the

extent possible, no negotiations shall be conducted after the pre-

Bid stage. All clarifications needed to be sought shall be sought

in the pre-Bid stage itself.

6.14.2 Negotiations may, however, be undertaken only with the lowest

Bidder under the following circumstances-

i. when ring prices have been quoted by the Bidders for the

subject matter of procurement; or

ii. when the rates quoted vary considerably and considered

much higher than the prevailing market rates.

(Signed & Sealed by the tenderer 20 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

6.14.3 The Bid evaluation committee shall have full powers to

undertake negotiations. Detailed reasons and results of

negotiations shall be recorded in the proceedings.

6.14.4 The lowest Bidder shall be informed about negotiations in

writing either through messenger or by registered letter and e-

mail (if available). A minimum time of seven days shall be

given for calling negotiations. In case of urgency the Bid

evaluation committee, after recording reasons, may reduce the

time, provided the lowest Bidder has received the intimation and

consented to holding of negotiations.

6.14.5 Negotiations shall not make the original offer made by the

Bidder inoperative. The Bid evaluation committee shall have

option to consider the original offer in case the Bidder decides to

increase rates originally quoted or imposes any new terms or

conditions.

6.14.6 In case of non-satisfactory achievement of rates from lowest

Bidder, the Bid evaluation committee may choose to make a

written counter offer to the lowest Bidder and if this is not

accepted by him, the committee may decide to reject and re-

invite Bids or to make the same counter-offer first to the second

lowest Bidder, then to the third lowest Bidder and so on in the

order of their initial standing in the bid evaluation till the

counter offer is accepted and supply order may be awarded to

the Bidder who accepts the counter-offer.

6.14.7 In case the rates even after the negotiations are considered very

high, fresh Bids shall be invited.

6.15 Procuring

Entity‟s Right to

Accept Any Bid,

and to Reject

Any or All Bids

6.15.1 The Procuring Entity reserves the right to accept or reject any

Bid, and to annul the Bidding process and reject all Bids at any

time prior to Contract award without assigning any reasons

thereof and without thereby incurring any liability to the Bidders.

2. Award of Contract

7.1 Procuring

Entity‟s Right to

Vary Quantities

7.1.1 If the Procuring Entity does not procure any subject matter of

procurement or procures less than the quantity specified in the

Bidding Document due to change in circumstances, the Bidder shall

not be entitled for any claim or compensation except otherwise

provided in the Conditions of Contract.

7.1.2 Repeat order for additional quantities may be placed within one

month of completion of the supply. The value of the additional

quantities may be upto 50% of the value of goods of the original

Contract at the rates and conditions given in the Contract, provided

the original supply order was given after inviting open competitive

bids. Delivery period of goods may be proportionately increased.

7.2 Dividing

quantities among

more than one

Bidder at the

7.2.1 As a general rule all the quantities of the subject matter of

procurement shall be procured from the Bidder, whose Bid is

accepted. However, when it is considered that the quantity of the

subject matter of procurement to be procured is very large and it

(Signed & Sealed by the tenderer 21 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

time of award may not be in the capacity of the Bidder, whose Bid is accepted, to

deliver the entire quantity or when it is considered that the subject

matter of procurement to be procured is of critical and vital nature,

in such cases, the quantity may be divided between the Bidder,

whose Bid is accepted and the second lowest Bidder or even more

Bidders in that order, in a fair, transparent and equitable manner at

the rates of the Bidder, whose Bid is accepted. Counter offer to first

lowest Bidder (L1), in order to arrive at an acceptable price, shall

amount to negotiation. However, any counter offer thereafter to

second lowest Bidder (L2), third lowest Bidder (L3) etc., (at the

rates accepted by L1) in case of splitting of quantities shall not be

deemed to be a negotiation.

7.3 Acceptance of the

successful Bid

and award of

contract

7.3.1 The Procuring Entity after considering the recommendations of

the Bid Evaluation Committee and the conditions of Bid, if any,

financial implications, samples, test reports, etc., shall accept or

reject the successful Bid.

7.3.2 Before award of the Contract, the Procuring Entity shall ensure

that the price of successful Bid is reasonable and consistent with

the required quality.

7.3.3 A Bid shall be treated as successful only after the competent

authority has approved the procurement in terms of that Bid.

7.3.4 The Procuring Entity shall award the contract to the Bidder whose

offer has been determined to be the lowest in accordance with the

evaluation criteria set out in Evaluation and Qualification Criteria

and if the Bidder has been determined to be qualified to perform

the contract satisfactorily.

7.3.5 Prior to the expiration of the period of validity of Bid, the

Procuring Entity shall inform the successful Bidder in writing, by

registered post or email, that its Bid has been accepted.

7.3.6 If the issuance of formal letter of acceptance (LOA) is likely to

take time, in the meanwhile a Letter of Intent (LOI) may be sent to

the successful Bidder. The acceptance of an offer is complete as

soon as the letter of acceptance or letter of intent is posted and/ or

sent by email (if available) to the address of the successful Bidder

given in its Bid.

7.4 Signing of

Contract

7.4.1 In the written intimation of acceptance of its Bid sent to the

successful Bidder, it shall also be asked to execute an agreement

in the format given in the Bidding Document on a non judicial

stamp of requisite value at his cost and deposit the amount of

Performance Security or a Performance Security Declaration, as

applicable, within a period specified in the BDS or where the

period is not specified in the BDS, then within fifteen days from

the date on which the LOA or LOI is dispatched to the Bidder.

Until a formal contract is executed, LOA or LOI shall constitute a

binding contract.

(Signed & Sealed by the tenderer 22 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

7.4.2 If the Bidder, whose Bid has been accepted, fails to sign a written

procurement contract or fails to furnish the required Performance

Security or Performance Security Declaration, as the case may be,

within the specified time period, the Procuring Entity shall forfeit

the Bid Security of the successful bidder/ execute the Bid Securing

Declaration and take required action against it as per the

provisions of the Act and the Rules.

7.4.3 The Bid Security and samples, if any, of the Bidders whose Bids

could not be accepted shall be refunded/ returned soon after the

contract with the successful Bidder is signed and his Performance

Security is obtained.

7.5 Performance

Security

7.5.1 Performance Security shall be solicited from the successful Bidder

except Department of the State Government and undertakings,

corporations, autonomous bodies, registered societies, co-operative

societies which are owned, controlled or managed by the State

Government and undertakings of Central Government. However, a

Performance Security Declaration shall be taken from them. The

State Government may relax the provision of Performance Security

in particular procurement.

7.5.2 The amount of Performance Security shall be five percent, or as

specified in the BDS, of the amount of the supply order. The

currency of Performance Security shall be Indian Rupees, if

otherwise not specified in BDS.

7.5.3 Performance Security shall be furnished in the form as specified in

BDS.

7.5.4 Performance Security is to be furnished in the form of a Bank

Demand Draft only.

7.5.5 Failure of the successful Bidder to submit the above-mentioned

Performance Security or sign the Contract shall constitute

sufficient grounds for the annulment of the award and forfeiture of

the Bid Security. In that event the Procuring Entity may either

cancel the procurement process or if deemed appropriate, award

the Contract at the rates of the lowest Bidder, to the next lowest

evaluated Bidder whose offer is substantially responsive and is

determined by the Procuring Entity to be qualified to perform the

Contract satisfactorily.

7.5.6 Forfeiture of Performance Security: The amount of Performance

Security in full or part may be forfeited in the following cases :-

i. when the Bidder does not execute the agreement within the

specified time period after issue of letter of acceptance/

placement of supply order; or

(Signed & Sealed by the tenderer 23 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

ii. when the Bidder fails to commence the supply of the Goods

or Related Services as per supply order within the time

specified; or

iii. when Bidder fails to commence or make complete supply

of the Goods or Related Services satisfactorily within the

time specified; or

iv. when any terms and conditions of the contract is breached;

or

v. Failure by the Bidder to pay the Procuring Entity any

established dues under any other contract; or

vi. if the Bidder breaches any provision of the Code of Integrity

prescribed for Bidders in the Act and Chapter VI of the

Rules and this Bidding Document.

Notice of reasonable time will be given in case of forfeiture of

Performance Security. The decision of the Procuring Entity in

this regard shall be final.

8. Grievance Handling Procedure during Procurement Process (Appeals)

8.1 Grievance

Redressal

8.1.1 Any grievance of a Bidder pertaining to the procurement process

shall be by way of filing an appeal in accordance with the

provisions of Chapter III of the Act and Chapter VII of the Rules

and as given in Annexure- I of ITB to the First or Second

Appellate Authority, as the case may be, as specified below:

First Appellate Authority:- Chairman/Administrator, Rajasthan

Cooperative Dairy Federation Ltd. Jaipur.

Second Appellate Authority:- The Secretary/Principal Secretary/

Additional Chief Secretary, Department of Gopalan, Government

of Rajasthan, Jaipur.

8.2 Filing an appeal 8.2.1 If any Bidder or prospective Bidder is aggrieved that any decision,

action or omission of the Procuring Entity is in contravention to

the provisions of the Act or the Rules or the Guidelines issued

there under, he may file an appeal to First or Second Appellate

Authority, as the case may be, as may be designated for the

purpose, within a period of ten days from the date of such

decision, action, or omission, as the case may be, clearly giving

the specific ground or grounds on which he feels aggrieved.

8.2.2 Provided that after the declaration of a Bidder as successful in

terms of section 27 of the Act, the appeal may be filed only by a

Bidder who has participated in procurement proceedings.

8.2.3 Provided further that in case a Procuring Entity evaluates the

technical Bid before the opening of the financial Bid, an appeal

related to the matter of financial Bid may be filed only by a Bidder

whose technical Bid is found to be acceptable.

(Signed & Sealed by the tenderer 24 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

8.3 Appeal not to lie in

certain cases

8.3.1 No appeal shall lie against any decision of the Procuring Entity

relating to the following matters, namely:-

(a) Determination of need of procurement;

(b) Provisions limiting participation of Bidders in the

Bid process;

(c) The decision of whether or not to enter into negotiations;

(d) Cancellation of a procurement process;

(e) Applicability of the provisions of confidentiality.

