e1/t1/cept/isdn-pri - t3/e3/d3/sts-1 interface ... brochure feb-08.pdf · • dje series - smd...

Interface Transformers •Common Mode Interface Chokes •

SMD and Through Hole Packaging •Single, Dual and Octal Transformers •

E1/T1/CEPT/ISDN-PRI - T3/E3/D3/STS-1Interface Transformers for

Telecommunication Products

THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications

SE

CT

ION

9

ntmagnetics

nuvotem

Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com

IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: [email protected]

GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: [email protected]

Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: [email protected] Site: www.ntmagnetics.cz

IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: [email protected] Site: www.talemaindia.com

CONTENTS

E1 / T1 / PRI / CEPT• IC Selection Guide for Single & Dual Interface Transformers - 3 - 4• MJM Series - Miniature SMD Dual Interface Transformers - 16 terminals - 0.05” (1.27mm) pitch - 5 - 6• MJS Series - SMD Dual Interface Transformers - 12 terminals - 0.1” (2.54mm) pitch - 6 - 7• MJS-A Series - SMD Dual Interface Transformers with CM Choke - 12 terminals - 0.1” (2.54mm) pitch - 8• IS2M Series - Single THT Interface Transformers - 9• MJE Series - Single SMD Interface Transformers - 10• MGJ Series - Dual Port SMD Transformer Modules with CM Choke on Tx and RX Channels - 11• IC Selection Guide for Quad Port Transformer Modules - 12• MJQ Series - SMD Octal Transformer Modules for Quad Ports - 40 terminals, 0.05” (1.27mm) pitch - 13 - 14• Octal 75/120 Ohm Matching Transformer Module for Quad Ports - 48 terminals, 0.05” (1.27mm) pitch - 15

T3 / DS3 / E3 / STS-1• IC Selection Guide for 75 ohm bandwidth applications - 16• DJE Series - SMD Interface Transformers for 75 ohm Bandwith applications - 17• DJM Series - SMD Dual Wideband Interface Transformers - 18• DTM - Six Transfomer Module for Tri-Port applications - 20 terminals, 0.04” (1.02mm) pitch - 19

Common Mode Chokes for Data Line Filtering - 20 - 22

Tape & Reel Packaging and Dimensions - 23 - 24

Authorized Talema Sales Representatives - 25

Magnetic Components for E1/T1/CEPT/ISDN-PRI - T3/E3/D3/STS-1

Page Nr.


2

TALEMA PROFILEFounded in 1975, The TALEMA International Group hasestablished itself as a world leader in the manufacture oftoroidal transformers and related magnetic components. Ourstrong technical engineering expertise has contributed to thegrowth of our current workforce to over 1,200 employees inmanufacturing locations in the Czech Republic and India.

Over the years The Talema Group has succeeded indesigning, producing and delivering in excess of 50 milliontransformers to its customers. The recent incorporation ofxDSL technology into our extensive range of Telecom andLAN magnetics offerings, such as ISDN, 10Base-T, Ethernettransformers for 100/1000Base-T, has broadened our marketoffering to an even higher level.

QUALITYThe TALEMA Group has a total commitment to quality andemploys Lean Six Sigma training for engineering, productionand administrative staff to help achieve a goal of zero defects.All facilities maintain very stringent Quality Control and QualityAssurance procedurees and are certified to and manufacturein accordance with ISO-9001:2000, TS-16949:2002 andmeet a broad range of International Standards including UL,VDE, IEC, and EN.

Performance has been proven in the many design in’s ofour products. The fact that we maintain a ship-to-stock vendorrating with over 200 national and international companiesis, to us, the best testimonial of our commitment to quality.

ENVIRONMENTAll TALEMA International Groupmanufacturing facilities are RoHScompliant and all chokes, inductors andHF components are produced in anEnvironment Management System (EMS)facility certified to ISO-14001:2004.

Visit our web site for detailed electrical and mechanical specifications for Talema’s extensive line of LANMagnetic Components for Ethernet & Telecom Applications - www.talema-nuvotem.com

3

IC - E1 / T1 / PRI / CEPT Transformer Selection Guide

Talema manufactures a wide range of transformers for all 1.544 and 2.048Mbbs applications. A full listing of LIU TransceiverIC’s with recommended Talema transformers is listed on the following cross reference chart.Performance has been proven in the many design-ins of our products in these applications. Quality and consistency isguaranteed through 100% testing of the specified parameters for Primary Inductance, Leakage Inductance, Turns Ratio, DCresistance and Interwinding Capacitance. This ensures that the Return Loss and Pulse Waveshape requirements of ITU-TG.703 and ANSI T1.102 can be met. Additionally all parts are 100% tested for 1500V minimum isolation.Temperature PerformanceProducts are offered with extended temperature ( -40° to 85°C ) as standard. Required minimum inductance levels aremaintained at the lower temperature limits.

seludoMecafretnIIRP-NDSI/TPEC/1E/1TrofediuGnoitceleSremrofsnarT-CI

rerutcafunaMCI CIrebmuNtraP noitacilppA

rebmuNtraPremrofsnarTamelaT

eloHhguorhTelgniS DMSlauDniP21 lauDniP61DMS

timsnarT evieceR xR/xT xR/xT sR/xTpihCengoloC 1E-CFH M2S -- -- -- -- 230-MJM

cigoLsurriC)latsyrC(

81316 1E021 91-/7-M2SI 02-/51-M2SI - 810-SJM 810-MJM81316 1E57 72-/71-M2SI 02-/51-M2SI -- --77516 1E&1T 91-/7-M2SI 91-M2SI A710-SJM 710-SJM 710-MJM

57516,A47516,A53516,A50316,A40316 1T 12/8-M2SI 91-/12-M2SI A910-SJM 910-SJM 910-MJM57516,A47516,A53516,A50316,A40316 1E57 21-M2SI 91-/7-M2SI A810-SJM 520-SJM 520-MJM57516,A47516,A53516,A50316,A40316 1E021 21-M2SI 91-/7-M2SI A520-SJM 520-SJM 520-MJM

48816 1J/1E/1T -- -- A710-SJM --38516,28516 12-/8-M2SI 12-/8-M2SI A310-SJM 310-SJM 310-MJM18516,01316 91-/7-M2SI 02-/51-M2SI A810-SJM 810-SJM 810-MJM18516,01316 tsoH 91-/7-M2SI 91-/7-M2SI -- -- 620-MJM18816,08816 12-/8-M2SI 91-/7-M2SI A910-SJM 910-SJM 910-MJM

A48516,48516 3QI 91-/7-M2SI 91-/7-M2SI A710-SJM 710-SJM 710-MJMA48516,48516,38516,28516 5QI 12-/8-M2SI 12-/8-M2SI A310-SJM 310-SJM 310-MJM

mixaM)sallaD(

8412SD,9412SD,5512SD,6912SD 91-/7-M2SI 02-/51-M2SI A810-SJM 810-SJM 810-MJM4512SD,3512SD,2512SD,1512SD 12-/8-M2SI 02-/51-M2SI A410-SJM 910-JSM 910-MJM4512SD,3512SD,2512SD,1512SD 52-/01-M2SI 02-/51-M2SI A130-SJM 820-JSM 820-MJM

95Q/943/843Q/84Q/8412SD V3 91-/7-M2SI 02-/51-M2SI A810-SJM 810-JSM 810-MJM84Q,8412SD V5 52-/01-M2SI 02-/51-M2SI A130-SJM 820-JSM 820-MJM

453Q/45312SD,253Q/25312SD 1E/1T 91-/7-M2SI 02-/51-M2SI A810-SJM 810-JSM 810-MJM455Q/45512SD,255Q/25512SD 1E/1T 12-/8-M2SI 02/51-M2SI A410-SJM 910-JSM 910-MJM455Q/45512SD,255Q/25512SD 1E/1T 52-/01-M2SI 02-/51-M2SI A130-SJM 820-JSM 820-MJM

82562SD,85412SD,55412SD,3052SD,20562SD 7-M2SI 51-M2SI A810-SJM 810-JSM 810-MJM

raxE

7995TRX,7985TRX,4985TRX,19L95TRX,A3865TRX 91-/6-M2SI 91-/6-M2SI A710-SJM 710-JSM 710-MJM4975TRX,3975TRX 21-M2SI 02-/42-M2SI A640-SJM 520-JSM 520-MJM

02D28,42L28,72L18TRX 52-M2SI 91-/6-M2SI A710-SJM 820-JSM 820-MJM83L38TRX,43L38TRX,03L38TRX 91-/6-M2SI 91-/6-M2SI A810-SJM 810-JSM 810-MJM

83L68TRX,43L68TRX,23L68TRX,03L68TRX 6-M2SI 42-M2SI A810-SJM 810-SJM 810-MJM02D28,8827TRX,4865T 52-M2SI 91-/7-M2SI A820-SJM 820-JSM 820-MJM

TDI

8502V28,4502V28,L8402V28,8402V28,4402V28 6-M2SI 6-M2SI A710-SJM 710-JSM 340-MJME8402V28,E4402V28,E2402V28,E1402V28 6-M2SI 42-M2SI A810-SJM 810-JSM 810-MJM

8802V28,4802V28,2802V28,1802V28 6-M2SI 42-M2SI A810-SJM 810-JSM 810-MJM8822P28,4822P28,2822P28,1822P28 6-M2SI 42-M2SI A810-SJM 810-JSM 810-MJM

noenifnI)snemeiS(

5522BEP,4522BEP 1J/1T/1E -- -- A120-SJM 120-JSM 010-MJM5522BEP,4522BEP 1J/1T/1E -- -- A120-SJM 120-JSM 120-MJM

6522BEP,45522BEP,40522BEP V3.3 -- -- A230-SJM -- 220-MJM

Germany: Int.+49 89 - 841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427 - 244 1325 http://www.talema-nuvotem.com

4

Notes:1. Dallas IC’s use either a 1:1.15 or a 1:1.36 ratio transformer depending on the application. Consult the Dallas application notes or contact Talema.2. Consult Siemens Application Note 12.90 (‘Just a Single Line Transformer Type for all IPAT (PEB2235) Applications’) for calculation of resistorvalues.3. The Dual Transformer types MDM-010 and MDM-021 are electrically identical but have different schematics. Either part may be used with thePEB2254 and PEB2255.4. See Level One Application Note 118 (‘Transformer Specifications for Level One Transceiver Applications’) for further details on the choice oftransformer ratios.

seludoMecafretnIIRP-NDSI/TPEC/1E/1TrofediuGnoitceleSremrofsnarT-CI

CIrerutcafunaM

CIrebmuNtraP noitacilppA

rebmuNtraPremrofsnarTamelaT

eloHhguorhTelgniS DMSlauDniP21 DMSlauDniP61timsnarT evieceR xR/xT xR/xT sR/xT

letnI)enOleveL(

103XL,003TXL 91-/7-M2SI 91-/7-M2SI A710-SJM 710-JSM 710-MJM703TXL,503TXL,403TXL 1E/1T 91-/7-M2SI 91-/7-M2SI A710-SJM 710-JSM 710-MJM703TXL,503TXL,403TXL 1T 12-/8-M2SI 91-/7-M2SI A910-SJM 910-JSM 910-MJM703TXL,503TXL,403TXL 1E021,57 21-M2SI 91-/7-M2SI A810-SJM 520-JSM 520-MJM703TXL,503TXL,403TXL 4D,1-XSD 11-M2SI 7-M2SI A510-SJM 610-JSM 610-MJM813TXL,713TXL,013TXL 91-/7-M2SI 02-/51-M2SI A810-SJM 810-JSM 810-MJM513TXL,313TXL,213TXL 62-M2SI 02-/51-M2SI -- -- --

