公司可提供钻井深度2000-12000米之间的钻机与修井机,有车...

12
三一石油科技 15 14 品质改变世界 SANY PETROLEUM TECHNOLOGY OIL DRILLING RIG 石油钻机 公司可提供钻井深度 2000-12000 米之间的钻机与修井机,有车载、 橇装、整托等运输形式;并可根据用户需求,提供适应陆地、浅滩、沙漠、 丘陵等环境需求的常温或低温钻机。 The company provides oil drilling rigs and workover rigs of 2000-12000m drilling depth, and truck-mounted, skid-mounted and trailer-mounted are available for transport; provides oil drilling rigs suitable for land, shoal, desert, hills and other environment in the common temperature or low temperature according to user needs.

Upload: others

Post on 02-Mar-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 15 14

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

OIL DRILLING RIG石油钻机公司可提供钻井深度 2000-12000 米之间的钻机与修井机,有车载、

橇装、整托等运输形式;并可根据用户需求,提供适应陆地、浅滩、沙漠、

丘陵等环境需求的常温或低温钻机。

The company provides oil drilling rigs and workover rigs of 2000-12000m drilling depth, and truck-mounted, skid-mounted and trailer-mounted are available for transport; provides oil drilling rigs suitable for land, shoal, desert, hills and other environment in the common temperature or low temperature according to user needs.

Page 2: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 17 16

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

SKID-MOUNTED DRILLING RIG橇装钻机

4000米 (1000HP)系列钻机型号及参数Models and parameters of 4000m (1000HP) series drilling rigs

型号 Model ZJ40/2250JDB ZJ40/2250LDB ZJ40/2250D ZJ40/2250DB

钻井深度Drilling▲depth,▲▲▲m▲

4½″ φ114mm 钻杆 drill pipe 2500-4000 2500-4000 2500-4000 2500-4000

5″ φ127mm 钻杆 drill pipe 2000-3200 2000-3200 2000-3200 2000-3200

最大钩载▲Maximum▲hook▲load,kN 2250 2250 2250 2250

绞车功率▲Drawworks▲power,▲kW(hp) 735(1000) 735(1000) 735(1000) 735(1000)

提升系统最大绳系Maximum▲tether▲of▲lifting▲system 5x6 5x6 5x6 5x6

转盘开口直径▲Diameter▲of▲rotary▲table▲opening,▲mm(in) 698.5(27-1/2) 698.5(27-1/2) 698.5(27-1/2) 698.5(27-1/2)

泥浆泵功率Power▲of▲mud▲pump,▲kW(hp) 956(1300) 956(1300) 956(1300) 956(1300)

泥浆泵台数Number▲of▲mud▲pumps 2 2 2 2

钻台高度Height▲of▲drill▲floor,▲▲▲m 6,7.5 6,7.5 6,7.5 6,7.5

TECHNICAL PARAMETERS技术参数

The design meets GB/T 23505 Petroleum Drilling and Workover Rigs, and the main supporting parts conform to API specifications

Reasonable overall layout, safe and fast demolition, complying with highway transport requirements

Features explosion-proof, leak-proof, anti-corrosion, moisture-proof, cold resistant, high temperature resistant and sand prevention

Mechanical drive, electromechanical drive, and electric drive are available The mast is front opening K type, featuring low installation and integral lifting The substructure is in parallelogram structure and uses drawworks power for lifting,

which is safe and fast

设计符合国标GB/T▲23505《石油钻机和修井机》,主要配套部件符合API规范

总体布局合理,拆迁安全快速,符合高速公路运输要求

产品具有防爆、防漏、防腐、防潮、防寒、耐高温、防沙等性能

采用机械驱动、机电复合驱动、电驱动等型式。

井架采用前开口K型,低位安装,整体起升

底座采用平行四边形结构,利用绞车动力起升,安全、快捷

Page 3: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 19 18

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

9000米 (3000HP)系列钻机型号及参数Models and parameters of 9000m (3000HP) series drilling rigs

型号 Model ZJ90/6750D ZJ90/6750DB

钻井深度Drilling▲depth,▲▲▲m

4½″ φ114mm 钻杆 drill pipe 6000-9000 6000-9000

5″ φ127mm 钻杆 drill pipe 5000-8000 5000-8000

最大钩载▲Maximum▲hook▲load,kN 6750 6750

绞车功率▲Drawworks▲power,▲kW(hp) 2210(3000) 2210(3000)

提升系统最大绳系Maximum▲tether▲of▲lifting▲system 7x8 7x8

转盘开口直径▲Diameter▲of▲rotary▲table▲opening,▲mm(in) 952.5(37-1/2) 952.5(37-1/2)

泥浆泵功率Power▲of▲mud▲pump,▲kW(hp) 1180(1600) 1180(1600)