8.4 Form of Appeal 8.4.1 An appeal shall be in the Annexure-I Form along with as many

copies as there are respondents in the appeal.

Every appeal shall be accompanied by an order appealed against,

if any, affidavit verifying the facts stated in the appeal and proof of

payment of fee.

Every appeal may be presented to First Appellate Authority or

Second Appellate Authority, as the case may be, in person or

through registered post or authorized representative.

8.5 Fee for filing

appeal

8.5.1 A. Fee for first appeal shall be rupees two thousand five

hundred and for second appeal shall be rupees ten

thousand, which shall be non-refundable.

B. The fee shall be paid in the form of bank demand draft

or banker‟s Cheque of a Scheduled Bank payable in the

name of Appellate Authority concerned.

8.6 Procedure for

disposal of appeals

8.6.1 1. The First Appellate Authority or Second Appellate Authority,

as the case may be, upon filing of appeal, shall issue notice

accompanied by copy of appeal, affidavit and documents, if

any, to the respondents and fix date of hearing.

8.6.2 2. On the date fixed for hearing, the First Appellate Authority or

Second Appellate Authority, as the case may be, shall -

i. Hear all the parties to appeal present before him; and

ii. Peruse or inspect documents, relevant records or copies

thereof relating to the matter.

3. After hearing the parties, perusal or inspection of documents

and relevant records or copies thereof relating to the matter,

the Appellate Authority concerned shall pass an order in

writing and provide the copy of order to the parties to appeal

free of cost.

4. The order passed under sub-clause above shall be placed on

the State Public Procurement Portal.

(Signed & Sealed by the tenderer 25 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Annexure-I

FORM No. 1

[See rule 83]

Memorandum of Appeal under the Rajasthan Transparency in Public Procurement

Act, 2012

Appeal No ………of ……………

Before the ………………………… (First / Second Appellate Authority)

1. Particulars of appellant:

(i) Name of the appellant:

(ii) Official address, if any:

(iii) Residential address:

2. Name and address of the respondent(s):

1.

2.

3.

3. Number and date of the order appealed against and name and designation of the

officer/authority who passed the order (enclose copy), or a statement of a decision, action

or omission of the Procuring Entity in contravention to the provisions of the Act by which

the appellant is aggrieved:

4. If the Appellant proposes to be represented by a representative, the name and postal

address of the representative:

5. Number of affidavits and documents enclosed with the appeal:

6. Grounds of appeal:

………………………………………………………………………………………………

………………………………………………………………………………………………

…………………………………………………………..... (Supported by an affidavit)

7. Prayer:

………………………………………………………………………………………………

……………………………………………………………………………………

Place …………………………………….

Date ……………………………………

Appellant's Signature

(Signed & Sealed by the tenderer 26 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Section II

BID DATA SHEET

(Signed & Sealed by the tenderer 27 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

BID DATA SHEET

1 FOR SUPPLY OF MILK PLASTIC HDPE CRATES OF ISI TYPE MINIMUM 1.5 KG

WEIGHT AND OF 168 MM HEIGHT EACH CRATE

1.1.1 The Procuring Entity :- Managing Director, Rajasthan Co-operative Dairy Federation Limited,

Jaipur-17.

1.1.2 Bids are invited for supply of the above mentioned goods to the Milk Unions/Units of RCDF

from bonafide manufacturers or their authorized suppliers on a rate contract basis for a period of

one year which may be further extended by another period of three months on the same terms &

conditions and price.

1.1.3 Price and/or purchase preference to local enterprises, if applicable, shall be given as per Finance

Department Notification SO165 dated 19.11.2015 under Rajasthan Transparency in Public

Procurement Act, 2012 (Act no. 21/2012) read with rule 33 of the Rajasthan Transparency in

Public Procurement Rules, 2013. In order to avail the same, bidders shall have to submit duly

filled and verified prescribed Form „A‟ and „B‟ with the technical bid in Tech-8.

1.1.4 The bidders are required to note that purchase orders released by the Milk Unions/Units within

the contract period and extended period, if any, i.e. the first day to the last day of the contract

period, including the extended period, if any, shall have to be executed by them, at the approved

rate.

2 Bidding Documents

2.1.1 The bidder shall be deemed to have carefully examined the specifications as given in the

bidding document. If any clarification is required contact General Manager (Purchase), RCDF,

Room No. 606, Floor No.6, Saras Sankul, JLN Marg, Jaipur-302017, Ph. No. 0141-2710209,

Mobile No. 09829500994 E-mail: [email protected]

2.2.1 A pre-bid conference will be held.

3 Preparation of Bids

3.1.1 The language of the bid is English and uploading documentation in Hindi/English is permitted.

3.2.1 Bid is required to be submitted in two parts :- technical bid and financial bid

3.3.1 Price of bidding document is Rs.1,000/- (Rs. One thousand only). Amount of bid security is

Rs.10,77,000/- (Rs. Ten lacs seventy seven thousand only). These must be in the form of two

separate bank demand draft/banker‟s cheque of a Scheduled Bank in India drawn in the name of

Managing Director, Rajasthan Co-operative Dairy Federation Limited, Jaipur payable at Jaipur.

Bid security can also be deposited through bank guarantee issued by a Scheduled Bank in India

in the specified given format valid for a period of six months from the bid submission

deadline date i.e. valid upto 10.09.2020. Tender processing fee is Rs. 1,000/- (Rs. One thousand only). This must be in the form of

demand draft in favour of MD, RISL payable at Jaipur.

These three original instruments shall be submitted personally or dropped in the Bid Box or

deposited in the office of General Manager (Purchase), RCDF, Saras Sankul, JLN Marg, Jaipur-

302017, by post in sealed envelopes before time and date of opening of technical bid, failing

which the bid shall be rejected. The number of Bank Draft/Bank Pay Order/Bank

Guarantee etc. to be mentioned on www.eproc.rajasthan.gov.in at respective columns.

3.4.1 The bidder shall submit with the its technical bid on www.eproc.rajasthan.gov.in website, the

following documents:-

Bid acceptance letter to be given on firm‟s letter head duly signed with seal in the format

given at Tech-1 is to be scanned and uploaded.

(Signed & Sealed by the tenderer 28 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Bidders organization details to be given on the firm‟s letter head duly signed with seal in

the format given at Tech-2 is to be scanned and uploaded.

Bidders work experience details to be given on the firm‟s letter head duly signed with

seal in the format given at Tech-3 is to be uploaded alongwith copies of purchase orders.

The statement of average annual turnover for past two years out of last three preceeding

financial years from Chartered Accountant with sign, seal and registration number and

UDIN number of C.A. is to be scanned and uploaded at Tech-3(i).

Declarations and Undertaking for installed manufacturing capacity is to be scanned and

uploaded at Tech-3(ii).

If manufacturer, please upload scanned copy of manufacturing licence, udyog aahdar

etc., if not, then manufacturer‟s authorization form duly signed with seal by the

manufacturer on the manufacturing firm‟s letter head in the format given at Tech-4 is to

be scanned and uploaded.

Upload scanned copy of GST Registration Certificate and PAN Card at Tech-8.

Upload scanned copy of cancelled cheque of Bank Account given for RTGS details at

Tech-8.

If bid security is being given in the form of Bank Guarantee, it may be given in the

format given at Tech-5. Declaration by the bidder in compliance of section 7 & 11 of the Act be given on the

firm‟s letter head duly signed with seal in the format given at Tech-6 is to be scanned

and uploaded.

Declaration of Authorization to sign on behalf of the Bidder in the form of Power of

Attorney/ Board Resolution/ Letter of Authorization written on stamp paper of

appropriate value and attested by notary be scanned and uploaded in the format given at

Tech-7.

Upload scanned copy of requisite, applicable, appropriate licences like BIS

Certificate/Agmark Certificate/Drug Licence etc. for the tendered item, if required at

Tech-8.

Bid Securing declaration given at Tech-9.

Note:- Scan/Photo copy of all documents being uploaded with the technical bid should be

self-attested.

3.5.1 The bidder shall submit the financial bid in the prescribed format in XLS. Sheet on

www.eproc.rajasthan.gov.in website.

Price list of HDPE Grade M60075 of Reliance Industries Ex-Jaipur Depot as on

01.02.2020, as issued by Reliance Industries Limited be enclosed in PDF format.

Broad details of costing mentioning the basic cost of material and the cost of conversion and

other costs separately be provided on a separate sheet to judge the reasonability of the prices in

PDF format.

3.6.1 Alternative bids are not permitted.

3.7.1 The terms of quoted price are F.O.R. all Milk Unions inclusive of all expenses and applicable

GST and taxes.

3.7.2 A common F.O.R. rate for all Milk Unions anywhere in Rajasthan must be offered against the

specified item as sought in the BOQ. Approval of rate will be for the item as a whole as

specified in specifications.

(Signed & Sealed by the tenderer 29 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

After issuance of letter of approval, RCDF at its sole discretion can delete or add any

destination/unit to the approved party. Quantity anticipated (which may vary substantially on

either side) is indicated in the Schedule-I of Schedule of Supply. RCDF can allot one or more

than one union to one or more than one supplier(s) at its sole discretion. It is pertinent to

mention that if bidder does not quote only one rate on FOR milk union anywhere in Rajasthan

basis and quotes rate for specific/particular milk union, the bid of such bidder shall become

liable for rejection at the sole discretion of RCDF.

3.7.3 The Goods & Service Tax and any other taxes as prevailing upto the last date of submission of

bid must be included in the net F.O.R. Rate. This however should be shown separately, so that

in the event of any change in the GST/tax by the Government (State or Central), the same will

be considered for increase/ decrease over the net F.O.R. rates.

