e3 building blockscxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
DESCRIPTION
czxxxxxxxxxxxxxxxxxxxscssssssssssssssssssssscssssssssssssssssssssssssssssssssssssssssssssssssssssssTRANSCRIPT
-
A130/01/2015 Rev: P/N 9021-60764:A1
Documento 9021-60764
Gua de referencia de bloques de construccinE3 Series y S3
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
-
http://www.systemsensor.com/appguides/
E3 Series y serie S3 bloques Gua de referencia: P/N 9021-60764:A1 30/01/2015
Alarma de incendio & las limitaciones del sistema de comunicacin de emergenciaMientras que un sistema de seguridad de la vida puede reducir las tasas de seguro, no es un sustituto para la vida y seguro de propiedad.Un sistema automtico de alarma de incendio tpicamente formada por humo detectores de calor, detectores, estaciones manuales, dispositivos de advertencia audible y un panel de control de alarma de incendio (FACP) con capacidad de control remoto notifi-cacin puede proporcionar advertencias tempranas de un incendio en vas de desarrollo. Este sistema, sin embargo, no garantiza la proteccin contra daos a la propiedad o prdida de vidas humanas como resultado de un incendio. Un sistema de comunicacin de emergenciaun sistema automtico de alarma de incendio (como se describi anteriormente) y una vida
tpicamente se compone de
sistema de comunicacin de seguridad que puede incluir una unidad de control autnoma (ACU), local funcionamiento consola (LOC), voz comunicacin, y otras varias comunicaciones interoperables metanfetamina Sao puede transmitir un mensaje de notificacin masiva. Este sistema, sin embargo, no garantiza proteccin contra daos o la prdida de vidas humanas resultantes de un evento de seguridad de incendio o de vida. El fabricante recomienda que los detectores de humo o calor localizados a travs de un local protegido siguiendo las recomendaciones de la actual edicin de la National Fire proteccin Asociacin estndar 72 (NFPA 72), las recomendaciones del fabricante, estado y los cdigos locales y las recomendaciones contenidas en la gua para adecuado uso de sistema de detectores de humo, que se hace disponible sin cargo para todos los distribuidores de instalacin. Este documento puede encontrarse en http://
que:www.systemsensor.com/appguides/. Un estudio realizado por la Federal Emergency Management Agency (Agencia de los Estados Unidos
Gobierno de los Estados) indic que no puede ir detectores de humo en tanto como el 35% de todos los fuegos. Mientras que los sistemas de alarma de incendio son
diseado para proporcionar la alerta temprana contra el fuego, no garantizan atencin o proteccin contra incendios. Un sistema de alarma de incendio No puede proporcionar ADVERTENCIA oportuna o adecuada, o simplemente puede no funcionar, por una variedad de razones: Detectores de humollegar a los detectores como en chimeneas, o detrs de las paredes, en
No puede detectar fuego donde no se puede fumar
techos, o en el otro lado de puertas cerradas. Detectores de humo tambin puede no detectar un incendio en otro nivel o piso de un edificio.
Un detector de segundo piso, por ejemplo, no puede detectar un incendio planta baja o stano. Partculas de combustin o "humo"No puede llegar a las cmaras de deteccin de detectores de humo
de un incendio en desarrollo
porque: Barreras como las puertas cerradas o parcialmente cerradas,
paredes, chim-neys, reas mojadas o hmedas ni siquiera pueden inhibir la partcula o humo
flujo. Las partculas del humo pueden llegar a ser "fras" estratificar y no llegar a las paredes del techo o superiores donde se encuentran los
detectores. Las partculas del humo pueden ser sopladas lejos de detectores de salidas de aire, tales como los respiraderos de aire acondicionado. Las partculas del humo pueden ser arrastradas hacia retornos de aire antes de llegar al detector.
La cantidad de "smoke" presente puede ser insuficiente para detectores de humo alarma. Detectores de humo estn diseados para alarmar a los niveles var-pagars de densidad de humo. Si tales niveles de densidad no cre-ado por un incendio en vas de desarrollo en la localizacin de los detectores, los detectores no ir en alarma. Detectores de humo, incluso cuando funciona correctamente, tienen limitaciones de deteccin. Detectores que tienen fotoelectrnicos deteccin cham-bers tienden a detectar mejores que fuego llameante, que tienen poco de humo visible ardientes incendios. Detectores que tienen cmaras de sensores tipo ionizante tienden a detectar rpida-llameante Fuegos ms ardientes incendios. Debido a incendios se desarrollan en formas diferentes y a menudo son impredecibles en su crecimiento, ningun tipo de detector es necesariamente lo mejor y un determinado tipo de detector puede no proporcionar aviso adecuado de un incendio. Detectores de humo no puede esperarse que proporcione suficiente advertencia de incendios causados por incendio, nios jugando con fsforos (especialmente en los dormitorios), fumar en la cama, explosiones violentas
(causada por escapes de gas, almacenamiento inadecuado de materiales inflamables-als, etc.). Detectores de calorSlo cuando el calor en sus sensores aumenta en un determinado
no detecta partculas de combustin y alarma
la tarifa o alcance un nivel predeterminado. Tarifa-de-se levanta calor detec-Tor puede ser sujeto a reducida sensibilidad con el tiempo. Por esta razn, la caracterstica de la subida de tipos de cada detector debe analizarse al menos una vez al ao por un especialista en proteccin de incendios calificado. Detectores de calor estn diseados para proteger la propiedad, no la vida. IMPORTANTE! Detectores de humo debe instalarse en el mismo habitacin como el panel de control y en las habitaciones utilizadas por el sistema para la conexin de cables de transmisin de alarma, comunicaciones, sealizacin o poder. Si no estn situados de detectores, devel - oping fuego puede daar el sistema de alarma, comprometiendo su abil-dad para reportar un incendio. Dispositivos de advertencia audible como campanas, bocinas, luces estroboscpicas, altavoces y pantallasestn situados en el otro lado de cerrado o en parte las puertas abiertas o
No pueden alertar a la gente si estos dispositivos
se encuentran en otro piso de un edificio. Cualquier dispositivo de advertencia puede fallar alertar a personas con una discapacidad o aquellos que recientemente han consumido drogas, alcohol o medicamentos. Tenga en cuenta
Un sistema de comunicacin de emergencia puede tener prioridad sobre un sistema de alarma de incendio en caso de una emergencia de seguridad de la vida. Sistemas de mensajera de voz debe estar diseado para cumplir con requisitos de durabilidad intelligi segn lo definido por la NFPA, los cdigos locales y las autoridades teniendo la jurisdiccin (AHJ).Lenguaje y requisitos educacionales deben estar claramente dis-seminated en cualquier muestra local.
Luces estroboscpicas pueden, bajo ciertas circunstancias, provocar convulsiones en personas con enfermedades como la epilepsia. Estudios han demostrado que ciertas personas, incluso cuando escuchan una seal de alarma de incendio, no atender ni comprender el significado de la seal. Pueden tener dispositivos audibles, como cuernos y campanas, frecuencias y diversos patrones tonales. Es responsabilidad del dueo de la propiedad para llevar a cabo simulacros de incendio y otros ejercicios de entrenamiento para dar a conocer las seales de alarma de incendio e instruirlos en la reaccin apropiada para alarmar sig-nals. En raras ocasiones, el sonido de un dispositivo de advertencia puede causar prdida de la audicin temporal o permanente.
Un sistema de seguridad de la vida No funcionar sin ningn elctrico poder. Si falla de energa AC, el sistema operar desde bateras espera solamente para un perodo de tiempo especificado y slo si las pilas han correctamente mantenidas y sustituido regularmente. Equipos utilizados en el sistemaible con el panel de control. Es imprescindible utilizar un slo equipo
puede que no sea tcnicamente compat-
en la lista para el servicio con su panel de control. Lneas telefnicas necesarios para transmitir seales de alarma de un prem...ISES a una estacin de monitoreo central puede estar fuera de servicio o tem-porarily desactivado. Para mayor proteccin contra fallas en las lneas telefnicas, sistemas de transmisin de radio de copia de seguridad se recomiendan. La causa ms comnmantenimiento inadecuado. Para mantener el sistema de seguridad de toda la vida en
de la vida es falla del sistema de seguridad
excelente estado de funcionamiento, mantenimiento continuo es requerido por las recomendaciones del fabricante y stan-dardos UL y la NFPA. Como mnimo, los requisitos de NFPA 72 sern fol - lowed. Entornos con grandes cantidades de polvo, suciedad o alta velocidad requieren mantenimiento ms frecuente. Debe disponerse de un contrato de mantenimiento a travs de representante local del fabricante. Mantenimiento debe programarse mensual o como requerido por los cdigos nacionales y/o locales y debe ser por - formado por instaladores de sistemas de saftety vida profesional autorizado solamente. Deben mantenerse registros escritos adecuados de todas las inspecciones. Lmite-D-1-20132
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
-
P/N 9021-60764:A1 30/01/2015 3
Precauciones para la instalacinAdherencia al siguiente ayudar en la instalacin sin problemas con fiabilidad a largo plazo:ADVERTENCIA - varias fuentes diferentes de energa puede ser conectado con el panel de control de alarma de incendio. Desconecte todo fuentes de energa antes de darle servicio. Equipo de control de la unidad y Asociacin-ADO puede daarse por tarjetas eliminar o insertar-ing, mdulos o cables de interconexin mientras se energiza la unidad. No intente instalar, servicio, u operar esta unidad hasta manuales son ledos y comprendidos. PRECAUCIN - prueba del sistema Re-aceptacin despus de Software Cambios:debe ser probado de acuerdo con NFPA 72 despus de cualquier pro-
Para garantizar un funcionamiento adecuado del sistema, este producto
gramacin operacin o cambios en el software especfico. Se requiere pruebas de re-aceptacin despus de cualquier cambio, adicin o eliminacin de los componentes del sistema, o despus de cualquier modificacin, reparacin o ajuste de hardware del sistema o el cableado. Todos compo-componentes, circuitos, las operaciones del sistema o funciones de software conocidas por estar afectado por un cambio deben ser 100% probado. Adems, para asegurarse de que otras operaciones no son afectados por descuido, por lo menos 10% de los dispositivos que no son directamente afectados por el cambio, hasta un mximo de 50 dispositivos, iniciando tambin debe ser verificado el funcionamiento del sistema probado y apropiada. Este sistemaC/32-120 F y un humedad relativa 93% 2% RH (no-
cumple con los requisitos de NFPA para la operacin en 0-49
condensacin) a 32 C 2 C (90 F 3 F). Sin embargo, la vida til de las bateras en espera del sistema y las com-ponentes electrnicos puede verse afectada negativamente por la humedad y las gamas de temperaturas extremas. Por lo tanto, se recomienda que este sistema y sus perifricos instalarse en un ambiente con una temperatura ambiente normal de 15-27 C/60-80 F. Verificar que los tamaos del cable son adecuadoscando dispositivo bucles. No puede tolerar la mayora de los dispositivos ms
los de iniciar indi-
Cada I.R. 10% de la tensin de dispositivo especificado.