泥浆泵台数Number▲of▲mud▲pumps 3 3

钻台高度Height▲of▲drill▲floor,▲▲▲m 10.5,12 10.5,12

5000米 (1500HP)系列钻机型号及参数Models and parameters of 5000m (1500HP) series drilling rigs

型号 Model ZJ50/3150L ZJ50/3150LDB ZJ50/3150D ZJ50/3150DB

钻井深度Drilling▲depth,▲▲▲m

4½″ φ114mm 钻杆 drill pipe 3500-5000 3500-5000 3500-5000 3500-5000

5″ φ127mm 钻杆 drill pipe 2800-4500 2800-4500 2800-4500 2800-4500

最大钩载▲Maximum▲hook▲load,kN 3150 3150 3150 3150

绞车功率▲Drawworks▲power,▲kW(hp) 1100(1500) 1100(1500) 1100(1500) 1100(1500)

提升系统最大绳系Maximum▲tether▲of▲lifting▲system 6x7 6x7 6x7 6x7

转盘开口直径▲Diameter▲of▲rotary▲table▲opening,▲mm(in) 952.5(37-1/2) 952.5(37-1/2) 952.5(37-1/2) 952.5(37-1/2)

泥浆泵功率Power▲of▲mud▲pump,▲kW(hp) 1180(1600) 1180(1600) 1180(1600) 1180(1600)

泥浆泵台数Number▲of▲mud▲pumps 2 2 2 2

钻台高度Height▲of▲drill▲floor,▲▲▲m 7.5,9 7.5,9 7.5,9 7.5,9

7000米 (2000HP)系列钻机型号及参数Models and parameters of 7000m (2000HP) series drilling rigs

型号 Model ZJ70/4500L ZJ70/4500LDB ZJ70/4500D ZJ70/4500DB

钻井深度Drilling▲depth,▲▲▲m

4½″ φ114mm 钻杆 drill pipe 4500-7000 4500-7000 4500-7000 4500-7000

5″ φ127mm 钻杆 drill pipe 4000-6000 4000-6000 4000-6000 4000-6000

最大钩载▲Maximum▲hook▲load,kN 4500 4500 4500 4500

绞车功率▲Drawworks▲power,▲kW(hp) 1470(2000) 1470(2000) 1470(2000) 1470(2000)

提升系统最大绳系Maximum▲tether▲of▲lifting▲system 6x7 6x7 6x7 6x7

转盘开口直径▲Diameter▲of▲rotary▲table▲opening,▲mm(in) 952.5(37-1/2) 952.5(37-1/2) 952.5(37-1/2) 952.5(37-1/2)

泥浆泵功率Power▲of▲mud▲pump,▲kW(hp) 1180(1600) 1180(1600) 1180(1600) 1180(1600)

泥浆泵台数Number▲of▲mud▲pumps 2 2 3(2) 3(2)

钻台高度Height▲of▲drill▲floor,▲▲▲m 7.5,9,10.5 7.5,9,10.5 7.5,9,10.5 7.5,9,10.5

12000米 (6000HP)系列钻机型号及参数Models and parameters of 12000m (6000HP)series drilling rigs

型号 Model ZJ120/9000DB

钻井深度Drilling▲depth,▲▲▲m

4½″ φ114mm 钻杆 drill pipe 7500-12000

5″ φ127mm 钻杆 drill pipe 7000-10000

最大钩载▲Maximum▲hook▲load,kN 9000

绞车功率▲Drawworks▲power,▲kW(hp) 4400(6000)

提升系统最大绳系Maximum▲tether▲of▲lifting▲system 7x8

转盘开口直径▲Diameter▲of▲rotary▲table▲opening,▲mm(in) 1257.3(49-1/2)

泥浆泵功率Power▲of▲mud▲pump,▲kW(hp) 1640(2200)

泥浆泵台数Number▲of▲mud▲pumps 3

钻台高度Height▲of▲drill▲floor,▲▲▲m 12

TECHNICAL PARAMETERSTECHNICAL PARAMETERS技术参数技术参数

Page 4: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 21 20

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

TRUCK-MOUNTED DRILLING RIG车载钻机

整机结构合理,集装化程度高,占地面积小

动力传动系统采用国际名牌发动机和液力机械传动箱;电、气、液路系统集中控制,主要元件采用国际知

名品牌元件

采用重载8×6、10×8、12×8、14×8、14×12驱动底盘,配备液压助力转向系统,具有良好的通过性、

越野性和稳定性

绞车和转盘可选用电驱动方式;主刹车采用带式刹车或液压盘式刹车;辅助刹车采用气动水冷推盘式刹车

或水刹车型式

转盘传动箱可实现正倒档,适应正反扣钻杆旋转作业,配备反扭矩释放装置以保证钻杆变形能安全释放

井架采用前开口、双节套装前倾式桅形井架,或直立双节套装井架,液压起放及伸缩

可配备铁钻工、排管机械手、动力猫道,减少平台操作工人(选配)