3.8.1 The currency of bids is in Indian Rupees.

3.9.1 Bid validity period is 120 days.

3.10.1 The bid security shall be required in form of DD/Bank Guarantee or bid securing declaration (as

applicable).

3.10.2 Pre bid meeting to be held at RCDF Head Quarter Jaipur on 17.02.2020 at 11.30 AM.

4 Submission and opening of bids

4.1.1 The bid is to be submitted electronically on the website of www.eproc.rajasthan.gov.in.

4.2.1 The deadline of bid submission is date 11.03.2020 and time 3.00 PM.

4.3.1 The bid opening shall be at RCDF Hq., Room No. 605, Floor No. 6, Saras Sankul, JLN Marg,

Jaipur-302017 on 12.03.2020 and time 2.30 PM.

5 Evaluation and comparison of bids.

5.1.1 Bid evaluation and comparison shall be as per bid documents.

6 Award of contract

6.1.1 Quantity can be divided among more than one bidders (Parallel Rate Contract) at the price and

conditions of the lowest evaluated bid. The federation may also execute parallel rate contract to

with more than one firm for each item on the lowest approved rates on the same terms &

conditions, if the original lowest one each not in a position to supply material as per federation‟s

requirements or when it is considered that the material is of critical and vital nature and it is

necessary to have more than one supplier for operational flexibility.

when it is considered that the quantity of the subject matter of procurement to be

procured is very large and it may not be in the capacity of the bidder, whose bid is

accepted, to deliver the entire quantity or when it is considered that the subject matter of

procurement to be procured is of critical and vital nature, in such cases, the quantity may

be divided between the bidder, whose bid is accepted and the second lowest bidder or even

more bidders in that order, in a fair, transparent and equitable manner at the rates of the

bidder, whose bid is accepted. Counter offer to first lowest bidder (L1), in order to arrive

at an acceptable price, shall amount to negotiation. However, any counter offer thereafter

to second lowest bidder (L2), third lowest bidder (L3) etc., (at the rates accepted by L1) in

case of splitting of quantities, as pre- disclosed in the bidding documents, shall not be

deemed to be a negotiation.

RCDF reserves the right to select one or more firms for supply of bid item(s) looking to the

critical and vital nature, operational flexibility, consistent and regular supplies. RCDF also

reserves the right to allocate quantities in the ratio it deems appropriate with higher weightage to

the qualified lowest bidder. Such ratio could be 65:35 - higher/greater part being that for the

lowest.

(Signed & Sealed by the tenderer 30 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

6.2.1 The contract agreement is valid for one year, further extendable for three months at same

rate and terms & conditions.

6.3.1 The performance security amount required to be deposited is 5% of the contract value.

The performance security upto Rs.10,00,000/- must be furnished in the form of either

Bankers Cheque/Pay order/Bank Draft issued by a scheduled bank in India. If amount of

performance security is more than Rs.10,00,000/-, the bidder/ supplier shall furnish

performance security in form of Bankers Cheque/Pay order/Bank Draft upto

Rs.10,00,000/- and above Rs.10,00,000/- can be furnished in the Bank Guarantee. The

validity period of BG shall be of 18 months from the date of issuance of Rate Approval

Letter.

7 Grievance handling procedure during Procurement Process

7.1.1 The Designation and complete Address of First Appellate Authority is Chairman/Administrator,

RCDF, Jaipur.

7.2.1 (b) The Designation and complete Address of Second Appellate Authority is Secretary/

Principal Secretary/ Additional Chief Secretary, Gopalan Department, GOR, Secretariat, Jaipur.

(Signed & Sealed by the tenderer 31 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Section III

Qualification and Evaluation Criteria

(Signed & Sealed by the tenderer 32 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Section III

Section III: Qualification and Evaluation Criteria

I. The Bidder must be an experienced manufacturer or authorized by him for supplying the

subject matter of goods.

II. The bidder shall be considered eligible only if the bidder‟s average annual financial

turnover in the same name and style during the last two years out of last three preceding

financial years i.e. 2016-17, 2017-18 and 2018-19 (turnover for the year 2018-19 may

also be considered, if the accounts are audited and certified by C.A. otherwise shall not be

considered) shall not be less than the 50% of the estimated value of quantity. The

statement of average annual turnover from Chartered Accountant with sign, seal and

registration number should be scanned and uploaded in Tech-3(i) with bid.

III. The bidder shall be considered eligible only if the bidder possesses experience of supply

of item of similar nature, worth more than 25% of the value of the work being sought by

the bidder in the preceding two financial years, cumulatively. Copies of purchase orders

of the same should be enclosed by the bidders with the bid to establish the same.

IV. The Bidder must not have been debarred by the State Government or Rajasthan

cooperative Dairy Federation Ltd. or blacklisted by any other procuring entity.

V. The Bidder must have PAN number and GST number.

VI. All the details/documents which have been sought must be scanned/uploaded.

VII. The offers of the bidders who do not fulfill the above criterion may not be considered.

VIII. The successful Bidder will be one who fully agrees to comply with all the terms and

conditions of this Bid document without any omission, deviation and reservation and

possesses the required qualifications and experience and whose financial bid is evaluated

as the lowest by Rajasthan Cooperative Dairy Federation Ltd.

(Signed & Sealed by the tenderer 33 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Section IV :

Schedule of Supply

(Signed & Sealed by the tenderer 34 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Schedule-I

APPROX. REQUIREMENT OF RATE CONTRACT FOR MILK

PLASTIC HDPE CRATES OF ISI TYPE MINIMUM 1.5 KG

WEIGHT AND OF 168 MM HEIGHT EACH CRATE (IN NOS)

FOR RATE CONTRACT

S. No. UNION/UNIT

Milk Plastic HDPE Crate of

ISI Type minimum 1.5 kg.

Weight and of 168 mm

height each crate (In Nos.)

1 AJMER 25000

2 ALWAR 16000

3 BHILWARA 20000

4 BIKANER 1200

6 BHARATPUR 2000

7 CHITTORGARH 30000

8 CHURU 2400

9 HANUMANGARH 10000

10 JAIPUR 125000

11 JODHPUR 2000

12 KOTA 3000

13 NAGOUR 3000

14 PALI 3000

15 RANIWARA 6000

16 SIKAR 5000

17 TONK 2000

18 UDAIPUR 22000

19 SAWAI MADHOPUR 3000

20 JHALAWAR 3000

TOTAL 283600

Quantities mentioned above may vary substantially on either side.

(Signed & Sealed by the tenderer 35 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Schedule-II

Delivery and Completion Schedule

1. Supplies are required to be made direct to the various Unions/Units of RCDF

within one month from the date of dispatch of orders or as settled with the bidder

or as provided in acceptance of bid and letter of approval, for all the purchase

orders being placed on the supplier.

2. The above period of execution will be counted from the date of dispatch of orders.

Liquidated damages will be recovered for the days in excess of the period

prescribed for supply as specified in General Conditions of Contract. It will also be

open to the Purchasing Officers to return the goods which are delivered later than

the stipulated period and effect risk purchase in such cases or in case it is found

that the goods received are not as per the prescribed specification.

3. Submission of contract completion report:

i. A consolidated statement (Schedule-V) shall be submitted to MD, RCDF

and MD of respective Milk Union by the 10th of each month. Every time

the statement should contain details of all orders placed under the contract

by the contract holder.

ii. Firms will have to submit consolidated statement (Schedule-VI) in

duplicate at the end of rate contract as well as after expiry of guarantee

period of rate contract (as provided in guarantee clause of the contract) to

enable the RCDF to examine the case for refund of performance security.

(Signed & Sealed by the tenderer 36 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Schedule-III

Technical Specifications

(Signed & Sealed by the tenderer 37 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Schedule-IV

Inspections and Tests

It is necessary for suppliers to maintain quality of the materials supplied as per the

prescribed standards and specifications.

Milk Unions will get the quality of materials tested at their own laboratory or through

the Central Quality Control Lab (CQCL) at RCDF, Jaipur.

(Signed & Sealed by the tenderer 38 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Schedule-V

(On Firm's letter head)

To,

Managing Director,

Rajasthan Co-operative Dairy Federation Ltd.,

Saras Sankul, JLN Marg,

Jaipur-302017

Telephone no. 0141-2710209

E-mail : [email protected], [email protected]

Subject: - Regarding submission of Monthly Supply Status (to be submitted by the

10th

of each month)

NAME OF FIRM:

CONTRACT NO & DATE

NAME OF ITEM

S. No.

Supply Order Stipulated

date of

completion

of supplies

(Delivery

Period)

(In Days)

Actual Supply Quantity Remained

unsupplied

Remarks No.

&

Date

Consignee/

M.U./Units

name

Qty.

(in

unit)

Amt.

(Rs.)

Actual

date of

receipt

Quantity

(in unit)

Quantity

(in unit) Reasons

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

2.

(SIGNATURE & SEAL OF FIRM)

NOTE:-

1. Column no. 1 to 11 is to be filled in by firm and shall be submitted to MD, RCDF,

Jaipur.

2. The information filled in by firm shall be correct, complete and factual.

3. Attach separate sheets as annexure, whenever necessary.

Copy to:-

1. Respective Milk Union by e-mail. MD, Milk Union will submit the above

information to RCDF after verification of same from the record.

(Signed & Sealed by the tenderer 39 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Schedule-VI

(On Firm's letter head)

To,

Managing Director,

Rajasthan Co-operative Dairy Federation Ltd.,

Saras Sankul, JLN Marg,

Jaipur-302017

Telephone no. 0141-2710209

E-mail : [email protected], [email protected]

Subject: - Regarding submission of Consolidated Contract Completion Report

NAME OF FIRM:

CONTRACT NO & DATE

NAME OF ITEM

S. No.

Supply Order Stipulated

date of

completion

of supplies

(Delivery

Period)

(In Days)

Actual Supply Quantity Remained

unsupplied

Remarks No.

&

Date

Consignee/

M.U./Units

name

Qty.

(in

unit)

Amt.