Como todos los dispositivos electrnicos de estado slido,funciona correctamente o pueden ser daados cuando se someten a la luz-
Este sistema puede
Ning inducida transitorios. Aunque ningn sistema es totalmente inmune a interferencias y transitorios de rayos, conexin a tierra adecuada reducir la susceptibilidad. No se recomienda cableado areo exterior o sobrecarga, debido a una mayor susceptibilidad a las huelgas de relmpago cercanos. Consulte con el departamento tcnico de Ser-vicios si se anticipan problemas o encoun-Rada. Desconecte las bateras y corriente alterna antes de retirar o colocacin de placas de circuitos. No hacerlo puede daar los circuitos. Eliminar todos los conjuntos electrnicosescariado o perforacin del recinto. Cuando sea posible, hacer
previo a cualquier perforacin, archivar,
todas las entradas de cable desde los lados o desde atrs. Antes de efectuar modifi caciones, verificar que no interferirn con batera, trans-anterior o circuito impreso localizacin del tablero. No apriete los terminales de tornillo ms de 9 lb-pulg. Sobre-apriete puede daar hilos, dando lugar a la menor presin de contacto terminal y dificultad con el retiro terminal de tornillo. Este sistema contiene componentes sensibles a la esttica. Siempre tierra con una correa de mueca apropiada antes de operar-correctamente cualquier circuitos as cargas estticas se eliminan del cuerpo. Use envases supresor esttico para proteger conjuntos electrnicos de la unidad.
Siga las instruccionesManuales de programacion. Estas instrucciones deben seguirse para
en la instalacin, operacin y pro-
evitar daos en el panel de control y equipos asociados. Confiabilidad y funcionamiento FACP dependen de una
instalacin adecuada. PRECAUCIONES-D1-9-2005
Aviso de FCCADVERTENCIA: irradiar energa de radiofrecuencia y si no se instala y
Este equipo genera, utiliza y puede
utilizado con arreglo a la instruccin manual puede causar interferencias en las comunicaciones por radio. Ha sido probado y cumple con los lmites de los aparatos informticos de clase A en virtud de la subparte B de la parte 15 de FCC, que est diseado para proporcionar una proteccin razonable contra las interferencias cuando los dispositivos funcionan en un entorno comercial. Funcionamiento de este equipo en una zona residencial es probable que cause interfer-ence, en cual caso el usuario deber corregir la interferencia a su propia costa.
Requisitos canadiensesEste aparato digital no excede los lmites de clase A para las emisiones de ruido de radiacin de aparatos digitales establecidos en el Reglamento sobre interferencia de Radio del Departamento de comunicaciones Cana-dian. Le presente appareil numerique n'emet de pas bruits radi-oelectriques depassant les limites applicables aux appa-reils numeriques de la classe A prescrites dans le Reglement sur le brouillage radioelectrique edicto par le Ministre des Communications du Canada.
eVance de Honeywell International Inc.
y SWIFT son marcas registradas; y Echelon
FAAST FocalPoint, Somerville-FCI , , es una marca registrada y LonWorks
SmartScan , es una marca registrada de Echelon Corporation.
Velociti , y E3 Series son marcas registradasARCNET est registrado
marca registrada de Datapoint Corporation. 2015 por Honeywell International Inc. Todos los derechos reservados. Uso no autorizado de este documento est estrictamente prohibido.
Microsoft y Windows son marcas registradas de Microsoft Corporation.
E3 Series y serie S3 bloques Gua de referencia:
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
Multilizer PDF Translator Free version - translation is limited to ~ 3 pages per translation.
-
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Software DownloadsIn order to supply the latest features and functionality in fire alarm and life safety technology to our customers, we make frequent upgrades to the embedded software in our products. To ensure that you are installing and programming the latest features, we strongly recommend that you download the most current version of software for each product prior to commissioning any system. Contact Technical Support with any questions about software and the appropriate version for a specific application.
Documentation FeedbackYour feedback helps us keep our documentation up-to-date and accurate. If you have any comments or suggestions about our online Help or printed manuals, you can email us.Please include the following information:
Product name and version number (if applicable)Printed manual or online HelpTopic Title (for online Help)Page number (for printed manual)Brief description of content you think should be improved or corrected Your suggestion for how to correct/improve documentation
Send email messages to:[email protected]
Please note this email address is for documentation feedback only. If you have any technical issues, please contact Technical Services.
4
-
P/N 9021-60764:A1 01/30/2015 5
Table of ContentsSection 1: Basic E3 Series Remote Configurations ..............................................................6
1.1: E3 Series Remote Annunciator, E3BB-BAA1 Cabinet Ordering Information .............................................7 1.2: E3 Series Remote Annunciator, E3BB-BA2 Cabinet Ordering
Information ................................................8 1.3: E3 Series Remote Annunciator, E3BB-FLUSH-LCD Cabinet Ordering Information..................................9 1.4: E3 Remote Annunciator,
E3BB-NGA-FLUSH Cabinet Ordering Information..........................................10 1.5: E3 Series Remote Annunciator, E3BB-BAA with E3ID2-A Inner Door Cabinet Ordering Information...11 1.6:
E3 Series Remote Annunciator, RAN-7100 Cabinet Ordering Information ...............................................12 1.7: KDU-Retrofit Cabinet Ordering Information..............................................................................................13Section 2: E3/S3 Series FACP Panel Configurations ..........................................................14
2.1: E3 Series B-Slim Cabinet Ordering Information.........................................................................................15 2.2: E3 Series B Size Cabinet Ordering Information ......................................................................................16 2.3: E3 Series C Size Cabinet Ordering Information ......................................................................................17 2.4: E3 Series Fire/Audio C Size Cabinet Ordering Information ...................................................................18 2.5:
E3 Series D Size Cabinet Ordering Information......................................................................................19 2.6: S3-Slim Cabinet Ordering Information .......................................................................................................20Section 3: Basic E3 Series In-Building Mass Notification Cabinet Configurations..........21
3.1: E3 Series ACU C Size Cabinet used for Combination Fire/MNS System (NGA Display) Ordering Information
.........................................................................................................................................................22 3.2: E3 Series ACU D Size Cabinet used for Combination Fire/MNS System (NGA Display) Ordering Information .........................................................................................................................................................23Section 4: Basic E3 Series In-Building Mass Notification LOC Configurations ...............24
4.1: E3 Series LOC Local Operating Console Ordering Information ................................................................25 4.2: E3 Series LOC-TEL Local Operating Console Ordering Information........................................................26Section 5: Basic E3 Series Audio Transponder Cabinet Configurations..........................27
5.1: E3 Series INX CAB-B Cabinet Ordering Information................................................................................28 5.2: E3 Series INX CAB-C Cabinet
Ordering Information................................................................................29 5.3: E3 Series INX CAB-D Cabinet Ordering Information................................................................................30Section 6: E3 Series Classic Bulk Audio Cabinet Configurations .....................................31
6.1: E3 Series Classic, SBB-C4 Cabinet Ordering Information .........................................................................32 6.2: E3 Series Classic SBB-D4 Ordering Information .......................................................................................33Section 7: Retrofit Kit Cabinets.............................................................................................34
7.1: IF600-Retrofit Backbox Ordering Information ...........................................................................................35 7.2: 600XL Retrofit Backbox Ordering
Information..........................................................................................36 7.3: 7200 Retrofit Kit B Size Backbox Ordering Information........................................................................37 7.4: 7200 Retrofit Kit C Size Backbox Ordering Information........................................................................38
E3 Series and S3 Series Building Blocks Reference Guide
-
R P T - E 3 - U T P
4 1/2
R A N - 7 1 0 0
2 1 / 2
K D U B A C K B O XK D U R E T R O F IT C O V E RR A N - 7 1 0 0
PRELIMINARY: E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series Remote Configurations
Section 1: Basic E3 Series Remote Configurations
E3BB-BAA1
E3BB-BA2
E3BB-FLUSH-LCD
E3BB-NGA-FLUSH
E3BB-BAA/E3ID-2
RAN-7100
KDU Retrofit
38
10
3
10
13
3
1 3
1 2
1 5
1 0
1 3 4
1 5
1 2
10
19 1/4
1 0
5 1 / 4
6
-
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015 7
E3 Series Remote Annunciator, E3BB-BAA1 Cabinet Ordering Information
1.1 E3 Series Remote Annunciator, E3BB-BAA1 Cabinet Basic E3 Series Remote Configurations
Ordering InformationThe E3BB-BAA1 model is a single module remote annunciator cabinet that houses any one of the following:
Table 1.1.1 lists the components that can be ordered for the E3 Series Remote Annunciator E3BB-BAA1 cabinet.
NGA ASM-16 Microphone
Figure 1.1.1 E3 Series Remote Annunciator with NGA Display
Figure 1.1.2 E3 Display Remote Annunciator with ASM-16
Figure 1.1.3 shows the E3BB-BAA1 cabinet installation configuration.3
Figure 1.1.3 E3 Remote Annunciator E3BB-BAA1 Cabinet Configuration
10
8 3/4
Qty Part Number Model Number Description List PriceNote: X represents the required components.
CabinetsDimensions:X E3BB-BAA1
E3BB-RAA18 3/4W x 10H x 3D8 3/4W x 10H x 3D
Enclosure, black, AA1 with key lock Enclosure, red, AA1 with key lock Shipped with 1 slot Inner Door
Modules1100-0505X NGA
RepeaterNGA, Network Graphic AnnunciatorNetwork Repeater, unshielded twisted pairRPT-E3-UTP
1100-0455 ASM-16MIC
Programmable Switch ModuleINCC-MIC, Paging Microphone1100-0452
Optional Components FSL-E3
FML-E3Fiber moduleFiber module
Single mode fiber moduleMulti mode fiber module
90492E3-TRIMKIT-A1
90492 Thumb lock Thumb quarter turn latchTrim Ring Kit
Table 1.1.1 E3 Remote Annunciator E3BB-BAA1 Cabinet Ordering InformationPRELIMINARY:
-
PRELIMINARY: E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series Remote Configurations E3 Series Remote Annunciator, E3BB-BA2 Cabinet Ordering Information
1.2 E3 Series Remote Annunciator, E3BB-BA2 Cabinet Ordering Information
The E3BB-BA2 model is a single module remote annunciator cabinet that houses either the LCD- E3 or the LCD-SLP. Table 1.2.1 lists the components that can be ordered for the E3 Series Remote Annunciator E3BB-BA2 cabinet.
Figure 1.2.1 E3 Series Remote Annunciator with LCD-E3 Display
Figure 1.2.2 E3 Series Remote Annunciator with LCD-SLP Display
Figure 1.2.3 shows the E3BB-BA2 cabinet installation configuration.