产品型号 Product model ZJ10/600CZ ZJ15/900CZ ZJ20/1350CZ ZJ30/1800CZ ZJ40/2250CZ

钻井井深Drilling▲depth,▲m(4▲▲1/2″钻杆DP)

500-1000 800-1500 1200-2000 1600-3000 2500-4000

大修井深Large▲workover▲depth,▲m(3▲▲1/2″钻杆DP)

2500 4500 5500 6500 7000

最大钩载Maximum▲hook▲load,▲kN

600 900 1350 1800 2250

大钩速度Hook▲speed,▲m/s

0.2 ~ 1.4

井架高度Mast▲height,▲m

29/31 33 35 36/38 38

井架形式Mast▲form

桅形 Mast 桅形 Mast 桅形 Mast 桅形 / 直立Mast / vertical

桅形 / 直立Mast / vertical

发动机功率Engine▲power,▲kW

261 403 470 2×403 2×470

液力传动箱Hydraulic▲transmission▲box

4700 M5620AR M5620AR 2×M5620AR 2×M6620AR

传动形式Transmission▲type

液力 + 机械 Hydraulic + Mechanical

游动系统Traveling▲system

4×3 5×4 5×4 6×5 6×5

主大绳直径Diameter▲of▲main▲rope,▲mm

φ26 φ26 φ29 φ32 φ32

游车大钩型号Model▲of▲travelling▲block▲hook▲

YG90 YG110 YG160 YG180 YG225

水龙头型号Swivel▲model

SL110 SL135 SL160 SL225 SL225

转盘型号Rotary▲table▲model

ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

底盘型号Chassis▲model

XD40/8×6 XD50/10×8 XD60/12×8 XD70/14×8 XD70/14×8

接近角Approach▲angle▲/离去角 departure▲angle

22° /18° 30° /20° 26° /18° 26° /18° 26° /18°

最小离地间隙Minimum▲ground▲clearance,▲mm

311

最大爬坡度Maximum▲climb▲gradient

30% 26% 26% 26% 26%

最小转弯直径Minimum▲turning▲diameter,m

28 30 38 41 41

移运外形尺寸Deportion▲dimensions,m

16.7×2.8×4.2 18.8×2.9×4.3 20.5×2.9×4.4 22.3×3.0×4.5 22.3×3×4.5

主机质量Weight▲of▲master▲unit,kg

50000 58000 65000 80000 85000

附件质量Weight▲of▲accessories,kg

~ 15000 ~ 20000 ~ 24000 ~ 32000 ~ 34000

Reasonable structure, a high degree of containerization, and a small footprint. The power transmission system adopts a world famous engine and a hydrodynamic-mechanical

transmission case. The electric circuit, air course and fluid path systems are under centralized control. The main components are world famous brands.

It utilizes a heavy-duty 8×6, 10×8, 12×8, 14×8, 14×12 drive template and is equipped with a hydraulic assisted power steering system to ensure excellent trafficability, cross-country performance and stability.

Electric drive is optional for winches and turntables. The main brake is a band brake or a hydraulic disc brake. The auxiliary brake is a pneumatic water-cooled push-tray brake or hydromatic brake.

The turntable transmission box can achieve forward and reverse gear and is suitable for rotation operation of the right and left hand thread drill rod. A reactive torque release device is equipped to ensure the safe release of drill rod deformation.

The derrick is a front opening, double-section outfitted, forward leaning mast derrick or upright double-section outfitted derrick, which is hydraulically lifted and stretched.

Iron roughneck, rack pipe robots and power catwalks are optional to reduce platform operators.

TECHNICAL PARAMETERS技术参数

Page 5: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 23 22

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

TRAILER-MOUNTED DRILLING RIG拖挂钻机

Trailer-mounted drilling rigs include mechanical drive, electric drive and non-anchor types. Mechanical drive trailer-mounted drilling rig uses drawworks driven by diesel engine and hydraulic

transmission box, featuring reasonable match and high transmission efficiency. The drawworks and rotary table of the electric drive trailer-mounted drilling rig are driven by SCR/VFD motor,

and all-digital scheme is used for transmission control. The mast of trailer-mounted drilling rig without anchor uses front opening three-section forward leaning mast.

The height is up to 47m, achieves three standing poles tripping operations, and the guy rope is tied to the body of the drilling rig, reducing rig dismantling time and labor intensity.

Reasonable structure, a high degree of containerization, and a small footprint. The drawworks are double drum type, the main brake is hydraulic disc brake, and the auxiliary brake uses

pneumatic water-cooled disc brake or eddy current brake. The mast is a front opening, double-section outfitted, forward leaning mast or upright double-section outfitted

mast, which is hydraulically lifted and stretched.