(Rs.)

Actual

date of

receipt

Quantity

(in unit)

Quantity

(in unit) Reasons

1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

2.

(SIGNATURE & SEAL OF FIRM)

NOTE:-

1. Column no. 1 to 11 is to be filled in by firm and shall be submitted to MD, RCDF,

Jaipur.

2. The information filled in by firm shall be correct, complete and factual.

3. Attach separate sheets as annexure, whenever necessary.

Copy to:-

1. Respective Milk Union by e-mail. MD, Milk Union will submit the above

information to RCDF after verification of same from the record.

(Signed & Sealed by the tenderer 40 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Section V : Bidding Forms

(Signed & Sealed by the tenderer 41 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Technical Proposal (Bid)

(Signed & Sealed by the tenderer 42 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-1

BID ACCEPTANCE LETTER

(To be given on Company Letter Head)

To,

Managing Director,

Rajasthan Co-operative Dairy Federation Ltd.,

Saras Sankul, JLN Marg, Jaipur -302017

Sub: Acceptance of Terms & Conditions of Bid.

NIB No.__________________________

Tender ID No. ________________________________

Name of Tender / Work / Item __________________________________________

Dear Sir,

We, the undersigned, declare that:

1. I / We have downloaded the bid documents for the above mentioned bid.

2. I/ We have examined and have no reservations to the entire Bidding Document,

including Addenda and I / We shall abide by the same.

3. I / We hereby unconditionally agree & accept the terms &conditions of above

mentioned bidding document in its totality / entirety.

4. I/ We declare that we fulfill the eligibility and qualification criteria in conformity

with the Bidding Document and offer to supply in accordance with the

specifications, the delivery schedule and other requirements as specified in the

bidding document.

5. Our Bid shall be valid for a period of 120 days from the date fixed for the bid

submission deadline in accordance with the Bidding Document, and it shall remain

binding upon us and may be accepted at any time before the expiration of that

period.

6. If our Bid is accepted, we commit to submit a Performance Security of the

amount of 5% (Five percent) of the Contract Price or shall submit the Performance

Security Declaration, as the case may be, for the due performance of the Contract.

7. I/ We are not participating as Bidder in more than one Bid for supply of the subject

Goods in this bidding process.

8. Our firm/or the firm authorizing us for the supply of subject goods has not been

debarred by the State Government or the Procuring Entity or a regulatory authority

under any applicable law.

(Signed & Sealed by the tenderer 43 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

9. I/ We understand that this Bid, together with your written acceptance thereof

included in your notification of award, shall constitute a binding contract between

us, until a formal Contract is prepared and executed.

10. We understand that you are not bound to accept the lowest evaluated bid or any

other bid that you may receive.

11. I/ We declare that we have complied with and shall continue to comply with the

provisions of the Code of Integrity including Conflict of Interest as specified for

Bidders in the Rajasthan Transparency in Public Procurement Act, 2012, the

Rajasthan Transparency in Public Procurement Rules, 2013 and this Bidding

Document during the procurement process and execution of the Contract till

completion of all our obligations under the Contract.

12. In case any provisions of the bidding document are found violated or breached then

procuring entity shall without prejudice to any other legal right or remedy be at liberty

to reject this bid including the forfeiture of the full bid security amount absolutely.

Yours Faithfully,

Name: ____________________________________________

In the capacity of: ________________________________________

Signed: ______________________

Date: ___________________

Duly authorized to sign the Bid for and on behalf of: __________________

Complete Address ______________________________________

Tel: ___________________ Fax: _________________ E-mail: _______________

(Signed & Sealed by the tenderer 44 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-2

BIDDER’S ORGANIZATION DETAILS

PORFORMA TO BE SUBMITTED ON THE FIRM‟S LETTER HEAD

The following information is very essential and must be filled in very carefully, legibly

and complete to all the points:

1. Name of Contact Person with designation

& his mobile numbers

2. Complete correspondence address of Firm

3. Telephone No.

4. Fax No.

5. E-mail address

6. Manufacturing License No. & Date

7. Udyog Aadhar No. & Date

8. PAN no. of proprietor/partnership firm

/company etc.

9.

Capacity in which tender has been

submitted proprietor/partnership firm

/company etc.

10.

Is the bidder a manufacturer, if yes,

please mention the same. If not, then the

manufacturer who has authorized should

be indicated.

11.

The total value of purchase orders

successfully completed in last two

financial years i.e. 2017-18 and 2018-19.

Details of the same and copies to be

enclosed as per Tech-3.

12.

The total value of current supply orders

(in financial year 2019-20) in hand, if

any. Details of the same and copies to be

enclosed as per Tech-3.

13.

Year wise sales/income from operations/

turnover as per manufacturing & trading

account and balance sheet for the last two

years (any two years out of the preceding

three financial years), as certified/

verified by the Chartered Accountant with

UDIN of C.A.

Year Turnover (Rs. in lacs)

2016-17

2017-18

2018-19 (If

audited)

(Signed & Sealed by the tenderer 45 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

14. GST No. & Date

15.

Bid acceptance letter given in the

enclosed format given at Tech-1.

(Yes/No)

16. Installed capacity of the Plant per month

17.

Whether your Plant is capable of

manufacturing and printing the bid item

as per specifications of tender

18.

Details of RTGS: (Please upload a

photocopy of a cancelled cheque of this

account for confirmation).

Bank Name

Branch Name

RTGS / IFSC Code

Account Number

19. Information regarding current litigation /

past debarment / black listing, if any.

20.

Detail of Demand Draft‟s

Particular Name of Bank and

Branch

DD No. DD

Date

Amount

Tender

Processing

Fees

Tender Fees

Bid Security

(Signed & Sealed by the tenderer 46 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-3

BIDDER’S EXPERIENCE DETAILS

1. Details of purchase orders received in preceding two financial years and the

current supply orders in hand may please be summarized chronologically in the

given format and copies of the same may be scanned and uploaded.

Details of Purchase Orders of preceding two financial years i.e. 2017-18 and

2018-19.

S.

No.

P.O. Number

and Date

Issued By /

Name of Buyer

Name of

the item

Amount

(Rs./P.) Page No.

1.

2.

3.

4.

TOTAL

Details of Current Purchase Orders/Purchase Orders in hand (Financial year

2019-20).

S.

No.

P.O. Number

and Date

Issued By /

Name of Buyer

Name of

the item

Amount

(Rs./P.) Page No.

1.

r2.

3.

4.

TOTAL

(Signed & Sealed by the tenderer 47 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

FORM TECH-3 (i)

(On Firm's letter head)

Annual turn over statement

The Average Annual Turnover of M/s..........................(Name of Firm).................... and

address ........................... for the past two years are given below and certified that the

statement is true and correct:-

Sl. NO. Financial Years Turnover in Lakhs (Rs)

1. 2016-17 -

2. 2017-18 -

3. 2018-19 -

Total - Rs. _____________ Lakhs

Average annual turnover - Rs. _____________ Lakhs

Note:- Turn over for the year 2018-19 may also be considered, if the accounts are audited

and certified by C.A. otherwise shall not be considered.

Date Signature of the bidder Signature of

Auditor/Seal Chartered Accountant

(Name & Address.)

Reg. No.

Tel. No.

Mob. No.

UDIN:

(Signed & Sealed by the tenderer 48 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-3(ii)

(On firm's letter head)

Declarations and Undertaking

We....................................................... (Name of firm) do hereby declare that we have

installed manufacturing capacity of quoted item in specified units in the bid as detailed

below:-

S.

No.

Quoted item

details &

code no.

Monthly

capacity in

all shifts`

( in nos.)

Annual

production

capacity

(in nos.)

Monthly

supply

commitment

to RCDF (in

nos.)

Annual supply

commitment to

RCDF

(in nos.)

1 2 3 4 5 6

1

2

3

Place :

Date :

Signature of Authorized Signatory

Name and Signature of Bidder

Designation with seal

(Signed & Sealed by the tenderer 49 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-4

MANUFACTURER’S AUTHORIZATION FORM

No.__________________________________Dated_________________________

MANAGING DIRECTOR,

RAJASTHAN CO-OPERATIVE DAIRY FEDERATION

“SARAS SANKUL”, J.L.N. MARG,

JAIPUR – 302 017.

Sub : - Tender reference No._____________________________________.

Dear Sir,

We________________________________________ an established and reputable

manufacturers of ___________________________having factories at

________________ and ____________do hereby authorize

M/s.____________________________ (Name and address of Agents) to bid, negotiate

and conclude the contract with you against tender reference

No._________________________for the above said goods manufactured by us.

No company or firm or individual other than M/s._____________________ are

authorize to bid, negotiate and conclude the contract in regard to this business against this

specific tender.

We hereby extend our full guarantee and warranty for the goods offered for supply

against your tender.

Yours faithfully,

(NAME)

for and on behalf of M/s.

(Name of Manufacturers)

Note : This letter of authority should be on the Letter Head of the manufacturing concern

and should be signed by a person competent and having the power of attorney to bind the

manufacturer.

(Signed & Sealed by the tenderer 50 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-5

Bid Security in form of Bank Guarantee

[To be issued by a Scheduled Bank in India and must be duly stamped]

[insert Bank’s Name, and Address of Issuing Branch or Office]

Beneficiary:

The Managing Director

Rajasthan Cooperative Dairy Federation Ltd,

Saras Sankul, JLN Marg, Jaipur-302017 Rajasthan Date: [insert date]

BID GUARANTEE No.: [insert number]

We have been informed that [insert name of the Bidder] (hereinafter called "the

Bidder") has submitted to you its Bid dated [insert date] (hereinafter called "the Bid")for

the supply of ____________________________to our milk unions under Bid No.

[insert BID number].Furthermore, we understand that, according to your conditions, Bid

must be supported by a Bid Security.