Figure 1.2.3 E3 Remote Annunciator E3BB-BA2 Cabinet Configuration
13
10
3
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinets Dimensions:1 E3BB-BA2
E3BB-RA213 1/4W x 10H x 3D13 1/4W x 10H x 3D
Enclosure, black, AA1 with key lock Enclosure, red, AA1 with key lock Shipped with 1 slot Inner Door
ModulesLCD-SLPX Display
DisplayLCD Touch screen display unitLCD keypad displayLCD-E3
Optional Components 90492 E3-TRIMKIT-A2
90492 Thumb lockE3 TRIMKIT
Thumb quarter turn latchTrim Ring Kit
Table 1.2.1 E3 Remote Annunciator E3BB-BA2 Cabinet Ordering Information
8
-
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015 9
E3 Series Remote Annunciator, E3BB-FLUSH-LCD Cabinet Ordering Information Basic E3 Series Remote Configurations
1.3 E3 Series Remote Annunciator, E3BB-FLUSH-LCD Cabinet Ordering Information
The E3BB-FLUSH-LCD model is a single module flush remote annunciator cabinet that houses either the LCD-E3 or the LCD-SLP. Table 1.3.1 lists the components that can be ordered for the E3 Series Remote Annunciator E3BB-FLUSH-LCD cabinet.
Figure 1.3.1 E3 Series Remote Annunciator with LCD-E3 Display
Figure 1.3.2 E3 Remote Annunciator with LCD-SLP
Figure 1.3.3 shows the E3BB-FLUSH-LCD cabinet installation configuration.
Figure 1.3.3 E3 Remote Annunciator E3BB-FLUSH-LCD Cabinet Configuration
15
12
13 1/43
10"
Qty Part Number Model Number Description List PriceNote: X represents the required components.
CabinetDimensions:X E3BB-FLUSH-LCD 13 1/4W x 10H x 3D Flush Enclosure, black, with key lock
ModulesLCD-SLPX Display
DisplayLCD Touch screen display unitLCD keypad displayLCD-E3
Optional Components
Table 1.3.1 E3 Remote Annunciator E3BB-FLUSH-LCD Cabinet Ordering Information
PRELIMINARY:
-
RP T -E 3 -U TP
4 1 /2
NGA
PRELIMINARY: E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series Remote Configurations E3 Remote Annunciator, E3BB-NGA-FLUSH Cabinet Ordering Information
1.4 E3 Remote Annunciator, E3BB-NGA-FLUSH Cabinet Ordering Information
The E3BB-NGA-FLUSH model is a single module, flush remote annunciator cabinet that houses the NGA. Table 1.4.1 lists the components that can be ordered for the E3 Series Remote Annuncia- tor E3BB-NGA-FLUSH.
Figure 1.4.1 E3 Series Remote Annunciator with LCD-E3 Display
Figure 1.4.2 shows the E3BB-NGA-FLUSH cabinet configuration.
Figure 1.4.2 E3 Remote Annunciator E3BB-NGA-FLUSH Cabinet Configuration
15
12
10
13 1 /4
Qty Part Number Model Number Description List PriceNote: X represents the required components.
CabinetE3BB-NGA-FLUSH 13 1/4W x 10H x 4 1/2D
Dimensions:1 Flush Enclosure, black,
Modules1100-0505X NGA Annunciator
Network repeaterNetwork graphic annunciatorNetwork repeater, unshielded twisted-pairRPT-E3-UTP
Optional Components FSL-E3
FML-E3Single modeMulti mode
Fiber loop module, Single modeFiber loop module, Multi mode
Table 1.4.1 E3 Remote Annunciator E3BB-NGA-FLUSH Cabinet Ordering Information
10
-
41/2"
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015 11
E3 Series Remote Annunciator, E3BB-BAA with E3ID2-A Inner Door Cabinet Ordering Information1.5 E3 Series Remote Annunciator, E3BB-BAA with E3ID2-A
Basic E3 Series Remote
Inner Door Cabinet Ordering InformationThe E3BB-BAA with E3ID2-A Inner Door model is a double module, remote annunciator cabinet that is used for display and control. It houses the LCD-E3 or LCD-SLP and an ASM-16. Table 1.5.1 lists the components that can be ordered for the E3 Series Remote Annunciator E3BB- BAA cabinet.
Figure 1.5.1 E3 Series Remote Annunciator with LCD-E3 Display and ASM-16Figure 1.5.2 shows the E3BB-BAA with the E3ID2-A inner door cabinet configuration.
Figure 1.5.2 E3 Remote Annunciator E3BB-BAA with E3ID2-A Cabinet Configuration
10"
19"
Qty Part Number Model Number Description List PriceNote: X represents the required components.
CabinetsE3BB-BAA
Dimensions:19W x 10H x 4 1/2D1 LOC Enclosure, black
LOC Enclosure, redE3BB-RAAE3ID2-A
19W x 10H x 4 1/2D
ModulesLCD-E3X LCD Keypad Display
LCD Touch screen displayLCD-SLP1100-0455 ASM-16 programmable switch module
Optional Components90492 Thumb latch Quarter turn thumb latchE3-TRIMIT-A
Table 1.5.1 E3 Remote Annunciator E3BB-BAA with E3ID-2 Cabinet Ordering Information
PRELIMINARY:
-
R A N -7 1 0 0
2
PRELIMINARY: E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series Remote Configurations E3 Series Remote Annunciator, RAN-7100 Cabinet Ordering Information
1.6 E3 Series Remote Annunciator, RAN-7100 Cabinet Ordering Information
The RAN-7100 model is a double module, remote annunciator cabinet that is used for display and control. Figure 1.6.1 illustrates the remote serial annunciator, LCD display for the Gamewell RAN retrofit. This model is installed in the GWRAN2-BB backbox.
Figure 1.6.1 E3 Series Remote Annunciator, RAN-7100 Display Panel
Figure 1.6.2 shows the RAN-7100 cabinet installation configuration.
Figure 1.6.2 E3 Remote Annunciator RAN-7100 Cabinet Configuration
1 0
5
Qty Part Number Model Number Description List PriceNote: X represents the required components.
CabinetsRAN-7100
Dimensions:10W x 5 1/4H x 2 1/2D1
1Remote Alpha-numeric displayBackboxGWRAN2-BB
Module
Optional Components
Table 1.6.1 E3 Remote Annunciator RAN-7100 Cabinet Ordering Information
12
-
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015 13
KDU-Retrofit Cabinet Ordering Information Basic E3 Series Remote Configurations
1.7 KDU-Retrofit Cabinet Ordering InformationThe KDU-Retrofit model is a single module retrofit cabinet that houses the LCD display for the Gamewell RAN, FCI KDU retrofits. Figure 1.7.1 illustrates the KDU-Retrofit cabinet configuration.
Figure 1.7.1 KDU-Retrofit Remote Annunciator Cabinet Configuration
2 5/8"
18"
6"
Qty Part Number Model Number Description List PriceKit includes the following:
CabinetKDU-RETROFIT
Dimensions18W x 2.5/8H x 6D1 Includes the mounting plate for the existing
remote KDU backbox.
This Kit requires the following:1 RAN-7100 Annunciator Remote serial annunciator, LCD display
Optional Components
Table 1.7.1 KDU Retrofit Remote Annunciator Cabinet Ordering Information
PRELIMINARY:
-
LCD-E3 ILI-MB-E3/ILI95-MB-E3
PM-9/PM-9G
ASM-16 DACT-E3 RPT-E3PM-9/PM-9GCABINETB,
INNERDOOR
LCD-E3KEYPADILI-MB-E3/
ILI95-MB-E3
BATTERIES
LCD-E3KEYPAD
DACT-E3 RPT-E3
BLANK PLATEBLANKPLATE
ASM-16
ILI-S-E3/ILI95-S-E3
ILI-MB-E3/ILI95-MB-E3
ILI-S-E3/ILI95-S-E3
PM-9/PM-9G
BATTERIES
DACT -E3R PT-E 3
PM -9 /PM -9G
IN I-VG SER IES
ILI-MB-E3 /IL I9 5-MB-E3
CAB IN ET C ,
AM- 50 E XT END E R PL ATEAM-5 0SER IES
L C D - E 3K E Y P A D
TELEPH ONE BO X
-
- -
-
LCD-E3DISPLAY
ILI-S-E3/ILI95-S-E3OR ANX
ILI-S-E3/ILI95-S-E3OR ANX
ILI-S -E3/ILI95-S -E3OR ANX
PM-9/PM-9G
RPT-E3
DACT-E3
ASM-16
4
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Section 2: E3/S3 Series FACP Panel Configurations
E3BB-RBSLIM
E3BB-BB B CAB
E3BB-BC/INCC C CAB
E3BB-BC/INCC C CABAUDIO
E3BB-BD/INCC D CAB
S3 SLIM CAB
AC POWE R ON
POWER
FAULT
GROUND
FAULTALARM
SYSTEM
TROUBLE
SUPERVISORY
SYSTEM
SILENCED
ALARM ACKNOWLED GE
TROUBLE ACKNOWLED GE SIGNALSILENCE
SYSTEM RESET/
LA MP TES T
MENU
BACKSPACE/EDIT
OK/ENTER
CABINET B
DACT-E3 RPT-E3-UTP 14 1/8"
20 1/8"
LCD-SLP
SLP-E3
SLC-PM/SLC95-PM #1
SLC-PM/SLC95-PM #2
FLPS-7
SLC-PM
14
-
-LCD-E3ILI-MB-E3/
ILI95-MB-E3
PM-9/PM-9G
P/N 9021-60764:A1 01/30/2015 15
E3 Series B-Slim Cabinet Ordering Information E3/S3 Series FACP Panel Configurations
2.1 E3 Series B-Slim Cabinet Ordering InformationThe E3 Series B-Slim Cabinet is used to house the components that support the E3 Series Fire Evacuation System. Figure 2.1.1 illustrates the E3 Series, B-Slim Cabinet configuration. Table 2.1.1 lists the E3 Series, B-Slim cabinet ordering information.
Figure 2.1.1 E3 Series, B-Slim Cabinet Configuration
AC POWE R ON
POWER
FAULT
GROUND
FAULTALARM
SYSTEM
TROU BLE
SUPERVISORY
SYSTEM
SI LENCED
ALARM ACKNOWLED GE
TROUBLE ACKNOWLED GE
SI GNALSILENCE
SYSTEM RESET/
LAMP TEST
MENU
BACKSPACE/EDIT
OK/ENTER
Qty Part Number Model Number Description List PriceNote: X represents required components.