拖挂钻机分为机械驱动拖挂钻机、电驱动拖挂钻机、无地锚拖挂钻机

机械驱动拖挂钻机采用柴油机与液力传动箱驱动绞车,匹配合理,传动效率高

电驱动拖挂钻机由SCR/VFD电动机驱动绞车和转盘,传动控制采用全数字方案

无地锚拖挂钻机井架采用前开口三节套装前倾式桅形井架,高度达到47米,实现三立根(立柱)起下钻作业,

绷绳打在钻机本体上,减少钻机的拆装时间和劳动强度

整机结构合理,集装化程度高,占地面积小

绞车采用双滚筒绞车,主刹车采用液压盘式刹车。辅助刹车采用气动水冷推盘式刹车或电磁涡流刹车

井架采用前开口、双节套装前倾式桅形井架或直立井架,液压起放及伸缩

类型 Type 有地锚拖挂钻机 Trailer-mounted drilling rig with ground anchor

无地锚拖挂钻机Trailer-mounted

drilling rig without ground anchor

产品型号Product▲model ZJ20/1580T ZJ30/1700T ZJ30/1700T ZJ40/2250T ZJ40/2250T ZJ40/2250T

钻井深度(4▲▲1/2″钻杆DP)Drilling▲depth,▲m 2000 3000 3000 4000 4000 4000

钻井深度(5″钻杆DP)Drilling▲depth,▲m 1800 2500 2500 3200 3200 3200

最大钩载Maximum▲hook▲load,▲kN 1580 1800 1800 2250 2250 2250

大钩速度Hook▲speed,▲m/s 0.2 ~ 1.5 0.2 ~ 1.4

井架高度Mast▲height,▲m 35/36/38 47

井架形式Mast▲form

两节套装、直立无绷绳式、桅形Two-section outfitted, vertical freestanding type, mast-shaped

三节桅形套装Three-section mast-

shaped outfitted钻台面高度Height▲of▲drill▲floor,▲m 4.5 6 5.5 6 6 ~ 6.7 6

动力机型号Power▲machine▲model C18 C15×2

3508B+SR4B柴油发电机组

Diesel generator sets

C18×2

3508B+SR4B柴油发机组

Diesel generator sets

C18×2

动力机功率Power▲of▲power▲machine,▲kW×台数Number▲of▲units

470 402×2 1000×2+600 470×2 1250×2+600 470×2

传动形式Transmission▲type

液力 Hydraulic +机械 mechanical

液力 Hydraulic +机械 mechanical VFD/SCR 液力 Hydraulic +

机械 mechanical VFD/SCR 液力 Hydraulic +机械 mechanical

传动箱型号Gearbox▲Model S6610HR S5610HR×2 S6610HR×2 S6610HR×2

游动系统Traveling▲system 5×4 6×5 5×4 6×5 6×5 6×5

绞车型号Drawworks▲model JC21 JC28 JC28 JC28 JC28 JC28主刹车Main▲brake 盘刹 Disc brake 盘刹 Disc brake 盘刹 Disc brake 盘刹 Disc brake 盘刹 Disc brake 盘刹 Disc brake

辅助刹车Auxiliary▲brake WCB224 WCB324 DWS40 WCB236

能耗制动 Energy consumption

brakeWCB236

主大绳直径Diameter▲of▲main▲rope,▲mm

φ29 φ32

游车大钩型号Model▲of▲travelling▲block▲hook

YG160 YG180 YG180 YG225

水龙头型号Swivel▲model SL160 XSL225 XSL225 XSL225 XSL225 XSL225

转盘型号Model▲of▲rotary▲table ZP175 ZP275 ZP205 ZP275 ZP275 ZP275

泥浆泵功率Mud▲pump▲power,▲hp×台数Number▲of▲units

800×1 800×2 1000×2 1300×2 1300×2 1300×2

液路系统额定工作压力Rated▲working▲pressure▲of▲fluid▲path▲system,▲MPa

16 16/21

气路系统最高工作压力Maximum▲working▲pressure▲of▲gas▲system,MPa

1

TECHNICAL PARAMETERS技术参数

Page 6: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 25 24

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

WORKOVER RIG修井机

Reasonable structure, a high degree of containerization, and a small footprint.

The power system uses hydraulic + mechanical transmission, featuring high overall efficiency.

The chassis uses special type II chassis or self-propelled chassis to meet user needs.

The mast is front opening, single or double-section outfitted type, hydraulically lifted and stretched.

The main brake of the drawworks is band brake or hydraulic disc brake, and the auxiliary brake is pneumatic water-cooled disc brake or liquid brake.