133TXL 1E/1T 91-/7-M2SI 91-/7-M2SI A810-SJM 810-JSM 810-MJM233TXL,133TXL 11-M2SI 7-M2SI A510-SJM 610-JSM 610-MJM233TXL,133TXL 12-/8-M2SI 91-/7-M2SI A910-SJM 910-JSM 910-MJM233TXL,133TXL 91-/7-M2SI 91-/7-M2SI A710-SJM 710-JSM 710-MJM533TXL,433TXL 1E/1T 91-/7-M2SI 91-/7-M2SI A710-SJM 710-JSM 710-MJM533TXL,433TXL 1E57/021 52-/01-M2SI 91-/7-M2SI A130-SJM 820-JSM 820-MJM533TXL,433TXL 1E57 21-M2SI 91-/7-M2SI 520-JSM 520-MJM533TXL,433TXL 61-M2SI 51-M2SI 620-MJM

633TXL 7-M2SI 02-M2SI A640-SJM 710-JSM 420-MJM953TXL,153TXL,053TXL 1E/1T 91-/7-M2SI 02-/51-M2SI A810-SJM 810-SJM 810-MJM

153TXL,053TXL 11-M2SI 7-M2SI A910-SJM 910-JSM 910-MJM153TXL,053TXL 1E021 11-M2SI 7-M2SI A510-SJM 610-JSM 610-MJM

363TXL,263TXL,163TXL,063TXL 1E/1T 91-/7-M2SI 02-/51-M2SI A810-SJM 810-SJM 810-MJM363TXL,263TXL,163TXL,063TXL 12-/8-M2SI 91/7-M2SI A910-SJM 910-JSM 910-MJM

163TXL,063TXL 11-M2SI 7-M2SI 610-JSM 610-MJM883TXL,683TXL,483TXL,183TXL,083TXL 1E/1T 91-/7-M2SI 02-/51-M2SI A810-SJM 810-JSM 810-MJM883TXL,683TXL,483TXL,183TXL,083TXL 11-M2SI 7-M2SI 610-JSM 610-MJM

8013TXL,4013TXL 02-/51-M2SI 02-/51-M2SI A640-SJM 710-JSM 710-MJM8013TXL,4013TXL 840-MJM

eregA)tnecuL(

A0927T,8827T 1E/TPEC 52-/01-M2SI 91-/6-M2SI A820-SJM 820-JSM 820-MJMA9827T 1SD 12-/32-M2SI 91-/7-M2SI A910-SJM 910-JSM 910-MJM

8967T,0967T,8867T,0367T TPEC 52-/01-M2SI 52-/01-M2SI A010-SJM 010-JSM8967T,0967T,8867T,0367T 1SD 12-/32-M2SI 12-/32-M2SI A310-SJM 310-JSM 310-MJM

7967T,3967T TPEC A420-SJM 830-MJM1C40UILT 1SD 12-/32-M2SI 12-/32-M2SI A310-SJM 310-JSM 310-MJM1C40UILT TPEC 52-/01-M2SI 52-/01-M2SI A010-SJM 010-JSM

arreiS-CMP4134MP,1436MP,1434MP 52-M2SI 91-/7-M2SI A820-SJM 820-JSM 820-MJM

5234MP,3234MP,9134MP,8134MP 91-/7-M2SI 91-/7-M2SI A710-SJM 710-JSM 710-MJM4534MP,1534MP TEMOC A420-SJM 830-MJM

deepsdniM)tnaxenoC(

0158TB 1E/1T 21-M2SI 7-M2SI A810-SJM 130-MJM0158TB 1E/1T 21-M2SI 7-M2SI A520-SJM 520-JSM 520-MJM

6738TB,5738TB,0738TB rewoPwoL 8-M2SI 51-M2SI A410-JSM 910-JSM 910-MJM6738TB,5738TB,0738TB IRretteB 52-M2SI 51-M2SI A130-SJM 820-JSM 820-MJM

knilraZ)letiM(

6709TM,1709TM A420-JSM 830-MJM6709TM,5709TM A230-JSM 220-MJM5709TM,4709TM 7-M2SI 42-M2SI A810-JSM 810-JSM 810-MJM


5

E1/T1/ PRI/CEPT Dual Transformer Modules

Features• SMD design ideal for pick and place compatability while

providing unrivaled coplanarity• controlled parameters ensure full compliance with

ITU-T G.703 when matched with recommended IC• ideal for all 1.544 and 2.048 Mbs interface applications• manufactured in an ISO-9001:2000, TS-16949:2002

and ISO-14001:2004 certified Talema facility• 1500Vrms minimum isolation voltage• extended operating temperature: -40° to +85°C• fully RoHS compliant and meets lead free reflow

level J-STD-020C

Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings

sremrofsnarTlauD-seireSMJM

traPrebmuN

I-remrofsnarT II-remrofsnarT

citamehcSsnruToitaR

%5-/+

LP)niMHm(

R UC )smhO( .irPsniP

.ceSsniP

snruToitaR

%5-/+

LP)niMHm(

R UC )smhO( .irPsniP

.ceSsniP.irP .ceS .irP .ceS

010-MJM :tc1 tc14.1 2.1 14.0 85.0 41-51-61 3-2-1 :tc1 tc14.1 2.1 14.0 85.0 9-01-11 8-7-6 A

310-MJM :tc1 tc51.1 2.1 93.0 44.0 3-2-1 41-51-61 :tc1 tc51.1 2.1 93.0 44.0 8-7-6 9-01-11 A

610-MJM :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 :tc1 tc3.2 2.1 93.0 88.0 41-51-61 3-2-1 A

710-MJM :tc1 tc2 2.1 93.0 77.0 41-51-61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 A

810-MJM :tc1 tc1 2.1 93.0 83.0 41-51-61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 A

910-MJM :1 tc51.1 2.1 93.0 44.0 41--61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 B

120-MJM :tc1 tc14.1 2.1 14.0 85.0 3-2-1 41-51-61 :tc1 tc14.1 2.1 14.0 85.0 9-01-11 8-7-6 A

220-MJM :tc1 tc1 0.1 93.0 93.0 9-01-11 8-7-6 tc1 tc4.2: 0.1 14.0 09.0 3-2-1 41-51-61 A

320-MJM :1 tc1 2.1 93.0 93.0 41-61 3-2-1 :1 tc1 2.1 93.0 93.0 8-6 9-01-11 C

420-MJM :tc1 tc1 0.1 93.0 93.0 8-7-6 9-01-11 :tc1 tc76.1 0.1 93.0 66.0 41-51-61 3-2-1 A

520-MJM :1 62.1/1 2.1 93.0 84.0 41-61 3-2-1 :tc1 tc2 2.1 93.0 77.0 8-7-6 9-01-11 B

620-MJM :tc1 tc1 2.1 93.0 93.0 41-51-61 3-2-1 :tc1 tc5.1 2.1 93.0 85.0 8-7-6 9-01-11 A

720-MJM :1 tc2 6.1 14.0 38.0 41-61 3-2-1 :2 1 6.1 14.0 12.0 8-6 9-11 D

820-MJM :tc1 tc2 2.1 93.0 77.0 41-51-61 3-2-1 1 tc63.1: 2.1 93.0 25.0 8-6 9-01-11 E

920-MJM :1 tc24.2 2.1 93.0 49.0 41-61 3-2-1 1 tc24.2: 2.1 93.0 49.0 8-6 9-01-11 C

030-MJM :2 1:1 2.1 64.0 62.0 41-61 4-3,2-1 :2 1:1 2.1 64.0 62.0 9-11 8-7,6-5 F

130-MJM tc2 62.1/1: 5.1 14.0 25.0 3-2-1 41-51-61 tc2 62.1/1: 5.1 14.0 25.0 9--01-11 8-7-6 A

230-MJM :1 24.2 2.1 93.0 49.0 41-61 3-2-1 :1 tc1 2.1 93.0 93.0 8-6 9-01-11 C

*330-MJM :1 4.2/9.1 0.1 14.0 49.0 41-51-61 3-2-1 :97.0 1/9.1 0.1 04.0 57.0 8-7-6 9-01-11 A

430-MJM tc1 tc5.1: 5.1 14.0 26.0 3-2-1 41-51-61 tc1 tc5.1: 5.1 14.0 26.0 8-7-6 9-01-11 A

530-MJM :tc1 tc1 2.1 93.0 93.0 8-7-6 9-01-11 :tc1 tc63.1 2.1 93.0 25.0 3-2-1 41-51-61 A

630-MJM sc2 2/75.1: 5.1 14.0 28.0 2-1 sc2 2/75.1: 5.1 14.0 28.0 6-5 G

730-MJM tc1 tc1: 2.1 93.0 93.0 41-51-61 3-2-1 tc1 tc63.1: 2.1 93.0 35.0 8-7-6 9-01-11 A

830-MJM :tc1 tc24.2 2.1 93.0 49.0 3-2-1 41-51-61 :tc1 tc24.2 2.1 93.0 49.0 8-7-6 9-01-11 A

930-MJM :1 4.2/2 0.1 93.0 49.0 3-1 41-51-61 1 1/97.0: 0.1 93.0 93.0 8-6 9-01-11 H

040-MJM :tc1 tc4.2 2.1 93.0 49.0 3-2-1 41-51-61 tc1 tc4.2: 2.1 93.0 49.0 8-7-6 9-01-11 A

140-MJM 1 tc2: 2.1 93.0 77.0 3-1 41-51-61 1 sc2: 2.1 93.0 77.0 9-11 8-7,6-5 J

240-MJM 1 tc63.1: 2.1 93.0 35.0 41-61 3-2-1 1 tc2: 2.1 93.0 77.0 8-6 9-01-11 C

340-MJM tc1 tc2: 2.1 93.0 77.0 3-2-1 41-51-61 tc1 tc2: 2.1 93.0 77.0 8-7-6 9-01-11 A

440-MJM tc1 tc2: 2.1 93.0 77.0 3-2-1 41-51-61 1 1: 2.1 93.0 93.0 8-6 9-11 K

540-MJM tc1 tc2: 2.1 93.0 77.0 3-2-1 41-51-61 tc1 tc24.2: 2.1 93.0 59.0 8-7-6 9-01-11 A

640-MJM tc1 tc1: 2.1 93.0 93.0 3-2-1 41-51-61 tc1 tc1: 2.1 93.0 93.0 8-7-6 9-01-11 A

740-MJM tc1 tc62.1: 2.1 93.0 05.0 3-2-1 41-51-61 tc1 tc62.1: 2.1 93.0 05.0 8-7-6 9-01-11 A