CabinetE3BB-RBSLIM
Dimensions:20 1/8H x 14 1/8W x 4 1/2D E3BB-RBSLIM Enclosure, Red, NarrowX
ModulesILI-MB-E3X System Sensor
System SensorIntelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Supplemental (max-1)ILI-S-E3
ILI95-MB-E3 Apollo SensorApollo Sensor
Intelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Supplemental (max-1)ILI95-S-E3
PM-9XX
Power SupplyDisplay
9 Ampere Power SupplyLCD Keypad DisplayLCD-E3
2 BatteriesXOptional Components DACT-E3 RPT-E3-UTP DACT
Networking CardDigital Alarm Communiocation TransmitterNetwork Repeater, Unshielded Twisted-Pair
FSL-E3 Fiber Networking Fiber Network Module, Single-Mode Fiber, 1 Channel
FML-E3 Fiber Networking Fiber Network Module, Multi-Mode Fiber, 1 Channel
9051690517
7 A/H Seismic12 A/H Seismic
7 A/H Seismic Battery Bracket Kit 12 A/H Seismic Battery Bracket Kit
75687 Cable 20 Repeater Cable needed for RPT-E3-FO 75687-A Special Order Cable
Table 2.1.1 E3 Series, B-Slim Cabinet Ordering Information
E3 Series and S3 Series Building Blocks Reference Guide
-
BATTERIES
CABINETB,INNERDOOR
ASM-16LCD-E3KEYPAD DACT-E3 RPT-E3
PM-9/PM-9G
ILI-MB-E3/ILI95-MB-E3
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
E3/S3 Series FACP Panel Configurations E3 Series B Size Cabinet Ordering Information
2.2 E3 Series B Size Cabinet Ordering InformationThe E3 Series B Size Cabinet is used to house the components that support the E3 Series Fire Evacuation System. Figure 2.2.1 illustrates the E3 Series, B Size cabinet configuration. Table 2.2.1 lists the E3 Series, B Size cabinet ordering information.
Figure 2.2.1 E3 Series B Size Cabinet Configuration
CABINET B
Qty Part Number Model Number Description List PriceNote: X represents required components.
CabinetE3BB-BB
Dimensions:19 3/8W X 19 3/8H X 4 1/2D E3 Enclosure, Black, B SizeX
E3BB-RBE3ID2-B
19 3/8W X 19 3/8H X 4 1/2D E3 Enclosure, Red, B Size Inner Door Inner Door, 2 Slot, B SizeX
ModulesLCD-E3X
XDisplayPower Supply
LCD Keypad Display9 Ampere Power SupplyPM-9
ILI-MB-E3 System SensorApollo Sensor
Intelligent Loop Interface, Mother BoardIntelligent Loop Interface, Mother BoardILI95-MB-E3
2-BatteriesXOptional Components
Maximum 18 AH Capacity
1100-04501100-0455
Cover PlateSwitch Module
Single Size Inner Door Blank PlateASM-16 Programmable Switch Module (max-1)
DACT-E3RPT-E3-UTP
DACTNetworking Card
Digital Alarm Communication TransmitterNetwork Repeater, Unshielded Twisted-Pair
FSL-E3 Fiber Networking Fiber Network Module, Single-Mode Fiber, 1 Channel
FML-E3 Fiber Networking Fiber Network Module, Multi-Mode Fiber, 1 Channel
9051890520
7 A/H Seismic18 A/H Seismic
7 A/H Seismic Battery Bracket Kit 18 A/H Seismic Battery Bracket Kit
E3-TRIMKIT-B E3 Cabinet B, Trim RingsTable 2.2.1 E3 Series B Cabinet Ordering Information
16
-
ILI-S-E3/ILI95-S-E3
ILI-MB-E3/ILI95-MB-E3
ILI-S-E3/ILI95-S-E3
PM-9/PM-9G
BATTERIES
LCD-E3KEYPAD
DACT-E3 RPT-E3
BLANK PLATEBLANKPLATE
ASM-16
CABINET C
P/N 9021-60764:A1 01/30/2015Table 2.3.1 E3 Series C Size Cabinet Ordering Information
17
E3 Series C Size Cabinet Ordering Information
2.3 E3 Series C Size Cabinet Ordering InformationE3/S3 Series FACP Panel Configurations
The E3 Series C Size Cabinet is used to house the components that support the E3 Series Fire Evacuation System. Figure 2.3.1 illustrates the E3 Series, C Size cabinet configuration. Table 2.3.1 lists the E3 Series, C Size cabinet ordering information.
Figure 2.3.1 E3 Series C Size Cabinet Configuration
Qty Part Number Model Number Description List PriceNote: X represents required components.
Cabinet Dimensions:X E3BB-BC/INCC
E3BB-RC/INCC30H x 19 3/8W x 4 1/2D30H x 19 3/8W x 4 1/2D
E3 Enclosure, Black, C SizeE3 Enclosure, Red, C Size
XX
E3-ILI-CPLATEE3ID2-C
Used for FACPUsed for LCD-E3
Intelligent Loop Module Mounting PlateInner Door, 2 Slot, C Size
E3ID3-CModules
Used with NGA Inner Door, 3 Slot, C Size
X LCD-E31100-0505
DisplayNGA
LCD Keypad DisplayNetwork Graphic Annunciator
XX
PM-9ILI-MB-E3
Power SupplySystem Sensor
9 Ampere Power SupplyIntelligent Loop Interface, Mother Board (max-1)
ILI-S-E3ILI95-MB-E3
System SensorApollo Sensor
Inteligent Loop Interfrace, Supplemental (max-2)Intelligent Loop Interface, Mother Board (max-1)
ILI95-S-E32-Batteries
Apollo Sensor Intelligent Loop Interface, Supplemental (max-2)Maximum 18 AH CapacityX
Optional ComponentsE3-BP1100-0450
Inner Door Filler PlateInner Door Filler Plate
Double Size Inner Door Blank Plate Single Size Inner Door Blank Plate
1100-0455DACT-E3
Switch ModuleDACT
ASM-16 Programmable Switch ModuleDigital Alarm Communication Transmitter
RPT-E3-UTPFLS-E3
Networking CardFiber Networking
Network Repeater, Unshielded Twisted-Pair Fiber Network Module, Single-Mode Fiber, 1 ChannelFiber Network Module, Multi-Mode Fbier, 1 FML-E3 Fiber NetworkingChannel7 A/H Seismic Battery Bracket Kit90518
905207 A/H Seismic18 A/H Seismic 18 A/H Seismic Battery Bracket Kit
E3 Cabinet C, Trim RingsE3-TRIMKIT-C
E3 Series and S3 Series Building Blocks Reference Guide
-
DACT -E3RP T-E 3
PM -9 /PM -9G
IN I-VG SER IES
ILI-MB-E3 /IL I95-MB-E3
CAB INET C ,
AM- 50 EXT ENDER PL AT EAM-5 0SER IES
L C D - E 3K E Y P A D
TELEPHONE BO X
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
E3/S3 Series FACP Panel Configurations
2.4 E3 Series Fire/Audio C Size Cabinet Ordering E3 Series Fire/Audio C Size Cabinet Ordering Information
InformationThe E3 Series C Size Cabinet is used to house the components and amplifiers that support the E3 Series Fire and Voice Evacuation Systems. Figure 2.4.1 illustrates the E3 Series Fire/Audio C Size cabinet configuration. Table 2.4.1 lists the E3 Series Fire/Audio, C Size cabinet ordering information.
Figure 2.4.1 E3 Series Fire/Audio C Size Cabinet Configuration
Qty Part Number Model Number Description List PriceNote: X represents required components.
Cabinet Dimensions:XX
E3BB-BC/INCCE3-INCC-C PLATE
30H x 19 3/8W x 4 1/2DMounting Plate
Enclosure, Command Center Black, C Size Command Center Mounting Plate, C Size
XX
E3ID2-CLCD-E3
2 Slots DoorDisplay
Inner Door, Command Center, 2 Slots C Size LCD Keypad Display
X 1100-04521100-0455
MICASM-16
INCC-MIC, Paging MicrophoneProgrammable Switch Module
1100-0451ILI-MB-E3
INCC-TELSystem Sensor
Command Center Firefighter Telephone ModuleIntelligent Loop Interface, Mother Board X
ILI95-MB-E3PM-9
Apollo SensorPower Supply
Intelligent Loop Interface, Mother Board 9 Ampere Power SupplyX
1100-13231100-1324
INI-VGX-FOINI-VGX-UTP
Transponder Voice Gateway Fiber-OpticTransponder Voice Gateway Twisted-Pair WireX
X AM-50-PlateOptional Components
AM50-Extender Plate Amplifier Extender Plate (Supports One AM-50)
1100-0456AM-50-70
AM-50-2570V Amp
AM-50 Watt Amplifier (max-1)70V 50 Watt amplifier (max-1)
90521E3-TRIMKIT-C
Line Filter AC Line Filter Required with 70V Amplifier Trim Ring Kit
DACT-E3RPT-E3-UTP
DACTNetworking Card
Digital Alarm Communication TransmitterNetwork Repeater, Unshielded Twisted-Pair Wire
FSL-E3 Fiber Networking Fiber Network Module, Single-Mode Fiber, 1 Channel
FML-E3E3-BP
Fiber NetworkingBlank Plate
Fiber Network Module, Multi-Mode Fiber,Inner Door Panel, Double Size
1 Channel
1100-0450 Blank PlateTable 2.4.1 E3 Series Fire/Audio C Size Cabinet Ordering Information
Inner Door Panel, Single Size
18
-
DACT-E3RPT-E3
PM-9/PM-9G
ILI-S-E3,ILI95-S-E3SERIESOR ANXILI-S-E3,
ILI95-S-E3SERIESOR ANX
ILI-S-E3,ILI95-S-E3SERIESOR ANX
LCD-E3DISPLAY
P/N 9021-60764:A1 01/30/2015Table 2.5.1 E3 Series D Size Cabinet Ordering Information
19
E3 Series D Size Cabinet Ordering Information
2.5 E3 Series D Size Cabinet Ordering InformationE3/S3 Series FACP Panel Configurations
The E3 Series D Size Cabinet is used to house the components that support the E3 Series Fire Evacuation System. Figure 2.5.1 illustrates the E3 Series, D Size cabinet configuration. Table 2.5.1 lists the E3 Series, D Size cabinet ordering information.
Figure 2.5.1 E3 Series D Size Cabinet Configuration
Qty Part Number Model Number Description List PriceNote: X represents required components.