At the request of the Bidder, we [insert name of Bank] hereby irrevocably undertake to

pay you any sum or sums not exceeding in total an amount of [insert amount in

figures][insert amount in words] upon receipt by us of your first demand in writing

accompanied by a written statement stating that the Bidder is in breach of its obligation(s)

under the Bid/Tender conditions, because the Bidder:

(a) has withdrawn its Bid/Tender during the period of Bid validity specified by the

Bidder in the Form of Bid; or

(b) having been notified of the acceptance of its Bid by the Rajasthan Cooperative

Dairy Federation Ltd, Jaipur during the period of Bid/Tender validity,

(i) fails or refuses to execute the Contract Form, if required,

(ii) fails or refuses to furnish the performance security, in accordance with the

Instructions to Bidders (ITB),

(iii) does not accept the correction of errors in accordance with the ITB, or

(iv) breaches any provision of the Code of Integrity specified in ITB;

This guarantee will expire: (a) if the Bidder is the successful Bidder, upon our receipt of

copies of the contract signed by the Bidder and the performance security issued to you

upon the instruction of the Bidder; and (b) if the Bidder is not the successful Bidder, upon

(Signed & Sealed by the tenderer 51 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

the earlier of (i) our receipt of a copy your notification to the Bidder of the name of the

successful Bidder; or (ii) 180 days after the expiration of the Bidder‟s Bid/Tender.

Consequently, any demand for payment under this guarantee must be received by us at

the office on or before that date.

The Guarantor has power to issue this guarantee and discharge the obligations

contemplated herein, and the undersigned is duly authorized to execute this Guarantee

pursuant to the power granted under ______________.

Name _

In the capacity of _

Signed _

Duly authorized to sign the Bid Security for and on behalf of _

Date _

Bank‟s Seal __________________________________________ of Bid Security

(Signed & Sealed by the tenderer 52 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

FORM TECH-6

(To be given on the firm‟s letter head duly sealed & signed)

Declaration by the Bidder in compliance of Section 7 & 11 of the

Act

_________________________________________________________

Declaration by the Bidder

In relation to our Bid/Tender submitted to Managing Director, Rajasthan Cooperative

Dairy Federation Ltd. Saras Sankul JLN Marg, Jaipur-302017, Rajasthan for

procurement of __________________________ to be supplied to your milk unions. In

response to their Bid/Tender No…………… Dated ………….. we hereby declare

under Section 7 and 11 of the Rajasthan Transparency in Public Procurement Act,

2012, that;

1. We possess the necessary professional, technical, financial and managerial

resources and competence required by the Bidding Document issued by the

Rajasthan Cooperative Dairy Federation Ltd.

2. We have fulfilled our obligation to pay such of the taxes payable to the Central

Government or the State Government or any local authority, as specified in the

Bidding Document;

3. We are not insolvent, in receivership, bankrupt or being wound up, not have our

affairs administered by a court or a judicial officer, not have our business

activities suspended and are not the subject of legal proceedings for any of the

foregoing reasons;

4. We do not have, and our directors and officers not have, been convicted of any

criminal offence related to our professional conduct or the making of false

statements or misrepresentations as to our qualifications to enter into a

procurement contract within a period of three years preceding the

commencement of this procurement process, or not have been otherwise

disqualified pursuant to debarment proceedings;

(Signed & Sealed by the tenderer 53 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

5. We do not have a conflict of interest as specified in the Rajasthan Transparency

in Public Procurement Act, the Rajasthan Transparency in Public Procurement

Rules and this Bidding Document, which materially affects fair competition;

6. We have complied and shall continue to comply with the Code of Integrity as

specified in the Rajasthan Transparency in Public Procurement Act, the

Rajasthan Transparency in Public Procurement Rules and this Bidding

Document, till completion of all our obligations under the Contract.

Date: Signature of Bidder/Tenderer

Place: Name :

Designation:

Address:

(Signed & Sealed by the tenderer 54 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

FORM TECH-7

POWER OF ATTORNEY

(On Stamp paper of appropriate value and attested by notary)

Know all men by these presents, we..........................................................(name and

address of the registered office) do hereby constitute, appoint and authorise Mr /

Ms........................……… ……............(name and residential address) who is presently

employed with us and holding the position of .................................................... as our

attorney, to do in our name and on our behalf, all such acts, deeds and things necessary

in connection with or incidental to our Bid for selection as Bidder for supply of

__________________________ to your milk unions, including signing and

submission of all documents and providing information/responses to RAJASTHAN

COOPERATIVE DAIRY FEDERATION LTD., JAIPUR in all matters in connection

with our bid for the said assignment.

We hereby agree to ratify all acts, deeds and things lawfully done by our said attorney

pursuant to this Power of Attorney and that all acts, deeds and things done by our

aforesaid attorney shall and shall always be deemed to have been done by us.

Dated this the Day of Acceptance

For ……………………………………………………… Name & signature

(Name and designation of the person(s) signing on behalf of the Applicant)

(Signed & Sealed by the tenderer 55 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-8

Scan and upload Chartered Accountant certificate for turnover,

GST Certificate, IT Return and Cancelled Cheque

1. The statement of average annual turnover for past two years out of three

preceding financial years from Chartered Accountant with sign, seal and

registration number and UDIN number of Chartered Accountant is to be

scanned and uploaded at Tech-3(i).

2. Declarations and Undertaking for installed manufacturing capacity Tech-3(ii).

3. Copy of GST Registration Certificate and PAN Card is to be scanned and

uploaded.

4. Copy of cancelled cheque of Bank Account given for RTGS details is to be

scanned and uploaded.

5. Copy of requisite, applicable, appropriate licences like BIS

Certificate/Agmark Certificate/Drug Licence etc. for the tendered item, if

required are to be scanned and uploaded.

6. Price and/or purchase preference to local enterprises, if applicable, shall be

given as per Finance Department Notification SO165 dated 19.11.2015 under

Rajasthan Transparency in Public Procurement Act, 2012 (Act no. 21/2012)

read with rule 33 of the Rajasthan Transparency in Public Procurement Rules,

2013. In order to avail the same, bidders shall have to submit duly filled and

verified prescribed Form „A‟ and „B‟ with the technical bid in tech-8.

(Signed & Sealed by the tenderer 56 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Form TECH-9

Form of Bid Securing Declaration

(Note :- Applicable only for Govt. Deptt. and Govt. Enterprises)

Date: [insert date (as day, month and year)]

Bid No.: [insert number of bidding process]

To:

Managing Director,

Rajasthan Co-Operative Dairy Federation Ltd.,

Saras Sankul, JLN Marg, Jaipur-302017

Phone No. : 0141-2702535, 2702501-508

Email ID : [email protected]

We, the undersigned, declare that:

We understand that, according to your conditions, bids must be supported by a Bid-Securing

Declaration.

We accept that we will automatically be suspended from being eligible for bidding in any

contract with you, Managing Director, Rajasthan Co-Operative Dairy Federation Ltd., Saras

Sankul, JLN Marg, Jaipur-302017, for the period of time of 36 months starting on date

......................, if we are in breach of our obligation(s) under the bid conditions, more

specifically, if we:

(a) withdraw or modify our Bid after deadline for submission of bids, during the period of bid

validity specified in the Bid Data Sheet (hereinafter “the BDS”); or

(b) having been notified during the period of bid validity specified in the BDS, about the

acceptance of our Bid by you,

(i) fail or refuse to execute the Contract Agreement within the time period specified in the

BDS,

(ii) fail or refuse to furnish the performance security, in accordance with the Instructions to

Bidders (hereinafter “the ITB”) within the time period specified in the BDS,

(c) not accept the correction of arithmetical errors in accordance with the ITB; or

(d) breach a provision of the Code of Integrity specified in the RTPP Act, RTPP Rules and the

ITB.

(Signed & Sealed by the tenderer 57 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

We understand this Bid-Securing Declaration shall expire if we are not the successful Bidder,

upon the earlier of (i) our receipt of your notification to us of the name of the successful Bidder;

or (ii) thirty days after the expiration of our Bid.

Signed: ____________________________________________________

[insert signature of person whose name and capacity are shown]

Name: _____________________________________________________

[insert complete name of person signing the Bid-Securing Declaration]

In the capacity of: ___________________________________________

[insert legal capacity of person signing the Bid-Securing Declaration]

Duly authorized to sign the bid for and on behalf of: __________________

[insert complete name and address of the Bidder]

Dated on day of ,

[insert date of signing]

Corporate Seal _______________________________

[affix corporate seal of the bidder]

[Note: In case of a Joint Venture, the Bid-Securing Declaration must be in the name of all

partners to the Joint Venture that submits the bid.]

(Signed & Sealed by the tenderer 58 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Financial Proposal (Bid)

(Signed & Sealed by the tenderer 59 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

FORM FIN-1

FINANCIAL PROPOSAL SUBMISSION FORM

RATE STATEMENT

(To be submitted in Financial bid envelop only)

PURELY INDICATIVE FOR E-BIDS AS THE RATES ARE REQUIRED

TO BE FILLED ON THESE LINES IN THE PRESCRIBED BOQ IN .XLS

FORMAT

FOR MILK PLASTIC HDPE CRATES OF ISI TYPE MINIMUM 1.5 KG

WEIGHT AND OF 168 MM HEIGHT EACH CRATE

Bidder must quote the rates in the statement given below in the prescribed BOQ, in .XLS

format (Rates are not to be quoted here).

S. No. Particulars

Rate Rs. per Milk Plastic

HDPE Crate of ISI Type

minimum 1.5 kg. Weight

and of 168 mm height

each crate

1.

F.O.R. all Milk Unions price inclusive of all

expenses (Rate Rs. per Milk Plastic HDPE Crate

of ISI Type minimum 1.5 kg. Weight and of 168

mm height each crate)

2.

GST (Rate Rs. per Milk Plastic HDPE Crate of ISI

Type minimum 1.5 kg. Weight and of 168 mm

height each crate)

3*.