840-MJM tc1 8.0:1: 2.1 93.0 93.0 41-51-61 4-3,2-1 tc1 8.0:1: 2.1 93.0 93.0 9-01-11 8-7,6-5 G

940-MJM tc1 2:85.1: 2.1 93.0 08.0 4-3-2 31-41,51-61 1 2:56.1: 2.1 93.0 08.0 7-6 9-01,11-21 L

050-MJM tc1 1:1: 2.1 93.0 93.0 41-51-61 4-3,2-1 tc1 1:1: 2.1 93.0 93.0 9-01-11 8-7,6-5 G

150-MJM tc4.2:tc1 2.1 93.0 49.0 3-2-1 41-51-61 tc1:tc1 2.1 93.0 93.0 8-7-6 9-01-11 A

1:97.0=01-11:8-6sniP,9.1:97.0=11-9:8-6sniP;4.2:1=3-1:41-61sniP,9.1:1=2-1:41-61sniP:oitaRsnruT330-MJM*


6

MJM Dimensions

Surface Coplanarity will be 0.004(0.10) maximumDimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise

B1

2

36

7

8

16

1411

10

9

E1

2

36

8

16

15

1411

10

9

D1

2

36

8

16

1411

9

A1

2

36

7

8

16

15

1411

10

9

C1

2

36

8

16

1411

10

9

H1

36

8

16

15

1411

10

9

J1

3567

8

16

15

1411

9

K1

2

36

8

16

15

1411

9

L2

3

46

7

16151413121110 9

G16

15

1411

10

9

12345678

F12345678

16

1411

9


Packaging & Schematics for MJM Series Dual Transformer Modules

0° -

8°

0.079(2.00)

0.394(10.60)

0.028(0.70)

0.050(1.27)

0.350(8.89)

Suggested PadLayout

0.378(9.60)

0.504(12.80)

0.077 (1.96)

0.346(8.80)

TALEMA INWK/YR

Part Number

0.350(8.89)

Schemat-ics






0.189(4.80)

0.236(6.00) 0.016 x 0.016

(0.40 x 0.40)

7

Surface Coplanarity will be 0.004(0.10) maximum

Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise

0° -

8°

0.189(4.80)

0.236(6.00) 0.020 x 0.12

(0.50 x 0.30)

0.669 (17.00)

0.598(15.20)

0.085(2.15)

0.472(13.00)

TALEMA INWK/YR

Part Number

0.500 (12.70)

B1

2

34

5

6

12

10 9

8

7

E1

2

34

6

12

11

10 9

8

7

A1

2

34

5

6

12

11

10 9

8

7

C1

2

34

6

12

10 9

8

7

MSJ Series Schematic

0.118(3.00)

0.640(16.25)

0.050(1.27)

0.500(12.70)

Suggested PadLayout

Features• SMD design ideal for pick and place compatability

while providing unrivaled coplanarity• common mode choke included on both Tx and Rx

channels for optimum EMI performance• controlled parameters ensure full compliance with

ITU-T G.703 when matched with recommended IC• manufactured in an ISO-9001:2000, TS-16949:2002


level J-STD-020C



sremrofsnarTlauD-seireSSJM

traPrebmuN

I-remrofsnarT II-remrofsnarT

citamehcSsnruToitaR

%2-/+

LCO)niMHm(

)smhO(RCD .irPsniP

.ceSsniP

snruToitaR

%2-/+

LCO)niMHm(

)smhO(RCD .irPsniP


010-SJM :tc1 tc63.1 2.1 02.1 04.1 3-2-1 01-11-21 :tc1 tc63.1 2.1 02.1 04.1 6-5-4 7-8-9 A310-SJM :tc1 tc51.1 2.1 02.1 04.1 3-2-1 01-11-21 :tc1 tc51.1 2.1 02.1 04.1 6-5-4 7-8-9 A610-SJM :tc1 tc3.2 2.1 02.1 01.2 01-11-21 3-2-1 :tc1 tc2 2.1 02.1 01.2 6-5-4 7-8-9 A710-SJM :tc1 tc2 2.1 00.1 07.1 01-11-21 3-2-1 :tc1 tc2 2.1 00.1 07.1 6-5-4 7-8-9 A810-SJM :tc1 tc1 2.1 00.1 00.1 3-2-1 01-11-21 :tc1 tc2 2.1 00.1 08.1 6-5-4 7-8-9 A910-SJM :1 tc51.1 2.1 00.1 02.1 01-21 3-2-1 :tc1 tc2 2.1 00.1 00.2 6-5-4 7-8-9 B120-SJM :tc1 tc14.1 2.1 04.1 02.1 01-11-21 3-2-1 :tc1 tc14.1 2.1 04.1 02.1 7-8-9 6-5-4 A320-SJM :tc1 tc51.1 6.1 02.1 04.1 01-11-21 3-2-1 :tc1 tc1 6.1 02.1 02.1 6-5-4 7-8-9 A420-SJM :tc1 tc1 2.1 00.1 00.1 3-2-1 01-11-21 :tc1 tc1 2.1 00.1 00.1 6-5-4 7-8-9 A520-SJM :1 62.1/1 2.1 00.1 01.1 01-21 3-2-1 :tc1 tc2 2.1 00.1 07.1 6-4 7-8-9 C720-SJM :1 tc2 6.1 01.1 01.1 3-1 01-11-21 :2 1 6.1 01.1 07.0 6-4 7-9 D820-SJM :tc1 tc2 2.1 07.0 02.1 01-11-21 3-2-1 1 tc63.1: 2.1 07.0 09.0 6-4 7-8-9 E920-JSM :tc1 1 7.0 52.0 08.0 3-2-1 01-21 :1 tc63.1 7.0 05.0 04.0 7-9 6-5-4 G030-JSM 1 tc2: 2.1 07.0 02.1 01-21 3-2-1 :1 tc41.1 2.1 07.0 09.0 6-4 7-8-9 C130-SJM :tc1 tc2 2.1 07.0 02.1 3-2-1 01-11-21 :1 1 2.1 07.0 07.0 6-5 7-8 F630-JSM :tc1 tc2 2.1 07.0 01.1 01-11-21 3-2-1 :1 tc80.1 2.1 07.0 09.0 6-4 7-8-9 E730-JSM :1 62.1/1 5.1 08.0 00.1 01-21 3-2-1 :1 62.1/1 5.1 08.0 00.1 7-9 6-5-4 G

D1

34

6

12

11

10 9

7

F1

2

35

6

12

11

10 8

7

G1

2

34

5

6

12

10 9

7

THE TALEMA GROUP • Magnetic Components for Universal Applications

Surface Coplanarity will be 0.004(0.10) maximum


0° -

8°

0.189(4.80)

0.236(6.00) 0.020 x 0.12

(0.50 x 0.30)

0.669 (17.00)

0.598(15.20)

0.085(2.15)

0.472(13.00)

TALEMA INWK/YR

Part Number

0.500 (12.70)

Features• SMD design ideal for pick and place compatability

while providing unrivaled coplanarity• common mode choke included on both Tx and Rx channels

for optimum EMI performance• controlled parameters ensure full compliance with

ITU-TG.703 when matched with recommended IC• manufactured in an ISO-9001:2000, TS-16949:2002


level J-STD-020C


Package Schematic


0.118(3.00)

0.640(16.25)

0.050(1.27)

0.500(12.70)

Suggested PadLayout A

1

2

3

4

5

6

12

11

10

9

8

7


8

slennahCxR&xTnosekohCedoMnommoChtiwsremrofsnarTlauD-seireSSJM

traPrebmuN

I-remrofsnarT II-remrofsnarTsnruToitaR

%2-/+

LCOHm()niM

LLHμ(

)xaM

C WWFp(

)xaM

)smhO(RCD .irPsniP

.ceSsniP

snruToitaR

%2-/+

LCOHm()niM

LLHμ(

)xaM

C WWFp(

)xaM

)smhO(RCD .irPsniP


A010-SJM :tc1 tc63.1 2.1 06.0 03 08.0 01.1 3-1 01-21 :tc1 tc63.1 2.1 06.0 03 08.0 01.1 6-4 7-9

A310-SJM :tc1 tc51.1 2.1 06.0 53 08.0 59.0 3-1 01-21 :tc1 tc51.1 2.1 06.0 53 08.0 59.0 6-4 7-9

A410-SJM :tc1 tc51.1 2.1 06.0 53 09.0 50.1 3-1 01-21 :tc1 tc1 2.1 06.0 53 09.0 09.0 6-4 7-9

A510-SJM :tc1 tc3.2 2.1 06.0 52 06.0 04.1 3-1 01-21 :tc1 tc2 2.1 06.0 52 06.0 02.1 6-4 7-9

A710-SJM :tc1 tc2 2.1 06.0 52 06.0 02.1 3-1 01-21 :tc1 tc2 2.1 06.0 52 06.0 02.1 6-4 7-9

A810-SJM :tc1 tc1 2.1 06.0 53 09.0 09.0 3-1 01-21 :tc1 tc2 2.1 06.0 53 09.0 08.1 6-4 7-9

A910-SJM :tc1 tc51.1 2.1 06.0 53 08.0 59.0 3-1 01-21 :tc1 tc2 2.1 06.0 53 08.0 06.11 6-4 7-9

A120-SJM :tc1 tc14.1 2.1 06.0 03 07.0 00.1 3-1 01-21 :tc1 tc14.1 2.1 06.0 03 07.0 00.1 6-4 7-9

A420-SJM :tc1 tc24.2 2.1 06.0 52 06.0 05.1 3-1 01-21 :tc1 tc24.2 2.1 06.0 52 06.0 05.1 6-4 7-9

A520-SJM tc1 tc62.1: 2.1 06.0 03 08.0 00.1 3-1 01-21 :tc1 tc2 2.1 06.0 03 08.0 06.1 6-4 7-9

A820-SJM :tc1 tc2 2.1 06.0 03 07.0 02.1 3-1 01-21 tc1 tc63.1: 2.1 06.0 03 07.0 09.0 6-4 7-9

A130-SJM :tc1 tc1 2.1 06.0 53 09.0 09.0 3-1 01-21 :tc1 tc63.1 2.1 06.0 53 09.0 02.1 6-4 7-9

A230-SJM :tc1 tc4.2 2.1 06.0 53 09.0 01.2 3-1 01-21 :tc1 tc1 2.1 06.0 53 09.0 09.0 6-4 7-9

A640-SJM tc1:tc1 2.1 06.0 53 09.0 09.0 3-1 01-21 tc1:tc1 2.1 06.0 53 09.0 09.0 6-4 7-9

Features• industry standard through-hole footprints• wide range compatible with all common transceiver IC's• controlled parameters ensure full compliance with


and ISO-14001:2004 certified Talema facility• 1500Vrms minimum isolation voltage• extended operating temperature: -40° to +85°C• fully RoHS compliant


IS2M Series Schematic

Note: Unused pins not provided

E1/T1/ PRI/CEPT Single Transformers


0.400(10.16)

.250(6.35)

.150(3.81)