Cabinet Dimensions:X E3BB-BD/INCC
E3BB-RD/INCC41H x 19 3/8W x 4 1/2D41H x 19 3/8W x 4 1/2D
E3 Enclosure, Black, D SizeE3 Enclosure, Red, D Size
XX
E3-INCC-D PLATEE3ID2-D
Back Plate used for FACP or Command Center Inner Door, 2 Slot, D SizeUsed for LCD-E3
Used with NGAE3ID3-DModules
Inner Door, 3 Slot, D Size
X LCD-E31100-0505
DisplayNGA
LCD Keypad DisplayNetwork Graphic Annunciator
XX
PM-9ILI-MB-E3
Power SupplySystem Sensor
9 Ampere Power SupplyIntelligent Loop Interface, Mother Board (max-1)
ILI-S-E3ILI95-MB-E3
System SensorApollo Sensor
Inteligent Loop Interfrace, Supplemental (max-6)Intelligent Loop Interface, Mother Board (max-1)
ILI95-S-E32-Batteries
Apollo Sensor Intelligent Loop Interface, Supplemental (max-6)Maximum 18 AH CapacityX
Optional ComponentsE3-BP1100-0450
Inner Door Filler PlateInner Door Filler Plate
Double Size Inner Door Blank Plate Single Size Inner Door Blank Plate
1100-0455DACT-E3
Switch ModuleDACT
ASM-16 Programmable Switch ModuleDigital Alarm Communication Transmitter
RPT-E3-UTPFSL-E3
Networking CardFiber Networking
Network Repeater, Unshielded Twisted-Pair Fiber Network Module, Single-Mode Fiber, 1 ChannelFiber Network Module, Multi-Mode Fiber, 1 FML-E3 Fiber NetworkingChannel7 A/H Seismic Battery Bracket Kit90518
905207 A/H Seismic18 A/H Seismic 18 A/H Seismic Battery Bracket Kit
E3 Cabinet D, Trim RingsE3-TRIMKIT-D
E3 Series and S3 Series Building Blocks Reference Guide
-
4
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
E3/S3 Series FACP Panel Configurations
2.6 S3-Slim Cabinet Ordering InformationS3-Slim Cabinet Ordering Information
The S3-Slim Cabinet is used to house the modules that support the S3 Series Small Addressable Fire Alarm Control Panel System. Figure 2.6.1 illustrates the S3-Slim cabinet configuration. Table 2.6.1 lists the components that can be ordered for the S3 Slim cabinet.
Figure 2.6.1 S3 Slim Cabinet
DACT-E3 RPT-E3-UTP 14 1/8"
20 1/8"
LCD-SLP
SLP-E3
SLC-PM/SLC95-PM #1
SLC-PM/SLC95-PM #2
FLPS-7
SLC-PM
Qty Part Number Model Number Description ListPriceNote: X represents the required components. Cabinets Dimensions:X SLP-BLK 14 1/8W x 20 1/8H x 4 1/2D Smart Loop Panel Addressable FACP in black
enclosure.SLP-RED 14 1/8W x 20 1/8H x 4 1/2D Smart Loop Panel Addressable FACP in red
enclosure.X SLC-PM System Sensor SLC module Velociti SLC loop 318 devices. Requires 1 or 2
devices used for SLC loops.SLC95-PM Apollo SLC module Apollo SLC loop 126 devices. Requires 1 or 2
devices used for SLC loops.LCD-SLP S3 Main Display LCD Touch screen display unit (shipped with SLP-
BLK).FLPS-7-RB2 Batteries
7 amp Power Supply Power Supply unit (shipped with SLP-BLK) 12 A/H BatteriesX
Optional ComponentsDACT-E3RPT-E3-UTP
DialerNetworking Card
Digital Alarm Communication TransmitterNetwork repeater, unshielded twisted-pair
FSL-E3 Fiber Networking Fiber Network Module, Single-Mode Fiber, 1 channel
FML-E3 Fiber Networking Fiber Network Module, Multi-Mode Fiber, 1 channel
Table 2.6.1 S3-Slim Cabinet Ordering Information
20
-
DACT-E3
RPT-E3
PM-9/PM-9G
INI-VGSERIES
ILI-MB-E3/ILI95-MB-E3
CABINET C,AM-5 0EXTENDERPLATE
AM-50SERIES
TELEPHONEBOX
TELEPHON EBOX
NGA
D ACT- E 3RP T- E 3
PM-9/ PM-9GIN I- VGS ER I E S
IL I- E 3, I LI 95- E 3S ERI ES ORANX
IL I- E 3, I LI 95- E 3S E RIE S O RANX
P/N 9021-60764:A1 01/30/2015 21
Section 3: Basic E3 Series In-Building Mass Notification Cabinet Configurations
E3BB-BC/INCC C CAB COMBINATION
FIRE/ACU
E3BB-BD/INCC D CAB COMBINATION
FIRE/ACU
NGA
E3 Series and S3 Series Building Blocks Reference Guide
-
DACT -E3
RPT -E3
PM-9/PM-9G
IN I-VG SERIES
ILI -MB-E3/ILI95-MB-E3
CABINET C,AM-5 0 EXTENDER PLATE
AM -50SERIE S
TE LEPHONEBOX
E3 Series and S3 Series Building Blocks Reference Guide Table 3.1.1 E3 Series ACU C Size Cabinet for Combination Fire/MNS System Ordering Information
P/N 9021-60764:A1 01/30/2015
Basic E3 Series In-Building Mass Notification Cabinet Configurations3.1 E3 Series ACU C Size Cabinet used for Combination
E3 Series ACU C Size Cabinet used for Combination
Fire/MNS System (NGA Display) Ordering InformationThe E3 Series ACU C Size Cabinet is used to house the components that support the E3 Series Combined Fire/Mass Notification System. Figure 3.1.1 illustrates the E3 Series ACU C Size cab- inet configuration. Table 3.1.1 lists the E3 Series ACU C Size cabinet ordering information.
Figure 3.1.1 E3 Series ACU C Size Configuration
NGA
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:XX
E3BB-BC/INCCE3-INCC-C PLATE
30H x 19 3/8W x 4 1/2DMounting Plate
Enclosure, Command Center Black, C Size Command Center Mounting Plate, C Size
X E3ID3-CModules
3 Slots Door Inner Door, Command Center, 3 Slots C Size
XX
1100-05051100-0452
NGAMIC
NGA, Network Graphic AnnunciatorINCC-MIC, Paging Microphone
1100-04551100-0451
ASM-16INCC-TEL
Programmable Switch ModuleCommand Center Firefighter Telephone Module
X ILI-MB-E3ILI95-MB-E3
System SensorApollo Sensor
Intelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Mother Board (max-2)
X PM-91100-1321
Power SupplyINI-VGC-FO
9 Ampere Power SupplyCommand Center Voice Gateway Fiber-Optic
1100-13221100-1323
INI-VGC-UTPINI-VGX-FO
Command Center Voice Gateway Twisted-Pair Transponder Voice Gateway Fiber-Optic
1100-13241100-1325
INI-VGX-UTPINI-VGE-FO
Transponder Voice Gateway Twisted-Pair WireClassic Voice Gateway Fiber-Optic
1100-1326Optional Components
INI-VGE-UTP Classic Voice Gateway Twisted-Pair Wire
AM-50-Plate1100-0456
AM50-Extender PlateAM-50-25
Amplifier Extender Plate (Supports One AM-50) AM-50 Watt Amplifier (max-1)
AM-50-7090521
70V AmpLine Filter
70V 50 Watt amplifier (max-1)AC Line Filter Required with 70V Amplifier
90492E3-TRIMKIT-C
Thumb Lock Thumb Quarter Turn LatchTrim Ring Kit
DACT-E3RPT-E3-UTP
DACTNetworking Card
Digital Alarm Communication TransmitterNetwork Repeater, Unshielded Twisted-Pair
FSL-E3FML-E3
Fiber NetworkingFiber Networking
Fiber Network Module, Single-Mode Fiber Network Module, Multi-Mode Fiber,
Fiber, 1 Channel1 Channel
22
-
TELEPHON EBOX
NGA
D A C T- E 3RP T- E 3
PM-9/PM-9GIN I- V GS E R I E S
IL I- E 3, I LI 95- E 3S E RI E S ORA NX
IL I- E 3, I LI 95- E 3S E R IE S O RA NX
P/N 9021-60764:A1 01/30/2015Table 3.2.1 E3 Series ACU D Size Cabinet Combination Fire/MNS System
23
E3 Series ACU D Size Cabinet used for Combination Fire/MNS System (NGA Display) Ordering Information Basic E3 Series
3.2 E3 Series ACU D Size Cabinet used for Combination Fire/MNS System (NGA Display) Ordering Information
The E3 Series ACU D Size Cabinet is used to house the components that support the E3 Series Combined Fire/Mass Notification System. Figure 3.2.1 illustrates the E3 Series ACU D Size cab- inet configuration. Table 3.2.1 lists the E3 Series ACU C Size cabinet ordering information.
Figure 3.2.1 E3 Series ACU D Size Cabinet ConfigurationList Qty Part Number Model Number Description Price
Note: X represents the required components. Cabinet Dimensions:XX
E3BB-BD/INCCE3-INCC-D PLATE
41H x 19 3/8W x 4 1/2DMounting Plate
Enclosure, Command Center Black, D Size Command Center Mounting Plate, D Size
X E3ID3-DModules
3 Slots Door Inner Door, Command Center, 3 Slots D Size
XX
1100-05051100-0452
NGAMIC
NGA, Network Graphic AnnunciatorINCC-MIC, Paging Microphone
1100-04551100-0451
ASM-16INCC-TEL
Programmable Switch ModuleCommand Center Firefighter Telephone Module
X ILI-MB-E3ILI-S-E3
Loop InterfaceLoop Interface
Intelligent Loop Interface, Mother Board Intelligent Loop Interface, Supplemental
ILI95-MB-E3ILI95-S-E3
Loop InterfaceLoop Interface
Intelligent Loop Interface, Mother Board XP95 Intelligent Loop Interface, Supplemental XP95
X PM-91100-1321
Power SupplyINI-VGC-FO
9 Ampere Power SupplyCommand Center Voice Gateway Fiber-Optic
1100-13221100-1323
INI-VGC-UTPINI-VGX-FO
Command Center Voice Gateway Twisted-Pair Transponder Voice Gateway Fiber-Optic
1100-13241100-1325
INI-VGX-UTPINI-VGE-FO
Transponder Voice Gateway Twisted-Pair WireClassic Voice Gateway Fiber-Optic
1100-1326Optional Components
INI-VGE-UTP Classic Voice Gateway Twisted-Pair Wire
1100-0456AM-50-70
AM-50-2570V Amp
AM-50 Watt Amplifier (max-1)70V 50 Watt amplifier (max-1)
9052190492
Line FilterThumb Lock
AC Line Filter Required with 70V Amplifier Thumb Quarter Turn Latch
E3-TRIMKIT-CDACT-E3
Trim Ring KitDigital Alarm Communication TransmitterDACT
Networking CardRPT-E3-UTPFSL-E3
Network Repeater Twisted-Pair WireFiber Network Module, Single-Mode Fiber Networking
Fiber NetworkingFiber, 1 Channel
1 ChannelFML-E3 Fiber Network Module, Multi-Mode Fiber,
E3 Series and S3 Series Building Blocks Reference Guide
-
IN I-VG SERIES
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series In-Building Mass Notification LOC Configurations
Section 4: Basic E3 Series In-Building Mass Notification LOC Configurations
LOC
LOC-TEL
NGA
24
-
IN I-VG SERIES
P/N 9021-60764:A1 01/30/2015 25
E3 Series LOC Local Operating Console Ordering Information
4.1 E3 Series LOC Local Operating Console Ordering Basic E3 Series In-Building Mass Notification LOC
InformationThe E3 Series LOC Local Operating Console is used to house the components that support the remote audio modules of the E3 Series Combined Fire/Mass Notification System. Figure 4.1.1 illustrates the E3 Series LOC Local Operating Console cabinet configuration. Table 4.1.1 lists the E3 Series LOC Local Operating Console ordering information.