整机结构合理,集装化程度高,占地面积小

动力系统采用液力+机械传动形式,综合效率高

底盘可选用专用二类底盘或自走式底盘等多种形

式,满足用户各种需要

井架采用前开口单节或双节套装,液压起升,液压

或机械伸缩

绞车主刹车可采用带式刹车或液压盘式刹车,辅助

刹车可采用气动水冷推盘式刹车、水刹车等形式

产品型号 Product model XJ350 XJ600 XJ700 XJ900

名义小修井深(2▲▲7/8″外加厚油管)Nominal▲depth▲of▲small▲workover▲(2▲▲7/8″▲external▲upset▲oil▲tube),▲m

1600 2600 3200 4000

名义大修井深(2▲▲7/8″钻杆)Nominal▲depth▲of▲large▲workover▲(2▲▲7/8″▲drill▲pipe),▲m

- - 2000 3200

最大钩载Maximum▲hook▲load,▲kN

350 600 700 900

额定钩载Rated▲hook▲load,▲kN

200 300 400 600

发动机型号Engine▲model

X6130 F8L413F T-3A929 或 WD615.68 C9

发动机功率Engine▲power,▲(kW)

174 188 210 或 226 261

传动形式Transmission▲type

液力 Hydraulic+ 机械 mechanical

游动系统绳数Traveling▲system▲ropes

4×3 4×3 4×3 4×3

井架高度Mast▲height,▲m

18.21 18.21 18.21 29.31

主大绳直径Diameter▲of▲main▲rope,▲mm

22 22 22 26

大钩速度Hook▲speed,▲m/s

0.2 ~ 1.75 0.2 ~ 1.75 0.2 ~ 1.4 0.2 ~ 1.75

接近角 / 离去角Approach▲angle▲/▲departure▲angle

18° /14° 18° /14° 18° /12° 23° /16°

最小离地间隙Minimum▲ground▲clearance,▲mm

340 311 311 340

最大爬坡度Maximum▲climb▲gradient

30% 30% 26% 30%

最小转弯直径Minimum▲turning▲diameter,▲mm

28 33 33 28

转盘型号Rotary▲table▲model

ZP35 ZP70 ZP70 ZP90

游车大钩型号Model▲of▲travelling▲block▲hook

YG35 YG60 YG70 YG90

水龙头型号Swivel▲model

SL35 SL70 SL70 SL110

移运时外形尺寸Deportion▲dimensions,▲m

16.7×2.5×4.1 10.3×2.5×3.9 11.6×2.5×4.0 16.7×2.8×4.1

主机质量Weight▲of▲master▲unit,▲kg

23000 25000 25000 42000

TECHNICAL PARAMETERS技术参数

Page 7: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 27 26

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

产品型号 Product model XJ1100 XJ1350 XJ1600 XJ1800 XJ2250

名义小修井深(2▲▲7/8"▲外加厚油管)Nominal▲depth▲of▲small▲workover▲(2▲▲7/8"▲external▲upset▲oil▲tube),▲m

5500 7000 8500 / /

名义大修井深(2▲▲7/8"▲钻杆)Nominal▲depth▲of▲large▲workover▲(2▲▲7/8"▲drill▲pipe),▲m

4500 5800 7000 8000 9000

钻井深度(4▲▲1/2"▲▲钻杆)Drilling▲depth▲(4▲▲1/2"▲drill▲pipe),▲m - 2000 2500 3000 4000

最大钩载Maximum▲hook▲load,▲kN 1100 1350 1600 1800 2250

额定钩载Rated▲hook▲load,▲kN 800 1000 1200 1500 1800

发动机型号Engine▲model C15 C15 C18 C15×2 C18×2

发动机功率Engine▲power,▲(kW) 403 403 470 403×2 470×2

液力传动箱型号Model▲of▲hydraulic▲transmission▲box M5620AR M5620AR M5620AR M5620AR M6620AR×2

传动形式Transmission▲type 液力 Hydraulic+ 机械 mechanical

井架高度Mast▲height,▲m 31,33 35 36,38 36,38

游动系统▲Mast▲height,▲m 5×4 5×4 5×4/6×5 6×5

主大绳直径Diameter▲of▲main▲rope,▲mm 26 29 29/32 32

大钩速度Hook▲speed,▲m/s 0.2 ~ 1.2 0.2 ~ 1.4 0.2 ~ 1.3 0.2 ~ 1.3 0.2 ~ 1.3

底盘型号 / 驱动形式 XD50/10×8 XD50/10×8 XD60/12×8 XD70/14×8 XD70/14×8

最小离地间隙Minimum▲ground▲clearance,▲mm 311 311 311 311 311

最大爬坡度Maximum▲climb▲gradient 26% 26% 26% 26% 26%

最小转弯直径Minimum▲turning▲diameter,▲mm 33 33 38 41 41

转盘型号Rotary▲table▲model ZP135 ZP135 ZP175/ZP205 ZP205/ZP275 ZP205/ ZP275

游车大钩型号Model▲of▲travelling▲block▲hook YG110 YG135 YG160 YG180 YG225

水龙头型号Swivel▲model SL110 SL135 SL160 SL225 SL225

移运时外形尺寸Deportion▲dimensions,▲m 18.5×2.8×4.2 18.8×2.9×4.3 20.4×2.9×4.5 22.5×3.0×4.5 22.5×3.0×4.5