.200(5.08)

3 4

2 5

1 6

.350(8.89)

.500(12.70)

F

1

6

ICLine3

4

E

32

1

ICLine4

5

6

A

65

4

ICLine1

2

3

B1

2

3

ICLine6

4

C

6

5

4

ICLine

1

3

sremrofsnarTseireSM2SI

rebmuNtraP oitaRsnruT%5±

LCO).niMHm(

LL).xaMHμ(

irPRCD)smhO(

ceSRCD)smhO(

VP)smrV(

yramirPsniP citamehcS

6-M2SI :tc1 tc2 2.1 5.0 7.0 2.1 0051 3-1 A

7-M2SI :1 tc2 2.1 5.0 7.0 2.1 0051 4-6 B

8-M2SI :1 tc51.1 5.1 6.0 7.0 9.0 0051 4-6 B

01-M2SI :1 tc63.1 2.1 8.0 5.0 8.0 0051 3-1 C

11-M2SI :1 tc3.2 2.1 8.0 7.0 4.1 0051 3-1 C

21-M2SI 1 62.1/1: 5.1 5.0 7.0 9.0 0051 4-6 B

51-M2SI :tc1 1 2.1 5.0 7.0 7.0 0051 3-1 D

61-M2SI :1 tc5.1 2.1 6.0 7.0 0.1 0051 4-6 B

71-M2SI :1 35.1 2.1 8.0 5.0 0.1 0051 4-3 F

81-M2SI :1 581.1 2.1 5.0 7.0 8.0 0051 4-3 F

91-M2SI :tc1 tc2 2.1 0.1 0.1 0.2 0051 4-6 E

02-M2SI :tc1 tc1 2.1 0.1 0.1 0.1 0051 3-1 A

12-M2SI :1 tc51.1 5.1 0.1 0.1 0.1 0051 4-6 B32-M2SI :1 tc41.1 2.1 0.1 7.0 8.0 0051 3-1 C42-M2SI :1 1 2.1 5.0 7.0 7.0 0051 6-1 F

52-M2SI :1 63.1 2.1 8.0 7.0 9.0 0051 4-3 F

62-M2SI :tc1 tc3 2.1 8.0 7.0 1.2 0051 3-1 A

72-M2SI :1 tc385.1 2.1 6.0 7.0 0.1 0051 4-6 B

G4

3

5261

D

6

4

ICLine1

2

3

9


10

Features• low cost SMD for pick and place compatability while providing

consistent and reliable coplanarity• low leakage inductance• manufactured in an ISO-9001:2000, TS-16949:2002

and ISO-14001:2004 certified Talema facility• fully RoHS compliant and meets lead free reflow

level J-STD-020C

Electrical SpecificationsRatings@ 25°C ambientMinimum isolation voltage: 1500 VrmsExtended Operating Temperature Range: -40° to +85°C

SchematicMJE


MJE Series • T1/E1/CEPT/ISDN-PRI SMD Transformers


Electrical Specifications @ 25°C

Surface coplanarity will be 0.004 (0.01) maximum

sremrofsnarTDMSIRP-NDSI/TPEC/1E/1T•seireSEJMC°58+otC°04-egnaRerutarepmeTgnitarepOdednetxE

traPrebmuN

LCOyramirP

)niMHm(

oitaRsnruTceS/irP

%2±

C WWceS/irP

)xaMFp(

LL)xaMHμ(

)smhO(RCD VP)smrV(

yramirPsniP

citamehcS.irP .ceS

A01-EJM 2.1 tc63.1:tc1 03 002.0 08.0 01.1 0051 3-1 AB21-EJM 2.1 62.1/1:1 53 052.0 08.0 00.1 0051 3-1 BA02-EJM 2.1 tc1:tc1 53 002.0 09.0 09.0 0051 3-1 A

0.100(2.54)

0.374 (9.50)

0.453 (11.50)

TALEMA INW K / Y R

Par tNumber

0.307(7.80)

Suggested PadLayout

0.287(7.30)

0.047(1.20)

0.200(5.08)

0.492(12.50)

0.283(7.20)

0.244 (6.20)

0.020 x 0.12(0.50 x 0.30)

0° -

8°

A6

5

4

1

2

3

B1

3

6

5

4






11



Features• SMD design ideal for pick and place compatability while

providing unrivaled coplanarity• controlled parameters ensure full compliance with



level J-STD-020C


sremrofsnarTtroPlauD-seireSJGM

traPrebmuN

timsnarT-remrofsnarT evieceR-remrofsnarT

citamehcSsnruToitaR

%2-/+

LPHm()niM

R UC )smhO( yramirPsniP

snruToitaR

%2-/+

LPHm()niM

R UC )smhO(sniPyramirP

.irP .ceS .irP .ceS

A001-JGM :tc1 c24.2 t 2.1 93.0 49.0 21-01&6-4 :tc1 tc24.2 2.1 93.0 49.0 9-7&3-1 AA101-JGM :tc1 tc2 2.1 93.0 77.0 21-01&6-4 :tc1 tc1 2.1 93.0 93.0 61-81&22-42 AA201-JGM tc1 c51.1: t 2.1 93.0 44.0 21-01&5-4 :tc1 tc51.1 2.1 93.0 44.0 21-01&3-1 AA301-JGM :tc1 tc2 2.1 93.0 77.0 21-01&6-4 :tc1 c2 t 2.1 93.0 77.0 9-7&3-1 AA401-JGM :tc1 tc3.2 2.1 93.0 09.0 21-01&6-4 :tc1 tc1 2.1 93.0 93.0 61-81&22-42 AA501-JGM :tc1 tc63.1 2.1 93.0 35.0 21-01&6-4 :tc1 tc2 2.1 93.0 77.0 61-81&22-42 AA601-JGM :tc1 tc63.1 2.1 93.0 35.0 21-01&6-4 :tc1 tc1 2.1 93.0 93.0 61-81&22-42 AA701-JGM :tc1 tc51.1 2.1 93.0 44.0 21-01&6-4 :tc1 tc2 2.1 93.0 77.0 9-7&3-1 AB801-JGM :tc1 tc4.2 2.1 93.0 49.0 21-01&3-1 :tc1 tc1 2.1 93.0 93.0 61-81&91-12 BB901-JGM :tc1 tc14.1 2.1 93.0 85.0 21-01&3-1 :tc1 tc14.1 2.1 93.0 85.0 61-81&91-12 BB011-JGM :tc1 tc2 2.1 93.0 77.0 21-01&3-1 :tc1 tc2 2.1 93.0 77.0 61-81&91-12 B

0.689(17.50)

0.630(16,00)

0.551(14,00)

0.550(13.97)

11 x

0.05(1,27) 0.069(1.765)

TALEMA INWK / YR

Part Number

0° -

8°

0.228(5,80) .020 x .012

(0.50 x0.30)

0.091(2.30)

0.030(0.77)

0.550(13.97)

0.661(16.80)

Suggested PadLayout

DimensionsSchematics

A1

2

3

4

5

6

7

8

9

10

11

12

24

23

22

21

20

19

18

17

16

15

14

13

Transmit

Receive

Transmit

Receive

B1

2

3

4

5

6

7

8

9

10

11

12

24

23

22

21

20

19

18

17

16

15

14

13

Transmit

Receive

Transmit

Receive

Surface Coplanarity will be 0.004(0.10) maximumDimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise


12

Notes:1. Dallas IC’s use either a 1:1,15 or a 1:1.36 ratio transformer depending on the application. Consult the Dallas application notes or contact Talema.2. P/N MJQ-007-J - To obtain a 1:1 secondary ratio connect the following secondary contacts: 40-39, 35-34, 30-29 and 25-24; a secondary ratio of 1:1.26 is obtained by connecting contacts: 40-38, 35-33, 30-28 and 25-23.


stroPdauQIRP-NDSI/TPEC/1E/1TrofediuGnoitceleSremrofsnarT-CI

CIrerutcafunaM

CIrebmuNtraP noitacilppA

oitaRsnruT%2±ceS:irP amelaT

rebmuNtraPtimsnarT evieceR

deepsdniM)tnaxenoC(

0158TB 1E/1T 62.1/1:1 TC2:1 04-700-QJM0838NC TC2:1 2:TC1 04-020-QJM

6738TB,5738TB,0738TB IRretteB TC63.1:1 TC2:1 04-100-QJM6738TB,5738TB,0738TB rewoPwoL 51.1:1 TC2:1 04-200-QJM

cigoLsurriC)latsyrC(

81316 1E021 TC2:1 TC1:1 04-300-QJM77516 1E/1T TC2:1 TC2:1 04-600-QJM

57/A745/A535/A5/A40316 1T 51.1:1 TC2:1 04-200-QJM57/A745/A535/A5/A40316 1E57 TC2:1 TC1:1 04-300-QJM57/A745/A535/A5/A40316 1E021 62.1/1:1 TC2:1 04-700-QJM

38516,28516 41.1:1 TC41.1:1 04-900-QJM18516,01316 TC2:1 TC1:1 04-300-QJM

18816 51.1:1 TC2:1 04-200-QJMA48516,48516 3QI TC2:1 TC2:1 04-600-QJM

A38516,38516,28516,48516 5QI 41.1:1 TC41.1:1 04-900-QJM

mixaM)sallaD(

6912SD TC2:1 TC1:1 04-300-QJM4512SD,3512SD,2512SD,1512SD 51.1:1 TC2:1 04-200-QJM4512SD,3512SD,2512SD,1512SD TC63.1:1 TC2:1 04-100-SJM

84Q12SD,8412SD V3 TC2:1 TC1:1 04-300-QJM84Q12SD,8412SD V5 TC63.1:1 TC2:1 04-100-QJM

453Q12SD,45312SD,253Q12SD,25312SD TC2:1 TC1:1 04-300-QJM455Q12SD,45512SD,255Q12SD,25512SD 51.1:1 TC2:1 04-200-QJM455Q12SD,45512SD,255Q12SD,25512SD TC63.1:1 TC2:1 04-100-QJM

raxE

7995T,7985T,4985T,19L95,A3865T - TC2:1 TC2:1 04-600-QJM5995T,4995T,3995T,1975T 62.1/1:1 TC2:1 04-700-QJM

02D28,42L28,72L18,8827T,4865T TC63.1:1 TC2:1 04-100-QJM83L38,43L38,03L38 TC2:1 TC2:1 04-600-QJM

noenifnI)snemeiS(

5522BEP,4522BEP 1J/1T/1E 14.1:TC1 14.1:TC1 04-610-QJM45522BEP,40522BEP V3.3 4.2:1 1:1 04-220-QJM

40522BEP V5 5.1:1 1:14.1 04-620-QJM6522BEP 1J/1T/1EV3.3 4.2:1 1:1 04-220-QJM

letnI)enOleveL(

103TXL,003TXL - TC2:1 TC2:1 04-600-QJM703TXL,503TXL,403TXL 1T/1E TC2:1 TC2:1 04-600-QJM703TXL,503TXL,403TXL 1T 51.1:1 TC2:1 04-200-QJM703TXL,503TXL,403TXL 1E021,1E57 62.1/1:1 TC2:1 04-700-QJM813TXL,713TXL,013TXL TC2:1 TC1:1 04-300-QJM