Figure 4.1.1 E3 Series LOC Local Operating Console
NGA
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:XX
E3BB-BAAE3ID3-A
19 1/4W x 10H x 4 1/4 D3 Slots Door
Enclosure, Black, AA Size CabinetInner Door, 3 Slots
Modules1100-1321X
XVoice GatewayMIC
INI-VGC, Voice GatewayINCC-MIC, Paging Microphone1100-0452
1100-0455XX
ASM-16NGA
Programmable Switch ModuleNGA, Network Graphic Annunciator1100-04-5
Optional Components AOM-2SF
90492LOC Lock-out Addressable Output Supervised Relay
Thumb Quarter Turn LatchE3-TRIMKIT-A Trim Ring Kit
Table 4.1.1 E3 Series LOC Local Operating Console Ordering Information
E3 Series and S3 Series Building Blocks Reference Guide
-
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series In-Building Mass Notification LOC Configurations E3 Series LOC-TEL Local Operating Console Ordering
4.2 E3 Series LOC-TEL Local Operating Console Ordering Information
The E3 Series LOC-TEL Local Operating Console is used to house the components that support the remote audio modules of the E3 Series Combined Fire/Mass Notification System. Figure 4.2.1 illustrates the E3 Series LOC Local Operating Console configuration. Table 4.2.1 lists the E3 Series LOC Local Operating Console ordering information
Figure 4.2.1 E3 Series LOC-TEL Local Operating Console
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:XX
E3BB-BAAE3ID2-TA
19 1/4 x 10H x 4 1 /2D2 Slots Door
Enclosure, Black, AA Size CabinetInner Door, 2 Slots for INCC-Tel
X 90510Modules
AOM-TEL PLATE KIT, AOM-TEL Plate, E3
XX
1100-04511100-0455
INCC-TELASM-16
Firefighter Telephone ModuleProgrammable Switch Module
XX
AOM-TELF1N4006
Monitor ModuleBlocking Diode
Telephone Monitor Module
Optional Components90492 Thumb Lock Thumb Quarter Turn Latch
Trim Ring KitE3-TRIMKIT-ATable 4.2.1 E3 Series LOC-TEL Local Operating Console Ordering Information
26
-
INI-VGX
AM-50SERIESAM-50SERIES
BATTERIES
DACT-E3RPT-E3
INI-VGSERIES
AM-50SERIES
AM-50SERIESBATTERIES
BATTERIES
DACT-E3RPT-E3
PM-9/PM-9G
INI-VGSERIES
AM-50SERIES
AM-50SERIES
ILI-MB-E3/ILI95-MB-E3
P/N 9021-60764:A1 01/30/2015 27
Basic E3 Series Audio Transponder Cabinet Configurations
Section 5: Basic E3 Series Audio Transponder Cabinet Configurations
INX-Transponder CAB-B
INX-Transponder CAB-C
INX-Transponder CAB-D
INX CAB-B
INX D CABINET,E3-INX-D PLATE
E3 Series and S3 Series Building Blocks Reference Guide
-
INI-VGX
AM-50SERIESAM-50SERIES
BATTERIES
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series Audio Transponder Cabinet Configurations E3 Series INX CAB-B Cabinet Ordering Information
5.1 E3 Series INX CAB-B Cabinet Ordering InformationThe E3 Series INX CAB-B cabinet is used to house the components that support the E3 Series Voice Evacuation and the Combined Fire/Mass Notification Systems. Figure 5.1.1 illustrates the E3 Series INX CAB-B cabinet configuration. Table 5.1.1 lists the E3 Series INX CAB-B cabinet ordering information.
Figure 5.1.1 E3 Series INX CAB-B Cabinet Configuration
INX CAB-B
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:
INX CAB-B1100-0460
19 3/8W x 19 3/8H x 4 1/2DCabinetX Enclosure, INX CAB-B, B Size
ModulesPM-9X
XPower SupplyINI-VGX
9 Ampere Power SupplyVoice Gateway1100-1323
NOTE: Only one type of 50 Watt amplifier may be connected to the INI-VGX (25V or 70V).
1100-0456AM-50-70
AM-50-25AM-50-70
25 Volt 50 Watt Amplifier70 Volt 50 Watt Amplifier
2 Batteries90521
18 A/HAC Line Filter, Required with 70V AmplifierAC Line Filter
Optional ComponentsE3-TRIMKIT-B Trim Ring Kit
E3 CAB-B 7 A/H Seismic Battery Bracket Kit9051890519
7 A/H Seismic Kit12 A/H Seismic Kit E3 CAB-B 12 A/H Seismic Battery Bracket Kit
E3 CAB-B 18 A/H Seismic Battery Bracket Kit90520 18 A/H Seismic KitTable 5.1.1 E3 Series INX CAB-B Cabinet Ordering Information
28
-
DACT-E3RPT-E3
INI-VGSERIES
AM-50SERIES
AM-50SERIESBATTERIES
P/N 9021-60764:A1 01/30/2015 29
E3 Series INX CAB-C Cabinet Ordering Information5.2 E3 Series INX CAB-C Cabinet Ordering Information
Basic E3 Series Audio Transponder Cabinet Configurations
The E3 Series INX CAB-C cabinet is used to house the components that support the E3 Series Voice Evacuation and the Combined Fire/Mass Notification Systems. Figure 5.2.1 illustrates the E3 Series INX CAB-C cabinet configuration. Table 5.1.1 lists the E3 Series INX CAB-C cabinet ordering information.
Figure 5.2.1 E3 Series INX CAB-C ConfigurationQty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:
INX CAB-CE3BB-BC/INX
19 3/8W x 30H x 4 1/2DINX, CabinetX
XEnclosure, Transponder, Black, C SizeINX-C Mounting PlateE3-INX-C Plate
90375INX-C PlatePM-9 Adapter PlateX PM-9 Adapter Plate Kit, Harware, E3-INX
ModulesPM-9X
XPower SupplyINI-VGX
9 Ampere Power SupplyVoice Gateway1100-1323
1100-0456 AM-50-25 25 Volts 50 Watt Amplifier
NOTE: Only one type of 50 Watt amplifier may be connected to the INI-VGX (25V or 70V).
AM-50-7090521
AM-50-70AC Line Filter
70 Volt 50 Watt AmplifierAC Line Filter, Required with 70V Amplifier
2Optional Components
Batteries 2-18 AH
ILI-MB-E3ILI95-MB-E3
SLCSLC
Intelligent Loop Interface, Mother BoardXP95 Intelligent Loop Interface, Mother Board
DACT-E3RPT-E3-UTP
DACTNetworking Card
Digital Alarm Communication TransmitterNetwork Repeater, Unshielded Twisted-Pair
FLS-E3FML-E3
Fiber NetworkingFiber Networking
Fiber Network Module, Single-Mode Fiber Network Module, Multi-Mode Fiber,
Fiber, 1 Channel1 Channel
E3-TRIMKIT-C90518
Trim Ring KitE3 CAB-C 7 A/H Seismic Battery Kit7 A/H Seismic Kit
12 A/H Seismic Kit9051990520
E3 CAB-C 12 A/H Seismic Battery Kit E3 CAB-C 18 A/H Seismic Battery Kit18 A/H Seismic Kit
Table 5.2.1 E3 Series INX CAB-C Cabinet Ordering Information
E3 Series and S3 Series Building Blocks Reference Guide
-
BATTERIES
DACT-E3RPT-E3
PM-9/PM-9G
INI-VGSERIES
AM-50SERIES
AM-50SERI ES
ILI-MB-E3 /ILI95-MB-E3
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Basic E3 Series Audio Transponder Cabinet Configurations5.3 E3 Series INX CAB-D Cabinet Ordering Information
E3 Series INX CAB-D Cabinet Ordering Information
The E3 Series INX CAB-D cabinet is used to house the components that support the E3 Series Voice Evacuation and the Combined Fire/Mass Notification Systems. Figure 5.3.1 illustrates the E3 Series INX CAB-D cabinet configuration. Table 5.3.1 lists the E3 Series INX CAB-D cabinet ordering information.
Figure 5.3.1 E3 Series INX CAB-D Cabinet Configuration
INX D CABINET, E3-INX-D PLATE
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:
INX CAB-DE3BB-BD/INX
19 3/8W x 41H x 4 1/2DINX, CabinetX
XEnclosure, Transponder, Black, D SizeINX-D Mounting PlateE3-INX-D Plate
ModulesINX-D Plate
XX
PM-91100-1323
Power SupplyINI-VGX
9 Ampere Power SupplyTransponder Voice Gateway
1100-0456 AM-50-25 25 Volts 50 Watt Amplifier
NOTE: Only one type of 50 Watt amplifier may be connected to the INI-VGX (25V or 70V).
AM-50-7090521
AM-50-70AC Line Filter
70 Volt 50 Watt AmplifierAC Line Filter, Required with 70V Amplifier
2Optional Components
Batteries 2-18 AH
ILI-MB-E3ILI95-MB-E3
SLC CardXP95 SLC
Intelligent Loop Interface, Mother BoardXP95 Intelligent Loop Interface, Mother Board
DACT-E3RPT-E3-UTP
DACTNetworking Card
Digital Alarm Communication TransmitterNetwork Repeater, Unshielded Twisted-Pair
FSL-E3FML-E3
Fiber NetworkingFiber Networking
Fiber Network Module, Sing-Mode Fiber Network Module, Multi-Mode Fiber,
Fiber, 1 Channel1 Channel
E3-TRIMKIT-D90518
Trim Ring KitE3 CAB-D 7 A/H Seismic Battery Kit7 A/H Seismic Kit
12 A/H Seismic Kit9051990520
E3 CAB-D 12 A/H Seismic Battery Kit E3 CAB-D 18 A/H Seismic Battery Kit18 A/H Seismic Kit
Table 5.3.1 E3 Series INX CAB -D Cabinet Ordering Information30
-
T -
T -
P/N 9021-60764:A1 01/30/2015 31
Section 6: E3 Series Classic Bulk Audio Cabinet Configurations
Bulk Audio SBB-C4
Bulk Audio SBB-D4
R - 1 8
R - 1 2 5
R - 1 8R - 1 2 5
R - 1 8 R - 1 2 5
A A- 1 0 0/ A A 1 2 0
A A- 1 0 0/ A A 1 2 0
A A- 1 0 0/ A A 1 2 0
AC
1
B a tte ryC h a rg e r
S B B -C 4
F C I-L L BB A T T E R Y B O X
R - 1 8
R - 1 2 5
R - 1 8R - 1 2 5
R - 1 8 R - 1 2 5
R - 1 8 R - 1 2 5
A A - 1 0 0 / A A 1 2 0
A A- 1 00/ A A120
A A - 1 00/A A120
A A - 1 0 0 / A A 1 2 0
AC
S B B - D 41
B a t t e r yC h a r g e r
F C I - L L BB A T T E R Y B O X
E3 Series and S3 Series Building Blocks Reference Guide
-
T -
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
E3 Series Classic Bulk Audio Cabinet Configurations E3 Series Classic, SBB-C4 Cabinet Ordering Information
6.1 E3 Series Classic, SBB-C4 Cabinet Ordering InformationThe E3 Series Classic, SBB-C4 Cabinet houses the components that support the bulk audio ampli- fiers required for the E3 Series Fire and Voice Evacuation Systems. Figure 6.1.1 illustrates the E3 Series Classic SBB-C4 cabinet configuration. Table 6.1.1 lists the E3 Series Classic SBB-C4 cabi- net ordering information.