F.O.R. all Milk Union price for consideration in

Tender inclusive of all taxes (GST)/

duties/expenses (Rate Rs. per Milk Plastic HDPE

Crate of ISI Type minimum 1.5 kg. Weight and of

168 mm height each crate)

In words_Rs.__________________

NOTE:

1. * The F.O.R. all Milk Unions rates indicated at Sl.No.3 includes all taxes & expenses

even if not explicitly mentioned here but in vogue/applicable on the last date of

submission of tenders, for supply anywhere in Rajasthan.

2. Bidder should quote their rate in the Rate Statement Proforma only.

3. The conditional offer which effect the rate of the quoted item shall be liable for

rejection even the quoted rate is lowest.

(Signed & Sealed by the tenderer 60 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

4. Price list of HDPE Grade M60075 of Reliance Industries Ex-Jaipur Depot as on

01.02.2020, as issued by Reliance Industries Limited be enclosed in PDF format.

5. Broad details of costing mentioning the cost of material and the cost of conversion and

other costs separately be provided on a separate sheet to judge the reasonability of the

prices in PDF format.

6. Price of raw material as on 01.02.2020.

a) For Milk Plastic HDPE Crate of ISI Type minimum 1.5 kg. Weight and of 168

mm height each crate, HDPE Grade M60075 of Reliance Industries Rate : Ex-

Jaipur Depot (Exclusive of GST & taxes)

b) Authentic price list of Reliance Industries as applicable as on 01.02.2020 must be

submitted alongwith bid.

7. Conversion charges to finished products.

8. Any other expenditure involved.

9. The tenderer should provide broad details of the costing of the item quoted in order to

judge the reasonability of the prices. Necessary documents in support of the cost

parameter considered should also be provided. This must be given on separate sheet.

10. Broad details of costing mentioning the cost of material and the cost of conversion and

other costs separately be provided on a separate sheet to judge the reasonability of the

prices in PDF format.

S.

No. Particulars

Rate Rs. per Milk Plastic

HDPE Crate of ISI Type

minimum 1.5 kg. Weight and

of 168 mm height each crate

1.

Total raw material cost upto the stage of finished goods

(Rate Rs. per Milk Plastic HDPE Crate of ISI Type

minimum 1.5 kg. Weight and of 168 mm height each crate)

1. Please specify the grade of the raw material and supplier

name. Like Reliance etc. (HDPE grade M60075)

2. The authentic price list of applicable raw material as on

01.02.2020 of Ex-Jaipur Depot must be submitted

alongwith bid.

2.

Total other cost (Rate Rs. per Milk Plastic HDPE Crate of

ISI Type minimum 1.5 kg. Weight and of 168 mm height

each crate)

3.

F.O.R. milk union price with all expenses excluding GST/

taxes (Rate Rs. per Milk Plastic HDPE Crate of ISI Type

minimum 1.5 kg. Weight and of 168 mm height each crate)

4.

F.O.R. milk union price including all expenses, GST &

taxes (Rate Rs. per Milk Plastic HDPE Crate of ISI Type

minimum 1.5 kg. Weight and of 168 mm height each crate)

(Signed & Sealed by the tenderer 61 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

SECTION VI (A)

GENERAL AND SPECIAL CONDITIONS OF

CONTRACT

(Signed & Sealed by the tenderer 62 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

General and Special Conditions of Contract

S. No. Particulars

1 The rate must be offered against the specified packing item. The rates quoted should

remain open (valid for acceptance) for a minimum period of 120 days from the date of

bid submission deadline date. GST and any other type of duties/taxes as prevailing up to

the last date of submission of rates must be included in the net F.O.R. rate (F.O.R. all

Milk Unions anywhere in Rajasthan). These, however should be shown separately, so

that in the event of any change in these charges by the Government (State or Central),

the same will be considered for increase/decrease over the net F.O.R. rates. However,

the increased GST due to change in slab on higher turnover, if any shall be payable

by the bidder.

2 Rate must be offered for supply of the subject goods to the Milk Unions/Units of RCDF

from bonafide manufacturers or their authorized suppliers on a rate contract for a period

of one year which may be further extended by another period of three months on the

same terms & conditions and prices.

3 The bidders are required to note that purchase orders released by the Milk Unions/Units

within the contract period and extended period, if any, i.e. the first day to the last day of

the contract period, including the extended period, if any, shall have to be executed by

them, at the approved rate.

4 Successful bidders/Suppliers are required to make supplies within one month from the

date of dispatch of orders by the various Unions/Units of RCDF or as specified in the

purchase order.

5 The supplier will supply the bid items within one month‟s period from the date of

placement of the order by the Milk Unions or as settled with the bidder or as provided in

the acceptance of bid. In case supplier fails to supply and deliver the bid item within the

prescribed time as mentioned in the order, the RCDF reserves the right to effect risk

purchases from other source on the supplier‟s risk and cost. Milk Unions/RCDF also

reserves the absolute right as to the method adopted for effecting such risk purchases.

The extra expenditure incurred in making risk purchases shall be recovered from the

supplier‟s due payments/performance security lying with any Plant/Milk Union/RCDF

notwithstanding whether such amount(s) pertain to current and/or previous contract(s).

In case risk purchases are not effected for any reasons and approved supplier supplies the

goods beyond the prescribed time i.e. after expiry of the scheduled time and if such

delayed supplies are accepted by the Milk Unions such late receipt of goods shall be

subject to liquidated damages(LD)/penalties at following rates :-

If the delay is less than one week beyond the scheduled period of supply then a LD/

penalty of 1% will be imposed.

If the delay is more than one week but less than two weeks, LD/ penalty @ 2% will be

imposed.

If the delay is more than two weeks but less than three weeks, LD/ penalty @ 3% will be

imposed.

If the delay is more than three weeks but less than four weeks, LD/ penalty @ 4% will be

imposed.

(Signed & Sealed by the tenderer 63 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

If the delay is more than four weeks, LD/ penalty @ 5% will be imposed.

However, in case of persistent delay in the supply of material by the bidder, the rate

contract may be cancelled and security forfeited by the Federation.

The Federation/Milk Unions reserves the right to reject the supplied goods or to accept

the related supplies if it so desire by imposing deduction to a maximum of 5% in case of

delays beyond one month as stipulated above.

The Federation/Milk Unions further reserves the right to extend the period of supply in

case a request in time giving full justification for the causes or factors leading to delay

are reported by the supplier before the expiry of the delivery period.

6 Any correspondence made by the RCDF/milk union at the address/e-mail given by the

bidder shall be deemed to have been delivered to the party. Any change in the address

thereafter must be communicated in writing to the Managing Director, Rajasthan Co-

operative Dairy Federation Ltd., Jaipur and the concerned milk unions.

7 It is necessary for suppliers to maintain quality of the materials supplied as per the

prescribed standards and specifications. Various Milk Unions/Cattle Feed Plants get the

quality of materials supplied by various firms tested at the Milk Unions/CFP‟s

laboratories or through the Central Quality Control Lab (CQCL) at RCDF, Jaipur.

8 RCDF reserves the right to select one or more firms for supply of bid item(s)for

operational flexibility, consistent and regular supplies etc., at the rates of the qualified

lowest. RCDF also reserves the right to allocate quantities in the ratio it deems

appropriate with higher weightage to the qualified lowest bidder. Such ratio could be

65:35 - higher/greater part being that for the lowest. RCDF may decide to allot lower

quantities to bidders whose supplies as approved suppliers have not been consistently

found to be conforming to the quality/service and specifications during the past

contracts.

9 The specifications, conditions, schedules, drawing of the bidding document constitute an

integral part of the bid.

In the case of substantial non-conformity with the specifications or if it contains any

inadmissible reservations seen or otherwise, in contravention to the spirit and letter of

the bid documents such bids shall be summarily rejected.

10 The successful bidders will have to execute a contract in prescribed form with Rajasthan

Cooperative Dairy Federation Ltd; Jaipur and deposit performance security as mentioned

below for the performance of the contract immediately after the acceptance of the bid is

communicated to the party.

The performance security will be refunded if otherwise found to be qualifying for refund

within six months from the date of expiry of contract. No interest will be paid by the

RCDF on such security amount. In case of breach of any terms and conditions of the

contract or on unsatisfactory performance of the contract the RCDF shall have an

absolute right of being compensated through liquidated damages/Penalties and the

amount of performance security shall also, in such an event, be liable to forfeiture in full

or part for being appropriate towards aforesaid liquidated damages/penalties and the

(Signed & Sealed by the tenderer 64 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

decision of MD RCDF shall be final in this regard. If the bidder fails to deposit the

performance security or to execute the agreement within the period specified, such a

failure will be treated as a breach of the terms and conditions of the bid and shall result

in the forfeiture of the bid security besides any other action for the default. The expenses

of completing and stamping the agreement shall be paid by the bidder who shall furnish

to the RCDF one executed stamped counter part of the agreement free of charge.

The performance security amount required to be deposited is 5% of the contract value.

The performance security upto Rs.10,00,000/- must be furnished in the form of

either Bankers Cheque/Pay order/Bank Draft issued by a scheduled bank in India.

If amount of performance security is more than Rs.10,00,000/-, the bidder/ supplier

shall furnish performance security in form of Bankers Cheque/Pay order/Bank

Draft upto Rs.10,00,000/- and above Rs.10,00,000/- can be furnished in the Bank

Guarantee. The validity period of BG shall be of 18 months from the date of

issuance of Rate Approval Letter.

11 Remittance charges on payment made to the firms will borne by the firm.

12 Cost of bidding document and bid processing fee not refundable, if bid not accepted.

13 Price escalation/de-escalation and payment :

The decrease/increase in price of Milk Plastic Crate reckoned based on the price of

HDPE Grade M60075 of Reliance Industries Ex-Jaipur Depot prevailing as on the date

of issuance of purchase order by respective Milk Unions would be applicable, as worked

out on the basis of weight of HDPE for one Milk Plastic Crate as 1.5kg. For this bidder

would be required to mention the price of the above raw material as prevailing on the

date mentioned in the bid form, enclosing the price list alongwith the bid.