主机质量Weight▲of▲master▲unit,▲kg 55000 58000 65000 76000 78000

三一石油科技 27 26SANY PETROLEUM TECHNOLOGY

TECHNICAL PARAMETERS技术参数

Page 8: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 29 28

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

RIG PARTS钻机部件

Page 9: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 31 30

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

CROWN BLOCK TRAVELLING BLOCK天 车 游 车

Comply with API Spec 4F, 8C specifications. The crown block is equipped with anti-collision buffer device. The sheave groove has been heat-treated to improve the surface abrasion resistance of the groove and

extend the life of the sheave. The bottom of the crown block integrates installation interface for top drive. All sheaves are equipped with rope jump guard to improve security. All bearings are equipped with separate lubricant path, making the maintenance more convenient. The sheaves of the crown block are universal for the sheaves of supporting travelling block.

Comply with API Spec 8C specifications. The sheave groove has been heat-treated to improve the surface abrasion resistance of the

groove and extend the life of the sheave. The shaft of the travelling block is forged from alloy steel. All bearings are equipped with separate lubricant path, making the maintenance more

convenient. The travelling block is equipped with heavy rope guard to improve safety. The sheaves of the travelling block are universal for the sheaves of supporting crown block.

符合API▲Spec▲4F、8C规范

天车设有防碰缓冲装置

滑轮轮槽经热处理,提高轮槽表面耐磨性,延长滑轮使用寿命

天车下部设有顶驱安装接口

所有滑轮均设有挡绳装置,提高安全性

所有轴承设有独立润滑油道,维护更便捷

天车滑轮可和其配套的游车滑轮通用

符合API▲Spec▲8C规范

滑轮轮槽经热处理,提高轮槽表面耐磨性,延长了滑轮使用寿命

游车轴为合金钢锻造

所有轴承设有独立润滑油道,维护更便捷

游车设有重型钢丝绳防护罩,提高安全性

游车滑轮可和其配套的天车滑轮通用

型号 Model 单位 Unit TC135 TC170 TC225 TC315 TC450 TC585 TC675最大钩载▲Maximum▲hook▲load

kN 1350 1700 2250 3150 4500 5850 6750

钢丝绳直径▲Diameter▲of▲wire▲rope

mm 26 29 32 35 38 42 45

滑轮外径▲▲Outside▲diameter▲of▲sheave

mm 915 1005 1120 1270 1524 1524 1524

滑轮数Number▲of▲sheaves 5 6 6 7 7 8 8

外形尺寸▲▲Dimensions mm

2500 2668 2668 2783 3410 3625 4645

2050 2460 2709 2709 2753 2832 3340

1920 1855 2469 2469 2420 2580 2702

重量▲Weight kg 2770 4540 6500 8500 11105 12100 15340

型号 Model 单位 Unit YC225 YC315 YC450 YC585 YC675最大钩载▲Maximum▲hook▲load

kN 2250 3150 4500 5850 6750

钢丝绳直径▲Diameter▲of▲wire▲rope

mm 32 32/35 35/38 42 45

滑轮外径▲▲Outside▲diameter▲of▲sheave

mm 1120 1270 1524 1524 1524

滑轮数Number▲of▲sheaves 5 6 6 7 7

外形尺寸▲▲Dimensions mm

2294 2680 3075 3086 3087

1190 1650 1600 1600 1600

630 975 800 953 980

重量▲Weight kg 3780 5500 8300 9200 10800

Page 10: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 33 32

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

HOOK TRAVELLING HOOK大 钩 游 钩

Comply with API Spec 8C specifications. The hook body, ring and ring seat are made of special alloy steel. The hook is fitted with a buffer device to protect drill pipe joint. The hook is equipped with sensitive brake, which can lock or release the hook automatically. The main force bearing members of the hook have passed non-destructive testing. The main hook are equipped with double safety device to ensure the security.

Comply with API Spec 8C specifications. The travelling block and hook are combined to shorten the length of hook and traveling block and

better meet the requirements of drilling technology. The sheave groove has been heat-treated to improve the surface abrasion resistance of the

groove and extend the life of the sheave. The shaft of the travelling block is forged from alloy steel. All bearings are equipped with separate lubricant path, making the maintenance more convenient. The hook is equipped with reliable safety device to ensure the safety of suspension swivel lifting

bail or top drive lifting bail.