Figure 6.1.1 E3 Series Classic, SBB-C4 Cabinet Configuration
R - 1 8
R - 1 2 5
R - 1 8R - 1 2 5
R - 1 8 R - 1 2 5
A A - 1 0 0/ A A 1 2 0
A A - 1 0 0/ A A 1 2 0
A A - 1 0 0/ A A 1 2 0
AC
S B B -C 4
1
B a t t e r y C h a r g e r
F C I - L L BB A T T E R Y B O X
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:XX
SBB-C4FCI-DR-C4B
24 W X 37 1/8 H X 5 1/8 D Blank Door
Backbox, Accepts 3 Chassis, BlackBlank Door, Lock & Keys, for 3 Chassis Backbox
ModulesAA-120 Bulk Audio Amplifier
Bulk Audio Amplifier120 W Amplifier 25 V RMS100 W Amplifier 70.7 VRMSAA-100
ACT-1XX
Audio Coupling Transformer (one required)Battery Charger, 25-120 A/H Gel CellFCI-CHG-120
FCI-LBBXOptional Components
Large Battery Box
MCH-6MMO-6SF
MCH-6 6-Unit Mounting ChassisMulti-Module Output, Relay
Table 6.1.1 E3 Series Classic SBB-C4 Cabinet Ordering Information
32
-
T -
P/N 9021-60764:A1 01/30/2015 33
E3 Series Classic SBB-D4 Ordering Information E3 Series Classic Bulk Audio Cabinet Configurations
6.2 E3 Series Classic SBB-D4 Ordering InformationThe E3 Series Classic, SBB-D4 Cabinet houses the components that support the bulk audio ampli- fiers required for the E3 Series Fire and Voice Evacuation Systems. Figure 6.2.1 illustrates the E3 Series Classic cabinet configuration. Table 6.2.1 lists the E3 Series Classic Bulk Audio cabinet ordering information.
Figure 6.2.1 E3 Series Classic, SBB-D4 Cabinet Configuration
R - 1 8
R - 1 2 5
R - 1 8R - 1 2 5
R - 1 8 R - 1 2 5
R - 1 8 R - 1 2 5
AA- 100/AA 120
AA- 100/ AA120
AA- 100/AA120
AA- 100/AA120
AC
1
BatteryC h a rg e r
S B B -D 4
F C I-L L BB A T T E R Y B O X
Qty Part Number Model Number Description List PriceNote: X represents the required components. Cabinet Dimensions:XX
SBB-D4FCI-DR-D4B
24 W x 45 7/8 H x 5 1/8 D Blank Door
Cabinet Backbox, Accepts 4 Chassis, BlackBlank Door, Lock & Keys, for 4 Chassis Backbox
ModulesAA-120 Bulk Audio Amplifier
Bulk Audio Amplifier120 W Amplifier 25 V RMS100 W Amplifier 70.7 VRMSAA-100
ACT-1XX
Audio Coupling Transformer (one required)Battery Charger, 25-120 A/H Gel CellFCI-CHG-120
FCI-LBBXOptional Components
Large Battery Box
MCH-6MMO-6SF
MCH-6 6-Unit Mounting ChassisMulti-Module Output, Relay
Table 6.2.1 E3 Series Classic SBB-D4 Cabinet Ordering Information
E3 Series and S3 Series Building Blocks Reference Guide
-
LCD-E3 ILI-MB-E3/ILI95-MB-E3
PM-9/PM-9G
DACT-E3
RPT-E3
60 0 X L B A C K BO X
D A C T - E 3 R P T -E 3P M -9 /P M -9 G
I L I -E 3 / I L I 9 5 -E 3 S ER IE S
6 0 0 X L B A C K P L A T E
6 0 0 X L R E T R O F I T D IS P LA Y
I N N E R D O O R
6 0 0 X L R E T R O F I T 3 - B A Y IN N E R
D O O R
D E A D F R O N T P L A T E F R O N T
C O V E R
F O R B A T T E R IE S ( 1 2 A /H )
L C D -E 3
A S M - 16
A S M -1 6
A S M - 1 6
I L I -S - E 3 /I L I 9 5 - S - E 3
PM-9 /PM-9 G
DAC T -E3R PT-E3
IL I- S- E3
7200 C A BINET B ,BACKBO XASM -16
ASM-1 6
LCD-E 3
DA CT -E 3R P T- E 3
PM - 9/ P M -9 G
I LI- S -E 3, ILI9 5- S -E3
S E RIE S O R AN X
I LI- S -E 3,ILI 95-
S - E 3S E R IE S O R AN X
IL I-S - E 3, I LI9 5-S -E 3
S E RIE S O R A NX
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Section 7: Retrofit Kit CabinetsRetrofit Kit Cabinets
IF600 Retrofit
600XL Retrofit
FCI 7200 B Retrofit
FCI 7200 CRetrofit
AC PO W ER ON
PO WER
FAUL T
GROUNDFAULT
ALARM
SYSTEM TRO UBLE
SUPERVISORY
SYSTEM
SILEN CED
ALARM ACKNOWL EDGE
TROUBLE ACKNOWL EDGE
SIGNALSIL ENCE
SYST E M RESET/ LAMP TEST
MENU
BACKSPACE /EDIT
OK/ENTER
O U T E R D O O RR E T R O F I T
6 0 0X L
72 00 CAB INET B , ADAPTER PLATE SUB-ASSEMBLY
7200 CABINET B,RE TRO FITINNER DOOR
7 20 0 CA B -B RE TROFITOUTER DOO R
7200 CABINET C,RE TRO F ITIN N E R DO O R
7 2 0 0 C A B -C R E TRO F ITO U TE R DO O R 7200 CAB-C BACKBOX
34
-
LCD-E3 ILI-MB-E3/ILI95-MB-E3
PM-9/PM-9G
DACT-E3
RPT-E3
P/N 9021-60764:A1 01/30/2015 35
IF600-Retrofit Backbox Ordering Information Retrofit Kit Cabinets
7.1 IF600-Retrofit Backbox Ordering InformationThe IF600-Retrofit backbox is used to house the components that support the E3 Series Fire Evac- uation System. Figure 7.1.1 illustrates the IF600-Retrofit backbox configuration. Table 7.1.1 lists the IF600-Retrofit backbox ordering information.
Figure 7.1.1 IF600 Retrofit Backbox Configuration
AC PO W ER ON
PO WER
FAUL T
GROUNDFAULT
ALARM
SYSTEM TRO UBL E
SUPERVISORY
SYSTEM
SILEN CED
AL ARM ACKNOWL EDGE
TROUBLE ACKNOWL EDGE
SIGNALSILENCE
SYSTEM RESET/
LAMP TEST
MENU
BACKSPACE /EDIT
OK/ENTER
Qty Part Number Model Number Description List PriceNote: X represents required components.
CabinetIF600-RETROFIT
Dimensions:20 1/8H x 14 1/8W x 4 1/2D E3BB-RBSLIM Door, Red, Back PlateX
ModulesILI-MB-E3 System Sensor
System SensorIntelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Supplemental (max-1)ILI-S-E3
ILI95-MB-E3XX
Apollo SensorApollo Sensor
Intelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Supplemental (max-1)ILI95-S-E3
PM-9XX
Power SupplyDisplay
9 Ampere Power SupplyLCD Keypad DisplayLCD-E3
Batteries2Optional Components DACT-E3 RPT-E3-UTP DACT
RepeaterDigital Alarm Communiocation TransmitterNetwork Repeater, Unshielded Twisted-Pair
RPT-E3-FO75687
RepeaterCableNetwork Repeater, Fiber-Optic 75687-A Special Order Cable Table 7.1.1 IF600 Retrofit Backbox Ordering Information
E3 Series and S3 Series Building Blocks Reference Guide
-
600XL BACKBOX--
600XL BACK PLATE
600XL RETROFIT DISPLAY
INNER DOOR
600XL RETROFIT 3-BAY INNER
DOOR
DEAD FRONT PLATE FRONT
COVER
FOR BATTERIES (12 A/H )
ASM-16
ASM-16
ASM-16
ILI-S-E3/ILI95-S-E3
600XLRETROFITOUTER DOOR
LCD -E3RPT-E 3
DACT-E 3
IL I-E3 /IL I95-E3 SER IES
PM -9/PM-9G
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Retrofit Kit Cabinets 600XL Retrofit Backbox Ordering Information
7.2 600XL Retrofit Backbox Ordering InformationThe 600XL Retrofit backbox is used to house the components that supports the E3 Series Fire Evacuation System. Figure 7.2.1 illustrates the 600XL Retrofit backbox configuration. Table 7.2.1 lists the 600XL Retrofit backbox ordering information.
Figure 7.2.1 600XL Retrofit Backbox Configuration
Qty Part Number Model Number Description List PriceNote: X represents required components.