The approved supplier has to submit without fail, on quarterly basis, the details of price

of raw material, in all cases whether changed or not viz. reduced/increased/unchanged to

the satisfaction of the RCDF for the issuance of price revision orders. The said details

shall have to be submitted by the supplier on his letter head alongwith an affidavit on a

Non-judicial stamp paper of Rs.100/- duly notarised, supported with a copy of letter

indicating the price of raw material either issued by Reliance Industries Limited or their

distributor/supporting price revision orders duly counter signed & stamped by the

approved supplier.

The price revision of the approved item will be done by the RCDF in the basic price

equal to the escalation/de-escalation in the basic price of raw material only. The decision

of MD, RCDF shall be final and binding on the bidder in this regard.

Until the details of price revision are received from the approved supplier and the

consequent price revision issued for the concerned period, 95% payment will be made

within one month of receipt of goods in satisfactory condition after adjusting deduction

and penalties, if any from the bills. 5% amount of the bill retained for want of price

revision, shall be released by the Milk Unions only after issuance of price revision order.

(Signed & Sealed by the tenderer 65 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

14 Demurrage :

14.1 The supplier shall bear and reimburse buyer demurrage charges, if any, paid by the buyer

of behalf of the supplier.

15 REJECTION:

15.1 Further the buyer reserves the right to reject the stores either in full or in part, if at the

time of delivery it is noticed that the items/ stores supplied do not confirm to the

description and quality stipulated in the bid. In such event buyer shall inform the

supplier immediately after such defect/quality problem is noticed.

15.2 If on rejection of the stores by the buyer or consignee at destination the supplier fails to

make satisfactory supplies within the stipulated period of delivery, the buyer shall be at

liberty to:

Allow the supplier to submit the store, in replacement of those rejected within the given

time, the supplier bearing the cost, if any, on such replacement, without being entitled to

any extra payment on that account.

Purchase of quantity of the stores rejected or other of a similar description (which stores

do not exactly comply with particulars, in the opinion of the buyer, which shall be final)

without notice to the supplier‟s liability as regards the supply of any further instalment

due under the contract.

Cancel the contract and purchase of items or others of a similar description (stores do not

exactly comply with the particulars in the opinion of the buyer, which shall be final) at

the risk and cost of the supplier.

If, however, due to exigencies of the milk union, such replacement either in whole or in

part is not considered feasible, milk union shall be at liberty to use such material and

deduct amount equal to 5% of the value of the material used from the approved rates.

However, the suitability of such material being fit for use will be subject to clearance by

the General Manager (QC), RCDF. Further, in such situation the milk union shall inform

the supplier regarding such decision at the earliest and will give an opportunity to the

supplier for being heard and the reasons for such deductions will be communicated.

15.3 Any stores rejected shall under all circumstances lie at the risk of the supplier from the

moment of such rejection till their removal and if such stores are not removed by the

supplier within such reasonable period as may be decided by the buyer, the buyer may

dispose off such stores at the supplier‟s risk and account and retain such portion of

proceeds as may be necessary to cover any expenses incurred in connection with such

disposal. The buyer shall also be entitled to recover handling and storage charges for the

period during which the rejected stores are not removed. This will include the cost of

disposal when necessary.

16 The supplier shall, at all time, indemnify the buyer against all claims which may be

made in respect of the stores or infringements of any right protected by patent,

registration of design or trademark etc. provided always that in the event of any claim in

respect of alleged breach of letters, patents, registered design of trade mark being made

against mark the buyer shall notify the supplier or the same and the supplier at his own

expenses, either settle any dispute or face any litigation and bear expenditure related to

the same that may arise therefrom.

(Signed & Sealed by the tenderer 66 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

17 The buyer may at any time, by notice in writing, summarily terminate the contract

without compensation to the contractor in any of the following events viz:

If the supplier, a firm or any partner thereof shall be at that time adjudged insolvent or

shall have a receiving order or order for administration of made against his or shall take

any proceedings for composition under any Insolvency Act for the time, being in force,

to make any convenience or assignment of his assets or enter into any arrangement or

composition with his creditors or suspend payment, if the firm is dissolved under the

partnership act., or,

If the supplier being a company is wound up voluntarily by the order of a court or a

receiver/ liquidator or Manager or on behalf of the Debenture holder is appointed or

circumstances shall have arisen which entitled the Court to Debenture holders to appoint

receiver, liquidator or Manager, or;

If the supplier commits any breach of the contract/herein not specifically provided that

such determination shall not prejudice any right of action or remedy which shall have

accrued or shall accrue thereafter and provided also the suppliers shall be liable to pay

the buyer for any extra expenditure, he is thereby put to and the supplier shall under no

circumstances be entitled to any gain in repurchase.

18 Force Majeure

18.1 The Supplier shall not be liable for forfeiture of its Performance Security, liquidated

damages, or termination for default if and to the extent that delays in performance or

other failure to perform its obligations under the Contract is the result of an event of

Force Majeure.

18.2 For purposes of this Clause, “Force Majeure” means an event or situation beyond the

control of the Supplier that is not foreseeable, is unavoidable, and its origin is not due to

negligence or lack of care on the part of the Supplier. Such events may include, but not

be limited to, acts of the Procuring Entity in its sovereign capacity, wars or revolutions,

fires, floods, epidemics, quarantine restrictions, and freight embargoes.

18.3 If a Force Majeure situation arises, the Supplier shall promptly notify the Procuring

Entity in writing of such condition and the cause and effects thereof.

Unless otherwise directed by the Procuring Entity in writing, the Supplier shall continue

to perform its obligations under the Contract as far as is reasonably practical, and shall

seek all reasonable alternative means at his cost for performance not prevented by the

Force Majeure event.

19 Price Fall Clause

19.1 The prices under a rate contract shall be subject to price fall clause. Price fall clause is a

price safety mechanism in rate contracts and it provides that if the rate contract holder

quotes / reduces its price to render similar goods, works or services at a price lower than

the rate contract price to anyone in the State at any time during the currency of the rate

contract (if approved supplier reduces rates to any other organization or any other party

of State, the responsibility of informing the reduced rate to RCDF shall be on the

approved supplier), the rate contract price shall be automatically reduced with effect

from the date of reducing or quoting lower price, for all delivery of the subject matter of

(Signed & Sealed by the tenderer 67 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

procurement under that rate contract and the rate contract shall be amended accordingly.

The firms holding parallel rate contracts shall also be given opportunity to reduce their

price by notifying them the reduced price giving them fifteen days time to intimate their

acceptance to the revised price. Similarly, if a parallel rate contract holding firm reduces

its price during currency of the rate contract, its reduced price shall be conveyed to other

parallel rate contract holding firms and the original rate contract holding firm for

corresponding reduction in their prices. If any rate contract holding firm does not agree

to the reduced price, further transaction with it, shall not be conducted.

20 All the documents and drawing supplied by the buyer must be treated as

`CONFIDENTIAL‟ must not be copied, reproduced, transmitted, or discussed otherwise

in whole or part, not duplicated, modified, divulged, or discussed to any third party nor

used in any other way without the consent of buyer in writing.

21 The order against this bid/ agreement is not transferable.

22 RCDF/Milk Union can inspect the works of the bidder/ approved supplier, with or

without notice, in order to assess that the firm is having adequate infrastructure and

facilities for the manufacture of the bid item as per the quality specification/to check that

the supplies are being made strictly as per our specifications.

23 The quantities mentioned in the bid are tentative and the actual quantities to be procured

may vary upward or downward suiting to the actual requirements.

24 The design and art work, wherever applicable, shall have to be got approved from

RCDF. No extra charges for art-work will be payable by Federation. Any change in

design/colour scheme decided by RCDF/Milk Union any time during the contract period

shall have to be implemented immediately. Rate per cylinder for carrying out such a

change during the contract period, wherever applicable, is to be quoted in the bid.

As regards increase/decrease over the number of colours specified in the technical

specifications enclosed, the supplier should indicate rate per colour for such

addition/deletion in printing on packaging material for taking care of the same in rates.

The vegetarian logo in green color shall be counted as separate color, if green color is

not already there in art & design but printing of Symbol for 100% vegetarian food or

printing of Agmark Replica including serial number as per the requirement of Agmark

authority / Milk Union wherever applicable, shall also have to be carried out, without

any additional/extra payment.

25 RCDF also reserves the right to debar or blacklist, if the performance of approved

supplier with respect to quality and time of supply etc. is found unsatisfactory. RCDF

also reserves the right to forfeit the bid security/performance security side by side to

recovering other due amounts in any other way including legal recourse.

26 RCDF may not consider the application of such applicant who has earlier been

debarred/censured/black listed or even those firms who have on their rolls

employees/executives/proprietors/partners of another already debarred/censured/black

listed firms in one or the other capacity. However, decision of RCDF shall be final in

this regard.

27 No item and condition in addition to the above mentioned will be agreed to. The

conditional offer/price bid which reflect/ affect the price of quoted item shall be liable

for rejection out rightly without any reference.

(Signed & Sealed by the tenderer 68 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

28 The present contract shall be governed overall by Rajasthan Cooperative Societies Act

and allied laws.

29 Dispute Resolution

29.1 In the event of any dispute in the interpretation of the terms of this agreement/ purchase

order or difference of opinion between the parties on any point in the purchase order

arising out of, or in connection with the agreement/accepted purchase order or with

regard to performance of any obligations hereunder by the either party, the parties hereto

shall use their best efforts to settle such disputes or difference of opinion amicably by

mutual negotiations. In case of any disputes, MD RCDF or person nominated by him

shall be the sole arbitrator to settle these disputes.