133TXL 1T/1E TC2:1 TC1:1 04-300-QJM233TXL,133TXL TC2:1 TC2:1 04-600-QJM233TXL,133TXL 51.1:1 TC2:1 04-200-QJM533TXL,433TXL 1T/1E TC2:1 TC2:1 04-600-QJM533TXL,433TXL 1E57/021 TC63.1:1 TC2:1 04-100-QJM533TXL,433TXL 1E57 62.1/1:1 TC2:1 04-700-QJM

633TXL TC2:1 TC2:1 04-600-QJM953TXL,153TXL,053TXL 1T/1E TC2:1 TC1:1 04-300-QJM

153TXL,053TXL 51.1:1 TC2:1 04-200-QJM363TXL,263TXL,163TXL,063TXL 1E/1T TC2:1 TC1:1 04-300-QJM363TXL,263TXL,163TXL,063TXL 51.1:1 TC2:1 04-200-QJM

883/683/483/183/083TXL 1E/1T TC2:1 TC1:1 04-300-QJM883/683/483/183/083TXL 1E/1T TC2:1 2:TC1 04-020-QJM

8013TXL,4013TXL TC2:1 TC1:1 04-300-QJM

tnecuL

A0927T,8827T TPEC TC63.1:1 TC2:1 04-100-QJMA9827T 1SD 51.1:1 TC2:1 04-200-QJM

8967T,0967T,8867T TPEC 63.1:1 TC63.1:1 04-210-QJM8967T,0967T,8867T 1SD 41.1:1 TC41.1:1 04-900-QJM

7967T,3967T TPEC 24.2:1 24.2:1 04-820-QJM1C40UILT 1SD 41.1:1 TC41.1:1 04-900-QJM1C40UILT TPEC 63.1:1 TC63.1:1 04-210-QJM

knilraZ)letiM(

6709TM,1709TM 24.2:1 24.2:1 04-820-QJM6709TM,5709TM 4.2:1 1:1 04-220-QJM5709TM,4709TM TC2:1 TC1:1 04-300-QJM

arreiS-CMP4134MP,1436MP,1434MP - TC63.1:1 TC2:1 04-100-QJM

8134MP - TC2:1 TC2:1 04-600-QJM4534MP,1534MP temoC 24.2:1 24.2:1 04-820-QJM

13

Features• designed for optimum compatability with all established

interface IC’s - see listing on last page• module contains eight transformers for Quad T1/E1 Ports• SMD design provides consistent and reliable

coplanarity - fully pick and place compatable• controlled parameters ensure full compliance with


and ISO-14001:2004 certified Talema facility• 1500Vrms minimum isolation voltage• extended operating temperature: -40° to +85°C


MJQ Series • T1/CEPT/E1/PRI Transformer Modules for Quad Ports

• fully RoHS compliant and meets lead free reflow levelJ-STD-020C


stroP1E/1TdauQrofseludoMremrofsnarTQJM

traPrebmuN remrofsnarT oitaRsnruT

)%2-/+ceS:irP(LCO

).niMHm(LL

)xaMHμ(C WW

xaMFp( )RCD )smhOm( sniP

citamehcSirP ceS yramirP yradnoceS

04-100-QJMtimsnarT :1 TC63.1 2.1 6.0 53 093 055 04-93,53-43,03-92,52-42 3-1,8-6,31-11,81-61

CevieceR :1 TC2 2.1 6.0 53 093 087 02-91,51-41,01-9,5-4 32-12,82-62,33-13,83-63

04-200-QJMtimsnarT :1 51.1 2.1 6.0 53 093 054 71-61,21-11,7-6,2-1 52-42,03-92,53-43,04-93

AevieceR :1 TC2 2.1 6.0 53 093 087 83-63,33-13,82-62,32-12 5-3,01-8,51-31,02-81

04-300-QJMtimsnarT :1 TC2 2.1 6.0 53 093 087 71-61,21-11,7-6,2-1 52-32,03-82,53-33,04-83

BevieceR :1 TC1 2.1 6.0 53 093 093 73-63,23-13,72-62,22-12 5-3,01-8,51-31,02-81

04-600-QJMtimsnarT :1 TC2 2.1 6.0 53 093 087 02-91,51-41,01-9,5-4 32-12,82-62,33-13,83-63

CevieceR :1 TC2 2.1 6.0 53 093 087 04-93,53-43,03-92,52-42 3-1,8-6,31-11,81-61

04-700-QJMtimsnarT :1 62.1/1 2.1 6.0 53 093 094 71-61,21-11,7-6,2-1 52-32,03-82,53-33,04-83

BevieceR :1 TC2 2.1 6.0 53 093 087 73-63,23-13,72-62,22-12 5-3,01-8,51-31,02-81

04-900-QJMtimsnarT :1 41.1 2.1 6.0 53 093 044 71-61,21-11,7-6,2-1 52-42,03-92,53-43.04-93

AevieceR :1 TC41.1 2.1 6.0 53 093 044 32-12,82-62,33-13,83-63 02-81,51-31,01-8,5-3

04-210-QJMtimsnarT :1 63.1 2.1 4.0 02 093 045 71-61,21-11,7-6,2-1 52-42,03-92,53-43.04-93

AevieceR :1 TC63.1 2.1 5.0 02 093 045 32-12,82-62,33-13,83-63 02-81,51-31,01-8,5-3

04-510-QJMtimsnarT :1 51.1 2.1 6.0 53 093 054 81-61,31-11,8-6,3-1 52-32,03-82,53-33,04-83

EevieceR :1 51.1 2.1 6.0 53 093 054 02-91,51-41,01-9,5-4 22-12,72-62,23-13,73-63

04-610-QJMtimsnarT :TC1 14.1 2.1 6.0 53 024 085 81-61,31-11,8-6,3-1 52-42,03-92,53-43,04-93

CevieceR :TC1 14.1 2.1 6.0 53 024 085 83-63,33-13,82-62,32-12 5-4,01-9,51-41,02-91

04-710-QJMtimsnarT :1 2 2.1 6.0 53 093 087 81-61,31-11,8-6,3-1 52-32,03-82,53-33,04-83

EevieceR :1 2 2.1 6.0 53 093 087 02-91,51-41,01-9,5-4 22-12,72-62,23-13,73-63

04-020-QJMtimsnarT :1 TC2 2.1 6.0 53 093 087 02-91,51-41,01-9,5-4 32-12,82-62,33-13,83-63

CevieceR :TC1 2 2.1 6.0 53 093 087 81-61,31-11,8-6,3-1 52-42,03-92,53-43,04-93

04-120-QJMtimsnarT :1 2 2.1 6.0 53 093 087 02-91,21-11,01-9,2-1 22-12,03-92,23-13,04-93

DevieceR :1 TC2 2.1 6.0 53 093 087 83-63,53-33,82-62,52-32 5-3,8-6,51-31,81-61

04-220-QJMtimsnarT :1 4.2 0.1 5.0 53 093 093 91-81,21-11,9-8,2-1 32-22,03-92,33-23,04-93

FevieceR :1 1 0.1 5.0 53 014 009 83-73,53-43,82-72,52-42 4-3,7-6,41-31,71-61

04-320-QJMtimsnarT :1 07.1 2.1 8.0 53 093 076 71-61,21-11,7-6,2-1 52-42,03-92,53-43.04-93

AevieceR :1 TC63.1 2.1 6.0 53 093 045 83-63,33-13,82-62,32-12 5-3,01-8,51-31,02-81

04-420-QJMtimsnarT :1 TC63.1 2.1 6.0 53 093 045 04-93,53-43,03-92,52-42 3-1,8-6,31-11,81-61

CevieceR 1 TC1: 2.1 6.0 53 093 093 02-91,51-41,01-9,5-4 32-12,82-62,33-13,83-63

04-620-QJMtimsnarT :1 5.1 0.1 5.0 53 093 085 91-81,21-11,9-8,2-1 32-22,03-92,33-23,04-93

FevieceR :14.1 1 0.1 5.0 53 093 093 83-73,53-43,82-72,52-42 4-3,7-6,41-31,71-61

04-820-QJMtimsnarT :1 24.2 2.1 60 53 093 049 81-61,31-11,8-6,3-1 52-32,03-82,53-33,04-83

EevieceR :1 24.2 2.1 6.0 53 093 049 02-91,51-41,01-9,5-4 22-12,72-62,23-13,73-63

04-920-QJMtimsnarT :1 TC1.2 2.1 6.0 53 093 018 71-61,21-11,7-6,2-1 52-32,03-82,53-33,04-83

BevieceR :1 TC1.2 6.0 6.0 53 082 095 73-63,23-13,72-62,22-12 5-3,01-8,51-31,02-81

04-030-QJMtimsnarT :1 TC54.2 2.1 6.0 53 093 069 71-61,21-11,7-6,2-1 52-32,03-82,53-33,04-83

BevieceR :1 TC54.2 6.0 6.0 53 082 096 73-63,23-13,72-62,22-12 5-3,01-8,51-31,02-81

04-130-QJMtimsnarT :1 4.2/2 0.1 0.1 53 014 009 02-91,21-11,01-9,2-1 12-32,82-03,13-33,04-83

GevieceR :1 1/97.0 0.1 0.1 53 093 093 42-52,62-72,43-53,63-73 81-61,51-31,8-6,5-3

14


MJQ Series Quad Module Package


Packaging & Dimensions for SMD Quad Port Transformer Modules

Schematics

Weight: ~5 grams

Surface coplanarity will be <0.004 (0.10)

Suggested Pad Layout

0.950(24,13)

0.030(0,77)

0.091(2,30)

19 x 0.050(19 x 1,27)

0.480(12,20)

0.661(16,80)

0° -

8°

0.236(6.00)

0.189(4.80)

1.102 (28.00)

0.638(16.20)

0.076(1.93)

0.575(14.60)

19 x 0.05 (1,27)

0.020(0.50)

TALEMA INWK/YR

Part Number

A

1

2 3 4 5 6

7 8 91011

1213141516

17181920

40

3938

3635

3433

3130

2928

2625

2423

21

B

1

2 3 4 5 6

7 8 91011

1213141516

17181920

40393837

3635343332

3130292827

2625242322

21

C

1 2 3 4

5 6 7 8 9

1011121314

1516171819

20

40

3938373635

3433323130

2928272625

24232221

1

2 3 4 5 6 7 8 9

1011

1213141516171819

20

40

3938

3635

3332

3130

2928

2625

2322

21

D

1

3 4

5 6

8 9

10 11

13 14

1516

1819

20

40

3837

3635

3332

3130

2827

2625

2322

21

E F

1

2 3

4 6

7 8

9 11

12 13

1416

1718

19

40

3938

3735

3433

3230

2928

2725

2423

22

G

1

2 3 4 5 6 7 8 9

1011

1213141516171819

20

40393837

3635

3433323130292827

2625

24232221






15

Features• module contains eight transformers for Quad T1/E1 Ports• SMD design provides consistent and reliable

coplanarity - fully pick and place compatable• controlled parameters ensure full compliance with