符合API▲Spec▲8C规范

大钩钩身、吊环、吊环座均为特殊合金钢制作

大钩内部装有保护钻杆接头缓冲装置

大钩设有灵敏制动装置,可自动锁紧或松开钩身

大钩主要受力件,均经无损探伤

主钩设有双重安全装置,保障安全性

符合API▲Spec▲8C规范

游车和大钩合体,缩小大钩和游车长度,更好满足钻井工艺要求

滑轮轮槽经热处理,提高轮槽表面耐磨性,延长了滑轮使用寿命

游车轴为合金钢锻造

所有滑轮轴承都设独立润滑油道,维护更便捷

大钩钩口可靠的有安全装置,保证悬挂的水龙头提环或顶驱提环安全

型号 Model 单位 Unit DG225 DG315 DG450 DG675

最大钩载▲Maximum▲hook▲load▲ kN 2250 3150 4500 6750

弹簧行程▲Spring▲travel 180 200 200 220

主钩口开口尺寸Main▲hook▲opening▲size▲

mm 190 220 220 240

外形尺寸▲Dimensions mm

2546 2953 2950 3600

780 890 890 1110

750 880 880 1020

重量▲▲Weight kg 2180 3410 3500 7065

型号 Model 单位 Unit YG135 YG170 YG315 YG450

最大钩载▲Maximum▲hook▲load kN 900 1700 3150 4500

钢丝绳直径▲Diameter▲of▲wire▲rope mm 29 29 35 38

滑轮外径▲▲Outside▲diameter▲of▲sheave mm 915 915 1270 1524

滑轮数Number▲of▲sheaves 4 5 6 6

外形尺寸Dimensions▲▲ mm

3195 3294 4322 4887

960 960 1350 1600

616 630 784 880

Page 11: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 35 34

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

SWIVEL ROTARY TABLE水龙头 转 盘

Comply with API Spec 8C specifications. The gooseneck pipe thread joint complies with API std 5B specifications. Equipped with standard lifting bail and dual male pin alloy steel sub. The top of gooseneck pipe has a channel for logging wire rope. The washpipe and packing device are in box structure, and can be replaced without removing the rotary

hose and gooseneck pipe.

Comply with API Spec 7K specifications. The large gears and pinion gears are made of alloy steel. The drive uses curved tooth bevel gears, which are made of alloy material, featuring strong bearing capacity,

smooth transmission and long life. The rotary table is fully lubricated and reliably sealed. The input shaft is in cylinder structure, which is easy for maintenance and replacement. Equipped with API mark casing bushing and special lift fittings.

符合API▲Spec▲8C规范

鹅颈管螺纹接头符合API▲std▲5B规范

配有标准提环和双公扣合金钢短节

鹅颈管顶部设有测井钢丝绳经过的通道

冲管和盘根装置为盒式结构,不需拆下水龙带和鹅颈管即可更换

符合API▲Spec▲7K规范

大小齿轮均为合金钢材料制成

传动采用弧齿锥齿轮,合金材料制成,

承载能力强,传动平稳,寿命长

转盘润滑充分、密封可靠

输入轴为筒式结构,便于维修更换

配API标注套管补芯及专用吊具

型号 Model 单位 Unit SL135 SL225 SL450 SL675最大钩载Maximum▲hook▲load

kN 1350 2250 4500 6750

最高转数Maximum▲number▲of▲revolutions▲

r/min 300 300 300 300

最高工作压力▲▲Maximum▲working▲pressure

Mpa 35 35 35 52

中心管通经▲Central▲tube▲diameter▲

mm 64 75 75 102

滑轮数Number▲of▲sheaves 5 6 7 8

接头螺纹Joint▲thread

接中心管To▲center▲pipe

4 1/2-REG-LH 6 5/8-REG-LH 7 5/8-REG-LH 8 5/8-REG-LH

接方钻杆To▲kelly

6 5/8-REG-LH 6 5/8-REG-LH 6 5/8-REG-LH 6 5/8-REG-LH

外形尺寸(长 x宽 x高)Dimensions▲(LxWxH)

mm

2505 2880 3015 3649

758 1046 1096 1450

840 1065 1065 1162

型号 Model 单位 Unit ZP175 ZP205 ZP275 ZP375 ZP495通孔直径Through-hole▲diameter▲▲

mm 444.5 520.7 698.5 952.5 1257.3

中心距Center▲distance▲

mm 1118 1353 1353 1353 1651

最大静负荷Maximum▲static▲load▲

kN 1350 3150 4500 5850 7250

最大工作扭矩▲Maximum▲operating▲torque

Nm 13729 22555 27459 32362 37000

最高转数Maximum▲number▲of▲revolutions

300 300 300 300 300

齿轮传动比Gear▲ratio 3.58 3.22 3.67 3.56 9.85

外形尺寸(长 x宽 x高)Dimensions▲(LxWxH)

mm

1935 2292 2392 2468 3693

1280 1475 1670 1810 2314

585 668 685 718 857

重量Weight▲▲ kg 3888 5530 6163 7990 16690

Page 12: 公司可提供钻井深度2000-12000米之间的钻机与修井机,有车 …resource.sanygroup.com/files/20141231094932833.pdfRotary table model ZP175 ZP175 ZP175 ZP205/ZP275 ZP275