(Signed & Sealed by the tenderer 69 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

SECTION VI (B)

CONTRACT FORMS

AND

PERFORMANCE SECURITY

(Signed & Sealed by the tenderer 70 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

Section VI (B): Contract Forms

Contract Agreement

(To be executed on Non-Judicial Stamp Paper of appropriate value)

(Signed & Sealed by the tenderer 71 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

RATE CONTRACT FOR MILK PLASTIC HDPE CRATES OF

ISI TYPE MINIMUM 1.5 KG WEIGHT AND OF 168 MM

HEIGHT EACH CRATE

Between

Managing Director,

Rajasthan Cooperative Dairy Federation Ltd., Jaipur,

Saras Sankul, JLN Marg, Jaipur-302017

and

[Name of the Bidder]

Dated:

RATE CONTRACT AGREEMENT

(On non judicial stamp paper of value of prescribed amount)

1. An agreement made this ___________ day of ____________ between

M/s.____________________ hereinafter called “approved Bidder” which expression shall

where the context so admits, be deemed to include his heirs, successors, executors and

administrators of the one part and the Rajasthan Cooperative Dairy Federation Ltd.

(hereinafter called “the Federation” which expression shall, where the context so admits, be

deemed to include his successors in office and assigns) of the other part.

2. Whereas the approved Bidder has agreed with the Federation for supply of Milk Plastic

HDPE Crates of ISI Type minimum 1.5 kg. Weight and of 168 MM Height Each Crate

in the LOI/LOA/RAL/purchase order issued vide letter No._________ dated__________ and

in the manner set forth in the aforesaid order and the Bid Document.

3(a) And whereas the approved Bidder has deposited a sum of Rs._______ in form of

DD/Bank Guarantee as Performance security for the due performance of the agreement.

3(b) And whereas the approved Bidder has agreed:

(i) to keep the performance security with the Federation in form of DD/Bank Guarantee for

contract period or such extended period so as to cover the period of performance of

contract i.e. for supply of Milk Plastic HDPE Crates of ISI Type minimum 1.5 kg.

Weight and of 168 MM Height Each Crate as per the Bid

Document/LOI/LOA/RAL/purchase order.

(ii) that no interest shall be paid by the Federation on the performance security deposit.

(iii) that in case of breach of any terms & conditions of the aforesaid supply of Milk Plastic

HDPE Crates of ISI Type minimum 1.5 kg. Weight and of 168 MM Height Each

Crate as per Bid Document/LOI/LOA/ RAL/purchase order of this agreement by the

(Signed & Sealed by the tenderer 72 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

approved Bidder, the amount of the performance security shall be liable to forfeiture in

full or part by the Federation.

NOW THESE PRESENT WITNESS 1. In consideration of the payment to be made by the Federation at the rates set forth in the

aforesaid LOI/LOA/RAL/purchase order, the approved Bidder will duly supply Milk Plastic

HDPE Crates of ISI Type minimum 1.5 kg. Weight and of 168 MM Height Each Crate

against the purchase orders issued in the manner set forth and within the period stipulated in

the conditions of the Bid and order.

2. The following documents shall be deemed to form and be read and construed as part of this

Agreement, viz:

a) The Notice Inviting Bids

b) Instructions to Bidders

c) Bid Data Sheet

d) Schedule of Supply

e) General and Special Conditions of Contract

f) The Bid Submission Sheet and the Price Schedules including negotiated Price, if

any, submitted by the Supplier

g) LOI/LOA/RAL/Purchase Order and condition of aforesaid Purchase Order and

also any subsequent amendment as may be issued by the Federation will be

deemed to be taken as part of this agreement and are binding on the parties

executing this agreement.

3. That all the terms and conditions of the Bid Form including its Annexures stands ipso

facto included as terms of this agreement as inseparable part of this agreement and binding

on approved Bidder.

4. The mode of payment will be as specified in the Bid documents. Supply of Milk Plastic

HDPE Crates of ISI Type minimum 1.5 kg. Weight and of 168 MM Height Each

Crate shall be completed in the manner and time specified in the LOA/RAL/purchase

order. In case the approved Bidder fails to execute the work within the time specified in

the aforesaid LOA/RAL/purchase order, the conditions of liquidated damages for late

completion of work as stipulated in the aforesaid Bid Document/LOA/RAL/purchase

order/contract shall be enforced.

5. Amicable Settlement

The parties shall use their best efforts to settle amicably all disputes arising out of or in

connection with this Contract or the interpretation thereof. In the event of a dispute,

differences or claim arising in connection with the interpretation or implementation of

this Contract, the aggrieved party shall issue a written notice setting out the dispute/

differences or claim to the other party. Parties shall first attempt to resolve such dispute

(Signed & Sealed by the tenderer 73 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

through mutual consultation. If the dispute is not resolved as aforesaid within 30 days

from the date of receipt of written notice, the matter will be referred for Arbitration.

6. All disputes and difference arising between the parties out of the agreement or incidental

thereto shall be decided by arbitration under the provisions of the Arbitration and

Conciliation Act, 1996 or any other law for the time being in force and the same shall be

final and binding on both the parties. MD, RCDF or a person nominated by him shall be

the sole arbitrator to settle these disputes.

7. All the disputes pertaining to the said contract shall vest to the jurisdiction of Courts at

Jaipur.

In witness whereof the parties hereto have set their hands on the _____________ day

______________________.

SIGNATURE OF THE SIGNATURE FOR AND ON

APPROVED SUPPLIER: BEHALF OF the Federation:

Witness No.1 Witness No.1

Signature :______________________ Signature:_________________

Name :______________________ Name :_________________

Address :______________________ Address :_________________

______________________ _________________

Witness No.2 Witness No.2

Signature :______________________ Signature :_________________

Name :______________________ Name :_________________

Address :______________________ Address :_________________

(Signed & Sealed by the tenderer 74 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

(Performa of Bank Guarantee for Performance Security)

(On Non-judicial stamp paper as prescribed by bank)

This deed of Guarantee made this __________ day of ____________ 2019 (Two

thousand nineteen) by _____________ (Name and address of the Bank) (hereinafter

referred to as “The Bank”) which expression shall be here the context or meaning so

requires, includes the successors and assignees of the Bank and the Rajasthan Co-

operative Dairy Federation Ltd., Jaipur, Rajasthan, (hereinafter referred to as “The

Federation which expression shall unless repugnant to the context or the meaning there of

include its legal representatives, successors and assignees.

WHEREAS the Federation has placed its RAL/work order bearing

No.___________________ dated _____________ on Name and address of the party

(hereinafter called “The approved bidder”) for supply of Milk Plastic HDPE Crates of

ISI Type minimum 1.5 kg. Weight and of 168 MM Height Each Crate and whereas

the approved bidder has agreed to provide a Bank Guarantee valid for the contracted

period from any Scheduled Bank approved by RBI in the prescribed format of RCDF for

an amount of Rs. ----------------/- (Rupees in words) towards security to RCDF to

safeguard its contract. The Bank guarantee will be released three months after expiry of

contract period on production of satisfactory performance and no dues certificate from

the concerned milk unions/units and an undertaking in case any claim/ liability /recovery

in account arises after the expiry of the contract, firm shall deposit the same with RCDF

without any delay.

In consideration of the approved bidder having agreed to provide a B.G. of Rs

__________ (Rupees _______ only) being the performance security amount,

we__________(Name of the Bank) hereby undertake and guarantee to make repayment

to the Federation of the said Rs. __________ (Rupees ___________only ) or any part

thereof which becomes payable to the Federation in accordance with the terms and

conditions of the said work order within 07 days from the date of demand from the

Federation. The Bank further undertakes not to revoke this guarantee during its currency

except with the previous consent of the Federation in writing and this guarantee shall be a

continuous and irrevocable guarantee upto a sum of Rs. _______ (Rupees _________

only). The Bank shall not be discharged or released from this guarantee by any

arrangement between the approved bidder and the Federation with or without the consent

of the Bank or any alterations in the obligations of the parties or by any indulgence,

forbearance shown by the Federation to the bidder and that the same shall not prejudice

or restrict remedies against the Bank nor shall the same in any event be a ground of

defence by the Bank against the Federation. We_________ (Name of the Bank) do

hereby undertake to pay an amount due and payable under this guarantee without any

(Signed & Sealed by the tenderer 75 RCDF

in token of acceptance of above) Tender form for Milk Plastic Crate

demur, merely on demand from the Federation stating that the amount claimed is due to

the Federation. In case the Federation puts forth a demand in writing on the Bank for the

payment of the amount in full or in part against this guarantee,

The Bank shall consider that such demand by itself is a conclusive evidence and proof

that the bidder has failed in complying with the terms and conditions stipulated by the

Federation without raising any dispute regarding the reasons for any such lapse/failure on

the part or the approved bidder.

This guarantee shall be in addition to and without prejudice to any other securities

or remedies which the Federation may have or hereafter possess against the approved

bidder and the Federation shall be under no obligation to marshal in favour of the Bank

any such securities or fund or assets that the Federation may be entitled to receiving or

have a claim upon and the Federation at its absolute discretion may vary, exchange,

renew, modify or refuse to complete or enforce or assign any security or instrument.

The Bank agrees that the amount hereby guaranteed shall be due and payable to

the Federation on Federation‟s serving a notice requiring the payment of the amount and

such notice shall be served on the Bank either by actual delivery thereof to the Bank or

by dispatch thereof to the Bank by registered post at the address of the said Bank. Any

notice set to the Bank at its address by Registered Post shall be deemed to have been duly

served on the Bank notwithstanding that the notice may not in fact have been delivered to

the Bank.

In order to give full effect to the provisions of this guarantee the Bank hereby

waives all rights inconsistent with the above provisions and which the Bank might

otherwise as a guarantor be entitled to claim and enforce.

Notwithstanding anything contained here in before, our liability under this

guarantee is restricted to Rs. _______________ (Rupees __________ only) and it shall

remain in force until contract period, unless a suit or action is filed against us enforce

such claims, within three months from end of the contract period, all the Federation‟s

rights under this guarantee shall be forfeited and we shall be relieved and discharged

from all liabilities there under.

Place :

Date :

(SIGNATURE)

SEAL OF BANK