ITU-T G.703 when matched with recommended IC• manufactured in an ISO-9001:2000, TS-16949:2002


level J-STD-020C


T1/E1 Octal 75/120 Ohm Matching Transformer Module

stroP1E/1TdauQrofeludoMremrofsnarTgnihctaMmhO021/57thgiE

C°58+ot°04-:egnaRerutarepmeTgnitarepOdednetxE

traPrebmuN

remrofsnarToitaRsnruT

)%2-/+ceS:irP(LCO

).niMHm(LL

)xaMHμ(C WW

)xaMFp()smhOm(RCD sniP

irP ceS yradnoceS:yramirP

26302

mhO57/021-XTeniL:pihC4.2/9.1:1

0.1 8.0 05 9.0 4.1

)04-24(/)14-24(:)9-7(,)64-84(/)74-84(:)3:1()82-03(/)92-03(:)12-91(,)43-63(/)53-63(:)51-31(

mhO021-XRpihC:eniL

9.1:1)21-01(:)73-93(,)6-4(:)34-54(

)42-22(:)52-72(,)81-61(:)13-33(

mhO57-XRpihC:eniL

4.2:1)21-01(:)83-93(,)6-4(:)44-54(

)42-22(:)62-72(,)81-61(:)23-33(


Quad Module Package

Weight: ~ 8 grams

Surface coplanarity will be <0.004 (0.10)

Suggested Pad Layout

0.305(7.75)

0.258(6.55)

1.150(29.21)

0.030(0,77)

0.110(2.80)

23 x 0.050(23 x 1,27)

0.650(16.50)

0.870(22.10)

1.254 (31.85)

0.831(21.10)

0.076(1.93)

0.752(19.10)

46 x 0.05 (1.27)

0.020(0.50)

TALEMA INWK/YR

Part Number

Tx

Tx

Tx

Tx

Rx

Rx

Rx

Rx

Schematic

1 2 3 4

6 7 8 910

1213141516

1819202122

24

484746454443424140393837363534333231302928272625

Chip Line


16

These transformers are typical for 75 ohm bandwidth appli-cations requiring a very fast rise times

Talema manufactures a wide range of transmit and receivetransformers for T3/DS3 applications using bit rates of 44.736Mbps. These transformers can also be used with E3 interfacesat 34.368 Mbps and STS-1 applications at 51.84 Mbps. Alisting of IC’s with recommended Talema transformers is listedon the following cross reference chart.

Quality and consistency is guaranteed through 100% testingof the specified parameters for Primary Inductance, LeakageInductance, Turns Ratio, DC resistance and InterwindingCapacitance. This ensures that the Return Loss and PulseWaveshape requirements of CCITT G.703 and ATT T.A.34 canbe met. Additionally all parts are 100% tested for 1500Vminimum isolation.

Temperature PerformanceProducts are offered with extended temperature ( -40° to 85°C) as standard. Required minimum inductance levels are main-tained at the lower temperature limits.

IC • T3 / DS3 / E3 / STS-1 Transformer Selection Guide

ENVIRONMENTAll TALEMA International Groupmanufacturing facilities are RoHScompliant and chokes, inductors and HFcomponents are produced in an EMSfacility certified to ISO-14001:2004.


ediuGecnerefeRssorCremrofsnarTecafretnI1-STS/3E/3SD/3T-CI

CIrerutcafunaM

CIrebmuNtraP

rebmuNtraPremrofsnarTamelaTremrofsnarTDMSelgniS DMSlauD DMStroP-irT

erutarepmeTdradnatS erutarepmeTdednetxE erutarepmeTdednetxEtimsnarT evieceR timsnarT evieceR XR&XT XR&XT

tnaxenoC)llewkcoR( 3338NC,2338NC,1338NC A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD -- --

noenifnI)snemeiS( 0643BEP,2543BEP -- -- E6-04-EJD A6-001-EJD -- --

tnecuL 6927T A6-04-EJD -- A6-001-EJD -- -- --

raxE

xxx57TRX A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD 001-MTD21/6/4/3/2/00L37TRX A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD 001-MTD

21R,A40/A30CL37TRX A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD 001-MTD2037TRX,0037TRX A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD 001-MTD

mixaM( )sallaD

4/3/2/1813SD B6-91-EJD B6-91-EJD D6-04-EJD D6-04-EJD -- --4/3/2/1/0513SD B6-91-EJD B6-91-EJD D6-04-EJD D6-04-EJD -- --

deepsdniM)tnaxenoC(

33382NC,23382NC,13382NC A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD 001-MTD65382M,53382M A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD 001-MTD

45382M,35382M,25382M A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD 001-MTD

KDT

B1422P87 B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --4422P87,3422P87,2422P87 B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --

L0027P87,0027P87 B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --L4027P87,L3027P87 B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --

2632P87,1632P87 B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --

hctiwsnarT

1E,05020-CXTTRM B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --02020-CXTTRA A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD --

12020-CXTETRA A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD --3SD,0302-CXTTRAD A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD --

3E,0302-CXTTRAD B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --G35102-CXTNS-MIL3SD A6-04-EJD A6-04-EJD A6-001-EJD A6-001-EJD B001-MJD --

36102-CXTMIL3E B6-91-EJD A6-04-EJD D6-04-EJD A6-001-EJD D/C001-MJD --

17




level J-STD-020C


SchematicsDJE-XXX-6X


These miniature transformers are typical for 75 ohmbandwidth applications requiring a very fast rise times

DJE Series • T3/DS3/E3/STS-1 Interface Transformers



Test ConditionsInductance measured @ 1MHz, 10mVInterwinding Capacitance @ 100kHz/10mVLeakage Inductance @ 100kHz/10mV

0.283(7.20)

0.244 (6.20)

0.020 x 0.12(0.50 x 0.30)

0.100(2.54)

0.374 (9.50)

0.453 (11.50)

TALEMA INW K / Y R

Par tNumber

0.307(7.80) 0°

- 8°

Suggested PadLayout

0.287(7.30)

0.047(1.20)

0.200(5.08)

0.492(12.50)

A B C3

1

4

6

3

1

4

6

3

1

4

5

6

D4

6

3

2

1

E3

2

1

4

5

6






sremrofsnarTecafretnIdnabediWDMS•seireSEJD

C°58+otC°04-egnaRerutarepmeTgnitarepOdednetxE

rebmuNtraPLCO

yramirP)niMHμ(

LCOyramirPC°04-@)niMHμ(

snruToitaRceS/irP

%2±

LLceS/irP

)xaMHμ(

CCceS/irP

)xaMFp(

smhO57htdiwdnaB noitalosIegatloV

)niMsmrV(

yramirPsniP

citamehcS)zHM(.qerF

woL hgiH

B6-91-EJD 91 -- TC2:1 60.0 01 052.0 005 0051 3-1 BA6-04-EJD 04 -- 1:1 01.0 01 002.0 043 0051 3-1 AB6-04-EJD 04 02 TC2:1 11.0 21 052. 005 0051 3-1 BD6-04-EJD 04 02 TC2:1 11.0 21 052. 005 0051 6-4 DE6-04-EJD 04 02 TC1:TC1 01.0 01 052. 043 0051 3-1 ED6-54-EJD 04 02 TC551.1:1 51.0 21 002. 043 0051 6-4 D

A6-001-EJD 001 04 1:1 11.0 01 002. 043 0051 3-1 A

18




level J-STD-020C


Schematics


These miniature modules contain both transmit and receivetransformers designed for use in in T3/DS3 applications usingbit rates off 44.736Mbps, E3 interfaces at 34.368Mbps andSTS-1 applications at 51.84 Mbps The transformers are typicalfor 75 ohm bandwidth applications requiring a very fast risetimes.

DJM Series • T3/DS3/E3/STS-1 Dual Interface Transformers


DJM Dimensions

0° -

8°

0.079(2.00)

0.394(10.60)

0.028(0.70)

0.050(1.27)

0.350(8.89)

Suggested PadLayout

0.378(9.60)

0.504(12.80)

0.077 (1.96)

0.346(8.80)

TALEMA INWK/YR

Part Number

0.350(8.89)

C16

14

11

9

1

2

3

6

8

A16

15

10

9

1

2

7

8

B16

15

11

10

9

1

2

6

7

8

D16

15

11

10

9

1

2

7

8

E16

14

11

9

1

2

3

6

7

8


sremrofsnarTecafretnIdnabediWDMSlauD•seireSMJD


traPrebmuN

oitaRsnruT%2±ceS/irP

yramirPLCO)niMHμ(

LL)xaMHμ(

C WW)xaMFp(

noitalosIegatloV

)niMsmrV(

yramirPsniP citamehcS

XT XR XT XR XT XR XT XR XT XRA001-MJD 1:1 1:1 04 04 01.0 01.0 01 01 0051 2-1 8-7 AB001-MJD tc1:tc1 1:1 001 001 11.0 11.0 01 01 0051 8-6 51-61 BC001-MJD tc2:1 1:1 04 001 11.0 11.0 21 01 0051 41-61 8-6 CD001-MJD tc2:1 1:1 001 001 21.0 11.0 21 01 0051 8-7 51-61 DE001-MJD tc2:1 tc2:1 04 04 11.0 11.0 21 21 0051 41-61 9-11 E

0.189(4.80)

0.236(6.00) 0.016 x 0.016

(0.40 x 0.40)

19





level J-STD-020C


These modules contain both transmit and receive transformersdesigned for use in in T3/DS3 applications using bit rates off44.736Mbps, E3 interfaces at 34.368Mbps and STS-1applications at 51.84 Mbps The transformers are typical for 75ohm bandwidth applications requiring a very fast rise times.