Cabinet600XL RETROFIT
Dimensions:Gamewell IF 602XL, IF610XL, Includes Outer Door, Inner Door for the LCD-E3 XIF632 Cabinet Retrofit Kit for E3 Series Upgrade
and a Plate for (3) ASM-16s.Also includes a Dead Front Cover, Cabinet Mounting Plate for an E3 C-Size Plate. Intelligent Loop Module Mounting PlateX E3-ILI-CPLATE
ModulesUsed for FACP
X ILI95-MB-E3ILI95-S-E3
Apollo SensorApollo Sensor
Intelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Supplemental (max-1)
XX
LCD-E3PM-9
DisplayE3 Series Power Supply
LCD Keypad Display9 Ampere Power Supply
XOptional Components
2 Batteries Maximum 18 AH Capacity
1100-04501100-0455
Inner Door Filler PlateASM-16
Single Size Inner Door Blank Plate ASM-16 Programmable Switch Module
DACT-E3RPT-E3-UTP
DACTNetworking Card
Digital Alarm Communiocation TransmitterNetwork Repeater, Unshielded Twisted-Pair
FSL-E3 Fiber Networking Fiber Network Module, Single-Mode Fiber, 1 Channel
FML-E3RAN-7100
Fiber NetworkingRemote Serial Annunciator
Fiber Network Module, Multi-Mode Installs on GWRAN2-BB
Fiber, 1 Channel
Table 7.2.1 600XL Retrofit Backbox Ordering Information
36
-
PM-9 /PM-9G
DACT-E3RPT-E3
ILI-S-E3
7200 CABINET B,BACKBOXASM-16
P/N 9021-60764:A1 01/30/2015 37
7200 Retrofit Kit B Size Backbox Ordering Information Retrofit Kit Cabinets
7.3 7200 Retrofit Kit B Size Backbox Ordering InformationThe 7200 Retrofit Kit B Size backbox is used to house the components that upgrade the 7200 System to the E3 Series Fire Evacuation System. Figure 7.3.1 illustrates the 7200 Retrofit Kit B Size backbox configuration. Table 7.3.1 lists the 7200 Retrofit Kit B Size backbox ordering information.
Figure 7.3.1 7200 Retrofit Kit B Size Backbox Configuration
7200 CABINET B, ADAPTER PLATE SUB-ASSEMBLY
7200 CABINET B, RETROFIT INNER DOOR
7200 CAB-B RETROFITOUTER DOOR
Qty Part Number Model Number Description List PriceNote: X represents the required components.
Cabinet7200-B-RETROFIT
Dimensions:FCI 7200 B Size Backbox XRetrofit Kit for E3 Series upgrade
Includes Outer Door, Inner Door for LCD-E3 & ASM-16, Cabinet Mounting Plate for E3 C-Size PlateIntelligent Loop Module Mounting PlateX E3-ILI-CPLATE
ModulesUsed for FACP
X ILI-MB-E3ILI-S-E3
System SensorSystem Sensor
Intelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Supplemental (max-1)
XX
LCD-E3PM-9
DisplayPower Supply
LCD Keypad Display9 Ampere Power Supply
XOptional Components
2 Batteries Maxium 18 AH Capacity
1100-0455DACT-E3
ASM-16DACT
ASM-16 Programmable Switch ModuleDigital Alarm Communication Transmitter
RPT-E3-UTPFSL-E3
RepeaterFiber Networking
Network Repeater, Unshielded Twisted-Pair Fiber Network Module, Single-Mode Fiber, 1 ChannelFiber Network Module, Multi-Mode Fiber, FML-E3
1100-0450Fiber NetworkingBlank Plate
1 ChannelCommand Center, Blank Plate, Single Size
Table 7.3.1 7200 Retrofit Kit B Size Backbox Ordering Information
E3 Series and S3 Series Building Blocks Reference Guide
-
ASM-1 6
LCD-E3
DACT -E3RPT- E3
PM-9/PM-9 G
I LI- S -E3, ILI9 5- S -E3
SERIES O R ANX
I LI- S -E3,ILI 95-
S - E3SERIES O R ANX
IL I-S - E3, I LI9 5-S -E3
SERIES O R ANX
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015
Retrofit Kit Cabinets 7200 Retrofit Kit C Size Backbox Ordering Information
7.4 7200 Retrofit Kit C Size Backbox Ordering InformationThe 7200 Retrofit Kit C Size backbox is used to house the components that upgrade the 7200 System to the E3 Series Fire Evacuation System. Figure 7.4.1 illustrates the 7200 Retrofit Kit C Size backbox configuration. Table 7.4.1 lists the 7200 Retrofit Kit C Size backbox ordering information.
Figure 7.4.1 7200 Retrofit Kit C Size Backbox Configuration
7200 CABINET C,RETROFITINNER DOOR
7200 CAB -C RETROFITOUTER DOOR 7200 CAB-C BACKBOX
Qty Part Number Model Number Description List PriceNote: X represents the required components.
Cabinet7200-C-RETROFIT
Dimensions:FCI 7200-C-Size Backbox XRetrofit Kit for E3 Series upgrade
Includes Outer Door, Inner Door for LCD-E3 & ASM-16, Cabinet Mounting Plate for E3 D-Size Plate Intelligent Loop Module Mounting PlateX E3-INCC-DPLATE
ModulesUsed for FACP
X ILI-MB-E3ILI-S-E3
System SensorSystem Sensor
Intelligent Loop Interface, Mother Board (max-1) Intelligent Loop Interface, Supplemental (max-1)
XX
LCD-E3PM-9
DisplayPower Supply
LCD Keypad Display9 Ampere Power Supply
XOptional Components
2 Batteries Maximum 18 AH Capacity
1100-0455DACT-E3
ASM-16DACT
ASM-16 Programmable Switch ModuleDigital Alarm Communication Transmitter
1100-0450RPT-E3-UTP
Inner Door Filler PlateNetworking Card
Single Size Inner Door Blank PlateNetwork Repeater, Unshielded Twisted-Pair
FSL-E3 Fiber Networking Fiber Network Module, Single-Mode Fiber, 1 Channel
FML-E3 Fiber Networking Fiber Network Module, Multi-Mode Fiber, 1 Channel
Table 7.4.1 7200 Retrofit Kit C Size Backbox Ordering Information
38
-
Manufacturer Warranties and Limitation of LiabilityManufacturer Warranties.Manufacturer warrants that the Products manufactured by it in its
Subject to the limitations set forth herein,
Northford, Connecticut facility and sold by it to its authorized Distributors shall be free, under normal use and service, from defects in material and workmanship for a period of thirty six months (36) months from the date of manufacture (effective Jan. 1, 2009). The Products manufactured and sold by Manufacturer are date stamped at the time of production. Manufacturer does not warrant Products that are not manufactured by it in its Northford, Connecticut facility but assigns to its Distributor, to the extent possible, any warranty offered by the manufacturer of such product. This warranty shall be void if a Product is altered, serviced or repaired by anyone other than Manufacturer or its authorized Distributors. This warranty shall also be void if there is a failure to maintain the Products and the systems in which they operate in proper working conditions.MANUFACTURER MAKES NO FURTHER WARRANTIES, AND DISCLAIMS ANY AND ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, WITH RESPECT TO THE PRODUCTS, TRADEMARKS, PROGRAMS AND SERVICES RENDERED BY MANUFACTURER INCLUDING WITHOUT LIMITATION, INFRINGEMENT, TITLE, MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. MANUFACTURER SHALL NOT BE LIABLE FOR ANY PERSONAL INJURY OR DEATH WHICH MAY ARISE IN THE COURSE OF, OR AS A RESULT OF, PERSONAL, COMMERCIAL OR INDUSTRIAL USES OF ITS PRODUCTS.This document constitutes the only warranty made by Manufacturer with respect to its products and replaces all previous warranties and is the only warranty made by Manufacturer. No increase or alteration, written or verbal, of the obligation of this warranty is authorized. Manufacturer does not represent that its products will prevent any loss by fire or otherwise.Warranty Claims.Manufacturer's discretion, each part returned by its authorized
Manufacturer shall replace or repair, at
Distributor and acknowledged by Manufacturer to be defective, provided that such part shall have been returned to Manufacturer with all charges prepaid and the authorized Distributor has completed Manufacturer's Return Material Authorization form. The replacement part shall come from Manufacturer's stock and may be new or refurbished. THE FOREGOING IS DISTRIBUTOR'S SOLE AND EXCLUSIVE REMEDY IN THE EVENT OF A WARRANTY CLAIM.
Warn-HL-08-2009.fm
E3 Series and S3 Series Building Blocks Reference Guide P/N 9021-60764:A1 01/30/2015 39
-
Gamewell-FCI 12 Clintonville Road Northford, CT 06472-1610 USA 203-484-7161 fax 203-484-7118
www.gamewell-fci.com
Tabla de contenidosSeccin 1: Bsico E3 Series remoto configuraciones1.1 E3 Serie anunciador remoto, informacin del gabinete E3BB-BAA11.2 E3 Serie anunciador remoto, informacin del gabinete E3BB-BA21.3 E3 Serie anunciador remoto, informacin del gabinete E3BB-ras-LCD1.4 E3 Anunciador remoto, informacin del gabinete E3BB-NGA-FLUSH1.5 E3 Serie anunciador remoto, E3BB-BAA con E3ID2-A interior puerta gabinete informacin1.6 E3 Serie anunciador remoto, informacin del gabinete RAN-71001.7 KDU-Retrofit gabinete informacin para hacer pedidos
Seccin 2: E3/S3 serie Panel FACP configuraciones2.1 E3 Series B-Slim gabinete informacin para hacer pedidos2.2 E3 Gabinete de tamao "B" la serie informacin para hacer pedidos2.3 E3 Serie "C" tamao gabinete informacin para hacer pedidos2.4 E3 Series Fire/Audio "C" tamao gabinete informacin para hacer pedidos2.5 E3 Gabinete de tamao "D" la serie informacin para hacer pedidos2.6 S3-Slim gabinete informacin para hacer pedidos
Seccin 3: E3 bsica serie configuraciones del gabinete de notificacin masiva en construccin3.1 E3 Series ACU gabinete tamao "C" utilizado para informacin de pedido de combinacin incendio/MNS sistema (NGA Display)3.2 E3 Series ACU "D" tamao gabinete usado para informacin de pedido de combinacin incendio/MNS sistema (NGA Display)
Seccin 4: Bsico E3 Series In-Building notificacin masiva LOC configuraciones4.1 E3 Series LOC locales operando consola informacin para hacer pedidos4.2 E3 Series LOC-TEL Local de funcionamiento consola informacin para hacer pedidos
Seccin 5: E3 bsica serie Audio transpondedor configuraciones del gabinete5.1 E3 Series INX CAB-B gabinete informacin para hacer pedidos5.2 E3 Series INX CAB-C gabinete de informacin para hacer pedidos5.3 E3 Series INX CAB-D gabinete informacin para hacer pedidos
Seccin 6: E3 Series clsicas a granel Audio gabinete configuraciones6.1 E3 Series clsica, informacin para pedidos del gabinete SBB-C46.2 E3 Series clsicas SBB-D4 informacin para pedidos
Seccin 7: Surgir gabinetes7.1 IF600-Retrofit Backbox informacin para hacer pedidos7.2 600XL modificacin Backbox informacin para hacer pedidos7.3 7200 retrofit Kit "B" tamao Backbox informacin para hacer pedidos7.4 7200 surgir "C" tamao Backbox informacin para hacer pedidos