AttestationE1-221

Herewith it is confirmed that in the first half of 2017 a regular supervision of the product

Birch plywood EN 636-2

plywood, birch, phenolic-formaldehyde (PF), unfacedtechnical class: DIBt 100, E1

in the thickness range: 12 mm ≤ 25 mm

manufactured by

A/S Latvijas Finierismill "Lignums"Finiera iela 6

1016 RigaLatvia

was carried out by the approved supervision body (NDS08)

Fraunhofer-Institute for Wood Research

Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany

according to supervision contract no. 0221 dated 11 April 1996. It was found that the requirements on personal and equipment aresuitable to produce the product in an adequate way and the factory production control meets the requirements of the “Regulationon the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline 100)” datedJune 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuous externalsupervision of factory production control shall take place twice a year.

Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld

Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München

WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft

Dipl.-Ing. Harald SchwabHead of the Testing, Supervision

and Certifying BodyBraunschweig, 17 October 2017

AttestationE1-265

Herewith it is confirmed that in the first half of 2017 a regular supervision of the product

Birch plywood EN 636-2

plywood, birch, phenolic-formaldehyde (PF), unfacedtechnical class: DIBt 100, E1

in the thickness range: > 12 mm ≤ 25 mm

manufactured by

A/S Latvijas Finierismill "Furniers"Bauskas iela 59

1004 RigaLatvia

was carried out by the approved supervision body (NDS08)

Fraunhofer-Institute for Wood Research

Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany

according to supervision contract no. 0265 dated 26 February 1999. It was found that the requirements on personal and equipmentare suitable to produce the product in an adequate way and the factory production control meets the requirements of the“Regulation on the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline100)” dated June 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuousexternal supervision of factory production control shall take place twice a year.

Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld

Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München

WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft

Dipl.-Ing. Harald SchwabHead of the Testing, Supervision

and Certifying BodyBraunschweig, 17 October 2017

AttestationE1-501

Herewith it is confirmed that in the first half of 2017 a regular supervision of the product

Birch plywood EN 636-2

plywood, birch, phenolic-formaldehyde (PF), unfacedtechnical class: EN 636-2; DIBt 100, E1

in the thickness range: 12 mm ≤ 25 mm

manufactured by

A/S Latvijas Finierismill "Verems"

Lejas Ancupani 4604 Veremu parish

Latvia

was carried out by the approved supervision body (NDS08)

Fraunhofer-Institute for Wood Research

Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany

according to supervision contract no. 0501 dated 12 June 2006. It was found that the requirements on personal and equipment aresuitable to produce the product in an adequate way and the factory production control meets the requirements of the “Regulationon the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline 100)” datedJune 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuous externalsupervision of factory production control shall take place twice a year.

Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld

Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München

WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft

Dipl.-Ing. Harald SchwabHead of the Testing, Supervision

and Certifying BodyBraunschweig, 17 October 2017

AttestationE1-581

Herewith it is confirmed that in the first half of 2017 a regular supervision of the product

Birch Plywood EN 636-1

plywood, birch, melamine-urea-formaldehyde (MUF), unfacedtechnical class: EN 636-1; DIBt 100, E1

in the thickness range: > 12 mm ≤ 25 mm

manufactured by

A/S Latvijas Finierismill "Lignums"Finiera iela 6

1016 RigaLatvia

was carried out by the approved supervision body (NDS08)

Fraunhofer-Institute for Wood Research

Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany

according to supervision contract no. 0581 dated 20 August 2013. It was found that the requirements on personal and equipmentare suitable to produce the product in an adequate way and the factory production control meets the requirements of the“Regulation on the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline100)” dated June 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuousexternal supervision of factory production control shall take place twice a year.

Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld

Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München

WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft

Dipl.-Ing. Harald SchwabHead of the Testing, Supervision

and Certifying BodyBraunschweig, 17 October 2017

AttestationE1-580

Herewith it is confirmed that in the first half of 2017 a regular supervision of the product

Birch Plywood EN 636-1

plywood, birch, melamine-urea-formaldehyde (MUF), unfacedtechnical class: EN 636-1, DIBt 100, E1

in the thickness range: > 12 mm ≤ 25 mm

manufactured by

A/S Latvijas Finierismill "Furniers"Bauskas iela 59

1004 RigaLatvia

was carried out by the approved supervision body (NDS08)

Fraunhofer-Institute for Wood Research

Wilhelm-Klauditz-Institut WKIBienroder Weg 54 E, 38108 Braunschweig, Germany

according to supervision contract no. 0580 dated 20 August 2013. It was found that the requirements on personal and equipmentare suitable to produce the product in an adequate way and the factory production control meets the requirements of the“Regulation on the classification and external supervision of wood-based panels regarding formaldehyde emission (DIBt - Guideline100)” dated June 1994. This attestation is part of the evaluation report and is valid for the following 8 months. The continuousexternal supervision of factory production control shall take place twice a year.

Vorstand der Fraunhofer-GesellschaftProf. Dr.-Ing. habil. Prof. E.h. Dr.-Ing. E.h. mult. Dr. h.c.Reimund Neugebauer, PräsidentProf. (Univ. Stellenbosch) Dr. rer. pol. Alfred GossnerProf. Dr. rer. publ. ass. iur. Alexander KurzProf. Dr. rer. nat. Georg Rosenfeld

Fraunhofer-Gesellschaft zur Förderungder angewandten Forschung e. V., München

WKI ist eine eingetragene Markeder Fraunhofer Gesellschaft

Dipl.-Ing. Harald SchwabHead of the Testing, Supervision

and Certifying BodyBraunschweig, 17 October 2017