DTM Series • T3/DS3/E3/STS-1 Tri-Port Transformer Modules


seludoMremrofsnarTecafretnIdnabediWDMStroP-irT•seireSMTD


rebmuNtraPoitaRsnruT%2±ceS/irP

yramirPLCOC°52@

)niMHμ(

yramirPLCOC°04-@)niMHμ(

LL)xaMHμ(

C WW)xaMFp(

noitalosIegatloV

)niMsmrV(sniPyramirP

001-MTD 1:1 001 04 11.0 21 0051 21-11,01-9,8-7,6-5,4-3,2-1

DTM Dimensions

0.537(13.64)

0.583(14.80)

0.571(14.50)

0.440(11.18)

11 x 0.04(1.02) 0.052(1.31)

TALEMA INWK / YR

Part Nrumber

0.012 x 0.012(0.30 x 0.30)

0.240(6.10)

24 x

0.201(5.10)

Schematic

24

23

22

21

20

19

18

17

16

15

14

13

1

2

3

4

5

6

7

8

9

10

11

12

Suggested PadLayout

0.026(0.66)

0.091(2.30)

0.040(1.02)

0.442(11.22)

0.622(15.80)


Features• EMI noise suppression for data and signal line filtering• Miniature, low cost SMD common mode chokes are designed

for pick and place compatability while providing reliablecoplanarity

• High attenuation over a wide frequency range• Manufactured in an ISO-9001:2000, TS-16949:2002

and ISO-14001:2004 certified Talema facility• Other inductance values available TALEMA IN• fully RoHS compliant and meets lead free reflow

level J-STD-020C

SMD Data and Signal Line Filter Chokes

noisserppusIMEeniLlangiSdnaataDrofsekohCedoMnommoCerutainiM

rebmuNtraP)Hμ(LCO

%03±IN

)Am(RCD

)smhOm(rebmuNslioCfo

sgnidniWlioCrep

citamehcS rebmuNtraP)Hμ(LCO

%03±IN

)Am(RCD

)smhOm(rebmuNslioCfo

sgnidniWlioCrep

citamehcS

seniLataDowT seniLataDruoF011-2-JTC 11 003 061 1 2 A 033-4-JFC 33 055 56 1 4 A101-2-JTC 001 003 081 1 2 A 074-4-JFC 74 045 08 1 4 A174-2-JTC 074 002 083 1 2 A 101-4-JFC 001 063 061 1 4 A201-2-JTC 0001 051 066 1 2 A 174-4-JFC 074 063 56 1 4 A274-2-JTC 0074 051 0081 1 2 A 201-4-JFC 0001 003 58 1 4 A

011-2-JMC/JLC 11 005 021 1 2 A 274-4-JFC 0074 022 034 1 4 A074-2-JMC/JLC 74 005 051 1 2 A 062-4-JCC 62 006 56 1 4 B101-2-JMC/JLC 001 005 062 1 2 A 074-4-JCC 74 005 001 1 4 B174-2-JMC/JLC 074 005 052 1 2 A 101-4-JCC 001 004 031 1 4 B201-2-JMC/JLC 0001 005 052 1 2 A 122-4-JCC 022 004 091 1 4 B274-2-JMC/JLC 0074 002 548 1 2 A 174-4-JCC 074 004 021 1 4 B301-2-JMC/JLC 00001 002 0021 1 2 A 201-4-JCC 0001 053 091 1 4 B374-2-JMC/JLC 00074 001 0543 1 2 A 251-4-JCC 0051 053 021 1 4 B

201-2-JCC 0001 055 041 1 2 A 205-4-JCC 0005 033 022 1 4 B251-2-JCC 0051 055 001 1 2 A 321-4-JCC 00021 071 097 1 4 B205-2-JCC 0005 005 081 1 2 A 385-4-JCC 00085 09 0532 1 4 B321-2-JCC 00021 004 082 1 2 A382-2-JCC 00082 072 025 1 2 A B-0.1-JQC 0001 004 002 1 4 B305-2-JCC 00005 002 0201 1 2 A B-0.5-JQC 0005 003 054 1 4 B307-2-JCC 00007 071 0451 1 2 A B-01-JQC 00001 003 0601 1 4 B

A-0.1-JDC 0001 006 091 1 2 A B-85-JQC 00085 002 0042 1 4 BA-7.4-JDC 0074 053 575 1 2 A B-09-JQC 00009 051 0514 1 4 BA-21-JDC 00021 003 086 1 2 A E61-042-JUC 42 008 54 2 2 EA-82-JDC 00082 003 0201 1 2 A E61-101-JUC 001 054 531 2 2 EA-05-JDC 00005 003 0081 1 2 A E61-201-JUC 0001 054 531 2 2 EA-07-JDC 00007 003 0512 1 2 A E61-274-JUC 0074 003 013 2 2 E

seniLataDeerhT seniLataDxiS042-3-JFC 42 0001 54 1 3 A C61-042-JUC 42 056 54 2 3 C201-3-JFC 0001 007 07 1 3 A C61-101-JUC 001 053 011 2 3 C222-3-JFC 0022 006 521 1 3 A C61-201-JUC 0001 033 071 2 3 C274-3-JFC 0074 053 043 1 3 A C61-274-JUC 0074 002 034 3 2 D

seniLataDruoF seniLataDthgiE011-4-JMC/JLC 11 006 031 1 4 A A61-042-JUC 42 055 54 2 4 A074-4-JMC/JLC 74 005 081 1 4 A A61-101-JUC 001 052 042 2 4 A101-4-JMC/JLC 001 005 033 1 4 A A61-174-JUC 074 052 59 2 4 A174-4-JMC/JLC 074 005 042 1 4 A A61-274-JUC 0074 061 506 2 4 A201-4-JMC/JLC 0001 005 013 1 4 A seniLataDneetxiS274-4-JMC/JLC 0074 003 068 1 4 A 074-61-JOC 74 003 002 8 2 --321-4-JMC/JLC 00021 031 0032 1 4 A 205-61-JOC 0005 051 0091 8 2 --

Electrical Specifications @ 25°CNominal Voltage: 42Vac (50/60Hz), 80VdcOperating temperature: -40° to +85°C

Storage temperature: -40° to +125°CClimatic category: according to IEC68-1 25/85/56Test voltage between windings: 500 VrmsTest frequency: Inductance measured @ 100kHz / 20 mVrmsTest Equipment: HP4192A

20

THE TALEMA GROUP • Worldwide Toroidal Specialists

CFJ-3

CFJ-4

CCJ-2 / 4

CDJ / CQJ

0° - 8°

0.020(0.50)

0.200(5.08)

0.413(10.50) 0.461

(11.70)

0.100(2.54)

0.374 (9.50)

0.453 (11.50)

TALEMA INW K / Y R

Par tNumber

0.307(7.80)

3 x 0.100(3 x 2.54)

0.453 (11.50)

TALEMA INW K / Y R

Part Number

0.378(9.60)

0.374 (9.50)

0.287(7.30)

0.047(1.20)

0.200(5.08)

0.492(12.50)

0.047(1.20)

0.300(7.62)

0.492(12.50)

0.287(7.30)

0° - 8°

0.102(2.60)

0.047(1.20) 0.590

(15.00)

0.300(7.62)

SuggestedPad Layout

0.354(9.00)

0.315 (8.00)

0.020 x 0.12(0.50 x 0.30)

SuggestedPad Layout

0.400(10.16)

0.098 (2.50)

0.047(1.20) 0.709

(18.00)

CLJ-4

CLJ-2

CMJ-4

CMJ-2

0° -

8°

3 x 0.050(3 x 1.27)

0.031(0.80)

0.394(10.00)

Suggested PadLayout

0.213(5.40)

0.039(1.00)

0.100(2.54)

0.213(5.40)

0.394(10.00)

Suggested PadLayout

1 4

2 3

Schematic

A

CLJ

-2-

XX

XW

k/Y

r

0.100(2.54)

0.287 (7.30)

0.350 (8.90)

0.213(5.40)

0.020 x 0.012(0.50 x 0.30)

0.146 (3.70)

0.185(4.70)

0.150 (3.80)

0.189(4.80)

0.016 x 0.016(0.40 x 0.40)

0.287 (7.30)

0.350 (8.90)

3 x 0.050(3 x 1.27) 0.213

(5.40)

CLJ

-4-

XX

XW

k/Y

r

3 x 0.050(3 x 1.27)

0.028(0.70)

0.394(10.00)

Suggested PadLayout

0.197(5.00)

0.169 (4.30)

0.209(5.30)

0.020 x 0.012(0.50 x 0.30)

0.039(1.00)

0.100(2.54)

0.213(5.40)

0.394(10.00)

Suggested PadLayout

1 4

2 3

Schematic

A

0.100(2.54)

0.299 (7.60)

0.354 (9.00) C

MJ-

2-X

XX

Wk/

Yr

0.228(5.80)

0.169 (4.30)

0.209(5.30)

0.020 x 0.12(0.50 x 0.30)

0° -

8°

0.299 (7.60)

0.354 (9.00) C

MJ-

4-X

XX

Wk/

Yr

3 x 0.050(3 x 1.27) 0.228

(5.80)

Suggested PadLayout

0.130(3.30)

0.083 (2.10)

0.020 x 0.12(0.50 x 0.30)

0° -

8°

0.069(1.75)

0.050(1.27)

0.031(0.80)

0.236(6.00)0.050

(1.27)

0.177 (4.50)

0.197 (5.00)

0.130(3.30)

SE1

510

CTJ-2

Dimensions: Inches (Millimeters) Tolerance: ±0.010 (0.25) unless specified otherwiseSurface Coplanarity will be 0.004 (0.10) maximum

Packaging & Dimensions • SMD Data and Signal Line Filter Chokes

1 10

5 6

A1 10

2 9

4 7

5 6

B

1 8

4 5

A1 8

2 7

3 6

4 5

B

1 8

2 7

3 6

4 5

A

1 4

2 3

Schematic

A

Schematic

1 8

2 7

3 6

4 5

A

Schematic

1 8

2 7

3 6

4 5

A

1 6

2 5

3 4

A

0.433(11.00)

0.100(2.54)

0.300 (7.62)

0.472 (12.00)

0.551 (14.00)

TALEMA INWK/YR

Part Number

8 5

1 4

0.520(13.20)

0.100(2.54)

0.400(10.16)

0.654 (16.60)

0.591 (15.00)

TALEMA INWK/YR

Part Number

0.200(5.08)

10 9 7 6

1 2 4 5

0° -

8°

0.283(7.20)

0.244 (6.20)

0.020 x 0.12(0.50 x 0.30)

0.020 x 0.12(0.50 x 0.30)

0.283(7.20)

0.244 (6.20)

0° -

8°

21


Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwiseSurface Coplanarity will be 0.004 (0.10) maximum

Suggested Pad layout

COJModule

CUJ-XXX-16 Suggested PadLayoout

0.030(0,77)

19 x 0.050(19 x 1,27)

0.950(24,13)

0.661(16,80)

0.480(12,20)

0.091(2,30)

0° -

8°

0.079(2.00)

0.394(10.60)

0.031(0.80)

0.050(1.27)

0.350(8.89)

0.378(9.60)

0.504(12.80)

0.350(8.89)

0.077 (1.96)

0.346(8.80)

TALEMA INWK/YR

Part Number

Schematics

C1 162 153 144 135 126 117 108 9

1 162 153 144 135 126 117 108 9

EA1 162 153 144 135 126 117 108 9

0° -

8°

0.236(6.00)

0.189(4.80)

0.020 x 0.012 (0.50 x 0.30)

Schematic

1 40

2 39

3 38

5 36

6 35

7 34

8 33

10 31

11 30

12 29

13 28

15 26

16 25

17 24

18 23

20 21

Packaging & Dimensions • SMD Data and Signal Line Filter Chokes

1.102 (28.00)

0.638(16.20)

0.076(1.93)

0.575(14.60)

19 x 0.05 (1,27)

TALEMA INWK/YR

Part Number

22

Features• Low profile (6.0mm) and light weight (4.0 g), Talema

common mode choke modules provide excellent EMIreduction in Quad Port T1/E1 applications

• High density board placement with modular design• SMD package facilitates pick and place compatability

while ensuring consistent and reliable coplanarity• manufactured in an ISO-9001:2000, TS-16949:2002


level J-STD-020C

Electrical SpecificationsRatings@ 25°C ambientTest voltage between windings: 500 VrmsOperating Temperature Range: 40°C to +85°CStorage Temperature: -40°C to +125°CTest Frequency: Inductance measured @ 100kHz/20mVrms