三一石油科技 37 36

品 质 改 变 世 界

SANY PETROLEUM TECHNOLOGY

DRAWWORKS MUD PUMP绞 车 泥浆泵

The parts comply with API 7K specifications. The drawworks include mechanical drive, DC drive and AC drive, and a variety of models are available for

each type. The drum is LEBUS grooved; both high speed and low speed drums of the mechanical drawworks are

equipped with the ventilating air tube clutch. The main brake of the drawworks is hydraulic disc brake, and the auxiliary brakes include electromagnetic

eddy current brake, Eaton brake and motor energy consumption brake, which can meet the requirements of different drilling rigs.

The drawworks are in integral or split structure for easy transportation and installation. The drawworks are equipped with automatic driller.

F series and 3NB series mud pumps are available for users. F series mud pumps comply with API7K specifications, and all of its wearing parts can be interchanged with any API standard

accessories. F series mud pumps feature advanced structure and smooth operation, and can meet the requirements on high pressure and large

displacement of medium and deep oil drilling operations. F series mud pumps feature long stroke and reliable operation, and can keep running at low speed of rotation in order to extend the

life of fluid end. Suction valve and discharge valve of F series mud pumps are interchangeable. 3NB series mud pumps are manufactured according to the industry standard SY/T5138 Triplex Single Acting Pump and are widely

used in drilling and workover operations.

零部件符合API7K规范

绞车有机械驱动、直流电驱动、交流电驱动等形式,每

种形式有多种型号供选择

滚筒LEBUS开槽,机械绞车的滚筒高低速均为通风式

气胎离合器

绞车主刹车为液压盘式刹车,辅助刹车有电磁涡流、伊

顿刹车、电机能耗制动等多种方式,能满足不同钻机的

配套要求

绞车为整体或分体式结构,以便于运输、安装

绞车配有自动送钻装置

泥浆泵有F系列、3NB系列多种型号泥浆泵可供用户选用

F系列泥浆泵符合API7K规范,其所有易损件可与任何API标

准的配件互换

F系列泥浆泵结构先进、运转平稳,在中深井钻井作业可满足油

田高压和大排量要求

F系列泥浆泵泵冲程长,使用可靠,可保持在低速的转数下运行,

以延长液力端寿命

F系列泥浆泵吸入阀和排出阀可以互换

3NB系列泥浆泵按行业标准SY/T5138《三缸单作用钻井泵》制

造,该系列泵广泛的用于钻、修井作业

型号 Model 单位 Unit JC20 JC30 JC40 JC50 JC70 JC90

名义钻深▲Nominal▲drilling▲depth m 2000 3000 4000 5000 7000 9000

最大输入功率▲Maximum▲input▲power▲▲ kW 522 560 735(1000hp)

1100(1500hp)

1470(7000hp)

2210(3000hp)

钢丝绳直径▲▲Diameter▲of▲wire▲rope mm 29 29 32 35 38 45

最大快绳拉力▲Maximum▲fast▲line▲tensile▲force▲ kN 200 210 275 340 485 640

型号 Model 单位 Unit F-500 F-800 F-1000 F-1300 F-1600 F-2200

额定输入功率Rated▲input▲power▲ kW(hp) 368(500) 588(800) 735(1000) 956(1300) 1176(1600) 1617(2200)

额定压力Rated▲pressure▲▲ MPa 35 35 35 35 35 52

额定冲数Rated▲stroke▲rate SPM 165 150 140 120 120 105

最大缸套直径Maximum▲liner▲diameter mm 170 170 170 180 182 230

冲程▲Stroke▲ mm 191 229 254 305 305 356

吸入管径▲Suction▲pipe▲diameter▲ mm 203.2 254 305 305 305 305

排出管径▲Discharge▲pipe▲diameter mm 103.2 130 130 130 130 130

型号 Model 单位 Unit 3NB500 3NB800 3NB1000 3NB1300 3NB1600 3NB2200

额定输入功率▲Rated▲input▲power▲ kW(hp) 368(500) 588(800) 735(1000) 956(1300) 1176(1600) 1617(2200)

额定压力▲Rated▲pressure▲▲ MPa 27 35 35 35 35 52

额定冲数▲Rated▲stroke▲rate SPM 165 150 140 120 120 105

最大缸套直径▲Maximum▲liner▲diameter mm 170 170 170 180 182 230

冲程▲Stroke▲ mm 191 229 254 305 305 356

吸入管径▲▲Suction▲pipe▲diameter▲ mm 203.2 254 305 305 305 305

排出管径▲▲Discharge▲pipe▲diameter mm 103.2 130 130 130 130 130