Standard packing in tape and reelWeight: 4 grams

COJ Series - Common Mode Octal Chokes for Quad Port T1/E1

ApplicationThe Talema 16 data line common mode choke module has beendesigned for T1/E1 applications and provides excellent EMIsuppression for data and signal line filtering

noisserppuSesioNIMEeniLlangiSdnaataDrofsekohCedoMnommoClatcOJOC

rebmuNtraP fo.oNseniLataD

LCO).niMHμ(

RCD).pyTsmhOm(

noitaunettAedoMnommoC).pyTBd(

zHk001 zHM1 zHM01 zHM03 zHM05 zHM001 zHM003 zHM005

074-61-JOC 61 74 002 31 72 04 44 24 63 62 51

Dimensions and Schematic as noted above


0.189(4.80)

0.236(6.00) 0.016 x 0.016

(0.40 x 0.40)

Tape & Reel Packaging and Dimensions

epyTmmnisnoisnemiD leeR

eziSytitnauQ

)leeR/scP(ytitnauQ

)desaC/leeR(W F E P2 P0 D0 D1 P A0 B0 S0 T K0

SJM 00.23 02.41 57.1 00.2 00.4 05.1Ø 00.2Ø 00.02 06.51 04.71 04.82 04.0 04.6 23x033 006 0003/5

JGM 00.23 02.41 57.1 00.2 00.4 05.1Ø 00.2Ø 00.42 04.61 09.71 04.82 04.0 08.5 23x033 004 0002/5

QJM 00.44 02.02 57.1 00.2 00.4 05.1Ø 00.2Ø 00.42 57.61 04.82 04.04 04.0 07.6 44x033 004 0002/5

26302 00.44 02.02 57.1 00.2 00.4 05.1Ø 00.2Ø 00.02 03.51 02.82 04.04 04.0 06.6 44x033 003 0051/5

91228 00.23 02.41 57.1 00.2 00.4 05.1Ø 00.2Ø 00.02 06.51 04.71 04.82 04.0 04.6 23x033 006 0003/5

JOC 00.44 02.02 57.1 00.2 00.4 05.1Ø 00.2Ø 00.42 57.61 04.82 04.04 04.0 07.6 44x033 004 0002/5

epyTmmnisnoisnemiD leeR

eziSytitnauQ

)leeR/scP(ytitnauQ

)desaC/leeR(W F E P2 P0 D0 D1 P A0 B0 T K0

MJM 00.42 05.11 57.1 00.2 00.4 5.1Ø 05.1Ø 00.61 02.01 53.31 53.0 55.6 42x033 006 0003/5

EJM 00.42 05.11 57.1 00.2 00.4 5.1Ø 05.1Ø 00.02 09.11 02.8 04.0 06.7 42x033 006 0003/5

EJD 00.42 05.11 57.1 00.2 00.4 5.1Ø 05.1Ø 00.02 09.11 02.8 04.0 06.7 42x033 006 0003/5

MJD 00.42 05.11 57.1 00.2 00.4 5.1Ø 05.1Ø 00.61 02.01 53.31 53.0 55.6 42x033 006 0003/5

MTD 00.42 05.11 57.1 00.2 00.4 5.1Ø 05.1Ø 00.02 02.51 50.41 04.0 05.6 42x033 004 0002/5

THE TALEMA GROUP · Magnetic Components for Universal Applications

Dimensions for Carrier Tape (Unit : mm)

+0.1 -0.0

W±0

.30 F±0

.10

E±0.10 P2±0.10 P0±0.10 A

A

D0

D1

P±0.10 A0±0.10

B0±

0.10

S0±0

.10

K0±0.10

T±0.05

Section A-A

W±0

.30

F±0

.10

E±0.10 P2±0.05

P0±0.10

D0

A

A P±0.10 A0±0.10

B0±

0.10

T±0.05

K0±0.10Section A-A

+0.1 -0.0

D1

23

Tape & Reel Packaging and Dimensions

Reel Dimensions (Unit : mm)

mmnisnoisnemiDleeR

epyT A B C N

42x033 033 42 2.02 001

23x033 033 23 2.02 001

44x033 033 44 2.02 001

THE TALEMA GROUP · Magnetic Components for Universal Applications

A

B

N C

Inner Carton Outer Carton

285

355

355

330 50

335

TALE

MA

IN

M

/Y

MM

J-10

0B-5

01

TALE

MA

IN

M

/Y

MM

J-10

0B-5

01

TALE

MA

IN

M

/Y

MM

J-10

0B-5

01

END START

Blank Components BlankMin. 160mm Min. 400mm

Drawing direction

TALE

MA

INW

k/Yr

Part

Num

ber

TALE

MA

INW

k/Yr

Part

Num

ber

TALE

MA

INW

k/Yr

Part

Num

ber

24

Authorised Talema Sales Representatives and Distributors

THE TALEMA GROUP • Worldwide Toroidal Specialists10-07






UKDELTA COMPONENTS LTD.The CourtyardSeven Acres, Smallfield RoadHorne, Surrey RH6 9JPTel: Int. + 44 1342 844 555Fax: Int. + 44 1342 844 [email protected]

SpainOTTO RATING S.A.Castellnou, 31-3308017 BarcelonaTel: Int.+34 93 252 2708Fax: Int.+34 93 205 6264E-mail: [email protected] Site: www.rating.es

BeneluxISATRONICK B.V.B.A.Doolhoflaan 17B-2640 MortselTel: Int. + 32 3 448 1976Fax: Int. + 32 3 448 1195E-Mail: [email protected] Site: www.isatronick.be

PLZ 2 & 3 (less 35 & 36)H. J. MERCK & Co. GmbHHasenhöhe 12822587 HamburgTel: Int. + 49 40 87 08 63-0Fax: Int. + 49 40 87 08 63-33E-mail: [email protected]

ItalyTECHNOLASA ELETTRONICAVia Macello, 65/BI-39100 BolzanoTel: Int. + 39 0471 305 400Fax: Int. + 39 0471 305 444E-Mail: [email protected]

AustraliaTORTECH PTY. LTD.POB 194North Strathfield,Sydney, N.S.W. 2137Tel: Int. + 61 2 9642 6003Fax: Int. + 61 2 9642 6127E-Mail: [email protected] Site: www.tortech.com.au

PLZ 7BERND BIELERIndustrievertretungMax-Eyth-Straße 172379 HechingenTel: Int. + 49 7471 1804-0Fax: Int. + 49 7471 1804-10E-mail: [email protected]

Denmark & SwedenNORDTEK DANMARKHorsensvej 134DK-8300 OdderTel: Int. + 45 86 554 344Fax: Int. + 45 86 554 644E-Mail: [email protected] Site: www.nordtek.dk

AustriaTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 841 00 - 0Fax: Int. + 49 89 841 00 25Email: [email protected]

FranceE.S.I.A5-7 Place Marcel RebuffatCourtaboeuf 7 Villejust91971 Courtaboeuf CedexTel: Int. + 33 1 6931 4410Fax: Int. + 33 1 6931 4425E-Mail: [email protected] Site: www.esia.fr

GermanyPLZ 1, 4,5, 6, 8 & 9TALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 841 00 - 0Fax: Int. + 49 89 841 00 25Email: [email protected]

USAH. F. Transformers, Chokes &InductorsALFAMAG ELECTRONICS LLC945 ParkwoodPO Box 668Rolla, Missouri 65402Tel: Int.+573 364 2422Fax: Int.+573 364 5390E-Mail: [email protected] Site: www.alfamag.com

50/60 Hz Toroidal TransformersAMVECO MAGNETICS, INC.11222 Richmond Ave., Suite 120Houston, TX 77042E-Mail: [email protected] Site: www.amveco.com

SwitzerlandBTB COMPONENTS AGIm Chlösterli 4CH-8902 UrdorfTel: Int. + 41 44 734 4888Fax: Int. + 41 44 734 4892E-mail: [email protected]

Sales Representatives

GermanyBÜRKLIN OHG MÜNCHENSchillerstr. 4180336 MünchenTel: Int.+49 89 558 75-0Fax: Int.+49 89 558 75-421E-Mail: [email protected]: www.buerklin.com

BÜRKLIN OHG DÜSSELDORFHoherweg 24540231 DüsselforfTel: Int.+49 211 9067-0Fax: Int.+49 211 9067-125E-Mail: [email protected]: www.buerklin.com

SCHUKAT ELECTRONICVERTRIEBS GMBHDaimlerstraße 2640789 MonheimTel: Int.+49 2173 9505Fax: Int.+49 2173 950999Web: www.schukat.com

RUTRONIK ELEKTRONISCHEBAULEMENTE GMBHIndustriestraße 275228 Ispringen/PforzheimTel: Int.+49 7231 801-0Fax: Int.+49 7231 82282E-Mail: [email protected]: www.rutronik.com

ItalyRUTRONIK ITALIA S.r.i21, Via CalderaCentro Direzionale S.Siro20153 MilanoTel: Int.+39 02 40951 1Fax: Int.+39 02 40951 224E-Mail: [email protected]: www.rutronik.com

UKRS COMPONENTS LTD.Birchington RoadCorbyNorthants, NN17 9RSTel: Int.+44 8457 201201Fax: Int.+44 845 850 9911www.rs-components.com

DistributorsSwitzerlandRUTRONIK ELEKTRONISCHEBAUELEMENTE AGHölzliwisenstraße 5CH-8604 VolketswilTel: Int.+41 44 947 3737Fax: Int.+41 44 947 3747E-Mail: [email protected]

THE TALEMA GROUP • Magnetic Components for ISDN / XDSL / LAN Data Communications

SummaryTOTAL PROGRAMSECTION1• TOROIDAL 50/60Hz TRANSFORMERS

SECTION 2• TOROIDAL PCB TRANSFORMERS

SECTION 3• ELEVEN GOOD REASONS TO SELECT

TALEMA TOROIDAL TRANSFORMERS

SECTION 4• CHOKES, INDUCTORS AND TRANSFORMERS

FOR POWER APPLICATIONS

SECTION 5• COMPONENTS FOR TELECOMMUNICATIONS

AND DATA LINE TECHNOLOGY

SECTION 6• CURRENT COMPENSATED EMI

NOISE SUPPRESSION CHOKES

SECTION 7• CURRENT SENSE TRANSFORMERS

AND INDUCTORS

SECTION 8• LAN MAGNETIC COMPONENTS FOR

ETHERNET APPLICATIONS

SECTION 9• TI/E1/CEPT-PRI - T3/DS3/E3/STS-1

FOR TELECOMMUNICATION PRODUCTS

SECTION 10• U INTERFACE TRANSFORMERS FOR

COMMUNICATIONS AND DATA LINE

TECHNOLOGY

SECTION 11• TRANSFORMERS FOR BROADBAND

ACCESS AND FIBRE CHANNEL INTERFACE

ntmagnetics

nuvotem

e1/t1/cept/isdn-pri - t3/e3/d3/sts-1 interface ... brochure feb-08.pdf · • dje series - smd...

Documents